* firewall: add option to send REJECT replies
This change allows you to configure the firewall to send REJECT packets
when a packet is denied.
firewall:
# Action to take when a packet is not allowed by the firewall rules.
# Can be one of:
# `drop` (default): silently drop the packet.
# `reject`: send a reject reply.
# - For TCP, this will be a RST "Connection Reset" packet.
# - For other protocols, this will be an ICMP port unreachable packet.
outbound_action: drop
inbound_action: drop
These packets are only sent to established tunnels, and only on the
overlay network (currently IPv4 only).
$ ping -c1 192.168.100.3
PING 192.168.100.3 (192.168.100.3) 56(84) bytes of data.
From 192.168.100.3 icmp_seq=2 Destination Port Unreachable
--- 192.168.100.3 ping statistics ---
2 packets transmitted, 0 received, +1 errors, 100% packet loss, time 31ms
$ nc -nzv 192.168.100.3 22
(UNKNOWN) [192.168.100.3] 22 (?) : Connection refused
This change also modifies the smoke test to capture tcpdump pcaps from
both the inside and outside to inspect what is going on over the wire.
It also now does TCP and UDP packet tests using the Nmap version of
ncat.
* calculate seq and ack the same was as the kernel
The logic a bit confusing, so we copy it straight from how the kernel
does iptables `--reject-with tcp-reset`:
- https://github.com/torvalds/linux/blob/v5.19/net/ipv4/netfilter/nf_reject_ipv4.c#L193-L221
* cleanup
This makes it easier to use the docker container smoke test that
GitHub actions runs. There is also `make smoke-docker-race` that runs the
smoke test with `-race` enabled.
This change adds a new Github Action, a 3 node smoke test. It starts
three docker containers (one lighthouse and two standard nodes) and
tests that they can all ping each other. This should hopefully detect
any basic runtime failures in PRs.
