Compare commits

...

17 Commits

Author SHA1 Message Date
Jay Wren 7794e93762 Address PR feedback: remove outbound rate limit, improve config docs
Remove rate limiting from StartHandshake (outbound) since DoS
protection only needs to limit inbound handshakes. This also avoids
returning nil from StartHandshake which historically always returned
non-nil. Update config comment to note openssl speed is single-core
and suggest scaling by routines.

Co-Authored-By: Claude <svc-devxp-claude@slack-corp.com>
2026-04-10 14:36:32 -04:00
Jay Wren 3df60ae195 Add handshakes.max_rate to limit new handshakes per second
Nebula is vulnerable to DoS via handshake flooding since each incoming
  handshake performs expensive DH operations. This adds a token bucket
  rate limiter to the handshake manager that caps both inbound and
  outbound new handshakes per second. When the limit is reached, new
  handshakes are silently dropped and counted via the
  handshake_manager.rate_limited metric.

  Configured via handshakes.max_rate (default 0 = unlimited).

  Co-Authored-By: Claude <svc-devxp-claude@slack-corp.com>
2026-03-30 15:45:38 -04:00
Jack Doan 91d1f4675a properly handle closetunnel packets (#1638) 2026-03-25 11:59:37 -05:00
John Maguire 9f1aef53fa Fix dissector logic (#1626)
* Fix typo in Wireshark dissector

* Fix wireshark dissector prefs_changed logic

The previous logic had several issues:
- Changing only the port number (without toggling all_ports) would
  not re-register the dissector on the new port.
- Turning all_ports off would remove all registrations but only
  re-add the specific port inside a branch that also required
  all_ports to have changed, and never updated default_settings.port.

Simplify to: remove all registrations, then register based on current
prefs, then update the cached state.
2026-03-23 11:15:40 -04:00
Jay R. Wren 1aa1a0476f #ECCN:Open Source in CODEOWNERS (#1632)
gofmt / Run gofmt (push) Failing after 3s
smoke-extra / Run extra smoke tests (push) Failing after 3s
smoke / Run multi node smoke test (push) Failing after 2s
Build and test / Build all and test on ubuntu-linux (push) Failing after 3s
Build and test / Build and test on linux with boringcrypto (push) Failing after 2s
Build and test / Build and test on linux with pkcs11 (push) Failing after 3s
Build and test / Build and test on macos-latest (push) Has been cancelled
Build and test / Build and test on windows-latest (push) Has been cancelled
Salesforce is requesting this in all opensource repositories
2026-03-16 17:07:40 -04:00
Jay R. Wren 7760ccefba fix logging copy pasta (#1621)
gofmt / Run gofmt (push) Failing after 3s
smoke-extra / Run extra smoke tests (push) Failing after 3s
smoke / Run multi node smoke test (push) Failing after 2s
Build and test / Build all and test on ubuntu-linux (push) Failing after 3s
Build and test / Build and test on linux with boringcrypto (push) Failing after 3s
Build and test / Build and test on linux with pkcs11 (push) Failing after 2s
Build and test / Build and test on macos-latest (push) Has been cancelled
Build and test / Build and test on windows-latest (push) Has been cancelled
2026-03-06 14:03:32 -05:00
Jack Doan 51308b845b connection-track ICMP traffic (#1602)
gofmt / Run gofmt (push) Failing after 2s
smoke-extra / Run extra smoke tests (push) Failing after 3s
smoke / Run multi node smoke test (push) Failing after 2s
Build and test / Build all and test on ubuntu-linux (push) Failing after 2s
Build and test / Build and test on linux with boringcrypto (push) Failing after 2s
Build and test / Build and test on linux with pkcs11 (push) Failing after 2s
Build and test / Build and test on macos-latest (push) Has been cancelled
Build and test / Build and test on windows-latest (push) Has been cancelled
* connection-track ICMP and ICMPv6 traffic

* icmpv6 only has identifier on echo
2026-02-18 23:19:37 -06:00
Wade Simmons 422fc2ad1e go fix (#1608)
gofmt / Run gofmt (push) Failing after 3s
smoke-extra / Run extra smoke tests (push) Failing after 2s
smoke / Run multi node smoke test (push) Failing after 2s
Build and test / Build all and test on ubuntu-linux (push) Failing after 2s
Build and test / Build and test on linux with boringcrypto (push) Failing after 3s
Build and test / Build and test on linux with pkcs11 (push) Failing after 2s
Build and test / Build and test on macos-latest (push) Has been cancelled
Build and test / Build and test on windows-latest (push) Has been cancelled
2026-02-17 11:42:14 -05:00
Wade Simmons e8bb874e14 smoke-extra: try AMD-V workaround (#1610)
gofmt / Run gofmt (push) Failing after 3s
smoke-extra / Run extra smoke tests (push) Failing after 2s
smoke / Run multi node smoke test (push) Failing after 2s
Build and test / Build all and test on ubuntu-linux (push) Failing after 3s
Build and test / Build and test on linux with boringcrypto (push) Failing after 2s
Build and test / Build and test on linux with pkcs11 (push) Failing after 2s
Build and test / Build and test on macos-latest (push) Has been cancelled
Build and test / Build and test on windows-latest (push) Has been cancelled
* smoke-extra: try AMD-V workaround

- https://github.com/slackhq/nebula/actions/runs/21995850645/job/63555492676?pr=1602
- https://github.com/actions/runner-images/issues/13202
- https://github.com/cri-o/packaging/pull/306/changes
2026-02-13 12:55:19 -06:00
Jack Doan 353ad1f271 firewall: icmp no longer requires a port spec (#1609) 2026-02-13 11:10:40 -06:00
Jack Doan f573e8a266 Merge commit from fork
gofmt / Run gofmt (push) Failing after 3s
smoke-extra / Run extra smoke tests (push) Failing after 2s
smoke / Run multi node smoke test (push) Failing after 3s
Build and test / Build all and test on ubuntu-linux (push) Failing after 2s
Build and test / Build and test on linux with boringcrypto (push) Failing after 3s
Build and test / Build and test on linux with pkcs11 (push) Failing after 2s
Build and test / Build and test on macos-latest (push) Has been cancelled
Build and test / Build and test on windows-latest (push) Has been cancelled
Newly signed P256 based certificates will have their signature clamped to the low-s form.

Update CHANGELOG.md
2026-02-06 14:26:51 -05:00
Jack Doan 42bee7cf17 Report if Nebula start fails because of tun device name (#1588)
gofmt / Run gofmt (push) Failing after 2s
smoke-extra / Run extra smoke tests (push) Failing after 2s
smoke / Run multi node smoke test (push) Failing after 2s
Build and test / Build all and test on ubuntu-linux (push) Failing after 2s
Build and test / Build and test on linux with boringcrypto (push) Failing after 2s
Build and test / Build and test on linux with pkcs11 (push) Failing after 2s
Build and test / Build and test on macos-latest (push) Has been cancelled
Build and test / Build and test on windows-latest (push) Has been cancelled
* specifically report if nebula start fails because of tun device name

* close all routines when closing the tun
2026-01-28 10:03:36 -06:00
Caleb Jasik 02d8bcac68 Remove lighthouse goroutine leaks in lighthouse_test.go (#1589)
gofmt / Run gofmt (push) Failing after 3s
smoke-extra / Run extra smoke tests (push) Failing after 2s
smoke / Run multi node smoke test (push) Failing after 2s
Build and test / Build all and test on ubuntu-linux (push) Failing after 3s
Build and test / Build and test on linux with boringcrypto (push) Failing after 2s
Build and test / Build and test on linux with pkcs11 (push) Failing after 2s
Build and test / Build and test on macos-latest (push) Has been cancelled
Build and test / Build and test on windows-latest (push) Has been cancelled
Using <https://go.dev/doc/go1.26#goroutineleak-profiles> + Claude, I was able to run nebula's unit tests and e2e tests with the leak detector enabled.

Added a TestMain that queries pprof to see if there are any reported goroutine leaks.
I'd love to get some form of this in CI whenever go 1.26 comes out, though I'd also like to prove this is properly useful past the just five detections it got here.

<details>
<summary>TestMain</summary>


```go
package nebula

import (
    "fmt"
    "os"
    "runtime/pprof"
    "strings"
    "testing"
)

// TestMain runs after all tests and checks for goroutine leaks
func TestMain(m *testing.M) {
    // Run all tests
    exitCode := m.Run()

    // Check for goroutine leaks after all tests complete
    prof := pprof.Lookup("goroutineleak")
    if prof != nil {
        var sb strings.Builder
        if err := prof.WriteTo(&sb, 2); err != nil {
            fmt.Fprintf(os.Stderr, "Failed to write goroutineleak profile: %v\n", err)
            os.Exit(1)
        }

        content := sb.String()
        leakedCount := strings.Count(content, "(leaked)")

        if leakedCount > 0 {
            fmt.Fprintf(os.Stderr, "\n=== GOROUTINE LEAK DETECTED ===\n")
            fmt.Fprintf(os.Stderr, "Found %d leaked goroutine(s) in package nebula\n\n", leakedCount)

            goros := strings.Split(content, "\n\n")
            for _, goro := range goros {
                if strings.Contains(goro, "(leaked)") {
                    fmt.Fprintln(os.Stderr, goro)
                    fmt.Fprintln(os.Stderr)
                }
            }
            os.Exit(1)
        } else {
            fmt.Println("✓ No goroutine leaks detected in package nebula")
        }
    }

    os.Exit(exitCode)
}
```

</details>

Also had to install go1.26rc2 and update the makefile to use that go binary + set ex:

```makefile
test-goroutineleak:
	GOEXPERIMENT=goroutineleakprofile go1.26rc2 test -v ./...
```
2026-01-27 23:44:43 -06:00
Wade Simmons 0b02d982b2 v1.10.2 (#1584)
gofmt / Run gofmt (push) Failing after 3s
smoke-extra / Run extra smoke tests (push) Failing after 2s
smoke / Run multi node smoke test (push) Failing after 3s
Build and test / Build all and test on ubuntu-linux (push) Failing after 2s
Build and test / Build and test on linux with boringcrypto (push) Failing after 2s
Build and test / Build and test on linux with pkcs11 (push) Failing after 2s
Build and test / Build and test on macos-latest (push) Has been cancelled
Build and test / Build and test on windows-latest (push) Has been cancelled
Update CHANGELOG for Nebula v1.10.2
2026-01-21 12:42:34 -05:00
Wade Simmons e1e92f017c initialize routesFromSystem (#1580)
gofmt / Run gofmt (push) Failing after 3s
smoke-extra / Run extra smoke tests (push) Failing after 2s
smoke / Run multi node smoke test (push) Failing after 3s
Build and test / Build all and test on ubuntu-linux (push) Failing after 2s
Build and test / Build and test on linux with boringcrypto (push) Failing after 2s
Build and test / Build and test on linux with pkcs11 (push) Failing after 2s
Build and test / Build and test on macos-latest (push) Has been cancelled
Build and test / Build and test on windows-latest (push) Has been cancelled
This is a regression introduced by #1573. We need to initialize this
map.

Fixes: #1579
2026-01-20 11:15:20 -05:00
zhetaicheleba e5f60fa54f chore: fix some typos in comments (#1582)
Signed-off-by: zhetaicheleba <taicheleba@outlook.com>
2026-01-20 11:03:31 -05:00
dependabot[bot] bf49e78243 Bump github.com/sirupsen/logrus from 1.9.3 to 1.9.4 (#1581)
Bumps [github.com/sirupsen/logrus](https://github.com/sirupsen/logrus) from 1.9.3 to 1.9.4.
- [Release notes](https://github.com/sirupsen/logrus/releases)
- [Changelog](https://github.com/sirupsen/logrus/blob/master/CHANGELOG.md)
- [Commits](https://github.com/sirupsen/logrus/compare/v1.9.3...v1.9.4)

---
updated-dependencies:
- dependency-name: github.com/sirupsen/logrus
  dependency-version: 1.9.4
  dependency-type: direct:production
  update-type: version-update:semver-patch
...

Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
2026-01-20 10:40:24 -05:00
46 changed files with 964 additions and 201 deletions
+3
View File
@@ -30,6 +30,9 @@ jobs:
- name: add hashicorp source - name: add hashicorp source
run: wget -O- https://apt.releases.hashicorp.com/gpg | gpg --dearmor | sudo tee /usr/share/keyrings/hashicorp-archive-keyring.gpg && echo "deb [signed-by=/usr/share/keyrings/hashicorp-archive-keyring.gpg] https://apt.releases.hashicorp.com $(lsb_release -cs) main" | sudo tee /etc/apt/sources.list.d/hashicorp.list run: wget -O- https://apt.releases.hashicorp.com/gpg | gpg --dearmor | sudo tee /usr/share/keyrings/hashicorp-archive-keyring.gpg && echo "deb [signed-by=/usr/share/keyrings/hashicorp-archive-keyring.gpg] https://apt.releases.hashicorp.com $(lsb_release -cs) main" | sudo tee /etc/apt/sources.list.d/hashicorp.list
- name: workaround AMD-V issue # https://github.com/cri-o/packaging/pull/306
run: sudo rmmod kvm_amd
- name: install vagrant - name: install vagrant
run: sudo apt-get update && sudo apt-get install -y vagrant virtualbox run: sudo apt-get update && sudo apt-get install -y vagrant virtualbox
+10 -9
View File
@@ -37,17 +37,18 @@ docker run --name host4 --device /dev/net/tun:/dev/net/tun --cap-add NET_ADMIN -
sleep 1 sleep 1
# grab tcpdump pcaps for debugging # grab tcpdump pcaps for debugging
docker exec lighthouse1 tcpdump -i nebula1 -q -w - -U 2>logs/lighthouse1.inside.log >logs/lighthouse1.inside.pcap & docker exec lighthouse1 tcpdump -i tun0 -q -w - -U 2>logs/lighthouse1.inside.log >logs/lighthouse1.inside.pcap &
docker exec lighthouse1 tcpdump -i eth0 -q -w - -U 2>logs/lighthouse1.outside.log >logs/lighthouse1.outside.pcap & docker exec lighthouse1 tcpdump -i eth0 -q -w - -U 2>logs/lighthouse1.outside.log >logs/lighthouse1.outside.pcap &
docker exec host2 tcpdump -i nebula1 -q -w - -U 2>logs/host2.inside.log >logs/host2.inside.pcap & docker exec host2 tcpdump -i tun0 -q -w - -U 2>logs/host2.inside.log >logs/host2.inside.pcap &
docker exec host2 tcpdump -i eth0 -q -w - -U 2>logs/host2.outside.log >logs/host2.outside.pcap & docker exec host2 tcpdump -i eth0 -q -w - -U 2>logs/host2.outside.log >logs/host2.outside.pcap &
docker exec host3 tcpdump -i nebula1 -q -w - -U 2>logs/host3.inside.log >logs/host3.inside.pcap & docker exec host3 tcpdump -i tun0 -q -w - -U 2>logs/host3.inside.log >logs/host3.inside.pcap &
docker exec host3 tcpdump -i eth0 -q -w - -U 2>logs/host3.outside.log >logs/host3.outside.pcap & docker exec host3 tcpdump -i eth0 -q -w - -U 2>logs/host3.outside.log >logs/host3.outside.pcap &
docker exec host4 tcpdump -i nebula1 -q -w - -U 2>logs/host4.inside.log >logs/host4.inside.pcap & docker exec host4 tcpdump -i tun0 -q -w - -U 2>logs/host4.inside.log >logs/host4.inside.pcap &
docker exec host4 tcpdump -i eth0 -q -w - -U 2>logs/host4.outside.log >logs/host4.outside.pcap & docker exec host4 tcpdump -i eth0 -q -w - -U 2>logs/host4.outside.log >logs/host4.outside.pcap &
docker exec host2 ncat -nklv 0.0.0.0 2000 & docker exec host2 ncat -nklv 0.0.0.0 2000 &
docker exec host3 ncat -nklv 0.0.0.0 2000 & docker exec host3 ncat -nklv 0.0.0.0 2000 &
docker exec host4 ncat -nkluv 0.0.0.0 4000 &
docker exec host2 ncat -e '/usr/bin/echo host2' -nkluv 0.0.0.0 3000 & docker exec host2 ncat -e '/usr/bin/echo host2' -nkluv 0.0.0.0 3000 &
docker exec host3 ncat -e '/usr/bin/echo host3' -nkluv 0.0.0.0 3000 & docker exec host3 ncat -e '/usr/bin/echo host3' -nkluv 0.0.0.0 3000 &
@@ -119,11 +120,11 @@ echo
echo " *** Testing conntrack" echo " *** Testing conntrack"
echo echo
set -x set -x
# host2 can ping host3 now that host3 pinged it first
docker exec host2 ping -c1 192.168.100.3 # host2 speaking to host4 on UDP 4000 should allow it to reply, when firewall rules would normally not permit this
# host4 can ping host2 once conntrack established docker exec host2 sh -c "/usr/bin/echo host2 | ncat -nuv 192.168.100.4 4000"
docker exec host2 ping -c1 192.168.100.4 docker exec host2 ncat -e '/usr/bin/echo helloagainfromhost2' -nkluv 0.0.0.0 4000 &
docker exec host4 ping -c1 192.168.100.2 docker exec host4 sh -c "/usr/bin/echo host4 | ncat -nuv 192.168.100.2 4000"
docker exec host4 sh -c 'kill 1' docker exec host4 sh -c 'kill 1'
docker exec host3 sh -c 'kill 1' docker exec host3 sh -c 'kill 1'
+27 -1
View File
@@ -7,6 +7,30 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
## [Unreleased] ## [Unreleased]
## [1.10.3] - 2026-02-06
### Security
- Fix an issue where blocklist bypass is possible when using curve P256 since the signature can have 2 valid representations.
Both fingerprint representations will be tested against the blocklist.
Any newly issued P256 based certificates will have their signature clamped to the low-s form.
Nebula will assert the low-s signature form when validating certificates in a future version. [GHSA-69x3-g4r3-p962](https://github.com/slackhq/nebula/security/advisories/GHSA-69x3-g4r3-p962)
### Changed
- Improve error reporting if nebula fails to start due to a tun device naming issue. (#1588)
## [1.10.2] - 2026-01-21
### Fixed
- Fix panic when using `use_system_route_table` that was introduced in v1.10.1. (#1580)
### Changed
- Fix some typos in comments. (#1582)
- Dependency updates. (#1581)
## [1.10.1] - 2026-01-16 ## [1.10.1] - 2026-01-16
See the [v1.10.1](https://github.com/slackhq/nebula/milestone/26?closed=1) milestone for a complete list of changes. See the [v1.10.1](https://github.com/slackhq/nebula/milestone/26?closed=1) milestone for a complete list of changes.
@@ -764,7 +788,9 @@ created.)
- Initial public release. - Initial public release.
[Unreleased]: https://github.com/slackhq/nebula/compare/v1.10.1...HEAD [Unreleased]: https://github.com/slackhq/nebula/compare/v1.10.3...HEAD
[1.10.3]: https://github.com/slackhq/nebula/releases/tag/v1.10.3
[1.10.2]: https://github.com/slackhq/nebula/releases/tag/v1.10.2
[1.10.1]: https://github.com/slackhq/nebula/releases/tag/v1.10.1 [1.10.1]: https://github.com/slackhq/nebula/releases/tag/v1.10.1
[1.10.0]: https://github.com/slackhq/nebula/releases/tag/v1.10.0 [1.10.0]: https://github.com/slackhq/nebula/releases/tag/v1.10.0
[1.9.7]: https://github.com/slackhq/nebula/releases/tag/v1.9.7 [1.9.7]: https://github.com/slackhq/nebula/releases/tag/v1.9.7
+1
View File
@@ -0,0 +1 @@
#ECCN:Open Source
-1
View File
@@ -1,5 +1,4 @@
//go:build boringcrypto //go:build boringcrypto
// +build boringcrypto
package nebula package nebula
+18
View File
@@ -141,10 +141,23 @@ func (ncp *CAPool) VerifyCertificate(now time.Time, c Certificate) (*CachedCerti
return nil, err return nil, err
} }
// Pre nebula v1.10.3 could generate signatures in either high or low s form and validation
// of signatures allowed for either. Nebula v1.10.3 and beyond clamps signature generation to low-s form
// but validation still allows for either. Since a change in the signature bytes affects the fingerprint, we
// need to test both forms until such a time comes that we enforce low-s form on signature validation.
fp2, err := CalculateAlternateFingerprint(c)
if err != nil {
return nil, fmt.Errorf("could not calculate alternate fingerprint to verify: %w", err)
}
if fp2 != "" && ncp.IsBlocklisted(fp2) {
return nil, ErrBlockListed
}
cc := CachedCertificate{ cc := CachedCertificate{
Certificate: c, Certificate: c,
InvertedGroups: make(map[string]struct{}), InvertedGroups: make(map[string]struct{}),
Fingerprint: fp, Fingerprint: fp,
fingerprint2: fp2,
signerFingerprint: signer.Fingerprint, signerFingerprint: signer.Fingerprint,
} }
@@ -158,6 +171,11 @@ func (ncp *CAPool) VerifyCertificate(now time.Time, c Certificate) (*CachedCerti
// VerifyCachedCertificate is the same as VerifyCertificate other than it operates on a pre-verified structure and // VerifyCachedCertificate is the same as VerifyCertificate other than it operates on a pre-verified structure and
// is a cheaper operation to perform as a result. // is a cheaper operation to perform as a result.
func (ncp *CAPool) VerifyCachedCertificate(now time.Time, c *CachedCertificate) error { func (ncp *CAPool) VerifyCachedCertificate(now time.Time, c *CachedCertificate) error {
// Check any available alternate fingerprint forms for this certificate, re P256 high-s/low-s
if c.fingerprint2 != "" && ncp.IsBlocklisted(c.fingerprint2) {
return ErrBlockListed
}
_, err := ncp.verify(c.Certificate, now, c.Fingerprint, c.signerFingerprint) _, err := ncp.verify(c.Certificate, now, c.Fingerprint, c.signerFingerprint)
return err return err
} }
+43 -4
View File
@@ -5,6 +5,7 @@ import (
"testing" "testing"
"time" "time"
"github.com/slackhq/nebula/cert/p256"
"github.com/stretchr/testify/assert" "github.com/stretchr/testify/assert"
"github.com/stretchr/testify/require" "github.com/stretchr/testify/require"
) )
@@ -170,6 +171,15 @@ func TestCertificateV1_VerifyP256(t *testing.T) {
_, err = caPool.VerifyCertificate(time.Now(), c) _, err = caPool.VerifyCertificate(time.Now(), c)
require.EqualError(t, err, "certificate is in the block list") require.EqualError(t, err, "certificate is in the block list")
// Create a copy of the cert and swap to the alternate form for the signature
nc := c.Copy()
b, err := p256.Swap(c.Signature())
require.NoError(t, err)
require.NoError(t, nc.(*certificateV1).setSignature(b))
_, err = caPool.VerifyCertificate(time.Now(), nc)
require.EqualError(t, err, "certificate is in the block list")
caPool.ResetCertBlocklist() caPool.ResetCertBlocklist()
_, err = caPool.VerifyCertificate(time.Now(), c) _, err = caPool.VerifyCertificate(time.Now(), c)
require.NoError(t, err) require.NoError(t, err)
@@ -187,7 +197,7 @@ func TestCertificateV1_VerifyP256(t *testing.T) {
require.NoError(t, err) require.NoError(t, err)
caPool = NewCAPool() caPool = NewCAPool()
b, err := caPool.AddCAFromPEM(caPem) b, err = caPool.AddCAFromPEM(caPem)
require.NoError(t, err) require.NoError(t, err)
assert.Empty(t, b) assert.Empty(t, b)
@@ -196,7 +206,17 @@ func TestCertificateV1_VerifyP256(t *testing.T) {
}) })
c, _, _, _ = NewTestCert(Version1, Curve_P256, ca, caKey, "test", time.Now(), time.Now().Add(5*time.Minute), nil, nil, []string{"test1"}) c, _, _, _ = NewTestCert(Version1, Curve_P256, ca, caKey, "test", time.Now(), time.Now().Add(5*time.Minute), nil, nil, []string{"test1"})
_, err = caPool.VerifyCertificate(time.Now(), c) cc, err := caPool.VerifyCertificate(time.Now(), c)
require.NoError(t, err)
// Reset the blocklist and block the alternate form fingerprint
caPool.ResetCertBlocklist()
caPool.BlocklistFingerprint(cc.fingerprint2)
err = caPool.VerifyCachedCertificate(time.Now(), cc)
require.EqualError(t, err, "certificate is in the block list")
caPool.ResetCertBlocklist()
err = caPool.VerifyCachedCertificate(time.Now(), cc)
require.NoError(t, err) require.NoError(t, err)
} }
@@ -394,6 +414,15 @@ func TestCertificateV2_VerifyP256(t *testing.T) {
_, err = caPool.VerifyCertificate(time.Now(), c) _, err = caPool.VerifyCertificate(time.Now(), c)
require.EqualError(t, err, "certificate is in the block list") require.EqualError(t, err, "certificate is in the block list")
// Create a copy of the cert and swap to the alternate form for the signature
nc := c.Copy()
b, err := p256.Swap(c.Signature())
require.NoError(t, err)
require.NoError(t, nc.(*certificateV2).setSignature(b))
_, err = caPool.VerifyCertificate(time.Now(), nc)
require.EqualError(t, err, "certificate is in the block list")
caPool.ResetCertBlocklist() caPool.ResetCertBlocklist()
_, err = caPool.VerifyCertificate(time.Now(), c) _, err = caPool.VerifyCertificate(time.Now(), c)
require.NoError(t, err) require.NoError(t, err)
@@ -411,7 +440,7 @@ func TestCertificateV2_VerifyP256(t *testing.T) {
require.NoError(t, err) require.NoError(t, err)
caPool = NewCAPool() caPool = NewCAPool()
b, err := caPool.AddCAFromPEM(caPem) b, err = caPool.AddCAFromPEM(caPem)
require.NoError(t, err) require.NoError(t, err)
assert.Empty(t, b) assert.Empty(t, b)
@@ -420,7 +449,17 @@ func TestCertificateV2_VerifyP256(t *testing.T) {
}) })
c, _, _, _ = NewTestCert(Version2, Curve_P256, ca, caKey, "test", time.Now(), time.Now().Add(5*time.Minute), nil, nil, []string{"test1"}) c, _, _, _ = NewTestCert(Version2, Curve_P256, ca, caKey, "test", time.Now(), time.Now().Add(5*time.Minute), nil, nil, []string{"test1"})
_, err = caPool.VerifyCertificate(time.Now(), c) cc, err := caPool.VerifyCertificate(time.Now(), c)
require.NoError(t, err)
// Reset the blocklist and block the alternate form fingerprint
caPool.ResetCertBlocklist()
caPool.BlocklistFingerprint(cc.fingerprint2)
err = caPool.VerifyCachedCertificate(time.Now(), cc)
require.EqualError(t, err, "certificate is in the block list")
caPool.ResetCertBlocklist()
err = caPool.VerifyCachedCertificate(time.Now(), cc)
require.NoError(t, err) require.NoError(t, err)
} }
+33
View File
@@ -4,6 +4,8 @@ import (
"fmt" "fmt"
"net/netip" "net/netip"
"time" "time"
"github.com/slackhq/nebula/cert/p256"
) )
type Version uint8 type Version uint8
@@ -110,6 +112,9 @@ type CachedCertificate struct {
InvertedGroups map[string]struct{} InvertedGroups map[string]struct{}
Fingerprint string Fingerprint string
signerFingerprint string signerFingerprint string
// A place to store a 2nd fingerprint if the certificate could have one, such as with P256
fingerprint2 string
} }
func (cc *CachedCertificate) String() string { func (cc *CachedCertificate) String() string {
@@ -152,3 +157,31 @@ func Recombine(v Version, rawCertBytes, publicKey []byte, curve Curve) (Certific
return c, nil return c, nil
} }
// CalculateAlternateFingerprint calculates a 2nd fingerprint representation for P256 certificates
// CAPool blocklist testing through `VerifyCertificate` and `VerifyCachedCertificate` automatically performs this step.
func CalculateAlternateFingerprint(c Certificate) (string, error) {
if c.Curve() != Curve_P256 {
return "", nil
}
nc := c.Copy()
b, err := p256.Swap(nc.Signature())
if err != nil {
return "", err
}
switch v := nc.(type) {
case *certificateV1:
err = v.setSignature(b)
case *certificateV2:
err = v.setSignature(b)
default:
return "", ErrUnknownVersion
}
if err != nil {
return "", err
}
return nc.Fingerprint()
}
+1 -1
View File
@@ -79,7 +79,7 @@ qrlJ69wer3ZUHFXA
assert.Nil(t, k) assert.Nil(t, k)
assert.Equal(t, rest, invalidPem) assert.Equal(t, rest, invalidPem)
// Fail due to ivalid PEM format, because // Fail due to invalid PEM format, because
// it's missing the requisite pre-encapsulation boundary. // it's missing the requisite pre-encapsulation boundary.
curve, k, rest, err = DecryptAndUnmarshalSigningPrivateKey(passphrase, rest) curve, k, rest, err = DecryptAndUnmarshalSigningPrivateKey(passphrase, rest)
require.EqualError(t, err, "input did not contain a valid PEM encoded block") require.EqualError(t, err, "input did not contain a valid PEM encoded block")
+122
View File
@@ -0,0 +1,122 @@
package p256
import (
"crypto/elliptic"
"errors"
"math/big"
"filippo.io/bigmod"
"golang.org/x/crypto/cryptobyte"
"golang.org/x/crypto/cryptobyte/asn1"
)
var halfN = new(big.Int).Rsh(elliptic.P256().Params().N, 1)
var nMod *bigmod.Modulus
func init() {
n, err := bigmod.NewModulus(elliptic.P256().Params().N.Bytes())
if err != nil {
panic(err)
}
nMod = n
}
func IsNormalized(sig []byte) (bool, error) {
r, s, err := parseSignature(sig)
if err != nil {
return false, err
}
return checkLowS(r, s), nil
}
func checkLowS(_, s []byte) bool {
bigS := new(big.Int).SetBytes(s)
// Check if S <= (N/2), because we want to include the midpoint in the set of low-s
return bigS.Cmp(halfN) <= 0
}
func swap(r, s []byte) ([]byte, []byte, error) {
var err error
bigS, err := bigmod.NewNat().SetBytes(s, nMod)
if err != nil {
return nil, nil, err
}
sNormalized := nMod.Nat().Sub(bigS, nMod)
return r, sNormalized.Bytes(nMod), nil
}
func Normalize(sig []byte) ([]byte, error) {
r, s, err := parseSignature(sig)
if err != nil {
return nil, err
}
if checkLowS(r, s) {
return sig, nil
}
newR, newS, err := swap(r, s)
if err != nil {
return nil, err
}
return encodeSignature(newR, newS)
}
// Swap will change sig between its current form to the opposite high or low form.
func Swap(sig []byte) ([]byte, error) {
r, s, err := parseSignature(sig)
if err != nil {
return nil, err
}
newR, newS, err := swap(r, s)
if err != nil {
return nil, err
}
return encodeSignature(newR, newS)
}
// parseSignature taken exactly from crypto/ecdsa/ecdsa.go
func parseSignature(sig []byte) (r, s []byte, err error) {
var inner cryptobyte.String
input := cryptobyte.String(sig)
if !input.ReadASN1(&inner, asn1.SEQUENCE) ||
!input.Empty() ||
!inner.ReadASN1Integer(&r) ||
!inner.ReadASN1Integer(&s) ||
!inner.Empty() {
return nil, nil, errors.New("invalid ASN.1")
}
return r, s, nil
}
func encodeSignature(r, s []byte) ([]byte, error) {
var b cryptobyte.Builder
b.AddASN1(asn1.SEQUENCE, func(b *cryptobyte.Builder) {
addASN1IntBytes(b, r)
addASN1IntBytes(b, s)
})
return b.Bytes()
}
// addASN1IntBytes encodes in ASN.1 a positive integer represented as
// a big-endian byte slice with zero or more leading zeroes.
func addASN1IntBytes(b *cryptobyte.Builder, bytes []byte) {
for len(bytes) > 0 && bytes[0] == 0 {
bytes = bytes[1:]
}
if len(bytes) == 0 {
b.SetError(errors.New("invalid integer"))
return
}
b.AddASN1(asn1.INTEGER, func(c *cryptobyte.Builder) {
if bytes[0]&0x80 != 0 {
c.AddUint8(0)
}
c.AddBytes(bytes)
})
}
+28
View File
@@ -0,0 +1,28 @@
package p256
import (
"crypto/ecdsa"
"crypto/elliptic"
"crypto/rand"
"testing"
"github.com/stretchr/testify/require"
)
func TestFlipping(t *testing.T) {
priv, err1 := ecdsa.GenerateKey(elliptic.P256(), rand.Reader)
require.NoError(t, err1)
out, err := ecdsa.SignASN1(rand.Reader, priv, []byte("big chungus"))
require.NoError(t, err)
r, s, err := parseSignature(out)
require.NoError(t, err)
r, s1, err := swap(r, s)
require.NoError(t, err)
r, s2, err := swap(r, s1)
require.NoError(t, err)
require.Equal(t, s, s2)
require.NotEqual(t, s, s1)
}
+5 -5
View File
@@ -44,7 +44,7 @@ bzBEr00kERQxxTzTsH8cpYEgRoipvmExvg8WP8NdAJEYJosB
assert.Equal(t, rest, invalidPem) assert.Equal(t, rest, invalidPem)
require.EqualError(t, err, "bytes did not contain a proper certificate banner") require.EqualError(t, err, "bytes did not contain a proper certificate banner")
// Fail due to ivalid PEM format, because // Fail due to invalid PEM format, because
// it's missing the requisite pre-encapsulation boundary. // it's missing the requisite pre-encapsulation boundary.
cert, rest, err = UnmarshalCertificateFromPEM(rest) cert, rest, err = UnmarshalCertificateFromPEM(rest)
assert.Nil(t, cert) assert.Nil(t, cert)
@@ -106,7 +106,7 @@ AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
assert.Equal(t, rest, invalidPem) assert.Equal(t, rest, invalidPem)
require.EqualError(t, err, "bytes did not contain a proper Ed25519/ECDSA private key banner") require.EqualError(t, err, "bytes did not contain a proper Ed25519/ECDSA private key banner")
// Fail due to ivalid PEM format, because // Fail due to invalid PEM format, because
// it's missing the requisite pre-encapsulation boundary. // it's missing the requisite pre-encapsulation boundary.
k, rest, curve, err = UnmarshalSigningPrivateKeyFromPEM(rest) k, rest, curve, err = UnmarshalSigningPrivateKeyFromPEM(rest)
assert.Nil(t, k) assert.Nil(t, k)
@@ -168,7 +168,7 @@ AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA=
assert.Equal(t, rest, invalidPem) assert.Equal(t, rest, invalidPem)
require.EqualError(t, err, "bytes did not contain a proper private key banner") require.EqualError(t, err, "bytes did not contain a proper private key banner")
// Fail due to ivalid PEM format, because // Fail due to invalid PEM format, because
// it's missing the requisite pre-encapsulation boundary. // it's missing the requisite pre-encapsulation boundary.
k, rest, curve, err = UnmarshalPrivateKeyFromPEM(rest) k, rest, curve, err = UnmarshalPrivateKeyFromPEM(rest)
assert.Nil(t, k) assert.Nil(t, k)
@@ -221,7 +221,7 @@ AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA=
require.EqualError(t, err, "bytes did not contain a proper public key banner") require.EqualError(t, err, "bytes did not contain a proper public key banner")
assert.Equal(t, rest, invalidPem) assert.Equal(t, rest, invalidPem)
// Fail due to ivalid PEM format, because // Fail due to invalid PEM format, because
// it's missing the requisite pre-encapsulation boundary. // it's missing the requisite pre-encapsulation boundary.
k, rest, curve, err = UnmarshalPublicKeyFromPEM(rest) k, rest, curve, err = UnmarshalPublicKeyFromPEM(rest)
assert.Nil(t, k) assert.Nil(t, k)
@@ -299,7 +299,7 @@ AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA=
require.EqualError(t, err, "bytes did not contain a proper public key banner") require.EqualError(t, err, "bytes did not contain a proper public key banner")
assert.Equal(t, rest, invalidPem) assert.Equal(t, rest, invalidPem)
// Fail due to ivalid PEM format, because // Fail due to invalid PEM format, because
// it's missing the requisite pre-encapsulation boundary. // it's missing the requisite pre-encapsulation boundary.
k, rest, curve, err = UnmarshalPublicKeyFromPEM(rest) k, rest, curve, err = UnmarshalPublicKeyFromPEM(rest)
assert.Nil(t, k) assert.Nil(t, k)
+9
View File
@@ -9,6 +9,8 @@ import (
"fmt" "fmt"
"net/netip" "net/netip"
"time" "time"
"github.com/slackhq/nebula/cert/p256"
) )
// TBSCertificate represents a certificate intended to be signed. // TBSCertificate represents a certificate intended to be signed.
@@ -126,6 +128,13 @@ func (t *TBSCertificate) SignWith(signer Certificate, curve Curve, sp SignerLamb
return nil, err return nil, err
} }
if curve == Curve_P256 {
sig, err = p256.Normalize(sig)
if err != nil {
return nil, err
}
}
err = c.setSignature(sig) err = c.setSignature(sig)
if err != nil { if err != nil {
return nil, err return nil, err
+46
View File
@@ -9,6 +9,7 @@ import (
"testing" "testing"
"time" "time"
"github.com/slackhq/nebula/cert/p256"
"github.com/stretchr/testify/assert" "github.com/stretchr/testify/assert"
"github.com/stretchr/testify/require" "github.com/stretchr/testify/require"
) )
@@ -89,3 +90,48 @@ func TestCertificateV1_SignP256(t *testing.T) {
require.NoError(t, err) require.NoError(t, err)
assert.NotNil(t, uc) assert.NotNil(t, uc)
} }
func TestCertificate_SignP256_AlwaysNormalized(t *testing.T) {
before := time.Now().Add(time.Second * -60).Round(time.Second)
after := time.Now().Add(time.Second * 60).Round(time.Second)
pubKey := []byte("01234567890abcedfghij1234567890ab1234567890abcedfghij1234567890ab")
tbs := TBSCertificate{
Version: Version1,
Name: "testing",
Networks: []netip.Prefix{
mustParsePrefixUnmapped("10.1.1.1/24"),
mustParsePrefixUnmapped("10.1.1.2/16"),
},
UnsafeNetworks: []netip.Prefix{
mustParsePrefixUnmapped("9.1.1.2/24"),
mustParsePrefixUnmapped("9.1.1.3/16"),
},
Groups: []string{"test-group1", "test-group2", "test-group3"},
NotBefore: before,
NotAfter: after,
PublicKey: pubKey,
IsCA: true,
Curve: Curve_P256,
}
priv, err := ecdsa.GenerateKey(elliptic.P256(), rand.Reader)
require.NoError(t, err)
pub := elliptic.Marshal(elliptic.P256(), priv.PublicKey.X, priv.PublicKey.Y)
rawPriv := priv.D.FillBytes(make([]byte, 32))
for i := 0; i < 1000; i++ {
if i&1 == 1 {
tbs.Version = Version1
} else {
tbs.Version = Version2
}
c, err := tbs.Sign(nil, Curve_P256, rawPriv)
require.NoError(t, err)
assert.NotNil(t, c)
assert.True(t, c.CheckSignature(pub))
normie, err := p256.IsNormalized(c.Signature())
require.NoError(t, err)
assert.True(t, normie)
}
}
+1 -1
View File
@@ -200,7 +200,7 @@ func Test_ca(t *testing.T) {
assert.Empty(t, b) assert.Empty(t, b)
assert.Len(t, lKey, 64) assert.Len(t, lKey, 64)
// test when reading passsword results in an error // test when reading password results in an error
os.Remove(keyF.Name()) os.Remove(keyF.Name())
os.Remove(crtF.Name()) os.Remove(crtF.Name())
ob.Reset() ob.Reset()
-1
View File
@@ -1,5 +1,4 @@
//go:build e2e_testing //go:build e2e_testing
// +build e2e_testing
package nebula package nebula
+8 -14
View File
@@ -84,30 +84,24 @@ end
function nebula.prefs_changed() function nebula.prefs_changed()
if default_settings.all_ports == nebula.prefs.all_ports and default_settings.port == nebula.prefs.port then if default_settings.all_ports == nebula.prefs.all_ports and default_settings.port == nebula.prefs.port then
-- Nothing changed, bail
return return
end end
-- Remove our old dissector -- Remove all existing registrations
DissectorTable.get("udp.port"):remove_all(nebula) DissectorTable.get("udp.port"):remove_all(nebula)
if nebula.prefs.all_ports and default_settings.all_ports ~= nebula.prefs.all_ports then if nebula.prefs.all_ports then
default_settings.all_port = nebula.prefs.all_ports -- Register on every port for hole punch capture
for i=0, 65535 do for i=0, 65535 do
DissectorTable.get("udp.port"):add(i, nebula) DissectorTable.get("udp.port"):add(i, nebula)
end end
else
-- no need to establish again on specific ports -- Register on the configured port only
return DissectorTable.get("udp.port"):add(nebula.prefs.port, nebula)
end end
default_settings.all_ports = nebula.prefs.all_ports
if default_settings.all_ports ~= nebula.prefs.all_ports then default_settings.port = nebula.prefs.port
-- Add our new port dissector
default_settings.port = nebula.prefs.port
DissectorTable.get("udp.port"):add(default_settings.port, nebula)
end
end end
DissectorTable.get("udp.port"):add(default_settings.port, nebula) DissectorTable.get("udp.port"):add(default_settings.port, nebula)
+105
View File
@@ -12,6 +12,8 @@ import (
"github.com/slackhq/nebula/cert" "github.com/slackhq/nebula/cert"
"github.com/slackhq/nebula/cert_test" "github.com/slackhq/nebula/cert_test"
"github.com/slackhq/nebula/e2e/router" "github.com/slackhq/nebula/e2e/router"
"github.com/slackhq/nebula/header"
"github.com/slackhq/nebula/udp"
"github.com/stretchr/testify/assert" "github.com/stretchr/testify/assert"
"gopkg.in/yaml.v3" "gopkg.in/yaml.v3"
) )
@@ -365,3 +367,106 @@ func TestCrossStackRelaysWork(t *testing.T) {
//theirControl.Stop() //theirControl.Stop()
//relayControl.Stop() //relayControl.Stop()
} }
func TestCloseTunnelAuthenticated(t *testing.T) {
ca, _, caKey, _ := cert_test.NewTestCaCert(cert.Version1, cert.Curve_CURVE25519, time.Now(), time.Now().Add(10*time.Minute), nil, nil, []string{})
myControl, myVpnIpNet, myUdpAddr, _ := newSimpleServer(cert.Version1, ca, caKey, "me", "10.128.0.1/24", m{"tunnels": m{"drop_inactive": true, "inactivity_timeout": "5s"}})
theirControl, theirVpnIpNet, theirUdpAddr, _ := newSimpleServer(cert.Version1, ca, caKey, "them", "10.128.0.2/24", m{"tunnels": m{"drop_inactive": true, "inactivity_timeout": "10m"}})
// Share our underlay information
myControl.InjectLightHouseAddr(theirVpnIpNet[0].Addr(), theirUdpAddr)
theirControl.InjectLightHouseAddr(myVpnIpNet[0].Addr(), myUdpAddr)
// Start the servers
myControl.Start()
theirControl.Start()
r := router.NewR(t, myControl, theirControl)
r.Log("Assert the tunnel between me and them works")
assertTunnel(t, myVpnIpNet[0].Addr(), theirVpnIpNet[0].Addr(), myControl, theirControl, r)
r.Log("Close the tunnel")
myControl.CloseTunnel(theirVpnIpNet[0].Addr(), false)
r.FlushAll()
waitStart := time.Now()
for {
myIndexes := len(myControl.GetHostmap().Indexes)
theirIndexes := len(theirControl.GetHostmap().Indexes)
if myIndexes == 0 && theirIndexes == 0 {
break
}
since := time.Since(waitStart)
r.Logf("my tunnels: %v; their tunnels: %v; duration: %v", myIndexes, theirIndexes, since)
if since > time.Second*6 {
t.Fatal("Tunnel should have been declared inactive after 2 seconds and before 6 seconds")
}
time.Sleep(1 * time.Second)
//r.FlushAll()
}
r.Logf("Happy path success, tunnels were dropped within %v", time.Since(waitStart))
myControl.InjectLightHouseAddr(theirVpnIpNet[0].Addr(), theirUdpAddr)
theirControl.InjectLightHouseAddr(myVpnIpNet[0].Addr(), myUdpAddr)
r.Log("Assert another tunnel between me and them works")
assertTunnel(t, myVpnIpNet[0].Addr(), theirVpnIpNet[0].Addr(), myControl, theirControl, r)
hi := myControl.GetHostInfoByVpnAddr(theirVpnIpNet[0].Addr(), false)
if hi == nil {
t.Fatal("There is no hostinfo for this tunnel")
}
myHi := theirControl.GetHostInfoByVpnAddr(myVpnIpNet[0].Addr(), false)
if myHi == nil {
t.Fatal("There is no hostinfo for my tunnel")
}
r.Log("It does")
buf := make([]byte, 1024)
hdr := header.H{
Version: 1,
Type: header.CloseTunnel,
Subtype: 0,
Reserved: 0,
RemoteIndex: hi.RemoteIndex,
MessageCounter: 5,
}
out, err := hdr.Encode(buf)
if err != nil {
t.Fatal(err)
}
pkt := &udp.Packet{
To: hi.CurrentRemote,
From: myHi.CurrentRemote,
Data: out,
}
r.InjectUDPPacket(myControl, theirControl, pkt)
r.Log("Injected bogus close tunnel. Let's see!")
waitStart = time.Now()
for {
myIndexes := len(myControl.GetHostmap().Indexes)
theirIndexes := len(theirControl.GetHostmap().Indexes)
if myIndexes == 0 {
t.Fatal("myIndexes should not be 0")
}
if theirIndexes == 0 {
t.Fatal("theirIndexes should not be 0, they should have rejected this bogus packet")
}
since := time.Since(waitStart)
r.Logf("my tunnels: %v; their tunnels: %v; duration: %v", myIndexes, theirIndexes, since)
if since > time.Second*4 {
t.Log("The tunnel would have been gone by now")
break
}
time.Sleep(1 * time.Second)
r.FlushAll()
}
myControl.Stop()
theirControl.Stop()
}
+9 -1
View File
@@ -342,6 +342,14 @@ logging:
# after receiving the response for lighthouse queries # after receiving the response for lighthouse queries
#trigger_buffer: 64 #trigger_buffer: 64
# max_rate limits the number of new inbound handshakes per second. Once the limit is reached,
# new handshakes are dropped until the next second. A value of 0 means unlimited (default).
# This is useful for preventing DoS attacks that attempt to exhaust CPU with handshake crypto.
# Running `openssl speed ecdhp256` on your hardware can be a good rule of thumb for choosing
# a max, as each handshake performs similar DH operations. Note that this benchmarks a single
# core, so you may wish to scale the value by the number of `routines` configured.
#max_rate: 0
# Tunnel manager settings # Tunnel manager settings
#tunnels: #tunnels:
# drop_inactive controls whether inactive tunnels are maintained or dropped after the inactive_timeout period has # drop_inactive controls whether inactive tunnels are maintained or dropped after the inactive_timeout period has
@@ -382,8 +390,8 @@ firewall:
# Rules are comprised of a protocol, port, and one or more of host, group, or CIDR # Rules are comprised of a protocol, port, and one or more of host, group, or CIDR
# Logical evaluation is roughly: port AND proto AND (ca_sha OR ca_name) AND (host OR group OR groups OR cidr) AND (local cidr) # Logical evaluation is roughly: port AND proto AND (ca_sha OR ca_name) AND (host OR group OR groups OR cidr) AND (local cidr)
# - port: Takes `0` or `any` as any, a single number `80`, a range `200-901`, or `fragment` to match second and further fragments of fragmented packets (since there is no port available). # - port: Takes `0` or `any` as any, a single number `80`, a range `200-901`, or `fragment` to match second and further fragments of fragmented packets (since there is no port available).
# code: same as port but makes more sense when talking about ICMP, TODO: this is not currently implemented in a way that works, use `any`
# proto: `any`, `tcp`, `udp`, or `icmp` # proto: `any`, `tcp`, `udp`, or `icmp`
# a port specification is ignored if proto is `icmp`
# host: `any` or a literal hostname, ie `test-host` # host: `any` or a literal hostname, ie `test-host`
# group: `any` or a literal group name, ie `default-group` # group: `any` or a literal group name, ie `default-group`
# groups: Same as group but accepts a list of values. Multiple values are AND'd together and a certificate would have to contain all groups to pass # groups: Same as group but accepts a list of values. Multiple values are AND'd together and a certificate would have to contain all groups to pass
+84 -64
View File
@@ -230,7 +230,7 @@ func NewFirewallFromConfig(l *logrus.Logger, cs *CertState, c *config.C) (*Firew
case "drop": case "drop":
fw.OutSendReject = false fw.OutSendReject = false
default: default:
l.WithField("action", inboundAction).Warn("invalid firewall.outbound_action, defaulting to `drop`") l.WithField("action", outboundAction).Warn("invalid firewall.outbound_action, defaulting to `drop`")
fw.OutSendReject = false fw.OutSendReject = false
} }
@@ -249,20 +249,6 @@ func NewFirewallFromConfig(l *logrus.Logger, cs *CertState, c *config.C) (*Firew
// AddRule properly creates the in memory rule structure for a firewall table. // AddRule properly creates the in memory rule structure for a firewall table.
func (f *Firewall) AddRule(incoming bool, proto uint8, startPort int32, endPort int32, groups []string, host string, cidr, localCidr, caName string, caSha string) error { func (f *Firewall) AddRule(incoming bool, proto uint8, startPort int32, endPort int32, groups []string, host string, cidr, localCidr, caName string, caSha string) error {
// We need this rule string because we generate a hash. Removing this will break firewall reload.
ruleString := fmt.Sprintf(
"incoming: %v, proto: %v, startPort: %v, endPort: %v, groups: %v, host: %v, ip: %v, localIp: %v, caName: %v, caSha: %s",
incoming, proto, startPort, endPort, groups, host, cidr, localCidr, caName, caSha,
)
f.rules += ruleString + "\n"
direction := "incoming"
if !incoming {
direction = "outgoing"
}
f.l.WithField("firewallRule", m{"direction": direction, "proto": proto, "startPort": startPort, "endPort": endPort, "groups": groups, "host": host, "cidr": cidr, "localCidr": localCidr, "caName": caName, "caSha": caSha}).
Info("Firewall rule added")
var ( var (
ft *FirewallTable ft *FirewallTable
fp firewallPort fp firewallPort
@@ -280,6 +266,12 @@ func (f *Firewall) AddRule(incoming bool, proto uint8, startPort int32, endPort
case firewall.ProtoUDP: case firewall.ProtoUDP:
fp = ft.UDP fp = ft.UDP
case firewall.ProtoICMP, firewall.ProtoICMPv6: case firewall.ProtoICMP, firewall.ProtoICMPv6:
//ICMP traffic doesn't have ports, so we always coerce to "any", even if a value is provided
if startPort != firewall.PortAny {
f.l.WithField("startPort", startPort).Warn("ignoring port specification for ICMP firewall rule")
}
startPort = firewall.PortAny
endPort = firewall.PortAny
fp = ft.ICMP fp = ft.ICMP
case firewall.ProtoAny: case firewall.ProtoAny:
fp = ft.AnyProto fp = ft.AnyProto
@@ -287,6 +279,20 @@ func (f *Firewall) AddRule(incoming bool, proto uint8, startPort int32, endPort
return fmt.Errorf("unknown protocol %v", proto) return fmt.Errorf("unknown protocol %v", proto)
} }
// We need this rule string because we generate a hash. Removing this will break firewall reload.
ruleString := fmt.Sprintf(
"incoming: %v, proto: %v, startPort: %v, endPort: %v, groups: %v, host: %v, ip: %v, localIp: %v, caName: %v, caSha: %s",
incoming, proto, startPort, endPort, groups, host, cidr, localCidr, caName, caSha,
)
f.rules += ruleString + "\n"
direction := "incoming"
if !incoming {
direction = "outgoing"
}
f.l.WithField("firewallRule", m{"direction": direction, "proto": proto, "startPort": startPort, "endPort": endPort, "groups": groups, "host": host, "cidr": cidr, "localCidr": localCidr, "caName": caName, "caSha": caSha}).
Info("Firewall rule added")
return fp.addRule(f, startPort, endPort, groups, host, cidr, localCidr, caName, caSha) return fp.addRule(f, startPort, endPort, groups, host, cidr, localCidr, caName, caSha)
} }
@@ -349,24 +355,31 @@ func AddFirewallRulesFromConfig(l *logrus.Logger, inbound bool, c *config.C, fw
sPort = r.Port sPort = r.Port
} }
startPort, endPort, err := parsePort(sPort)
if err != nil {
return fmt.Errorf("%s rule #%v; %s %s", table, i, errPort, err)
}
var proto uint8 var proto uint8
var startPort, endPort int32
switch r.Proto { switch r.Proto {
case "any": case "any":
proto = firewall.ProtoAny proto = firewall.ProtoAny
startPort, endPort, err = parsePort(sPort)
case "tcp": case "tcp":
proto = firewall.ProtoTCP proto = firewall.ProtoTCP
startPort, endPort, err = parsePort(sPort)
case "udp": case "udp":
proto = firewall.ProtoUDP proto = firewall.ProtoUDP
startPort, endPort, err = parsePort(sPort)
case "icmp": case "icmp":
proto = firewall.ProtoICMP proto = firewall.ProtoICMP
startPort = firewall.PortAny
endPort = firewall.PortAny
if sPort != "" {
l.WithField("port", sPort).Warn("ignoring port specification for ICMP firewall rule")
}
default: default:
return fmt.Errorf("%s rule #%v; proto was not understood; `%s`", table, i, r.Proto) return fmt.Errorf("%s rule #%v; proto was not understood; `%s`", table, i, r.Proto)
} }
if err != nil {
return fmt.Errorf("%s rule #%v; %s %s", table, i, errPort, err)
}
if r.Cidr != "" && r.Cidr != "any" { if r.Cidr != "" && r.Cidr != "any" {
_, err = netip.ParsePrefix(r.Cidr) _, err = netip.ParsePrefix(r.Cidr)
@@ -467,7 +480,7 @@ func (f *Firewall) metrics(incoming bool) firewallMetrics {
} }
} }
// Destroy cleans up any known cyclical references so the object can be free'd my GC. This should be called if a new // Destroy cleans up any known cyclical references so the object can be freed by GC. This should be called if a new
// firewall object is created // firewall object is created
func (f *Firewall) Destroy() { func (f *Firewall) Destroy() {
//TODO: clean references if/when needed //TODO: clean references if/when needed
@@ -660,6 +673,13 @@ func (fp firewallPort) match(p firewall.Packet, incoming bool, c *cert.CachedCer
return false return false
} }
// this branch is here to catch traffic from FirewallTable.Any.match and FirewallTable.ICMP.match
if p.Protocol == firewall.ProtoICMP || p.Protocol == firewall.ProtoICMPv6 {
// port numbers are re-used for connection tracking of ICMP,
// but we don't want to actually filter on them.
return fp[firewall.PortAny].match(p, c, caPool)
}
var port int32 var port int32
if p.Fragment { if p.Fragment {
@@ -804,10 +824,8 @@ func (fr *FirewallRule) isAny(groups []string, host string, cidr string) bool {
return true return true
} }
for _, group := range groups { if slices.Contains(groups, "any") {
if group == "any" { return true
return true
}
} }
if host == "any" { if host == "any" {
@@ -1018,54 +1036,56 @@ func (r *rule) sanity() error {
} }
} }
if r.Code != "" {
return fmt.Errorf("code specified as [%s]. Support for 'code' will be dropped in a future release, as it has never been functional", r.Code)
}
//todo alert on cidr-any //todo alert on cidr-any
return nil return nil
} }
func parsePort(s string) (startPort, endPort int32, err error) { func parsePort(s string) (int32, int32, error) {
var err error
const notAPort int32 = -2
if s == "any" { if s == "any" {
startPort = firewall.PortAny return firewall.PortAny, firewall.PortAny, nil
endPort = firewall.PortAny }
if s == "fragment" {
} else if s == "fragment" { return firewall.PortFragment, firewall.PortFragment, nil
startPort = firewall.PortFragment }
endPort = firewall.PortFragment if !strings.Contains(s, `-`) {
} else if strings.Contains(s, `-`) {
sPorts := strings.SplitN(s, `-`, 2)
sPorts[0] = strings.Trim(sPorts[0], " ")
sPorts[1] = strings.Trim(sPorts[1], " ")
if len(sPorts) != 2 || sPorts[0] == "" || sPorts[1] == "" {
return 0, 0, fmt.Errorf("appears to be a range but could not be parsed; `%s`", s)
}
rStartPort, err := strconv.Atoi(sPorts[0])
if err != nil {
return 0, 0, fmt.Errorf("beginning range was not a number; `%s`", sPorts[0])
}
rEndPort, err := strconv.Atoi(sPorts[1])
if err != nil {
return 0, 0, fmt.Errorf("ending range was not a number; `%s`", sPorts[1])
}
startPort = int32(rStartPort)
endPort = int32(rEndPort)
if startPort == firewall.PortAny {
endPort = firewall.PortAny
}
} else {
rPort, err := strconv.Atoi(s) rPort, err := strconv.Atoi(s)
if err != nil { if err != nil {
return 0, 0, fmt.Errorf("was not a number; `%s`", s) return notAPort, notAPort, fmt.Errorf("was not a number; `%s`", s)
} }
startPort = int32(rPort) return int32(rPort), int32(rPort), nil
endPort = startPort
} }
return sPorts := strings.SplitN(s, `-`, 2)
for i := range sPorts {
sPorts[i] = strings.Trim(sPorts[i], " ")
}
if len(sPorts) != 2 || sPorts[0] == "" || sPorts[1] == "" {
return notAPort, notAPort, fmt.Errorf("appears to be a range but could not be parsed; `%s`", s)
}
rStartPort, err := strconv.Atoi(sPorts[0])
if err != nil {
return notAPort, notAPort, fmt.Errorf("beginning range was not a number; `%s`", sPorts[0])
}
rEndPort, err := strconv.Atoi(sPorts[1])
if err != nil {
return notAPort, notAPort, fmt.Errorf("ending range was not a number; `%s`", sPorts[1])
}
startPort := int32(rStartPort)
endPort := int32(rEndPort)
if startPort == firewall.PortAny {
endPort = firewall.PortAny
}
return startPort, endPort, nil
} }
+6 -1
View File
@@ -22,7 +22,10 @@ const (
type Packet struct { type Packet struct {
LocalAddr netip.Addr LocalAddr netip.Addr
RemoteAddr netip.Addr RemoteAddr netip.Addr
LocalPort uint16 // LocalPort is the destination port for incoming traffic, or the source port for outgoing. Zero for ICMP.
LocalPort uint16
// RemotePort is the source port for incoming traffic, or the destination port for outgoing.
// For ICMP, it's the "identifier". This is only used for connection tracking, actual firewall rules will not filter on ICMP identifier
RemotePort uint16 RemotePort uint16
Protocol uint8 Protocol uint8
Fragment bool Fragment bool
@@ -46,6 +49,8 @@ func (fp Packet) MarshalJSON() ([]byte, error) {
proto = "tcp" proto = "tcp"
case ProtoICMP: case ProtoICMP:
proto = "icmp" proto = "icmp"
case ProtoICMPv6:
proto = "icmpv6"
case ProtoUDP: case ProtoUDP:
proto = "udp" proto = "udp"
default: default:
+158 -6
View File
@@ -87,9 +87,10 @@ func TestFirewall_AddRule(t *testing.T) {
fw = NewFirewall(l, time.Second, time.Minute, time.Hour, c) fw = NewFirewall(l, time.Second, time.Minute, time.Hour, c)
require.NoError(t, fw.AddRule(true, firewall.ProtoICMP, 1, 1, []string{}, "h1", "", "", "", "")) require.NoError(t, fw.AddRule(true, firewall.ProtoICMP, 1, 1, []string{}, "h1", "", "", "", ""))
assert.Nil(t, fw.InRules.ICMP[1].Any.Any) //no matter what port is given for icmp, it should end up as "any"
assert.Empty(t, fw.InRules.ICMP[1].Any.Groups) assert.Nil(t, fw.InRules.ICMP[firewall.PortAny].Any.Any)
assert.Contains(t, fw.InRules.ICMP[1].Any.Hosts, "h1") assert.Empty(t, fw.InRules.ICMP[firewall.PortAny].Any.Groups)
assert.Contains(t, fw.InRules.ICMP[firewall.PortAny].Any.Hosts, "h1")
fw = NewFirewall(l, time.Second, time.Minute, time.Hour, c) fw = NewFirewall(l, time.Second, time.Minute, time.Hour, c)
require.NoError(t, fw.AddRule(false, firewall.ProtoAny, 1, 1, []string{}, "", ti.String(), "", "", "")) require.NoError(t, fw.AddRule(false, firewall.ProtoAny, 1, 1, []string{}, "", ti.String(), "", "", ""))
@@ -734,6 +735,150 @@ func TestFirewall_DropConntrackReload(t *testing.T) {
assert.Equal(t, fw.Drop(p, false, &h, cp, nil), ErrNoMatchingRule) assert.Equal(t, fw.Drop(p, false, &h, cp, nil), ErrNoMatchingRule)
} }
func TestFirewall_ICMPPortBehavior(t *testing.T) {
l := test.NewLogger()
ob := &bytes.Buffer{}
l.SetOutput(ob)
myVpnNetworksTable := new(bart.Lite)
myVpnNetworksTable.Insert(netip.MustParsePrefix("1.1.1.1/8"))
network := netip.MustParsePrefix("1.2.3.4/24")
c := cert.CachedCertificate{
Certificate: &dummyCert{
name: "host1",
networks: []netip.Prefix{network},
groups: []string{"default-group"},
issuer: "signer-shasum",
},
InvertedGroups: map[string]struct{}{"default-group": {}},
}
h := HostInfo{
ConnectionState: &ConnectionState{
peerCert: &c,
},
vpnAddrs: []netip.Addr{network.Addr()},
}
h.buildNetworks(myVpnNetworksTable, c.Certificate)
cp := cert.NewCAPool()
templ := firewall.Packet{
LocalAddr: netip.MustParseAddr("1.2.3.4"),
RemoteAddr: netip.MustParseAddr("1.2.3.4"),
Protocol: firewall.ProtoICMP,
Fragment: false,
}
t.Run("ICMP allowed", func(t *testing.T) {
fw := NewFirewall(l, time.Second, time.Minute, time.Hour, c.Certificate)
require.NoError(t, fw.AddRule(true, firewall.ProtoICMP, 0, 0, []string{"any"}, "", "", "", "", ""))
t.Run("zero ports", func(t *testing.T) {
p := templ.Copy()
p.LocalPort = 0
p.RemotePort = 0
// Drop outbound
assert.Equal(t, fw.Drop(*p, false, &h, cp, nil), ErrNoMatchingRule)
// Allow inbound
resetConntrack(fw)
require.NoError(t, fw.Drop(*p, true, &h, cp, nil))
//now also allow outbound
require.NoError(t, fw.Drop(*p, false, &h, cp, nil))
})
t.Run("nonzero ports", func(t *testing.T) {
p := templ.Copy()
p.LocalPort = 0xabcd
p.RemotePort = 0x1234
// Drop outbound
assert.Equal(t, fw.Drop(*p, false, &h, cp, nil), ErrNoMatchingRule)
// Allow inbound
resetConntrack(fw)
require.NoError(t, fw.Drop(*p, true, &h, cp, nil))
//now also allow outbound
require.NoError(t, fw.Drop(*p, false, &h, cp, nil))
})
})
t.Run("Any proto, some ports allowed", func(t *testing.T) {
fw := NewFirewall(l, time.Second, time.Minute, time.Hour, c.Certificate)
require.NoError(t, fw.AddRule(true, firewall.ProtoAny, 80, 444, []string{"any"}, "", "", "", "", ""))
t.Run("zero ports, still blocked", func(t *testing.T) {
p := templ.Copy()
p.LocalPort = 0
p.RemotePort = 0
// Drop outbound
assert.Equal(t, fw.Drop(*p, false, &h, cp, nil), ErrNoMatchingRule)
// Allow inbound
resetConntrack(fw)
assert.Equal(t, fw.Drop(*p, true, &h, cp, nil), ErrNoMatchingRule)
//now also allow outbound
assert.Equal(t, fw.Drop(*p, false, &h, cp, nil), ErrNoMatchingRule)
})
t.Run("nonzero ports, still blocked", func(t *testing.T) {
p := templ.Copy()
p.LocalPort = 0xabcd
p.RemotePort = 0x1234
// Drop outbound
assert.Equal(t, fw.Drop(*p, false, &h, cp, nil), ErrNoMatchingRule)
// Allow inbound
resetConntrack(fw)
assert.Equal(t, fw.Drop(*p, true, &h, cp, nil), ErrNoMatchingRule)
//now also allow outbound
assert.Equal(t, fw.Drop(*p, false, &h, cp, nil), ErrNoMatchingRule)
})
t.Run("nonzero, matching ports, still blocked", func(t *testing.T) {
p := templ.Copy()
p.LocalPort = 80
p.RemotePort = 80
// Drop outbound
assert.Equal(t, fw.Drop(*p, false, &h, cp, nil), ErrNoMatchingRule)
// Allow inbound
resetConntrack(fw)
assert.Equal(t, fw.Drop(*p, true, &h, cp, nil), ErrNoMatchingRule)
//now also allow outbound
assert.Equal(t, fw.Drop(*p, false, &h, cp, nil), ErrNoMatchingRule)
})
})
t.Run("Any proto, any port", func(t *testing.T) {
fw := NewFirewall(l, time.Second, time.Minute, time.Hour, c.Certificate)
require.NoError(t, fw.AddRule(true, firewall.ProtoAny, 0, 0, []string{"any"}, "", "", "", "", ""))
t.Run("zero ports, allowed", func(t *testing.T) {
resetConntrack(fw)
p := templ.Copy()
p.LocalPort = 0
p.RemotePort = 0
// Drop outbound
assert.Equal(t, fw.Drop(*p, false, &h, cp, nil), ErrNoMatchingRule)
// Allow inbound
resetConntrack(fw)
require.NoError(t, fw.Drop(*p, true, &h, cp, nil))
//now also allow outbound
require.NoError(t, fw.Drop(*p, false, &h, cp, nil))
})
t.Run("nonzero ports, allowed", func(t *testing.T) {
resetConntrack(fw)
p := templ.Copy()
p.LocalPort = 0xabcd
p.RemotePort = 0x1234
// Drop outbound
assert.Equal(t, fw.Drop(*p, false, &h, cp, nil), ErrNoMatchingRule)
// Allow inbound
resetConntrack(fw)
require.NoError(t, fw.Drop(*p, true, &h, cp, nil))
//now also allow outbound
require.NoError(t, fw.Drop(*p, false, &h, cp, nil))
//different ID is blocked
p.RemotePort++
require.Equal(t, fw.Drop(*p, false, &h, cp, nil), ErrNoMatchingRule)
})
})
}
func TestFirewall_DropIPSpoofing(t *testing.T) { func TestFirewall_DropIPSpoofing(t *testing.T) {
l := test.NewLogger() l := test.NewLogger()
ob := &bytes.Buffer{} ob := &bytes.Buffer{}
@@ -919,11 +1064,11 @@ func TestNewFirewallFromConfig(t *testing.T) {
// Test code/port error // Test code/port error
conf = config.NewC(l) conf = config.NewC(l)
conf.Settings["firewall"] = map[string]any{"outbound": []any{map[string]any{"code": "a", "host": "testh"}}} conf.Settings["firewall"] = map[string]any{"outbound": []any{map[string]any{"code": "a", "host": "testh", "proto": "any"}}}
_, err = NewFirewallFromConfig(l, cs, conf) _, err = NewFirewallFromConfig(l, cs, conf)
require.EqualError(t, err, "firewall.outbound rule #0; code was not a number; `a`") require.EqualError(t, err, "firewall.outbound rule #0; code was not a number; `a`")
conf.Settings["firewall"] = map[string]any{"outbound": []any{map[string]any{"port": "a", "host": "testh"}}} conf.Settings["firewall"] = map[string]any{"outbound": []any{map[string]any{"port": "a", "host": "testh", "proto": "any"}}}
_, err = NewFirewallFromConfig(l, cs, conf) _, err = NewFirewallFromConfig(l, cs, conf)
require.EqualError(t, err, "firewall.outbound rule #0; port was not a number; `a`") require.EqualError(t, err, "firewall.outbound rule #0; port was not a number; `a`")
@@ -973,7 +1118,14 @@ func TestAddFirewallRulesFromConfig(t *testing.T) {
mf = &mockFirewall{} mf = &mockFirewall{}
conf.Settings["firewall"] = map[string]any{"outbound": []any{map[string]any{"port": "1", "proto": "icmp", "host": "a"}}} conf.Settings["firewall"] = map[string]any{"outbound": []any{map[string]any{"port": "1", "proto": "icmp", "host": "a"}}}
require.NoError(t, AddFirewallRulesFromConfig(l, false, conf, mf)) require.NoError(t, AddFirewallRulesFromConfig(l, false, conf, mf))
assert.Equal(t, addRuleCall{incoming: false, proto: firewall.ProtoICMP, startPort: 1, endPort: 1, groups: nil, host: "a", ip: "", localIp: ""}, mf.lastCall) assert.Equal(t, addRuleCall{incoming: false, proto: firewall.ProtoICMP, startPort: firewall.PortAny, endPort: firewall.PortAny, groups: nil, host: "a", ip: "", localIp: ""}, mf.lastCall)
// Test adding icmp rule no port
conf = config.NewC(l)
mf = &mockFirewall{}
conf.Settings["firewall"] = map[string]any{"outbound": []any{map[string]any{"proto": "icmp", "host": "a"}}}
require.NoError(t, AddFirewallRulesFromConfig(l, false, conf, mf))
assert.Equal(t, addRuleCall{incoming: false, proto: firewall.ProtoICMP, startPort: firewall.PortAny, endPort: firewall.PortAny, groups: nil, host: "a", ip: "", localIp: ""}, mf.lastCall)
// Test adding any rule // Test adding any rule
conf = config.NewC(l) conf = config.NewC(l)
+2 -1
View File
@@ -4,6 +4,7 @@ go 1.25
require ( require (
dario.cat/mergo v1.0.2 dario.cat/mergo v1.0.2
filippo.io/bigmod v0.1.0
github.com/anmitsu/go-shlex v0.0.0-20200514113438-38f4b401e2be github.com/anmitsu/go-shlex v0.0.0-20200514113438-38f4b401e2be
github.com/armon/go-radix v1.0.0 github.com/armon/go-radix v1.0.0
github.com/cyberdelia/go-metrics-graphite v0.0.0-20161219230853-39f87cc3b432 github.com/cyberdelia/go-metrics-graphite v0.0.0-20161219230853-39f87cc3b432
@@ -17,7 +18,7 @@ require (
github.com/nbrownus/go-metrics-prometheus v0.0.0-20210712211119-974a6260965f github.com/nbrownus/go-metrics-prometheus v0.0.0-20210712211119-974a6260965f
github.com/prometheus/client_golang v1.23.2 github.com/prometheus/client_golang v1.23.2
github.com/rcrowley/go-metrics v0.0.0-20201227073835-cf1acfcdf475 github.com/rcrowley/go-metrics v0.0.0-20201227073835-cf1acfcdf475
github.com/sirupsen/logrus v1.9.3 github.com/sirupsen/logrus v1.9.4
github.com/skip2/go-qrcode v0.0.0-20200617195104-da1b6568686e github.com/skip2/go-qrcode v0.0.0-20200617195104-da1b6568686e
github.com/stefanberger/go-pkcs11uri v0.0.0-20230803200340-78284954bff6 github.com/stefanberger/go-pkcs11uri v0.0.0-20230803200340-78284954bff6
github.com/stretchr/testify v1.11.1 github.com/stretchr/testify v1.11.1
+4 -3
View File
@@ -1,6 +1,8 @@
cloud.google.com/go v0.34.0/go.mod h1:aQUYkXzVsufM+DwF1aE+0xfcU+56JwCaLick0ClmMTw= cloud.google.com/go v0.34.0/go.mod h1:aQUYkXzVsufM+DwF1aE+0xfcU+56JwCaLick0ClmMTw=
dario.cat/mergo v1.0.2 h1:85+piFYR1tMbRrLcDwR18y4UKJ3aH1Tbzi24VRW1TK8= dario.cat/mergo v1.0.2 h1:85+piFYR1tMbRrLcDwR18y4UKJ3aH1Tbzi24VRW1TK8=
dario.cat/mergo v1.0.2/go.mod h1:E/hbnu0NxMFBjpMIE34DRGLWqDy0g5FuKDhCb31ngxA= dario.cat/mergo v1.0.2/go.mod h1:E/hbnu0NxMFBjpMIE34DRGLWqDy0g5FuKDhCb31ngxA=
filippo.io/bigmod v0.1.0 h1:UNzDk7y9ADKST+axd9skUpBQeW7fG2KrTZyOE4uGQy8=
filippo.io/bigmod v0.1.0/go.mod h1:OjOXDNlClLblvXdwgFFOQFJEocLhhtai8vGLy0JCZlI=
github.com/alecthomas/template v0.0.0-20160405071501-a0175ee3bccc/go.mod h1:LOuyumcjzFXgccqObfd/Ljyb9UuFJ6TxHnclSeseNhc= github.com/alecthomas/template v0.0.0-20160405071501-a0175ee3bccc/go.mod h1:LOuyumcjzFXgccqObfd/Ljyb9UuFJ6TxHnclSeseNhc=
github.com/alecthomas/template v0.0.0-20190718012654-fb15b899a751/go.mod h1:LOuyumcjzFXgccqObfd/Ljyb9UuFJ6TxHnclSeseNhc= github.com/alecthomas/template v0.0.0-20190718012654-fb15b899a751/go.mod h1:LOuyumcjzFXgccqObfd/Ljyb9UuFJ6TxHnclSeseNhc=
github.com/alecthomas/units v0.0.0-20151022065526-2efee857e7cf/go.mod h1:ybxpYRFXyAe+OPACYpWeL0wqObRcbAqCMya13uyzqw0= github.com/alecthomas/units v0.0.0-20151022065526-2efee857e7cf/go.mod h1:ybxpYRFXyAe+OPACYpWeL0wqObRcbAqCMya13uyzqw0=
@@ -131,8 +133,8 @@ github.com/rogpeppe/go-internal v1.10.0/go.mod h1:UQnix2H7Ngw/k4C5ijL5+65zddjncj
github.com/sirupsen/logrus v1.2.0/go.mod h1:LxeOpSwHxABJmUn/MG1IvRgCAasNZTLOkJPxbbu5VWo= github.com/sirupsen/logrus v1.2.0/go.mod h1:LxeOpSwHxABJmUn/MG1IvRgCAasNZTLOkJPxbbu5VWo=
github.com/sirupsen/logrus v1.4.2/go.mod h1:tLMulIdttU9McNUspp0xgXVQah82FyeX6MwdIuYE2rE= github.com/sirupsen/logrus v1.4.2/go.mod h1:tLMulIdttU9McNUspp0xgXVQah82FyeX6MwdIuYE2rE=
github.com/sirupsen/logrus v1.6.0/go.mod h1:7uNnSEd1DgxDLC74fIahvMZmmYsHGZGEOFrfsX/uA88= github.com/sirupsen/logrus v1.6.0/go.mod h1:7uNnSEd1DgxDLC74fIahvMZmmYsHGZGEOFrfsX/uA88=
github.com/sirupsen/logrus v1.9.3 h1:dueUQJ1C2q9oE3F7wvmSGAaVtTmUizReu6fjN8uqzbQ= github.com/sirupsen/logrus v1.9.4 h1:TsZE7l11zFCLZnZ+teH4Umoq5BhEIfIzfRDZ1Uzql2w=
github.com/sirupsen/logrus v1.9.3/go.mod h1:naHLuLoDiP4jHNo9R0sCBMtWGeIprob74mVsIT4qYEQ= github.com/sirupsen/logrus v1.9.4/go.mod h1:ftWc9WdOfJ0a92nsE2jF5u5ZwH8Bv2zdeOC42RjbV2g=
github.com/skip2/go-qrcode v0.0.0-20200617195104-da1b6568686e h1:MRM5ITcdelLK2j1vwZ3Je0FKVCfqOLp5zO6trqMLYs0= github.com/skip2/go-qrcode v0.0.0-20200617195104-da1b6568686e h1:MRM5ITcdelLK2j1vwZ3Je0FKVCfqOLp5zO6trqMLYs0=
github.com/skip2/go-qrcode v0.0.0-20200617195104-da1b6568686e/go.mod h1:XV66xRDqSt+GTGFMVlhk3ULuV0y9ZmzeVGR4mloJI3M= github.com/skip2/go-qrcode v0.0.0-20200617195104-da1b6568686e/go.mod h1:XV66xRDqSt+GTGFMVlhk3ULuV0y9ZmzeVGR4mloJI3M=
github.com/stefanberger/go-pkcs11uri v0.0.0-20230803200340-78284954bff6 h1:pnnLyeX7o/5aX8qUQ69P/mLojDqwda8hFOCBTmP/6hw= github.com/stefanberger/go-pkcs11uri v0.0.0-20230803200340-78284954bff6 h1:pnnLyeX7o/5aX8qUQ69P/mLojDqwda8hFOCBTmP/6hw=
@@ -206,7 +208,6 @@ golang.org/x/sys v0.0.0-20200930185726-fdedc70b468f/go.mod h1:h1NjWce9XRLGQEsW7w
golang.org/x/sys v0.0.0-20201119102817-f84b799fce68/go.mod h1:h1NjWce9XRLGQEsW7wpKNCjG9DtNlClVuFLEZdDNbEs= golang.org/x/sys v0.0.0-20201119102817-f84b799fce68/go.mod h1:h1NjWce9XRLGQEsW7wpKNCjG9DtNlClVuFLEZdDNbEs=
golang.org/x/sys v0.0.0-20210124154548-22da62e12c0c/go.mod h1:h1NjWce9XRLGQEsW7wpKNCjG9DtNlClVuFLEZdDNbEs= golang.org/x/sys v0.0.0-20210124154548-22da62e12c0c/go.mod h1:h1NjWce9XRLGQEsW7wpKNCjG9DtNlClVuFLEZdDNbEs=
golang.org/x/sys v0.0.0-20210603081109-ebe580a85c40/go.mod h1:oPkhp1MJrh7nUepCBck5+mAzfO9JrbApNNgaTdGDITg= golang.org/x/sys v0.0.0-20210603081109-ebe580a85c40/go.mod h1:oPkhp1MJrh7nUepCBck5+mAzfO9JrbApNNgaTdGDITg=
golang.org/x/sys v0.0.0-20220715151400-c0bba94af5f8/go.mod h1:oPkhp1MJrh7nUepCBck5+mAzfO9JrbApNNgaTdGDITg=
golang.org/x/sys v0.2.0/go.mod h1:oPkhp1MJrh7nUepCBck5+mAzfO9JrbApNNgaTdGDITg= golang.org/x/sys v0.2.0/go.mod h1:oPkhp1MJrh7nUepCBck5+mAzfO9JrbApNNgaTdGDITg=
golang.org/x/sys v0.10.0/go.mod h1:oPkhp1MJrh7nUepCBck5+mAzfO9JrbApNNgaTdGDITg= golang.org/x/sys v0.10.0/go.mod h1:oPkhp1MJrh7nUepCBck5+mAzfO9JrbApNNgaTdGDITg=
golang.org/x/sys v0.40.0 h1:DBZZqJ2Rkml6QMQsZywtnjnnGvHza6BTfYFWY9kjEWQ= golang.org/x/sys v0.40.0 h1:DBZZqJ2Rkml6QMQsZywtnjnnGvHza6BTfYFWY9kjEWQ=
+58 -9
View File
@@ -23,22 +23,25 @@ const (
DefaultHandshakeRetries = 10 DefaultHandshakeRetries = 10
DefaultHandshakeTriggerBuffer = 64 DefaultHandshakeTriggerBuffer = 64
DefaultUseRelays = true DefaultUseRelays = true
DefaultMaxHandshakeRate = 0 // 0 means unlimited
) )
var ( var (
defaultHandshakeConfig = HandshakeConfig{ defaultHandshakeConfig = HandshakeConfig{
tryInterval: DefaultHandshakeTryInterval, tryInterval: DefaultHandshakeTryInterval,
retries: DefaultHandshakeRetries, retries: DefaultHandshakeRetries,
triggerBuffer: DefaultHandshakeTriggerBuffer, triggerBuffer: DefaultHandshakeTriggerBuffer,
useRelays: DefaultUseRelays, useRelays: DefaultUseRelays,
maxHandshakeRate: DefaultMaxHandshakeRate,
} }
) )
type HandshakeConfig struct { type HandshakeConfig struct {
tryInterval time.Duration tryInterval time.Duration
retries int64 retries int64
triggerBuffer int triggerBuffer int
useRelays bool useRelays bool
maxHandshakeRate int
messageMetrics *MessageMetrics messageMetrics *MessageMetrics
} }
@@ -58,9 +61,15 @@ type HandshakeManager struct {
messageMetrics *MessageMetrics messageMetrics *MessageMetrics
metricInitiated metrics.Counter metricInitiated metrics.Counter
metricTimedOut metrics.Counter metricTimedOut metrics.Counter
metricRateLimited metrics.Counter
f *Interface f *Interface
l *logrus.Logger l *logrus.Logger
// Rate limiting for new handshakes (token bucket)
rateBucket int // tokens currently available
rateMax int // max tokens (== max handshakes per second), 0 means unlimited
rateLastTick time.Time
// can be used to trigger outbound handshake for the given vpnIp // can be used to trigger outbound handshake for the given vpnIp
trigger chan netip.Addr trigger chan netip.Addr
} }
@@ -116,10 +125,41 @@ func NewHandshakeManager(l *logrus.Logger, mainHostMap *HostMap, lightHouse *Lig
messageMetrics: config.messageMetrics, messageMetrics: config.messageMetrics,
metricInitiated: metrics.GetOrRegisterCounter("handshake_manager.initiated", nil), metricInitiated: metrics.GetOrRegisterCounter("handshake_manager.initiated", nil),
metricTimedOut: metrics.GetOrRegisterCounter("handshake_manager.timed_out", nil), metricTimedOut: metrics.GetOrRegisterCounter("handshake_manager.timed_out", nil),
metricRateLimited: metrics.GetOrRegisterCounter("handshake_manager.rate_limited", nil),
rateBucket: config.maxHandshakeRate,
rateMax: config.maxHandshakeRate,
rateLastTick: time.Now(),
l: l, l: l,
} }
} }
// handshakeRateAllow checks the token bucket rate limiter and returns true if a
// new handshake is allowed. Must be called with hm.Lock held.
func (hm *HandshakeManager) handshakeRateAllow(now time.Time) bool {
if hm.rateMax == 0 {
return true
}
// Refill tokens based on elapsed time
elapsed := now.Sub(hm.rateLastTick)
if elapsed >= time.Second {
// Add tokens for full seconds elapsed
tokens := int(elapsed/time.Second) * hm.rateMax
hm.rateBucket += tokens
if hm.rateBucket > hm.rateMax {
hm.rateBucket = hm.rateMax
}
hm.rateLastTick = now
}
if hm.rateBucket > 0 {
hm.rateBucket--
return true
}
return false
}
func (hm *HandshakeManager) Run(ctx context.Context) { func (hm *HandshakeManager) Run(ctx context.Context) {
clockSource := time.NewTicker(hm.config.tryInterval) clockSource := time.NewTicker(hm.config.tryInterval)
defer clockSource.Stop() defer clockSource.Stop()
@@ -149,6 +189,15 @@ func (hm *HandshakeManager) HandleIncoming(via ViaSender, packet []byte, h *head
case header.HandshakeIXPSK0: case header.HandshakeIXPSK0:
switch h.MessageCounter { switch h.MessageCounter {
case 1: case 1:
// Check rate limit for new incoming handshakes
hm.Lock()
allowed := hm.handshakeRateAllow(time.Now())
hm.Unlock()
if !allowed {
hm.metricRateLimited.Inc(1)
hm.l.WithField("from", via).Debug("Handshake rate limit reached, dropping incoming handshake")
return
}
ixHandshakeStage1(hm.f, via, packet, h) ixHandshakeStage1(hm.f, via, packet, h)
case 2: case 2:
@@ -590,7 +639,7 @@ func (hm *HandshakeManager) allocateIndex(hh *HandshakeHostInfo) error {
hm.Lock() hm.Lock()
defer hm.Unlock() defer hm.Unlock()
for i := 0; i < 32; i++ { for range 32 {
index, err := generateIndex(hm.l) index, err := generateIndex(hm.l)
if err != nil { if err != nil {
return err return err
+62
View File
@@ -65,6 +65,68 @@ func Test_NewHandshakeManagerVpnIp(t *testing.T) {
assert.NotContains(t, blah.vpnIps, ip) assert.NotContains(t, blah.vpnIps, ip)
} }
func Test_HandshakeManagerRateLimit(t *testing.T) {
l := test.NewLogger()
localrange := netip.MustParsePrefix("10.1.1.1/24")
preferredRanges := []netip.Prefix{localrange}
mainHM := newHostMap(l)
mainHM.preferredRanges.Store(&preferredRanges)
lh := newTestLighthouse()
config := defaultHandshakeConfig
config.maxHandshakeRate = 2
hm := NewHandshakeManager(l, mainHM, lh, &udp.NoopConn{}, config)
hm.f = &Interface{handshakeManager: hm, pki: &PKI{}, l: l}
now := time.Now()
// Should allow up to maxHandshakeRate handshakes
hm.Lock()
assert.True(t, hm.handshakeRateAllow(now), "first handshake should be allowed")
assert.True(t, hm.handshakeRateAllow(now), "second handshake should be allowed")
assert.False(t, hm.handshakeRateAllow(now), "third handshake should be rate limited")
hm.Unlock()
// After advancing time by 1 second, tokens should refill
hm.Lock()
assert.True(t, hm.handshakeRateAllow(now.Add(time.Second)), "handshake should be allowed after token refill")
hm.Unlock()
}
func Test_HandshakeManagerRateLimitUnlimited(t *testing.T) {
l := test.NewLogger()
localrange := netip.MustParsePrefix("10.1.1.1/24")
preferredRanges := []netip.Prefix{localrange}
mainHM := newHostMap(l)
mainHM.preferredRanges.Store(&preferredRanges)
lh := newTestLighthouse()
cs := &CertState{
initiatingVersion: cert.Version1,
privateKey: []byte{},
v1Cert: &dummyCert{version: cert.Version1},
v1HandshakeBytes: []byte{},
}
// Default config has maxHandshakeRate=0 (unlimited)
hm := NewHandshakeManager(l, mainHM, lh, &udp.NoopConn{}, defaultHandshakeConfig)
hm.f = &Interface{handshakeManager: hm, pki: &PKI{}, l: l}
hm.f.pki.cs.Store(cs)
// Should allow many handshakes with no limit
// Limited to 10 due to test lighthouse query channel buffer
for i := 0; i < 10; i++ {
ip := netip.MustParseAddr("172.1.1.1").As16()
ip[15] = byte(i + 1)
addr := netip.AddrFrom16(ip)
h := hm.StartHandshake(addr, nil)
assert.NotNil(t, h, "handshake %d should be allowed with unlimited rate", i)
}
}
func testCountTimerWheelEntries(tw *LockingTimerWheel[netip.Addr]) (c int) { func testCountTimerWheelEntries(tw *LockingTimerWheel[netip.Addr]) (c int) {
for _, i := range tw.t.wheel { for _, i := range tw.t.wheel {
n := i.Head n := i.Head
-1
View File
@@ -1,5 +1,4 @@
//go:build e2e_testing //go:build e2e_testing
// +build e2e_testing
package nebula package nebula
-1
View File
@@ -1,5 +1,4 @@
//go:build darwin || dragonfly || freebsd || netbsd || openbsd //go:build darwin || dragonfly || freebsd || netbsd || openbsd
// +build darwin dragonfly freebsd netbsd openbsd
package nebula package nebula
-1
View File
@@ -1,5 +1,4 @@
//go:build !darwin && !dragonfly && !freebsd && !netbsd && !openbsd //go:build !darwin && !dragonfly && !freebsd && !netbsd && !openbsd
// +build !darwin,!dragonfly,!freebsd,!netbsd,!openbsd
package nebula package nebula
+8
View File
@@ -490,6 +490,14 @@ func (f *Interface) Close() error {
f.l.WithError(err).Error("Error while closing udp socket") f.l.WithError(err).Error("Error while closing udp socket")
} }
} }
for i, r := range f.readers {
if i == 0 {
continue // f.readers[0] is f.inside, which we want to save for last
}
if err := r.Close(); err != nil {
f.l.WithError(err).Error("Error while closing tun reader")
}
}
// Release the tun device // Release the tun device
return f.inside.Close() return f.inside.Close()
+3 -10
View File
@@ -713,21 +713,14 @@ func (lh *LightHouse) unlockedShouldAddV6(vpnAddr netip.Addr, to *V6AddrPort) bo
func (lh *LightHouse) IsLighthouseAddr(vpnAddr netip.Addr) bool { func (lh *LightHouse) IsLighthouseAddr(vpnAddr netip.Addr) bool {
l := lh.GetLighthouses() l := lh.GetLighthouses()
for i := range l { return slices.Contains(l, vpnAddr)
if l[i] == vpnAddr {
return true
}
}
return false
} }
func (lh *LightHouse) IsAnyLighthouseAddr(vpnAddrs []netip.Addr) bool { func (lh *LightHouse) IsAnyLighthouseAddr(vpnAddrs []netip.Addr) bool {
l := lh.GetLighthouses() l := lh.GetLighthouses()
for i := range vpnAddrs { for i := range vpnAddrs {
for j := range l { if slices.Contains(l, vpnAddrs[i]) {
if l[j] == vpnAddrs[i] { return true
return true
}
} }
} }
return false return false
+8 -9
View File
@@ -1,7 +1,6 @@
package nebula package nebula
import ( import (
"context"
"encoding/binary" "encoding/binary"
"fmt" "fmt"
"net/netip" "net/netip"
@@ -42,14 +41,14 @@ func Test_lhStaticMapping(t *testing.T) {
c := config.NewC(l) c := config.NewC(l)
c.Settings["lighthouse"] = map[string]any{"hosts": []any{lh1}} c.Settings["lighthouse"] = map[string]any{"hosts": []any{lh1}}
c.Settings["static_host_map"] = map[string]any{lh1: []any{"1.1.1.1:4242"}} c.Settings["static_host_map"] = map[string]any{lh1: []any{"1.1.1.1:4242"}}
_, err := NewLightHouseFromConfig(context.Background(), l, c, cs, nil, nil) _, err := NewLightHouseFromConfig(t.Context(), l, c, cs, nil, nil)
require.NoError(t, err) require.NoError(t, err)
lh2 := "10.128.0.3" lh2 := "10.128.0.3"
c = config.NewC(l) c = config.NewC(l)
c.Settings["lighthouse"] = map[string]any{"hosts": []any{lh1, lh2}} c.Settings["lighthouse"] = map[string]any{"hosts": []any{lh1, lh2}}
c.Settings["static_host_map"] = map[string]any{lh1: []any{"100.1.1.1:4242"}} c.Settings["static_host_map"] = map[string]any{lh1: []any{"100.1.1.1:4242"}}
_, err = NewLightHouseFromConfig(context.Background(), l, c, cs, nil, nil) _, err = NewLightHouseFromConfig(t.Context(), l, c, cs, nil, nil)
require.EqualError(t, err, "lighthouse 10.128.0.3 does not have a static_host_map entry") require.EqualError(t, err, "lighthouse 10.128.0.3 does not have a static_host_map entry")
} }
@@ -71,7 +70,7 @@ func TestReloadLighthouseInterval(t *testing.T) {
} }
c.Settings["static_host_map"] = map[string]any{lh1: []any{"1.1.1.1:4242"}} c.Settings["static_host_map"] = map[string]any{lh1: []any{"1.1.1.1:4242"}}
lh, err := NewLightHouseFromConfig(context.Background(), l, c, cs, nil, nil) lh, err := NewLightHouseFromConfig(t.Context(), l, c, cs, nil, nil)
require.NoError(t, err) require.NoError(t, err)
lh.ifce = &mockEncWriter{} lh.ifce = &mockEncWriter{}
@@ -99,7 +98,7 @@ func BenchmarkLighthouseHandleRequest(b *testing.B) {
} }
c := config.NewC(l) c := config.NewC(l)
lh, err := NewLightHouseFromConfig(context.Background(), l, c, cs, nil, nil) lh, err := NewLightHouseFromConfig(b.Context(), l, c, cs, nil, nil)
require.NoError(b, err) require.NoError(b, err)
hAddr := netip.MustParseAddrPort("4.5.6.7:12345") hAddr := netip.MustParseAddrPort("4.5.6.7:12345")
@@ -202,7 +201,7 @@ func TestLighthouse_Memory(t *testing.T) {
myVpnNetworks: []netip.Prefix{myVpnNet}, myVpnNetworks: []netip.Prefix{myVpnNet},
myVpnNetworksTable: nt, myVpnNetworksTable: nt,
} }
lh, err := NewLightHouseFromConfig(context.Background(), l, c, cs, nil, nil) lh, err := NewLightHouseFromConfig(t.Context(), l, c, cs, nil, nil)
lh.ifce = &mockEncWriter{} lh.ifce = &mockEncWriter{}
require.NoError(t, err) require.NoError(t, err)
lhh := lh.NewRequestHandler() lhh := lh.NewRequestHandler()
@@ -288,7 +287,7 @@ func TestLighthouse_reload(t *testing.T) {
myVpnNetworksTable: nt, myVpnNetworksTable: nt,
} }
lh, err := NewLightHouseFromConfig(context.Background(), l, c, cs, nil, nil) lh, err := NewLightHouseFromConfig(t.Context(), l, c, cs, nil, nil)
require.NoError(t, err) require.NoError(t, err)
nc := map[string]any{ nc := map[string]any{
@@ -523,7 +522,7 @@ func TestLighthouse_Dont_Delete_Static_Hosts(t *testing.T) {
myVpnNetworks: []netip.Prefix{myVpnNet}, myVpnNetworks: []netip.Prefix{myVpnNet},
myVpnNetworksTable: nt, myVpnNetworksTable: nt,
} }
lh, err := NewLightHouseFromConfig(context.Background(), l, c, cs, nil, nil) lh, err := NewLightHouseFromConfig(t.Context(), l, c, cs, nil, nil)
require.NoError(t, err) require.NoError(t, err)
lh.ifce = &mockEncWriter{} lh.ifce = &mockEncWriter{}
@@ -589,7 +588,7 @@ func TestLighthouse_DeletesWork(t *testing.T) {
myVpnNetworks: []netip.Prefix{myVpnNet}, myVpnNetworks: []netip.Prefix{myVpnNet},
myVpnNetworksTable: nt, myVpnNetworksTable: nt,
} }
lh, err := NewLightHouseFromConfig(context.Background(), l, c, cs, nil, nil) lh, err := NewLightHouseFromConfig(t.Context(), l, c, cs, nil, nil)
require.NoError(t, err) require.NoError(t, err)
lh.ifce = &mockEncWriter{} lh.ifce = &mockEncWriter{}
+6 -9
View File
@@ -105,11 +105,7 @@ func Main(c *config.C, configTest bool, buildVersion string, logger *logrus.Logg
// deprecated and undocumented // deprecated and undocumented
tunQueues := c.GetInt("tun.routines", 1) tunQueues := c.GetInt("tun.routines", 1)
udpQueues := c.GetInt("listen.routines", 1) udpQueues := c.GetInt("listen.routines", 1)
if tunQueues > udpQueues { routines = max(tunQueues, udpQueues)
routines = tunQueues
} else {
routines = udpQueues
}
if routines != 1 { if routines != 1 {
l.WithField("routines", routines).Warn("Setting tun.routines and listen.routines is deprecated. Use `routines` instead") l.WithField("routines", routines).Warn("Setting tun.routines and listen.routines is deprecated. Use `routines` instead")
} }
@@ -208,10 +204,11 @@ func Main(c *config.C, configTest bool, buildVersion string, logger *logrus.Logg
useRelays := c.GetBool("relay.use_relays", DefaultUseRelays) && !c.GetBool("relay.am_relay", false) useRelays := c.GetBool("relay.use_relays", DefaultUseRelays) && !c.GetBool("relay.am_relay", false)
handshakeConfig := HandshakeConfig{ handshakeConfig := HandshakeConfig{
tryInterval: c.GetDuration("handshakes.try_interval", DefaultHandshakeTryInterval), tryInterval: c.GetDuration("handshakes.try_interval", DefaultHandshakeTryInterval),
retries: int64(c.GetInt("handshakes.retries", DefaultHandshakeRetries)), retries: int64(c.GetInt("handshakes.retries", DefaultHandshakeRetries)),
triggerBuffer: c.GetInt("handshakes.trigger_buffer", DefaultHandshakeTriggerBuffer), triggerBuffer: c.GetInt("handshakes.trigger_buffer", DefaultHandshakeTriggerBuffer),
useRelays: useRelays, useRelays: useRelays,
maxHandshakeRate: c.GetInt("handshakes.max_rate", DefaultMaxHandshakeRate),
messageMetrics: messageMetrics, messageMetrics: messageMetrics,
} }
+1 -1
View File
@@ -22,7 +22,7 @@ const EncryptLockNeeded = true
// NewGCMTLS is no longer exposed in go1.19+, so we need to link it in // NewGCMTLS is no longer exposed in go1.19+, so we need to link it in
// See: https://github.com/golang/go/issues/56326 // See: https://github.com/golang/go/issues/56326
// //
// NewGCMTLS is the internal method used with boringcrypto that provices a // NewGCMTLS is the internal method used with boringcrypto that provides a
// validated mode of AES-GCM which enforces the nonce is strictly // validated mode of AES-GCM which enforces the nonce is strictly
// monotonically increasing. This is the TLS 1.2 specification for nonce // monotonically increasing. This is the TLS 1.2 specification for nonce
// generation (which also matches the method used by the Noise Protocol) // generation (which also matches the method used by the Noise Protocol)
-1
View File
@@ -1,5 +1,4 @@
//go:build !boringcrypto //go:build !boringcrypto
// +build !boringcrypto
package nebula package nebula
+46 -19
View File
@@ -190,6 +190,13 @@ func (f *Interface) readOutsidePackets(via ViaSender, out []byte, packet []byte,
if !f.handleEncrypted(ci, via, h) { if !f.handleEncrypted(ci, via, h) {
return return
} }
_, err = f.decrypt(hostinfo, h.MessageCounter, out, packet, h, nb)
if err != nil {
hostinfo.logger(f.l).WithError(err).WithField("from", via).
WithField("packet", packet).
Error("Failed to decrypt CloseTunnel packet")
return
}
hostinfo.logger(f.l).WithField("from", via). hostinfo.logger(f.l).WithField("from", via).
Info("Close tunnel received, tearing down.") Info("Close tunnel received, tearing down.")
@@ -327,13 +334,29 @@ func parseV6(data []byte, incoming bool, fp *firewall.Packet) error {
proto := layers.IPProtocol(data[protoAt]) proto := layers.IPProtocol(data[protoAt])
switch proto { switch proto {
case layers.IPProtocolICMPv6, layers.IPProtocolESP, layers.IPProtocolNoNextHeader: case layers.IPProtocolESP, layers.IPProtocolNoNextHeader:
fp.Protocol = uint8(proto) fp.Protocol = uint8(proto)
fp.RemotePort = 0 fp.RemotePort = 0
fp.LocalPort = 0 fp.LocalPort = 0
fp.Fragment = false fp.Fragment = false
return nil return nil
case layers.IPProtocolICMPv6:
if dataLen < offset+6 {
return ErrIPv6PacketTooShort
}
fp.Protocol = uint8(proto)
fp.LocalPort = 0 //incoming vs outgoing doesn't matter for icmpv6
icmptype := data[offset+1]
switch icmptype {
case layers.ICMPv6TypeEchoRequest, layers.ICMPv6TypeEchoReply:
fp.RemotePort = binary.BigEndian.Uint16(data[offset+4 : offset+6]) //identifier
default:
fp.RemotePort = 0
}
fp.Fragment = false
return nil
case layers.IPProtocolTCP, layers.IPProtocolUDP: case layers.IPProtocolTCP, layers.IPProtocolUDP:
if dataLen < offset+4 { if dataLen < offset+4 {
return ErrIPv6PacketTooShort return ErrIPv6PacketTooShort
@@ -423,34 +446,38 @@ func parseV4(data []byte, incoming bool, fp *firewall.Packet) error {
// Accounting for a variable header length, do we have enough data for our src/dst tuples? // Accounting for a variable header length, do we have enough data for our src/dst tuples?
minLen := ihl minLen := ihl
if !fp.Fragment && fp.Protocol != firewall.ProtoICMP { if !fp.Fragment {
minLen += minFwPacketLen if fp.Protocol == firewall.ProtoICMP {
minLen += minFwPacketLen + 2
} else {
minLen += minFwPacketLen
}
} }
if len(data) < minLen { if len(data) < minLen {
return ErrIPv4InvalidHeaderLength return ErrIPv4InvalidHeaderLength
} }
// Firewall packets are locally oriented if incoming { // Firewall packets are locally oriented
if incoming {
fp.RemoteAddr, _ = netip.AddrFromSlice(data[12:16]) fp.RemoteAddr, _ = netip.AddrFromSlice(data[12:16])
fp.LocalAddr, _ = netip.AddrFromSlice(data[16:20]) fp.LocalAddr, _ = netip.AddrFromSlice(data[16:20])
if fp.Fragment || fp.Protocol == firewall.ProtoICMP {
fp.RemotePort = 0
fp.LocalPort = 0
} else {
fp.RemotePort = binary.BigEndian.Uint16(data[ihl : ihl+2])
fp.LocalPort = binary.BigEndian.Uint16(data[ihl+2 : ihl+4])
}
} else { } else {
fp.LocalAddr, _ = netip.AddrFromSlice(data[12:16]) fp.LocalAddr, _ = netip.AddrFromSlice(data[12:16])
fp.RemoteAddr, _ = netip.AddrFromSlice(data[16:20]) fp.RemoteAddr, _ = netip.AddrFromSlice(data[16:20])
if fp.Fragment || fp.Protocol == firewall.ProtoICMP { }
fp.RemotePort = 0
fp.LocalPort = 0 if fp.Fragment {
} else { fp.RemotePort = 0
fp.LocalPort = binary.BigEndian.Uint16(data[ihl : ihl+2]) fp.LocalPort = 0
fp.RemotePort = binary.BigEndian.Uint16(data[ihl+2 : ihl+4]) } else if fp.Protocol == firewall.ProtoICMP { //note that orientation doesn't matter on ICMP
} fp.RemotePort = binary.BigEndian.Uint16(data[ihl+4 : ihl+6]) //identifier
fp.LocalPort = 0 //code would be uint16(data[ihl+1])
} else if incoming {
fp.RemotePort = binary.BigEndian.Uint16(data[ihl : ihl+2]) //src port
fp.LocalPort = binary.BigEndian.Uint16(data[ihl+2 : ihl+4]) //dst port
} else {
fp.LocalPort = binary.BigEndian.Uint16(data[ihl : ihl+2]) //src port
fp.RemotePort = binary.BigEndian.Uint16(data[ihl+2 : ihl+4]) //dst port
} }
return nil return nil
+17 -10
View File
@@ -155,6 +155,7 @@ func Test_newPacket_v6(t *testing.T) {
// next layer, missing length byte // next layer, missing length byte
err = newPacket(buffer.Bytes()[:49], true, p) err = newPacket(buffer.Bytes()[:49], true, p)
require.ErrorIs(t, err, ErrIPv6CouldNotFindPayload) require.ErrorIs(t, err, ErrIPv6CouldNotFindPayload)
err = nil
// A good ICMP packet // A good ICMP packet
ip = layers.IPv6{ ip = layers.IPv6{
@@ -165,20 +166,26 @@ func Test_newPacket_v6(t *testing.T) {
DstIP: net.IPv6linklocalallnodes, DstIP: net.IPv6linklocalallnodes,
} }
icmp := layers.ICMPv6{} icmp := layers.ICMPv6{
TypeCode: layers.ICMPv6TypeEchoRequest,
buffer.Clear() Checksum: 0x1234,
err = gopacket.SerializeLayers(buffer, opt, &ip, &icmp)
if err != nil {
panic(err)
} }
err = newPacket(buffer.Bytes(), true, p) buffer.Clear()
require.NoError(t, err) require.NoError(t, gopacket.SerializeLayers(buffer, opt, &ip, &icmp))
require.Error(t, newPacket(buffer.Bytes(), true, p))
buffer.Clear()
echo := layers.ICMPv6Echo{
Identifier: 0xabcd,
SeqNumber: 1234,
}
require.NoError(t, gopacket.SerializeLayers(buffer, opt, &ip, &icmp, &echo))
require.NoError(t, newPacket(buffer.Bytes(), true, p))
assert.Equal(t, uint8(layers.IPProtocolICMPv6), p.Protocol) assert.Equal(t, uint8(layers.IPProtocolICMPv6), p.Protocol)
assert.Equal(t, netip.MustParseAddr("ff02::2"), p.RemoteAddr) assert.Equal(t, netip.MustParseAddr("ff02::2"), p.RemoteAddr)
assert.Equal(t, netip.MustParseAddr("ff02::1"), p.LocalAddr) assert.Equal(t, netip.MustParseAddr("ff02::1"), p.LocalAddr)
assert.Equal(t, uint16(0), p.RemotePort) assert.Equal(t, uint16(0xabcd), p.RemotePort)
assert.Equal(t, uint16(0), p.LocalPort) assert.Equal(t, uint16(0), p.LocalPort)
assert.False(t, p.Fragment) assert.False(t, p.Fragment)
@@ -574,7 +581,7 @@ func BenchmarkParseV6(b *testing.B) {
} }
evilBytes := buffer.Bytes() evilBytes := buffer.Bytes()
for i := 0; i < 200; i++ { for range 200 {
evilBytes = append(evilBytes, hopHeader...) evilBytes = append(evilBytes, hopHeader...)
} }
evilBytes = append(evilBytes, lastHopHeader...) evilBytes = append(evilBytes, lastHopHeader...)
+9
View File
@@ -12,6 +12,15 @@ import (
const DefaultMTU = 1300 const DefaultMTU = 1300
type NameError struct {
Name string
Underlying error
}
func (e *NameError) Error() string {
return fmt.Sprintf("could not set tun device name: %s because %s", e.Name, e.Underlying)
}
// TODO: We may be able to remove routines // TODO: We may be able to remove routines
type DeviceFactory func(c *config.C, l *logrus.Logger, vpnNetworks []netip.Prefix, routines int) (Device, error) type DeviceFactory func(c *config.C, l *logrus.Logger, vpnNetworks []netip.Prefix, routines int) (Device, error)
+1 -1
View File
@@ -266,7 +266,7 @@ func newTun(c *config.C, l *logrus.Logger, vpnNetworks []netip.Prefix, _ bool) (
} }
// Set the device name // Set the device name
ioctl(fd, syscall.SIOCSIFNAME, uintptr(unsafe.Pointer(&ifrr))) _ = ioctl(fd, syscall.SIOCSIFNAME, uintptr(unsafe.Pointer(&ifrr)))
} }
t := &tun{ t := &tun{
+8 -2
View File
@@ -112,9 +112,13 @@ func newTun(c *config.C, l *logrus.Logger, vpnNetworks []netip.Prefix, multiqueu
if multiqueue { if multiqueue {
req.Flags |= unix.IFF_MULTI_QUEUE req.Flags |= unix.IFF_MULTI_QUEUE
} }
copy(req.Name[:], c.GetString("tun.dev", "")) nameStr := c.GetString("tun.dev", "")
copy(req.Name[:], nameStr)
if err = ioctl(uintptr(fd), uintptr(unix.TUNSETIFF), uintptr(unsafe.Pointer(&req))); err != nil { if err = ioctl(uintptr(fd), uintptr(unix.TUNSETIFF), uintptr(unsafe.Pointer(&req))); err != nil {
return nil, err return nil, &NameError{
Name: nameStr,
Underlying: err,
}
} }
name := strings.Trim(string(req.Name[:]), "\x00") name := strings.Trim(string(req.Name[:]), "\x00")
@@ -137,6 +141,7 @@ func newTunGeneric(c *config.C, l *logrus.Logger, file *os.File, vpnNetworks []n
TXQueueLen: c.GetInt("tun.tx_queue", 500), TXQueueLen: c.GetInt("tun.tx_queue", 500),
useSystemRoutes: c.GetBool("tun.use_system_route_table", false), useSystemRoutes: c.GetBool("tun.use_system_route_table", false),
useSystemRoutesBufferSize: c.GetInt("tun.use_system_route_table_buffer_size", 0), useSystemRoutesBufferSize: c.GetInt("tun.use_system_route_table_buffer_size", 0),
routesFromSystem: map[netip.Prefix]routing.Gateways{},
l: l, l: l,
} }
@@ -712,6 +717,7 @@ func (t *tun) Close() error {
if t.ioctlFd > 0 { if t.ioctlFd > 0 {
_ = os.NewFile(t.ioctlFd, "ioctlFd").Close() _ = os.NewFile(t.ioctlFd, "ioctlFd").Close()
t.ioctlFd = 0
} }
return nil return nil
+4 -1
View File
@@ -74,7 +74,10 @@ func newTun(c *config.C, l *logrus.Logger, vpnNetworks []netip.Prefix, _ bool) (
l.WithError(err).Debug("Failed to create wintun device, retrying") l.WithError(err).Debug("Failed to create wintun device, retrying")
tunDevice, err = wintun.CreateTUNWithRequestedGUID(deviceName, guid, t.MTU) tunDevice, err = wintun.CreateTUNWithRequestedGUID(deviceName, guid, t.MTU)
if err != nil { if err != nil {
return nil, fmt.Errorf("create TUN device failed: %w", err) return nil, &NameError{
Name: deviceName,
Underlying: fmt.Errorf("create TUN device failed: %w", err),
}
} }
} }
t.tun = tunDevice.(*wintun.NativeTun) t.tun = tunDevice.(*wintun.NativeTun)
+1 -1
View File
@@ -55,7 +55,7 @@ func (rm *relayManager) setAmRelay(v bool) {
func AddRelay(l *logrus.Logger, relayHostInfo *HostInfo, hm *HostMap, vpnIp netip.Addr, remoteIdx *uint32, relayType int, state int) (uint32, error) { func AddRelay(l *logrus.Logger, relayHostInfo *HostInfo, hm *HostMap, vpnIp netip.Addr, remoteIdx *uint32, relayType int, state int) (uint32, error) {
hm.Lock() hm.Lock()
defer hm.Unlock() defer hm.Unlock()
for i := 0; i < 32; i++ { for range 32 {
index, err := generateIndex(l) index, err := generateIndex(l)
if err != nil { if err != nil {
return 0, err return 0, err
+1 -6
View File
@@ -404,12 +404,7 @@ func (r *RemoteList) Rebuild(preferredRanges []netip.Prefix) {
// unlockedIsBad assumes you have the write lock and checks if the remote matches any entry in the blocked address list // unlockedIsBad assumes you have the write lock and checks if the remote matches any entry in the blocked address list
func (r *RemoteList) unlockedIsBad(remote netip.AddrPort) bool { func (r *RemoteList) unlockedIsBad(remote netip.AddrPort) bool {
for _, v := range r.badRemotes { return slices.Contains(r.badRemotes, remote)
if v == remote {
return true
}
}
return false
} }
// unlockedSetLearnedV4 assumes you have the write lock and sets the current learned address for this owner and marks the // unlockedSetLearnedV4 assumes you have the write lock and sets the current learned address for this owner and marks the
+1 -1
View File
@@ -6,7 +6,7 @@ import (
) )
const ( const (
// Sentinal value // Sentinel value
BucketNotCalculated = -1 BucketNotCalculated = -1
) )
+5 -3
View File
@@ -6,6 +6,7 @@ import (
"errors" "errors"
"flag" "flag"
"fmt" "fmt"
"maps"
"net" "net"
"net/netip" "net/netip"
"os" "os"
@@ -631,6 +632,9 @@ func sshCreateTunnel(ifce *Interface, fs any, a []string, w sshd.StringWriter) e
} }
hostInfo = ifce.handshakeManager.StartHandshake(vpnAddr, nil) hostInfo = ifce.handshakeManager.StartHandshake(vpnAddr, nil)
if hostInfo == nil {
return w.WriteLine("Handshake rate limit reached")
}
if addr.IsValid() { if addr.IsValid() {
hostInfo.SetRemote(addr) hostInfo.SetRemote(addr)
} }
@@ -831,9 +835,7 @@ func sshPrintRelays(ifce *Interface, fs any, a []string, w sshd.StringWriter) er
relays := map[uint32]*HostInfo{} relays := map[uint32]*HostInfo{}
ifce.hostMap.Lock() ifce.hostMap.Lock()
for k, v := range ifce.hostMap.Relays { maps.Copy(relays, ifce.hostMap.Relays)
relays[k] = v
}
ifce.hostMap.Unlock() ifce.hostMap.Unlock()
type RelayFor struct { type RelayFor struct {
+2 -2
View File
@@ -134,7 +134,7 @@ func TestTimerWheel_Purge(t *testing.T) {
assert.True(t, tw.lastTick.After(lastTick)) assert.True(t, tw.lastTick.After(lastTick))
// Make sure we get all 4 packets back // Make sure we get all 4 packets back
for i := 0; i < 4; i++ { for i := range 4 {
p, has := tw.Purge() p, has := tw.Purge()
assert.True(t, has) assert.True(t, has)
assert.Equal(t, fps[i], p) assert.Equal(t, fps[i], p)
@@ -149,7 +149,7 @@ func TestTimerWheel_Purge(t *testing.T) {
// Make sure we cached the free'd items // Make sure we cached the free'd items
assert.Equal(t, 4, tw.itemsCached) assert.Equal(t, 4, tw.itemsCached)
ci := tw.itemCache ci := tw.itemCache
for i := 0; i < 4; i++ { for range 4 {
assert.NotNil(t, ci) assert.NotNil(t, ci)
ci = ci.Next ci = ci.Next
} }