nebula/localapi/server.go

package localapi

import (
	"bytes"
	"context"
	"encoding/json"
	"errors"
	"fmt"
	"io"
	"log/slog"
	"math"
	"net"
	"runtime/debug"
	"strconv"
	"sync/atomic"
	"time"

	"github.com/slackhq/nebula/commands"
)

const (
	// defaultMaxConns caps concurrent connections. Exceeding it is rejected rather than
	// queued: a queue turns a load problem into a latency problem and hides it.
	defaultMaxConns = 8

	// readTimeout bounds how long a client may take to send its request line.
	readTimeout = 10 * time.Second

	// writeTimeout bounds a single write. A client that stops reading is dropped rather
	// than waited on, so a paused terminal cannot pin daemon resources.
	writeTimeout = 30 * time.Second

	// defaultSlowAfter is how long a command may run before the daemon says so. A
	// command holds a connection slot until it returns, and one that never returns
	// holds it for good; after enough of those the socket answers only "busy". The
	// warning is what tells an operator that from load, and names the command.
	defaultSlowAfter = 30 * time.Second
)

// Server serves a command registry over a local socket to the user who ran nebula.
type Server struct {
	endpoint
	src *commands.Registry

	maxConns  int
	slowAfter time.Duration

	sem  chan struct{}
	euid uint32

	// trustSocket is set while a group shares the socket. The kernel admitted the peer
	// through the socket's mode and group, which is the whole access control then, and
	// the peer check below stands aside: on unix it sees the peer's uid and primary gid
	// only, so it could not tell a member of the group from anyone else.
	trustSocket atomic.Bool
}

// NewServer returns a Server that will serve every command in reg, including one
// registered on it after the server is built.
func NewServer(l *slog.Logger, reg *commands.Registry) *Server {
	return &Server{
		endpoint:  endpoint{l: l, name: "local control socket"},
		src:       reg,
		maxConns:  defaultMaxConns,
		slowAfter: defaultSlowAfter,
		// The same identity the client's owner check is made for, so the peer check
		// cannot disagree with it, and so a test can stand in for it the same way.
		euid: currentUID(),
	}
}

// Rebind brings the server up at path, moves a running server there, and serves it until
// Stop or ctx cancellation; endpoint.rebindLocked says what that promises. An error here
// is never fatal to the caller: nebula keeps forwarding packets without a control
// endpoint, and the caller is expected to log and carry on.
func (s *Server) Rebind(ctx context.Context, path string, acc Access) error {
	s.mu.Lock()
	defer s.mu.Unlock()

	// Set before the access is applied, not after, so no connection the new access
	// admits is checked against the old setting. Early is safe either way: a member
	// arriving before a group's mode is set is refused by the kernel, and with a group
	// being taken away the peer check applies a moment before the mode tightens.
	prev := s.trustSocket.Swap(acc.shared())
	err := s.rebindLocked(ctx, path, acc, func(ln net.Listener) io.Closer {
		s.l.Info("Local control socket listening", "path", path, "access", acc.String())
		// Closing the listener, when it is given up, ends the accept loop on the
		// closed-listener error; in flight commands keep their connections, which stay
		// usable until they finish.
		go s.accept(ln, s.semaphore())
		return ln
	})
	if err != nil {
		// Whatever was serving still is, with the access it had.
		s.trustSocket.Store(prev)
	}
	return err
}

// semaphore returns the connection limiter, creating it on first use. It is made once
// and never replaced: a handler releases into the channel it acquired from, so swapping
// in a fresh one across a Stop and Rebind would leave any handler still in flight
// blocked forever on a channel nothing had filled. Callers hold s.mu.
func (s *Server) semaphore() chan struct{} {
	if s.sem == nil {
		s.sem = make(chan struct{}, s.maxConns)
	}
	return s.sem
}

// Accept failures that are not the listener closing are retried after a pause that
// doubles from acceptRetryMin up to acceptRetryMax, the same shape as net/http.Serve.
const (
	acceptRetryMin = 5 * time.Millisecond
	acceptRetryMax = time.Second
)

// accept serves connections from ln until it is closed. sem is the limiter to acquire
// from and release into; it is passed rather than read from s so the handlers spawned
// here never touch s.sem without the lock.
//
// Only a closed listener ends the loop; Stop and Rebind are the two things that close
// it. Every other error is retried: the process being out of descriptors (EMFILE,
// ENFILE) or a client that hung up between the kernel's queue and us (ECONNABORTED)
// are passing conditions, and giving up on them would leave a socket on disk that
// nothing answers, with the reason buried in a log line from minutes or days earlier.
func (s *Server) accept(ln net.Listener, sem chan struct{}) {
	var delay time.Duration
	for {
		conn, err := ln.Accept()
		if err != nil {
			if errors.Is(err, net.ErrClosed) {
				return
			}

			if ne, ok := err.(net.Error); ok && ne.Timeout() {
				continue
			}

			if delay == 0 {
				delay = acceptRetryMin
			} else {
				delay = min(delay*2, acceptRetryMax)
			}
			s.l.Warn("Local control socket could not accept a connection, retrying", "error", err, "retry_in", delay)
			time.Sleep(delay)
			continue
		}
		delay = 0

		select {
		case sem <- struct{}{}:
		default:
			// At capacity. Say so and hang up rather than holding the connection open.
			// Logged too: a slot is held for as long as a command runs, and the slow
			// command warning in serve says which ones are still running.
			s.l.Warn("Local control socket is at capacity, refusing a connection", "max", s.maxConns)
			s.reply(conn, &Response{Version: ProtocolVersion, Error: "local control socket is busy, try again"})
			_ = conn.Close()
			continue
		}

		go func() {
			defer func() { <-sem }()
			s.handle(conn)
		}()
	}
}

// handle serves one request. It recovers from panics in command callbacks: this
// surface is present on every install and reachable by any local process running as
// the daemon's user, so a malformed argument must cost a connection rather than the
// overlay.
func (s *Server) handle(conn net.Conn) {
	defer conn.Close()

	var args []string
	defer func() {
		if r := recover(); r != nil {
			s.l.Error("Recovered from panic serving a local control command",
				"panic", r,
				"args", args,
				"stack", string(debug.Stack()),
			)
			s.reply(conn, &Response{Version: ProtocolVersion, Error: "command failed"})
		}
	}()

	// Where the platform can identify the caller, check it, unless a group shares the
	// socket; see trustSocket. Otherwise listen's mode or security descriptor stands.
	if peerCheckSupported && !s.trustSocket.Load() {
		uid, err := peerUID(conn)
		if err != nil {
			s.l.Warn("Refusing local control connection with unreadable credentials", "error", err)
			return
		}

		// Access is restricted to the user who ran nebula. Root is allowed through
		// because it can reach the daemon's memory regardless of what this check says.
		if uid != s.euid && uid != 0 {
			s.l.Warn("Refusing local control connection from another user", "peerUid", uid)
			s.reply(conn, &Response{Version: ProtocolVersion, Error: "not permitted"})
			return
		}
	}

	_ = conn.SetReadDeadline(time.Now().Add(readTimeout))

	req, err := readRequest(conn)
	if err != nil {
		s.reply(conn, &Response{Version: ProtocolVersion, Error: err.Error()})
		return
	}
	args = req.Args

	// No deadline while a command runs; the write deadline below is what bounds a client
	// that stops reading.
	_ = conn.SetReadDeadline(time.Time{})
	_ = conn.SetWriteDeadline(time.Now().Add(writeTimeout))

	s.reply(conn, s.serve(req))
}

// serve runs one request and describes the outcome.
//
// Nothing bounds a command's run; a context would have to reach every Run. What is
// bounded is the silence: a command still running at slowAfter is named in the log, with
// the slot it is holding, so a socket that has gone "busy" can be traced to the commands
// that wedged it. The timer is stopped however the command ends, a panic included, so
// the line is only ever written about a command that is still running.
func (s *Server) serve(req *Request) *Response {
	slow := time.AfterFunc(s.slowAfter, func() {
		s.l.Warn("Local control command is still running and holding a connection slot",
			"command", req.Command,
			"args", req.Args,
			"after", s.slowAfter,
			"max", s.maxConns,
		)
	})
	defer slow.Stop()

	res := &Response{Version: ProtocolVersion}
	reg := s.src

	if req.Describe {
		schema, err := json.Marshal(reg.Schema())
		if err != nil {
			res.Error = err.Error()
			return res
		}

		res.Result = schema
		return res
	}

	if req.Command == "" {
		res.Error = "no command given"
		return res
	}

	params, err := stringParams(req.Params)
	if err != nil {
		res.Error = err.Error()
		return res
	}

	format, err := parseFormat(req.Format)
	if err != nil {
		res.Error = err.Error()
		return res
	}

	cmd, err := reg.Resolve(commands.Name(req.Command))
	if err != nil {
		s.l.Debug("Local control command refused", "command", req.Command, "error", err)
		res.Error = err.Error()
		return res
	}

	r, err := commands.Invoke(commands.Request{Command: cmd, Params: params, Args: req.Args})
	if err != nil {
		s.l.Debug("Local control command failed", "command", req.Command, "error", err)
		res.Error = err.Error()
		return res
	}

	// A command that acts does so now, before the one reply this surface gives, and the
	// reply carries both halves: the line Run promised and the outcome Then produced.
	// In JSON only the outcome travels, since the promise is for a person to read.
	var preface []byte
	if cmd.Then != nil && r.OK {
		if format == commands.FormatText && !r.Empty() {
			buf := &bytes.Buffer{}
			if err := commands.Render(cmd, r, format, buf); err == nil {
				preface = buf.Bytes()
			}
		}
		r = cmd.Then()
	}

	// A command with nothing to say gets an empty, successful reply.
	if r.Empty() {
		res.Text = preface
		return res
	}

	return render(res, cmd, r, format, preface)
}

// render turns a command's Result into the response, in the format the caller asked for,
// through commands.Render, so the JSON is byte for byte what -json prints over ssh.
func render(res *Response, cmd *commands.Command, r commands.Result, format commands.Format, preface []byte) *Response {
	buf := &bytes.Buffer{}
	if err := commands.Render(cmd, r, format, buf); err != nil {
		res.Error = err.Error()
		return res
	}

	if format != commands.FormatText {
		// The caller is a program. Carry the payload as JSON rather than as a string that
		// happens to contain some; the newline Render ends a line with is not the value's.
		res.Result = bytes.TrimSuffix(buf.Bytes(), []byte("\n"))

		// A command that ran and refused is a failure to whoever asked, in either format.
		// The structured outcome still travels in Result for a program to read; Error
		// carries the reason so the one rule, Error set means failed, holds here too and
		// a client never has to guess from the payload.
		if !r.OK {
			res.Error = r.Reason
		}

		return res
	}

	// A command that ran and refused reads as an error to whoever asked for text: they
	// are a person or a script, and both expect a refusal on the error stream.
	if !r.OK {
		res.Error = string(append(preface, buf.Bytes()...))
		return res
	}

	// The bytes the command wrote, as they are; see Response.Text.
	res.Text = append(preface, buf.Bytes()...)
	return res
}

// parseFormat turns the request's format into the one the registry understands. An
// unknown value is an error rather than a silent default, so a client that asks for
// something this daemon cannot do hears about it.
func parseFormat(s string) (commands.Format, error) {
	switch s {
	case "", "json":
		return commands.FormatJSON, nil
	case "text":
		return commands.FormatText, nil
	default:
		return commands.FormatJSON, fmt.Errorf("unknown format %q, expected \"json\" or \"text\"", s)
	}
}

// reply writes one response frame.
func (s *Server) reply(conn net.Conn, res *Response) {
	_ = conn.SetWriteDeadline(time.Now().Add(writeTimeout))
	if err := writeFrame(conn, res); err != nil {
		s.l.Debug("Could not send a local control response", "error", err)
	}
}

// stringParams converts JSON's types into the strings flag.Value.Set expects, so a
// caller writes true and 3 rather than "true" and "3".
func stringParams(in map[string]any) (map[string]string, error) {
	if len(in) == 0 {
		return nil, nil
	}

	out := make(map[string]string, len(in))
	for k, v := range in {
		switch t := v.(type) {
		case bool:
			out[k] = strconv.FormatBool(t)
		case string:
			out[k] = t
		case float64:
			// encoding/json gives every number as a float64; render whole ones without
			// a decimal point so an int flag accepts them.
			if t != math.Trunc(t) {
				out[k] = strconv.FormatFloat(t, 'f', -1, 64)
				continue
			}

			// A whole float64 can be far outside int64, and Go's conversion of one that is
			// gives an unspecified value rather than an error, so the bounds are checked
			// first. MinInt64 is exactly representable and is in range. MaxInt64 is not:
			// as a float64 it rounds up to 2^63, which is the first value out of range,
			// hence the >= on that side.
			if t < math.MinInt64 || t >= math.MaxInt64 {
				return nil, fmt.Errorf("parameter %q is %s, outside the range of a 64-bit integer",
					k, strconv.FormatFloat(t, 'g', -1, 64))
			}
			out[k] = strconv.FormatInt(int64(t), 10)
		case nil:
			return nil, fmt.Errorf("parameter %q has no value", k)
		default:
			return nil, fmt.Errorf("parameter %q is not a string, number or boolean", k)
		}
	}

	return out, nil
}

func readRequest(conn net.Conn) (*Request, error) {
	req := &Request{}
	if err := readFrame(conn, MaxRequestBytes, "request", req, true); err != nil {
		return nil, err
	}

	if req.Version != ProtocolVersion {
		return nil, fmt.Errorf(
			"this nebula speaks local control protocol v%d, the client sent v%d; the two binaries are different versions",
			ProtocolVersion, req.Version,
		)
	}

	return req, nil
}