mirror of
https://github.com/slackhq/nebula.git
synced 2025-11-12 20:23:57 +01:00
6e0ae4f9a3
* firewall: add option to send REJECT replies
This change allows you to configure the firewall to send REJECT packets
when a packet is denied.
firewall:
# Action to take when a packet is not allowed by the firewall rules.
# Can be one of:
# `drop` (default): silently drop the packet.
# `reject`: send a reject reply.
# - For TCP, this will be a RST "Connection Reset" packet.
# - For other protocols, this will be an ICMP port unreachable packet.
outbound_action: drop
inbound_action: drop
These packets are only sent to established tunnels, and only on the
overlay network (currently IPv4 only).
$ ping -c1 192.168.100.3
PING 192.168.100.3 (192.168.100.3) 56(84) bytes of data.
From 192.168.100.3 icmp_seq=2 Destination Port Unreachable
--- 192.168.100.3 ping statistics ---
2 packets transmitted, 0 received, +1 errors, 100% packet loss, time 31ms
$ nc -nzv 192.168.100.3 22
(UNKNOWN) [192.168.100.3] 22 (?) : Connection refused
This change also modifies the smoke test to capture tcpdump pcaps from
both the inside and outside to inspect what is going on over the wire.
It also now does TCP and UDP packet tests using the Nmap version of
ncat.
* calculate seq and ack the same was as the kernel
The logic a bit confusing, so we copy it straight from how the kernel
does iptables `--reject-with tcp-reset`:
- https://github.com/torvalds/linux/blob/v5.19/net/ipv4/netfilter/nf_reject_ipv4.c#L193-L221
* cleanup
137 lines
4.6 KiB
Bash
Executable File
137 lines
4.6 KiB
Bash
Executable File
#!/bin/bash
|
|
|
|
set -e -x
|
|
|
|
set -o pipefail
|
|
|
|
mkdir -p logs
|
|
|
|
cleanup() {
|
|
echo
|
|
echo " *** cleanup"
|
|
echo
|
|
|
|
set +e
|
|
if [ "$(jobs -r)" ]
|
|
then
|
|
sudo docker kill lighthouse1 host2 host3 host4
|
|
fi
|
|
}
|
|
|
|
trap cleanup EXIT
|
|
|
|
sudo docker run --name lighthouse1 --rm nebula:smoke -config lighthouse1.yml -test
|
|
sudo docker run --name host2 --rm nebula:smoke -config host2.yml -test
|
|
sudo docker run --name host3 --rm nebula:smoke -config host3.yml -test
|
|
sudo docker run --name host4 --rm nebula:smoke -config host4.yml -test
|
|
|
|
sudo docker run --name lighthouse1 --device /dev/net/tun:/dev/net/tun --cap-add NET_ADMIN --rm nebula:smoke -config lighthouse1.yml 2>&1 | tee logs/lighthouse1 | sed -u 's/^/ [lighthouse1] /' &
|
|
sleep 1
|
|
sudo docker run --name host2 --device /dev/net/tun:/dev/net/tun --cap-add NET_ADMIN --rm nebula:smoke -config host2.yml 2>&1 | tee logs/host2 | sed -u 's/^/ [host2] /' &
|
|
sleep 1
|
|
sudo docker run --name host3 --device /dev/net/tun:/dev/net/tun --cap-add NET_ADMIN --rm nebula:smoke -config host3.yml 2>&1 | tee logs/host3 | sed -u 's/^/ [host3] /' &
|
|
sleep 1
|
|
sudo docker run --name host4 --device /dev/net/tun:/dev/net/tun --cap-add NET_ADMIN --rm nebula:smoke -config host4.yml 2>&1 | tee logs/host4 | sed -u 's/^/ [host4] /' &
|
|
sleep 1
|
|
|
|
# grab tcpdump pcaps for debugging
|
|
sudo docker exec lighthouse1 tcpdump -i nebula1 -q -w - -U 2>logs/lighthouse1.inside.log >logs/lighthouse1.inside.pcap &
|
|
sudo docker exec lighthouse1 tcpdump -i eth0 -q -w - -U 2>logs/lighthouse1.outside.log >logs/lighthouse1.outside.pcap &
|
|
sudo docker exec host2 tcpdump -i nebula1 -q -w - -U 2>logs/host2.inside.log >logs/host2.inside.pcap &
|
|
sudo docker exec host2 tcpdump -i eth0 -q -w - -U 2>logs/host2.outside.log >logs/host2.outside.pcap &
|
|
sudo docker exec host3 tcpdump -i nebula1 -q -w - -U 2>logs/host3.inside.log >logs/host3.inside.pcap &
|
|
sudo docker exec host3 tcpdump -i eth0 -q -w - -U 2>logs/host3.outside.log >logs/host3.outside.pcap &
|
|
sudo docker exec host4 tcpdump -i nebula1 -q -w - -U 2>logs/host4.inside.log >logs/host4.inside.pcap &
|
|
sudo docker exec host4 tcpdump -i eth0 -q -w - -U 2>logs/host4.outside.log >logs/host4.outside.pcap &
|
|
|
|
sudo docker exec host2 ncat -nklv 0.0.0.0 2000 &
|
|
sudo docker exec host3 ncat -nklv 0.0.0.0 2000 &
|
|
sudo docker exec host2 ncat -e '/usr/bin/echo host2' -nkluv 0.0.0.0 3000 &
|
|
sudo docker exec host3 ncat -e '/usr/bin/echo host3' -nkluv 0.0.0.0 3000 &
|
|
|
|
set +x
|
|
echo
|
|
echo " *** Testing ping from lighthouse1"
|
|
echo
|
|
set -x
|
|
sudo docker exec lighthouse1 ping -c1 192.168.100.2
|
|
sudo docker exec lighthouse1 ping -c1 192.168.100.3
|
|
|
|
set +x
|
|
echo
|
|
echo " *** Testing ping from host2"
|
|
echo
|
|
set -x
|
|
sudo docker exec host2 ping -c1 192.168.100.1
|
|
# Should fail because not allowed by host3 inbound firewall
|
|
! sudo docker exec host2 ping -c1 192.168.100.3 -w5 || exit 1
|
|
|
|
set +x
|
|
echo
|
|
echo " *** Testing ncat from host2"
|
|
echo
|
|
set -x
|
|
# Should fail because not allowed by host3 inbound firewall
|
|
! sudo docker exec host2 ncat -nzv -w5 192.168.100.3 2000 || exit 1
|
|
! sudo docker exec host2 ncat -nzuv -w5 192.168.100.3 3000 | grep -q host3 || exit 1
|
|
|
|
set +x
|
|
echo
|
|
echo " *** Testing ping from host3"
|
|
echo
|
|
set -x
|
|
sudo docker exec host3 ping -c1 192.168.100.1
|
|
sudo docker exec host3 ping -c1 192.168.100.2
|
|
|
|
set +x
|
|
echo
|
|
echo " *** Testing ncat from host3"
|
|
echo
|
|
set -x
|
|
sudo docker exec host3 ncat -nzv -w5 192.168.100.2 2000
|
|
sudo docker exec host3 ncat -nzuv -w5 192.168.100.2 3000 | grep -q host2
|
|
|
|
set +x
|
|
echo
|
|
echo " *** Testing ping from host4"
|
|
echo
|
|
set -x
|
|
sudo docker exec host4 ping -c1 192.168.100.1
|
|
# Should fail because not allowed by host4 outbound firewall
|
|
! sudo docker exec host4 ping -c1 192.168.100.2 -w5 || exit 1
|
|
! sudo docker exec host4 ping -c1 192.168.100.3 -w5 || exit 1
|
|
|
|
set +x
|
|
echo
|
|
echo " *** Testing ncat from host4"
|
|
echo
|
|
set -x
|
|
# Should fail because not allowed by host4 outbound firewall
|
|
! sudo docker exec host4 ncat -nzv -w5 192.168.100.2 2000 || exit 1
|
|
! sudo docker exec host4 ncat -nzv -w5 192.168.100.3 2000 || exit 1
|
|
! sudo docker exec host4 ncat -nzuv -w5 192.168.100.2 3000 | grep -q host2 || exit 1
|
|
! sudo docker exec host4 ncat -nzuv -w5 192.168.100.3 3000 | grep -q host3 || exit 1
|
|
|
|
set +x
|
|
echo
|
|
echo " *** Testing conntrack"
|
|
echo
|
|
set -x
|
|
# host2 can ping host3 now that host3 pinged it first
|
|
sudo docker exec host2 ping -c1 192.168.100.3
|
|
# host4 can ping host2 once conntrack established
|
|
sudo docker exec host2 ping -c1 192.168.100.4
|
|
sudo docker exec host4 ping -c1 192.168.100.2
|
|
|
|
sudo docker exec host4 sh -c 'kill 1'
|
|
sudo docker exec host3 sh -c 'kill 1'
|
|
sudo docker exec host2 sh -c 'kill 1'
|
|
sudo docker exec lighthouse1 sh -c 'kill 1'
|
|
sleep 1
|
|
|
|
if [ "$(jobs -r)" ]
|
|
then
|
|
echo "nebula still running after SIGTERM sent" >&2
|
|
exit 1
|
|
fi
|