version 0.7.1

This reverts commit 73441c4ed3.

README.md

@@ -6,6 +6,7 @@ It wraps `iptables`, `dnsmasq` etc. stuff. Use in one command, restore in one co
 
 [Linux-Router News & Developer Notes 📰](https://github.com/garywill/linux-router/issues/28) | [More tools and projects 🛠️](https://garywill.github.io) | [🍻 Buy me a coffee ❤️](https://github.com/garywill/receiving/blob/master/receiving_methods.md)
 
+
 ## Features
 
 Basic features:
@@ -61,6 +62,31 @@ Internet----(eth0/wlan0)-Linux-(eth1)------Another PC
 Internet----(eth0/wlan0)-Linux-(virtual interface)-----VM/container
 ```
 
+## Install
+
+1-file-script. Release on [Linux-router repo on Github](https://github.com/garywill/linux-router). Just download and run the bash script (meet the dependencies). In this case use without installation.
+
+> I'm currently not packaging for any distro. If you do, open a PR and add the link (can be with a version badge) to list here
+
+| Linux distro |                                                                                                            |
+| ------------ | ---------------------------------------------------------------------------------------------------------- |
+| Any          | download [1-file-script](https://raw.githubusercontent.com/garywill/linux-router/master/lnxrouter) and run without installation |
+
+### Dependencies
+
+- bash
+- procps or procps-ng
+- iproute2
+- dnsmasq
+- iptables (or nftables with `iptables-nft` translation linked)
+- WiFi hotspot dependencies
+  - hostapd
+  - iw
+  - iwconfig (you only need this if 'iw' can not recognize your adapter)
+  - haveged (optional)
+
+
+
 ## Usage
 
 ### Provide Internet to an interface
@@ -98,7 +124,7 @@ sudo lnxrouter -i eth1 -o isp5  --no-dns  --dhcp-dns 1.1.1.1  -6 --dhcp-dns6 [26
 
 </details>
 
-### LAN without Internet
+### Create LAN without providing Internet
 
 <details>
 
@@ -342,7 +368,7 @@ Options:
                             Using this you can't use same wlan interface
                             for both Internet and AP
     --virt-name <name>      Set name of virtual interface
-    -c <channel>            Channel number (default: 1)
+    -c <channel>            Specify channel (default: use current, or 1 / 36)
     --country <code>        Set two-letter country code for regularity
                             (example: US)
     --freq-band <GHz>       Set frequency band: 2.4 or 5 (default: 2.4)
@@ -356,13 +382,28 @@ Options:
                             (defaults to /etc/hostapd/hostapd.accept)
     --hostapd-debug <level> 1 or 2. Passes -d or -dd to hostapd
     --isolate-clients       Disable wifi communication between clients
-    
-    --ieee80211n            Enable IEEE 802.11n (HT)
-    --ieee80211ac           Enable IEEE 802.11ac (VHT)
-    --ht_capab <HT>         HT capabilities (default: [HT40+])
-    --vht_capab <VHT>       VHT capabilities
-    
     --no-haveged            Do not run haveged automatically when needed
+    --hs20                  Enable Hotspot 2.0
+
+    WiFi 4 (802.11n) configs:
+    --wifi4                 Enable IEEE 802.11n (HT)
+    --req-ht                Require station HT (High Throughput) mode
+    --ht-capab <HT caps>    HT capabilities (default: [HT40+])
+
+    WiFi 5 (802.11ac) configs:
+    --wifi5                 Enable IEEE 802.11ac (VHT)
+    --req-vht               Require station VHT (Very High Thoughtput) mode
+    --vht-capab <VHT caps>  VHT capabilities
+    
+    --vht-ch-width <index>  Index of VHT channel width:
+                                0 for 20MHz or 40MHz (default)
+                                1 for 80MHz
+                                2 for 160MHz
+                                3 for 80+80MHz (Non-contigous 160MHz)    
+    --vht-seg0-ch <channel> Channel index of VHT center frequency for primary 
+                            segment. Use with '--vht-ch-width'
+    --vht-seg1-ch <channel> Channel index of VHT center frequency for secondary
+                            (second 80MHz) segment. Use with '--vht-ch-width 3'
 
   Instance managing:
     --daemon                Run in background
@@ -374,15 +415,7 @@ Options:
     --stop <id>             Stop a running instance
         For <id> you can use PID or subnet interface name.
         You can get them with '--list-running'
-```
 
-</details>
-
-## Notice
-
-<details>
-
-```
     Notice 1:   This script assume your host's default policy won't forward
                 packets, so the script won't explictly ban forwarding in any
                 mode. In some unexpected case (eg. mistaken configurations) may
@@ -403,28 +436,35 @@ On exit of a linux-router instance, script **will do cleanup**, i.e. undo most c
 5. The wifi device which is used to create hotspot is `rfkill unblock`ed
 6. WiFi country code, if user assigns
 
-## Install
+## Meet contributor(s) and become one of them
 
-1-file-script. Download and run (meet the dependencies).
+Visit [**my homepage** 🏡](https://garywill.github.io) to see **more tools and projects** 🛠️.
 
-I'm currently not packaging for any distro. If you do, open a PR and add the link (can be with a version badge) to list here:
+> [❤️ Buy me a coffee](https://github.com/garywill/receiving/blob/master/receiving_methods.md) , this project took me lots of time! ([❤️ 扫码领红包并打赏一个!](https://github.com/garywill/receiving/blob/master/receiving_methods.md))
+> 
+> 🥂 ( ^\_^) o自自o (^_^ ) 🍻
 
-| Linux distro |                                                                                                            |
+🤝 Bisides, thank [create_ap](https://github.com/oblique/create_ap) by [oblique](https://github.com/oblique). This script was forked from create\_ap. Now they are quite different. (See `history` branch for how I modified create_ap). 🤝 Also thank those who contributed to that project.
-| ------------ | ---------------------------------------------------------------------------------------------------------- |
-| Any          | download [1-file-script](https://raw.githubusercontent.com/garywill/linux-router/master/lnxrouter) and run |
 
-## Dependencies
+👨‍💻 You can be contributor, too! 
 
-- bash
+- 🍃 There're some TO-DOs listed, in both [readme TODO](#todo) and [in the code file](https://github.com/garywill/linux-router/search?q=TODO&type=code)
-- procps or procps-ng
+- 🍃 Also some [unfulfilled enhancements in the Issues](https://github.com/garywill/linux-router/issues?q=is%3Aissue+is%3Aopen+label%3Aenhancement)
-- iproute2
+- 🙋‍♂️ Contributions are not limited to coding. There're [some posts and questions](https://github.com/garywill/linux-router/issues) that need more people to answer
-- dnsmasq
+
-- iptables (or nftables with `iptables-nft` translation linked)
+## Notice
-- WiFi hotspot dependencies
+
-  - hostapd
+<details>
-  - iw
+
-  - iwconfig (you only need this if 'iw' can not recognize your adapter)
+```
-  - haveged (optional)
+    Notice 1:   This script assume your host's default policy won't forward
+                packets, so the script won't explictly ban forwarding in any
+                mode. In some unexpected case (eg. mistaken configurations) may
+                cause unwanted packets leakage between 2 networks, which you
+                should be aware of if you want isolated network
+```
+
+</details>
 
 ## TODO
 
@@ -496,14 +536,4 @@ OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
 </details>
 
-## Meet developer(s) and become one of them
 
-Visit [**my homepage** 🏡](https://garywill.github.io) to see **more tools and projects** 🛠️.
-
-> [❤️ Buy me a coffee](https://github.com/garywill/receiving/blob/master/receiving_methods.md) , this project took me lots of time! ([❤️ 扫码领红包并打赏一个!](https://github.com/garywill/receiving/blob/master/receiving_methods.md))
-> 
-> 🥂 ( ^\_^) o自自o (^_^ ) 🍻
-
-🤝 Bisides, thank [create_ap](https://github.com/oblique/create_ap) by [oblique](https://github.com/oblique). This script was forked from create\_ap. Now they are quite different. (See `history` branch for how I modified create_ap). 🤝 Also thank those who contributed to that project.
-
-👨‍💻 You can be contributor, too! 🍃 There're some TO-DOs listed, at both [above](#todo) and [in the code file](https://github.com/garywill/linux-router/search?q=TODO&type=code). 🍃 Also some [unfulfilled enhancements in the Issues](https://github.com/garywill/linux-router/issues?q=is%3Aissue+is%3Aopen+label%3Aenhancement). Your name can be here!

lnxrouter

@@ -1,6 +1,6 @@
 #!/bin/bash
 
-VERSION=0.6.7
+VERSION=0.7.1
 PROGNAME="$(basename $0)"
 
 export LC_ALL=C
@@ -88,7 +88,7 @@ Options:
                             Using this you can't use same wlan interface
                             for both Internet and AP
     --virt-name <name>      Set name of virtual interface
-    -c <channel>            Channel number (default: 1)
+    -c <channel>            Specify channel (default: use current, or 1 / 36)
     --country <code>        Set two-letter country code for regularity
                             (example: US)
     --freq-band <GHz>       Set frequency band: 2.4 or 5 (default: 2.4)
@@ -102,13 +102,28 @@ Options:
                             (defaults to /etc/hostapd/hostapd.accept)
     --hostapd-debug <level> 1 or 2. Passes -d or -dd to hostapd
     --isolate-clients       Disable wifi communication between clients
-    
-    --ieee80211n            Enable IEEE 802.11n (HT)
-    --ieee80211ac           Enable IEEE 802.11ac (VHT)
-    --ht_capab <HT>         HT capabilities (default: [HT40+])
-    --vht_capab <VHT>       VHT capabilities
-    
     --no-haveged            Do not run haveged automatically when needed
+    --hs20                  Enable Hotspot 2.0
+
+    WiFi 4 (802.11n) configs:
+    --wifi4                 Enable IEEE 802.11n (HT)
+    --req-ht                Require station HT (High Throughput) mode
+    --ht-capab <HT caps>    HT capabilities (default: [HT40+])
+
+    WiFi 5 (802.11ac) configs:
+    --wifi5                 Enable IEEE 802.11ac (VHT)
+    --req-vht               Require station VHT (Very High Thoughtput) mode
+    --vht-capab <VHT caps>  VHT capabilities
+    
+    --vht-ch-width <index>  Index of VHT channel width:
+                                0 for 20MHz or 40MHz (default)
+                                1 for 80MHz
+                                2 for 160MHz
+                                3 for 80+80MHz (Non-contigous 160MHz)    
+    --vht-seg0-ch <channel> Channel index of VHT center frequency for primary 
+                            segment. Use with '--vht-ch-width'
+    --vht-seg1-ch <channel> Channel index of VHT center frequency for secondary
+                            (second 80MHz) segment. Use with '--vht-ch-width 3'
 
   Instance managing:
     --daemon                Run in background
@@ -179,13 +194,19 @@ define_global_variables(){
     HIDDEN=0 # hidden wifi hotspot
     WIFI_IFACE=
     CHANNEL=default 
+    HOTSPOT20=0 # For enabling Hotspot 2.0
     WPA_VERSION=2
     MAC_FILTER=0
     MAC_FILTER_ACCEPT=/etc/hostapd/hostapd.accept
     IEEE80211N=0
+    REQUIREHT=0
     IEEE80211AC=0
+    REQUIREVHT=0
     HT_CAPAB='[HT40+]'
     VHT_CAPAB=
+    VHTCHANNELWIDTH=0
+    VHTSEG0CHINDEX=0
+    VHTSEG1CHINDEX=0
     DRIVER=nl80211
     NO_VIRT=0 # not use virtual interface
     COUNTRY=
@@ -373,6 +394,10 @@ parse_user_options(){
                 CHANNEL="$1"
                 shift
                 ;;
+            --hs20)
+                shift
+                HOTSPOT20=1
+                ;;
             -w)
                 shift
                 WPA_VERSION="$1"
@@ -380,24 +405,47 @@ parse_user_options(){
                 shift
                 ;;
 
-            --ieee80211n)
+            --wifi4|--ieee80211n)
                 shift
                 IEEE80211N=1
                 ;;
-            --ieee80211ac)
+            --req-ht|--require-ht)
+                shift
+                REQUIREHT=1
+                ;;
+            --wifi5|--ieee80211ac)
                 shift
                 IEEE80211AC=1
                 ;;
-            --ht_capab)
+            --req-vht|--require-vht)
+                shift
+                REQUIREVHT=1
+                ;;
+            --ht-capab)
                 shift
                 HT_CAPAB="$1"
                 shift
                 ;;
-            --vht_capab)
+            --vht-capab)
                 shift
                 VHT_CAPAB="$1"
                 shift
                 ;;
+            --vht-ch-width|--vht-channel-width)
+                shift
+                VHTCHANNELWIDTH="$1"
+                shift
+                ;;
+            --vht-seg0-ch|--vht-seg0-channel)
+                shift
+                VHTSEG0CHINDEX="$1"
+                shift
+                ;;
+            --vht-seg1-ch|--vht-seg1-channel)
+                shift
+                VHTSEG1CHINDEX="$1"
+                shift
+                ;;
             --driver)
                 shift
                 DRIVER="$1"
@@ -1506,7 +1554,7 @@ daemonizing_check(){
 check_wifi_settings() {
 
     if ! ( which iw > /dev/null 2>&1 && iw dev $WIFI_IFACE info > /dev/null 2>&1 ); then
-        echo "WARN: Can't use 'iw' to operate interfce '$WIFI_IFACE', trying 'iwconfig' (not as good as 'iw') ..." >&2
+        echo "WARN: Can't use 'iw' to operate interfce '$WIFI_IFACE', trying 'iwconfig' (not as good as 'iw') ... (Did you spell the interface name right?)" >&2
         USE_IWCONFIG=1
     fi
     
@@ -1522,14 +1570,6 @@ check_wifi_settings() {
         exit 1
     fi
 
-    if [[ $CHANNEL == default ]]; then
-        if [[ $FREQ_BAND == 2.4 ]]; then
-            CHANNEL=1
-        else
-            CHANNEL=36
-        fi
-    fi
-
     if [[ $FREQ_BAND != 5 && $CHANNEL -gt 14 ]]; then
         echo "Channel number is greater than 14, assuming 5GHz frequency band"
         FREQ_BAND=5
@@ -1648,20 +1688,21 @@ prepare_wifi_interface() {
     
     if [[ $NO_VIRT -eq 0 ]]; then
     ## Will generate virtual wifi interface
+    
+        # TODO move this to check_wifi_settings() ?
         if is_interface_wifi_connected ${WIFI_IFACE}; then
             WIFI_IFACE_FREQ=$(iw dev ${WIFI_IFACE} link | grep -i freq | awk '{print $2}')
             WIFI_IFACE_CHANNEL=$(ieee80211_frequency_to_channel ${WIFI_IFACE_FREQ})
-            echo "${WIFI_IFACE} already in channel ${WIFI_IFACE_CHANNEL} (${WIFI_IFACE_FREQ} MHz)"
+            
-            if is_5ghz_frequency $WIFI_IFACE_FREQ; then
+            echo "${WIFI_IFACE} already working in channel ${WIFI_IFACE_CHANNEL} (${WIFI_IFACE_FREQ} MHz)"
-                FREQ_BAND=5
+            
-            else
+            if [[ $CHANNEL == default ]]; then
-                FREQ_BAND=2.4
+                echo "Use wifi adapter current channel $WIFI_IFACE_CHANNEL as target channel"
-            fi
-            if [[ $WIFI_IFACE_CHANNEL -ne $CHANNEL ]]; then
-                echo "Channel fallback to ${WIFI_IFACE_CHANNEL}"
                 CHANNEL=$WIFI_IFACE_CHANNEL
-            else
+            fi
-                echo
+            
+            if [[ $WIFI_IFACE_CHANNEL -ne $CHANNEL ]]; then
+                echo "WARN: Wifi adapter already working in channel ${WIFI_IFACE_CHANNEL}, which is different than target channel $CHANNEL" >&2
             fi
         fi
 
@@ -1687,6 +1728,15 @@ prepare_wifi_interface() {
     else # no virtual wifi interface, use wifi device interface itself
         AP_IFACE=${WIFI_IFACE}
     fi
+    
+    if [[ $CHANNEL == default ]]; then
+        echo "Channel not specified, use default"
+        if [[ $FREQ_BAND == 2.4 ]]; then
+            CHANNEL=1
+        else
+            CHANNEL=36
+        fi
+    fi
 }
 
 decide_subnet_interface() {
@@ -1748,6 +1798,10 @@ write_hostapd_conf() {
 		EOF
     fi
 
+    if [[ $HOTSPOT20 -eq 1 ]]; then
+        echo "hs20=1" >> "$CONFDIR/hostapd.conf"
+    fi
+
     if [[ $IEEE80211N -eq 1 ]]; then
         cat <<- EOF >> "$CONFDIR/hostapd.conf"
 			ieee80211n=1
@@ -1755,14 +1809,40 @@ write_hostapd_conf() {
 		EOF
     fi
 
+    if [[ $REQUIREHT -eq 1 ]]; then
+        echo "require_ht=1" >> "$CONFDIR/hostapd.conf"
+    fi
+
     if [[ $IEEE80211AC -eq 1 ]]; then
         echo "ieee80211ac=1" >> "$CONFDIR/hostapd.conf"
     fi
 
+    if [[ $REQUIREVHT -eq 1 ]]; then
+        echo "require_vht=1" >> "$CONFDIR/hostapd.conf"
+    fi
+
     if [[ -n "$VHT_CAPAB" ]]; then
         echo "vht_capab=${VHT_CAPAB}" >> "$CONFDIR/hostapd.conf"
     fi
 
+	if [[ $VHTCHANNELWIDTH -gt 0 ]]; then
+		cat <<- EOF >> "$CONFDIR/hostapd.conf"
+			vht_oper_chwidth=${VHTCHANNELWIDTH}
+		EOF
+	fi
+
+	if [[ $VHTSEG0CHINDEX -gt 0 ]]; then
+		cat <<- EOF >> "$CONFDIR/hostapd.conf"
+			vht_oper_centr_freq_seg0_idx=${VHTSEG0CHINDEX}
+		EOF
+	fi
+
+	if [[ $VHTSEG1CHINDEX -gt 0 ]]; then
+		cat <<- EOF >> "$CONFDIR/hostapd.conf"
+			vht_oper_centr_freq_seg1_idx=${VHTSEG1CHINDEX}
+		EOF
+	fi
+
     if [[ $IEEE80211N -eq 1 ]] || [[ $IEEE80211AC -eq 1 ]]; then
         echo "wmm_enabled=1" >> "$CONFDIR/hostapd.conf"
     fi
@@ -1910,7 +1990,7 @@ run_wifi_ap_processes() {
     #    sleep 1
     #done
     #echo -n "hostapd PID: " ; cat $CONFDIR/hostapd.pid
-    pid_watchdog $HOSTAPD_PID 10 "hostapd failed" &
+    pid_watchdog $HOSTAPD_PID 10 "hostapd failed. (tip: try '--hostapd-debug' to get some debug info)" &
     sleep 3
 }