parseV6: only walk real ipv6 extension headers, fail closed on unknown protocols (#1840)

CHANGELOG.md

@@ -7,6 +7,20 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
 
 ## [Unreleased]
 
+### Changed
+
+- IPv6 packets whose next header is a protocol Nebula does not parse (SCTP, GRE, IP-in-IP, etc.) are now
+  classified as that protocol with no ports, closing a firewall bypass where a crafted payload could steer
+  the classifier into reading one as TCP/UDP and matching a TCP/UDP rule. These packets are now matched as
+  their true protocol, so only a `proto: any` rule allows them. If you carry one of these protocols over the
+  overlay, confirm a `proto: any` rule covers it before upgrading, it may have been passing only through this
+  bypass. (#1840)
+
+### Fixed
+
+- The ICMPv6 type was read from the wrong byte when classifying IPv6 packets, so the echo identifier used
+  for conntrack was never picked up. (#1840)
+
 ## [1.11.0] - 2026-07-23
 
 See the [v1.11.0](https://github.com/slackhq/nebula/milestone/25?closed=1) milestone for a complete list of changes.

iputil/packet.go

@@ -2,11 +2,16 @@ package iputil
 
 import (
 	"encoding/binary"
+	"errors"
 
 	"golang.org/x/net/ipv4"
 	"golang.org/x/net/ipv6"
 )
 
+// ErrIPv6CouldNotFindPayload is returned when the ipv6 extension header chain is truncated before a terminal
+// upper layer protocol is reached.
+var ErrIPv6CouldNotFindPayload = errors.New("could not find payload in ipv6 packet")
+
 const (
 	// MaxIPv4RejectPacketSize is the largest IPv4 reject packet:
 	// - 20 byte ipv4 header
@@ -199,8 +204,8 @@ func ipv4CreateRejectTCPPacket(packet []byte, out []byte) []byte {
 }
 
 func ipv6CreateRejectPacket(packet []byte, out []byte) []byte {
-	proto, offset, isFragment := ipv6FindUpperProtocol(packet)
+	proto, offset, isFragment, err := IPv6FindUpperProtocol(packet)
-	if isFragment {
+	if err != nil || isFragment {
 		return nil
 	}
 	switch proto {
@@ -333,7 +338,18 @@ func ipv6CreateRejectTCPPacket(packet []byte, out []byte, offset int) []byte {
 	return out
 }
 
-func ipv6FindUpperProtocol(packet []byte) (nextHeader uint8, offset int, isFragment bool) {
+// IPv6FindUpperProtocol walks the ipv6 extension header chain and returns the upper layer protocol, the
+// offset it begins at, and whether the packet is a non-first fragment. Only the RFC 8200 and IANA extension
+// headers below are walked. Everything else, including Mobility (135), HIP (139), Shim6 (140), experimental
+// 253/254, and real upper layer protocols like SCTP or GRE, is terminal. Walking those as extension headers
+// is a firewall bypass, so they fail closed. For a non-first fragment the returned protocol is the fragmented
+// protocol and offset points at the fragment header, there is no transport header to locate. Returns
+// ErrIPv6CouldNotFindPayload if packet is smaller than an ipv6 header or the chain is truncated before a
+// terminal protocol is reached.
+func IPv6FindUpperProtocol(packet []byte) (nextHeader uint8, offset int, isFragment bool, err error) {
+	if len(packet) < ipv6.HeaderLen {
+		return 0, 0, false, ErrIPv6CouldNotFindPayload
+	}
 	nextHeader = packet[6]
 	offset = ipv6.HeaderLen
 
@@ -341,30 +357,36 @@ func ipv6FindUpperProtocol(packet []byte) (nextHeader uint8, offset int, isFragm
 		switch nextHeader {
 		case 0, 43, 60: // Hop-by-Hop, Routing, Destination
 			if len(packet) < offset+2 {
-				return nextHeader, offset, isFragment
+				return nextHeader, offset, isFragment, ErrIPv6CouldNotFindPayload
 			}
 			nextHeader = packet[offset]
 			offset += (int(packet[offset+1]) + 1) << 3
 
 		case 44: // Fragment
 			if len(packet) < offset+8 {
-				return nextHeader, offset, isFragment
+				return nextHeader, offset, isFragment, ErrIPv6CouldNotFindPayload
 			}
+			// Non-first fragments carry no transport header, report the fragmented protocol and stop
 			if packet[offset+2] != 0 || packet[offset+3]&0xf8 != 0 {
-				isFragment = true
+				return packet[offset], offset, true, nil
 			}
 			nextHeader = packet[offset]
 			offset += 8
 
 		case 51: // AH
 			if len(packet) < offset+2 {
-				return nextHeader, offset, isFragment
+				return nextHeader, offset, isFragment, ErrIPv6CouldNotFindPayload
 			}
 			nextHeader = packet[offset]
 			offset += (int(packet[offset+1]) + 2) << 2
 
 		default:
-			return nextHeader, offset, isFragment
+			// A prior extension header can declare a length that advances offset past the packet. The terminal
+			// protocol's header isn't actually here, so treat the chain as truncated rather than classifying it.
+			if offset > len(packet) {
+				return nextHeader, offset, isFragment, ErrIPv6CouldNotFindPayload
+			}
+			return nextHeader, offset, isFragment, nil
 		}
 	}
 }

iputil/packet_test.go

@@ -6,6 +6,7 @@ import (
 	"testing"
 
 	"github.com/stretchr/testify/assert"
+	"github.com/stretchr/testify/require"
 	"golang.org/x/net/ipv4"
 	"golang.org/x/net/ipv6"
 )
@@ -474,3 +475,61 @@ func TestCreateICMPEchoResponse_IPv6_NotICMPv6(t *testing.T) {
 	result := CreateICMPEchoResponse(packet, out)
 	assert.Nil(t, result)
 }
+
+func Test_IPv6FindUpperProtocol(t *testing.T) {
+	src := net.ParseIP("fd00::1")
+	dst := net.ParseIP("fd00::2")
+
+	// 8 byte extension/transport stand-ins, first byte is the next header, second is the length field
+	extToTCP := []byte{6, 0, 0, 0, 0, 0, 0, 0}        // len 0 -> 8 bytes, next = TCP
+	extToUDP := []byte{17, 0, 0, 0, 0, 0, 0, 0}       // len 0 -> 8 bytes, next = UDP
+	extToRouting := []byte{43, 0, 0, 0, 0, 0, 0, 0}   // len 0 -> 8 bytes, next = Routing
+	ahToUDP := []byte{17, 0, 0, 0, 0, 0, 0, 0}        // AH len 0 -> (0+2)<<2 = 8 bytes, next = UDP
+	firstFragToUDP := []byte{17, 0, 0, 1, 0, 0, 0, 1} // frag offset 0, M=1, next = UDP
+	nonFirstFrag := []byte{17, 0, 0, 9, 0, 0, 0, 1}   // frag offset non-zero, next = UDP
+	transport := []byte{0, 80, 1, 187, 0, 0, 0, 0}    // stand-in bytes, IPv6FindUpperProtocol never reads ports
+
+	tests := []struct {
+		name         string
+		nextHeader   uint8
+		payload      []byte
+		wantProto    uint8
+		wantOffset   int
+		wantFragment bool
+		wantErr      error
+	}{
+		{"plain udp", 17, transport, 17, ipv6.HeaderLen, false, nil},
+		{"hop-by-hop then tcp", 0, append(extToTCP, transport...), 6, ipv6.HeaderLen + 8, false, nil},
+		{"routing then tcp", 43, append(extToTCP, transport...), 6, ipv6.HeaderLen + 8, false, nil},
+		{"destination then udp", 60, append(extToUDP, transport...), 17, ipv6.HeaderLen + 8, false, nil},
+		{"hop-by-hop, routing, then tcp", 0, append(append(extToRouting, extToTCP...), transport...), 6, ipv6.HeaderLen + 16, false, nil},
+		{"ah then udp", 51, append(ahToUDP, transport...), 17, ipv6.HeaderLen + 8, false, nil},
+		{"first fragment walks to transport", 44, append(firstFragToUDP, transport...), 17, ipv6.HeaderLen + 8, false, nil},
+		{"non-first fragment stops", 44, append(nonFirstFrag, transport...), 17, ipv6.HeaderLen, true, nil},
+		{"unknown protocol is terminal", 132, transport, 132, ipv6.HeaderLen, false, nil}, // SCTP
+		{"truncated extension header", 0, nil, 0, ipv6.HeaderLen, false, ErrIPv6CouldNotFindPayload},
+		// Destination Options with a declared length (255+1)*8 = 2048 that runs past the 48 byte buffer, next = SCTP
+		{"extension length past buffer", 60, []byte{132, 255, 0, 0, 0, 0, 0, 0}, 132, ipv6.HeaderLen + 2048, false, ErrIPv6CouldNotFindPayload},
+	}
+
+	for _, tt := range tests {
+		t.Run(tt.name, func(t *testing.T) {
+			packet := makeIPv6Packet(src, dst, tt.nextHeader, tt.payload)
+			proto, offset, isFragment, err := IPv6FindUpperProtocol(packet)
+			if tt.wantErr != nil {
+				assert.ErrorIs(t, err, tt.wantErr)
+				return
+			}
+			require.NoError(t, err)
+			assert.Equal(t, tt.wantProto, proto)
+			assert.Equal(t, tt.wantOffset, offset)
+			assert.Equal(t, tt.wantFragment, isFragment)
+		})
+	}
+
+	// A packet smaller than an ipv6 header must error rather than panic reading byte 6
+	t.Run("shorter than ipv6 header", func(t *testing.T) {
+		_, _, _, err := IPv6FindUpperProtocol(make([]byte, 6))
+		assert.ErrorIs(t, err, ErrIPv6CouldNotFindPayload)
+	})
+}

outside.go

@@ -13,6 +13,7 @@ import (
 
 	"github.com/slackhq/nebula/firewall"
 	"github.com/slackhq/nebula/header"
+	"github.com/slackhq/nebula/iputil"
 	"golang.org/x/net/ipv4"
 )
 
@@ -299,7 +300,6 @@ var (
 	ErrIPv4InvalidHeaderLength = errors.New("invalid ipv4 header length")
 	ErrIPv4PacketTooShort      = errors.New("ipv4 packet is too short")
 	ErrIPv6PacketTooShort      = errors.New("ipv6 packet is too short")
-	ErrIPv6CouldNotFindPayload = errors.New("could not find payload in ipv6 packet")
 )
 
 // newPacket validates and parses the interesting bits for the firewall out of the ip and sub protocol headers
@@ -332,101 +332,59 @@ func parseV6(data []byte, incoming bool, fp *firewall.Packet) error {
 		fp.RemoteAddr, _ = netip.AddrFromSlice(data[24:40])
 	}
 
-	protoAt := 6             // NextHeader is at 6 bytes into the ipv6 header
+	// Walk the extension header chain to the upper layer protocol. iputil.IPv6FindUpperProtocol is the single
-	offset := ipv6.HeaderLen // Start at the end of the ipv6 header
+	// source of truth for which headers are extension headers, so this stays in lockstep with the reject path
-	next := 0
+	// and cannot drift into misreading an unknown protocol (SCTP, GRE, etc.) as a forged transport.
-	for {
+	proto, offset, isFragment, err := iputil.IPv6FindUpperProtocol(data)
-		if protoAt >= dataLen {
+	if err != nil {
-			break
+		return ErrIPv6PacketTooShort
+	}
+
+	fp.Protocol = proto
+	fp.Fragment = isFragment
+	if isFragment {
+		// Non-first fragments carry no transport header, so we have no ports to read
+		fp.RemotePort = 0
+		fp.LocalPort = 0
+		return nil
+	}
+
+	switch layers.IPProtocol(proto) {
+	case layers.IPProtocolICMPv6:
+		// An ICMPv6 message is at least type, code and checksum, 4 bytes. Only echo carries more than we read.
+		if dataLen < offset+4 {
+			return ErrIPv6PacketTooShort
 		}
-		proto := layers.IPProtocol(data[protoAt])
+		fp.LocalPort = 0      //incoming vs outgoing doesn't matter for icmpv6
-
+		switch data[offset] { //icmp type
-		switch proto {
+		case layers.ICMPv6TypeEchoRequest, layers.ICMPv6TypeEchoReply:
-		case layers.IPProtocolESP, layers.IPProtocolNoNextHeader:
-			fp.Protocol = uint8(proto)
-			fp.RemotePort = 0
-			fp.LocalPort = 0
-			fp.Fragment = false
-			return nil
-
-		case layers.IPProtocolICMPv6:
 			if dataLen < offset+6 {
 				return ErrIPv6PacketTooShort
 			}
-			fp.Protocol = uint8(proto)
+			fp.RemotePort = binary.BigEndian.Uint16(data[offset+4 : offset+6]) //identifier
-			fp.LocalPort = 0 //incoming vs outgoing doesn't matter for icmpv6
-			icmptype := data[offset+1]
-			switch icmptype {
-			case layers.ICMPv6TypeEchoRequest, layers.ICMPv6TypeEchoReply:
-				fp.RemotePort = binary.BigEndian.Uint16(data[offset+4 : offset+6]) //identifier
-			default:
-				fp.RemotePort = 0
-			}
-			fp.Fragment = false
-			return nil
-
-		case layers.IPProtocolTCP, layers.IPProtocolUDP:
-			if dataLen < offset+4 {
-				return ErrIPv6PacketTooShort
-			}
-
-			fp.Protocol = uint8(proto)
-			if incoming {
-				fp.RemotePort = binary.BigEndian.Uint16(data[offset : offset+2])
-				fp.LocalPort = binary.BigEndian.Uint16(data[offset+2 : offset+4])
-			} else {
-				fp.LocalPort = binary.BigEndian.Uint16(data[offset : offset+2])
-				fp.RemotePort = binary.BigEndian.Uint16(data[offset+2 : offset+4])
-			}
-
-			fp.Fragment = false
-			return nil
-
-		case layers.IPProtocolIPv6Fragment:
-			// Fragment header is 8 bytes, need at least offset+4 to read the offset field
-			if dataLen < offset+8 {
-				return ErrIPv6PacketTooShort
-			}
-
-			// Check if this is the first fragment
-			fragmentOffset := binary.BigEndian.Uint16(data[offset+2:offset+4]) &^ uint16(0x7) // Remove the reserved and M flag bits
-			if fragmentOffset != 0 {
-				// Non-first fragment, use what we have now and stop processing
-				fp.Protocol = data[offset]
-				fp.Fragment = true
-				fp.RemotePort = 0
-				fp.LocalPort = 0
-				return nil
-			}
-
-			// The next loop should be the transport layer since we are the first fragment
-			next = 8 // Fragment headers are always 8 bytes
-
-		case layers.IPProtocolAH:
-			// Auth headers, used by IPSec, have a different meaning for header length
-			if dataLen <= offset+1 {
-				break
-			}
-			next = (int(data[offset+1]) + 2) << 2
-
 		default:
-			// Normal ipv6 header length processing
+			fp.RemotePort = 0
-			if dataLen <= offset+1 {
-				break
-			}
-			next = (int(data[offset+1]) + 1) << 3
 		}
 
-		if next <= 0 {
+	case layers.IPProtocolTCP, layers.IPProtocolUDP:
-			// Safety check, each ipv6 header has to be at least 8 bytes
+		if dataLen < offset+4 {
-			next = 8
+			return ErrIPv6PacketTooShort
+		}
+		if incoming {
+			fp.RemotePort = binary.BigEndian.Uint16(data[offset : offset+2])
+			fp.LocalPort = binary.BigEndian.Uint16(data[offset+2 : offset+4])
+		} else {
+			fp.LocalPort = binary.BigEndian.Uint16(data[offset : offset+2])
+			fp.RemotePort = binary.BigEndian.Uint16(data[offset+2 : offset+4])
 		}
 
-		protoAt = offset
+	default:
-		offset = offset + next
+		// don't set ports for protocols Nebula doesn't inspect
+		fp.RemotePort = 0
+		fp.LocalPort = 0
 	}
 
-	return ErrIPv6CouldNotFindPayload
+	return nil
 }
 
 func parseV4(data []byte, incoming bool, fp *firewall.Packet) error {

outside_test.go

@@ -14,6 +14,7 @@ import (
 	"github.com/stretchr/testify/assert"
 	"github.com/stretchr/testify/require"
 	"golang.org/x/net/ipv4"
+	"golang.org/x/net/ipv6"
 )
 
 func Test_newPacket(t *testing.T) {
@@ -115,12 +116,12 @@ func Test_newPacket_v6(t *testing.T) {
 	require.NoError(t, err)
 
 	err = newPacket(buffer.Bytes(), true, p)
-	require.ErrorIs(t, err, ErrIPv6CouldNotFindPayload)
+	require.ErrorIs(t, err, ErrIPv6PacketTooShort)
 
 	// A v6 packet with a hop-by-hop extension
 	// ICMPv6 Payload (Echo Request)
 	icmpLayer := layers.ICMPv6{
-		TypeCode: layers.ICMPv6TypeEchoRequest,
+		TypeCode: layers.CreateICMPv6TypeCode(layers.ICMPv6TypeEchoRequest, 0),
 	}
 	// Hop-by-Hop Extension Header
 	hopOption := layers.IPv6HopByHopOption{}
@@ -149,12 +150,12 @@ func Test_newPacket_v6(t *testing.T) {
 	// A full IPv6 header and 1 byte in the first extension, but missing
 	// the length byte.
 	err = newPacket(buffer.Bytes()[:41], true, p)
-	require.ErrorIs(t, err, ErrIPv6CouldNotFindPayload)
+	require.ErrorIs(t, err, ErrIPv6PacketTooShort)
 
 	// A full IPv6 header plus 1 full extension, but only 1 byte of the
 	// next layer, missing length byte
 	err = newPacket(buffer.Bytes()[:49], true, p)
-	require.ErrorIs(t, err, ErrIPv6CouldNotFindPayload)
+	require.ErrorIs(t, err, ErrIPv6PacketTooShort)
 	err = nil
 
 	// A good ICMP packet
@@ -167,7 +168,7 @@ func Test_newPacket_v6(t *testing.T) {
 	}
 
 	icmp := layers.ICMPv6{
-		TypeCode: layers.ICMPv6TypeEchoRequest,
+		TypeCode: layers.CreateICMPv6TypeCode(layers.ICMPv6TypeEchoRequest, 0),
 		Checksum: 0x1234,
 	}
 
@@ -189,6 +190,18 @@ func Test_newPacket_v6(t *testing.T) {
 	assert.Equal(t, uint16(0), p.LocalPort)
 	assert.False(t, p.Fragment)
 
+	// A minimal 4 byte non-echo ICMPv6 message (type, code, checksum), no identifier to read
+	icmpMin := make([]byte, ipv6.HeaderLen+4)
+	copy(icmpMin, buffer.Bytes()[:ipv6.HeaderLen])
+	icmpMin[6] = byte(layers.IPProtocolICMPv6)
+	icmpMin[ipv6.HeaderLen] = 1 // type 1, destination unreachable, not echo
+	err = newPacket(icmpMin, true, p)
+	require.NoError(t, err)
+	assert.Equal(t, uint8(layers.IPProtocolICMPv6), p.Protocol)
+	assert.Equal(t, uint16(0), p.RemotePort)
+	assert.Equal(t, uint16(0), p.LocalPort)
+	assert.False(t, p.Fragment)
+
 	// A good ESP packet
 	b := buffer.Bytes()
 	b[6] = byte(layers.IPProtocolESP)
@@ -213,11 +226,15 @@ func Test_newPacket_v6(t *testing.T) {
 	assert.Equal(t, uint16(0), p.LocalPort)
 	assert.False(t, p.Fragment)
 
-	// An unknown protocol packet
+	// An unknown protocol packet, we don't dissect it so we fail closed on its true protocol with no ports
 	b = buffer.Bytes()
 	b[6] = 255 // 255 is a reserved protocol number
 	err = newPacket(b, true, p)
-	require.ErrorIs(t, err, ErrIPv6CouldNotFindPayload)
+	require.NoError(t, err)
+	assert.Equal(t, uint8(255), p.Protocol)
+	assert.Equal(t, uint16(0), p.RemotePort)
+	assert.Equal(t, uint16(0), p.LocalPort)
+	assert.False(t, p.Fragment)
 
 	// A good UDP packet
 	ip = layers.IPv6{
@@ -334,14 +351,14 @@ func Test_newPacket_v6(t *testing.T) {
 	assert.Equal(t, uint16(22), p.LocalPort)
 	assert.False(t, p.Fragment)
 
-	// Ensure buffer bounds checking during processing
+	// Ensure buffer bounds checking during processing, a truncated AH header can't reach the payload
 	err = newPacket(b[:41], true, p)
 	require.ErrorIs(t, err, ErrIPv6PacketTooShort)
 
 	// Invalid AH header
 	b = buffer.Bytes()
 	err = newPacket(b, true, p)
-	require.ErrorIs(t, err, ErrIPv6CouldNotFindPayload)
+	require.ErrorIs(t, err, ErrIPv6PacketTooShort)
 }
 
 func Test_newPacket_ipv6Fragment(t *testing.T) {
@@ -675,3 +692,66 @@ func Test_newPacket_v6ExtHeaderOverflow(t *testing.T) {
 	// the host delivers to, not the forged 443 at the overflowed offset.
 	assert.Equal(t, uint16(22), p.LocalPort, "firewall must parse the real transport header, not the overflowed offset")
 }
+
+// Test_newPacket_v6ExtHeaderPastBuffer is a regression test for an extension header whose declared length
+// advances the walk past the end of the packet. The upper layer protocol's header isn't actually present,
+// so parseV6 must drop the packet rather than classify it as the terminal protocol with no ports.
+func Test_newPacket_v6ExtHeaderPastBuffer(t *testing.T) {
+	p := &firewall.Packet{}
+
+	pkt := make([]byte, 48)
+	pkt[0] = 0x60
+	pkt[6] = byte(layers.IPProtocolIPv6Destination) // Destination Options
+	pkt[7] = 64                                     // hop limit
+	pkt[40] = byte(layers.IPProtocolSCTP)           // Dest Options next header = SCTP
+	pkt[41] = 255                                   // declared length (255+1)*8 = 2048, past the 48 byte buffer
+
+	require.ErrorIs(t, newPacket(pkt, true, p), ErrIPv6PacketTooShort)
+}
+
+// Test_newPacket_v6ExtHeaderConfusion is a regression test for parseV6 walking any unrecognized
+// Next Header as if it were an ipv6 extension header. A real upper layer protocol Nebula doesn't
+// dissect (SCTP here) is not walkable, so applying the (len+1)*8 formula marched into the SCTP
+// payload and landed on a byte that looked like UDP, forging a protocol/port pair the firewall
+// would trust while the host delivered the real SCTP datagram. The fix fails closed: the packet
+// is classified as its true protocol with no ports, so it only matches an `any` rule.
+func Test_newPacket_v6ExtHeaderConfusion(t *testing.T) {
+	p := &firewall.Packet{}
+
+	pkt := make([]byte, 52)
+	pkt[0] = 0x60                        // version 6
+	pkt[6] = byte(layers.IPProtocolSCTP) // NextHeader = SCTP, a real protocol, not an extension header
+	pkt[7] = 64                          // hop limit
+
+	// Real SCTP header at offset 40. Pre-fix parseV6 walked SCTP as an extension header: byte 41 (0x00, the
+	// low byte of the src port below) was read as the header length, giving next=(0+1)*8=8, which landed the
+	// walk on byte 40 (0x11), misread as NextHeader=UDP, then bytes 48-51 as ports.
+	binary.BigEndian.PutUint16(pkt[40:42], 0x1100) // SCTP src port; byte 40=0x11, byte 41=0x00
+	binary.BigEndian.PutUint16(pkt[42:44], 445)    // SCTP dst port, never read by parseV6
+	binary.BigEndian.PutUint16(pkt[48:50], 53)     // SCTP checksum bytes, pre-fix forged RemotePort
+	binary.BigEndian.PutUint16(pkt[50:52], 53)     // pre-fix forged LocalPort
+
+	require.NoError(t, newPacket(pkt, true, p))
+	assert.Equal(t, uint8(layers.IPProtocolSCTP), p.Protocol, "must classify as the true protocol, not the forged UDP")
+	assert.Equal(t, uint16(0), p.RemotePort)
+	assert.Equal(t, uint16(0), p.LocalPort)
+	assert.False(t, p.Fragment)
+
+	// Same confusion, but the unknown protocol sits after a real extension header. The HopByHop is walked
+	// correctly, then SCTP must still fail closed instead of being walked into its own payload. Protocol is
+	// the only assertion that discriminates the fix here, a regression that walked SCTP would misclassify it.
+	chained := make([]byte, 60)
+	chained[0] = 0x60                                  // version 6
+	chained[6] = byte(layers.IPProtocolIPv6HopByHop)   // NextHeader = HopByHop extension
+	chained[7] = 64                                    // hop limit
+	chained[40] = byte(layers.IPProtocolSCTP)          // HopByHop NextHeader = SCTP
+	chained[41] = 0                                    // HopByHop length 0 -> 8 bytes, SCTP begins at offset 48
+	binary.BigEndian.PutUint16(chained[48:50], 0x1100) // SCTP src port, pre-fix forged NextHeader/length bait
+	binary.BigEndian.PutUint16(chained[50:52], 445)    // SCTP dst port, never read by parseV6
+
+	require.NoError(t, newPacket(chained, true, p))
+	assert.Equal(t, uint8(layers.IPProtocolSCTP), p.Protocol, "must fail closed on the unknown protocol after the extension header")
+	assert.Equal(t, uint16(0), p.RemotePort)
+	assert.Equal(t, uint16(0), p.LocalPort)
+	assert.False(t, p.Fragment)
+}