Compare commits

..
Author SHA1 Message Date
JackDoan fd29ebdacd use a trampoline to get to the spicy _x functions 2026-09-25 13:01:50 -05:00
JackDoan 2ff4852551 split tun setup and tun IO 2026-09-25 12:26:07 -05:00
Caleb JasikandClaude Opus 5.5 10e1924489 udp/darwin: batch sends with sendmsg_x
WriteBatch hands up to 64 datagrams to one sendmsg_x call instead of
one sendto each. The socket is unconnected, so xnu still runs every
message through sendit, per-send MAC checks included; the saving is the
syscall crossings.

xnu's per-message loop stops at the first message that fails. For
EWOULDBLOCK, ENOBUFS and EMSGSIZE it reports how many went out, or the
errno alone when none did; for any other error it returns only the
errno, with the messages before it already sent. So each call carries
one run of datagrams to a single destination, and nothing is resent
after the kernel may have taken it. A datagram that fails on its own
account (a full interface queue, an oversize packet) goes to sendto,
which delivers or reports it, so it costs only itself, as without
batching; a refused destination costs its run. ENOSYS/EOPNOTSUPP, or
EPERM/EINVAL on a datagram sendto then delivers, switch the socket
back to sendto for good.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-09-24 16:10:26 -05:00
Caleb JasikandClaude Opus 5.5 4d191f805f overlay/darwin: drain several tun packets per read wakeup
The darwin tun returned one packet per Read, and listenIn flushes its
UDP send batch after every Read, so each outbound packet went to the
underlay as its own batch. tunQueue.Read now keeps calling readv until
the utun would block, up to tunReadBatch packets, so a burst reaches the
send batch together.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-09-24 12:44:00 -05:00
Caleb JasikandClaude Opus 5.5 61947ff1c2 overlay/darwin: batch tun writes with sendmsg_x
Passthrough.Flush hands its whole lane to a new tio.BatchWriter in one
WriteBatch call when the queue implements it, and NewSingleQueue
exposes WriteBatch when its source does. On darwin, tun.WriteBatch
writes up to 64 packets per sendmsg_x on the utun control socket,
which is a connected datagram socket, so xnu takes the batched
sendit_x path rather than one sendit per message. utun registers no
send_list handler, so the kernel still passes each packet to utun on
its own: this saves syscalls and fd locking, not per-packet kernel work.

Error handling follows what sendmsg_x reports:

- A short count with no error (a packet past the send buffer
  mid-call, or a later send failing with ENOBUFS): the remainder goes
  out in the next sendmsg_x.
- EMSGSIZE: only returned when the first packet is too large, before
  the kernel takes any, so that packet alone goes through Write, which
  reports it, and the rest are batched again.
- ENOSYS, EPERM, EOPNOTSUPP: sendmsg_x is private API, so WriteBatch
  logs once and falls back to writev per packet for good.
- Anything else: sendmsg_x returns the error without the count it
  took, so the call is reported rather than retried, which could
  deliver packets twice.

One loss mode has no userspace fix. sendit_x counts each packet as
sent once it is copied into an mbuf; if a later allocation fails, it
frees the copied prefix unsent, returns its length, and sendmsg_x
drops the ENOBUFS because the count is nonzero. That looks exactly
like a real short count, so under mbuf exhaustion WriteBatch silently
drops packets that writev would have delivered.

The iOS tun path (tun_ios.go) is unchanged.

Inside a macOS Network Extension, download goes from 640 to 832 Mbps
against the recvmsg_x change alone in three paired rounds, at 15% less
CPU per Mbps; the likely cause is that its utun charges more per write
than a raw one. Raw dnclient already runs download near line rate,
and there the CPU difference is within noise.

TestTunWriteBatch* round-trip through a connected AF_UNIX datagram
socketpair, which takes sendmsg_x the same way, over both the batched
and the fallback path: order, AF prefixes, skipped invalid packets,
and an oversize packet mid-call and first-in-call. Dropping Namelen
from msghdrX fails them. Mutation testing with gremlins leaves only
equivalent survivors in WriteBatch, plus which error is reported first
when several fail.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-09-24 10:04:03 -05:00
Caleb JasikandClaude Opus 5.5 a33a6356c6 udp/darwin: batch receives with recvmsg_x
ListenOut drains the socket with recvmsg_x, xnu's private batched
recvmsg (SYS_RECVMSG_X, bsd/sys/socket_private.h), up to 64 datagrams
per syscall, and calls flush once per batch instead of once per packet.
Each msghdr_x carries its own sockaddr, so this works on the shared
unconnected socket. The send side stays on sendto: xnu only batches
sendmsg_x through the stack on connected sockets, and on an unconnected
socket like this one it falls back to one sendit per message, with
msg_name documented as unsupported.

recvmsg_x is private, so ListenOut falls back to one
ReadFromUDPAddrPort per datagram, logging once, if the kernel or a
sandbox refuses it (ENOSYS, EPERM, EOPNOTSUPP) or if a batch comes back
in a shape intact msghdr_x entries can't produce: more datagrams than
headers, a length past MTU, or a sender that isn't a matching
AF_INET/AF_INET6 sockaddr. That batch is dropped rather than delivered. IPv6 sources now arrive without their
zone, matching the Linux recvmmsg path; WriteTo already drops it.

macOS raw dnclient to a Windows peer on the same gigabit LAN, iperf3
10 s, median of 3 alternating rounds against 7cfa47d:

  download, 1/4/8 streams  606/600/604 -> 869/873/863 Mbps
  download CPU             ~159% -> ~123%
  upload                   340 -> 323 Mbps
  UDP 500M loss            0.32% -> 0.31%

Download is now close to the 902 Mbps the LAN gives without a tunnel.

TestMsghdrXKernelRoundTrip and FuzzMsghdrXKernelRoundTrip pin msghdrX
against the kernel's struct msghdr_x, which the SDK doesn't ship: they
round-trip bursts through recvmsg_x on loopback and check every field
the kernel writes. recvmsg_x never reports MSG_TRUNC (soreceive_m_list
doesn't set it), so a datagram past MTU arrives cut to MTU with Flags
0, the same as ReadFromUDP. TestListenOutSingleFallback covers the
fallback loop, TestCheckMsghdrX the shape check, and the round trip
asserts the check accepts every batch the kernel returns.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-09-23 16:30:55 -05:00
123 changed files with 3277 additions and 7282 deletions

No files matched your search

-2
View File
@@ -1,2 +0,0 @@
# Goldens are compared byte for byte, so they must come out of git the way they went in.
*.golden -text
+3 -3
View File
@@ -14,7 +14,7 @@ jobs:
- uses: actions/setup-go@v7
with:
go-version: '1.27'
go-version: '1.26'
check-latest: true
- name: Build
@@ -40,7 +40,7 @@ jobs:
- uses: actions/setup-go@v7
with:
go-version: '1.27'
go-version: '1.26'
check-latest: true
- name: Build
@@ -83,7 +83,7 @@ jobs:
- uses: actions/setup-go@v7
with:
go-version: '1.27'
go-version: '1.26'
check-latest: true
# GitHub holds ARNs, not credentials, and ARNs outlive a rotation
+3 -3
View File
@@ -34,7 +34,7 @@ jobs:
- uses: actions/setup-go@v7
with:
go-version: '1.27'
go-version: '1.26'
check-latest: true
- name: add hashicorp source
@@ -66,7 +66,7 @@ jobs:
- uses: actions/setup-go@v7
with:
go-version: '1.27'
go-version: '1.26'
check-latest: true
- name: add hashicorp source
@@ -92,7 +92,7 @@ jobs:
- uses: actions/setup-go@v7
with:
go-version: '1.27'
go-version: '1.26'
check-latest: true
# WSL2 + Ubuntu so the smoke can run a real linux peer with its own
+2 -2
View File
@@ -22,7 +22,7 @@ jobs:
- uses: actions/setup-go@v7
with:
go-version: '1.27'
go-version: '1.26'
check-latest: true
- name: Smoke Docker
@@ -51,7 +51,7 @@ jobs:
- uses: actions/setup-go@v7
with:
go-version: '1.27'
go-version: '1.26'
check-latest: true
- name: build
+4 -4
View File
@@ -22,7 +22,7 @@ jobs:
- uses: actions/setup-go@v7
with:
go-version: '1.27'
go-version: '1.26'
check-latest: true
- name: Install goimports
@@ -42,7 +42,7 @@ jobs:
- name: golangci-lint
uses: golangci/golangci-lint-action@v9
with:
version: v2.14
version: v2.12
test:
name: Test ${{ matrix.name }}
@@ -87,7 +87,7 @@ jobs:
- uses: actions/setup-go@v7
with:
go-version: '1.27'
go-version: '1.26'
check-latest: true
- name: Build
@@ -132,7 +132,7 @@ jobs:
- uses: actions/setup-go@v7
with:
go-version: '1.27'
go-version: '1.26'
check-latest: true
- name: Build ${{ matrix.name }}
-14
View File
@@ -7,20 +7,6 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
## [Unreleased]
### Removed
- The SSH debug server's `start-cpu-profile`, `stop-cpu-profile`, `save-heap-profile`, `save-mutex-profile`, and
`mutex-profile-fraction` commands, and `sshd.sandbox_dir`, which is now ignored if set.
### Fixed
- Signing a v2 certificate with an empty name, a name longer than 253 bytes, or an empty group now fails.
These certificates were signed successfully but could not be loaded.
- `create-tunnel -address <ip:port>` panicked on a nil RemoteList and, over the ssh debug server, took nebula
down with it. A hostinfo returned by StartHandshake had no RemoteList until the handshake loop's first
pass attached one, and `create-tunnel -address` set the remote before that. The list is now attached when
the handshake starts, so a pending hostinfo never exists without one.
## [1.11.1] - 2026-08-21
See the [v1.11.1](https://github.com/slackhq/nebula/milestone/30?closed=1) milestone for a complete list of changes.
+1 -10
View File
@@ -389,16 +389,7 @@ func (c *certificateV2) fromTBSCertificate(t *TBSCertificate) error {
}
func (c *certificateV2) validate() error {
// Mirror the name and group rules in unmarshalDetails so signing fails instead of producing an unparseable certificate
if c.details.name == "" || len(c.details.name) > MaxNameLength {
return NewErrInvalidCertificateProperties("name must be between 1 and %d bytes", MaxNameLength)
}
for _, group := range c.details.groups {
if group == "" {
return NewErrInvalidCertificateProperties("groups may not be empty")
}
}
// Empty names are allowed
if len(c.publicKey) == 0 {
return ErrInvalidPublicKey
-45
View File
@@ -6,7 +6,6 @@ import (
"crypto/elliptic"
"crypto/rand"
"net/netip"
"strings"
"testing"
"time"
@@ -136,47 +135,3 @@ func TestCertificate_SignP256_AlwaysNormalized(t *testing.T) {
assert.True(t, normie)
}
}
func TestCertificateV2_SignRejectsUnparseable(t *testing.T) {
_, priv, err := ed25519.GenerateKey(rand.Reader)
require.NoError(t, err)
var invalid *ErrInvalidCertificateProperties
newTBS := func() TBSCertificate {
return TBSCertificate{
Version: Version2,
Name: "testing",
Networks: []netip.Prefix{mustParsePrefixUnmapped("10.1.1.1/24")},
Groups: []string{"test-group1"},
NotBefore: time.Now().Add(-time.Minute),
NotAfter: time.Now().Add(time.Minute),
PublicKey: []byte("1234567890abcedfghij1234567890ab"),
Curve: Curve_CURVE25519,
IsCA: true,
}
}
tbs := newTBS()
tbs.Name = strings.Repeat("a", MaxNameLength)
c, err := tbs.Sign(nil, Curve_CURVE25519, priv)
require.NoError(t, err)
b, err := c.Marshal()
require.NoError(t, err)
_, err = unmarshalCertificateV2(b, nil, Curve_CURVE25519)
require.NoError(t, err)
tbs = newTBS()
tbs.Name = strings.Repeat("a", MaxNameLength+1)
_, err = tbs.Sign(nil, Curve_CURVE25519, priv)
require.ErrorAs(t, err, &invalid)
tbs = newTBS()
tbs.Name = ""
_, err = tbs.Sign(nil, Curve_CURVE25519, priv)
require.ErrorAs(t, err, &invalid)
tbs = newTBS()
tbs.Groups = []string{"test-group1", ""}
_, err = tbs.Sign(nil, Curve_CURVE25519, priv)
require.ErrorAs(t, err, &invalid)
}
+1 -2
View File
@@ -85,10 +85,9 @@ func main() {
fmt.Printf("failed to apply logging config: %s", err)
os.Exit(1)
}
c.RegisterReloadCallback(func(c *config.C, r *config.Reload) {
c.RegisterReloadCallback(func(c *config.C) {
if err := logging.ApplyConfig(l, c); err != nil {
l.Error("Failed to reconfigure logger on reload", "error", err)
r.Failed()
}
})
+1 -2
View File
@@ -34,10 +34,9 @@ func (p *program) Start(s service.Service) error {
if err := logging.ApplyConfig(l, c); err != nil {
return fmt.Errorf("failed to apply logging config: %s", err)
}
c.RegisterReloadCallback(func(c *config.C, r *config.Reload) {
c.RegisterReloadCallback(func(c *config.C) {
if err := logging.ApplyConfig(l, c); err != nil {
l.Error("Failed to reconfigure logger on reload", "error", err)
r.Failed()
}
})
+1 -2
View File
@@ -71,10 +71,9 @@ func main() {
fmt.Printf("failed to apply logging config: %s", err)
os.Exit(1)
}
c.RegisterReloadCallback(func(c *config.C, r *config.Reload) {
c.RegisterReloadCallback(func(c *config.C) {
if err := logging.ApplyConfig(l, c); err != nil {
l.Error("Failed to reconfigure logger on reload", "error", err)
r.Failed()
}
})
-710
View File
@@ -1,710 +0,0 @@
package nebula
import (
"bytes"
"encoding/json"
"flag"
"fmt"
"log/slog"
"maps"
"net/netip"
"sort"
"strings"
"github.com/slackhq/nebula/commands"
"github.com/slackhq/nebula/config"
"github.com/slackhq/nebula/logging"
)
// The commands nebula serves. attachCommands builds the one registry every surface
// reads. See the commands package for what a Command is.
type listHostMapFlags struct {
Json bool
Pretty bool
ByIndex bool
}
// listHostMapFlagSet is the flag set list-hostmap and list-pending-hostmap share.
func listHostMapFlagSet() (*flag.FlagSet, any) {
fl := flag.NewFlagSet("", flag.ContinueOnError)
s := listHostMapFlags{}
fl.BoolVar(&s.Json, "json", false, "outputs as json with more information")
fl.BoolVar(&s.Pretty, "pretty", false, "pretty prints json, assumes -json")
fl.BoolVar(&s.ByIndex, "by-index", false, "gets all hosts in the hostmap from the index table")
return fl, &s
}
type printCertFlags struct {
Json bool
Pretty bool
Raw bool
}
type printTunnelFlags struct {
Pretty bool
}
type changeRemoteFlags struct {
Address string
}
type closeTunnelFlags struct {
LocalOnly bool
}
type createTunnelFlags struct {
Address string
}
type deviceInfoFlags struct {
Json bool
Pretty bool
}
func attachCommands(l *slog.Logger, c *config.C, reg *commands.Registry, f *Interface) {
reg.Register(&commands.Command{
Name: commands.ListHostmap,
ShortDescription: "List all known previously connected hosts",
Flags: listHostMapFlagSet,
Callback: func(fs any, a []string, w commands.StringWriter) error {
return listHostMapCommand(f.hostMap, fs, w)
},
})
reg.Register(&commands.Command{
Name: commands.ListPendingHostmap,
ShortDescription: "List all handshaking hosts",
Flags: listHostMapFlagSet,
Callback: func(fs any, a []string, w commands.StringWriter) error {
return listHostMapCommand(f.handshakeManager, fs, w)
},
})
reg.Register(&commands.Command{
Name: commands.ListLighthouseAddrmap,
ShortDescription: "List all lighthouse map entries",
Flags: func() (*flag.FlagSet, any) {
fl := flag.NewFlagSet("", flag.ContinueOnError)
s := listHostMapFlags{}
fl.BoolVar(&s.Json, "json", false, "outputs as json with more information")
fl.BoolVar(&s.Pretty, "pretty", false, "pretty prints json, assumes -json")
return fl, &s
},
Callback: func(fs any, a []string, w commands.StringWriter) error {
return listLighthouseAddrmapCommand(f.lightHouse, fs, w)
},
})
reg.Register(&commands.Command{
Name: commands.Reload,
ShortDescription: "Reloads configuration from disk, same as sending HUP to the process",
Callback: func(fs any, a []string, w commands.StringWriter) error {
return reloadCommand(l, c, w)
},
})
reg.Register(&commands.Command{
Name: commands.LogLevel,
ShortDescription: "Gets or sets the current log level",
Callback: func(fs any, a []string, w commands.StringWriter) error {
return logLevelCommand(l, fs, a, w)
},
})
reg.Register(&commands.Command{
Name: commands.LogFormat,
ShortDescription: "Gets or sets the current log format",
Callback: func(fs any, a []string, w commands.StringWriter) error {
return logFormatCommand(l, fs, a, w)
},
})
reg.Register(&commands.Command{
Name: commands.Version,
ShortDescription: "Prints the currently running version of nebula",
Callback: func(fs any, a []string, w commands.StringWriter) error {
return versionCommand(f, fs, a, w)
},
})
reg.Register(&commands.Command{
Name: commands.DeviceInfo,
ShortDescription: "Prints information about the network device.",
Flags: func() (*flag.FlagSet, any) {
fl := flag.NewFlagSet("", flag.ContinueOnError)
s := deviceInfoFlags{}
fl.BoolVar(&s.Json, "json", false, "outputs as json with more information")
fl.BoolVar(&s.Pretty, "pretty", false, "pretty prints json, assumes -json")
return fl, &s
},
Callback: func(fs any, a []string, w commands.StringWriter) error {
return deviceInfoCommand(f, fs, w)
},
})
reg.Register(&commands.Command{
Name: commands.PrintCert,
ShortDescription: "Prints the current certificate being used or the certificate for the provided vpn addr",
Flags: func() (*flag.FlagSet, any) {
fl := flag.NewFlagSet("", flag.ContinueOnError)
s := printCertFlags{}
fl.BoolVar(&s.Json, "json", false, "outputs as json")
fl.BoolVar(&s.Pretty, "pretty", false, "pretty prints json, assumes -json")
fl.BoolVar(&s.Raw, "raw", false, "raw prints the PEM encoded certificate, not compatible with -json or -pretty")
return fl, &s
},
Callback: func(fs any, a []string, w commands.StringWriter) error {
return printCertCommand(f, fs, a, w)
},
})
reg.Register(&commands.Command{
Name: commands.PrintTunnel,
ShortDescription: "Prints json details about a tunnel for the provided vpn addr",
Flags: func() (*flag.FlagSet, any) {
fl := flag.NewFlagSet("", flag.ContinueOnError)
s := printTunnelFlags{}
fl.BoolVar(&s.Pretty, "pretty", false, "pretty prints json")
return fl, &s
},
Callback: func(fs any, a []string, w commands.StringWriter) error {
return printTunnelCommand(f, fs, a, w)
},
})
reg.Register(&commands.Command{
Name: commands.PrintRelays,
ShortDescription: "Prints json details about all relay info",
Flags: func() (*flag.FlagSet, any) {
fl := flag.NewFlagSet("", flag.ContinueOnError)
s := printTunnelFlags{}
fl.BoolVar(&s.Pretty, "pretty", false, "pretty prints json")
return fl, &s
},
Callback: func(fs any, a []string, w commands.StringWriter) error {
return printRelaysCommand(f, fs, a, w)
},
})
reg.Register(&commands.Command{
Name: commands.ChangeRemote,
ShortDescription: "Changes the remote address used in the tunnel for the provided vpn addr",
Flags: func() (*flag.FlagSet, any) {
fl := flag.NewFlagSet("", flag.ContinueOnError)
s := changeRemoteFlags{}
fl.StringVar(&s.Address, "address", "", "The new remote address, ip:port")
return fl, &s
},
Callback: func(fs any, a []string, w commands.StringWriter) error {
return changeRemoteCommand(f, fs, a, w)
},
})
reg.Register(&commands.Command{
Name: commands.CloseTunnel,
ShortDescription: "Closes a tunnel for the provided vpn addr",
Flags: func() (*flag.FlagSet, any) {
fl := flag.NewFlagSet("", flag.ContinueOnError)
s := closeTunnelFlags{}
fl.BoolVar(&s.LocalOnly, "local-only", false, "Disables notifying the remote that the tunnel is shutting down")
return fl, &s
},
Callback: func(fs any, a []string, w commands.StringWriter) error {
return closeTunnelCommand(f, fs, a, w)
},
})
reg.Register(&commands.Command{
Name: commands.CreateTunnel,
ShortDescription: "Creates a tunnel for the provided vpn address",
Help: "The lighthouses will be queried for real addresses but you can provide one as well.",
Flags: func() (*flag.FlagSet, any) {
fl := flag.NewFlagSet("", flag.ContinueOnError)
s := createTunnelFlags{}
fl.StringVar(&s.Address, "address", "", "Optionally provide a real remote address, ip:port ")
return fl, &s
},
Callback: func(fs any, a []string, w commands.StringWriter) error {
return createTunnelCommand(f, fs, a, w)
},
})
reg.Register(&commands.Command{
Name: commands.QueryLighthouse,
ShortDescription: "Query the lighthouses for the provided vpn address",
Help: "This command is asynchronous. Only currently known udp addresses will be printed.",
Callback: func(fs any, a []string, w commands.StringWriter) error {
return queryLighthouseCommand(f, fs, a, w)
},
})
}
func listHostMapCommand(hl controlHostLister, a any, w commands.StringWriter) error {
fs, ok := a.(*listHostMapFlags)
if !ok {
return fmt.Errorf("internal error: expected *listHostMapFlags but was %T", a)
}
var hm []ControlHostInfo
if fs.ByIndex {
hm = listHostMapIndexes(hl)
} else {
hm = listHostMapHosts(hl)
}
sort.Slice(hm, func(i, j int) bool {
return hm[i].VpnAddrs[0].Compare(hm[j].VpnAddrs[0]) < 0
})
if fs.Json || fs.Pretty {
js := json.NewEncoder(w.GetWriter())
if fs.Pretty {
js.SetIndent("", " ")
}
if err := js.Encode(hm); err != nil {
return err
}
} else {
for _, v := range hm {
err := w.WriteLine(fmt.Sprintf("%s: %s", v.VpnAddrs, v.RemoteAddrs))
if err != nil {
return err
}
}
}
return nil
}
func listLighthouseAddrmapCommand(lightHouse *LightHouse, a any, w commands.StringWriter) error {
fs, ok := a.(*listHostMapFlags)
if !ok {
return fmt.Errorf("internal error: expected *listHostMapFlags but was %T", a)
}
type lighthouseInfo struct {
VpnAddr string `json:"vpnAddr"`
Addrs *CacheMap `json:"addrs"`
}
lightHouse.RLock()
addrMap := make([]lighthouseInfo, len(lightHouse.addrMap))
x := 0
for k, v := range lightHouse.addrMap {
addrMap[x] = lighthouseInfo{
VpnAddr: k.String(),
Addrs: v.CopyCache(),
}
x++
}
lightHouse.RUnlock()
sort.Slice(addrMap, func(i, j int) bool {
return strings.Compare(addrMap[i].VpnAddr, addrMap[j].VpnAddr) < 0
})
if fs.Json || fs.Pretty {
js := json.NewEncoder(w.GetWriter())
if fs.Pretty {
js.SetIndent("", " ")
}
if err := js.Encode(addrMap); err != nil {
return err
}
} else {
for _, v := range addrMap {
b, err := json.Marshal(v.Addrs)
if err != nil {
return err
}
err = w.WriteLine(fmt.Sprintf("%s: %s", v.VpnAddr, string(b)))
if err != nil {
return err
}
}
}
return nil
}
// parseVpnAddr parses the vpn address a command takes as its first operand, failing to w
// when there is none or it does not parse. noun is how the command's messages name it,
// "vpn address" or "vpn addr", which the output golden pins per command.
func parseVpnAddr(a []string, noun string, w commands.StringWriter) (netip.Addr, error) {
if len(a) == 0 {
return netip.Addr{}, commands.Fail(w, "No vpn address was provided")
}
vpnAddr, err := netip.ParseAddr(a[0])
if err != nil {
return netip.Addr{}, commands.Fail(w, fmt.Sprintf("The provided %s could not be parsed: %s", noun, a[0]))
}
return vpnAddr, nil
}
func versionCommand(ifce *Interface, fs any, a []string, w commands.StringWriter) error {
return w.WriteLine(ifce.version)
}
func queryLighthouseCommand(ifce *Interface, fs any, a []string, w commands.StringWriter) error {
vpnAddr, err := parseVpnAddr(a, "vpn address", w)
if err != nil {
return err
}
var cm *CacheMap
rl := ifce.lightHouse.Query(vpnAddr)
if rl != nil {
cm = rl.CopyCache()
}
return json.NewEncoder(w.GetWriter()).Encode(cm)
}
func closeTunnelCommand(ifce *Interface, fs any, a []string, w commands.StringWriter) error {
flags, ok := fs.(*closeTunnelFlags)
if !ok {
return fmt.Errorf("internal error: expected *closeTunnelFlags but was %T", fs)
}
vpnAddr, err := parseVpnAddr(a, "vpn address", w)
if err != nil {
return err
}
hostInfo := ifce.hostMap.QueryVpnAddr(vpnAddr)
if hostInfo == nil {
return commands.Fail(w, fmt.Sprintf("Could not find tunnel for vpn address: %v", a[0]))
}
if !flags.LocalOnly {
ifce.sendCloseTunnel(hostInfo)
}
ifce.closeTunnel(hostInfo)
return w.WriteLine("Closed")
}
func createTunnelCommand(ifce *Interface, fs any, a []string, w commands.StringWriter) error {
flags, ok := fs.(*createTunnelFlags)
if !ok {
return fmt.Errorf("internal error: expected *createTunnelFlags but was %T", fs)
}
vpnAddr, err := parseVpnAddr(a, "vpn address", w)
if err != nil {
return err
}
hostInfo := ifce.hostMap.QueryVpnAddr(vpnAddr)
if hostInfo != nil {
return commands.Fail(w, "Tunnel already exists")
}
hostInfo = ifce.handshakeManager.QueryVpnAddr(vpnAddr)
if hostInfo != nil {
return commands.Fail(w, "Tunnel already handshaking")
}
var addr netip.AddrPort
if flags.Address != "" {
addr, err = netip.ParseAddrPort(flags.Address)
if err != nil {
return commands.Fail(w, "Address could not be parsed")
}
}
// Set the remote from the callback, which StartHandshake runs under the handshake manager lock
// before the hostinfo reaches the handshake loop or the static-host trigger, so the address is
// in the RemoteList before the first handshake is sent.
ifce.handshakeManager.StartHandshake(vpnAddr, func(hh *HandshakeHostInfo) {
if addr.IsValid() {
hh.hostinfo.SetRemote(addr)
}
})
return w.WriteLine("Created")
}
func changeRemoteCommand(ifce *Interface, fs any, a []string, w commands.StringWriter) error {
flags, ok := fs.(*changeRemoteFlags)
if !ok {
return fmt.Errorf("internal error: expected *changeRemoteFlags but was %T", fs)
}
vpnAddr, err := parseVpnAddr(a, "vpn address", w)
if err != nil {
return err
}
if flags.Address == "" {
return commands.Fail(w, "No address was provided")
}
addr, err := netip.ParseAddrPort(flags.Address)
if err != nil {
return commands.Fail(w, "Address could not be parsed")
}
hostInfo := ifce.hostMap.QueryVpnAddr(vpnAddr)
if hostInfo == nil {
return commands.Fail(w, fmt.Sprintf("Could not find tunnel for vpn address: %v", a[0]))
}
hostInfo.SetRemote(addr)
return w.WriteLine("Changed")
}
func logLevelCommand(l *slog.Logger, fs any, a []string, w commands.StringWriter) error {
ctrl, ok := l.Handler().(interface {
GetLevel() slog.Level
SetLevel(slog.Level)
})
if !ok {
return commands.Fail(w, "Log level is not reconfigurable on this logger")
}
if len(a) == 0 {
return w.WriteLine(fmt.Sprintf("Log level is: %s", logging.LevelName(ctrl.GetLevel())))
}
level, err := logging.ParseLevel(strings.ToLower(a[0]))
if err != nil {
return commands.Fail(w, fmt.Sprintf("Unknown log level %s. Possible log levels: trace, debug, info, warn, error", a))
}
ctrl.SetLevel(level)
return w.WriteLine(fmt.Sprintf("Log level is: %s", logging.LevelName(ctrl.GetLevel())))
}
func logFormatCommand(l *slog.Logger, fs any, a []string, w commands.StringWriter) error {
ctrl, ok := l.Handler().(interface {
GetFormat() string
SetFormat(string) error
})
if !ok {
return commands.Fail(w, "Log format is not reconfigurable on this logger")
}
if len(a) == 0 {
return w.WriteLine(fmt.Sprintf("Log format is: %s", ctrl.GetFormat()))
}
if err := ctrl.SetFormat(strings.ToLower(a[0])); err != nil {
return commands.Fail(w, fmt.Sprintf("Unable to set log format: %s", err))
}
return w.WriteLine(fmt.Sprintf("Log format is: %s", ctrl.GetFormat()))
}
func printCertCommand(ifce *Interface, fs any, a []string, w commands.StringWriter) error {
args, ok := fs.(*printCertFlags)
if !ok {
return fmt.Errorf("internal error: expected *printCertFlags but was %T", fs)
}
cert := ifce.pki.getCertState().GetDefaultCertificate()
if len(a) > 0 {
vpnAddr, err := parseVpnAddr(a, "vpn addr", w)
if err != nil {
return err
}
hostInfo := ifce.hostMap.QueryVpnAddr(vpnAddr)
if hostInfo == nil {
return commands.Fail(w, fmt.Sprintf("Could not find tunnel for vpn addr: %v", a[0]))
}
cert = hostInfo.GetCert().Certificate
}
if args.Json || args.Pretty {
b, err := cert.MarshalJSON()
if err != nil {
return commands.Fail(w, fmt.Sprintf("Unable to marshal the certificate: %s", err))
}
if args.Pretty {
buf := new(bytes.Buffer)
if err := json.Indent(buf, b, "", " "); err != nil {
return commands.Fail(w, fmt.Sprintf("Unable to marshal the certificate: %s", err))
}
b = buf.Bytes()
}
return w.WriteBytes(b)
}
if args.Raw {
b, err := cert.MarshalPEM()
if err != nil {
return commands.Fail(w, fmt.Sprintf("Unable to marshal the certificate: %s", err))
}
return w.WriteBytes(b)
}
return w.WriteLine(cert.String())
}
func printRelaysCommand(ifce *Interface, fs any, a []string, w commands.StringWriter) error {
args, ok := fs.(*printTunnelFlags)
if !ok {
return fmt.Errorf("internal error: expected *printTunnelFlags but was %T", fs)
}
ifce.hostMap.RLock()
relays := maps.Clone(ifce.hostMap.Relays)
ifce.hostMap.RUnlock()
type RelayFor struct {
Error string `json:",omitempty"`
Type string
State string
PeerAddr netip.Addr
LocalIndex uint32
RemoteIndex uint32
RelayedThrough []netip.Addr
}
type RelayOutput struct {
NebulaAddr netip.Addr
RelayForAddrs []RelayFor
}
type CmdOutput struct {
Relays []*RelayOutput
}
co := CmdOutput{}
enc := json.NewEncoder(w.GetWriter())
if args.Pretty {
enc.SetIndent("", " ")
}
for k, v := range relays {
ro := RelayOutput{NebulaAddr: v.vpnAddrs[0]}
co.Relays = append(co.Relays, &ro)
relayHI := ifce.hostMap.QueryVpnAddr(v.vpnAddrs[0])
if relayHI == nil {
ro.RelayForAddrs = append(ro.RelayForAddrs, RelayFor{Error: "could not find hostinfo"})
continue
}
for _, vpnAddr := range relayHI.relayState.CopyRelayForIps() {
rf := RelayFor{}
r, ok := relayHI.relayState.GetRelayForByAddr(vpnAddr)
if ok {
t := ""
switch r.Type {
case ForwardingType:
t = "forwarding"
case TerminalType:
t = "terminal"
default:
t = "unknown"
}
s := ""
switch r.State {
case Requested:
s = "requested"
case Established:
s = "established"
default:
s = "unknown"
}
rf.LocalIndex = r.LocalIndex
rf.RemoteIndex = r.RemoteIndex
rf.PeerAddr = r.PeerAddr
rf.Type = t
rf.State = s
if rf.LocalIndex != k {
rf.Error = fmt.Sprintf("hostmap LocalIndex '%v' does not match RelayState LocalIndex", k)
}
}
relayedHI := ifce.hostMap.QueryVpnAddr(vpnAddr)
if relayedHI != nil {
rf.RelayedThrough = append(rf.RelayedThrough, relayedHI.relayState.CopyRelayIps()...)
}
ro.RelayForAddrs = append(ro.RelayForAddrs, rf)
}
}
return enc.Encode(co)
}
func printTunnelCommand(ifce *Interface, fs any, a []string, w commands.StringWriter) error {
args, ok := fs.(*printTunnelFlags)
if !ok {
return fmt.Errorf("internal error: expected *printTunnelFlags but was %T", fs)
}
vpnAddr, err := parseVpnAddr(a, "vpn addr", w)
if err != nil {
return err
}
hostInfo := ifce.hostMap.QueryVpnAddr(vpnAddr)
if hostInfo == nil {
return commands.Fail(w, fmt.Sprintf("Could not find tunnel for vpn addr: %v", a[0]))
}
enc := json.NewEncoder(w.GetWriter())
if args.Pretty {
enc.SetIndent("", " ")
}
return enc.Encode(copyHostInfo(hostInfo, ifce.hostMap.GetPreferredRanges()))
}
func deviceInfoCommand(ifce *Interface, fs any, w commands.StringWriter) error {
flags, ok := fs.(*deviceInfoFlags)
if !ok {
return fmt.Errorf("internal error: expected flags to be deviceInfoFlags but was %+v", fs)
}
data := struct {
Name string `json:"name"`
Cidr []netip.Prefix `json:"cidr"`
}{
Name: ifce.inside.Name(),
Cidr: make([]netip.Prefix, len(ifce.inside.Networks())),
}
copy(data.Cidr, ifce.inside.Networks())
if flags.Json || flags.Pretty {
js := json.NewEncoder(w.GetWriter())
if flags.Pretty {
js.SetIndent("", " ")
}
return js.Encode(data)
} else {
return w.WriteLine(fmt.Sprintf("name=%v cidr=%v", data.Name, data.Cidr))
}
}
// reloadCommand reloads the config and writes the result to the client. It reloads even if the client has gone away
func reloadCommand(l *slog.Logger, c *config.C, w commands.StringWriter) error {
writeErr := w.WriteLine("Reloading config")
res := c.ReloadConfig()
res.Log(l)
if err := w.WriteLine(res.String()); writeErr == nil {
writeErr = err
}
if writeErr != nil {
return writeErr
}
if res.Err != nil || res.Failed {
return &commands.Failure{Msg: res.String()}
}
return nil
}
-83
View File
@@ -1,83 +0,0 @@
package commands
import (
"flag"
)
// CommandFlags is called before help or command execution to parse command line flags.
// It should return a flag.FlagSet instance and a pointer to the struct that will contain parsed flags
type CommandFlags func() (*flag.FlagSet, any)
// CommandCallback is called when your command should execute.
// fs will be a pointer to the struct provided by Command.Flags callback, if there was one. -h and -help are reserved
// and handled automatically for you.
// a will be any unconsumed arguments, if no Command.Flags was available this will be all the flags passed in.
// w is the writer to use when sending messages back to the client.
// An error returned by the callback is handed back to whoever dispatched the command, which reports a failure: exit
// status 1 over ssh. The error is not shown to the user. For a failure the user caused or can act on, write the
// message and return it as a *Failure, which Fail does in one step; the surface then reports the failure without
// logging what the user was already told. Any other error is logged by the surface as well.
type CommandCallback func(fs any, a []string, w StringWriter) error
type Command struct {
Name Name
ShortDescription string
Help string
Flags CommandFlags
Callback CommandCallback
}
// Failure is the error a command returns for a failure it has already explained to the user:
// the message it wrote is the whole story. A surface reports it as a failure and does not
// log it.
type Failure struct {
Msg string
}
func (f *Failure) Error() string {
return f.Msg
}
// Fail writes msg to w and returns it as a *Failure, so a command reports a failure to the
// user and to its surface in one line. If the write itself fails, that error is returned
// instead: the user was not told anything.
func Fail(w StringWriter, msg string) error {
if err := w.WriteLine(msg); err != nil {
return err
}
return &Failure{Msg: msg}
}
func execCommand(c *Command, args []string, w StringWriter) error {
var (
fl *flag.FlagSet
fs any
)
if c.Flags != nil {
fl, fs = c.Flags()
if fl != nil {
// SetOutput() here in case fl.Parse dumps usage.
fl.SetOutput(w.GetWriter())
err := fl.Parse(args)
if err != nil {
// fl.Parse has dumped error information to the user via the w writer.
return err
}
args = fl.Args()
}
}
return c.Callback(fs, args, w)
}
func checkHelpArgs(args []string) bool {
for _, a := range args {
if a == "-h" || a == "-help" {
return true
}
}
return false
}
-28
View File
@@ -1,28 +0,0 @@
package commands
// Name identifies a command. Every command nebula serves is a constant here, so a
// surface, a client and a test spell it the same way and are told at compile time when
// they do not. It is a string rather than an integer so a test can register a throwaway
// command without adding it here, and so the wire carries the name as the string it has
// always been.
type Name string
const (
ChangeRemote Name = "change-remote"
CloseTunnel Name = "close-tunnel"
CreateTunnel Name = "create-tunnel"
DeviceInfo Name = "device-info"
Help Name = "help"
ListHostmap Name = "list-hostmap"
ListLighthouseAddrmap Name = "list-lighthouse-addrmap"
ListPendingHostmap Name = "list-pending-hostmap"
LogFormat Name = "log-format"
LogLevel Name = "log-level"
Logout Name = "logout"
PrintCert Name = "print-cert"
PrintRelays Name = "print-relays"
PrintTunnel Name = "print-tunnel"
QueryLighthouse Name = "query-lighthouse"
Reload Name = "reload"
Version Name = "version"
)
-181
View File
@@ -1,181 +0,0 @@
package commands
import (
"cmp"
"fmt"
"maps"
"slices"
"strings"
"sync"
"github.com/anmitsu/go-shlex"
)
// Registry holds a set of commands. New is the only way to make one.
//
// It is safe for concurrent use. Commands may be registered while a surface is serving
// from the registry: the ssh server clones it per session, and a clone may overlap a
// Register.
type Registry struct {
mu sync.RWMutex
commands map[Name]*Command
}
// New returns an empty Registry with only `help` available.
func New() *Registry {
r := &Registry{commands: map[Name]*Command{}}
r.registerHelp()
return r
}
func (r *Registry) registerHelp() {
r.Register(&Command{
Name: Help,
ShortDescription: "prints available commands or help <command> for specific usage info",
Callback: func(a any, args []string, w StringWriter) error {
return r.help(args, w)
},
})
}
// Register adds a command that can be run by a user. A command registered under a name
// already held replaces it; see Clone for what that means for Help.
func (r *Registry) Register(c *Command) {
r.mu.Lock()
defer r.mu.Unlock()
r.commands[c.Name] = c
}
// Get returns the command registered under name, or nil if there is no such command.
func (r *Registry) Get(name Name) *Command {
r.mu.RLock()
defer r.mu.RUnlock()
return r.commands[name]
}
// Match returns the names of every command starting with prefix, sorted, as strings for
// a prompt to complete and print.
func (r *Registry) Match(prefix string) []string {
cmds := make([]string, 0)
r.mu.RLock()
for n := range r.commands {
if strings.HasPrefix(string(n), prefix) {
cmds = append(cmds, string(n))
}
}
r.mu.RUnlock()
slices.Sort(cmds)
return cmds
}
// All returns every registered command sorted by name, which is the order help lists them.
func (r *Registry) All() []*Command {
r.mu.RLock()
defer r.mu.RUnlock()
cmds := slices.Collect(maps.Values(r.commands))
slices.SortFunc(cmds, func(a, b *Command) int { return cmp.Compare(a.Name, b.Name) })
return cmds
}
// Clone returns a copy holding the same commands, with help bound to the copy: a
// command registered on the clone alone is listed and described there, and one the
// clone withholds is not. That rebinding replaces whatever was registered under Help on
// the source, built-in or not.
func (r *Registry) Clone() *Registry {
r.mu.RLock()
c := &Registry{commands: maps.Clone(r.commands)}
r.mu.RUnlock()
c.registerHelp()
return c
}
// Dispatch parses a command line and runs it, reporting problems to w. The error is for
// the caller to log, not to show; see CommandCallback.
func (r *Registry) Dispatch(line string, w StringWriter) error {
// A line shlex cannot split, an unbalanced quote.
args, err := shlex.Split(line, true)
if err != nil {
return Fail(w, "could not parse the command line: "+err.Error())
}
return r.DispatchArgs(args, w)
}
// DispatchArgs runs an already tokenized command line. The error is as for Dispatch.
func (r *Registry) DispatchArgs(args []string, w StringWriter) error {
if len(args) == 0 {
r.dumpCommands(w)
return nil
}
c := r.Get(Name(args[0]))
if c == nil {
// Only the first word was looked up, so only it is named.
msg := fmt.Sprintf("did not understand: %s", args[0])
if err := w.WriteLine(msg); err != nil {
return err
}
r.dumpCommands(w)
return &Failure{Msg: msg}
}
if checkHelpArgs(args) {
// Through the registered help command, so -h and `help <name>` are one path.
return execCommand(r.Get(Help), []string{string(c.Name)}, w)
}
return execCommand(c, args[1:], w)
}
// dumpCommands writes the list of available commands to w.
func (r *Registry) dumpCommands(w StringWriter) {
err := w.WriteLine("Available commands:")
if err != nil {
return
}
// In the order All gives, which is the display order.
cmds := make([]string, 0)
for _, l := range r.All() {
cmds = append(cmds, fmt.Sprintf("%s - %s", l.Name, l.ShortDescription))
}
_ = w.Write(strings.Join(cmds, "\n") + "\n\n")
}
// help writes the command list, or usage for the single command named in a.
func (r *Registry) help(a []string, w StringWriter) error {
// Just typed help
if len(a) == 0 {
r.dumpCommands(w)
return nil
}
// We are printing a specific commands help text
cmd := r.Get(Name(a[0]))
if cmd == nil {
return Fail(w, "Command not available "+a[0])
}
if err := w.WriteLine(fmt.Sprintf("%s - %s", cmd.Name, cmd.ShortDescription)); err != nil {
return err
}
if cmd.Help != "" {
if err := w.WriteLine(fmt.Sprintf(" %s", cmd.Help)); err != nil {
return err
}
}
if cmd.Flags != nil {
fs, _ := cmd.Flags()
if fs != nil {
fs.SetOutput(w.GetWriter())
fs.PrintDefaults()
}
}
return nil
}
-176
View File
@@ -1,176 +0,0 @@
package commands
import (
"bytes"
"errors"
"flag"
"strings"
"testing"
"github.com/stretchr/testify/assert"
"github.com/stretchr/testify/require"
)
func testRegistry() *Registry {
r := New()
r.Register(&Command{
Name: "served",
ShortDescription: "a command this surface serves",
Callback: func(fs any, a []string, w StringWriter) error {
return w.WriteLine("read " + strings.Join(a, ","))
},
})
r.Register(&Command{
Name: "withheld",
ShortDescription: "a command this surface withholds",
Callback: func(fs any, a []string, w StringWriter) error {
return w.WriteLine("wrote")
},
})
return r
}
// TestFlagUsageGoesToTheWriter pins that a parse failure's usage lands on the command's
// writer.
func TestFlagUsageGoesToTheWriter(t *testing.T) {
r := New()
r.Register(&Command{
Name: "emit",
ShortDescription: "emits",
Flags: func() (*flag.FlagSet, any) {
fl := flag.NewFlagSet("", flag.ContinueOnError)
fl.Bool("json", false, "emit json")
return fl, nil
},
Callback: func(fs any, a []string, w StringWriter) error { return nil },
})
merged := &bytes.Buffer{}
require.Error(t, r.DispatchArgs([]string{"emit", "-nope"}, NewStringWriter(merged)))
assert.Contains(t, merged.String(), "flag provided but not defined")
}
// TestDispatchReportsUnparseableLine: a line shlex rejects, an unbalanced quote, is a
// failure the user is told about.
func TestDispatchReportsUnparseableLine(t *testing.T) {
out := &bytes.Buffer{}
err := testRegistry().Dispatch(`served "unterminated`, NewStringWriter(out))
var f *Failure
require.ErrorAs(t, err, &f)
assert.Equal(t, f.Msg+"\n", out.String())
assert.Contains(t, out.String(), "could not parse the command line: ")
}
// TestFailTellsTheUserAndTheSurface: Fail writes the message and returns it as a Failure;
// when the write fails, the user heard nothing, so the write error is what comes back.
func TestFailTellsTheUserAndTheSurface(t *testing.T) {
out := &bytes.Buffer{}
err := Fail(NewStringWriter(out), "no such tunnel")
var f *Failure
require.ErrorAs(t, err, &f)
assert.Equal(t, "no such tunnel", f.Msg)
assert.Equal(t, "no such tunnel\n", out.String())
err = Fail(NewStringWriter(failingWriter{}), "no such tunnel")
require.EqualError(t, err, "gone")
assert.NotErrorAs(t, err, &f)
}
type failingWriter struct{}
func (failingWriter) Write([]byte) (int, error) { return 0, errors.New("gone") }
// TestAllSortsByName: registration order does not matter.
func TestAllSortsByName(t *testing.T) {
r := New()
for _, n := range []Name{"zz", Version, "aa", ChangeRemote} {
r.Register(&Command{Name: n})
}
var got []Name
for _, c := range r.All() {
got = append(got, c.Name)
}
assert.Equal(t, []Name{"aa", ChangeRemote, Help, Version, "zz"}, got)
}
// TestHelpFlagAgreesWithHelpCommand pins that -h answers through the registered help
// command, and that help on a clone describes the clone: a command registered only there
// is known to both -h and `help <name>`, and one withheld from it is known to neither.
func TestHelpFlagAgreesWithHelpCommand(t *testing.T) {
r := testRegistry()
c := r.Clone()
c.Register(&Command{
Name: Logout,
ShortDescription: "ends the session",
Callback: func(fs any, a []string, w StringWriter) error { return nil },
})
flag := &bytes.Buffer{}
c.Dispatch("logout -h", NewStringWriter(flag))
cmd := &bytes.Buffer{}
c.Dispatch("help logout", NewStringWriter(cmd))
assert.Equal(t, cmd.String(), flag.String())
assert.Equal(t, "logout - ends the session\n", flag.String())
// The source never learns of it.
src := &bytes.Buffer{}
r.Dispatch("help logout", NewStringWriter(src))
assert.Equal(t, "Command not available logout\n", src.String())
// And a command both hold is described either way.
flag.Reset()
c.Dispatch("served -h", NewStringWriter(flag))
assert.Equal(t, "served - a command this surface serves\n", flag.String())
}
// TestCloneHelpListsTheClone: the command list help prints is the clone's, so a clone
// that withholds a command does not name it, and the source still does.
func TestCloneHelpListsTheClone(t *testing.T) {
r := testRegistry()
c := New()
c.Register(r.Get("served"))
c = c.Clone()
out := &bytes.Buffer{}
c.Dispatch("help", NewStringWriter(out))
assert.Equal(t, "Available commands:\n"+
"help - prints available commands or help <command> for specific usage info\n"+
"served - a command this surface serves\n\n", out.String())
out.Reset()
c.Dispatch("help withheld", NewStringWriter(out))
assert.Equal(t, "Command not available withheld\n", out.String())
out.Reset()
r.Dispatch("help withheld", NewStringWriter(out))
assert.Equal(t, "withheld - a command this surface withholds\n", out.String())
}
// TestDispatchReturnsTheCommandsError: what the callback returns reaches the caller, so
// a surface can log it.
func TestDispatchReturnsTheCommandsError(t *testing.T) {
r := New()
r.Register(&Command{
Name: "fails",
Callback: func(fs any, a []string, w StringWriter) error {
return errors.New("boom")
},
})
out := &bytes.Buffer{}
require.EqualError(t, r.Dispatch("fails", NewStringWriter(out)), "boom")
assert.Empty(t, out.String(), "a command's own error is not shown; the command speaks for itself")
}
// TestUnknownCommandNamesTheWord: only the first word is looked up, so only it is
// reported, followed by the command list, and the line is a failure to the surface.
func TestUnknownCommandNamesTheWord(t *testing.T) {
out := &bytes.Buffer{}
err := testRegistry().Dispatch(`nope "with args"`, NewStringWriter(out))
var f *Failure
require.ErrorAs(t, err, &f)
assert.Equal(t, "did not understand: nope", f.Msg)
assert.True(t, strings.HasPrefix(out.String(), "did not understand: nope\nAvailable commands:\n"), out.String())
}
-67
View File
@@ -1,67 +0,0 @@
package nebula
import (
"bytes"
"io"
"net/netip"
"testing"
"github.com/slackhq/nebula/commands"
"github.com/slackhq/nebula/logging"
"github.com/slackhq/nebula/test"
"github.com/stretchr/testify/assert"
"github.com/stretchr/testify/require"
)
// TestLogFormatRefusalIsShown: a format the logger does not know is reported to the user
// as a failure, rather than returned bare, which over ssh was silence.
func TestLogFormatRefusalIsShown(t *testing.T) {
l := logging.NewLogger(io.Discard)
out := &bytes.Buffer{}
w := commands.NewStringWriter(out)
var f *commands.Failure
require.ErrorAs(t, logFormatCommand(l, nil, []string{"bogus"}, w), &f)
assert.Equal(t, "Unable to set log format: unknown log format `bogus`. possible formats: [text json]\n", out.String())
out.Reset()
require.NoError(t, logFormatCommand(l, nil, []string{"JSON"}, w))
assert.Equal(t, "Log format is: json\n", out.String())
}
// TestPrintRelaysReportsErrorsAsText: the Error field was an error value, which encodes
// as {} and lost the message. It is the message now, and absent when there is none.
func TestPrintRelaysReportsErrorsAsText(t *testing.T) {
l := test.NewLogger()
hm := newHostMap(l)
relay := netip.MustParseAddr("10.0.0.1")
peer := netip.MustParseAddr("10.0.0.2")
// A relay host that is in Relays but not in Hosts, so its hostinfo cannot be found.
hm.Relays[1] = &HostInfo{vpnAddrs: []netip.Addr{relay}}
ifce := &Interface{hostMap: hm}
out := &bytes.Buffer{}
require.NoError(t, printRelaysCommand(ifce, &printTunnelFlags{}, nil, commands.NewStringWriter(out)))
assert.JSONEq(t, `{"Relays":[{"NebulaAddr":"10.0.0.1","RelayForAddrs":[{"Error":"could not find hostinfo","Type":"","State":"","PeerAddr":"","LocalIndex":0,"RemoteIndex":0,"RelayedThrough":null}]}]}`, out.String())
// The same relay host, found, relaying for a peer whose index matches: no Error key.
hi := hm.Relays[1]
r := &Relay{Type: ForwardingType, State: Established, PeerAddr: peer, LocalIndex: 1, RemoteIndex: 2}
hi.relayState = RelayState{
relayForByAddr: map[netip.Addr]*Relay{peer: r},
relayForByIdx: map[uint32]*Relay{r.LocalIndex: r},
}
hm.Hosts[relay] = hi
out.Reset()
require.NoError(t, printRelaysCommand(ifce, &printTunnelFlags{}, nil, commands.NewStringWriter(out)))
assert.JSONEq(t, `{"Relays":[{"NebulaAddr":"10.0.0.1","RelayForAddrs":[{"Type":"forwarding","State":"established","PeerAddr":"10.0.0.2","LocalIndex":1,"RemoteIndex":2,"RelayedThrough":null}]}]}`, out.String())
// And an index mismatch names it.
hm.Relays[7] = hi
delete(hm.Relays, 1)
out.Reset()
require.NoError(t, printRelaysCommand(ifce, &printTunnelFlags{}, nil, commands.NewStringWriter(out)))
assert.Contains(t, out.String(), `"Error":"hostmap LocalIndex '7' does not match RelayState LocalIndex"`)
}
+31 -40
View File
@@ -26,12 +26,9 @@ type C struct {
files []string
Settings map[string]any
oldSettings map[string]any
callbacks []func(*C, *Reload)
callbacks []func(*C)
l *slog.Logger
reloadLock sync.Mutex
// Set by the first reload that needs a restart and never cleared. Guarded by reloadLock
needsRestart bool
}
func NewC(l *slog.Logger) *C {
@@ -75,9 +72,8 @@ func (c *C) LoadString(raw string) error {
// RegisterReloadCallback stores a function to be called when a config reload is triggered. The functions registered
// here should decide if they need to make a change to the current process before making the change. HasChanged can be
// used to help decide if a change is necessary.
// These functions should return quickly or spawn their own go routine if they will take a while.
// Use r to report anything that failed or needs a restart to apply.
func (c *C) RegisterReloadCallback(f func(c *C, r *Reload)) {
// These functions should return quickly or spawn their own go routine if they will take a while
func (c *C) RegisterReloadCallback(f func(*C)) {
c.callbacks = append(c.callbacks, f)
}
@@ -148,55 +144,50 @@ func (c *C) CatchHUP(ctx context.Context) {
return
case <-ch:
c.l.Info("Caught HUP, reloading config")
c.ReloadConfig().Log(c.l)
c.ReloadConfig()
}
}
}()
}
// ReloadConfig reloads the config from the path provided to Load and runs every registered callback. A config that
// fails to load is logged here, like any other failure, and the result carries the error for the summary.
func (c *C) ReloadConfig() ReloadResult {
func (c *C) ReloadConfig() {
c.reloadLock.Lock()
defer c.reloadLock.Unlock()
c.oldSettings = make(map[string]any)
maps.Copy(c.oldSettings, c.Settings)
if err := c.Load(c.path); err != nil {
c.l.Error("Error occurred while reloading config", "config_path", c.path, "error", err)
return ReloadResult{Err: err, RestartRequired: c.needsRestart}
err := c.Load(c.path)
if err != nil {
c.l.Error("Error occurred while reloading config",
"config_path", c.path,
"error", err,
)
return
}
return c.runCallbacks()
}
// ReloadConfigString is ReloadConfig for a config held in memory rather than on disk.
func (c *C) ReloadConfigString(raw string) ReloadResult {
c.reloadLock.Lock()
defer c.reloadLock.Unlock()
c.oldSettings = make(map[string]any)
maps.Copy(c.oldSettings, c.Settings)
if err := c.LoadString(raw); err != nil {
c.l.Error("Error occurred while reloading config", "error", err)
return ReloadResult{Err: err, RestartRequired: c.needsRestart}
}
return c.runCallbacks()
}
func (c *C) runCallbacks() ReloadResult {
r := &Reload{c: c}
for _, v := range c.callbacks {
v(c, r)
v(c)
}
}
func (c *C) ReloadConfigString(raw string) error {
c.reloadLock.Lock()
defer c.reloadLock.Unlock()
c.oldSettings = make(map[string]any)
maps.Copy(c.oldSettings, c.Settings)
err := c.LoadString(raw)
if err != nil {
return err
}
if r.restart {
c.needsRestart = true
for _, v := range c.callbacks {
v(c)
}
return ReloadResult{Failed: r.failed, RestartRequired: c.needsRestart, RestartKeys: r.keys}
return nil
}
// GetString will get the string for k or return the default d if not found or invalid
@@ -400,7 +391,7 @@ func (c *C) parse() error {
var nm map[string]any
err = yaml.Unmarshal(b, &nm)
if err != nil {
return fmt.Errorf("%s: %w", path, err)
return err
}
// We need to use WithAppendSlice so that firewall rules in separate
+2 -2
View File
@@ -19,7 +19,7 @@ func TestConfig_Load(t *testing.T) {
// invalid yaml
c := NewC(l)
os.WriteFile(filepath.Join(dir, "01.yaml"), []byte(" invalid yaml"), 0644)
require.EqualError(t, c.Load(dir), filepath.Join(dir, "01.yaml")+": yaml: unmarshal errors:\n line 1: cannot unmarshal !!str `invalid...` into map[string]interface {}")
require.EqualError(t, c.Load(dir), "yaml: unmarshal errors:\n line 1: cannot unmarshal !!str `invalid...` into map[string]interface {}")
// simple multi config merge
c = NewC(l)
@@ -129,7 +129,7 @@ func TestConfig_ReloadConfig(t *testing.T) {
os.WriteFile(filepath.Join(dir, "01.yaml"), []byte("outer:\n inner: ho"), 0644)
c.RegisterReloadCallback(func(c *C, _ *Reload) {
c.RegisterReloadCallback(func(c *C) {
done <- true
})
-98
View File
@@ -1,98 +0,0 @@
package config
import (
"context"
"fmt"
"log/slog"
"slices"
)
// ReloadResult describes how a reload went. Problems are logged where they happen, Log writes a one line summary.
type ReloadResult struct {
// Err is set when the new config could not be read or parsed, no callbacks ran
Err error
// Failed is true when a callback could not apply part of the new config
Failed bool
// RestartRequired is true once any reload has needed a restart, and stays true until the process restarts
RestartRequired bool
// RestartKeys are the keys this reload changed that only apply on a restart
RestartKeys []string
}
// Summary returns a one line summary of the reload and the level to log it at.
func (r ReloadResult) Summary() (slog.Level, string) {
switch {
case r.Err != nil && r.RestartRequired:
return slog.LevelError, "Config reload failed, the new config did not load and a restart is still required"
case r.Err != nil:
return slog.LevelError, "Config reload failed, the new config did not load"
case r.Failed && r.RestartRequired:
return slog.LevelError, "Config reload completed with errors and requires a restart to fully apply, review the logs"
case r.Failed:
return slog.LevelError, "Config reload completed with errors, review the logs"
case r.RestartRequired:
return slog.LevelWarn, "Config reload was completed but requires a restart to fully apply"
default:
return slog.LevelInfo, "Config reload complete"
}
}
// String is the summary with Err and RestartKeys included, for output other than the log.
func (r ReloadResult) String() string {
_, msg := r.Summary()
if r.Err != nil {
msg = fmt.Sprintf("%s: %v", msg, r.Err)
}
if len(r.RestartKeys) > 0 {
msg = fmt.Sprintf("%s, keys %v", msg, r.RestartKeys)
}
return msg
}
// Log writes Summary to l.
func (r ReloadResult) Log(l *slog.Logger) {
level, msg := r.Summary()
if len(r.RestartKeys) > 0 {
l.Log(context.Background(), level, msg, "keys", r.RestartKeys)
return
}
l.Log(context.Background(), level, msg)
}
// Reload is passed to each reload callback to report how applying the new config went.
type Reload struct {
c *C
failed bool
restart bool
// Changed keys that only apply on a restart, from every callback
keys []string
}
// Failed marks the reload as failed, the caller logs why. Safe to call on a nil Reload, which is what the initial load
// passes.
func (r *Reload) Failed() {
if r != nil {
r.failed = true
}
}
// RestartRequired marks the reload as needing a restart, the caller logs why. Safe to call on a nil Reload.
func (r *Reload) RestartRequired() {
if r != nil {
r.restart = true
}
}
// RestartRequiredIfChanged marks the reload as needing a restart if any of keys changed, and adds them to RestartKeys.
// Use it for keys that are only read at startup. Safe to call on a nil Reload.
func (r *Reload) RestartRequiredIfChanged(keys ...string) {
if r == nil {
return
}
for _, k := range keys {
if r.c.HasChanged(k) && !slices.Contains(r.keys, k) {
r.keys = append(r.keys, k)
r.restart = true
}
}
}
-108
View File
@@ -1,108 +0,0 @@
package config
import (
"errors"
"log/slog"
"testing"
"github.com/slackhq/nebula/test"
"github.com/stretchr/testify/assert"
"github.com/stretchr/testify/require"
)
func TestReloadConfigString(t *testing.T) {
c := NewC(test.NewLogger())
require.NoError(t, c.LoadString("a: 1"))
fail := false
ran := 0
c.RegisterReloadCallback(func(c *C, r *Reload) {
ran++
if fail {
r.Failed()
}
})
assert.Equal(t, ReloadResult{}, c.ReloadConfigString("a: 2"))
fail = true
assert.Equal(t, ReloadResult{Failed: true}, c.ReloadConfigString("a: 3"))
assert.Equal(t, 2, ran)
// A config that fails to load runs no callbacks and returns the error
res := c.ReloadConfigString("a: [")
require.Error(t, res.Err)
assert.False(t, res.Failed)
assert.Equal(t, 2, ran)
assert.Equal(t, 3, c.GetInt("a", 0))
}
func TestReloadRestartRequiredLatches(t *testing.T) {
c := NewC(test.NewLogger())
require.NoError(t, c.LoadString("a: 1\nb: 1"))
c.RegisterReloadCallback(func(c *C, r *Reload) { r.RestartRequiredIfChanged("a", "b") })
// Nothing that needs a restart changed
assert.Equal(t, ReloadResult{}, c.ReloadConfigString("a: 1\nb: 1\nc: 1"))
assert.Equal(t, ReloadResult{RestartRequired: true, RestartKeys: []string{"a"}}, c.ReloadConfigString("a: 2\nb: 1\nc: 1"))
// The restart sticks through a reload with no changes, reverting the key and a config that fails to load. Only the
// reload that changed the key lists it
assert.Equal(t, ReloadResult{RestartRequired: true}, c.ReloadConfigString("a: 2\nb: 1\nc: 1"))
assert.Equal(t, ReloadResult{RestartRequired: true, RestartKeys: []string{"a"}}, c.ReloadConfigString("a: 1\nb: 1\nc: 1"))
res := c.ReloadConfigString("a: [")
require.Error(t, res.Err)
assert.True(t, res.RestartRequired)
}
// A key reported by more than one callback is listed once
func TestReloadRestartKeysDeduped(t *testing.T) {
c := NewC(test.NewLogger())
require.NoError(t, c.LoadString("a: 1\nb: 1"))
c.RegisterReloadCallback(func(c *C, r *Reload) { r.RestartRequiredIfChanged("a") })
c.RegisterReloadCallback(func(c *C, r *Reload) { r.RestartRequiredIfChanged("a", "b") })
assert.Equal(t, []string{"a", "b"}, c.ReloadConfigString("a: 2\nb: 2").RestartKeys)
}
// A callback can require a restart without a key changing, a file the config points at may have
func TestReloadRestartRequiredWithoutAChange(t *testing.T) {
c := NewC(test.NewLogger())
require.NoError(t, c.LoadString("a: 1"))
c.RegisterReloadCallback(func(c *C, r *Reload) { r.RestartRequired() })
assert.Equal(t, ReloadResult{RestartRequired: true}, c.ReloadConfigString("a: 1"))
}
func TestReloadResultSummary(t *testing.T) {
cases := []struct {
res ReloadResult
level slog.Level
msg string
}{
{ReloadResult{}, slog.LevelInfo, "Config reload complete"},
{ReloadResult{RestartRequired: true}, slog.LevelWarn, "Config reload was completed but requires a restart to fully apply"},
{ReloadResult{Failed: true}, slog.LevelError, "Config reload completed with errors, review the logs"},
{ReloadResult{Failed: true, RestartRequired: true}, slog.LevelError, "Config reload completed with errors and requires a restart to fully apply, review the logs"},
{ReloadResult{Err: errors.New("bad yaml")}, slog.LevelError, "Config reload failed, the new config did not load"},
{ReloadResult{Err: errors.New("bad yaml"), RestartRequired: true}, slog.LevelError, "Config reload failed, the new config did not load and a restart is still required"},
}
for _, tc := range cases {
level, msg := tc.res.Summary()
assert.Equal(t, tc.level, level, tc.msg)
assert.Equal(t, tc.msg, msg)
}
res := ReloadResult{RestartRequired: true, RestartKeys: []string{"a", "b"}}
assert.Equal(t, "Config reload was completed but requires a restart to fully apply, keys [a b]", res.String())
// String includes the error
assert.Equal(t, "Config reload failed, the new config did not load: bad yaml", ReloadResult{Err: errors.New("bad yaml")}.String())
}
// The initial load passes a nil Reload
func TestReloadNilIsSafe(t *testing.T) {
var r *Reload
r.Failed()
r.RestartRequired()
r.RestartRequiredIfChanged("a")
}
+5 -4
View File
@@ -57,8 +57,7 @@ func newConnectionManagerFromConfig(l *slog.Logger, c *config.C, hm *HostMap, p
}
cm.reload(c, true)
c.RegisterReloadCallback(func(c *config.C, r *config.Reload) {
r.RestartRequiredIfChanged("timers.connection_alive_interval", "timers.pending_deletion_interval")
c.RegisterReloadCallback(func(c *config.C) {
cm.reload(c, false)
})
@@ -175,8 +174,10 @@ func (cm *connectionManager) doTrafficCheck(localIndex uint32, p, nb, out []byte
switch decision {
case deleteTunnel:
// Local delete only, clearing the lighthouse cache if this was the last hostinfo for the vpn addr
cm.intf.closeTunnel(hostinfo)
if cm.hostMap.DeleteHostInfo(hostinfo) {
// Only clearing the lighthouse cache if this is the last hostinfo for this vpn ip in the hostmap
cm.intf.lightHouse.DeleteVpnAddrs(hostinfo.vpnAddrs)
}
case closeTunnel:
cm.intf.sendCloseTunnel(hostinfo)
-3
View File
@@ -7,7 +7,6 @@ import (
"testing"
"time"
"github.com/rcrowley/go-metrics"
"github.com/slackhq/nebula/cert"
"github.com/slackhq/nebula/config"
"github.com/slackhq/nebula/overlay/overlaytest"
@@ -22,8 +21,6 @@ func newTestLighthouse() *LightHouse {
l: test.NewLogger(),
addrMap: map[netip.Addr]*RemoteList{},
queryChan: make(chan netip.Addr, 10),
// Nothing drains queryChan here, so an 11th query is dropped.
queryDropped: metrics.NilCounter{},
}
lighthouses := []netip.Addr{}
staticList := map[netip.Addr]struct{}{}
-119
View File
@@ -2,8 +2,6 @@ package nebula
import (
"net/netip"
"strconv"
"sync"
"testing"
"time"
@@ -13,7 +11,6 @@ import (
ct "github.com/slackhq/nebula/cert_test"
"github.com/slackhq/nebula/handshake"
"github.com/slackhq/nebula/header"
"github.com/slackhq/nebula/overlay"
"github.com/slackhq/nebula/test"
"github.com/slackhq/nebula/udp"
"github.com/stretchr/testify/assert"
@@ -150,122 +147,6 @@ func TestSendNoMetricsCloseTunnelKeepsRebindEpoch(t *testing.T) {
assert.True(t, hostinfo.markOut(1), "a CloseTunnel send must not consume the rebind epoch")
}
// capturingConn is a udp.Conn that records every WriteTo.
type capturingConn struct {
udp.NoopConn
writes [][]byte
addrs []netip.AddrPort
}
func (c *capturingConn) WriteTo(b []byte, addr netip.AddrPort) error {
c.writes = append(c.writes, append([]byte(nil), b...))
c.addrs = append(c.addrs, addr)
return nil
}
// TestSendNoMetricsViaRelay sends through a relay from the mtu sized buffer the cached packet flush uses. Payloads up
// to overlay.MaxMTU go out intact, anything bigger is dropped rather than outgrowing the buffer, which once panicked.
func TestSendNoMetricsViaRelay(t *testing.T) {
tests := []struct {
n int
sent bool
}{
{0, true},
{1300, true},
{overlay.MaxMTU, true},
{overlay.MaxMTU + 1, false}, // too big for the relay's tag
{mtu - 47, false}, // too big for the inner tag, this panicked
{9000, false}, // a full packet at tun.mtu 9000
}
for _, tt := range tests {
t.Run(strconv.Itoa(tt.n), func(t *testing.T) {
// One tunnel to the target, carried end to end, and one to the relay that wraps it
targetInit, targetResp := runTestHandshake(t)
relayInit, relayResp := runTestHandshake(t)
ci, err := newConnectionStateFromResult(targetInit)
require.NoError(t, err)
relayCI, err := newConnectionStateFromResult(relayInit)
require.NoError(t, err)
targetAddr := netip.MustParseAddr("10.0.0.2")
relayAddr := netip.MustParseAddr("10.0.0.3")
relayRemote := netip.MustParseAddrPort("192.0.2.1:4242")
relay := &Relay{Type: TerminalType, State: Established, LocalIndex: 5, RemoteIndex: 6, PeerAddr: targetAddr}
relayHI := &HostInfo{
vpnAddrs: []netip.Addr{relayAddr},
ConnectionState: relayCI,
relayState: RelayState{
relayForByAddr: map[netip.Addr]*Relay{targetAddr: relay},
relayForByIdx: map[uint32]*Relay{relay.LocalIndex: relay},
},
}
relayHI.remote.Store(&relayRemote)
// No remote of its own, so the send has to go via the relay
hostinfo := &HostInfo{
vpnAddrs: []netip.Addr{targetAddr},
ConnectionState: ci,
remoteIndexId: 7,
relayState: RelayState{
relays: []netip.Addr{relayAddr},
relayForByAddr: map[netip.Addr]*Relay{},
relayForByIdx: map[uint32]*Relay{},
},
}
l := test.NewLogger()
hm := newHostMap(l)
hm.Hosts[relayAddr] = relayHI
conn := &capturingConn{}
f := &Interface{
l: l,
hostMap: hm,
messageMetrics: &MessageMetrics{txExhausted: metrics.NewCounter()},
writers: []udp.Conn{conn},
}
f.connectionManager = &connectionManager{intf: f, relayUsed: map[uint32]struct{}{}, relayUsedLock: &sync.RWMutex{}}
payload := make([]byte, tt.n)
for i := range payload {
payload[i] = byte(i)
}
counter := ci.messageCounter.Load()
f.sendNoMetrics(header.Message, 0, ci, hostinfo, netip.AddrPort{}, payload, make([]byte, 12), make([]byte, mtu), 0)
if !tt.sent {
assert.Empty(t, conn.writes)
assert.Equal(t, counter, ci.messageCounter.Load(), "a dropped packet must not spend a counter")
return
}
require.Len(t, conn.writes, 1)
assert.Equal(t, relayRemote, conn.addrs[0])
pkt := conn.writes[0]
// The relay authenticates the whole packet under its own header
outer := &header.H{}
require.NoError(t, outer.Parse(pkt))
assert.Equal(t, header.MessageRelay, outer.Subtype)
assert.Equal(t, relay.RemoteIndex, outer.RemoteIndex)
relayPeer, err := newConnectionStateFromResult(relayResp)
require.NoError(t, err)
require.NoError(t, relayPeer.VerifyRelay(l, outer.MessageCounter, pkt, make([]byte, 12)))
// Inside it, the target decrypts the end to end packet back to the payload
inner := pkt[header.Len : len(pkt)-relayPeer.dKey.Overhead()]
h := &header.H{}
require.NoError(t, h.Parse(inner))
assert.Equal(t, header.Message, h.Type)
assert.Equal(t, hostinfo.remoteIndexId, h.RemoteIndex)
targetPeer, err := newConnectionStateFromResult(targetResp)
require.NoError(t, err)
got, err := targetPeer.Decrypt(l, h.MessageCounter, inner, make([]byte, 12))
require.NoError(t, err)
assert.Equal(t, payload, got)
})
}
}
func TestNewConnectionStateFromResult(t *testing.T) {
initR, respR := runTestHandshake(t)
-9
View File
@@ -11,7 +11,6 @@ import (
"syscall"
"github.com/slackhq/nebula/cert"
"github.com/slackhq/nebula/commands"
"github.com/slackhq/nebula/header"
"github.com/slackhq/nebula/overlay"
)
@@ -48,7 +47,6 @@ type Control struct {
f *Interface
l *slog.Logger
commands *commands.Registry
ctx context.Context
cancel context.CancelFunc
sshStart func()
@@ -374,13 +372,6 @@ func (c *Control) CloseAllTunnels(excludeLighthouses bool) (closed int) {
return
}
// Commands returns the registry the daemon's surfaces serve from. It is the live
// registry, not a copy: a command registered on it is served to every ssh session that
// starts afterwards. Clone it to run commands without that reach.
func (c *Control) Commands() *commands.Registry {
return c.commands
}
func (c *Control) Device() overlay.Device {
return c.f.inside
}
+3 -3
View File
@@ -151,9 +151,9 @@ func (c *fakeConn) WriteTo(_ []byte, _ netip.AddrPort) error { return nil }
func (c *fakeConn) WriteBatch(bufs [][]byte, _ []netip.AddrPort) (int, error) {
return len(bufs), nil
}
func (c *fakeConn) ReloadConfig(_ *config.C, _ *config.Reload) {}
func (c *fakeConn) SupportsMultipleReaders() bool { return true }
func (c *fakeConn) Close() error { c.closed = true; return nil }
func (c *fakeConn) ReloadConfig(_ *config.C) {}
func (c *fakeConn) SupportsMultipleReaders() bool { return true }
func (c *fakeConn) Close() error { c.closed = true; return nil }
type multiqueueDevice struct {
*fakeDevice
+1 -2
View File
@@ -69,10 +69,9 @@ func newDnsServerFromConfig(ctx context.Context, l *slog.Logger, pki *PKI, hostM
ds.mux = dns.NewServeMux()
ds.mux.HandleFunc(".", ds.handleDnsRequest)
c.RegisterReloadCallback(func(c *config.C, r *config.Reload) {
c.RegisterReloadCallback(func(c *config.C) {
if err := ds.reload(c, false); err != nil {
ds.l.Error("Failed to reload DNS responder from config", "error", err)
r.Failed()
}
})
-164
View File
@@ -1,164 +0,0 @@
//go:build e2e_testing
package e2e
import (
"bytes"
"fmt"
"path/filepath"
"regexp"
"strings"
"testing"
"time"
"github.com/slackhq/nebula/cert"
"github.com/slackhq/nebula/cert_test"
"github.com/slackhq/nebula/commands"
"github.com/slackhq/nebula/sshd"
"github.com/slackhq/nebula/test"
"github.com/stretchr/testify/require"
)
// volatile lists everything in command output that legitimately differs between runs.
// Each run mints fresh certificates and indexes, so these are replaced with a marker
// before comparison. Keep the list short: anything added here is something the golden
// stops guarding.
var volatile = []struct {
re *regexp.Regexp
with string
}{
{regexp.MustCompile(`[0-9a-f]{40,}`), "<hex>"}, // fingerprints, keys, signatures
{regexp.MustCompile(`\d{4}-\d{2}-\d{2}T\d{2}:\d{2}:\d{2}(?:\.\d+)?(?:Z|[+-]\d{2}:\d{2})`), "<time>"}, // RFC 3339
{regexp.MustCompile(`\d{4}-\d{2}-\d{2} \d{2}:\d{2}:\d{2}(?:\.\d+)? [+-]\d{4} \w+`), "<time>"}, // time.Time.String()
{regexp.MustCompile(`(?s)(-----BEGIN [A-Z ]+-----\n).*?(\n-----END [A-Z ]+-----)`), "${1}<pem>${2}"}, // print-cert -raw
{regexp.MustCompile(`(-----BEGIN [A-Z ]+-----\\n).*?(\\n-----END [A-Z ]+-----)`), "${1}<pem>${2}"}, // the same, inside a JSON string
{regexp.MustCompile(`"(localIndex|remoteIndex|messageCounter)":\d+`), `"$1":<n>`},
{regexp.MustCompile(`(?m)^(\s*"?(?:LocalIndex|RemoteIndex|localIndex|remoteIndex|messageCounter)"?:?\s*)\d+`), "${1}<n>"}, // and the -pretty form
}
func normalise(s string) string {
for _, v := range volatile {
s = v.re.ReplaceAllString(s, v.with)
}
return s
}
// outputCase is one command line to run through the ssh dispatch path.
type outputCase struct {
name string
args []string
}
// TestCommandOutput pins the bytes every command produces, in every format, through the
// ssh dispatch path. It is the safety net for moving rendering out of the commands: a
// change here is a change someone at an ssh prompt would see. Regenerate with:
//
// go test -tags e2e_testing ./e2e -run TestCommandOutput -update
func TestCommandOutput(t *testing.T) {
ca, _, caKey, _ := cert_test.NewTestCaCert(
cert.Version1, cert.Curve_CURVE25519,
time.Now(), time.Now().Add(10*time.Minute),
nil, nil, []string{},
)
control, _, _, _ := newSimpleServer(cert.Version1, ca, caKey, "output-golden", "10.222.0.1/24", nil)
control.Start()
t.Cleanup(func() { control.Stop() })
// As an ssh session does: a clone of the daemon's registry with logout added, which
// help on the clone lists and describes. There is no session to end here.
reg := control.Commands().Clone()
reg.Register(sshd.LogoutCommand(func() {}))
// run dispatches as the ssh exec path does and returns the output and the error, which
// over ssh is exit status 1.
run := func(args ...string) (string, error) {
buf := &bytes.Buffer{}
err := reg.DispatchArgs(args, commands.NewStringWriter(buf))
return buf.String(), err
}
// Seed a pending tunnel so the listing and per-address commands have something to show.
seed, err := run("create-tunnel", "10.222.0.9")
require.NoError(t, err)
require.Equal(t, "Created\n", seed, "seeding a tunnel should succeed before anything else is recorded")
cases := []outputCase{
{"version", nil},
{"device-info", nil},
{"list-hostmap", nil},
{"list-hostmap", []string{"-by-index"}},
{"list-pending-hostmap", nil},
{"list-pending-hostmap", []string{"-by-index"}},
{"list-lighthouse-addrmap", nil},
{"print-cert", nil},
{"print-cert", []string{"-raw"}},
{"print-cert", []string{"10.222.0.9"}},
{"print-cert", []string{"10.222.0.250"}},
{"print-cert", []string{"not-an-address"}},
{"print-tunnel", nil},
{"print-tunnel", []string{"10.222.0.9"}},
{"print-tunnel", []string{"10.222.0.250"}},
{"print-relays", nil},
{"query-lighthouse", nil},
{"query-lighthouse", []string{"10.222.0.9"}},
{"query-lighthouse", []string{"not-an-address"}},
// The test logger cannot change level or format, so these cases record the
// refusal each command prints on it, not a successful change.
{"log-level", nil},
{"log-level", []string{"debug"}},
{"log-level", []string{"bogus"}},
{"log-level", []string{"info"}},
{"log-format", nil},
{"log-format", []string{"json"}},
{"log-format", []string{"text"}},
{"change-remote", nil},
{"change-remote", []string{"10.222.0.9"}},
{"change-remote", []string{"-address", "10.94.0.10:4242", "10.222.0.9"}},
{"change-remote", []string{"-address", "10.94.0.10:4242", "10.222.0.250"}},
{"create-tunnel", nil},
{"create-tunnel", []string{"10.222.0.9"}},
// A fresh address, so this exercises the handshake start with a remote attached
// rather than the "already handshaking" path above.
{"create-tunnel", []string{"-address", "10.94.0.10:4242", "10.222.0.10"}},
{"create-tunnel", []string{"not-an-address"}},
{"close-tunnel", nil},
{"close-tunnel", []string{"10.222.0.250"}},
{"close-tunnel", []string{"not-an-address"}},
{"help", nil},
{"help", []string{"print-cert"}},
{"help", []string{"logout"}},
{"logout", []string{"-h"}},
{"not-a-command", []string{"10.222.0.9"}},
// reload is last so that whatever a reload does to the daemon cannot leak into an
// earlier case. In this harness it fails: the config was loaded from a string and
// has no path to re-read, which is what the recorded result says.
{"reload", nil},
}
got := &strings.Builder{}
for _, c := range cases {
for _, fmtFlags := range [][]string{nil, {"-json"}, {"-pretty"}} {
args := append([]string{c.name}, fmtFlags...)
args = append(args, c.args...)
fmt.Fprintf(got, "$ %s\n", strings.Join(args, " "))
out, err := run(args...)
out = normalise(out)
got.WriteString(out)
// Output that does not end in a newline is recorded as such, the way diff marks
// it, so the golden sees that byte too and the next prompt still starts a line.
if out != "" && !strings.HasSuffix(out, "\n") {
got.WriteString("\\ No newline at end of output\n")
}
// A failed command is recorded as the exit status an ssh caller sees, so the
// golden pins which outcomes count as failures.
if err != nil {
got.WriteString("exit status 1\n")
}
got.WriteString("\n")
}
}
test.Golden(t, filepath.Join("testdata", "commands_output.golden"), got.String())
}
+1 -1
View File
@@ -1513,7 +1513,7 @@ func TestLighthouseUpdateOnReload(t *testing.T) {
// Reload the config. The lighthouse.hosts change triggers TriggerUpdate,
// which wakes the update worker. It calls SendUpdate, initiating a
// handshake to the new lighthouse and caching the HostUpdateNotification.
require.NoError(t, myConfig.ReloadConfigString(string(newCfg)).Err)
require.NoError(t, myConfig.ReloadConfigString(string(newCfg)))
// Route until the lighthouse receives the HostUpdateNotification.
// This covers: handshake stage 1, stage 2, then the cached update.
-720
View File
@@ -1,720 +0,0 @@
$ version
e2e-test
$ version -json
e2e-test
$ version -pretty
e2e-test
$ device-info
name= cidr=[10.222.0.1/24]
$ device-info -json
{"name":"","cidr":["10.222.0.1/24"]}
$ device-info -pretty
{
"name": "",
"cidr": [
"10.222.0.1/24"
]
}
$ list-hostmap
$ list-hostmap -json
[]
$ list-hostmap -pretty
[]
$ list-hostmap -by-index
$ list-hostmap -json -by-index
[]
$ list-hostmap -pretty -by-index
[]
$ list-pending-hostmap
[10.222.0.9]: []
$ list-pending-hostmap -json
[{"vpnAddrs":["10.222.0.9"],"localIndex":<n>,"remoteIndex":<n>,"remoteAddrs":[],"cert":null,"messageCounter":<n>,"currentRemote":"","currentRelaysToMe":[],"currentRelaysThroughMe":[]}]
$ list-pending-hostmap -pretty
[
{
"vpnAddrs": [
"10.222.0.9"
],
"localIndex": <n>,
"remoteIndex": <n>,
"remoteAddrs": [],
"cert": null,
"messageCounter": <n>,
"currentRemote": "",
"currentRelaysToMe": [],
"currentRelaysThroughMe": []
}
]
$ list-pending-hostmap -by-index
$ list-pending-hostmap -json -by-index
[]
$ list-pending-hostmap -pretty -by-index
[]
$ list-lighthouse-addrmap
10.222.0.9: {}
$ list-lighthouse-addrmap -json
[{"vpnAddr":"10.222.0.9","addrs":{}}]
$ list-lighthouse-addrmap -pretty
[
{
"vpnAddr": "10.222.0.9",
"addrs": {}
}
]
$ print-cert
{
"details": {
"curve": "CURVE25519",
"groups": [],
"isCa": false,
"issuer": "<hex>",
"name": "output-golden",
"networks": [
"10.222.0.1/24"
],
"notAfter": "<time>",
"notBefore": "<time>",
"publicKey": "<hex>",
"unsafeNetworks": []
},
"fingerprint": "<hex>",
"signature": "<hex>",
"version": 1
}
$ print-cert -json
{"details":{"curve":"CURVE25519","groups":[],"isCa":false,"issuer":"<hex>","name":"output-golden","networks":["10.222.0.1/24"],"notAfter":"<time>","notBefore":"<time>","publicKey":"<hex>","unsafeNetworks":[]},"fingerprint":"<hex>","signature":"<hex>","version":1}\ No newline at end of output
$ print-cert -pretty
{
"details": {
"curve": "CURVE25519",
"groups": [],
"isCa": false,
"issuer": "<hex>",
"name": "output-golden",
"networks": [
"10.222.0.1/24"
],
"notAfter": "<time>",
"notBefore": "<time>",
"publicKey": "<hex>",
"unsafeNetworks": []
},
"fingerprint": "<hex>",
"signature": "<hex>",
"version": 1
}\ No newline at end of output
$ print-cert -raw
-----BEGIN NEBULA CERTIFICATE-----
<pem>
-----END NEBULA CERTIFICATE-----
$ print-cert -json -raw
{"details":{"curve":"CURVE25519","groups":[],"isCa":false,"issuer":"<hex>","name":"output-golden","networks":["10.222.0.1/24"],"notAfter":"<time>","notBefore":"<time>","publicKey":"<hex>","unsafeNetworks":[]},"fingerprint":"<hex>","signature":"<hex>","version":1}\ No newline at end of output
$ print-cert -pretty -raw
{
"details": {
"curve": "CURVE25519",
"groups": [],
"isCa": false,
"issuer": "<hex>",
"name": "output-golden",
"networks": [
"10.222.0.1/24"
],
"notAfter": "<time>",
"notBefore": "<time>",
"publicKey": "<hex>",
"unsafeNetworks": []
},
"fingerprint": "<hex>",
"signature": "<hex>",
"version": 1
}\ No newline at end of output
$ print-cert 10.222.0.9
Could not find tunnel for vpn addr: 10.222.0.9
exit status 1
$ print-cert -json 10.222.0.9
Could not find tunnel for vpn addr: 10.222.0.9
exit status 1
$ print-cert -pretty 10.222.0.9
Could not find tunnel for vpn addr: 10.222.0.9
exit status 1
$ print-cert 10.222.0.250
Could not find tunnel for vpn addr: 10.222.0.250
exit status 1
$ print-cert -json 10.222.0.250
Could not find tunnel for vpn addr: 10.222.0.250
exit status 1
$ print-cert -pretty 10.222.0.250
Could not find tunnel for vpn addr: 10.222.0.250
exit status 1
$ print-cert not-an-address
The provided vpn addr could not be parsed: not-an-address
exit status 1
$ print-cert -json not-an-address
The provided vpn addr could not be parsed: not-an-address
exit status 1
$ print-cert -pretty not-an-address
The provided vpn addr could not be parsed: not-an-address
exit status 1
$ print-tunnel
No vpn address was provided
exit status 1
$ print-tunnel -json
flag provided but not defined: -json
Usage:
-pretty
pretty prints json
exit status 1
$ print-tunnel -pretty
No vpn address was provided
exit status 1
$ print-tunnel 10.222.0.9
Could not find tunnel for vpn addr: 10.222.0.9
exit status 1
$ print-tunnel -json 10.222.0.9
flag provided but not defined: -json
Usage:
-pretty
pretty prints json
exit status 1
$ print-tunnel -pretty 10.222.0.9
Could not find tunnel for vpn addr: 10.222.0.9
exit status 1
$ print-tunnel 10.222.0.250
Could not find tunnel for vpn addr: 10.222.0.250
exit status 1
$ print-tunnel -json 10.222.0.250
flag provided but not defined: -json
Usage:
-pretty
pretty prints json
exit status 1
$ print-tunnel -pretty 10.222.0.250
Could not find tunnel for vpn addr: 10.222.0.250
exit status 1
$ print-relays
{"Relays":null}
$ print-relays -json
flag provided but not defined: -json
Usage:
-pretty
pretty prints json
exit status 1
$ print-relays -pretty
{
"Relays": null
}
$ query-lighthouse
No vpn address was provided
exit status 1
$ query-lighthouse -json
The provided vpn address could not be parsed: -json
exit status 1
$ query-lighthouse -pretty
The provided vpn address could not be parsed: -pretty
exit status 1
$ query-lighthouse 10.222.0.9
{}
$ query-lighthouse -json 10.222.0.9
The provided vpn address could not be parsed: -json
exit status 1
$ query-lighthouse -pretty 10.222.0.9
The provided vpn address could not be parsed: -pretty
exit status 1
$ query-lighthouse not-an-address
The provided vpn address could not be parsed: not-an-address
exit status 1
$ query-lighthouse -json not-an-address
The provided vpn address could not be parsed: -json
exit status 1
$ query-lighthouse -pretty not-an-address
The provided vpn address could not be parsed: -pretty
exit status 1
$ log-level
Log level is not reconfigurable on this logger
exit status 1
$ log-level -json
Log level is not reconfigurable on this logger
exit status 1
$ log-level -pretty
Log level is not reconfigurable on this logger
exit status 1
$ log-level debug
Log level is not reconfigurable on this logger
exit status 1
$ log-level -json debug
Log level is not reconfigurable on this logger
exit status 1
$ log-level -pretty debug
Log level is not reconfigurable on this logger
exit status 1
$ log-level bogus
Log level is not reconfigurable on this logger
exit status 1
$ log-level -json bogus
Log level is not reconfigurable on this logger
exit status 1
$ log-level -pretty bogus
Log level is not reconfigurable on this logger
exit status 1
$ log-level info
Log level is not reconfigurable on this logger
exit status 1
$ log-level -json info
Log level is not reconfigurable on this logger
exit status 1
$ log-level -pretty info
Log level is not reconfigurable on this logger
exit status 1
$ log-format
Log format is not reconfigurable on this logger
exit status 1
$ log-format -json
Log format is not reconfigurable on this logger
exit status 1
$ log-format -pretty
Log format is not reconfigurable on this logger
exit status 1
$ log-format json
Log format is not reconfigurable on this logger
exit status 1
$ log-format -json json
Log format is not reconfigurable on this logger
exit status 1
$ log-format -pretty json
Log format is not reconfigurable on this logger
exit status 1
$ log-format text
Log format is not reconfigurable on this logger
exit status 1
$ log-format -json text
Log format is not reconfigurable on this logger
exit status 1
$ log-format -pretty text
Log format is not reconfigurable on this logger
exit status 1
$ change-remote
No vpn address was provided
exit status 1
$ change-remote -json
flag provided but not defined: -json
Usage:
-address string
The new remote address, ip:port
exit status 1
$ change-remote -pretty
flag provided but not defined: -pretty
Usage:
-address string
The new remote address, ip:port
exit status 1
$ change-remote 10.222.0.9
No address was provided
exit status 1
$ change-remote -json 10.222.0.9
flag provided but not defined: -json
Usage:
-address string
The new remote address, ip:port
exit status 1
$ change-remote -pretty 10.222.0.9
flag provided but not defined: -pretty
Usage:
-address string
The new remote address, ip:port
exit status 1
$ change-remote -address 10.94.0.10:4242 10.222.0.9
Could not find tunnel for vpn address: 10.222.0.9
exit status 1
$ change-remote -json -address 10.94.0.10:4242 10.222.0.9
flag provided but not defined: -json
Usage:
-address string
The new remote address, ip:port
exit status 1
$ change-remote -pretty -address 10.94.0.10:4242 10.222.0.9
flag provided but not defined: -pretty
Usage:
-address string
The new remote address, ip:port
exit status 1
$ change-remote -address 10.94.0.10:4242 10.222.0.250
Could not find tunnel for vpn address: 10.222.0.250
exit status 1
$ change-remote -json -address 10.94.0.10:4242 10.222.0.250
flag provided but not defined: -json
Usage:
-address string
The new remote address, ip:port
exit status 1
$ change-remote -pretty -address 10.94.0.10:4242 10.222.0.250
flag provided but not defined: -pretty
Usage:
-address string
The new remote address, ip:port
exit status 1
$ create-tunnel
No vpn address was provided
exit status 1
$ create-tunnel -json
flag provided but not defined: -json
Usage:
-address string
Optionally provide a real remote address, ip:port
exit status 1
$ create-tunnel -pretty
flag provided but not defined: -pretty
Usage:
-address string
Optionally provide a real remote address, ip:port
exit status 1
$ create-tunnel 10.222.0.9
Tunnel already handshaking
exit status 1
$ create-tunnel -json 10.222.0.9
flag provided but not defined: -json
Usage:
-address string
Optionally provide a real remote address, ip:port
exit status 1
$ create-tunnel -pretty 10.222.0.9
flag provided but not defined: -pretty
Usage:
-address string
Optionally provide a real remote address, ip:port
exit status 1
$ create-tunnel -address 10.94.0.10:4242 10.222.0.10
Created
$ create-tunnel -json -address 10.94.0.10:4242 10.222.0.10
flag provided but not defined: -json
Usage:
-address string
Optionally provide a real remote address, ip:port
exit status 1
$ create-tunnel -pretty -address 10.94.0.10:4242 10.222.0.10
flag provided but not defined: -pretty
Usage:
-address string
Optionally provide a real remote address, ip:port
exit status 1
$ create-tunnel not-an-address
The provided vpn address could not be parsed: not-an-address
exit status 1
$ create-tunnel -json not-an-address
flag provided but not defined: -json
Usage:
-address string
Optionally provide a real remote address, ip:port
exit status 1
$ create-tunnel -pretty not-an-address
flag provided but not defined: -pretty
Usage:
-address string
Optionally provide a real remote address, ip:port
exit status 1
$ close-tunnel
No vpn address was provided
exit status 1
$ close-tunnel -json
flag provided but not defined: -json
Usage:
-local-only
Disables notifying the remote that the tunnel is shutting down
exit status 1
$ close-tunnel -pretty
flag provided but not defined: -pretty
Usage:
-local-only
Disables notifying the remote that the tunnel is shutting down
exit status 1
$ close-tunnel 10.222.0.250
Could not find tunnel for vpn address: 10.222.0.250
exit status 1
$ close-tunnel -json 10.222.0.250
flag provided but not defined: -json
Usage:
-local-only
Disables notifying the remote that the tunnel is shutting down
exit status 1
$ close-tunnel -pretty 10.222.0.250
flag provided but not defined: -pretty
Usage:
-local-only
Disables notifying the remote that the tunnel is shutting down
exit status 1
$ close-tunnel not-an-address
The provided vpn address could not be parsed: not-an-address
exit status 1
$ close-tunnel -json not-an-address
flag provided but not defined: -json
Usage:
-local-only
Disables notifying the remote that the tunnel is shutting down
exit status 1
$ close-tunnel -pretty not-an-address
flag provided but not defined: -pretty
Usage:
-local-only
Disables notifying the remote that the tunnel is shutting down
exit status 1
$ help
Available commands:
change-remote - Changes the remote address used in the tunnel for the provided vpn addr
close-tunnel - Closes a tunnel for the provided vpn addr
create-tunnel - Creates a tunnel for the provided vpn address
device-info - Prints information about the network device.
help - prints available commands or help <command> for specific usage info
list-hostmap - List all known previously connected hosts
list-lighthouse-addrmap - List all lighthouse map entries
list-pending-hostmap - List all handshaking hosts
log-format - Gets or sets the current log format
log-level - Gets or sets the current log level
logout - Ends the current session
print-cert - Prints the current certificate being used or the certificate for the provided vpn addr
print-relays - Prints json details about all relay info
print-tunnel - Prints json details about a tunnel for the provided vpn addr
query-lighthouse - Query the lighthouses for the provided vpn address
reload - Reloads configuration from disk, same as sending HUP to the process
version - Prints the currently running version of nebula
$ help -json
Command not available -json
exit status 1
$ help -pretty
Command not available -pretty
exit status 1
$ help print-cert
print-cert - Prints the current certificate being used or the certificate for the provided vpn addr
-json
outputs as json
-pretty
pretty prints json, assumes -json
-raw
raw prints the PEM encoded certificate, not compatible with -json or -pretty
$ help -json print-cert
Command not available -json
exit status 1
$ help -pretty print-cert
Command not available -pretty
exit status 1
$ help logout
logout - Ends the current session
$ help -json logout
Command not available -json
exit status 1
$ help -pretty logout
Command not available -pretty
exit status 1
$ logout -h
logout - Ends the current session
$ logout -json -h
logout - Ends the current session
$ logout -pretty -h
logout - Ends the current session
$ not-a-command 10.222.0.9
did not understand: not-a-command
Available commands:
change-remote - Changes the remote address used in the tunnel for the provided vpn addr
close-tunnel - Closes a tunnel for the provided vpn addr
create-tunnel - Creates a tunnel for the provided vpn address
device-info - Prints information about the network device.
help - prints available commands or help <command> for specific usage info
list-hostmap - List all known previously connected hosts
list-lighthouse-addrmap - List all lighthouse map entries
list-pending-hostmap - List all handshaking hosts
log-format - Gets or sets the current log format
log-level - Gets or sets the current log level
logout - Ends the current session
print-cert - Prints the current certificate being used or the certificate for the provided vpn addr
print-relays - Prints json details about all relay info
print-tunnel - Prints json details about a tunnel for the provided vpn addr
query-lighthouse - Query the lighthouses for the provided vpn address
reload - Reloads configuration from disk, same as sending HUP to the process
version - Prints the currently running version of nebula
exit status 1
$ not-a-command -json 10.222.0.9
did not understand: not-a-command
Available commands:
change-remote - Changes the remote address used in the tunnel for the provided vpn addr
close-tunnel - Closes a tunnel for the provided vpn addr
create-tunnel - Creates a tunnel for the provided vpn address
device-info - Prints information about the network device.
help - prints available commands or help <command> for specific usage info
list-hostmap - List all known previously connected hosts
list-lighthouse-addrmap - List all lighthouse map entries
list-pending-hostmap - List all handshaking hosts
log-format - Gets or sets the current log format
log-level - Gets or sets the current log level
logout - Ends the current session
print-cert - Prints the current certificate being used or the certificate for the provided vpn addr
print-relays - Prints json details about all relay info
print-tunnel - Prints json details about a tunnel for the provided vpn addr
query-lighthouse - Query the lighthouses for the provided vpn address
reload - Reloads configuration from disk, same as sending HUP to the process
version - Prints the currently running version of nebula
exit status 1
$ not-a-command -pretty 10.222.0.9
did not understand: not-a-command
Available commands:
change-remote - Changes the remote address used in the tunnel for the provided vpn addr
close-tunnel - Closes a tunnel for the provided vpn addr
create-tunnel - Creates a tunnel for the provided vpn address
device-info - Prints information about the network device.
help - prints available commands or help <command> for specific usage info
list-hostmap - List all known previously connected hosts
list-lighthouse-addrmap - List all lighthouse map entries
list-pending-hostmap - List all handshaking hosts
log-format - Gets or sets the current log format
log-level - Gets or sets the current log level
logout - Ends the current session
print-cert - Prints the current certificate being used or the certificate for the provided vpn addr
print-relays - Prints json details about all relay info
print-tunnel - Prints json details about a tunnel for the provided vpn addr
query-lighthouse - Query the lighthouses for the provided vpn address
reload - Reloads configuration from disk, same as sending HUP to the process
version - Prints the currently running version of nebula
exit status 1
$ reload
Reloading config
Config reload failed, the new config did not load: no config files found at
exit status 1
$ reload -json
Reloading config
Config reload failed, the new config did not load: no config files found at
exit status 1
$ reload -pretty
Reloading config
Config reload failed, the new config did not load: no config files found at
exit status 1
+2 -2
View File
@@ -129,7 +129,7 @@ func TestCertUpgrade(t *testing.T) {
}
r.Logf("reload new v2-only config")
err = myC.ReloadConfigString(string(cb)).Err
err = myC.ReloadConfigString(string(cb))
assert.NoError(t, err)
r.Log("yay, spin until their sees it")
waitStart := time.Now()
@@ -222,7 +222,7 @@ func TestCertDowngrade(t *testing.T) {
}
r.Logf("reload new v1-only config")
err = myC.ReloadConfigString(string(cb)).Err
err = myC.ReloadConfigString(string(cb))
assert.NoError(t, err)
r.Log("yay, spin until their sees it")
waitStart := time.Now()
+19 -26
View File
@@ -8,7 +8,6 @@ pki:
cert: /etc/nebula/host.crt
key: /etc/nebula/host.key
# blocklist is a list of certificate fingerprints that we will refuse to talk to
# Entries are the hex fingerprints shown by `nebula-cert print`, an invalid entry fails startup and reload.
#blocklist:
# - c99d4e650533b92061b09918e838a5a0a6aaee21eed1d12fd937682865936c72
# disconnect_invalid is a toggle to force a client to be disconnected if the certificate is expired or invalid.
@@ -44,7 +43,7 @@ static_host_map:
lighthouse:
# am_lighthouse is used to enable lighthouse functionality for a node. This should ONLY be true on nodes
# you have configured to be lighthouses in your network. Not reloadable.
# you have configured to be lighthouses in your network
am_lighthouse: false
# serve_dns optionally starts a dns listener that responds to various queries and can even be
# delegated to for resolution
@@ -127,9 +126,8 @@ lighthouse:
# Port Nebula will be listening on. The default here is 4242. For a lighthouse node, the port should be defined,
# however using port 0 will dynamically assign a port and is recommended for roaming nodes.
listen:
# To listen on only ipv4, use "0.0.0.0". Not reloadable.
# To listen on only ipv4, use "0.0.0.0"
host: "::"
# Not reloadable.
port: 4242
# Sets the max number of packets to pull from the kernel for each syscall (under systems that support recvmmsg)
# default is 64, does not support reload
@@ -137,13 +135,12 @@ listen:
# superpacket, so the receive scratch is batch * 64KiB per listening socket (~4MiB per routine at the
# default of 64). Lower this to trade peak per-syscall throughput for memory on constrained hosts.
#batch: 64
# Linux only. Reloadable, but removing a value leaves the socket at the old size until Nebula restarts.
# Configure socket buffers for the udp side (outside), leave unset to use the system defaults. Values will be doubled by the kernel
# Default is net.core.rmem_default and net.core.wmem_default (/proc/sys/net/core/rmem_default and /proc/sys/net/core/rmem_default)
# Maximum is limited by memory in the system, SO_RCVBUFFORCE and SO_SNDBUFFORCE is used to avoid having to raise the system wide
# max, net.core.rmem_max and net.core.wmem_max
read_buffer: 3412512
write_buffer: 3412512
#read_buffer: 10485760
#write_buffer: 10485760
# On Windows only
# When true, Nebula installs a WFP (Windows Filtering Platform) PERMIT filter scoped to UDP at the listener port.
@@ -182,7 +179,7 @@ listen:
# Currently, this defaults to 1 which means we have 1 tun queue reader and 1
# UDP queue reader. Setting this above one will set IFF_MULTI_QUEUE on the tun
# device and SO_REUSEPORT on the UDP socket to allow multiple queues.
# This option is only supported on Linux. Not reloadable.
# This option is only supported on Linux.
#routines: 1
punchy:
@@ -206,7 +203,6 @@ punchy:
# Cipher allows you to choose between the available ciphers for your network. Options are chachapoly or aes
# IMPORTANT: this value must be identical on ALL NODES/LIGHTHOUSES. We do not/will not support use of different ciphers simultaneously!
# Not reloadable.
#cipher: aes
# Preferred ranges is used to define a hint about the local network ranges, which speeds up discovering the fastest
@@ -233,6 +229,12 @@ punchy:
# Trusted SSH CA public keys. These are the public keys of the CAs that are allowed to sign SSH keys for access.
#trusted_cas:
#- "ssh public key string"
# sandbox_dir restricts file paths for profiling commands (start-cpu-profile, save-heap-profile,
# save-mutex-profile) to the specified directory. Relative paths will be resolved within this directory,
# and absolute paths outside of it will be rejected. Default is $TMP/nebula-debug.
# The directory is NOT automatically created.
# Overriding this to "" is the same as "/" and will allow overwriting any path on the host.
#sandbox_dir: /var/tmp/nebula-debug
# EXPERIMENTAL: relay support for networks that can't establish direct connections.
relay:
@@ -251,25 +253,18 @@ relay:
# Configure the private interface. Note: addr is baked into the nebula certificate
tun:
# When tun is disabled, a lighthouse can be started without a local tun interface (and therefore without root)
# Not reloadable.
disabled: false
# Name of the device. If not set, a default will be chosen by the OS.
# For macOS: if set, must be in the form `utun[0-9]+`.
# For OpenBSD and NetBSD: if set, must be in the form `tun[0-9]+`, otherwise the first free one is used.
# Not reloadable.
# For NetBSD: Required to be set, must be in the form `tun[0-9]+`
dev: nebula1
# Toggles forwarding of local broadcast packets, the address of which depends on the ip/mask encoded in pki.cert
# Not reloadable.
drop_local_broadcast: false
# Toggles forwarding of multicast packets. Not reloadable.
# Toggles forwarding of multicast packets
drop_multicast: false
# Sets the transmit queue length, if you notice lots of transmit drops on the tun it may help to raise this number. Default is 5000
# Not reloadable.
tx_queue: 5000
# Sets the transmit queue length, if you notice lots of transmit drops on the tun it may help to raise this number. Default is 500
tx_queue: 500
# Default MTU for every packet, safe setting is (and the default) 1300 for internet based traffic
# Anything above 8937, here or on a route below, is capped to 8937 with a warning
# Reloadable on Linux only. Where the tun is handed to nebula by a host app (iOS, Android, macOS network extensions)
# the host app owns the MTU.
mtu: 1300
# the use_offloads setting controls if Nebula will attempt to enable GSO and GRO for the tun device. Linux only, not reloadable.
@@ -362,7 +357,7 @@ tun:
#use_system_route_table: false
# Buffer size for reading routes updates. 0 means default system buffer size. (/proc/sys/net/core/rmem_default).
# If using massive routes updates, for example BGP, you may need to increase this value to avoid packet loss.
# SO_RCVBUFFORCE is used to avoid having to raise the system wide max. Not reloadable.
# SO_RCVBUFFORCE is used to avoid having to raise the system wide max
#use_system_route_table_buffer_size: 0
# Configure logging level
@@ -412,16 +407,14 @@ logging:
# Handshakes are sent to all known addresses at each interval with a linear backoff,
# Wait try_interval after the 1st attempt, 2 * try_interval after the 2nd, etc, until the handshake is older than timeout
# A 100ms interval with the default 10 retries will give a handshake 5.5 seconds to resolve before timing out
# Not reloadable.
#try_interval: 100ms
#retries: 20
# query_buffer is the size of the buffer channel for querying lighthouses, drops are recorded in the lighthouse.query.dropped metric.
# Not reloadable.
#query_buffer: 1024
# query_buffer is the size of the buffer channel for querying lighthouses
#query_buffer: 64
# trigger_buffer is the size of the buffer channel for quickly sending handshakes
# after receiving the response for lighthouse queries. Not reloadable.
# after receiving the response for lighthouse queries
#trigger_buffer: 64
# Tunnel manager settings
+9 -9
View File
@@ -1,12 +1,13 @@
module github.com/slackhq/nebula
go 1.27.2
go 1.26.0
require (
dario.cat/mergo v1.0.2
filippo.io/bigmod v0.1.0
github.com/DefinedNet/netlink v1.3.2-dn.1
github.com/anmitsu/go-shlex v0.0.0-20200514113438-38f4b401e2be
github.com/armon/go-radix v1.0.0
github.com/flynn/noise v1.1.0
github.com/gaissmai/bart v0.29.0
github.com/gogo/protobuf v1.3.2
@@ -22,17 +23,17 @@ require (
github.com/stretchr/testify v1.12.1
go.uber.org/goleak v1.3.0
go.yaml.in/yaml/v3 v3.0.5
golang.org/x/crypto v0.58.0
golang.org/x/net v0.60.0
golang.org/x/sync v0.24.0
golang.org/x/sys v0.49.0
golang.org/x/term v0.47.0
golang.org/x/crypto v0.57.0
golang.org/x/net v0.59.0
golang.org/x/sync v0.23.0
golang.org/x/sys v0.48.0
golang.org/x/term v0.46.0
golang.zx2c4.com/wintun v0.0.0-20230126152724-0fa3db229ce2
golang.zx2c4.com/wireguard v0.0.0-20230325221338-052af4a8072b
golang.zx2c4.com/wireguard/windows v1.0.1
google.golang.org/protobuf v1.36.12
gopkg.in/yaml.v3 v3.0.1
gvisor.dev/gvisor v0.0.0-20261014193016-04d31b385980
gvisor.dev/gvisor v0.0.0-20240423190808-9d7a357edefe
)
require (
@@ -44,6 +45,5 @@ require (
github.com/prometheus/common v0.70.1 // indirect
github.com/prometheus/procfs v0.21.1 // indirect
github.com/vishvananda/netns v0.0.5 // indirect
golang.org/x/exp v0.0.0-20250711185948-6ae5c78190dc // indirect
golang.org/x/time v0.15.0 // indirect
golang.org/x/time v0.5.0 // indirect
)
+16 -16
View File
@@ -12,6 +12,8 @@ github.com/alecthomas/units v0.0.0-20190717042225-c3de453c63f4/go.mod h1:ybxpYRF
github.com/alecthomas/units v0.0.0-20190924025748-f65c72e2690d/go.mod h1:rBZYJk541a8SKzHPHnH3zbiI+7dagKZ0cgpgrD7Fyho=
github.com/anmitsu/go-shlex v0.0.0-20200514113438-38f4b401e2be h1:9AeTilPcZAjCFIImctFaOjnTIavg87rW78vTPkQqLI8=
github.com/anmitsu/go-shlex v0.0.0-20200514113438-38f4b401e2be/go.mod h1:ySMOLuWl6zY27l47sB3qLNK6tF2fkHG55UZxx8oIVo4=
github.com/armon/go-radix v1.0.0 h1:F4z6KzEeeQIMeLFa97iZU6vupzoecKdU5TX24SNppXI=
github.com/armon/go-radix v1.0.0/go.mod h1:ufUuZ+zHj4x4TnLV4JWEpy2hxWSpsRywHrMgIH9cCH8=
github.com/beorn7/perks v0.0.0-20180321164747-3a771d992973/go.mod h1:Dwedo/Wpr24TaqPxmxbtue+5NUziq4I4S80YR8gNf3Q=
github.com/beorn7/perks v1.0.0/go.mod h1:KWe93zE9D1o94FZ5RNwFwVgaQK1VOXiVxmqh+CedLV8=
github.com/beorn7/perks v1.0.1 h1:VlbKKnNfV8bJzeqoa4cOKqO6bYr3WgKZxO8Z16+hsOM=
@@ -153,10 +155,8 @@ golang.org/x/crypto v0.0.0-20190308221718-c2843e01d9a2/go.mod h1:djNgcEr1/C05ACk
golang.org/x/crypto v0.0.0-20191011191535-87dc89f01550/go.mod h1:yigFU9vqHzYiE8UmvKecakEJjdnWj3jj499lnFckfCI=
golang.org/x/crypto v0.0.0-20200622213623-75b288015ac9/go.mod h1:LzIPMQfyMNhhGPhUkYOs5KpL4U8rLKemX1yGLhDgUto=
golang.org/x/crypto v0.0.0-20210322153248-0c34fe9e7dc2/go.mod h1:T9bdIzuCu7OtxOm1hfPfRQxPLYneinmdGuTeoZ9dtd4=
golang.org/x/crypto v0.58.0 h1:COkYLr4k7nDI4r6QtMML2AfzeIswWHAJthLS6K/M/54=
golang.org/x/crypto v0.58.0/go.mod h1:Xh+kl5A+M0gMiWDytH2Hhr5Z7WbNCpv/eB/EFgfSk+w=
golang.org/x/exp v0.0.0-20250711185948-6ae5c78190dc h1:TS73t7x3KarrNd5qAipmspBDS1rkMcgVG/fS1aRb4Rc=
golang.org/x/exp v0.0.0-20250711185948-6ae5c78190dc/go.mod h1:A+z0yzpGtvnG90cToK5n2tu8UJVP2XUATh+r+sfOOOc=
golang.org/x/crypto v0.57.0 h1:3ZVCjf8Ggz7zneR/EHRVx68Ctf+2pmIMP2UFhh9cC6M=
golang.org/x/crypto v0.57.0/go.mod h1:Fdz0i5U6CoizGwLda9DttjSk6qlZo25zYNtR+ycvuZA=
golang.org/x/lint v0.0.0-20200302205851-738671d3881b/go.mod h1:3xt1FjdF8hUf6vQPIChWIBhFzV8gjjsPE/fR3IyQdNY=
golang.org/x/mod v0.1.1-0.20191105210325-c90efee705ee/go.mod h1:QqPTAvyqsEbceGzBzNggFXnrqF1CaUcvgkdR5Ot7KZg=
golang.org/x/mod v0.2.0/go.mod h1:s0Qsj1ACt9ePp/hMypM3fl4fZqREWJwdYDEqhRiZZUA=
@@ -171,8 +171,8 @@ golang.org/x/net v0.0.0-20200226121028-0de0cce0169b/go.mod h1:z5CRVTTTmAJ677TzLL
golang.org/x/net v0.0.0-20200625001655-4c5254603344/go.mod h1:/O7V0waA8r7cgGh81Ro3o1hOxt32SMVPicZroKQ2sZA=
golang.org/x/net v0.0.0-20201021035429-f5854403a974/go.mod h1:sp8m0HH+o8qH0wwXwYZr8TS3Oi6o0r6Gce1SSxlDquU=
golang.org/x/net v0.0.0-20210226172049-e18ecbb05110/go.mod h1:m0MpNAwzfU5UDzcl9v0D8zg8gWTRqZa9RBIspLL5mdg=
golang.org/x/net v0.60.0 h1:79p50tfZlm0J9YfoDsSi639qSXNGVwEzOPLCxM2FsYU=
golang.org/x/net v0.60.0/go.mod h1:2DA/G1UfVbCpQPeWTmMPGY7Cs2PkBkwu743bVX5PIVg=
golang.org/x/net v0.59.0 h1:5zfYln+w5XCxwrnMMJPufRgNoXEaGxl0wo5GqPXyues=
golang.org/x/net v0.59.0/go.mod h1:2DA/G1UfVbCpQPeWTmMPGY7Cs2PkBkwu743bVX5PIVg=
golang.org/x/oauth2 v0.0.0-20190226205417-e64efc72b421/go.mod h1:gOpvHmFTYa4IltrdGE7lF6nIHvwfUNPOp7c8zoXwtLw=
golang.org/x/sync v0.0.0-20181108010431-42b317875d0f/go.mod h1:RxMgew5VJxzue5/jJTE5uejpjVlOe/izrB70Jof72aM=
golang.org/x/sync v0.0.0-20181221193216-37e7f081c4d4/go.mod h1:RxMgew5VJxzue5/jJTE5uejpjVlOe/izrB70Jof72aM=
@@ -180,8 +180,8 @@ golang.org/x/sync v0.0.0-20190423024810-112230192c58/go.mod h1:RxMgew5VJxzue5/jJ
golang.org/x/sync v0.0.0-20190911185100-cd5d95a43a6e/go.mod h1:RxMgew5VJxzue5/jJTE5uejpjVlOe/izrB70Jof72aM=
golang.org/x/sync v0.0.0-20201020160332-67f06af15bc9/go.mod h1:RxMgew5VJxzue5/jJTE5uejpjVlOe/izrB70Jof72aM=
golang.org/x/sync v0.0.0-20201207232520-09787c993a3a/go.mod h1:RxMgew5VJxzue5/jJTE5uejpjVlOe/izrB70Jof72aM=
golang.org/x/sync v0.24.0 h1:iqiDrGoDgyuvAKrhLQthUEzU/R378N78gXbBjxed7oA=
golang.org/x/sync v0.24.0/go.mod h1:sUUOizhqBxiL6pEWpqNLUiaJn1ShEbZ6BBqskPbjZm0=
golang.org/x/sync v0.23.0 h1:KameEIfc1IkluZyXWLn39Wd4tURc6GbCiISGiZm2bQk=
golang.org/x/sync v0.23.0/go.mod h1:sUUOizhqBxiL6pEWpqNLUiaJn1ShEbZ6BBqskPbjZm0=
golang.org/x/sys v0.0.0-20180905080454-ebe1bf3edb33/go.mod h1:STP8DvDyc/dI5b8T5hshtkjS+E42TnysNCUPdjciGhY=
golang.org/x/sys v0.0.0-20181116152217-5ac8a444bdc5/go.mod h1:STP8DvDyc/dI5b8T5hshtkjS+E42TnysNCUPdjciGhY=
golang.org/x/sys v0.0.0-20190215142949-d0b11bdaac8a/go.mod h1:STP8DvDyc/dI5b8T5hshtkjS+E42TnysNCUPdjciGhY=
@@ -195,16 +195,16 @@ golang.org/x/sys v0.0.0-20200930185726-fdedc70b468f/go.mod h1:h1NjWce9XRLGQEsW7w
golang.org/x/sys v0.0.0-20201119102817-f84b799fce68/go.mod h1:h1NjWce9XRLGQEsW7wpKNCjG9DtNlClVuFLEZdDNbEs=
golang.org/x/sys v0.0.0-20210124154548-22da62e12c0c/go.mod h1:h1NjWce9XRLGQEsW7wpKNCjG9DtNlClVuFLEZdDNbEs=
golang.org/x/sys v0.0.0-20210603081109-ebe580a85c40/go.mod h1:oPkhp1MJrh7nUepCBck5+mAzfO9JrbApNNgaTdGDITg=
golang.org/x/sys v0.49.0 h1:XbzkgYJHdqh/8m2Uu0W/dQv8nktxx4BFHp1M0gROTXA=
golang.org/x/sys v0.49.0/go.mod h1:hNLxWAXmnKAxqDtdwIYC4bM9oQPEecfsnNMuSxOs3og=
golang.org/x/sys v0.48.0 h1:bbX/i/6MgT9BVLM9RT1thmxL04yeTAhbEz4SyadbXoo=
golang.org/x/sys v0.48.0/go.mod h1:hNLxWAXmnKAxqDtdwIYC4bM9oQPEecfsnNMuSxOs3og=
golang.org/x/term v0.0.0-20201126162022-7de9c90e9dd1/go.mod h1:bj7SfCRtBDWHUb9snDiAeCFNEtKQo2Wmx5Cou7ajbmo=
golang.org/x/term v0.47.0 h1:cpyOwQkr2Nzxe2p6KnrTG7Ei2wtzjsuSjhpXXepZ/BM=
golang.org/x/term v0.47.0/go.mod h1:efAfAuG6RKABvg1ArGebRkvX6LXul14SM67o2e4mUCY=
golang.org/x/term v0.46.0 h1:3+OXuTbaKDgwk8jTi3aSLHRlmWqHEUDUtxnbFigO4YE=
golang.org/x/term v0.46.0/go.mod h1:+K02xbkittuwc0Am4abfA3Fc+XRGXkvBXNO88NCXPoc=
golang.org/x/text v0.3.0/go.mod h1:NqM8EUOU14njkJ3fqMW+pc6Ldnwhi/IjpwHt7yyuwOQ=
golang.org/x/text v0.3.2/go.mod h1:bEr9sfX3Q8Zfm5fL9x+3itogRgK3+ptLWKqgva+5dAk=
golang.org/x/text v0.3.3/go.mod h1:5Zoc/QRtKVWzQhOtBMvqHzDpF6irO9z98xDceosuGiQ=
golang.org/x/time v0.15.0 h1:bbrp8t3bGUeFOx08pvsMYRTCVSMk89u4tKbNOZbp88U=
golang.org/x/time v0.15.0/go.mod h1:Y4YMaQmXwGQZoFaVFk4YpCt4FLQMYKZe9oeV/f4MSno=
golang.org/x/time v0.5.0 h1:o7cqy6amK/52YcAKIPlM3a+Fpj35zvRj2TP+e1xFSfk=
golang.org/x/time v0.5.0/go.mod h1:3BpzKBy/shNhVucY/MWOyx10tF3SFh9QdLuxbVysPQM=
golang.org/x/tools v0.0.0-20180917221912-90fa682c2a6e/go.mod h1:n7NCudcB/nEzxVGmLbDWY5pfWTLqBcC2KZ6jyYvM4mQ=
golang.org/x/tools v0.0.0-20191119224855-298f0cb1881e/go.mod h1:b+2E5dAYhXwXZwtnZ6UAqBI28+e2cm9otk0dWdXHAEo=
golang.org/x/tools v0.0.0-20200130002326-2f3ba24bd6e7/go.mod h1:TB2adYChydJhpapKDTa4BR/hXlZSLoq2Wpct/0txZ28=
@@ -243,5 +243,5 @@ gopkg.in/yaml.v2 v2.3.0/go.mod h1:hI93XBmqTisBFMUTm0b8Fm+jr3Dg1NNxqwp+5A1VGuI=
gopkg.in/yaml.v3 v3.0.0-20200313102051-9f266ea9e77c/go.mod h1:K4uyk7z7BCEPqu6E+C64Yfv1cQ7kz7rIZviUmN+EgEM=
gopkg.in/yaml.v3 v3.0.1 h1:fxVm/GzAzEWqLHuvctI91KS9hhNmmWOoWu0XTYJS7CA=
gopkg.in/yaml.v3 v3.0.1/go.mod h1:K4uyk7z7BCEPqu6E+C64Yfv1cQ7kz7rIZviUmN+EgEM=
gvisor.dev/gvisor v0.0.0-20261014193016-04d31b385980 h1:ribyrTYQ/QYeUIs8x8bVLYwGyepa7RnHLqJzegT5YYk=
gvisor.dev/gvisor v0.0.0-20261014193016-04d31b385980/go.mod h1:pK/dapF5Bf3KGW7/kd5CI5IC4lYh9FMFY1qETAIGLXk=
gvisor.dev/gvisor v0.0.0-20240423190808-9d7a357edefe h1:fre4i6mv4iBuz5lCMOzHD1rH1ljqHWSICFmZRbbgp3g=
gvisor.dev/gvisor v0.0.0-20240423190808-9d7a357edefe/go.mod h1:sxc3Uvk/vHcd3tj7/DHVBoR5wvWT/MmRq2pj7HRJnwU=
+5 -18
View File
@@ -31,7 +31,6 @@ package nebula
import (
"bufio"
"context"
"fmt"
"net"
"strconv"
@@ -52,29 +51,17 @@ type graphiteConfigExport struct {
Percentiles []float64 // Percentiles to export from timers and histograms
}
// graphiteTimeout bounds one submission, the connect and the write together. An export is a few KB, a host that can't
// take that in this long isn't going to.
const graphiteTimeout = 30 * time.Second
// graphiteOnce performs a single submission to Graphite, returning a non-nil
// error if it could not connect or write all of it within timeout. It gives up
// as soon as ctx is done.
func graphiteOnce(ctx context.Context, c graphiteConfigExport, timeout time.Duration) error {
// error on failed connections.
func graphiteOnce(c graphiteConfigExport) error {
now := time.Now().Unix()
du := float64(c.DurationUnit)
flushSeconds := float64(c.FlushInterval) / float64(time.Second)
deadline := time.Now().Add(timeout)
d := net.Dialer{Deadline: deadline}
conn, err := d.DialContext(ctx, "tcp", c.Addr.String())
conn, err := net.DialTCP("tcp", nil, c.Addr)
if err != nil {
return err
}
defer conn.Close()
if err := conn.SetDeadline(deadline); err != nil {
return err
}
stop := context.AfterFunc(ctx, func() { _ = conn.Close() })
defer stop()
w := bufio.NewWriter(conn)
c.Registry.Each(func(name string, i any) {
switch metric := i.(type) {
@@ -124,7 +111,7 @@ func graphiteOnce(ctx context.Context, c graphiteConfigExport, timeout time.Dura
fmt.Fprintf(w, "%s.%s.fifteen-minute %.2f %d\n", c.Prefix, name, t.Rate15(), now)
fmt.Fprintf(w, "%s.%s.mean-rate %.2f %d\n", c.Prefix, name, t.RateMean(), now)
}
w.Flush()
})
// A failed write sticks, so this reports the first one
return w.Flush()
return nil
}
-315
View File
@@ -1,315 +0,0 @@
package nebula
import (
"bytes"
"context"
"errors"
"fmt"
"io"
"net"
"strings"
"sync"
"testing"
"time"
"github.com/rcrowley/go-metrics"
"github.com/slackhq/nebula/test"
"github.com/stretchr/testify/assert"
"github.com/stretchr/testify/require"
)
// graphiteHost accepts connections and hands each one to the test
type graphiteHost struct {
ln net.Listener
conns chan net.Conn
mu sync.Mutex
closed bool
open []net.Conn
}
// newGraphiteHost accepts connections for the test. A non-zero window shrinks each connection's receive buffer, so a
// sender that is not read from blocks after a little whatever the host's TCP tuning. Only for tests that need a stall,
// a small window makes reading very slow on Linux.
func newGraphiteHost(t *testing.T, window int) *graphiteHost {
t.Helper()
ln, err := net.Listen("tcp", "127.0.0.1:0")
require.NoError(t, err)
h := &graphiteHost{ln: ln, conns: make(chan net.Conn, 8)}
done := make(chan struct{})
t.Cleanup(func() {
_ = ln.Close()
h.mu.Lock()
h.closed = true
for _, c := range h.open {
_ = c.Close()
}
h.mu.Unlock()
close(done)
})
go func() {
for {
c, err := ln.Accept()
if err != nil {
return
}
h.mu.Lock()
if h.closed {
h.mu.Unlock()
_ = c.Close()
return
}
h.open = append(h.open, c)
h.mu.Unlock()
if tc, ok := c.(*net.TCPConn); ok && window > 0 {
_ = tc.SetReadBuffer(window)
}
select {
case h.conns <- c:
case <-done:
return
}
}
}()
return h
}
func (h *graphiteHost) addr(t *testing.T) *net.TCPAddr {
a, err := net.ResolveTCPAddr("tcp", h.ln.Addr().String())
require.NoError(t, err)
return a
}
// readExport reads what one send wrote, bounded so a send that never finishes fails the test rather than hanging it
func readExport(t *testing.T, c net.Conn) []byte {
t.Helper()
require.NoError(t, c.SetReadDeadline(time.Now().Add(10*time.Second)))
b, err := io.ReadAll(c)
require.NoError(t, err)
return b
}
func (h *graphiteHost) next(t *testing.T, wait time.Duration) net.Conn {
t.Helper()
select {
case c := <-h.conns:
return c
case <-time.After(wait):
t.Fatal("no connection")
return nil
}
}
// lockedBuffer is a log destination a test can read while the code under test writes to it from another goroutine
type lockedBuffer struct {
mu sync.Mutex
buf bytes.Buffer
}
func (b *lockedBuffer) Write(p []byte) (int, error) {
b.mu.Lock()
defer b.mu.Unlock()
return b.buf.Write(p)
}
func (b *lockedBuffer) String() string {
b.mu.Lock()
defer b.mu.Unlock()
return b.buf.String()
}
func testGraphiteConfig(addr *net.TCPAddr, r metrics.Registry) graphiteConfigExport {
return graphiteConfigExport{Addr: addr, Registry: r, FlushInterval: time.Second, DurationUnit: time.Nanosecond, Prefix: "nebula"}
}
// Enough metrics that one export overflows the socket buffers on any platform, so a send to a host that stops
// reading blocks
func bigGraphiteRegistry(r metrics.Registry, t *testing.T) {
for i := range 200000 {
name := fmt.Sprintf("big.gauge.%d", i)
metrics.GetOrRegisterGauge(name, r).Update(int64(i))
t.Cleanup(func() { r.Unregister(name) })
}
}
func TestGraphiteOnce_sends(t *testing.T) {
r := metrics.NewRegistry()
metrics.GetOrRegisterGauge("g", r).Update(7)
metrics.GetOrRegisterCounter("c", r).Inc(3)
h := newGraphiteHost(t, 0)
require.NoError(t, graphiteOnce(t.Context(), testGraphiteConfig(h.addr(t), r), time.Minute))
b := readExport(t, h.next(t, 5*time.Second))
assert.Contains(t, string(b), "nebula.g.value 7 ")
assert.Contains(t, string(b), "nebula.c.count 3 ")
assert.Contains(t, string(b), "nebula.c.count_ps 3.00 ")
}
// A host that accepts and never reads is given up on, and the failed write is reported
func TestGraphiteOnce_stalledHostTimesOut(t *testing.T) {
r := metrics.NewRegistry()
bigGraphiteRegistry(r, t)
h := newGraphiteHost(t, 4096)
done := make(chan error, 1)
cfg := testGraphiteConfig(h.addr(t), r)
go func() { done <- graphiteOnce(t.Context(), cfg, 300*time.Millisecond) }()
h.next(t, 5*time.Second) // accepted, never read
select {
case err := <-done:
require.Error(t, err)
case <-time.After(10 * time.Second):
t.Fatal("the send did not give up on a host that stopped reading")
}
}
// The timeout covers the whole send, a host that keeps reading but too slowly is still given up on
func TestGraphiteOnce_timeoutCoversTheWholeSend(t *testing.T) {
r := metrics.NewRegistry()
bigGraphiteRegistry(r, t)
h := newGraphiteHost(t, 0)
done := make(chan error, 1)
start := time.Now()
cfg := testGraphiteConfig(h.addr(t), r)
go func() { done <- graphiteOnce(t.Context(), cfg, 500*time.Millisecond) }()
c := h.next(t, 5*time.Second)
stopReading := make(chan struct{})
defer close(stopReading)
// 32KB every 10ms keeps every write well inside the timeout, the whole export takes seconds
go func() {
buf := make([]byte, 32<<10)
for {
select {
case <-stopReading:
return
case <-time.After(10 * time.Millisecond):
}
if _, err := c.Read(buf); err != nil {
return
}
}
}()
select {
case err := <-done:
require.Error(t, err)
assert.Less(t, time.Since(start), 5*time.Second)
case <-time.After(10 * time.Second):
t.Fatal("a host that kept reading slowly held the send past its timeout")
}
}
func TestGraphiteOnce_cancelledCtxDoesNotConnect(t *testing.T) {
h := newGraphiteHost(t, 0)
ctx, cancel := context.WithCancel(t.Context())
cancel()
require.Error(t, graphiteOnce(ctx, testGraphiteConfig(h.addr(t), metrics.NewRegistry()), time.Minute))
select {
case <-h.conns:
t.Fatal("connected on a cancelled ctx")
case <-time.After(200 * time.Millisecond):
}
}
// A stop or reload abandons a stuck send rather than waiting out its timeout
func TestGraphiteOnce_cancelAbandonsSend(t *testing.T) {
r := metrics.NewRegistry()
bigGraphiteRegistry(r, t)
h := newGraphiteHost(t, 4096)
ctx, cancel := context.WithCancel(t.Context())
done := make(chan error, 1)
cfg := testGraphiteConfig(h.addr(t), r)
go func() { done <- graphiteOnce(ctx, cfg, time.Minute) }()
h.next(t, 5*time.Second)
select {
case err := <-done:
t.Fatalf("the send should be stuck on a host that is not reading, it ended with %v", err)
case <-time.After(200 * time.Millisecond):
}
cancel()
select {
case err := <-done:
require.Error(t, err)
case <-time.After(5 * time.Second):
t.Fatal("the send is still stuck after its ctx was cancelled")
}
}
// buildRuntime hands graphite the configured prefix and interval
func TestStatsServer_graphiteExportUsesConfig(t *testing.T) {
const name = "graphite.wiring.test"
metrics.GetOrRegisterCounter(name, nil).Inc(8)
t.Cleanup(func() { metrics.DefaultRegistry.Unregister(name) })
h := newGraphiteHost(t, 0)
s, c := newTestStatsServer(t)
setStatsConfig(c, map[string]any{"type": "graphite", "interval": "4s", "prefix": "pfx", "host": h.ln.Addr().String()})
cfg, err := loadStatsConfig(c)
require.NoError(t, err)
s.runMu.Lock()
fns, _ := s.buildRuntime(t.Context(), cfg)
s.runMu.Unlock()
for _, fn := range fns {
fn()
}
b := readExport(t, h.next(t, 5*time.Second))
assert.Contains(t, string(b), "pfx."+name+".count 8 ")
assert.Contains(t, string(b), "pfx."+name+".count_ps 2.00 ")
}
func TestStatsServer_graphiteFailureIsLogged(t *testing.T) {
logs := &lockedBuffer{}
s, c := newTestStatsServer(t)
s.l = test.NewLoggerWithOutput(logs)
setStatsConfig(c, map[string]any{"type": "graphite", "interval": "1h", "host": "127.0.0.1:" + freeTCPPort(t)})
cfg, err := loadStatsConfig(c)
require.NoError(t, err)
s.runMu.Lock()
fns, _ := s.buildRuntime(t.Context(), cfg)
s.runMu.Unlock()
for _, fn := range fns {
fn()
}
assert.Contains(t, logs.String(), "Graphite export failed")
}
// Stop abandons the running export, so it goes through Start rather than handing buildRuntime a ctx, and a stop is
// not logged as a failure
func TestStatsServer_stopAbandonsGraphiteSend(t *testing.T) {
bigGraphiteRegistry(metrics.DefaultRegistry, t)
h := newGraphiteHost(t, 4096)
logs := &lockedBuffer{}
s, c := newTestStatsServer(t)
s.l = test.NewLoggerWithOutput(logs)
setStatsConfig(c, map[string]any{"type": "graphite", "interval": "50ms", "host": h.ln.Addr().String()})
require.NoError(t, s.reload(c, true))
started := make(chan struct{})
go func() {
s.Start()
close(started)
}()
stuck := h.next(t, 30*time.Second)
s.Stop()
select {
case <-started:
case <-time.After(5 * time.Second):
t.Fatal("Start did not return after Stop")
}
// A closed sender resets the connection once it sees this, one still sending just buffers it. Either way the
// read below doesn't have to drain the export through the small window to find out
_, err := stuck.Write([]byte("x"))
require.NoError(t, err)
require.NoError(t, stuck.SetReadDeadline(time.Now().Add(10*time.Second)))
n, err := io.Copy(io.Discard, stuck)
var ne net.Error
if errors.As(err, &ne) && ne.Timeout() {
t.Fatalf("the send kept the connection after Stop, read %d bytes", n)
}
assert.Less(t, n, int64(1<<20), "the send kept going after Stop")
// The capture loop logs on its own goroutine after Start has returned, give it the chance
assert.Never(t, func() bool { return strings.Contains(logs.String(), "Graphite export failed") }, 500*time.Millisecond, 10*time.Millisecond, "a stop is not a failure")
}
+12 -9
View File
@@ -54,8 +54,7 @@ type HandshakeConfig struct {
}
type HandshakeManager struct {
// Mutex for interacting with the vpnIps and indexes maps.
// Lock order is hostmap, then this lock, then the lighthouse, then a RemoteList.
// Mutex for interacting with the vpnIps and indexes maps
sync.RWMutex
vpnIps map[netip.Addr]*HandshakeHostInfo
@@ -260,6 +259,14 @@ func (hm *HandshakeManager) handleOutbound(vpnIp netip.Addr, lighthouseTriggered
"style": header.SubTypeName(header.Handshake, hh.machine.Subtype()),
}
// Get a remotes object if we don't already have one.
// This is mainly to protect us as this should never be the case
// NB ^ This comment doesn't jive. It's how the thing gets initialized.
// It's the common path. Should it update every time, in case a future LH query/queries give us more info?
if hostinfo.remotes == nil {
hostinfo.remotes = hm.lightHouse.QueryCache([]netip.Addr{vpnIp})
}
remotes := hostinfo.remotes.CopyAddrs(hm.mainHostMap.GetPreferredRanges())
remotesHaveChanged := !slices.Equal(remotes, hh.lastRemotes)
@@ -364,9 +371,6 @@ func (hm *HandshakeManager) StartHandshake(vpnAddr netip.Addr, cacheCb func(*Han
hostinfo := &HostInfo{
vpnAddrs: []netip.Addr{vpnAddr},
HandshakePacket: make(map[uint8][]byte, 0),
// Attached here so a pending hostinfo never exists without one: SetRemote dereferences
// it, and create-tunnel -address can reach SetRemote before the handshake loop runs.
remotes: hm.lightHouse.QueryCache([]netip.Addr{vpnAddr}),
relayState: RelayState{
relays: nil,
relayForByAddr: map[netip.Addr]*Relay{},
@@ -942,14 +946,13 @@ func (hm *HandshakeManager) continueHandshake(via ViaSender, hh *HandshakeHostIn
hm.DeleteHostInfo(hostinfo)
hm.StartHandshake(hostinfo.vpnAddrs[0], func(newHH *HandshakeHostInfo) {
newHH.hostinfo.remotes = hostinfo.remotes
newHH.hostinfo.remotes.BlockRemote(via)
newHH.packetStore = hh.packetStore
hh.packetStore = []*cachedPacket{}
hostinfo.vpnAddrs = vpnAddrs
f.sendCloseTunnel(hostinfo)
})
// sendCloseTunnel may take the hostmap lock, so it must not run under the handshake
// manager lock that StartHandshake holds around the callback.
hostinfo.vpnAddrs = vpnAddrs
f.sendCloseTunnel(hostinfo)
return
}
+2 -68
View File
@@ -11,7 +11,6 @@ import (
"github.com/slackhq/nebula/test"
"github.com/slackhq/nebula/udp"
"github.com/stretchr/testify/assert"
"github.com/stretchr/testify/require"
)
func Test_NewHandshakeManagerVpnIp(t *testing.T) {
@@ -43,6 +42,8 @@ func Test_NewHandshakeManagerVpnIp(t *testing.T) {
i2 := blah.StartHandshake(ip, nil)
assert.Same(t, i, i2)
i.remotes = NewRemoteList([]netip.Addr{}, nil)
// Adding something to pending should not affect the main hostmap
assert.Empty(t, mainHM.Hosts)
@@ -234,70 +235,3 @@ func TestHandleIncomingDispatch(t *testing.T) {
assert.Empty(t, hm.indexes, "orphan stage-2 must not create state")
})
}
// Test_PendingHandshakeHasRemotes covers create-tunnel -address: a pending hostinfo must already
// carry its RemoteList when StartHandshake runs its callback, so SetRemote there, before the
// handshake loop has run, is safe and the address becomes one the handshake is sent to.
func Test_PendingHandshakeHasRemotes(t *testing.T) {
l := test.NewLogger()
mainHM := newHostMap(l)
preferredRanges := []netip.Prefix{}
mainHM.preferredRanges.Store(&preferredRanges)
hm := NewHandshakeManager(l, mainHM, newTestLighthouse(), &udp.NoopConn{}, defaultHandshakeConfig)
vpnIp := netip.MustParseAddr("172.1.1.2")
remote := netip.MustParseAddrPort("192.168.1.9:4242")
hi := hm.StartHandshake(vpnIp, func(hh *HandshakeHostInfo) {
require.NotNil(t, hh.hostinfo.remotes, "a pending handshake must never be without its RemoteList")
hh.hostinfo.SetRemote(remote)
})
assert.Contains(t, hi.remotes.CopyAddrs(preferredRanges), remote, "the handshake must be sent to the supplied remote")
assert.Equal(t, remote, hi.GetRemote())
// A RemoteList keeps one learned address per host, so a second remote replaces the
// first — the same behaviour change-remote has on an established tunnel.
other := netip.MustParseAddrPort("192.168.1.10:4242")
hi.SetRemote(other)
assert.Equal(t, []netip.AddrPort{other}, hi.remotes.CopyAddrs(preferredRanges))
assert.Equal(t, other, hi.GetRemote())
}
// newRemotesRaceFixture builds a handshake manager with an established tunnel to vpnAddr whose
// RemoteList is the lighthouse's cached list, the state every teardown-during-handshake race starts from.
func newRemotesRaceFixture(t *testing.T, vpnAddr netip.Addr) (*HandshakeManager, *Interface, *HostInfo) {
t.Helper()
l := test.NewLogger()
mainHM := newHostMap(l)
preferredRanges := []netip.Prefix{}
mainHM.preferredRanges.Store(&preferredRanges)
lh := newTestLighthouse()
hm := NewHandshakeManager(l, mainHM, lh, &udp.NoopConn{}, defaultHandshakeConfig)
f := &Interface{hostMap: mainHM, lightHouse: lh, handshakeManager: hm, l: l}
hm.f = f
established := &HostInfo{
vpnAddrs: []netip.Addr{vpnAddr},
localIndexId: 1,
remoteIndexId: 101,
remotes: lh.QueryCache([]netip.Addr{vpnAddr}),
HandshakePacket: map[uint8][]byte{},
}
mainHM.Lock()
mainHM.unlockedAddHostInfo(established, f)
mainHM.Unlock()
return hm, f, established
}
// With no handshake pending, tearing down the last tunnel still evicts the list.
func Test_CloseTunnelEvictsWithoutPendingHandshake(t *testing.T) {
vpnAddr := netip.MustParseAddr("172.1.1.2")
_, f, established := newRemotesRaceFixture(t, vpnAddr)
f.closeTunnel(established)
assert.NotContains(t, f.hostMap.Hosts, vpnAddr)
assert.NotContains(t, f.lightHouse.addrMap, vpnAddr)
}
-5
View File
@@ -24,11 +24,6 @@ type m = map[string]any
const (
Version uint8 = 1
Len = 16
// MaxOverhead is the most a payload grows on its way to the underlay.
// A relayed packet has two headers and two AEAD tags, one for the inner tunnel and another for the relay tunnel.
// Every supported cipher (today) has a 16 byte tag.
MaxOverhead = 2 * (Len + 16)
)
type MessageType uint8
+5 -7
View File
@@ -316,9 +316,9 @@ type cachedPacketMetrics struct {
func NewHostMapFromConfig(l *slog.Logger, c *config.C) *HostMap {
hm := newHostMap(l)
hm.reload(c, true, nil)
c.RegisterReloadCallback(func(c *config.C, r *config.Reload) {
hm.reload(c, false, r)
hm.reload(c, true)
c.RegisterReloadCallback(func(c *config.C) {
hm.reload(c, false)
})
l.Info("Main HostMap created", "preferredRanges", hm.GetPreferredRanges())
@@ -337,8 +337,7 @@ func newHostMap(l *slog.Logger) *HostMap {
}
}
// r is nil on the initial load
func (hm *HostMap) reload(c *config.C, initial bool, r *config.Reload) {
func (hm *HostMap) reload(c *config.C, initial bool) {
if initial || c.HasChanged("preferred_ranges") {
var preferredRanges []netip.Prefix
rawPreferredRanges := c.GetStringSlice("preferred_ranges", []string{})
@@ -349,9 +348,8 @@ func (hm *HostMap) reload(c *config.C, initial bool, r *config.Reload) {
if err != nil {
hm.l.Warn("Failed to parse preferred ranges, ignoring",
"error", err,
"range", rawPreferredRange,
"range", rawPreferredRanges,
)
r.Failed()
continue
}
-13
View File
@@ -447,16 +447,3 @@ func TestHostInfo_markOutOnly(t *testing.T) {
assert.True(t, h.markOut(6), "a relayed send must not consume the epoch edge")
assert.False(t, h.markOut(6))
}
// A preferred range that doesn't parse is skipped and the rest are used, the reload says one was skipped
func TestHostMap_reloadBadPreferredRangeFails(t *testing.T) {
l := test.NewLogger()
c := config.NewC(l)
require.NoError(t, c.LoadString("preferred_ranges: [10.0.0.0/8]\n"))
hm := NewHostMapFromConfig(l, c)
res := c.ReloadConfigString("preferred_ranges: [10.0.0.0/8, nope]\n")
require.NoError(t, res.Err)
assert.True(t, res.Failed)
assert.Equal(t, []netip.Prefix{netip.MustParsePrefix("10.0.0.0/8")}, hm.GetPreferredRanges())
}
+18 -35
View File
@@ -10,7 +10,6 @@ import (
"github.com/slackhq/nebula/firewall"
"github.com/slackhq/nebula/header"
"github.com/slackhq/nebula/iputil"
"github.com/slackhq/nebula/logging"
"github.com/slackhq/nebula/noiseutil"
"github.com/slackhq/nebula/overlay/batch"
"github.com/slackhq/nebula/overlay/tio"
@@ -199,8 +198,8 @@ func (f *Interface) sendInsideMessage(hostinfo *HostInfo, pkt tio.Packet, nb []b
}
err = tio.SegmentSuperpacket(pkt, func(seg []byte) error {
//relay header + header + plaintext + AEAD tag + relay tag
scratch := sendBatch.Reserve(len(seg) + header.MaxOverhead)
//relay header + header + plaintext + AEAD tag (16 bytes for both AES-GCM and ChaCha20-Poly1305) + relay tag
scratch := sendBatch.Reserve(header.Len + header.Len + len(seg) + 16 + 16)
innerPacket := f.sendInsideEncrypt(hostinfo, ci, seg, scratch[header.Len:], nb)
if innerPacket == nil {
@@ -518,9 +517,7 @@ func (f *Interface) SendVia(via *HostInfo, relay *Relay, ad, nb, out []byte, noc
err = f.writers[q].WriteTo(toSend, via.GetRemote())
if err != nil {
if l, ok := logging.RateLimited(f.l, f.udpRelayTxErrLimiter); ok {
via.logger(l).Info("Failed to WriteTo in sendVia", "error", err)
}
via.logger(f.l).Info("Failed to WriteTo in sendVia", "error", err)
}
}
@@ -529,26 +526,16 @@ func (f *Interface) sendNoMetrics(t header.MessageType, st header.MessageSubType
return
}
useRelay := !remote.IsValid() && !hostinfo.GetRemote().IsValid()
// The encrypt appends to out in place and a relayed packet is then wrapped in place,
// so out has to fit the whole packet up front or the encrypt reallocates out from under SendVia.
// We cap the MTU of tun devices and routes we create ourselves, so only a host that set a bigger MTU than we allow gets here.
need := header.Len + len(p) + ci.eKey.Overhead()
if useRelay {
// The relay tunnel runs the same cipher, and adds its own header and tag
need += header.Len + ci.eKey.Overhead()
}
if cap(out) < need {
if l, ok := logging.RateLimited(f.l, f.txOversizeLimiter); ok {
hostinfo.logger(l).Error("Dropping outbound packet, out buffer not large enough", "outCap", cap(out), "payloadLen", len(p), "relayed", useRelay)
}
return
}
fullOut := out
if useRelay {
if len(out) < header.Len {
// out always has a capacity of mtu, but not always a length greater than the header.Len.
// Grow it to make sure the next operation works.
out = out[:header.Len]
}
// Save a header's worth of data at the front of the 'out' buffer.
out = out[header.Len:header.Len]
out = out[header.Len:]
}
if noiseutil.EncryptLockNeeded {
@@ -595,22 +582,18 @@ func (f *Interface) sendNoMetrics(t header.MessageType, st header.MessageSubType
if remote.IsValid() {
err = f.writers[q].WriteTo(out, remote)
if err != nil {
if l, ok := logging.RateLimited(f.l, f.udpTxErrLimiter); ok {
hostinfo.logger(l).Error("Failed to write outgoing packet",
"error", err,
"udpAddr", remote,
)
}
hostinfo.logger(f.l).Error("Failed to write outgoing packet",
"error", err,
"udpAddr", remote,
)
}
} else if hr := hostinfo.GetRemote(); hr.IsValid() {
err = f.writers[q].WriteTo(out, hr)
if err != nil {
if l, ok := logging.RateLimited(f.l, f.udpTxErrLimiter); ok {
hostinfo.logger(l).Error("Failed to write outgoing packet",
"error", err,
"udpAddr", hr,
)
}
hostinfo.logger(f.l).Error("Failed to write outgoing packet",
"error", err,
"udpAddr", hr,
)
}
} else {
// Try to send via a relay
+23 -31
View File
@@ -24,7 +24,6 @@ import (
"github.com/slackhq/nebula/overlay"
"github.com/slackhq/nebula/overlay/batch"
"github.com/slackhq/nebula/overlay/tio"
"github.com/slackhq/nebula/ratelimit"
"github.com/slackhq/nebula/udp"
)
@@ -125,10 +124,6 @@ type Interface struct {
batchers []*batch.MultiCoalescer
wg sync.WaitGroup
udpTxErrLimiter *ratelimit.Limiter // udp direct transmit error log limiter
udpRelayTxErrLimiter *ratelimit.Limiter // udp relay transmit error log limiter
txOversizeLimiter *ratelimit.Limiter // oversized outbound packet drop log limiter
// fatalErr holds the first unexpected reader error that caused shutdown.
// nil means "no fatal error" (yet)
fatalErr atomic.Pointer[error]
@@ -203,19 +198,6 @@ func NewInterface(ctx context.Context, c *InterfaceConfig) (*Interface, error) {
return nil, errors.New("no connection manager")
}
udpTxErrLimiter, err := ratelimit.New(1, time.Second)
if err != nil {
return nil, err
}
udpRelayTxErrLimiter, err := ratelimit.New(1, time.Second)
if err != nil {
return nil, err
}
txOversizeLimiter, err := ratelimit.New(1, time.Second)
if err != nil {
return nil, err
}
if c.routines <= 1 {
c.PinThreads = false //pinning is not useful unless there's more than one tun reader
}
@@ -248,9 +230,6 @@ func NewInterface(ctx context.Context, c *InterfaceConfig) (*Interface, error) {
conntrackCacheTimeout: c.ConntrackCacheTimeout,
cpuAffinity: c.CpuAffinity,
pinThreads: c.PinThreads,
udpTxErrLimiter: udpTxErrLimiter,
udpRelayTxErrLimiter: udpRelayTxErrLimiter,
txOversizeLimiter: txOversizeLimiter,
metricHandshakes: metrics.GetOrRegisterHistogram("handshakes", nil, metrics.NewExpDecaySample(1028, 0.015)),
metricTxDropped: metrics.GetOrRegisterCounter("udp.tx.dropped", nil),
@@ -509,11 +488,10 @@ func (f *Interface) flushSendBatch(sb *batch.SendBatch, q int) {
func (f *Interface) RegisterConfigChangeCallbacks(c *config.C) {
c.RegisterReloadCallback(f.reloadFirewall)
for _, reload := range []func(*config.C){
f.reloadSendRecvError, f.reloadAcceptRecvError, f.reloadDisconnectInvalid, f.reloadMisc,
} {
c.RegisterReloadCallback(func(c *config.C, _ *config.Reload) { reload(c) })
}
c.RegisterReloadCallback(f.reloadSendRecvError)
c.RegisterReloadCallback(f.reloadAcceptRecvError)
c.RegisterReloadCallback(f.reloadDisconnectInvalid)
c.RegisterReloadCallback(f.reloadMisc)
for _, udpConn := range f.writers {
c.RegisterReloadCallback(udpConn.ReloadConfig)
@@ -530,7 +508,7 @@ func (f *Interface) reloadDisconnectInvalid(c *config.C) {
}
}
func (f *Interface) reloadFirewall(c *config.C, r *config.Reload) {
func (f *Interface) reloadFirewall(c *config.C) {
cs := f.pki.getCertState()
curCert := cs.getCertificate(cert.Version2)
if curCert == nil {
@@ -549,7 +527,6 @@ func (f *Interface) reloadFirewall(c *config.C, r *config.Reload) {
fw, err := NewFirewallFromConfig(f.l, cs, c)
if err != nil {
f.l.Error("Error while creating firewall during reload", "error", err)
r.Failed()
return
}
@@ -647,15 +624,17 @@ func (f *Interface) reloadMisc(c *config.C) {
}
}
// statsEmitter updates the interface's gauges, the stats server runs it on its capture loop.
func (f *Interface) statsEmitter() func() {
func (f *Interface) emitStats(ctx context.Context, i time.Duration) {
ticker := time.NewTicker(i)
defer ticker.Stop()
udpStats := udp.NewUDPStatsEmitter(f.writers)
certExpirationGauge := metrics.GetOrRegisterGauge("certificate.ttl_seconds", nil)
certInitiatingVersion := metrics.GetOrRegisterGauge("certificate.initiating_version", nil)
certMaxVersion := metrics.GetOrRegisterGauge("certificate.max_version", nil)
return func() {
emit := func() {
f.firewall.EmitStats()
f.handshakeManager.EmitStats()
udpStats()
@@ -672,6 +651,19 @@ func (f *Interface) statsEmitter() func() {
certMaxVersion.Update(int64(certState.v1Cert.Version()))
}
}
// Prime gauges so a Prometheus scrape that lands before the first tick
// sees real values instead of the zero defaults (issue #907).
emit()
for {
select {
case <-ctx.Done():
return
case <-ticker.C:
emit()
}
}
}
func (f *Interface) GetHostInfo(vpnIp netip.Addr) *HostInfo {
+14 -5
View File
@@ -3,6 +3,7 @@
package nebula
import (
"context"
"net/netip"
"testing"
"time"
@@ -17,8 +18,11 @@ import (
"github.com/stretchr/testify/require"
)
// Priming before the first tick (issue #907) is Start's job, see TestStatsServer_Start_primes.
func Test_statsEmitter_setsGauges(t *testing.T) {
// Test_emitStats_primesGauges covers issue #907: a Prometheus scrape that
// landed before the first ticker fire used to read 0 for the cert gauges.
// emitStats now primes the gauges before entering the ticker loop. We assert
// the gauge is zero before the first call and non-zero after.
func Test_emitStats_primesGauges(t *testing.T) {
defer metrics.DefaultRegistry.UnregisterAll()
l := test.NewLogger()
@@ -52,12 +56,17 @@ func Test_statsEmitter_setsGauges(t *testing.T) {
ifce.pki.cs.Store(cs)
ttlGauge := metrics.GetOrRegisterGauge("certificate.ttl_seconds", nil)
require.Zero(t, ttlGauge.Value(), "gauge should be zero before the emitter runs")
require.Zero(t, ttlGauge.Value(), "gauge should be zero before emitStats runs")
ifce.statsEmitter()()
// Pre-cancel the context so emitStats returns after priming the gauges
// without ever reading from ticker.C. The one hour interval is just a
// belt-and-suspenders, the test does not expect the ticker to fire.
ctx, cancel := context.WithCancel(context.Background())
cancel()
ifce.emitStats(ctx, time.Hour)
ttl := ttlGauge.Value()
assert.Positive(t, ttl, "ttl gauge should be set by one run of the emitter")
assert.Positive(t, ttl, "ttl gauge should be primed by emitStats before its first tick")
assert.LessOrEqual(t, ttl, int64(3600))
assert.Equal(t, int64(cert.Version1), metrics.GetOrRegisterGauge("certificate.initiating_version", nil).Value())
assert.Equal(t, int64(cert.Version1), metrics.GetOrRegisterGauge("certificate.max_version", nil).Value())
+4 -26
View File
@@ -65,10 +65,10 @@ func TestReloadFirewall_CertUnsafeNetworksChanged(t *testing.T) {
pki.cs.Store(&CertState{v2Cert: c2, initiatingVersion: cert.Version2})
// Reload with the same YAML so HasChanged("firewall") reports false.
require.NoError(t, cfg.ReloadConfigString(rawYAML).Err)
require.NoError(t, cfg.ReloadConfigString(rawYAML))
require.False(t, cfg.HasChanged("firewall"))
f.reloadFirewall(cfg, nil)
f.reloadFirewall(cfg)
assert.NotSame(t, fw, f.firewall, "firewall pointer should have been replaced")
assert.Equal(t, newUnsafe, f.firewall.unsafeNetworks)
@@ -113,30 +113,8 @@ func TestReloadFirewall_NoChange(t *testing.T) {
l: l,
}
require.NoError(t, cfg.ReloadConfigString(rawYAML).Err)
f.reloadFirewall(cfg, nil)
require.NoError(t, cfg.ReloadConfigString(rawYAML))
f.reloadFirewall(cfg)
assert.Same(t, fw, f.firewall, "firewall should not have been replaced")
}
// Rules that don't parse keep the old firewall, and the reload says it could not apply them
func TestReloadFirewall_BadRulesFailTheReload(t *testing.T) {
l := test.NewLogger()
pki := &PKI{}
pki.cs.Store(&CertState{v2Cert: &dummyCert{version: cert.Version2, networks: []netip.Prefix{netip.MustParsePrefix("10.0.0.1/24")}}, initiatingVersion: cert.Version2})
rules := func(proto string) string {
return "firewall:\n outbound:\n - port: any\n proto: any\n host: any\n inbound:\n - port: any\n proto: " + proto + "\n host: any\n"
}
cfg := config.NewC(l)
require.NoError(t, cfg.LoadString(rules("any")))
fw, err := NewFirewallFromConfig(l, pki.getCertState(), cfg)
require.NoError(t, err)
f := &Interface{pki: pki, firewall: fw, l: l}
cfg.RegisterReloadCallback(f.reloadFirewall)
res := cfg.ReloadConfigString(rules("nope"))
require.NoError(t, res.Err)
assert.True(t, res.Failed)
assert.Same(t, fw, f.firewall)
}
+5
View File
@@ -0,0 +1,5 @@
// Package msgx calls xnu's private batched socket calls, sendmsg_x and recvmsg_x, through libSystem.
//
// The calls are not public API, so the package never links them: it looks them up with dlsym on first use.
// The package is darwin-only, and on iOS Available is always false, so App Store builds keep to public API.
package msgx
+16
View File
@@ -0,0 +1,16 @@
package msgx
import "golang.org/x/sys/unix"
// Hdr mirrors xnu's struct msghdr_x (bsd/sys/socket_private.h), which the SDK doesn't ship.
// recvmsg_x reports each message's length in Datalen rather than in its return value.
type Hdr struct {
Name *byte
Namelen uint32
Iov *unix.Iovec
Iovlen int32
Control *byte
Controllen uint32
Flags int32
Datalen uint64
}
+77
View File
@@ -0,0 +1,77 @@
//go:build !ios
package msgx
import (
"sync"
"syscall"
"unsafe"
)
// dlsym is public libSystem API, imported the way x/sys/unix imports its libSystem stubs. The local name is
// distinct from runtime/race's dlsym import.
//
//go:cgo_import_dynamic msgx_dlsym dlsym "/usr/lib/libSystem.B.dylib"
// dlsymTrampolineAddr is the address of msgx_darwin.s's jump to dlsym.
var dlsymTrampolineAddr uintptr
// syscall6X calls the C function at fn on the system stack and returns errno when it returns a 64-bit -1.
// It is how x/sys/unix calls libSystem, and the runtime keeps it linkable for that.
//
//go:linkname syscall6X syscall.syscall6X
func syscall6X(fn, a1, a2, a3, a4, a5, a6 uintptr) (r1, r2 uintptr, err syscall.Errno)
// rtldDefault is dlfcn.h's RTLD_DEFAULT, ((void *)-2): search every image loaded in the process.
const rtldDefault = ^uintptr(1)
var (
sendmsgXName = []byte("sendmsg_x\x00")
recvmsgXName = []byte("recvmsg_x\x00")
)
type funcs struct {
sendmsgX uintptr
recvmsgX uintptr
}
var resolve = sync.OnceValue(func() funcs {
return funcs{sendmsgX: lookup(sendmsgXName), recvmsgX: lookup(recvmsgXName)}
})
// lookup returns the address of the NUL-terminated C symbol name, or 0 when no loaded image exports it.
func lookup(name []byte) uintptr {
p, _, _ := syscall6X(dlsymTrampolineAddr, rtldDefault, uintptr(unsafe.Pointer(&name[0])), 0, 0, 0, 0)
return p
}
// Available reports whether libSystem exports both sendmsg_x and recvmsg_x. When it is false, Send and Recv
// return ENOSYS.
func Available() bool {
f := resolve()
return f.sendmsgX != 0 && f.recvmsgX != 0
}
// Send passes hdrs to sendmsg_x on fd and returns how many messages the kernel took.
func Send(fd uintptr, hdrs []Hdr, flags int) (int, syscall.Errno) {
return call(resolve().sendmsgX, fd, hdrs, flags)
}
// Recv passes hdrs to recvmsg_x on fd and returns how many messages it filled.
func Recv(fd uintptr, hdrs []Hdr, flags int) (int, syscall.Errno) {
return call(resolve().recvmsgX, fd, hdrs, flags)
}
func call(fn, fd uintptr, hdrs []Hdr, flags int) (int, syscall.Errno) {
if fn == 0 {
return 0, syscall.ENOSYS
}
if len(hdrs) == 0 {
return 0, syscall.EINVAL
}
r, _, errno := syscall6X(fn, fd, uintptr(unsafe.Pointer(&hdrs[0])), uintptr(len(hdrs)), uintptr(flags), 0, 0)
if errno != 0 {
return 0, errno
}
return int(r), 0
}
+9
View File
@@ -0,0 +1,9 @@
//go:build !ios
#include "textflag.h"
// The same trampoline shape x/sys/unix uses for its libSystem stubs; it assembles for amd64 and arm64 alike.
TEXT msgx_dlsym_trampoline<>(SB),NOSPLIT,$0-0
JMP msgx_dlsym(SB)
GLOBL ·dlsymTrampolineAddr(SB), RODATA, $8
DATA ·dlsymTrampolineAddr(SB)/8, $msgx_dlsym_trampoline<>(SB)
+69
View File
@@ -0,0 +1,69 @@
//go:build !ios
package msgx
import (
"bytes"
"syscall"
"testing"
"github.com/stretchr/testify/assert"
"github.com/stretchr/testify/require"
"golang.org/x/sys/unix"
)
// TestAvailable pins that dlsym finds both calls in this macOS's libSystem, so the batched paths are live.
func TestAvailable(t *testing.T) {
assert.True(t, Available())
}
// TestSendRecvRoundTrip pins the libSystem calling path end to end: a batch goes out through sendmsg_x in one
// call and comes back through recvmsg_x in one call, each message whole, in order, with Datalen set.
func TestSendRecvRoundTrip(t *testing.T) {
fds, err := unix.Socketpair(unix.AF_UNIX, unix.SOCK_DGRAM, 0)
require.NoError(t, err)
t.Cleanup(func() {
_ = unix.Close(fds[0])
_ = unix.Close(fds[1])
})
// A dropped datagram fails the receive instead of hanging it.
require.NoError(t, unix.SetsockoptTimeval(fds[1], unix.SOL_SOCKET, unix.SO_RCVTIMEO, &unix.Timeval{Sec: 2}))
const n = 5
var want [n][]byte
var iovs [n]unix.Iovec
hdrs := make([]Hdr, n)
for i := range n {
want[i] = bytes.Repeat([]byte{byte(i + 1)}, 10+i)
iovs[i] = unix.Iovec{Base: &want[i][0]}
iovs[i].SetLen(len(want[i]))
hdrs[i] = Hdr{Iov: &iovs[i], Iovlen: 1}
}
sent, errno := Send(uintptr(fds[0]), hdrs, 0)
require.Zero(t, errno)
require.Equal(t, n, sent)
var bufs [n + 1][64]byte
var riovs [n + 1]unix.Iovec
rhdrs := make([]Hdr, n+1)
for i := range rhdrs {
riovs[i] = unix.Iovec{Base: &bufs[i][0]}
riovs[i].SetLen(len(bufs[i]))
rhdrs[i] = Hdr{Iov: &riovs[i], Iovlen: 1}
}
got, errno := Recv(uintptr(fds[1]), rhdrs, 0)
require.Zero(t, errno)
require.Equal(t, n, got)
for i := range n {
l := int(rhdrs[i].Datalen)
assert.Equal(t, want[i], bufs[i][:l], "message %d", i)
}
}
// TestEmptyBatch pins that an empty batch is refused before it reaches the kernel.
func TestEmptyBatch(t *testing.T) {
_, errno := Send(0, nil, 0)
assert.Equal(t, syscall.EINVAL, errno)
_, errno = Recv(0, nil, 0)
assert.Equal(t, syscall.EINVAL, errno)
}
+12
View File
@@ -0,0 +1,12 @@
package msgx
import "syscall"
// Available is always false on iOS, so App Store builds never look up private symbols.
func Available() bool { return false }
// Send always returns ENOSYS on iOS.
func Send(uintptr, []Hdr, int) (int, syscall.Errno) { return 0, syscall.ENOSYS }
// Recv always returns ENOSYS on iOS.
func Recv(uintptr, []Hdr, int) (int, syscall.Errno) { return 0, syscall.ENOSYS }
+9 -38
View File
@@ -15,7 +15,6 @@ import (
"time"
"github.com/gaissmai/bart"
"github.com/rcrowley/go-metrics"
"github.com/slackhq/nebula/cert"
"github.com/slackhq/nebula/config"
"github.com/slackhq/nebula/header"
@@ -82,8 +81,6 @@ type LightHouse struct {
updateTrigger chan struct{}
queryChan chan netip.Addr
// queryDropped counts queries QueryServer dropped because queryChan was full.
queryDropped metrics.Counter
calculatedRemotes atomic.Pointer[bart.Table[[]*calculatedRemote]] // Maps VpnAddr to []*calculatedRemote
@@ -119,8 +116,7 @@ func NewLightHouseFromConfig(ctx context.Context, l *slog.Logger, c *config.C, c
nebulaPort: nebulaPort,
punchy: p,
updateTrigger: make(chan struct{}, 1),
queryChan: make(chan netip.Addr, c.GetUint32("handshakes.query_buffer", 1024)),
queryDropped: metrics.GetOrRegisterCounter("lighthouse.query.dropped", nil),
queryChan: make(chan netip.Addr, c.GetUint32("handshakes.query_buffer", 64)),
l: l,
}
h.localAddrsFn = func(al *LocalAllowList) []netip.Addr {
@@ -138,21 +134,18 @@ func NewLightHouseFromConfig(ctx context.Context, l *slog.Logger, c *config.C, c
h.metrics = newLighthouseMetrics()
}
err := h.reload(c, true, nil)
err := h.reload(c, true)
if err != nil {
return nil, err
}
c.RegisterReloadCallback(func(c *config.C, r *config.Reload) {
r.RestartRequiredIfChanged("lighthouse.am_lighthouse", "listen.port", "handshakes.query_buffer", "stats.lighthouse_metrics")
err := h.reload(c, false, r)
c.RegisterReloadCallback(func(c *config.C) {
err := h.reload(c, false)
switch v := err.(type) {
case *util.ContextualError:
v.Log(l)
r.Failed()
case error:
l.Error("failed to reload lighthouse", "error", err)
r.Failed()
}
})
@@ -193,8 +186,7 @@ func (lh *LightHouse) GetUpdateInterval() int64 {
return lh.interval.Load()
}
// r is nil on the initial load
func (lh *LightHouse) reload(c *config.C, initial bool, r *config.Reload) error {
func (lh *LightHouse) reload(c *config.C, initial bool) error {
if initial || c.HasChanged("lighthouse.advertise_addrs") {
rawAdvAddrs := c.GetStringSlice("lighthouse.advertise_addrs", []string{})
advAddrs := make([]netip.AddrPort, 0)
@@ -229,7 +221,6 @@ func (lh *LightHouse) reload(c *config.C, initial bool, r *config.Reload) error
"addr", rawAddr,
"entry", i+1,
)
r.Failed()
continue
}
@@ -364,13 +355,7 @@ func (lh *LightHouse) reload(c *config.C, initial bool, r *config.Reload) error
}
}
// am_relay decides whether relay.relays applies to us at all
if initial || c.HasChanged("relay.relays") || c.HasChanged("relay.am_relay") {
var before []netip.Addr
if !initial {
before = lh.GetRelaysForMe()
}
if initial || c.HasChanged("relay.relays") {
switch c.GetBool("relay.am_relay", false) {
case true:
// Relays aren't allowed to specify other relays
@@ -388,7 +373,6 @@ func (lh *LightHouse) reload(c *config.C, initial bool, r *config.Reload) error
"relay", v,
"error", err,
)
r.Failed()
} else {
lh.l.Info("Read relay from config", "relay", v)
relaysForMe = append(relaysForMe, configRIP)
@@ -396,11 +380,6 @@ func (lh *LightHouse) reload(c *config.C, initial bool, r *config.Reload) error
}
lh.relaysForMe.Store(&relaysForMe)
}
// Tell the lighthouses now rather than at the next interval, but only when what we advertise changed
if !initial && !slices.Equal(before, lh.GetRelaysForMe()) {
lh.TriggerUpdate()
}
}
return nil
@@ -533,19 +512,14 @@ func (lh *LightHouse) Query(vpnAddr netip.Addr) *RemoteList {
return nil
}
// QueryServer is asynchronous and non-blocking, no reply should be expected.
// If the query channel is full, the query is dropped.
// QueryServer is asynchronous so no reply should be expected
func (lh *LightHouse) QueryServer(vpnAddr netip.Addr) {
// Don't put lighthouse addrs in the query channel because we can't query lighthouses about lighthouses
if lh.amLighthouse || lh.IsLighthouseAddr(vpnAddr) {
return
}
select {
case lh.queryChan <- vpnAddr:
default:
lh.queryDropped.Inc(1)
}
lh.queryChan <- vpnAddr
}
func (lh *LightHouse) QueryCache(vpnAddrs []netip.Addr) *RemoteList {
@@ -1261,13 +1235,10 @@ func (lhh *LightHouseHandler) handleHostQuery(n *NebulaMeta, fromVpnAddrs []neti
// sendHostPunchNotification signals the other side to punch some zero byte udp packets
func (lhh *LightHouseHandler) sendHostPunchNotification(n *NebulaMeta, fromVpnAddrs []netip.Addr, punchNotifDest netip.Addr, w EncWriter) {
whereToPunch := fromVpnAddrs[0]
// Resolve the target before taking the querier's RemoteList lock below. GetHostInfo takes the
// hostmap lock, and the hostmap is taken before the lighthouse, which is taken before a
// RemoteList, so looking it up inside the callback would deadlock.
targetHI := lhh.lh.ifce.GetHostInfo(punchNotifDest)
found, ln, err := lhh.lh.queryAndPrepMessage(whereToPunch, func(c *cache) (int, error) {
n = lhh.resetMeta()
n.Type = NebulaMeta_HostPunchNotification
targetHI := lhh.lh.ifce.GetHostInfo(punchNotifDest)
var useVersion cert.Version
if targetHI == nil {
useVersion = lhh.lh.ifce.GetCertState().initiatingVersion
+10 -257
View File
@@ -6,16 +6,13 @@ import (
"errors"
"fmt"
"net/netip"
"sync"
"testing"
"time"
"github.com/gaissmai/bart"
"github.com/slackhq/nebula/cert"
"github.com/slackhq/nebula/config"
"github.com/slackhq/nebula/header"
"github.com/slackhq/nebula/test"
"github.com/slackhq/nebula/udp"
"github.com/stretchr/testify/assert"
"github.com/stretchr/testify/require"
"go.yaml.in/yaml/v3"
@@ -87,15 +84,15 @@ func TestReloadLighthouseInterval(t *testing.T) {
lh.ifce = &mockEncWriter{}
// The first one routine is kicked off by main.go currently, lets make sure that one dies
require.NoError(t, c.ReloadConfigString("lighthouse:\n interval: 5").Err)
require.NoError(t, c.ReloadConfigString("lighthouse:\n interval: 5"))
assert.Equal(t, int64(5), lh.interval.Load())
// Subsequent calls are killed off by the LightHouse.Reload function
require.NoError(t, c.ReloadConfigString("lighthouse:\n interval: 10").Err)
require.NoError(t, c.ReloadConfigString("lighthouse:\n interval: 10"))
assert.Equal(t, int64(10), lh.interval.Load())
// If this completes then nothing is stealing our reload routine
require.NoError(t, c.ReloadConfigString("lighthouse:\n interval: 11").Err)
require.NoError(t, c.ReloadConfigString("lighthouse:\n interval: 11"))
assert.Equal(t, int64(11), lh.interval.Load())
}
@@ -296,7 +293,7 @@ func TestLighthouse_reload(t *testing.T) {
require.NoError(t, err)
c.ReloadConfigString(string(rc))
err = lh.reload(c, false, nil)
err = lh.reload(c, false)
require.NoError(t, err)
}
@@ -334,7 +331,7 @@ func TestLighthouse_reloadStaticHostMap(t *testing.T) {
}
rc, err := yaml.Marshal(nc)
require.NoError(t, err)
require.NoError(t, c.ReloadConfigString(string(rc)).Err)
require.NoError(t, c.ReloadConfigString(string(rc)))
rl := lh.Query(staticHost)
require.NotNil(t, rl)
@@ -350,7 +347,7 @@ func TestLighthouse_reloadStaticHostMap(t *testing.T) {
}
rc, err = yaml.Marshal(nc)
require.NoError(t, err)
require.NoError(t, c.ReloadConfigString(string(rc)).Err)
require.NoError(t, c.ReloadConfigString(string(rc)))
rl = lh.Query(staticHost)
require.NotNil(t, rl)
@@ -358,7 +355,7 @@ func TestLighthouse_reloadStaticHostMap(t *testing.T) {
assert.Equal(t, []netip.AddrPort{netip.MustParseAddrPort("1.1.1.1:4242")}, rl.CopyAddrs([]netip.Prefix{}))
// Reload with the same config. An unchanged entry must not duplicate.
require.NoError(t, c.ReloadConfigString(string(rc)).Err)
require.NoError(t, c.ReloadConfigString(string(rc)))
rl = lh.Query(staticHost)
require.NotNil(t, rl)
@@ -373,7 +370,7 @@ func TestLighthouse_reloadStaticHostMap(t *testing.T) {
}
rc, err = yaml.Marshal(nc)
require.NoError(t, err)
require.NoError(t, c.ReloadConfigString(string(rc)).Err)
require.NoError(t, c.ReloadConfigString(string(rc)))
// Add a second host alongside the first. Both should be present, neither duplicated.
nc = map[string]any{
@@ -384,7 +381,7 @@ func TestLighthouse_reloadStaticHostMap(t *testing.T) {
}
rc, err = yaml.Marshal(nc)
require.NoError(t, err)
require.NoError(t, c.ReloadConfigString(string(rc)).Err)
require.NoError(t, c.ReloadConfigString(string(rc)))
rl = lh.Query(staticHost)
require.NotNil(t, rl)
@@ -406,7 +403,7 @@ func TestLighthouse_reloadStaticHostMap(t *testing.T) {
}
rc, err = yaml.Marshal(nc)
require.NoError(t, err)
require.NoError(t, c.ReloadConfigString(string(rc)).Err)
require.NoError(t, c.ReloadConfigString(string(rc)))
_, isStatic := lh.GetStaticHostList()[staticHost]
assert.False(t, isStatic)
@@ -798,247 +795,3 @@ func TestLightHouse_logLocalAddrsErr(t *testing.T) {
lh.logLocalAddrsErr(errors.New("something else"))
assert.Contains(t, out.String(), "level=WARN")
}
// heldEncWriter holds the query worker in its first GetHostInfo until release closes.
type heldEncWriter struct {
mockEncWriter
once sync.Once
held chan struct{}
release chan struct{}
}
func (w *heldEncWriter) GetHostInfo(netip.Addr) *HostInfo {
w.once.Do(func() { close(w.held) })
<-w.release
return nil
}
// QueryServer never waits on the query worker, since the packet readers call it and nothing drains the channel at
// shutdown; a query that finds the channel full is dropped and counted. The worker is held on its first query so the
// channel fills.
func TestLighthouse_QueryServerDoesNotBlock(t *testing.T) {
l := test.NewLogger()
cs := testCertState(netip.MustParsePrefix("10.128.0.1/16"))
lh1 := "10.128.0.2"
c := config.NewC(l)
c.Settings["lighthouse"] = map[string]any{"hosts": []any{lh1}}
c.Settings["static_host_map"] = map[string]any{lh1: []any{"1.1.1.1:4242"}}
c.Settings["handshakes"] = map[string]any{"query_buffer": 1}
lh, err := NewLightHouseFromConfig(t.Context(), l, c, cs, nil, nil)
require.NoError(t, err)
w := &heldEncWriter{held: make(chan struct{}), release: make(chan struct{})}
lh.ifce = w
t.Cleanup(func() { close(w.release) })
lh.QueryServer(netip.MustParseAddr("10.128.0.10"))
select {
case <-w.held:
case <-time.After(5 * time.Second):
t.Fatal("the query worker never took the first query")
}
dropped := lh.queryDropped.Count()
done := make(chan struct{})
go func() {
lh.QueryServer(netip.MustParseAddr("10.128.0.11"))
lh.QueryServer(netip.MustParseAddr("10.128.0.12"))
close(done)
}()
select {
case <-done:
case <-time.After(5 * time.Second):
t.Fatal("QueryServer blocked on a full query channel")
}
assert.EqualValues(t, 1, lh.queryDropped.Count()-dropped)
}
// hostmapEncWriter answers GetHostInfo from a real hostmap, the way Interface does.
type hostmapEncWriter struct {
mockEncWriter
hm *HostMap
}
func (w *hostmapEncWriter) GetHostInfo(a netip.Addr) *HostInfo { return w.hm.QueryVpnAddr(a) }
func (w *hostmapEncWriter) GetCertState() *CertState {
return &CertState{initiatingVersion: cert.Version1}
}
// A lighthouse runs four paths that each hold one lock while waiting for the next: CheckAndComplete
// holds the hostmap and takes the handshake manager, StartHandshake holds the handshake manager and
// takes the lighthouse, a host update holds the lighthouse and takes the sender's RemoteList, and a
// punch notification holds the querier's RemoteList while it resolves the target. If that last step
// reaches the hostmap under the RemoteList lock, the four deadlock. Drive them all at once.
func TestLighthouse_PunchNotificationDoesNotCloseLockCycle(t *testing.T) {
l := test.NewLogger()
myVpnNet := netip.MustParsePrefix("10.128.0.1/24")
c := config.NewC(l)
c.Settings["lighthouse"] = map[string]any{"am_lighthouse": true}
c.Settings["listen"] = map[string]any{"port": 4242}
lh, err := NewLightHouseFromConfig(t.Context(), l, c, testCertState(myVpnNet), nil, nil)
require.NoError(t, err)
mainHM := newHostMap(l)
pr := []netip.Prefix{}
mainHM.preferredRanges.Store(&pr)
lh.ifce = &hostmapEncWriter{hm: mainHM}
hm := NewHandshakeManager(l, mainHM, lh, &udp.NoopConn{}, defaultHandshakeConfig)
f := &Interface{hostMap: mainHM, lightHouse: lh, handshakeManager: hm, l: l}
hm.f = f
peer := netip.MustParseAddr("10.128.0.2")
peerUdp := netip.MustParseAddrPort("10.0.0.2:4242")
target := netip.MustParseAddr("10.128.0.3")
targetUdp := netip.MustParseAddrPort("10.0.0.3:4242")
outbound := netip.MustParseAddr("10.128.0.4")
inbound := netip.MustParseAddr("10.128.0.5")
seed := lh.NewRequestHandler()
newLHHostUpdate(peerUdp, peer, []netip.AddrPort{peerUdp}, seed)
newLHHostUpdate(targetUdp, target, []netip.AddrPort{targetUdp}, seed)
stop := make(chan struct{})
var wg sync.WaitGroup
loop := func(body func()) {
defer wg.Done()
for {
select {
case <-stop:
return
default:
body()
}
}
}
wg.Add(4)
// Outbound handshakes keep starting and being dropped.
go loop(func() {
hm.DeleteHostInfo(hm.StartHandshake(outbound, nil))
})
// Inbound handshakes keep completing and being torn down.
var idx uint32
go loop(func() {
idx++
hi := &HostInfo{
vpnAddrs: []netip.Addr{inbound},
localIndexId: idx,
remoteIndexId: idx,
remotes: lh.QueryCache([]netip.Addr{inbound}),
HandshakePacket: map[uint8][]byte{handshakePacketStage0: {byte(idx)}},
}
if _, err := hm.CheckAndComplete(hi, handshakePacketStage0, f); err == nil {
mainHM.DeleteHostInfo(hi)
}
})
// The peer keeps sending host updates.
updates := lh.NewRequestHandler()
go loop(func() {
newLHHostUpdate(peerUdp, peer, []netip.AddrPort{peerUdp}, updates)
})
// The same peer keeps querying for the target, which ends in a punch notification.
queries := lh.NewRequestHandler()
go loop(func() {
sendLHHostRequest(peerUdp, peer, target, queries, nil)
})
time.Sleep(time.Second)
close(stop)
done := make(chan struct{})
go func() { wg.Wait(); close(done) }()
select {
case <-done:
case <-time.After(5 * time.Second):
t.Fatal("deadlock: the lighthouse paths never finished after stop was signalled")
}
}
func TestLighthouse_reloadRelaysTriggersUpdate(t *testing.T) {
l := test.NewLogger()
c := config.NewC(l)
base := "lighthouse:\n am_lighthouse: true\nlisten:\n port: 4242\n"
require.NoError(t, c.LoadString(base+"relay:\n relays: [10.128.0.5]\n"))
lh, err := NewLightHouseFromConfig(t.Context(), l, c, testCertState(netip.MustParsePrefix("10.128.0.1/24")), nil, nil)
require.NoError(t, err)
assert.Empty(t, lh.updateTrigger)
require.NoError(t, c.ReloadConfigString(base+"relay:\n relays: [10.128.0.6]\n").Err)
assert.Equal(t, []netip.Addr{netip.MustParseAddr("10.128.0.6")}, lh.GetRelaysForMe())
require.Len(t, lh.updateTrigger, 1)
<-lh.updateTrigger
// The config changed but what we advertise did not, a bad entry is skipped
require.NoError(t, c.ReloadConfigString(base+"relay:\n relays: [10.128.0.6, nope]\n").Err)
assert.Equal(t, []netip.Addr{netip.MustParseAddr("10.128.0.6")}, lh.GetRelaysForMe())
assert.Empty(t, lh.updateTrigger)
}
func TestLighthouse_reloadAmRelayAlone(t *testing.T) {
l := test.NewLogger()
c := config.NewC(l)
base := "lighthouse:\n am_lighthouse: true\nlisten:\n port: 4242\nrelay:\n relays: [10.128.0.5]\n"
require.NoError(t, c.LoadString(base+" am_relay: false\n"))
lh, err := NewLightHouseFromConfig(t.Context(), l, c, testCertState(netip.MustParsePrefix("10.128.0.1/24")), nil, nil)
require.NoError(t, err)
assert.Equal(t, []netip.Addr{netip.MustParseAddr("10.128.0.5")}, lh.GetRelaysForMe())
// Relays aren't allowed to have relays, flipping am_relay alone must drop them and tell the lighthouses
require.NoError(t, c.ReloadConfigString(base+" am_relay: true\n").Err)
assert.Empty(t, lh.GetRelaysForMe())
require.Len(t, lh.updateTrigger, 1)
<-lh.updateTrigger
require.NoError(t, c.ReloadConfigString(base+" am_relay: false\n").Err)
assert.Equal(t, []netip.Addr{netip.MustParseAddr("10.128.0.5")}, lh.GetRelaysForMe())
require.Len(t, lh.updateTrigger, 1)
}
func TestLighthouse_reloadRestartRequired(t *testing.T) {
l := test.NewLogger()
c := config.NewC(l)
base := "lighthouse:\n am_lighthouse: true\n"
require.NoError(t, c.LoadString(base+"listen:\n port: 4242\n"))
_, err := NewLightHouseFromConfig(t.Context(), l, c, testCertState(netip.MustParsePrefix("10.128.0.1/24")), nil, nil)
require.NoError(t, err)
res := c.ReloadConfigString(base + "listen:\n port: 4242\n")
require.NoError(t, res.Err)
assert.False(t, res.RestartRequired)
res = c.ReloadConfigString(base + "listen:\n port: 4243\n")
require.NoError(t, res.Err)
assert.True(t, res.RestartRequired)
}
// A relay that doesn't parse is skipped and the rest are used, the reload says one was skipped
func TestLighthouse_reloadBadRelayFails(t *testing.T) {
l := test.NewLogger()
c := config.NewC(l)
require.NoError(t, c.LoadString("listen:\n port: 4242\n"))
lh, err := NewLightHouseFromConfig(t.Context(), l, c, testCertState(netip.MustParsePrefix("10.128.0.1/24")), nil, nil)
require.NoError(t, err)
res := c.ReloadConfigString("listen:\n port: 4242\nrelay:\n relays: [10.128.0.2, nope]\n")
require.NoError(t, res.Err)
assert.True(t, res.Failed)
assert.Equal(t, []netip.Addr{netip.MustParseAddr("10.128.0.2")}, lh.GetRelaysForMe())
}
// An advertise_addrs entry inside our own network is skipped and the rest are used, the reload says one was skipped
func TestLighthouse_reloadAdvertiseAddrInNetworkFails(t *testing.T) {
l := test.NewLogger()
c := config.NewC(l)
require.NoError(t, c.LoadString("listen:\n port: 4242\n"))
lh, err := NewLightHouseFromConfig(t.Context(), l, c, testCertState(netip.MustParsePrefix("10.128.0.1/24")), nil, nil)
require.NoError(t, err)
res := c.ReloadConfigString("listen:\n port: 4242\nlighthouse:\n advertise_addrs: [\"1.2.3.4:4242\", \"10.128.0.5:4242\"]\n")
require.NoError(t, res.Err)
assert.True(t, res.Failed)
assert.Equal(t, []netip.AddrPort{netip.MustParseAddrPort("1.2.3.4:4242")}, lh.GetAdvertiseAddrs())
}
-31
View File
@@ -1,31 +0,0 @@
package logging
import "log/slog"
// RateLimiter is what RateLimited needs from a rate limiter, such as a *ratelimit.Limiter.
// Allow reports whether this call may proceed, and how many calls were denied since the last one that did.
type RateLimiter interface {
Allow() (denied uint64, ok bool)
}
// RateLimited checks lim before anything is built.
// When allowed it returns l, with a "suppressed" count attached if lim denied calls since its last allowed one.
// A nil lim allows everything.
//
// if l, ok := logging.RateLimited(f.l, f.udpTxErrLimiter); ok {
// hostinfo.logger(l).Error("Failed to write outgoing packet", "error", err)
// }
func RateLimited(l *slog.Logger, lim RateLimiter) (*slog.Logger, bool) {
if lim == nil {
return l, true
}
denied, ok := lim.Allow()
if !ok {
return nil, false
}
if denied > 0 {
return l.With("suppressed", denied), true
}
return l, true
}
-106
View File
@@ -1,106 +0,0 @@
package logging
import (
"bytes"
"errors"
"io"
"log/slog"
"net/netip"
"strings"
"testing"
"time"
"github.com/slackhq/nebula/ratelimit"
)
type fakeLimiter struct {
denied uint64
ok bool
}
func (f fakeLimiter) Allow() (uint64, bool) { return f.denied, f.ok }
func TestRateLimited(t *testing.T) {
var buf bytes.Buffer
base := NewLogger(&buf)
if l, ok := RateLimited(base, fakeLimiter{ok: false}); ok || l != nil {
t.Fatalf("denied call: ok=%v logger=%v", ok, l)
}
if l, ok := RateLimited(base, fakeLimiter{ok: true}); !ok || l != base {
t.Fatal("nothing denied should hand back the same logger")
}
if l, ok := RateLimited(base, nil); !ok || l != base {
t.Fatal("a nil limiter should allow with the same logger")
}
l, ok := RateLimited(base, fakeLimiter{denied: 7, ok: true})
if !ok {
t.Fatal("allowed call denied")
}
l.Info("hello", "k", "v")
if !strings.Contains(buf.String(), "suppressed=7") {
t.Fatalf("want suppressed=7, got %q", buf.String())
}
}
// The benchmarks compare a log line through slog directly against the same line behind RateLimited: logged with
// nothing denied, denied, and logged after denials.
var (
benchErr = errors.New("sendto: no buffer space available")
benchAddr = netip.MustParseAddrPort("192.0.2.1:4242")
)
func benchLogger() *slog.Logger {
return NewLogger(io.Discard).With("localIndex", 1234, "remoteIndex", 5678)
}
func BenchmarkRateLimitedBaseline(b *testing.B) {
lg := benchLogger()
b.ReportAllocs()
for i := 0; i < b.N; i++ {
lg.Error("Failed to write outgoing packet", "error", benchErr, "udpAddr", benchAddr)
}
}
func BenchmarkRateLimitedAllowed(b *testing.B) {
lg, lim := benchLogger(), mustLimiter(b, 1, 0)
b.ReportAllocs()
for i := 0; i < b.N; i++ {
if l, ok := RateLimited(lg, lim); ok {
l.Error("Failed to write outgoing packet", "error", benchErr, "udpAddr", benchAddr)
}
}
}
func BenchmarkRateLimitedDenied(b *testing.B) {
lg, lim := benchLogger(), mustLimiter(b, 1, time.Hour)
lim.Allow()
b.ReportAllocs()
for i := 0; i < b.N; i++ {
if l, ok := RateLimited(lg, lim); ok {
l.Error("Failed to write outgoing packet", "error", benchErr, "udpAddr", benchAddr)
}
}
}
func BenchmarkRateLimitedAfterDenied(b *testing.B) {
lg, lim := benchLogger(), fakeLimiter{denied: 5, ok: true}
b.ReportAllocs()
for i := 0; i < b.N; i++ {
if l, ok := RateLimited(lg, lim); ok {
l.Error("Failed to write outgoing packet", "error", benchErr, "udpAddr", benchAddr)
}
}
}
func mustLimiter(b *testing.B, burst int, every time.Duration) *ratelimit.Limiter {
l, err := ratelimit.New(burst, every)
if err != nil {
b.Fatal(err)
}
return l
}
+7 -25
View File
@@ -12,7 +12,6 @@ import (
"strings"
"time"
"github.com/slackhq/nebula/commands"
"github.com/slackhq/nebula/config"
"github.com/slackhq/nebula/cpupick"
"github.com/slackhq/nebula/noiseutil"
@@ -72,18 +71,14 @@ func Main(c *config.C, configTest bool, buildVersion string, l *slog.Logger, dev
}
l.Info("Firewall started", "firewallHashes", fw.GetRuleHashes())
// The command registry is shared by every surface that exposes these commands, so a
// command cannot reach one of them without reaching the others.
cmdRegistry := commands.New()
ssh, err := sshd.NewSSHServer(ctx, l.With("subsystem", "sshd"), cmdRegistry)
ssh, err := sshd.NewSSHServer(ctx, l.With("subsystem", "sshd"))
if err != nil {
return nil, util.ContextualizeIfNeeded("Error while creating SSH server", err)
}
wireSSHReload(l, ssh, c)
var sshStart func()
if c.GetBool("sshd.enabled", false) {
sshStart, err = configSSH(l, ssh, c, nil)
sshStart, err = configSSH(l, ssh, c)
if err != nil {
l.Warn("Failed to configure sshd, ssh debugging will not be available", "error", err)
sshStart = nil
@@ -202,7 +197,7 @@ func Main(c *config.C, configTest bool, buildVersion string, l *slog.Logger, dev
if err != nil {
return nil, util.NewContextualError("Failed to open udp listener", m{"queue": i}, err)
}
udpServer.ReloadConfig(c, nil)
udpServer.ReloadConfig(c)
udpConns[i] = udpServer
// If port is dynamic, discover it before the next pass through the for loop
@@ -305,7 +300,6 @@ func Main(c *config.C, configTest bool, buildVersion string, l *slog.Logger, dev
}
var ifce *Interface
var emitStats func()
if !configTest {
ifce, err = NewInterface(ctx, ifConfig)
if err != nil {
@@ -316,16 +310,6 @@ func Main(c *config.C, configTest bool, buildVersion string, l *slog.Logger, dev
lightHouse.ifce = ifce
ifce.RegisterConfigChangeCallbacks(c)
// These are only read at startup
c.RegisterReloadCallback(func(c *config.C, r *config.Reload) {
r.RestartRequiredIfChanged(
"routines", "tun.routines", "listen.routines", "firewall.conntrack.routine_cache_timeout",
"listen.port", "listen.host", "stats.message_metrics",
"handshakes.try_interval", "handshakes.retries", "handshakes.trigger_buffer",
"tun.drop_local_broadcast", "tun.drop_multicast",
)
r.RestartRequiredIfChanged(osStartupOnlyKeys...)
})
ifce.reloadDisconnectInvalid(c)
ifce.reloadSendRecvError(c)
ifce.reloadAcceptRecvError(c)
@@ -334,12 +318,9 @@ func Main(c *config.C, configTest bool, buildVersion string, l *slog.Logger, dev
go handshakeManager.Run(ctx)
punchy.Start(ctx, ifce, hostMap, lightHouse)
// On the stats server's loop, so the gauges follow the interval it accepted
emitStats = ifce.statsEmitter()
}
stats, err := newStatsServerFromConfig(ctx, l, c, buildVersion, configTest, emitStats)
stats, err := newStatsServerFromConfig(ctx, l, c, buildVersion, configTest)
if err != nil {
return nil, util.ContextualizeIfNeeded("Failed to start stats emitter", err)
}
@@ -348,14 +329,15 @@ func Main(c *config.C, configTest bool, buildVersion string, l *slog.Logger, dev
return nil, nil
}
attachCommands(l, c, cmdRegistry, ifce)
go ifce.emitStats(ctx, c.GetDuration("stats.interval", time.Second*10))
attachCommands(l, c, ssh, ifce)
networkChanges := udp.NewNetworkChangeMonitor(ctx, l, c)
return &Control{
state: StateReady,
f: ifce,
commands: cmdRegistry,
l: l,
ctx: ctx,
cancel: cancel,
-6
View File
@@ -1,6 +0,0 @@
//go:build linux && !android && !e2e_testing
package nebula
// osStartupOnlyKeys are startup only keys that only matter on linux: udp batch size, udp offloads and thread pinning
var osStartupOnlyKeys = []string{"listen.batch", "listen.udp_offloads", "tun.pin_threads", "tun.pin_threads_key", "tun.cpu_affinity"}
-6
View File
@@ -1,6 +0,0 @@
//go:build !linux || android || e2e_testing
package nebula
// osStartupOnlyKeys is empty, none of the OS specific startup keys matter here
var osStartupOnlyKeys []string
+8 -13
View File
@@ -160,7 +160,9 @@ func (f *Interface) readOutsidePackets(via ViaSender, packet []byte, rxc *rxCont
case header.TestReply:
// No-op, useful for the Roaming and connectionManager side-effects above
case header.TestRequest:
if header.MaxOverhead+len(out) > len(rxc.scratch) {
const maxCipherOverhead = 16 //todo we use this too often, needs a real importable const
const maxOverhead = header.Len + header.Len + maxCipherOverhead + maxCipherOverhead
if maxOverhead+len(out) > len(rxc.scratch) {
// A reply that cannot fit in scratch is dropped no matter the log level.
if f.l.Enabled(context.Background(), slog.LevelDebug) {
hostinfo.logger(f.l).Debug("dropping oversized test request", "payloadLen", len(out), "from", via)
@@ -261,16 +263,11 @@ func (f *Interface) handleOutsideRelayPacket(hostinfo *HostInfo, via ViaSender,
// closeTunnel closes a tunnel locally, it does not send a closeTunnel packet to the remote
func (f *Interface) closeTunnel(hostInfo *HostInfo) {
// Hold the hostmap lock across both the delete and the lighthouse eviction,
// to avoid a race with handshake completion.
f.hostMap.Lock()
defer f.hostMap.Unlock()
if !f.hostMap.unlockedDeleteHostInfo(hostInfo) {
return
final := f.hostMap.DeleteHostInfo(hostInfo)
if final {
// We no longer have any tunnels with this vpn addr, clear learned lighthouse state to lower memory usage
f.lightHouse.DeleteVpnAddrs(hostInfo.vpnAddrs)
}
// We no longer have any tunnels with this vpn addr, clear learned lighthouse state to lower memory usage
f.lightHouse.DeleteVpnAddrs(hostInfo.vpnAddrs)
}
// sendCloseTunnel is a helper function to send a proper close tunnel packet to a remote
@@ -476,9 +473,7 @@ func parseV4(data []byte, incoming bool, fp *firewall.ParsedPacket) error {
func (f *Interface) handleOutsideMessagePacket(hostinfo *HostInfo, messageCounter uint64, out []byte, rxc *rxContext) {
err := newPacket(out, true, rxc.fwPacket)
if err != nil {
if f.l.Enabled(context.Background(), slog.LevelDebug) {
hostinfo.logger(f.l).Debug("Error while validating inbound packet", "error", err, "packet", out)
}
hostinfo.logger(f.l).Warn("Error while validating inbound packet", "error", err, "packet", out)
return
}
+62
View File
@@ -435,3 +435,65 @@ func testPP(pkt []byte) *firewall.ParsedPacket {
}
return pp
}
// fakeTunBatchWriter records each WriteBatch call and each plain Write separately.
type fakeTunBatchWriter struct {
writes [][]byte
batches [][][]byte
}
func (w *fakeTunBatchWriter) Write(p []byte) (int, error) {
w.writes = append(w.writes, bytes.Clone(p))
return len(p), nil
}
func (w *fakeTunBatchWriter) WriteBatch(pkts [][]byte) error {
var b [][]byte
for _, p := range pkts {
b = append(b, bytes.Clone(p))
}
w.batches = append(w.batches, b)
return nil
}
// TestPassthroughUsesWriteBatch pins that a writer implementing tio.BatchWriter gets the whole
// passthrough lane in one WriteBatch per Flush, in order, and no plain Writes; an empty Flush
// makes no call.
func TestPassthroughUsesWriteBatch(t *testing.T) {
w := &fakeTunBatchWriter{}
m := newTestMultiCoalescer(t, w)
k := &keySeq{epoch: 1}
var want [][]byte
for i := range 5 {
icmp := make([]byte, 28)
icmp[0] = 0x45
icmp[3] = 28
icmp[9] = 1
icmp[20] = byte(i)
want = append(want, icmp)
if err := m.Commit(icmp, k.next(), testPP(icmp)); err != nil {
t.Fatal(err)
}
}
if err := m.Flush(); err != nil {
t.Fatal(err)
}
if err := m.Flush(); err != nil {
t.Fatal(err)
}
if len(w.writes) != 0 {
t.Fatalf("got %d plain Writes, want 0", len(w.writes))
}
if len(w.batches) != 1 {
t.Fatalf("got %d WriteBatch calls, want 1", len(w.batches))
}
for i, p := range w.batches[0] {
if !bytes.Equal(p, want[i]) {
t.Fatalf("packet %d: got % x, want % x", i, p, want[i])
}
}
if len(w.batches[0]) != len(want) {
t.Fatalf("got %d packets, want %d", len(w.batches[0]), len(want))
}
}
+17 -6
View File
@@ -2,18 +2,23 @@ package batch
import (
"io"
"github.com/slackhq/nebula/overlay/tio"
)
// Passthrough is MultiCoalescer's verbatim lane: no batching, packets are written at Flush in the
// order enqueued.
// Passthrough is MultiCoalescer's verbatim lane: no coalescing, packets are written at Flush in the
// order enqueued, in one WriteBatch when out implements tio.BatchWriter.
type Passthrough struct {
out io.Writer
bw tio.BatchWriter // nil: Flush writes one packet per Write
slots [][]byte
}
func NewPassthrough(w io.Writer) *Passthrough {
bw, _ := w.(tio.BatchWriter)
return &Passthrough{
out: w,
bw: bw,
slots: make([][]byte, 0, 128),
}
}
@@ -26,10 +31,16 @@ func (p *Passthrough) enqueue(pkt []byte) error {
func (p *Passthrough) Flush() error {
var firstErr error
for _, s := range p.slots {
_, err := p.out.Write(s)
if err != nil && firstErr == nil {
firstErr = err
if p.bw != nil {
if len(p.slots) > 0 {
firstErr = p.bw.WriteBatch(p.slots)
}
} else {
for _, s := range p.slots {
_, err := p.out.Write(s)
if err != nil && firstErr == nil {
firstErr = err
}
}
}
clear(p.slots)
-57
View File
@@ -1,57 +0,0 @@
//go:build !e2e_testing
package overlay
import (
"fmt"
"log/slog"
"golang.org/x/sys/windows"
"golang.org/x/sys/windows/registry"
)
var tcpipInterfaceKeys = []string{
`SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces`,
`SYSTEM\CurrentControlSet\Services\Tcpip6\Parameters\Interfaces`,
}
// disableDNSRegistration prevents publishing overlay addresses in the host's
// DNS records, where clients outside the overlay cannot reach them.
// Failures are non-fatal so registry access cannot prevent tunnel creation.
func disableDNSRegistration(l *slog.Logger, guid windows.GUID) {
id := guid.String()
for _, base := range tcpipInterfaceKeys {
path := base + `\` + id
if err := setDNSRegistrationValues(path); err != nil {
l.Warn("Failed to disable DNS registration on the tun adapter", "error", err, "key", path)
continue
}
l.Debug("Disabled DNS registration on the tun adapter", "key", path)
}
}
func setDNSRegistrationValues(path string) error {
// The stack may not have created the adapter's interface key yet.
k, _, err := registry.CreateKey(registry.LOCAL_MACHINE, path, registry.SET_VALUE)
if err != nil {
return fmt.Errorf("open HKLM\\%s: %w", path, err)
}
defer k.Close()
// Neither RegistrationEnabled nor DisableDynamicUpdate alone reliably
// prevents registration, so all three settings are required.
values := []struct {
name string
data uint32
}{
{"RegistrationEnabled", 0},
{"DisableDynamicUpdate", 1},
{"MaxNumberOfAddressesToRegister", 0},
}
for _, v := range values {
if err := k.SetDWordValue(v.name, v.data); err != nil {
return fmt.Errorf("set %s: %w", v.name, err)
}
}
return nil
}
+4 -28
View File
@@ -50,13 +50,7 @@ func (r Route) String() string {
func makeRouteTree(l *slog.Logger, routes []Route, allowMTU bool) (*bart.Table[routing.Gateways], error) {
routeTree := new(bart.Table[routing.Gateways])
seen := make(map[netip.Prefix]bool, len(routes))
for _, r := range routes {
if seen[r.Cidr] {
l.Warn("route is listed more than once, only the last entry's via is used", "route", r)
}
seen[r.Cidr] = true
if !allowMTU && r.MTU > 0 {
l.Warn("route MTU is not supported on this platform",
"goos", runtime.GOOS,
@@ -104,11 +98,7 @@ func parseRoutes(c *config.C, networks []netip.Prefix) ([]Route, error) {
mtu, ok := rMtu.(int)
if !ok {
s, ok := rMtu.(string)
if !ok {
return nil, fmt.Errorf("entry %v.mtu in tun.routes is not an integer: %v", i+1, rMtu)
}
mtu, err = strconv.Atoi(s)
mtu, err = strconv.Atoi(rMtu.(string))
if err != nil {
return nil, fmt.Errorf("entry %v.mtu in tun.routes is not an integer: %v", i+1, err)
}
@@ -184,11 +174,7 @@ func parseUnsafeRoutes(c *config.C, networks []netip.Prefix) ([]Route, error) {
if rMtu, ok := m["mtu"]; ok {
mtu, ok = rMtu.(int)
if !ok {
s, ok := rMtu.(string)
if !ok {
return nil, fmt.Errorf("entry %v.mtu in tun.unsafe_routes is not an integer: %v", i+1, rMtu)
}
mtu, err = strconv.Atoi(s)
mtu, err = strconv.Atoi(rMtu.(string))
if err != nil {
return nil, fmt.Errorf("entry %v.mtu in tun.unsafe_routes is not an integer: %v", i+1, err)
}
@@ -206,15 +192,10 @@ func parseUnsafeRoutes(c *config.C, networks []netip.Prefix) ([]Route, error) {
metric, ok := rMetric.(int)
if !ok {
s, ok := rMetric.(string)
if !ok {
return nil, fmt.Errorf("entry %v.metric in tun.unsafe_routes is not an integer: %v", i+1, rMetric)
}
n, err := strconv.ParseInt(s, 10, 32)
_, err = strconv.ParseInt(rMetric.(string), 10, 32)
if err != nil {
return nil, fmt.Errorf("entry %v.metric in tun.unsafe_routes is not an integer: %v", i+1, err)
}
metric = int(n)
}
if metric < 0 || metric > math.MaxInt32 {
@@ -267,15 +248,10 @@ func parseUnsafeRoutes(c *config.C, networks []netip.Prefix) ([]Route, error) {
gatewayWeight, ok := rGatewayWeight.(int)
if !ok {
s, ok := rGatewayWeight.(string)
if !ok {
return nil, fmt.Errorf("entry .weight in tun.unsafe_routes[%v].via[%v] is not an integer", i+1, ig+1)
}
w, err := strconv.ParseInt(s, 10, 32)
_, err = strconv.ParseInt(rGatewayWeight.(string), 10, 32)
if err != nil {
return nil, fmt.Errorf("entry .weight in tun.unsafe_routes[%v].via[%v] is not an integer", i+1, ig+1)
}
gatewayWeight = int(w)
}
if gatewayWeight < 1 || gatewayWeight > math.MaxInt32 {
-116
View File
@@ -1,17 +1,13 @@
package overlay
import (
"bytes"
"fmt"
"net/netip"
"strings"
"testing"
"github.com/slackhq/nebula/config"
"github.com/slackhq/nebula/header"
"github.com/slackhq/nebula/routing"
"github.com/slackhq/nebula/test"
"github.com/slackhq/nebula/udp"
"github.com/stretchr/testify/assert"
"github.com/stretchr/testify/require"
)
@@ -406,115 +402,3 @@ func Test_makeMultipathUnsafeRouteTree(t *testing.T) {
routing.CalculateBucketsForGateways(expectedGateways)
assert.ElementsMatch(t, expectedGateways, r)
}
func Test_getMTU(t *testing.T) {
l := test.NewLogger()
c := config.NewC(l)
// unset
assert.Equal(t, DefaultMTU, getMTU(l, c))
// the largest a relayed packet can carry in one underlay buffer
require.Equal(t, udp.MTU, MaxMTU+header.MaxOverhead)
c.Settings["tun"] = map[string]any{"mtu": MaxMTU}
assert.Equal(t, MaxMTU, getMTU(l, c))
// too big is capped
c.Settings["tun"] = map[string]any{"mtu": 9000}
assert.Equal(t, MaxMTU, getMTU(l, c))
}
func Test_getAllRoutesFromConfigCapsMTU(t *testing.T) {
l := test.NewLogger()
c := config.NewC(l)
c.Settings["tun"] = map[string]any{
"routes": []any{
map[string]any{"mtu": "9000", "route": "10.0.0.0/29"},
map[string]any{"mtu": "1300", "route": "10.0.0.8/29"},
},
"unsafe_routes": []any{
map[string]any{"via": "127.0.0.1", "mtu": "9000", "route": "1.0.0.0/29"},
},
}
changed, routes, err := getAllRoutesFromConfig(l, c, []netip.Prefix{netip.MustParsePrefix("10.0.0.0/24")}, true)
require.NoError(t, err)
assert.True(t, changed)
mtus := map[string]int{}
for _, r := range routes {
mtus[r.Cidr.String()] = r.MTU
}
assert.Equal(t, map[string]int{"10.0.0.0/29": MaxMTU, "10.0.0.8/29": 1300, "1.0.0.0/29": MaxMTU}, mtus)
}
// The route tree keeps one entry per CIDR, so a CIDR listed twice only routes by the last one. Say so instead of
// letting the earlier via, or on Windows the earlier metric, quietly lose
func Test_makeRouteTree_WarnsOnDuplicate(t *testing.T) {
buf := &bytes.Buffer{}
l := test.NewLoggerWithOutput(buf)
via := func(s string) routing.Gateways {
return routing.Gateways{routing.NewGateway(netip.MustParseAddr(s), 1)}
}
cidr := netip.MustParsePrefix("10.251.1.0/24")
_, err := makeRouteTree(l, []Route{
{Cidr: cidr, Via: via("10.250.0.2"), Install: true, Metric: 100},
{Cidr: netip.MustParsePrefix("10.251.2.0/24"), Via: via("10.250.0.2"), Install: true},
}, false)
require.NoError(t, err)
assert.Empty(t, buf.String())
tree, err := makeRouteTree(l, []Route{
{Cidr: cidr, Via: via("10.250.0.2"), Install: true, Metric: 100},
{Cidr: cidr, Via: via("10.250.0.3"), Install: true, Metric: 200},
}, false)
require.NoError(t, err)
assert.Equal(t, 1, strings.Count(buf.String(), "route is listed more than once, only the last entry's via is used"))
gw, ok := tree.Lookup(netip.MustParseAddr("10.251.1.1"))
require.True(t, ok)
assert.Equal(t, netip.MustParseAddr("10.250.0.3"), gw[0].Addr(), "the last entry wins")
}
// A quoted metric or weight is a number written as a string, it means that number. Anything else is an error, not a
// panic
func Test_parseUnsafeRoutes_QuotedNumbers(t *testing.T) {
c := config.NewC(test.NewLogger())
n := netip.MustParsePrefix("10.0.0.1/24")
route := func(metric, weight any) {
c.Settings["tun"] = map[string]any{"unsafe_routes": []any{map[string]any{
"route": "1.0.0.0/8",
"metric": metric,
"via": []any{map[string]any{"gateway": "10.0.0.2", "weight": weight}},
}}}
}
route("100", "5")
routes, err := parseUnsafeRoutes(c, []netip.Prefix{n})
require.NoError(t, err)
require.Len(t, routes, 1)
assert.Equal(t, 100, routes[0].Metric)
assert.Equal(t, "{addr: 10.0.0.2, weight: 5}", routes[0].Via[0].String())
route(1.5, 1)
_, err = parseUnsafeRoutes(c, []netip.Prefix{n})
require.EqualError(t, err, "entry 1.metric in tun.unsafe_routes is not an integer: 1.5")
route(1, true)
_, err = parseUnsafeRoutes(c, []netip.Prefix{n})
require.EqualError(t, err, "entry .weight in tun.unsafe_routes[1].via[1] is not an integer")
}
// An mtu that is neither a number nor a quoted one is an error, not a panic
func Test_parseRoutes_MTUNotANumber(t *testing.T) {
c := config.NewC(test.NewLogger())
n := netip.MustParsePrefix("10.0.0.1/24")
c.Settings["tun"] = map[string]any{"routes": []any{map[string]any{"route": "1.0.0.0/8", "mtu": 1500.5}}}
_, err := parseRoutes(c, []netip.Prefix{n})
require.EqualError(t, err, "entry 1.mtu in tun.routes is not an integer: 1500.5")
c.Settings["tun"] = map[string]any{"unsafe_routes": []any{map[string]any{"route": "1.0.0.0/8", "via": "10.0.0.2", "mtu": 1500.5}}}
_, err = parseUnsafeRoutes(c, []netip.Prefix{n})
require.EqualError(t, err, "entry 1.mtu in tun.unsafe_routes is not an integer: 1500.5")
}
+11
View File
@@ -145,3 +145,14 @@ func SupportsGSO(w io.Writer, want GSOProto) (GSOWriter, bool) {
return gw, false
}
}
// BatchWriter is implemented by Queues that can emit several already-segmented packets in one call.
// Backends without a batched write do not implement it and callers loop over Write.
//
// pkts are borrowed: WriteBatch must not retain them past its return.
// A returned error doesn't say which packets were delivered, so callers must not retry the batch.
// Safe for concurrent use, like Write.
type BatchWriter interface {
io.Writer
WriteBatch(pkts [][]byte) error
}
+328
View File
@@ -0,0 +1,328 @@
//go:build darwin && !ios
package tio
import (
"fmt"
"log/slog"
"os"
"sync"
"sync/atomic"
"syscall"
_ "unsafe" // for go:linkname
"github.com/slackhq/nebula/internal/msgx"
"golang.org/x/sys/unix"
)
// tunMaxPacket is the largest packet utun can return at any device MTU.
const tunMaxPacket = 65535
// tunReadBatch is the most packets one Utun.Read returns.
const tunReadBatch = 64
// tunReadArena is Utun's receive buffer. Draining stops once less than tunMaxPacket of it is left,
// so every readv has room for the largest packet utun can return.
const tunReadArena = 4 * tunMaxPacket
// tunWriteBatch is how many packets one sendmsg_x call may carry.
const tunWriteBatch = 64
// Utun is a darwin utun control socket as a Queue. Every packet crosses the socket behind a 4 byte
// address family prefix, which Read strips and the writes add.
//
// The fd lives in the runtime poller, so Close wakes a Read parked on it; darwin needs no QueueSet
// shutdown fd.
type Utun struct {
f *os.File
l *slog.Logger
// readBuf and readRet are Read's scratch, owned by the single reader.
readBuf []byte
readRet [tunReadBatch]Packet
// noSendmsgX is set when libSystem lacks sendmsg_x or the kernel refuses it; WriteBatch then writes one packet at a time.
noSendmsgX atomic.Bool
batchMu sync.Mutex
batch tunBatch
}
// tunBatch is WriteBatch's scratch, guarded by Utun.batchMu. The kernel reads every entry in place.
type tunBatch struct {
heads [tunWriteBatch][4]byte
iovs [tunWriteBatch][2]unix.Iovec
hdrs [tunWriteBatch]msgx.Hdr
pkts [tunWriteBatch][]byte
}
// NewUtun wraps a utun control socket fd and makes it non-blocking.
// On failure it does NOT close fd: the caller owns fd until NewUtun succeeds, after which Close closes it.
func NewUtun(fd int, l *slog.Logger) (*Utun, error) {
// Before os.NewFile, which only hands a non-blocking fd to the runtime poller.
if err := unix.SetNonblock(fd, true); err != nil {
return nil, fmt.Errorf("failed to set the tun fd to non-blocking mode: %w", err)
}
u := &Utun{
f: os.NewFile(uintptr(fd), "utun"),
l: l,
readBuf: make([]byte, tunReadArena),
}
u.noSendmsgX.Store(!msgx.Available())
return u, nil
}
// tunWritev and tunReadv are linkname'd to x/sys/unix's libc-routed writev/readv stubs so the
// calls go through libSystem's pinned trampoline. A raw syscall.Syscall(SYS_WRITEV/SYS_READV, ...)
// on darwin/arm64 emits an SVC #0x80 trap (see $GOROOT/src/syscall/asm_darwin_arm64.s), the path
// Apple keeps warning they will eventually disallow. We pull the low-level stubs instead of calling
// unix.Writev/unix.Readv because those take [][]byte and rebuild the []Iovec every call, which
// heap-allocates the header; linkname'ing the stubs lets us hand them our own stack-allocated
// iovecs. See golang/go#78049.
//go:linkname tunWritev golang.org/x/sys/unix.writev
//go:noescape
func tunWritev(fd int, iovecs []unix.Iovec) (n int, err error)
//go:linkname tunReadv golang.org/x/sys/unix.readv
//go:noescape
func tunReadv(fd int, iovecs []unix.Iovec) (n int, err error)
// Read waits for the utun to become readable, then reads packets until it would block, up to
// tunReadBatch, so the caller encrypts and sends them as one batch rather than one per wakeup. Each
// packet is read with its AF prefix scattered away, so the payload lands directly in readBuf.
// An error after at least one packet is dropped in favor of returning those packets; a persistent
// one recurs on the next Read.
func (u *Utun) Read() ([]Packet, error) {
rc, err := u.f.SyscallConn()
if err != nil {
return nil, err
}
var head [4]byte
n, off := 0, 0
var callErr error
err = rc.Read(func(fd uintptr) bool {
for n < tunReadBatch && len(u.readBuf)-off >= tunMaxPacket {
iovecs := [2]unix.Iovec{
{Base: &head[0], Len: 4},
{Base: &u.readBuf[off], Len: uint64(len(u.readBuf) - off)},
}
l, e := tunReadv(int(fd), iovecs[:])
if e != nil {
if errno, ok := e.(syscall.Errno); ok && errno.Temporary() {
// Park on the poller only while there is nothing to hand back.
return n > 0
}
callErr = e
return true
}
if l < 4 {
// A datagram too short to carry the AF prefix, or end of file; stop rather than spin on it.
return true
}
end := off + l - 4
u.readRet[n] = Packet{Bytes: u.readBuf[off:end:end]}
n++
off = end
}
return true
})
if n > 0 {
return u.readRet[:n], nil
}
if err != nil {
return nil, err
}
return nil, callErr
}
// Write pushes one IP packet onto the utun device. Safe for concurrent use:
// the AF prefix and iovecs are per-call stack state, and the fd write itself
// serializes on the runtime's fd mutex (see the Queue contract in tio.go).
func (u *Utun) Write(from []byte) (int, error) {
if len(from) == 0 {
return 0, syscall.EIO
}
var head [4]byte
af, err := tunAF(from)
if err != nil {
return 0, err
}
head[3] = af
// Grab rc as a local so the compiler can devirtualize the call and keep the closure on the stack.
rc, err := u.f.SyscallConn()
if err != nil {
return 0, err
}
var n int
var callErr error
err = rc.Write(func(fd uintptr) bool {
iovecs := []unix.Iovec{
{Base: &head[0], Len: 4},
{Base: &from[0], Len: uint64(len(from))},
}
n, callErr = tunWritev(int(fd), iovecs)
// Type-assert to syscall.Errno so the EAGAIN/EWOULDBLOCK/EINTR check doesn't box the errno
// constants into error interfaces on every call.
if errno, ok := callErr.(syscall.Errno); ok && errno.Temporary() {
return false
}
return true
})
if err != nil {
return 0, err
}
if callErr != nil {
return 0, callErr
}
return n - 4, nil
}
// tunAF returns the utun address-family prefix byte for an IP packet.
func tunAF(pkt []byte) (byte, error) {
switch pkt[0] >> 4 {
case 4:
return syscall.AF_INET, nil
case 6:
return syscall.AF_INET6, nil
default:
return 0, fmt.Errorf("unable to determine IP version from packet")
}
}
// WriteBatch writes pkts to the utun device with sendmsg_x, xnu's private batched sendmsg, up to
// tunWriteBatch packets per syscall. The kernel still hands each packet to utun on its own, so this
// saves syscalls, not per-packet kernel work. Safe for concurrent use.
//
// An empty packet or one with no IP version is skipped and reported, as Write would. Any other
// error from sendmsg_x means the kernel took an unknown prefix of that call and dropped the rest, so
// it is reported rather than retried, which could deliver packets twice.
//
// Under mbuf exhaustion, sendmsg_x silently drops packets that writev would have delivered: the
// kernel counts each packet as sent once it is copied in, and when a later allocation fails it
// frees that prefix unsent and returns its length as a short count, which is indistinguishable
// from a real one.
func (u *Utun) WriteBatch(pkts [][]byte) error {
if u.noSendmsgX.Load() {
return u.writeEach(pkts)
}
u.batchMu.Lock()
defer u.batchMu.Unlock()
b := &u.batch
var firstErr error
for len(pkts) > 0 {
n := 0
for len(pkts) > 0 && n < tunWriteBatch {
p := pkts[0]
pkts = pkts[1:]
var af byte
err := error(syscall.EIO)
if len(p) > 0 {
af, err = tunAF(p)
}
if err != nil {
if firstErr == nil {
firstErr = err
}
continue
}
b.heads[n] = [4]byte{3: af}
b.iovs[n] = [2]unix.Iovec{
{Base: &b.heads[n][0], Len: 4},
{Base: &p[0], Len: uint64(len(p))},
}
b.hdrs[n] = msgx.Hdr{Iov: &b.iovs[n][0], Iovlen: 2}
b.pkts[n] = p
n++
}
if n == 0 {
continue
}
for off := 0; off < n; {
sent, err := u.sendmsgX(off, n)
switch {
case err == nil && sent > 0:
// The kernel stops early without an error on a packet larger than the socket's send
// buffer, or when sending a later packet fails with ENOBUFS; resend the remainder.
off += sent
case err == nil:
if werr := u.writeEach(b.pkts[off:n]); werr != nil && firstErr == nil {
firstErr = werr
}
off = n
case err == unix.EMSGSIZE:
// Only the first packet being larger than the socket's send buffer fails the whole call,
// before the kernel takes any; Write reports that one and the rest go out in the next call.
if werr := u.writeEach(b.pkts[off : off+1]); werr != nil && firstErr == nil {
firstErr = werr
}
off++
case err == unix.ENOSYS || err == unix.EPERM || err == unix.EOPNOTSUPP:
// sendmsg_x is private API: fall back to writev if a kernel or sandbox refuses it.
if u.noSendmsgX.CompareAndSwap(false, true) {
u.l.Warn("sendmsg_x unavailable on the tun device, writing one packet per syscall", "error", err)
}
if werr := u.writeEach(b.pkts[off:n]); werr != nil && firstErr == nil {
firstErr = werr
}
clear(b.iovs[:n])
clear(b.pkts[:n])
if werr := u.writeEach(pkts); werr != nil && firstErr == nil {
firstErr = werr
}
return firstErr
default:
if firstErr == nil {
firstErr = err
}
off = n
}
}
clear(b.iovs[:n])
clear(b.pkts[:n])
}
return firstErr
}
// sendmsgX hands entries off through n-1 of u.batch to sendmsg_x and returns how many the kernel took.
func (u *Utun) sendmsgX(off, n int) (int, error) {
rc, err := u.f.SyscallConn()
if err != nil {
return 0, err
}
var sent int
var errno syscall.Errno
err = rc.Write(func(fd uintptr) bool {
sent, errno = msgx.Send(fd, u.batch.hdrs[off:n], 0)
// sendmsg_x reports EAGAIN only when it took nothing; a partial batch returns its count.
return !errno.Temporary()
})
if err != nil {
return 0, err
}
if errno != 0 {
return 0, errno
}
return sent, nil
}
// writeEach writes pkts one at a time with Write.
func (u *Utun) writeEach(pkts [][]byte) error {
var firstErr error
for _, p := range pkts {
if _, err := u.Write(p); err != nil && firstErr == nil {
firstErr = err
}
}
return firstErr
}
func (u *Utun) Close() error {
return u.f.Close()
}
+198
View File
@@ -0,0 +1,198 @@
//go:build darwin && !ios
package tio
import (
"bytes"
"log/slog"
"syscall"
"testing"
"github.com/stretchr/testify/assert"
"github.com/stretchr/testify/require"
"golang.org/x/sys/unix"
)
// newSocketpairUtun returns a Utun over one end of a connected AF_UNIX datagram socketpair, which
// takes sendmsg_x the way a utun control socket does, and the other end's fd for the test to use.
// sndbuf is the Utun's send buffer, which caps the largest datagram it accepts.
func newSocketpairUtun(t *testing.T, sndbuf int) (*Utun, int) {
t.Helper()
fds, err := unix.Socketpair(unix.AF_UNIX, unix.SOCK_DGRAM, 0)
require.NoError(t, err)
require.NoError(t, unix.SetsockoptInt(fds[0], unix.SOL_SOCKET, unix.SO_SNDBUF, sndbuf))
// An AF_UNIX datagram send is bounded by the receiver's buffer, so size both ends' for the tests.
require.NoError(t, unix.SetsockoptInt(fds[0], unix.SOL_SOCKET, unix.SO_RCVBUF, 1<<20))
require.NoError(t, unix.SetsockoptInt(fds[1], unix.SOL_SOCKET, unix.SO_RCVBUF, 1<<20))
// A dropped datagram fails the read-back instead of hanging it.
require.NoError(t, unix.SetsockoptTimeval(fds[1], unix.SOL_SOCKET, unix.SO_RCVTIMEO, &unix.Timeval{Sec: 2}))
u, err := NewUtun(fds[0], slog.New(slog.DiscardHandler))
if err != nil {
_ = unix.Close(fds[0])
_ = unix.Close(fds[1])
t.Fatal(err)
}
t.Cleanup(func() {
_ = u.Close()
_ = unix.Close(fds[1])
})
return u, fds[1]
}
// testTunPkt returns packet i of size bytes, alternating IPv4 and IPv6, and the datagram the utun
// device should receive for it.
func testTunPkt(i, size int) (pkt, wire []byte) {
pkt = make([]byte, size)
pkt[0] = 0x45
af := byte(syscall.AF_INET)
if i%2 == 1 {
pkt[0] = 0x60
af = syscall.AF_INET6
}
pkt[1] = byte(i)
pkt[2] = byte(i >> 8)
return pkt, append([]byte{0, 0, 0, af}, pkt...)
}
// readTunBack asserts r receives exactly want, in order.
func readTunBack(t *testing.T, r int, want [][]byte) {
t.Helper()
buf := make([]byte, 4096)
for i, w := range want {
n, _, err := unix.Recvfrom(r, buf, 0)
require.NoError(t, err, "datagram %d", i)
if !bytes.Equal(w, buf[:n]) {
t.Fatalf("datagram %d: got % x, want % x", i, buf[:n], w)
}
}
_, _, err := unix.Recvfrom(r, buf, unix.MSG_DONTWAIT)
assert.ErrorIs(t, err, unix.EAGAIN, "extra datagrams delivered")
}
// forEachTunWritePath runs fn once over sendmsg_x and once over the per-packet writev fallback.
func forEachTunWritePath(t *testing.T, fn func(t *testing.T, fallback bool)) {
for _, fallback := range []bool{false, true} {
name := "sendmsg_x"
if fallback {
name = "writev"
}
t.Run(name, func(t *testing.T) { fn(t, fallback) })
}
}
// TestUtunWriteBatch pins that WriteBatch delivers every packet whole, in order and behind the right
// utun AF prefix, across several sendmsg_x calls, and returns nil.
func TestUtunWriteBatch(t *testing.T) {
forEachTunWritePath(t, func(t *testing.T, fallback bool) {
u, r := newSocketpairUtun(t, 1<<20)
u.noSendmsgX.Store(fallback)
var pkts, want [][]byte
for i := range 3*tunWriteBatch + 5 {
p, w := testTunPkt(i, 60+i)
pkts = append(pkts, p)
want = append(want, w)
}
require.NoError(t, u.WriteBatch(pkts))
assert.Equal(t, fallback, u.noSendmsgX.Load())
readTunBack(t, r, want)
})
}
// TestUtunWriteBatchSkipsInvalid pins that an empty packet or one with no IP version is skipped
// without shifting the packets after it, and that the first such error is the one reported.
func TestUtunWriteBatchSkipsInvalid(t *testing.T) {
forEachTunWritePath(t, func(t *testing.T, fallback bool) {
u, r := newSocketpairUtun(t, 1<<20)
u.noSendmsgX.Store(fallback)
var pkts, want [][]byte
for i := range 20 {
p, w := testTunPkt(i, 60)
pkts = append(pkts, p)
want = append(want, w)
}
pkts = append(pkts[:10], append([][]byte{{0x10, 1, 2}, {}}, pkts[10:]...)...)
err := u.WriteBatch(pkts)
assert.ErrorContains(t, err, "IP version")
readTunBack(t, r, want)
})
}
// TestUtunWriteBatchOversize pins that a packet larger than the socket's send buffer drops only
// itself and is reported, whether sendmsg_x reaches it mid-call (a short count) or first (EMSGSIZE
// for the whole call). The send buffer is 1024 bytes and the oversize packet 2000.
func TestUtunWriteBatchOversize(t *testing.T) {
for _, tc := range []struct {
name string
at int
}{
{"mid-call", tunWriteBatch + 6},
{"first-in-call", tunWriteBatch},
} {
t.Run(tc.name, func(t *testing.T) {
forEachTunWritePath(t, func(t *testing.T, fallback bool) {
u, r := newSocketpairUtun(t, 1024)
u.noSendmsgX.Store(fallback)
var pkts, want [][]byte
for i := range 2*tunWriteBatch + 10 {
size := 100
if i == tc.at {
size = 2000
}
p, w := testTunPkt(i, size)
pkts = append(pkts, p)
if i != tc.at {
want = append(want, w)
}
}
err := u.WriteBatch(pkts)
assert.ErrorIs(t, err, unix.EMSGSIZE)
assert.Equal(t, fallback, u.noSendmsgX.Load())
readTunBack(t, r, want)
})
})
}
}
// TestUtunReadDrains pins that Read hands back every queued packet, AF prefix stripped and in
// order, capped at tunReadBatch per call, and doesn't wait for more once the queue is empty.
func TestUtunReadDrains(t *testing.T) {
u, w := newSocketpairUtun(t, 1<<20)
total := tunReadBatch + 3
var want [][]byte
for i := range total {
pkt, wire := testTunPkt(i, 60+i)
_, err := unix.Write(w, wire)
require.NoError(t, err)
want = append(want, pkt)
}
var got [][]byte
for _, size := range []int{tunReadBatch, 3} {
pkts, err := u.Read()
require.NoError(t, err)
require.Len(t, pkts, size)
for _, p := range pkts {
got = append(got, p.Clone().Bytes)
}
}
assert.Equal(t, want, got)
}
// TestUtunReadClipsPackets pins that each returned packet's capacity ends at its own bytes, so
// appending to one can't overwrite the next.
func TestUtunReadClipsPackets(t *testing.T) {
u, w := newSocketpairUtun(t, 1<<20)
for i := range 2 {
_, wire := testTunPkt(i, 100)
_, err := unix.Write(w, wire)
require.NoError(t, err)
}
pkts, err := u.Read()
require.NoError(t, err)
require.Len(t, pkts, 2)
assert.Equal(t, len(pkts[0].Bytes), cap(pkts[0].Bytes))
}
+2 -31
View File
@@ -7,27 +7,11 @@ import (
"net/netip"
"github.com/slackhq/nebula/config"
"github.com/slackhq/nebula/header"
"github.com/slackhq/nebula/udp"
"github.com/slackhq/nebula/util"
)
const DefaultMTU = 1300
// MaxMTU is the largest tun.mtu, or route mtu, the underlay can carry.
// Every underlay buffer is udp.MTU bytes, and a relayed packet adds header.MaxOverhead to its plaintext.
const MaxMTU = udp.MTU - header.MaxOverhead
// getMTU reads tun.mtu, capping a value too big for the underlay to carry.
func getMTU(l *slog.Logger, c *config.C) int {
mtu := c.GetInt("tun.mtu", DefaultMTU)
if mtu > MaxMTU {
l.Warn("tun.mtu is too big for the underlay to carry, capping it", "mtu", mtu, "maxMTU", MaxMTU)
return MaxMTU
}
return mtu
}
type NameError struct {
Name string
Underlying error
@@ -41,16 +25,9 @@ func (e *NameError) Error() string {
type DeviceFactory func(c *config.C, l *slog.Logger, vpnNetworks []netip.Prefix, routines int) (Device, error)
func NewDeviceFromConfig(c *config.C, l *slog.Logger, vpnNetworks []netip.Prefix, routines int) (Device, error) {
c.RegisterReloadCallback(func(c *config.C, r *config.Reload) {
r.RestartRequiredIfChanged("tun.disabled")
})
switch {
case c.GetBool("tun.disabled", false):
tun := newDisabledTun(vpnNetworks, c.GetInt("tun.tx_queue", 5000), c.GetBool("stats.message_metrics", false), l)
c.RegisterReloadCallback(func(c *config.C, r *config.Reload) {
r.RestartRequiredIfChanged("tun.tx_queue", "stats.message_metrics")
})
tun := newDisabledTun(vpnNetworks, c.GetInt("tun.tx_queue", 500), c.GetBool("stats.message_metrics", false), l)
return tun, nil
default:
@@ -64,7 +41,7 @@ func NewFdDeviceFromConfig(fd *int) DeviceFactory {
}
}
func getAllRoutesFromConfig(l *slog.Logger, c *config.C, vpnNetworks []netip.Prefix, initial bool) (bool, []Route, error) {
func getAllRoutesFromConfig(c *config.C, vpnNetworks []netip.Prefix, initial bool) (bool, []Route, error) {
if !initial && !c.HasChanged("tun.routes") && !c.HasChanged("tun.unsafe_routes") {
return false, nil, nil
}
@@ -80,12 +57,6 @@ func getAllRoutesFromConfig(l *slog.Logger, c *config.C, vpnNetworks []netip.Pre
}
routes = append(routes, unsafeRoutes...)
for i, r := range routes {
if r.MTU > MaxMTU {
l.Warn("route mtu is too big for the underlay to carry, capping it", "route", r.Cidr, "mtu", r.MTU, "maxMTU", MaxMTU)
routes[i].MTU = MaxMTU
}
}
return true, routes, nil
}
+5 -6
View File
@@ -38,17 +38,16 @@ func newTunFromFd(c *config.C, l *slog.Logger, deviceFd int, vpnNetworks []netip
l: l,
}
err := t.reload(c, true, nil)
err := t.reload(c, true)
if err != nil {
_ = file.Close()
return nil, err
}
c.RegisterReloadCallback(func(c *config.C, r *config.Reload) {
err := t.reload(c, false, r)
c.RegisterReloadCallback(func(c *config.C) {
err := t.reload(c, false)
if err != nil {
util.LogWithContextIfNeeded("failed to reload tun device", err, t.l)
r.Failed()
}
})
@@ -68,8 +67,8 @@ func (t *tun) Activate() error {
return nil
}
func (t *tun) reload(c *config.C, initial bool, r *config.Reload) error {
change, routes, err := getAllRoutesFromConfig(t.l, c, t.vpnNetworks, initial)
func (t *tun) reload(c *config.C, initial bool) error {
change, routes, err := getAllRoutesFromConfig(c, t.vpnNetworks, initial)
if err != nil {
return err
}
-45
View File
@@ -1,45 +0,0 @@
//go:build (openbsd || netbsd) && !e2e_testing
package overlay
import (
"errors"
"fmt"
"log/slog"
"os"
"regexp"
"runtime"
"golang.org/x/sys/unix"
)
var deviceNameRE = regexp.MustCompile(`^tun[0-9]+$`)
// tunDevNeedsRestart is true when tun.dev asks for a particular tun that isn't the running one. Anything else takes the
// first free one, and the one we have will do
func tunDevNeedsRestart(name, running string) bool {
return deviceNameRE.MatchString(name) && name != running
}
// openTun opens /dev/name, or the first /dev/tunN nothing else has open when name is empty or not tunN
func openTun(l *slog.Logger, name string) (int, string, error) {
if name != "" && !deviceNameRE.MatchString(name) {
// The name doesn't mean anything here, so like darwin a bad one isn't worth refusing to start over
l.Warn("interface name must be tun[0-9]+ on "+runtime.GOOS+", ignoring", "name", name)
name = ""
}
if name != "" {
fd, err := unix.Open("/dev/"+name, os.O_RDWR, 0)
return fd, name, err
}
for i := 0; ; i++ {
name = fmt.Sprintf("tun%d", i)
fd, err := unix.Open("/dev/"+name, os.O_RDWR, 0)
if err == nil {
return fd, name, nil
}
if !errors.Is(err, unix.EBUSY) {
return -1, "", fmt.Errorf("no free tun device, %s: %w", name, err)
}
}
}
-80
View File
@@ -1,80 +0,0 @@
//go:build (openbsd || netbsd) && !e2e_testing
package overlay
import (
"net/netip"
"testing"
"github.com/slackhq/nebula/config"
"github.com/slackhq/nebula/test"
"github.com/stretchr/testify/assert"
"github.com/stretchr/testify/require"
)
// A tun.dev that isn't tunN is ignored like darwin does, and the first free tun is used. Only naming a different tun
// asks for a restart
func TestTunReloadDevRestart(t *testing.T) {
newWithDev := func(dev string) (*config.C, *tun, error) {
c := config.NewC(test.NewLogger())
require.NoError(t, c.LoadString("tun:\n dev: "+dev+"\n"))
tn, err := newTun(c, test.NewLogger(), []netip.Prefix{netip.MustParsePrefix("10.1.0.2/24")}, false)
if err == nil {
t.Cleanup(func() { _ = tn.Close() })
}
return c, tn, err
}
if _, _, err := newWithDev(""); err != nil {
t.Skipf("can't create a tun device here: %v", err)
}
c, tn, err := newWithDev("nope")
require.NoError(t, err, "a bad name should fall back to a free tun")
require.Regexp(t, `^tun[0-9]+$`, tn.Device)
for _, dev := range []string{"nope", "", tn.Device, "nope"} {
res := c.ReloadConfigString("tun:\n dev: " + dev + "\n")
require.NoError(t, res.Err)
assert.False(t, res.Failed, dev)
assert.False(t, res.RestartRequired, dev)
}
other := "tun0"
if tn.Device == other {
other = "tun1"
}
res := c.ReloadConfigString("tun:\n dev: " + other + "\n")
require.NoError(t, res.Err)
assert.Equal(t, []string{"tun.dev"}, res.RestartKeys)
}
// An empty tun.dev takes the first tun nothing else has open. Reloading it empty, or naming the one we have, needs
// no restart
func TestTunEmptyDevPicksAFreeOne(t *testing.T) {
newEmpty := func() (*config.C, *tun, error) {
c := config.NewC(test.NewLogger())
require.NoError(t, c.LoadString("tun: {}\n"))
tn, err := newTun(c, test.NewLogger(), []netip.Prefix{netip.MustParsePrefix("10.1.0.2/24")}, false)
if err == nil {
t.Cleanup(func() { _ = tn.Close() })
}
return c, tn, err
}
c, first, err := newEmpty()
if err != nil {
t.Skipf("can't create a tun device here: %v", err)
}
_, second, err := newEmpty()
require.NoError(t, err, "the second tun should skip the one the first has open")
assert.NotEqual(t, first.Device, second.Device)
for _, cfg := range []string{
"tun: {}\npunchy:\n punch: true\n",
"tun:\n dev: " + first.Device + "\n",
"tun: {}\n",
} {
res := c.ReloadConfigString(cfg)
require.NoError(t, res.Err)
assert.False(t, res.Failed)
assert.False(t, res.RestartRequired, cfg)
}
}
-3
View File
@@ -10,9 +10,6 @@ import (
"github.com/slackhq/nebula/wfp"
)
// interfaceBypassKeys are only read when the interface bypass is installed
var interfaceBypassKeys = []string{"tun.windows_bypass_wdf"}
// installInterfaceBypass installs a WFP PERMIT filter scoped to the wintun interface LUID so inbound traffic on the
// nebula adapter bypasses Windows Defender Firewall.
func installInterfaceBypass(l *slog.Logger, luid uint64) closer {
-3
View File
@@ -4,9 +4,6 @@ package overlay
import "log/slog"
// interfaceBypassKeys is empty, windows-386 has no bypass
var interfaceBypassKeys []string
// installInterfaceBypass is a no-op on windows-386 because we don't currently build for it.
func installInterfaceBypass(_ *slog.Logger, _ uint64) closer {
return nil
+62 -276
View File
@@ -6,12 +6,8 @@ import (
"errors"
"fmt"
"log/slog"
"math/bits"
"net/netip"
"os"
"sync"
"sync/atomic"
"syscall"
"unsafe"
"github.com/gaissmai/bart"
@@ -24,13 +20,13 @@ import (
)
type tun struct {
f *os.File
queue *tio.Utun
Device string
vpnNetworks []netip.Prefix
DefaultMTU int
Routes atomic.Pointer[[]Route]
routeTree atomic.Pointer[bart.Table[routing.Gateways]]
linkAddr atomic.Pointer[netroute.LinkAddr]
linkAddr *netroute.LinkAddr
// hostOwned means the fd arrived from the OS, which has already configured addressing, mtu
// and routes for it. NEPacketTunnelProvider on darwin does this.
hostOwned bool
@@ -80,31 +76,17 @@ type ifreqAlias6 struct {
Lifetime addrLifetime
}
// utunIndex is the utun tun.dev asks for, or -1 for whichever is free. ok is false for a name that isn't utunN, which
// also gets whichever is free
func utunIndex(name string) (index int, ok bool) {
if name == "" || name == "utun" {
return -1, true
}
if _, err := fmt.Sscanf(name, "utun%d", &index); err != nil || index < 0 {
return -1, false
}
return index, true
}
// tunDevNeedsRestart is true when tun.dev asks for a particular utun that isn't the running one. Anything else takes
// whichever is free, and the one we have will do
func tunDevNeedsRestart(name, running string) bool {
index, _ := utunIndex(name)
return index >= 0 && fmt.Sprintf("utun%d", index) != running
}
func newTun(c *config.C, l *slog.Logger, vpnNetworks []netip.Prefix, _ bool) (*tun, error) {
ifIndex, ok := utunIndex(c.GetString("tun.dev", ""))
if !ok {
// NOTE: we don't make this error so we don't break existing
// configs that set a name before it was used.
l.Warn("interface name must be utun[0-9]+ on Darwin, ignoring")
name := c.GetString("tun.dev", "")
ifIndex := -1
if name != "" && name != "utun" {
_, err := fmt.Sscanf(name, "utun%d", &ifIndex)
if err != nil || ifIndex < 0 {
// NOTE: we don't make this error so we don't break existing
// configs that set a name before it was used.
l.Warn("interface name must be utun[0-9]+ on Darwin, ignoring")
ifIndex = -1
}
}
fd, err := unix.Socket(unix.AF_SYSTEM, unix.SOCK_DGRAM, unix.AF_SYS_CONTROL)
@@ -128,38 +110,33 @@ func newTun(c *config.C, l *slog.Logger, vpnNetworks []netip.Prefix, _ bool) (*t
return nil, fmt.Errorf("SYS_CONNECT: %v", err)
}
name, err := unix.GetsockoptString(fd, unix.AF_SYS_CONTROL, _UTUN_OPT_IFNAME)
name, err = unix.GetsockoptString(fd, unix.AF_SYS_CONTROL, _UTUN_OPT_IFNAME)
if err != nil {
return nil, fmt.Errorf("failed to retrieve tun name: %w", err)
}
err = unix.SetNonblock(fd, true)
if err != nil {
return nil, fmt.Errorf("SetNonblock: %v", err)
}
t := &tun{
f: os.NewFile(uintptr(fd), ""),
Device: name,
vpnNetworks: vpnNetworks,
DefaultMTU: getMTU(l, c),
l: l,
}
err = t.reload(c, true, nil)
queue, err := tio.NewUtun(fd, l)
if err != nil {
return nil, err
}
c.RegisterReloadCallback(func(c *config.C, r *config.Reload) {
r.RestartRequiredIfChanged("tun.mtu")
if tunDevNeedsRestart(c.GetString("tun.dev", ""), t.Device) {
r.RestartRequiredIfChanged("tun.dev")
}
err := t.reload(c, false, r)
t := &tun{
queue: queue,
Device: name,
vpnNetworks: vpnNetworks,
DefaultMTU: c.GetInt("tun.mtu", DefaultMTU),
l: l,
}
err = t.reload(c, true)
if err != nil {
return nil, err
}
c.RegisterReloadCallback(func(c *config.C) {
err := t.reload(c, false)
if err != nil {
util.LogWithContextIfNeeded("failed to reload tun device", err, t.l)
r.Failed()
}
})
@@ -177,31 +154,30 @@ func (t *tun) deviceBytes() (o [16]byte) {
// network extension is handed its device. Everything about moving packets is shared with newTun,
// only the setup differs: the host owns addressing and routing here.
func newTunFromFd(c *config.C, l *slog.Logger, deviceFd int, vpnNetworks []netip.Prefix) (*tun, error) {
if err := unix.SetNonblock(deviceFd, true); err != nil {
queue, err := tio.NewUtun(deviceFd, l)
if err != nil {
// We own the fd from the moment it is handed to us
_ = unix.Close(deviceFd)
return nil, fmt.Errorf("failed to set the tun fd to non-blocking mode: %w", err)
return nil, err
}
file := os.NewFile(uintptr(deviceFd), "/dev/tun")
t := &tun{
f: file,
queue: queue,
Device: utunNameFromFd(deviceFd),
vpnNetworks: vpnNetworks,
DefaultMTU: getMTU(l, c),
DefaultMTU: c.GetInt("tun.mtu", DefaultMTU),
hostOwned: true,
l: l,
}
if err := t.reload(c, true, nil); err != nil {
_ = file.Close()
if err := t.reload(c, true); err != nil {
_ = queue.Close()
return nil, err
}
c.RegisterReloadCallback(func(c *config.C, r *config.Reload) {
if err := t.reload(c, false, r); err != nil {
c.RegisterReloadCallback(func(c *config.C) {
if err := t.reload(c, false); err != nil {
util.LogWithContextIfNeeded("failed to reload tun device", err, t.l)
r.Failed()
}
})
@@ -219,8 +195,8 @@ func utunNameFromFd(fd int) string {
}
func (t *tun) Close() error {
if t.f != nil {
return t.f.Close()
if t.queue != nil {
return t.queue.Close()
}
return nil
}
@@ -265,7 +241,7 @@ func (t *tun) Activate() error {
if linkAddr == nil {
return fmt.Errorf("unable to discover link_addr for tun interface")
}
t.linkAddr.Store(linkAddr)
t.linkAddr = linkAddr
for _, network := range t.vpnNetworks {
if network.Addr().Is4() {
@@ -288,10 +264,9 @@ func (t *tun) Activate() error {
}
// Unsafe path routes
return t.addRoutes(false, nil)
return t.addRoutes(false)
}
// activate4 assigns our vpn address as a /32 and routes the vpn network to the tun explicitly.
func (t *tun) activate4(network netip.Prefix) error {
s, err := unix.Socket(
unix.AF_INET,
@@ -318,32 +293,22 @@ func (t *tun) activate4(network netip.Prefix) error {
MaskAddr: unix.RawSockaddrInet4{
Len: unix.SizeofSockaddrInet4,
Family: unix.AF_INET,
Addr: [4]byte{255, 255, 255, 255}, //always make the address a /32
Addr: prefixToMask(network).As4(),
},
}
// On Darwin, VPNs don't edit the routing table directly.
// A network extension hands its routes to the system, and configd installs them.
// configd replaces any route already holding the same prefix, including ours.
// As an example, Tailscale with an exit node treats any interface prefix wider than one address as a LAN.
// With LAN access off, it routes each LAN into Tailscale's utun.
// With LAN access on, it excludes each LAN from its tunnel.
// configd routes an excluded prefix like its own routes would, ignoring ours, so it goes out the default route.
// Either way our route is replaced, and traffic for the vpn network no longer reaches nebula.
// A single address isn't a LAN to Tailscale, so our route is left alone.
// We route the vpn network to the tun explicitly instead.
if err := ioctl(uintptr(s), unix.SIOCAIFADDR, uintptr(unsafe.Pointer(&ifr))); err != nil {
return fmt.Errorf("failed to set tun v4 address: %s", err)
}
if err := addRoute(network, t.linkAddr.Load()); err != nil {
return fmt.Errorf("failed to add route for %v: %w", network.Masked(), err)
err = addRoute(network, t.linkAddr)
if err != nil {
return err
}
return nil
}
// activate6 is activate4 for IPv6
func (t *tun) activate6(network netip.Prefix) error {
s, err := unix.Socket(
unix.AF_INET6,
@@ -365,29 +330,25 @@ func (t *tun) activate6(network netip.Prefix) error {
PrefixMask: unix.RawSockaddrInet6{
Len: unix.SizeofSockaddrInet6,
Family: unix.AF_INET6,
// Always set the netmask to be a /128. See activate4 for why we do this.
Addr: [16]byte{255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255},
Addr: prefixToMask(network).As16(),
},
Lifetime: addrLifetime{
// never expires
Vltime: 0xffffffff,
Pltime: 0xffffffff,
},
Flags: _IN6_IFF_NODAD, // No DAD, a utun has no neighbors.
Flags: _IN6_IFF_NODAD,
}
if err := ioctl(uintptr(s), _SIOCAIFADDR_IN6, uintptr(unsafe.Pointer(&ifr))); err != nil {
return fmt.Errorf("failed to set tun address: %s", err)
}
if err := addRoute(network, t.linkAddr.Load()); err != nil {
return fmt.Errorf("failed to add route for %v: %w", network.Masked(), err)
}
return nil
}
func (t *tun) reload(c *config.C, initial bool, r *config.Reload) error {
change, routes, err := getAllRoutesFromConfig(t.l, c, t.vpnNetworks, initial)
func (t *tun) reload(c *config.C, initial bool) error {
change, routes, err := getAllRoutesFromConfig(c, t.vpnNetworks, initial)
if err != nil {
return err
}
@@ -407,18 +368,16 @@ func (t *tun) reload(c *config.C, initial bool, r *config.Reload) error {
if !initial {
// Remove first, if the system removes a wanted route hopefully it will be re-added next
err := t.removeRoutes(findRemovedRoutes(routes, *oldRoutes), r)
err := t.removeRoutes(findRemovedRoutes(routes, *oldRoutes))
if err != nil {
util.LogWithContextIfNeeded("Failed to remove routes", err, t.l)
r.Failed()
}
// Ensure any routes we actually want are installed
err = t.addRoutes(true, r)
err = t.addRoutes(true)
if err != nil {
// Catch any stray logs
util.LogWithContextIfNeeded("Failed to add routes", err, t.l)
r.Failed()
}
}
@@ -433,56 +392,6 @@ func (t *tun) RoutesFor(ip netip.Addr) routing.Gateways {
return routing.Gateways{}
}
func fetchRoutes() ([]netroute.Message, error) {
rib, err := netroute.FetchRIB(unix.AF_UNSPEC, unix.NET_RT_DUMP, 0)
if err != nil {
return nil, err
}
return netroute.ParseRIB(unix.NET_RT_DUMP, rib)
}
// routeInterfaceIn returns the index of the interface prefix is routed through, or 0 if msgs has no route for exactly
// that prefix. Routes scoped to an interface are skipped, they don't stop us adding ours.
func routeInterfaceIn(msgs []netroute.Message, prefix netip.Prefix) int {
for _, msg := range msgs {
m, ok := msg.(*netroute.RouteMessage)
if !ok || len(m.Addrs) <= unix.RTAX_NETMASK || m.Flags&unix.RTF_IFSCOPE != 0 {
continue
}
if p, ok := routePrefix(m.Addrs[unix.RTAX_DST], m.Addrs[unix.RTAX_NETMASK]); ok && p == prefix.Masked() {
return m.Index
}
}
return 0
}
// routePrefix returns the prefix a route covers. Host routes have no netmask.
func routePrefix(dst, mask netroute.Addr) (netip.Prefix, bool) {
switch d := dst.(type) {
case *netroute.Inet4Addr:
bits := 32
if m, ok := mask.(*netroute.Inet4Addr); ok {
bits = maskBits(m.IP[:])
}
return netip.PrefixFrom(netip.AddrFrom4(d.IP), bits), true
case *netroute.Inet6Addr:
bits := 128
if m, ok := mask.(*netroute.Inet6Addr); ok {
bits = maskBits(m.IP[:])
}
return netip.PrefixFrom(netip.AddrFrom16(d.IP), bits), true
}
return netip.Prefix{}, false
}
func maskBits(mask []byte) int {
n := 0
for _, b := range mask {
n += bits.OnesCount8(b)
}
return n
}
// Get the LinkAddr for the interface of the given name
// Is there an easier way to fetch this when we create the interface?
// Maybe SIOCGIFINDEX? but this doesn't appear to exist in the darwin headers.
@@ -511,20 +420,13 @@ func getLinkAddr(name string) (*netroute.LinkAddr, error) {
return nil, nil
}
func (t *tun) addRoutes(logErrors bool, rl *config.Reload) error {
func (t *tun) addRoutes(logErrors bool) error {
// The route tree is still ours, the system routing table is not
if t.hostOwned {
return nil
}
// Activate hasn't run yet, it will install the routes
linkAddr := t.linkAddr.Load()
if linkAddr == nil {
return nil
}
routes := *t.Routes.Load()
systemRoutes := sync.OnceValues(fetchRoutes)
for _, r := range routes {
if len(r.Via) == 0 || !r.Install {
@@ -532,54 +434,39 @@ func (t *tun) addRoutes(logErrors bool, rl *config.Reload) error {
continue
}
err := addRoute(r.Cidr, linkAddr)
err := addRoute(r.Cidr, t.linkAddr)
if err != nil {
if errors.Is(err, unix.EEXIST) {
// Every route we added already exists on a reload, only warn about someone else's
msgs, err := systemRoutes()
if err != nil {
t.l.Warn("unable to add unsafe_route, a route already exists but its interface could not be determined", "route", r.Cidr, "error", err)
} else if routeInterfaceIn(msgs, r.Cidr) != linkAddr.Index {
t.l.Warn("unable to add unsafe_route, the destination is already routed through another interface", "route", r.Cidr)
}
t.l.Warn("unable to add unsafe_route, identical route already exists", "route", r.Cidr)
} else {
retErr := util.NewContextualError("Failed to add route", map[string]any{"route": r}, err)
if logErrors {
retErr.Log(t.l)
rl.Failed()
} else {
return retErr
}
}
} else {
t.l.Info("Added route", "route", r)
// A cidr listed twice would otherwise find our own route missing from an older fetch
systemRoutes = sync.OnceValues(fetchRoutes)
}
}
return nil
}
func (t *tun) removeRoutes(routes []Route, rl *config.Reload) error {
linkAddr := t.linkAddr.Load()
if t.hostOwned || linkAddr == nil {
func (t *tun) removeRoutes(routes []Route) error {
if t.hostOwned {
return nil
}
for _, r := range routes {
if len(r.Via) == 0 || !r.Install {
// addRoutes never installs these
if !r.Install {
continue
}
err := delRoute(r.Cidr, linkAddr)
if errors.Is(err, unix.ESRCH) {
// Already gone, which is what we wanted
t.l.Info("Route was already removed", "route", r)
} else if err != nil {
err := delRoute(r.Cidr, t.linkAddr)
if err != nil {
t.l.Error("Failed to remove route", "error", err, "route", r)
rl.Failed()
} else {
t.l.Info("Removed route", "route", r)
}
@@ -667,107 +554,6 @@ func delRoute(prefix netip.Prefix, gateway netroute.Addr) error {
return nil
}
// tunWritev and tunReadv are linkname'd to x/sys/unix's libc-routed writev/readv stubs so the
// calls go through libSystem's pinned trampoline. A raw syscall.Syscall(SYS_WRITEV/SYS_READV, ...)
// on darwin/arm64 emits an SVC #0x80 trap (see $GOROOT/src/syscall/asm_darwin_arm64.s), the path
// Apple keeps warning they will eventually disallow. We pull the low-level stubs instead of calling
// unix.Writev/unix.Readv because those take [][]byte and rebuild the []Iovec every call, which
// heap-allocates the header; linkname'ing the stubs lets us hand them our own stack-allocated
// iovecs. See golang/go#78049.
//go:linkname tunWritev golang.org/x/sys/unix.writev
//go:noescape
func tunWritev(fd int, iovecs []unix.Iovec) (n int, err error)
//go:linkname tunReadv golang.org/x/sys/unix.readv
//go:noescape
func tunReadv(fd int, iovecs []unix.Iovec) (n int, err error)
// Read pulls one IP packet off the utun device, scattering the 4 byte protocol header away from
// the packet so the payload lands directly in to.
func (t *tun) Read(to []byte) (int, error) {
var head [4]byte
rc, err := t.f.SyscallConn()
if err != nil {
return 0, err
}
var n int
var callErr error
err = rc.Read(func(fd uintptr) bool {
iovecs := []unix.Iovec{
{Base: &head[0], Len: 4},
{Base: &to[0], Len: uint64(len(to))},
}
n, callErr = tunReadv(int(fd), iovecs)
if errno, ok := callErr.(syscall.Errno); ok && errno.Temporary() {
return false
}
return true
})
if err != nil {
return 0, err
}
if callErr != nil {
return 0, callErr
}
if n < 4 {
return 0, nil
}
return n - 4, nil
}
// Write pushes one IP packet onto the utun device. Safe for concurrent use:
// the AF prefix and iovecs are per-call stack state, and the fd write itself
// serializes on the runtime's fd mutex (see the Queue contract in tio.go).
func (t *tun) Write(from []byte) (int, error) {
if len(from) == 0 {
return 0, syscall.EIO
}
ipVer := from[0] >> 4
var head [4]byte
switch ipVer {
case 4:
head[3] = syscall.AF_INET
case 6:
head[3] = syscall.AF_INET6
default:
return 0, fmt.Errorf("unable to determine IP version from packet")
}
// Grab rc as a local so the compiler can devirtualize the call and keep the closure on the stack.
rc, err := t.f.SyscallConn()
if err != nil {
return 0, err
}
var n int
var callErr error
err = rc.Write(func(fd uintptr) bool {
iovecs := []unix.Iovec{
{Base: &head[0], Len: 4},
{Base: &from[0], Len: uint64(len(from))},
}
n, callErr = tunWritev(int(fd), iovecs)
// Type-assert to syscall.Errno so the EAGAIN/EWOULDBLOCK/EINTR check doesn't box the errno
// constants into error interfaces on every call.
if errno, ok := callErr.(syscall.Errno); ok && errno.Temporary() {
return false
}
return true
})
if err != nil {
return 0, err
}
if callErr != nil {
return 0, callErr
}
return n - 4, nil
}
func (t *tun) Networks() []netip.Prefix {
return t.vpnNetworks
}
@@ -777,5 +563,5 @@ func (t *tun) Name() string {
}
func (t *tun) Queues(int) ([]tio.Queue, error) {
return []tio.Queue{tio.NewSingleQueue(t, defaultBatchBufSize)}, nil
return []tio.Queue{t.queue}, nil
}
-118
View File
@@ -1,118 +0,0 @@
//go:build darwin && !ios && !e2e_testing
package overlay
import (
"net"
"net/netip"
"os"
"os/exec"
"strings"
"testing"
"github.com/slackhq/nebula/config"
"github.com/slackhq/nebula/routing"
"github.com/slackhq/nebula/test"
"github.com/stretchr/testify/assert"
"github.com/stretchr/testify/require"
netroute "golang.org/x/net/route"
"golang.org/x/sys/unix"
)
// Every mac routes loopback through lo0
func TestRouteInterfaceIn(t *testing.T) {
msgs, err := fetchRoutes()
require.NoError(t, err)
routeInterface := func(s string) int { return routeInterfaceIn(msgs, netip.MustParsePrefix(s)) }
lo0, err := net.InterfaceByName("lo0")
require.NoError(t, err)
assert.Equal(t, lo0.Index, routeInterface("127.0.0.0/8"))
assert.Equal(t, lo0.Index, routeInterface("127.0.0.1/32"), "a host route has no netmask")
assert.Equal(t, lo0.Index, routeInterface("::1/128"))
assert.Equal(t, 0, routeInterface("127.0.0.0/16"), "only an exact prefix counts")
// Most macs also list the default route scoped to their other interfaces
out, err := exec.Command("route", "-n", "get", "default").Output()
require.NoError(t, err)
var name string
for _, line := range strings.Split(string(out), "\n") {
if v, ok := strings.CutPrefix(strings.TrimSpace(line), "interface: "); ok {
name = v
}
}
if name == "" {
t.Skip("no default route")
}
def, err := net.InterfaceByName(name)
require.NoError(t, err)
assert.Equal(t, def.Index, routeInterface("0.0.0.0/0"))
}
func TestRouteInterfaceIn_SkipsScopedCopies(t *testing.T) {
route := func(index, flags int) netroute.Message {
addrs := make([]netroute.Addr, unix.RTAX_MAX)
addrs[unix.RTAX_DST] = &netroute.Inet4Addr{IP: [4]byte{192, 168, 1, 0}}
addrs[unix.RTAX_NETMASK] = &netroute.Inet4Addr{IP: [4]byte{255, 255, 255, 0}}
return &netroute.RouteMessage{Index: index, Flags: flags, Addrs: addrs}
}
p := netip.MustParsePrefix("192.168.1.0/24")
assert.Equal(t, 7, routeInterfaceIn([]netroute.Message{route(4, unix.RTF_UP|unix.RTF_IFSCOPE), route(7, unix.RTF_UP)}, p))
assert.Equal(t, 0, routeInterfaceIn([]netroute.Message{route(4, unix.RTF_UP|unix.RTF_IFSCOPE)}, p))
}
// A reload can happen before Activate
func TestTunRoutesBeforeActivate(t *testing.T) {
tn := &tun{l: test.NewLogger()}
routes := []Route{{
Cidr: netip.MustParsePrefix("10.253.1.0/24"),
Via: routing.Gateways{routing.NewGateway(netip.MustParseAddr("10.250.0.2"), 1)},
Install: true,
}}
tn.Routes.Store(&routes)
assert.NoError(t, tn.addRoutes(true, nil))
assert.NoError(t, tn.removeRoutes(routes, nil))
}
// A tun.routes entry with no via is never installed, so removing it must not delete a route for the same cidr that
// belongs to someone else
func TestTunReloadLeavesRoutesItNeverInstalled(t *testing.T) {
if os.Geteuid() != 0 {
t.Skip("creating a utun and adding routes needs root")
}
lo0, err := net.InterfaceByName("lo0")
require.NoError(t, err)
cidr := "10.250.0.128/25"
require.NoError(t, exec.Command("route", "-q", "-n", "add", "-net", cidr, "-interface", "lo0").Run())
t.Cleanup(func() { _ = exec.Command("route", "-q", "-n", "delete", "-net", cidr).Run() })
l := test.NewLogger()
c := config.NewC(l)
require.NoError(t, c.LoadString("tun:\n routes:\n - route: "+cidr+"\n mtu: 1300\n"))
tn, err := newTun(c, l, []netip.Prefix{netip.MustParsePrefix("10.250.0.1/24")}, false)
require.NoError(t, err)
t.Cleanup(func() { _ = tn.Close() })
require.NoError(t, tn.Activate())
res := c.ReloadConfigString("tun: {}\n")
require.NoError(t, res.Err)
assert.False(t, res.Failed, "removing a route we never installed failed the reload")
msgs, err := fetchRoutes()
require.NoError(t, err)
assert.Equal(t, lo0.Index, routeInterfaceIn(msgs, netip.MustParsePrefix(cidr)))
}
// Only naming a different utun asks for a restart. Empty, plain utun and names that aren't utunN take whichever is free
func TestTunDevNeedsRestart(t *testing.T) {
for name, want := range map[string]bool{
"": false,
"utun": false,
"nope": false,
"utun7": false,
"utun3": true,
} {
assert.Equal(t, want, tunDevNeedsRestart(name, "utun7"), name)
}
}
-121
View File
@@ -1,121 +0,0 @@
//go:build !ios && !e2e_testing
package overlay
import (
"bytes"
"os"
"syscall"
"testing"
"github.com/stretchr/testify/require"
)
func TestTun_WriteFraming(t *testing.T) {
r, w, err := os.Pipe()
require.NoError(t, err)
defer r.Close()
defer w.Close()
tn := &tun{f: w}
for _, tc := range []struct {
name string
pkt []byte
af byte
}{
// Literal families rather than syscall.AF_*, so a wrong constant in Write can't also fix the expectation.
{"ipv4", []byte{0x45, 1, 2, 3, 4, 5}, 2},
{"ipv6", []byte{0x60, 1, 2, 3, 4, 5}, 30},
} {
t.Run(tc.name, func(t *testing.T) {
n, err := tn.Write(tc.pkt)
require.NoError(t, err)
require.Equal(t, len(tc.pkt), n)
got := make([]byte, 64)
n, err = r.Read(got)
require.NoError(t, err)
require.Equal(t, append([]byte{0, 0, 0, tc.af}, tc.pkt...), got[:n])
})
}
_, err = tn.Write([]byte{0x10, 1, 2, 3})
require.Error(t, err)
_, err = tn.Write([]byte{})
require.ErrorIs(t, err, syscall.EIO)
// The rejected writes must not have put anything on the fd, so the next read sees only this packet.
pkt := []byte{0x45, 9, 9}
_, err = tn.Write(pkt)
require.NoError(t, err)
got := make([]byte, 64)
n, err := r.Read(got)
require.NoError(t, err)
require.Equal(t, append([]byte{0, 0, 0, 2}, pkt...), got[:n])
}
func TestTun_ReadStripsHeader(t *testing.T) {
r, w, err := os.Pipe()
require.NoError(t, err)
defer r.Close()
defer w.Close()
tn := &tun{f: r}
pkt := []byte{0x45, 1, 2, 3, 4, 5}
_, err = w.Write(append([]byte{0, 0, 0, syscall.AF_INET}, pkt...))
require.NoError(t, err)
got := make([]byte, 64)
n, err := tn.Read(got)
require.NoError(t, err)
require.Equal(t, pkt, got[:n])
}
func TestTun_ReadShort(t *testing.T) {
r, w, err := os.Pipe()
require.NoError(t, err)
defer r.Close()
defer w.Close()
tn := &tun{f: r}
// Fewer bytes than the protocol header is not a packet.
_, err = w.Write([]byte{0, 0})
require.NoError(t, err)
n, err := tn.Read(make([]byte, 64))
require.NoError(t, err)
require.Zero(t, n)
// The next packet reads cleanly only if the short read consumed exactly what was written.
pkt := []byte{0x45, 1, 2, 3}
_, err = w.Write(append([]byte{0, 0, 0, syscall.AF_INET}, pkt...))
require.NoError(t, err)
got := make([]byte, 64)
n, err = tn.Read(got)
require.NoError(t, err)
require.Equal(t, pkt, got[:n])
}
// A heap allocation per packet rarely shows in a short throughput run, only across GC pauses, so
// this pins Read and Write to zero allocations directly.
func TestTun_ReadWriteDoNotAllocate(t *testing.T) {
r, w, err := os.Pipe()
require.NoError(t, err)
defer r.Close()
defer w.Close()
tw := &tun{f: w}
tr := &tun{f: r}
pkts := [][]byte{bytes.Repeat([]byte{0x45}, 1300), bytes.Repeat([]byte{0x60}, 1300)}
buf := make([]byte, 1500)
i := 0
allocs := testing.AllocsPerRun(1000, func() {
i++
if _, err := tw.Write(pkts[i%len(pkts)]); err != nil {
t.Fatal(err)
}
if _, err := tr.Read(buf); err != nil {
t.Fatal(err)
}
})
require.Zero(t, allocs)
}
+13 -23
View File
@@ -370,7 +370,7 @@ func newTun(c *config.C, l *slog.Logger, vpnNetworks []netip.Prefix, _ bool) (*t
t := &tun{
Device: deviceName,
vpnNetworks: vpnNetworks,
MTU: getMTU(l, c),
MTU: c.GetInt("tun.mtu", DefaultMTU),
l: l,
fd: fd,
shutdownR: shutdownR,
@@ -385,18 +385,16 @@ func newTun(c *config.C, l *slog.Logger, vpnNetworks []netip.Prefix, _ bool) (*t
},
}
err = t.reload(c, true, nil)
err = t.reload(c, true)
if err != nil {
return nil, err
}
closeOnErr = false
c.RegisterReloadCallback(func(c *config.C, r *config.Reload) {
r.RestartRequiredIfChanged("tun.dev", "tun.mtu")
err := t.reload(c, false, r)
c.RegisterReloadCallback(func(c *config.C) {
err := t.reload(c, false)
if err != nil {
util.LogWithContextIfNeeded("failed to reload tun device", err, t.l)
r.Failed()
}
})
@@ -495,7 +493,7 @@ func (t *tun) Activate() error {
}
}
return t.addRoutes(false, nil)
return t.addRoutes(false)
}
func (t *tun) setMTU() error {
@@ -511,8 +509,8 @@ func (t *tun) setMTU() error {
return err
}
func (t *tun) reload(c *config.C, initial bool, r *config.Reload) error {
change, routes, err := getAllRoutesFromConfig(t.l, c, t.vpnNetworks, initial)
func (t *tun) reload(c *config.C, initial bool) error {
change, routes, err := getAllRoutesFromConfig(c, t.vpnNetworks, initial)
if err != nil {
return err
}
@@ -532,18 +530,16 @@ func (t *tun) reload(c *config.C, initial bool, r *config.Reload) error {
if !initial {
// Remove first, if the system removes a wanted route hopefully it will be re-added next
err := t.removeRoutes(findRemovedRoutes(routes, *oldRoutes), r)
err := t.removeRoutes(findRemovedRoutes(routes, *oldRoutes))
if err != nil {
util.LogWithContextIfNeeded("Failed to remove routes", err, t.l)
r.Failed()
}
// Ensure any routes we actually want are installed
err = t.addRoutes(true, r)
err = t.addRoutes(true)
if err != nil {
// Catch any stray logs
util.LogWithContextIfNeeded("Failed to add routes", err, t.l)
r.Failed()
}
}
@@ -567,7 +563,7 @@ func (t *tun) Queues(int) ([]tio.Queue, error) {
return []tio.Queue{tio.NewSingleQueue(t, defaultBatchBufSize)}, nil
}
func (t *tun) addRoutes(logErrors bool, rl *config.Reload) error {
func (t *tun) addRoutes(logErrors bool) error {
routes := *t.Routes.Load()
for _, r := range routes {
if len(r.Via) == 0 || !r.Install {
@@ -580,7 +576,6 @@ func (t *tun) addRoutes(logErrors bool, rl *config.Reload) error {
retErr := util.NewContextualError("Failed to add route", map[string]any{"route": r}, err)
if logErrors {
retErr.Log(t.l)
rl.Failed()
} else {
return retErr
}
@@ -592,20 +587,15 @@ func (t *tun) addRoutes(logErrors bool, rl *config.Reload) error {
return nil
}
func (t *tun) removeRoutes(routes []Route, rl *config.Reload) error {
func (t *tun) removeRoutes(routes []Route) error {
for _, r := range routes {
if len(r.Via) == 0 || !r.Install {
// addRoutes never installs these
if !r.Install {
continue
}
err := delRoute(r.Cidr, t.linkAddr)
if errors.Is(err, unix.ESRCH) {
// Already gone, which is what we wanted
t.l.Info("Route was already removed", "route", r)
} else if err != nil {
if err != nil {
t.l.Error("Failed to remove route", "error", err, "route", r)
rl.Failed()
} else {
t.l.Info("Removed route", "route", r)
}
+5 -6
View File
@@ -47,17 +47,16 @@ func newTunFromFd(c *config.C, l *slog.Logger, deviceFd int, vpnNetworks []netip
l: l,
}
err := t.reload(c, true, nil)
err := t.reload(c, true)
if err != nil {
_ = file.Close()
return nil, err
}
c.RegisterReloadCallback(func(c *config.C, r *config.Reload) {
err := t.reload(c, false, r)
c.RegisterReloadCallback(func(c *config.C) {
err := t.reload(c, false)
if err != nil {
util.LogWithContextIfNeeded("failed to reload tun device", err, t.l)
r.Failed()
}
})
@@ -68,8 +67,8 @@ func (t *tun) Activate() error {
return nil
}
func (t *tun) reload(c *config.C, initial bool, r *config.Reload) error {
change, routes, err := getAllRoutesFromConfig(t.l, c, t.vpnNetworks, initial)
func (t *tun) reload(c *config.C, initial bool) error {
change, routes, err := getAllRoutesFromConfig(c, t.vpnNetworks, initial)
if err != nil {
return err
}
+18 -41
View File
@@ -185,10 +185,6 @@ func newTun(c *config.C, l *slog.Logger, vpnNetworks []netip.Prefix, multiqueue
}
t.Device = name
// Only read when we create the device, an fd handed to us already has its name and offloads
c.RegisterReloadCallback(func(c *config.C, r *config.Reload) {
r.RestartRequiredIfChanged("tun.dev", "tun.use_offloads")
})
return t, nil
}
@@ -225,32 +221,30 @@ func newTunGeneric(c *config.C, l *slog.Logger, fd int, vnetHdr bool, offloadFla
vnetHdr: vnetHdr,
offloadFlags: offloadFlags,
vpnNetworks: vpnNetworks,
TXQueueLen: c.GetInt("tun.tx_queue", 5000),
TXQueueLen: c.GetInt("tun.tx_queue", 500),
useSystemRoutes: c.GetBool("tun.use_system_route_table", false),
useSystemRoutesBufferSize: c.GetInt("tun.use_system_route_table_buffer_size", 0),
routesFromSystem: map[netip.Prefix]routing.Gateways{},
l: l,
}
if err = t.reload(c, true, nil); err != nil {
if err = t.reload(c, true); err != nil {
_ = t.Close()
return nil, err
}
c.RegisterReloadCallback(func(c *config.C, r *config.Reload) {
r.RestartRequiredIfChanged("tun.tx_queue", "tun.use_system_route_table", "tun.use_system_route_table_buffer_size")
err := t.reload(c, false, r)
c.RegisterReloadCallback(func(c *config.C) {
err := t.reload(c, false)
if err != nil {
util.LogWithContextIfNeeded("failed to reload tun device", err, t.l)
r.Failed()
}
})
return t, nil
}
func (t *tun) reload(c *config.C, initial bool, r *config.Reload) error {
routeChange, routes, err := getAllRoutesFromConfig(t.l, c, t.vpnNetworks, initial)
func (t *tun) reload(c *config.C, initial bool) error {
routeChange, routes, err := getAllRoutesFromConfig(c, t.vpnNetworks, initial)
if err != nil {
return err
}
@@ -259,15 +253,6 @@ func (t *tun) reload(c *config.C, initial bool, r *config.Reload) error {
return nil
}
// Only the mtu changed. The routes are the same, parse them again so the ones without their own mtu pick up the
// new default. Without this an mtu change would remove them all
if !routeChange {
_, routes, err = getAllRoutesFromConfig(t.l, c, t.vpnNetworks, true)
if err != nil {
return err
}
}
routeTree, err := makeRouteTree(t.l, routes, true)
if err != nil {
return err
@@ -282,14 +267,14 @@ func (t *tun) reload(c *config.C, initial bool, r *config.Reload) error {
oldDefaultMTU := t.DefaultMTU
oldMaxMTU := t.MaxMTU
newDefaultMTU := getMTU(t.l, c)
newDefaultMTU := c.GetInt("tun.mtu", DefaultMTU)
newMaxMTU := newDefaultMTU
for i, r := range routes {
if r.MTU == 0 {
routes[i].MTU = newDefaultMTU
}
if r.MTU > newMaxMTU {
if r.MTU > t.MaxMTU {
newMaxMTU = r.MTU
}
}
@@ -303,7 +288,7 @@ func (t *tun) reload(c *config.C, initial bool, r *config.Reload) error {
if !initial {
if oldMaxMTU != newMaxMTU {
t.setMTU(r)
t.setMTU()
t.l.Info("Set max MTU", "mtu", t.MaxMTU, "oldMTU", oldMaxMTU)
}
@@ -311,8 +296,7 @@ func (t *tun) reload(c *config.C, initial bool, r *config.Reload) error {
for i := range t.vpnNetworks {
err := t.setDefaultRoute(t.vpnNetworks[i])
if err != nil {
t.l.Error(err.Error())
r.Failed()
t.l.Warn(err.Error())
} else {
t.l.Info("Set default MTU", "mtu", t.DefaultMTU, "oldMTU", oldDefaultMTU)
}
@@ -320,14 +304,13 @@ func (t *tun) reload(c *config.C, initial bool, r *config.Reload) error {
}
// Remove first, if the system removes a wanted route hopefully it will be re-added next
t.removeRoutes(findRemovedRoutes(routes, *oldRoutes), r)
t.removeRoutes(findRemovedRoutes(routes, *oldRoutes))
// Ensure any routes we actually want are installed
err = t.addRoutes(true, r)
err = t.addRoutes(true)
if err != nil {
// This should never be called since addRoutes should log its own errors in a reload condition
util.LogWithContextIfNeeded("Failed to refresh routes", err, t.l)
r.Failed()
}
}
@@ -482,7 +465,7 @@ func (t *tun) Activate() error {
t.deviceIndex = link.Attrs().Index
// Setup our default MTU
t.setMTU(nil)
t.setMTU()
// Set the transmit queue length
ifrq := ifreqQLEN{Name: devName, Value: int32(t.TXQueueLen)}
@@ -514,7 +497,7 @@ func (t *tun) Activate() error {
}
// Set the routes
if err = t.addRoutes(false, nil); err != nil {
if err = t.addRoutes(false); err != nil {
return err
}
@@ -527,13 +510,12 @@ func (t *tun) Activate() error {
return nil
}
func (t *tun) setMTU(r *config.Reload) {
func (t *tun) setMTU() {
// Set the MTU on the device
ifm := ifreqMTU{Name: t.deviceBytes(), MTU: int32(t.MaxMTU)}
if err := ioctl(t.ioctlFd, unix.SIOCSIFMTU, uintptr(unsafe.Pointer(&ifm))); err != nil {
// This is currently a non fatal condition because the route table must have the MTU set appropriately as well
t.l.Error("Failed to set tun mtu", "error", err)
r.Failed()
}
}
@@ -586,7 +568,7 @@ func (t *tun) setDefaultRoute(cidr netip.Prefix) error {
return nil
}
func (t *tun) addRoutes(logErrors bool, rl *config.Reload) error {
func (t *tun) addRoutes(logErrors bool) error {
// Path routes
routes := *t.Routes.Load()
for _, r := range routes {
@@ -616,7 +598,6 @@ func (t *tun) addRoutes(logErrors bool, rl *config.Reload) error {
retErr := util.NewContextualError("Failed to add route", map[string]any{"route": r}, err)
if logErrors {
retErr.Log(t.l)
rl.Failed()
} else {
return retErr
}
@@ -628,7 +609,7 @@ func (t *tun) addRoutes(logErrors bool, rl *config.Reload) error {
return nil
}
func (t *tun) removeRoutes(routes []Route, rl *config.Reload) {
func (t *tun) removeRoutes(routes []Route) {
for _, r := range routes {
if !r.Install {
continue
@@ -652,12 +633,8 @@ func (t *tun) removeRoutes(routes []Route, rl *config.Reload) {
}
err := netlink.RouteDel(&nr)
if errors.Is(err, unix.ESRCH) {
// Already gone, which is what we wanted
t.l.Info("Route was already removed", "route", r)
} else if err != nil {
if err != nil {
t.l.Error("Failed to remove route", "error", err, "route", r)
rl.Failed()
} else {
t.l.Info("Removed route", "route", r)
}
+27 -27
View File
@@ -8,6 +8,7 @@ import (
"log/slog"
"net/netip"
"os"
"regexp"
"sync/atomic"
"syscall"
"unsafe"
@@ -66,12 +67,24 @@ type tun struct {
fd int
}
var deviceNameRE = regexp.MustCompile(`^tun[0-9]+$`)
func newTunFromFd(_ *config.C, _ *slog.Logger, _ int, _ []netip.Prefix) (*tun, error) {
return nil, fmt.Errorf("newTunFromFd not supported in NetBSD")
}
func newTun(c *config.C, l *slog.Logger, vpnNetworks []netip.Prefix, _ bool) (*tun, error) {
fd, deviceName, err := openTun(l, c.GetString("tun.dev", ""))
// Try to open tun device
var err error
deviceName := c.GetString("tun.dev", "")
if deviceName == "" {
return nil, fmt.Errorf("a device name in the format of /dev/tunN must be specified")
}
if !deviceNameRE.MatchString(deviceName) {
return nil, fmt.Errorf("a device name in the format of /dev/tunN must be specified")
}
fd, err := unix.Open("/dev/"+deviceName, os.O_RDWR, 0)
if err != nil {
return nil, err
}
@@ -86,24 +99,19 @@ func newTun(c *config.C, l *slog.Logger, vpnNetworks []netip.Prefix, _ bool) (*t
fd: fd,
Device: deviceName,
vpnNetworks: vpnNetworks,
MTU: getMTU(l, c),
MTU: c.GetInt("tun.mtu", DefaultMTU),
l: l,
}
err = t.reload(c, true, nil)
err = t.reload(c, true)
if err != nil {
return nil, err
}
c.RegisterReloadCallback(func(c *config.C, r *config.Reload) {
r.RestartRequiredIfChanged("tun.mtu")
if tunDevNeedsRestart(c.GetString("tun.dev", ""), t.Device) {
r.RestartRequiredIfChanged("tun.dev")
}
err := t.reload(c, false, r)
c.RegisterReloadCallback(func(c *config.C) {
err := t.reload(c, false)
if err != nil {
util.LogWithContextIfNeeded("failed to reload tun device", err, t.l)
r.Failed()
}
})
@@ -316,7 +324,7 @@ func (t *tun) Activate() error {
}
}
return t.addRoutes(false, nil)
return t.addRoutes(false)
}
func (t *tun) doIoctlByName(ctl uintptr, value uint32) error {
@@ -331,8 +339,8 @@ func (t *tun) doIoctlByName(ctl uintptr, value uint32) error {
return err
}
func (t *tun) reload(c *config.C, initial bool, r *config.Reload) error {
change, routes, err := getAllRoutesFromConfig(t.l, c, t.vpnNetworks, initial)
func (t *tun) reload(c *config.C, initial bool) error {
change, routes, err := getAllRoutesFromConfig(c, t.vpnNetworks, initial)
if err != nil {
return err
}
@@ -352,18 +360,16 @@ func (t *tun) reload(c *config.C, initial bool, r *config.Reload) error {
if !initial {
// Remove first, if the system removes a wanted route hopefully it will be re-added next
err := t.removeRoutes(findRemovedRoutes(routes, *oldRoutes), r)
err := t.removeRoutes(findRemovedRoutes(routes, *oldRoutes))
if err != nil {
util.LogWithContextIfNeeded("Failed to remove routes", err, t.l)
r.Failed()
}
// Ensure any routes we actually want are installed
err = t.addRoutes(true, r)
err = t.addRoutes(true)
if err != nil {
// Catch any stray logs
util.LogWithContextIfNeeded("Failed to add routes", err, t.l)
r.Failed()
}
}
@@ -387,7 +393,7 @@ func (t *tun) Queues(int) ([]tio.Queue, error) {
return []tio.Queue{tio.NewSingleQueue(t, defaultBatchBufSize)}, nil
}
func (t *tun) addRoutes(logErrors bool, rl *config.Reload) error {
func (t *tun) addRoutes(logErrors bool) error {
routes := *t.Routes.Load()
for _, r := range routes {
@@ -401,7 +407,6 @@ func (t *tun) addRoutes(logErrors bool, rl *config.Reload) error {
retErr := util.NewContextualError("Failed to add route", map[string]any{"route": r}, err)
if logErrors {
retErr.Log(t.l)
rl.Failed()
} else {
return retErr
}
@@ -413,20 +418,15 @@ func (t *tun) addRoutes(logErrors bool, rl *config.Reload) error {
return nil
}
func (t *tun) removeRoutes(routes []Route, rl *config.Reload) error {
func (t *tun) removeRoutes(routes []Route) error {
for _, r := range routes {
if len(r.Via) == 0 || !r.Install {
// addRoutes never installs these
if !r.Install {
continue
}
err := delRoute(r.Cidr, t.vpnNetworks)
if errors.Is(err, unix.ESRCH) {
// Already gone, which is what we wanted
t.l.Info("Route was already removed", "route", r)
} else if err != nil {
if err != nil {
t.l.Error("Failed to remove route", "error", err, "route", r)
rl.Failed()
} else {
t.l.Info("Removed route", "route", r)
}
+27 -27
View File
@@ -8,6 +8,7 @@ import (
"log/slog"
"net/netip"
"os"
"regexp"
"sync/atomic"
"syscall"
"unsafe"
@@ -57,12 +58,24 @@ type tun struct {
fd int
}
var deviceNameRE = regexp.MustCompile(`^tun[0-9]+$`)
func newTunFromFd(_ *config.C, _ *slog.Logger, _ int, _ []netip.Prefix) (*tun, error) {
return nil, fmt.Errorf("newTunFromFd not supported in openbsd")
}
func newTun(c *config.C, l *slog.Logger, vpnNetworks []netip.Prefix, _ bool) (*tun, error) {
fd, deviceName, err := openTun(l, c.GetString("tun.dev", ""))
// Try to open tun device
var err error
deviceName := c.GetString("tun.dev", "")
if deviceName == "" {
return nil, fmt.Errorf("a device name in the format of /dev/tunN must be specified")
}
if !deviceNameRE.MatchString(deviceName) {
return nil, fmt.Errorf("a device name in the format of /dev/tunN must be specified")
}
fd, err := unix.Open("/dev/"+deviceName, os.O_RDWR, 0)
if err != nil {
return nil, err
}
@@ -77,24 +90,19 @@ func newTun(c *config.C, l *slog.Logger, vpnNetworks []netip.Prefix, _ bool) (*t
fd: fd,
Device: deviceName,
vpnNetworks: vpnNetworks,
MTU: getMTU(l, c),
MTU: c.GetInt("tun.mtu", DefaultMTU),
l: l,
}
err = t.reload(c, true, nil)
err = t.reload(c, true)
if err != nil {
return nil, err
}
c.RegisterReloadCallback(func(c *config.C, r *config.Reload) {
r.RestartRequiredIfChanged("tun.mtu")
if tunDevNeedsRestart(c.GetString("tun.dev", ""), t.Device) {
r.RestartRequiredIfChanged("tun.dev")
}
err := t.reload(c, false, r)
c.RegisterReloadCallback(func(c *config.C) {
err := t.reload(c, false)
if err != nil {
util.LogWithContextIfNeeded("failed to reload tun device", err, t.l)
r.Failed()
}
})
@@ -295,7 +303,7 @@ func (t *tun) Activate() error {
}
}
return t.addRoutes(false, nil)
return t.addRoutes(false)
}
func (t *tun) doIoctlByName(ctl uintptr, value uint32) error {
@@ -310,8 +318,8 @@ func (t *tun) doIoctlByName(ctl uintptr, value uint32) error {
return err
}
func (t *tun) reload(c *config.C, initial bool, r *config.Reload) error {
change, routes, err := getAllRoutesFromConfig(t.l, c, t.vpnNetworks, initial)
func (t *tun) reload(c *config.C, initial bool) error {
change, routes, err := getAllRoutesFromConfig(c, t.vpnNetworks, initial)
if err != nil {
return err
}
@@ -331,18 +339,16 @@ func (t *tun) reload(c *config.C, initial bool, r *config.Reload) error {
if !initial {
// Remove first, if the system removes a wanted route hopefully it will be re-added next
err := t.removeRoutes(findRemovedRoutes(routes, *oldRoutes), r)
err := t.removeRoutes(findRemovedRoutes(routes, *oldRoutes))
if err != nil {
util.LogWithContextIfNeeded("Failed to remove routes", err, t.l)
r.Failed()
}
// Ensure any routes we actually want are installed
err = t.addRoutes(true, r)
err = t.addRoutes(true)
if err != nil {
// Catch any stray logs
util.LogWithContextIfNeeded("Failed to add routes", err, t.l)
r.Failed()
}
}
@@ -366,7 +372,7 @@ func (t *tun) Queues(int) ([]tio.Queue, error) {
return []tio.Queue{tio.NewSingleQueue(t, defaultBatchBufSize)}, nil
}
func (t *tun) addRoutes(logErrors bool, rl *config.Reload) error {
func (t *tun) addRoutes(logErrors bool) error {
routes := *t.Routes.Load()
for _, r := range routes {
@@ -380,7 +386,6 @@ func (t *tun) addRoutes(logErrors bool, rl *config.Reload) error {
retErr := util.NewContextualError("Failed to add route", map[string]any{"route": r}, err)
if logErrors {
retErr.Log(t.l)
rl.Failed()
} else {
return retErr
}
@@ -392,20 +397,15 @@ func (t *tun) addRoutes(logErrors bool, rl *config.Reload) error {
return nil
}
func (t *tun) removeRoutes(routes []Route, rl *config.Reload) error {
func (t *tun) removeRoutes(routes []Route) error {
for _, r := range routes {
if len(r.Via) == 0 || !r.Install {
// addRoutes never installs these
if !r.Install {
continue
}
err := delRoute(r.Cidr, t.vpnNetworks)
if errors.Is(err, unix.ESRCH) {
// Already gone, which is what we wanted
t.l.Info("Route was already removed", "route", r)
} else if err != nil {
if err != nil {
t.l.Error("Failed to remove route", "error", err, "route", r)
rl.Failed()
} else {
t.l.Info("Removed route", "route", r)
}
-107
View File
@@ -1,107 +0,0 @@
//go:build !e2e_testing
package overlay
import (
"net/netip"
"os"
"testing"
"github.com/slackhq/nebula/config"
"github.com/slackhq/nebula/routing"
"github.com/slackhq/nebula/test"
"github.com/stretchr/testify/assert"
"github.com/stretchr/testify/require"
)
// Only tun.mtu changes. The system calls fail without a real device, what matters is the routes nebula keeps
func TestReloadMTUOnlyKeepsRoutes(t *testing.T) {
routes := " unsafe_routes:\n - route: 192.168.100.0/24\n via: 10.1.0.1\n"
c := config.NewC(test.NewLogger())
require.NoError(t, c.LoadString("tun:\n mtu: 1300\n"+routes))
tn := &tun{
l: test.NewLogger(),
vpnNetworks: []netip.Prefix{netip.MustParsePrefix("10.1.0.2/24")},
ioctlFd: ^uintptr(0),
routesFromSystem: map[netip.Prefix]routing.Gateways{},
}
require.NoError(t, tn.reload(c, true, nil))
require.NoError(t, c.ReloadConfigString("tun:\n mtu: 1400\n"+routes).Err)
_ = tn.reload(c, false, nil)
got := *tn.Routes.Load()
require.Len(t, got, 1)
assert.Equal(t, netip.MustParsePrefix("192.168.100.0/24"), got[0].Cidr)
assert.Equal(t, 1400, got[0].MTU)
assert.Equal(t, 1400, tn.DefaultMTU)
}
// The device mtu has to fit the largest route mtu, wherever it sits in the list
func TestReloadMaxMTUIsTheLargestRoute(t *testing.T) {
c := config.NewC(test.NewLogger())
require.NoError(t, c.LoadString("tun:\n mtu: 1300\n unsafe_routes:\n"+
" - route: 192.168.100.0/24\n via: 10.1.0.1\n mtu: 1500\n"+
" - route: 192.168.101.0/24\n via: 10.1.0.1\n mtu: 1400\n"))
tn := &tun{
l: test.NewLogger(),
vpnNetworks: []netip.Prefix{netip.MustParsePrefix("10.1.0.2/24")},
ioctlFd: ^uintptr(0),
routesFromSystem: map[netip.Prefix]routing.Gateways{},
}
require.NoError(t, tn.reload(c, true, nil))
assert.Equal(t, 1500, tn.MaxMTU)
assert.Equal(t, 1300, tn.DefaultMTU)
}
// There is no device behind this tun, so adding a route always fails. Removing one is refused without root, as root the
// kernel answers that the route isn't there, which is what we wanted
func TestReloadRouteFailures(t *testing.T) {
route := "tun:\n mtu: 1300\n unsafe_routes:\n - route: 192.168.100.0/24\n via: 10.1.0.1\n"
cases := []struct {
name string
from, to string
wantFails bool
}{
{"added", "tun:\n mtu: 1300\n", route, true},
{"removed", route, "tun:\n mtu: 1300\n", os.Geteuid() != 0},
{"unchanged", route, route + "punchy:\n punch: true\n", false},
}
for _, tc := range cases {
t.Run(tc.name, func(t *testing.T) {
c := config.NewC(test.NewLogger())
require.NoError(t, c.LoadString(tc.from))
tn := &tun{
l: test.NewLogger(),
vpnNetworks: []netip.Prefix{netip.MustParsePrefix("10.1.0.2/24")},
ioctlFd: ^uintptr(0),
routesFromSystem: map[netip.Prefix]routing.Gateways{},
}
require.NoError(t, tn.reload(c, true, nil))
c.RegisterReloadCallback(func(c *config.C, r *config.Reload) {
require.NoError(t, tn.reload(c, false, r))
})
res := c.ReloadConfigString(tc.to)
require.NoError(t, res.Err)
assert.Equal(t, tc.wantFails, res.Failed)
})
}
}
// Keys only read when the device is created need a restart to apply
func TestTunReloadRestartKeys(t *testing.T) {
c := config.NewC(test.NewLogger())
require.NoError(t, c.LoadString("tun:\n dev: nebrk0\n"))
tn, err := NewDeviceFromConfig(c, test.NewLogger(), []netip.Prefix{netip.MustParsePrefix("10.1.0.2/24")}, 1)
if err != nil {
t.Skipf("can't create a tun device here: %v", err)
}
t.Cleanup(func() { _ = tn.Close() })
res := c.ReloadConfigString("tun:\n disabled: true\n dev: nebrk1\n tx_queue: 100\n")
require.NoError(t, res.Err)
assert.ElementsMatch(t, []string{"tun.disabled", "tun.dev", "tun.tx_queue"}, res.RestartKeys)
}
-24
View File
@@ -1,24 +0,0 @@
package overlay
import (
"net/netip"
"testing"
"github.com/slackhq/nebula/config"
"github.com/slackhq/nebula/test"
"github.com/stretchr/testify/assert"
"github.com/stretchr/testify/require"
)
// tun.disabled and the disabled tun's settings are only read when the device is made
func TestDisabledTunRestartKeys(t *testing.T) {
c := config.NewC(test.NewLogger())
require.NoError(t, c.LoadString("tun:\n disabled: true\n"))
d, err := NewDeviceFromConfig(c, test.NewLogger(), []netip.Prefix{netip.MustParsePrefix("10.1.0.2/24")}, 1)
require.NoError(t, err)
t.Cleanup(func() { _ = d.Close() })
res := c.ReloadConfigString("tun:\n disabled: false\n tx_queue: 100\n")
require.NoError(t, res.Err)
assert.ElementsMatch(t, []string{"tun.disabled", "tun.tx_queue"}, res.RestartKeys)
}
+1 -1
View File
@@ -31,7 +31,7 @@ type TestTun struct {
}
func newTun(c *config.C, l *slog.Logger, vpnNetworks []netip.Prefix, _ bool) (*TestTun, error) {
_, routes, err := getAllRoutesFromConfig(l, c, vpnNetworks, true)
_, routes, err := getAllRoutesFromConfig(c, vpnNetworks, true)
if err != nil {
return nil, err
}
+15 -107
View File
@@ -4,7 +4,6 @@ package overlay
import (
"crypto"
"errors"
"fmt"
"log/slog"
"net/netip"
@@ -76,7 +75,7 @@ func newTun(c *config.C, l *slog.Logger, vpnNetworks []netip.Prefix, _ bool) (*w
t := &winTun{
Device: deviceName,
vpnNetworks: vpnNetworks,
MTU: getMTU(l, c),
MTU: c.GetInt("tun.mtu", DefaultMTU),
guid: *guid,
networkCategory: cat,
setCategory: setCat,
@@ -84,7 +83,7 @@ func newTun(c *config.C, l *slog.Logger, vpnNetworks []netip.Prefix, _ bool) (*w
l: l,
}
err = t.reload(c, true, nil)
err = t.reload(c, true)
if err != nil {
return nil, err
}
@@ -105,32 +104,18 @@ func newTun(c *config.C, l *slog.Logger, vpnNetworks []netip.Prefix, _ bool) (*w
}
t.tun = tunDevice.(*wintun.NativeTun)
// Disable registration before Activate assigns addresses and triggers it.
disableDNSRegistration(l, *guid)
c.RegisterReloadCallback(func(c *config.C, r *config.Reload) {
r.RestartRequiredIfChanged("tun.dev", "tun.mtu")
// Compare with the running category, not the last config. A restart with one we can't parse would fail, so say
// that now rather than ask for one, and going back to the running one after a bad reload needs no restart
if cat, setCat, err := parseNetworkCategory(c.GetString("tun.network_category", "private")); err != nil {
t.l.Error("Invalid tun.network_category, a restart with it would fail", "error", err)
r.Failed()
} else if cat != t.networkCategory || setCat != t.setCategory {
r.RestartRequiredIfChanged("tun.network_category")
}
r.RestartRequiredIfChanged(interfaceBypassKeys...)
err := t.reload(c, false, r)
c.RegisterReloadCallback(func(c *config.C) {
err := t.reload(c, false)
if err != nil {
util.LogWithContextIfNeeded("failed to reload tun device", err, t.l)
r.Failed()
}
})
return t, nil
}
func (t *winTun) reload(c *config.C, initial bool, r *config.Reload) error {
change, routes, err := getAllRoutesFromConfig(t.l, c, t.vpnNetworks, initial)
func (t *winTun) reload(c *config.C, initial bool) error {
change, routes, err := getAllRoutesFromConfig(c, t.vpnNetworks, initial)
if err != nil {
return err
}
@@ -150,18 +135,16 @@ func (t *winTun) reload(c *config.C, initial bool, r *config.Reload) error {
if !initial {
// Remove first, if the system removes a wanted route hopefully it will be re-added next
err := t.removeRoutes(findRemovedSystemRoutes(routes, *oldRoutes), r)
err := t.removeRoutes(findRemovedRoutes(routes, *oldRoutes))
if err != nil {
util.LogWithContextIfNeeded("Failed to remove routes", err, t.l)
r.Failed()
}
// Ensure any routes we actually want are installed
err = t.addRoutes(true, r)
err = t.addRoutes(true)
if err != nil {
// Catch any stray logs
util.LogWithContextIfNeeded("Failed to add routes", err, t.l)
r.Failed()
}
}
@@ -176,7 +159,7 @@ func (t *winTun) Activate() error {
return fmt.Errorf("failed to set address: %w", err)
}
err = t.addRoutes(false, nil)
err = t.addRoutes(false)
if err != nil {
return err
}
@@ -195,49 +178,33 @@ func (t *winTun) Activate() error {
return nil
}
func (t *winTun) addRoutes(logErrors bool, rl *config.Reload) error {
func (t *winTun) addRoutes(logErrors bool) error {
luid := winipcfg.LUID(t.tun.LUID())
routes := *t.Routes.Load()
foundDefault4 := false
carriesV6 := slices.ContainsFunc(t.vpnNetworks, func(p netip.Prefix) bool { return p.Addr().Is6() })
// A CIDR listed twice routes by its last entry, install only that one or each reload would flip between them. The
// same rule as systemRoutes
last := make(map[netip.Prefix]int, len(routes))
for i, r := range routes {
last[r.Cidr] = i
}
for i, r := range routes {
for _, r := range routes {
if len(r.Via) == 0 || !r.Install {
// We don't allow route MTUs so only install routes with a via
continue
}
if last[r.Cidr] != i {
continue
}
// A v6 unsafe_route is legal under a v4-only cert; uninstalled ones put nothing on the adapter.
carriesV6 = carriesV6 || r.Cidr.Addr().Is6()
// Add our unsafe route as an on-link route to the nebula tun device.
result, err := addRoute(luid, r)
err := luid.AddRoute(r.Cidr, unspecifiedNextHop(r.Cidr), uint32(r.Metric))
if err != nil {
retErr := util.NewContextualError("Failed to add route", map[string]any{"route": r}, err)
if logErrors {
retErr.Log(t.l)
rl.Failed()
continue
} else {
return retErr
}
} else {
switch result {
case routeAdded:
t.l.Info("Added route", "route", r)
case routeMetricUpdated:
t.l.Info("Updated route metric", "route", r)
}
t.l.Info("Added route", "route", r)
}
if !foundDefault4 {
@@ -288,7 +255,7 @@ func (t *winTun) setMTU(luid winipcfg.LUID, foundDefault4, carriesV6 bool) error
return nil
}
func (t *winTun) removeRoutes(routes []Route, rl *config.Reload) error {
func (t *winTun) removeRoutes(routes []Route) error {
luid := winipcfg.LUID(t.tun.LUID())
for _, r := range routes {
@@ -298,12 +265,8 @@ func (t *winTun) removeRoutes(routes []Route, rl *config.Reload) error {
// See comment on luid.AddRoute
err := luid.DeleteRoute(r.Cidr, unspecifiedNextHop(r.Cidr))
if errors.Is(err, windows.ERROR_NOT_FOUND) {
// Already gone, which is what we wanted
t.l.Info("Route was already removed", "route", r)
} else if err != nil {
if err != nil {
t.l.Error("Failed to remove route", "error", err, "route", r)
rl.Failed()
} else {
t.l.Info("Removed route", "route", r)
}
@@ -353,61 +316,6 @@ func (t *winTun) Close() error {
return t.tun.Close()
}
// systemRoutes maps each CIDR to the route that puts it in the system table. A CIDR's last entry decides, including
// one that says not to install it
func systemRoutes(routes []Route) map[netip.Prefix]Route {
out := make(map[netip.Prefix]Route, len(routes))
for _, r := range routes {
if len(r.Via) > 0 && r.Install {
out[r.Cidr] = r
} else {
delete(out, r.Cidr)
}
}
return out
}
// findRemovedSystemRoutes is the routes to delete from the system table. Windows deletes by destination and next hop,
// so only a CIDR nothing installs anymore goes, a changed metric is set on the route in place by addRoute
func findRemovedSystemRoutes(newRoutes, oldRoutes []Route) []Route {
keep := systemRoutes(newRoutes)
var removed []Route
for _, r := range systemRoutes(oldRoutes) {
if _, ok := keep[r.Cidr]; !ok {
removed = append(removed, r)
}
}
return removed
}
type routeResult int
const (
routeAdded routeResult = iota
routeMetricUpdated
routeAlreadyInstalled
)
// addRoute installs r on the interface. A reload re-adds every route to catch any the system dropped, and Windows
// refuses one it has with the same destination and next hop whatever its metric. One that is there with another
// metric, ours from before a metric change or someone else's, is brought to ours in place
func addRoute(luid winipcfg.LUID, r Route) (routeResult, error) {
nextHop := unspecifiedNextHop(r.Cidr)
err := luid.AddRoute(r.Cidr, nextHop, uint32(r.Metric))
if !errors.Is(err, windows.ERROR_OBJECT_ALREADY_EXISTS) {
return routeAdded, err
}
row, err := luid.Route(r.Cidr, nextHop)
if err != nil {
return routeAlreadyInstalled, err
}
if row.Metric != uint32(r.Metric) {
row.Metric = uint32(r.Metric)
return routeMetricUpdated, row.Set()
}
return routeAlreadyInstalled, nil
}
func unspecifiedNextHop(p netip.Prefix) netip.Addr {
if p.Addr().Is4() {
return netip.IPv4Unspecified()
-209
View File
@@ -1,209 +0,0 @@
//go:build windows && !e2e_testing
package overlay
import (
"bytes"
"fmt"
"net/netip"
"strings"
"testing"
"github.com/slackhq/nebula/config"
"github.com/slackhq/nebula/test"
"github.com/stretchr/testify/assert"
"github.com/stretchr/testify/require"
"golang.org/x/sys/windows"
"golang.zx2c4.com/wireguard/windows/tunnel/winipcfg"
)
type routeTest struct {
c *config.C
tun *winTun
luid winipcfg.LUID
log *bytes.Buffer
}
// newRouteTest makes a wintun device of its own, before installing tun.unsafe_routes from cfg
func newRouteTest(t *testing.T, cfg string) *routeTest {
t.Helper()
if !windows.GetCurrentProcessToken().IsElevated() {
t.Skip("creating a wintun device needs an elevated process")
}
if err := checkWinTunExists(); err != nil {
t.Skipf("wintun.dll is not where nebula looks for it: %v", err)
}
rt := &routeTest{log: &bytes.Buffer{}}
l := test.NewLoggerWithOutput(rt.log)
rt.c = config.NewC(l)
require.NoError(t, rt.c.LoadString(cfg))
var err error
rt.tun, err = newTun(rt.c, l, []netip.Prefix{netip.MustParsePrefix("10.250.0.1/24")}, false)
require.NoError(t, err)
t.Cleanup(func() { _ = rt.tun.Close() })
rt.luid = winipcfg.LUID(rt.tun.tun.LUID())
return rt
}
func (rt *routeTest) metric(t *testing.T, cidr string) uint32 {
t.Helper()
p := netip.MustParsePrefix(cidr)
row, err := rt.luid.Route(p, unspecifiedNextHop(p))
require.NoError(t, err)
return row.Metric
}
// reload applies cfg and expects nothing in it to fail
func (rt *routeTest) reload(t *testing.T, cfg string) {
t.Helper()
res := rt.c.ReloadConfigString(cfg)
require.NoError(t, res.Err)
assert.False(t, res.Failed, "the reload reported a failure")
}
func unsafeRoutes(routes ...string) string {
var b strings.Builder
b.WriteString("tun:\n dev: nebroutetest\n unsafe_routes:\n")
// cidr[@metric][!], the ! for install: false
for _, r := range routes {
r, noInstall := strings.CutSuffix(r, "!")
cidr, metric, _ := strings.Cut(r, "@")
fmt.Fprintf(&b, " - route: %s\n via: 10.250.0.2\n", cidr)
if metric != "" {
fmt.Fprintf(&b, " metric: %s\n", metric)
}
if noInstall {
b.WriteString(" install: false\n")
}
}
return b.String()
}
// A reload that adds a route re-adds the ones already installed, Windows refusing those as already there isn't a failure
func TestWinTun_ReloadKeepsInstalledRoutes(t *testing.T) {
forFamilies(t, func(t *testing.T, a, b string) {
rt := newRouteTest(t, unsafeRoutes(a))
require.NoError(t, rt.tun.Activate())
rt.reload(t, unsafeRoutes(a, b))
assert.NotContains(t, rt.log.String(), "Failed to add route")
rt.metric(t, a)
rt.metric(t, b)
})
}
// Windows calls a route the same by destination and next hop, so a changed metric is set on the installed route in
// place rather than deleted and added, which would leave a moment with no route
func TestWinTun_ReloadMetricChangeApplies(t *testing.T) {
forFamilies(t, func(t *testing.T, a, b string) {
rt := newRouteTest(t, unsafeRoutes(a+"@100"))
require.NoError(t, rt.tun.Activate())
require.Equal(t, uint32(100), rt.metric(t, a))
rt.reload(t, unsafeRoutes(a+"@200"))
assert.NotContains(t, rt.log.String(), "Failed to add route")
assert.NotContains(t, rt.log.String(), "Removed route")
assert.Equal(t, uint32(200), rt.metric(t, a))
})
}
// A route someone else put on the device with another metric is brought to ours, at startup too
func TestWinTun_ForeignRouteGetsOurMetric(t *testing.T) {
forFamilies(t, func(t *testing.T, a, b string) {
rt := newRouteTest(t, unsafeRoutes(a+"@100"))
p := netip.MustParsePrefix(a)
require.NoError(t, rt.luid.AddRoute(p, unspecifiedNextHop(p), 50))
require.NoError(t, rt.tun.Activate())
assert.Equal(t, uint32(100), rt.metric(t, a))
assert.Contains(t, rt.log.String(), "level=INFO msg=\"Updated route metric\"")
})
}
// A CIDR listed twice is installed once, by its last entry, and reloads leave it there instead of flipping between the
// two metrics
func TestWinTun_DuplicateCidrInstallsTheLastEntry(t *testing.T) {
forFamilies(t, func(t *testing.T, a, b string) {
rt := newRouteTest(t, unsafeRoutes(a+"@100", a+"@200"))
require.NoError(t, rt.tun.Activate())
assert.Equal(t, uint32(200), rt.metric(t, a))
rt.reload(t, unsafeRoutes(a+"@100", a+"@200", b))
assert.Equal(t, uint32(200), rt.metric(t, a))
assert.NotContains(t, rt.log.String(), "Updated route metric")
assert.NotContains(t, rt.log.String(), "Failed to add route")
})
}
// Dropping the duplicate that wasn't installed leaves the installed route alone. Windows deletes by destination and
// next hop, deleting the dropped one would take the live route with it
func TestWinTun_DroppingAnUninstalledDuplicateKeepsTheRoute(t *testing.T) {
forFamilies(t, func(t *testing.T, a, b string) {
rt := newRouteTest(t, unsafeRoutes(a+"@100", a+"@200"))
require.NoError(t, rt.tun.Activate())
rt.reload(t, unsafeRoutes(a+"@200"))
assert.NotContains(t, rt.log.String(), "Removed route")
assert.Equal(t, uint32(200), rt.metric(t, a))
})
}
// A reload ends where a fresh start with the same config would, a CIDR whose last entry says not to install it is
// removed
func TestWinTun_ReloadMatchesAFreshStart(t *testing.T) {
forFamilies(t, func(t *testing.T, a, b string) {
cidr := netip.MustParsePrefix(a)
routes := unsafeRoutes(a+"@100", a+"@100!")
fresh := newRouteTest(t, routes)
require.NoError(t, fresh.tun.Activate())
_, err := fresh.luid.Route(cidr, unspecifiedNextHop(cidr))
require.Error(t, err, "a fresh start installed it")
require.NoError(t, fresh.tun.Close())
rt := newRouteTest(t, unsafeRoutes(a+"@100"))
require.NoError(t, rt.tun.Activate())
rt.reload(t, routes)
_, err = rt.luid.Route(cidr, unspecifiedNextHop(cidr))
assert.Error(t, err, "the reload left it installed")
})
}
// Removing a route that is already gone is what we wanted, not a failure
func TestWinTun_ReloadRouteAlreadyGone(t *testing.T) {
forFamilies(t, func(t *testing.T, a, b string) {
rt := newRouteTest(t, unsafeRoutes(a, b))
require.NoError(t, rt.tun.Activate())
p := netip.MustParsePrefix(b)
require.NoError(t, rt.luid.DeleteRoute(p, unspecifiedNextHop(p)))
rt.reload(t, unsafeRoutes(a))
})
}
// A network category we can't parse would fail the restart, so it fails the reload instead of asking for one
func TestWinTun_ReloadInvalidNetworkCategoryFails(t *testing.T) {
rt := newRouteTest(t, unsafeRoutes())
for range 2 {
res := rt.c.ReloadConfigString(unsafeRoutes() + " network_category: nope\n")
require.NoError(t, res.Err)
assert.True(t, res.Failed, "a bad category that didn't change since the last reload is still bad")
assert.False(t, res.RestartRequired)
}
// Fixing it back to the running category needs nothing
res := rt.c.ReloadConfigString(unsafeRoutes() + " network_category: private\n")
require.NoError(t, res.Err)
assert.False(t, res.Failed)
assert.False(t, res.RestartRequired)
res = rt.c.ReloadConfigString(unsafeRoutes() + " network_category: public\n")
require.NoError(t, res.Err)
assert.Equal(t, []string{"tun.network_category"}, res.RestartKeys)
}
// forFamilies runs f with two unsafe_routes CIDRs of each address family, the tun's own network stays IPv4
func forFamilies(t *testing.T, f func(t *testing.T, a, b string)) {
t.Run("ipv4", func(t *testing.T) { f(t, "10.251.1.0/24", "10.251.2.0/24") })
t.Run("ipv6", func(t *testing.T) { f(t, "fd00:251:1::/64", "fd00:251:2::/64") })
}
+18 -70
View File
@@ -2,9 +2,7 @@ package nebula
import (
"crypto/fips140"
"crypto/sha256"
"encoding/binary"
"encoding/hex"
"encoding/json"
"errors"
"fmt"
@@ -52,30 +50,15 @@ type CertState struct {
myVpnBroadcastAddrsTable *bart.Lite
}
// errCertNeedsRestart marks a new cert that is refused on reload because only a restart can apply it
var errCertNeedsRestart = errors.New("a restart is required to use the new cert")
func NewPKIFromConfig(l *slog.Logger, c *config.C) (*PKI, error) {
pki := &PKI{l: l}
err := pki.reload(c, true, nil)
err := pki.reload(c, true)
if err != nil {
return nil, err
}
c.RegisterReloadCallback(func(c *config.C, r *config.Reload) {
// Compare with the running cipher, not the last config. A restart with one we can't run would fail, so say that
// now rather than ask for one, and going back to the running one after a bad reload needs no restart
if cipher := c.GetString("cipher", "aes"); !validCipher(cipher) {
l.Error("Unknown cipher, a restart with it would fail", "cipher", cipher)
r.Failed()
} else if cipher == "chachapoly" && fipsOnly() {
// newCipherSuite refuses it at startup
l.Error("ChaChaPoly is not allowed in FIPS 140-only mode, a restart with it would fail", "cipher", cipher)
r.Failed()
} else if cipher != pki.getCertState().cipher {
r.RestartRequiredIfChanged("cipher")
}
rErr := pki.reload(c, false, r)
c.RegisterReloadCallback(func(c *config.C) {
rErr := pki.reload(c, false)
if rErr != nil {
util.LogWithContextIfNeeded("Failed to reload PKI from config", rErr, l)
}
@@ -92,29 +75,13 @@ func (p *PKI) getCertState() *CertState {
return p.cs.Load()
}
// r is nil on the initial load
func (p *PKI) reload(c *config.C, initial bool, r *config.Reload) error {
before := p.cs.Load()
func (p *PKI) reload(c *config.C, initial bool) error {
err := p.reloadCerts(c, initial)
if err != nil {
if initial {
return err
}
err.Log(p.l)
if errors.Is(err, errCertNeedsRestart) {
r.RestartRequired()
} else {
r.Failed()
}
} else if !initial {
// A cert for a version we weren't running is accepted without comparing its networks to ours. The tun and the
// lighthouse keep the networks they started with
after := p.cs.Load()
if !slices.Equal(before.myVpnNetworks, after.myVpnNetworks) {
p.l.Warn("The new cert changes our networks, a restart is required to use them",
"old_networks", before.myVpnNetworks, "new_networks", after.myVpnNetworks)
r.RestartRequired()
}
}
err = p.reloadCAPool(c)
@@ -123,27 +90,21 @@ func (p *PKI) reload(c *config.C, initial bool, r *config.Reload) error {
return err
}
err.Log(p.l)
r.Failed()
}
return nil
}
// fipsOnly is fips140.Enforced, a variable so a test can run the FIPS 140-only reload check without GODEBUG
var fipsOnly = fips140.Enforced
// validCipher is true for the ciphers nebula can run. Each post-handshake CipherState in noiseutil hardcodes its own
// nonce endianness, so there's nothing to set up for either.
func validCipher(cipher string) bool {
return cipher == "aes" || cipher == "chachapoly"
}
func (p *PKI) reloadCerts(c *config.C, initial bool) *util.ContextualError {
var cipher string
var currentState *CertState
if initial {
cipher = c.GetString("cipher", "aes")
if !validCipher(cipher) {
switch cipher {
case "aes", "chachapoly":
// Each post-handshake CipherState in noiseutil hardcodes its own
// nonce endianness now, so there's nothing to set up here.
default:
return util.NewContextualError(
"unknown cipher",
m{"cipher": cipher},
@@ -171,7 +132,7 @@ func (p *PKI) reloadCerts(c *config.C, initial bool) *util.ContextualError {
return util.NewContextualError(
"Networks in new cert was different from old",
m{"new_networks": newState.v1Cert.Networks(), "old_networks": currentState.v1Cert.Networks(), "cert_version": cert.Version1},
errCertNeedsRestart,
nil,
)
}
@@ -179,7 +140,7 @@ func (p *PKI) reloadCerts(c *config.C, initial bool) *util.ContextualError {
return util.NewContextualError(
"Curve in new v1 cert was different from old",
m{"new_curve": newState.v1Cert.Curve(), "old_curve": currentState.v1Cert.Curve(), "cert_version": cert.Version1},
errCertNeedsRestart,
nil,
)
}
}
@@ -194,7 +155,7 @@ func (p *PKI) reloadCerts(c *config.C, initial bool) *util.ContextualError {
return util.NewContextualError(
"Networks in new cert was different from old",
m{"new_networks": newState.v2Cert.Networks(), "old_networks": currentState.v2Cert.Networks(), "cert_version": cert.Version2},
errCertNeedsRestart,
nil,
)
}
@@ -202,7 +163,7 @@ func (p *PKI) reloadCerts(c *config.C, initial bool) *util.ContextualError {
return util.NewContextualError(
"Curve in new cert was different from old",
m{"new_curve": newState.v2Cert.Curve(), "old_curve": currentState.v2Cert.Curve(), "cert_version": cert.Version2},
errCertNeedsRestart,
nil,
)
}
}
@@ -217,7 +178,7 @@ func (p *PKI) reloadCerts(c *config.C, initial bool) *util.ContextualError {
return util.NewContextualError(
"Removing a V2 cert is not permitted unless it has identical networks to the new V1 cert",
m{"new_v1_networks": newState.v1Cert.Networks(), "old_v2_networks": currentState.v2Cert.Networks()},
errCertNeedsRestart,
nil,
)
}
}
@@ -235,14 +196,12 @@ func (p *PKI) reloadCerts(c *config.C, initial bool) *util.ContextualError {
func (p *PKI) reloadCAPool(c *config.C) *util.ContextualError {
caPool, err := loadCAPoolFromConfig(p.l, c)
if caPool != nil {
p.caPool.Store(caPool)
p.l.Debug("Trusted CA fingerprints", "fingerprints", caPool.GetFingerprints())
}
if err != nil {
return util.NewContextualError("Failed to load ca from config", nil, err)
}
p.caPool.Store(caPool)
p.l.Debug("Trusted CA fingerprints", "fingerprints", caPool.GetFingerprints())
return nil
}
@@ -617,22 +576,11 @@ func loadCAPoolFromConfig(l *slog.Logger, c *config.C) (*cert.CAPool, error) {
bl := c.GetStringSlice("pki.blocklist", []string{})
if len(bl) > 0 {
var bad []string
for i, raw := range bl {
// Fingerprints are compared as lowercase hex strings, a malformed entry would silently block nothing
fp := strings.ToLower(strings.TrimSpace(raw))
if b, err := hex.DecodeString(fp); err != nil || len(b) != sha256.Size {
bad = append(bad, fmt.Sprintf("entry %d %q", i+1, raw))
continue
}
for _, fp := range bl {
caPool.BlocklistFingerprint(fp)
}
l.Info("Blocklisted certificates", "fingerprintCount", len(bl)-len(bad))
if len(bad) > 0 {
// The valid entries are still returned so a failed reload blocks them, startup refuses the error
return caPool, fmt.Errorf("pki.blocklist entries are not hex certificate fingerprints: %s", strings.Join(bad, ", "))
}
l.Info("Blocklisted certificates", "fingerprintCount", len(bl))
}
return caPool, nil
-168
View File
@@ -1,17 +1,10 @@
package nebula
import (
"crypto/fips140"
"fmt"
"net/netip"
"strings"
"testing"
"time"
"github.com/slackhq/nebula/cert"
"github.com/slackhq/nebula/cert_test"
"github.com/slackhq/nebula/config"
"github.com/slackhq/nebula/test"
"github.com/stretchr/testify/assert"
"github.com/stretchr/testify/require"
)
@@ -99,164 +92,3 @@ func TestNewCipherSuiteUnsupportedCurve(t *testing.T) {
assert.True(t, strings.HasPrefix(err.Error(), "unsupported curve:"), "got: %v", err)
assert.Nil(t, cs)
}
func TestPKIReloadRestartRequired(t *testing.T) {
ca, _, caKey, caPEM := cert_test.NewTestCaCert(cert.Version2, cert.Curve_CURVE25519, time.Time{}, time.Time{}, nil, nil, nil)
pkiConfig := func(cipher, network string) string {
_, _, keyPEM, certPEM := cert_test.NewTestCert(cert.Version2, cert.Curve_CURVE25519, ca, caKey, "host", time.Time{}, time.Time{}, []netip.Prefix{netip.MustParsePrefix(network)}, nil, nil)
return fmt.Sprintf("cipher: %s\npki:\n ca: %q\n cert: %q\n key: %q\n", cipher, caPEM, certPEM, keyPEM)
}
c := config.NewC(test.NewLogger())
require.NoError(t, c.LoadString(pkiConfig("aes", "10.1.0.2/24")))
p, err := NewPKIFromConfig(test.NewLogger(), c)
require.NoError(t, err)
// A cert that changes our networks is refused and needs a restart, it is not a failure
res := c.ReloadConfigString(pkiConfig("aes", "10.1.0.3/24"))
require.NoError(t, res.Err)
assert.True(t, res.RestartRequired)
assert.False(t, res.Failed)
assert.Equal(t, []netip.Prefix{netip.MustParsePrefix("10.1.0.2/24")}, p.getCertState().myVpnNetworks)
// The cipher only applies at startup
c2 := config.NewC(test.NewLogger())
require.NoError(t, c2.LoadString(pkiConfig("aes", "10.1.0.2/24")))
p, err = NewPKIFromConfig(test.NewLogger(), c2)
require.NoError(t, err)
res = c2.ReloadConfigString(pkiConfig("chachapoly", "10.1.0.2/24"))
require.NoError(t, res.Err)
assert.True(t, res.RestartRequired)
assert.Equal(t, "aes", p.getCertState().cipher)
// A cipher we can't run would fail the restart, so it fails the reload instead of asking for one
c4 := config.NewC(test.NewLogger())
require.NoError(t, c4.LoadString(pkiConfig("aes", "10.1.0.2/24")))
_, err = NewPKIFromConfig(test.NewLogger(), c4)
require.NoError(t, err)
for range 2 {
res = c4.ReloadConfigString(pkiConfig("nope", "10.1.0.2/24"))
require.NoError(t, res.Err)
assert.True(t, res.Failed, "a bad cipher that didn't change since the last reload is still bad")
assert.False(t, res.RestartRequired)
}
// Fixing it back to the running cipher needs nothing
res = c4.ReloadConfigString(pkiConfig("aes", "10.1.0.2/24"))
require.NoError(t, res.Err)
assert.False(t, res.Failed)
assert.False(t, res.RestartRequired)
// A cert that keeps our networks applies without a restart
c3 := config.NewC(test.NewLogger())
require.NoError(t, c3.LoadString(pkiConfig("aes", "10.1.0.2/24")))
_, err = NewPKIFromConfig(test.NewLogger(), c3)
require.NoError(t, err)
res = c3.ReloadConfigString(pkiConfig("aes", "10.1.0.2/24"))
require.NoError(t, res.Err)
assert.False(t, res.RestartRequired)
// A cert that can't be read is a failure, and a restart wouldn't help
res = c3.ReloadConfigString(strings.Replace(pkiConfig("aes", "10.1.0.2/24"), "cert: \"", "cert: \"garbage", 1))
require.NoError(t, res.Err)
assert.True(t, res.Failed)
assert.False(t, res.RestartRequired)
}
// A cert for a version we weren't running is accepted without comparing networks, so switching to one with different
// networks needs a restart. One with the same networks doesn't
func TestPKIReloadNewVersionWithOtherNetworks(t *testing.T) {
ca1, _, ca1Key, ca1PEM := cert_test.NewTestCaCert(cert.Version1, cert.Curve_CURVE25519, time.Time{}, time.Time{}, nil, nil, nil)
ca2, _, ca2Key, ca2PEM := cert_test.NewTestCaCert(cert.Version2, cert.Curve_CURVE25519, time.Time{}, time.Time{}, nil, nil, nil)
caPEM := string(ca1PEM) + string(ca2PEM)
pkiConfig := func(v cert.Version, network string) string {
ca, caKey := ca1, ca1Key
if v == cert.Version2 {
ca, caKey = ca2, ca2Key
}
_, _, keyPEM, certPEM := cert_test.NewTestCert(v, cert.Curve_CURVE25519, ca, caKey, "host", time.Time{}, time.Time{}, []netip.Prefix{netip.MustParsePrefix(network)}, nil, nil)
return fmt.Sprintf("pki:\n ca: %q\n cert: %q\n key: %q\n", caPEM, certPEM, keyPEM)
}
for _, tc := range []struct {
network string
restart bool
}{
{"10.9.0.7/24", true},
{"10.1.0.2/24", false},
} {
c := config.NewC(test.NewLogger())
require.NoError(t, c.LoadString(pkiConfig(cert.Version1, "10.1.0.2/24")))
p, err := NewPKIFromConfig(test.NewLogger(), c)
require.NoError(t, err)
res := c.ReloadConfigString(pkiConfig(cert.Version2, tc.network))
require.NoError(t, res.Err)
assert.False(t, res.Failed, tc.network)
assert.Equal(t, tc.restart, res.RestartRequired, tc.network)
assert.Equal(t, []netip.Prefix{netip.MustParsePrefix(tc.network)}, p.getCertState().myVpnNetworks, "accepted either way, as before")
}
}
// FIPS 140-only mode refuses chachapoly at startup, so reloading to it fails rather than asks for a restart
func TestPKIReloadChachapolyInFIPSOnlyFails(t *testing.T) {
fipsOnly = func() bool { return true }
t.Cleanup(func() { fipsOnly = fips140.Enforced })
ca, _, caKey, caPEM := cert_test.NewTestCaCert(cert.Version2, cert.Curve_P256, time.Time{}, time.Time{}, nil, nil, nil)
_, _, keyPEM, certPEM := cert_test.NewTestCert(cert.Version2, cert.Curve_P256, ca, caKey, "host", time.Time{}, time.Time{}, []netip.Prefix{netip.MustParsePrefix("10.1.0.2/24")}, nil, nil)
pkiConfig := func(cipher string) string {
return fmt.Sprintf("cipher: %s\npki:\n ca: %q\n cert: %q\n key: %q\n", cipher, caPEM, certPEM, keyPEM)
}
c := config.NewC(test.NewLogger())
require.NoError(t, c.LoadString(pkiConfig("aes")))
_, err := NewPKIFromConfig(test.NewLogger(), c)
require.NoError(t, err)
res := c.ReloadConfigString(pkiConfig("chachapoly"))
require.NoError(t, res.Err)
assert.True(t, res.Failed)
assert.False(t, res.RestartRequired)
}
func TestLoadCAPoolBlocklist(t *testing.T) {
ca, _, caKey, caPEM := cert_test.NewTestCaCert(cert.Version2, cert.Curve_CURVE25519, time.Time{}, time.Time{}, nil, nil, nil)
crt, _, _, _ := cert_test.NewTestCert(cert.Version2, cert.Curve_CURVE25519, ca, caKey, "host", time.Time{}, time.Time{}, []netip.Prefix{netip.MustParsePrefix("10.1.0.2/24")}, nil, nil)
fp, err := crt.Fingerprint()
require.NoError(t, err)
load := func(entry string) (*cert.CAPool, error) {
c := config.NewC(test.NewLogger())
require.NoError(t, c.LoadString(fmt.Sprintf("pki:\n ca: %q\n blocklist:\n - %q\n", caPEM, entry)))
return loadCAPoolFromConfig(test.NewLogger(), c)
}
for _, entry := range []string{fp, strings.ToUpper(fp), " " + fp + "\t"} {
pool, err := load(entry)
require.NoError(t, err, entry)
assert.True(t, pool.IsBlocklisted(fp), entry)
}
for _, entry := range []string{fp[1:], fp + "00", "sha256:" + fp, "zz" + fp[2:], ""} {
_, err := load(entry)
require.Error(t, err, entry)
}
// A bad entry on reload fails it, the valid entries are still blocked
_, _, keyPEM, certPEM := cert_test.NewTestCert(cert.Version2, cert.Curve_CURVE25519, ca, caKey, "me", time.Time{}, time.Time{}, []netip.Prefix{netip.MustParsePrefix("10.1.0.1/24")}, nil, nil)
pkiConfig := func(entry string) string {
return fmt.Sprintf("pki:\n ca: %q\n cert: %q\n key: %q\n blocklist:\n - %q\n", caPEM, certPEM, keyPEM, entry)
}
c := config.NewC(test.NewLogger())
require.NoError(t, c.LoadString(pkiConfig(fp)))
p, err := NewPKIFromConfig(test.NewLogger(), c)
require.NoError(t, err)
other, _, _, _ := cert_test.NewTestCert(cert.Version2, cert.Curve_CURVE25519, ca, caKey, "other", time.Time{}, time.Time{}, []netip.Prefix{netip.MustParsePrefix("10.1.0.3/24")}, nil, nil)
otherFp, err := other.Fingerprint()
require.NoError(t, err)
res := c.ReloadConfigString(pkiConfig(fp) + fmt.Sprintf(" - %q\n - %q\n", otherFp, fp[1:]))
assert.True(t, res.Failed)
assert.True(t, p.GetCAPool().IsBlocklisted(fp))
assert.True(t, p.GetCAPool().IsBlocklisted(otherFp))
}
+1 -2
View File
@@ -67,8 +67,7 @@ func NewPunchyFromConfig(l *slog.Logger, c *config.C, punchConn udp.Conn) *Punch
}
p.reload(c, true)
c.RegisterReloadCallback(func(c *config.C, r *config.Reload) {
r.RestartRequiredIfChanged("stats.lighthouse_metrics")
c.RegisterReloadCallback(func(c *config.C) {
p.reload(c, false)
})
+6 -16
View File
@@ -76,7 +76,7 @@ punchy:
punch: true
delay: 10m
respond: true
`).Err)
`))
p.reload(c, false)
assert.True(t, p.punch.Load())
assert.Equal(t, newDelay, time.Duration(p.delay.Load()))
@@ -170,7 +170,7 @@ func TestPunchy_LogFormat_ReloadPunch(t *testing.T) {
NewPunchyFromConfig(l, c, nil)
hook.entries = nil
require.NoError(t, c.ReloadConfigString(`punchy: {punch: true}`).Err)
require.NoError(t, c.ReloadConfigString(`punchy: {punch: true}`))
entry := findEntry(t, hook.entries, "punchy.punch changed")
assert.Equal(t, slog.LevelInfo, entry.Level)
@@ -184,7 +184,7 @@ func TestPunchy_LogFormat_ReloadRespond(t *testing.T) {
NewPunchyFromConfig(l, c, nil)
hook.entries = nil
require.NoError(t, c.ReloadConfigString(`punchy: {respond: true}`).Err)
require.NoError(t, c.ReloadConfigString(`punchy: {respond: true}`))
entry := findEntry(t, hook.entries, "punchy.respond changed")
assert.Equal(t, slog.LevelInfo, entry.Level)
@@ -198,7 +198,7 @@ func TestPunchy_LogFormat_ReloadDelay(t *testing.T) {
NewPunchyFromConfig(l, c, nil)
hook.entries = nil
require.NoError(t, c.ReloadConfigString(`punchy: {delay: 10s}`).Err)
require.NoError(t, c.ReloadConfigString(`punchy: {delay: 10s}`))
entry := findEntry(t, hook.entries, "punchy.delay changed")
assert.Equal(t, slog.LevelInfo, entry.Level)
@@ -212,7 +212,7 @@ func TestPunchy_LogFormat_ReloadTargetAllRemotes(t *testing.T) {
NewPunchyFromConfig(l, c, nil)
hook.entries = nil
require.NoError(t, c.ReloadConfigString(`punchy: {target_all_remotes: true}`).Err)
require.NoError(t, c.ReloadConfigString(`punchy: {target_all_remotes: true}`))
entry := findEntry(t, hook.entries, "punchy.target_all_remotes changed")
assert.Equal(t, slog.LevelInfo, entry.Level)
@@ -226,19 +226,9 @@ func TestPunchy_LogFormat_ReloadRespondDelay(t *testing.T) {
NewPunchyFromConfig(l, c, nil)
hook.entries = nil
require.NoError(t, c.ReloadConfigString(`punchy: {respond_delay: 15s}`).Err)
require.NoError(t, c.ReloadConfigString(`punchy: {respond_delay: 15s}`))
entry := findEntry(t, hook.entries, "punchy.respond_delay changed")
assert.Equal(t, slog.LevelInfo, entry.Level)
assert.Equal(t, map[string]any{"respond_delay": 15 * time.Second}, entry.Attrs)
}
func TestPunchyReloadRestartRequired(t *testing.T) {
c := config.NewC(test.NewLogger())
require.NoError(t, c.LoadString("stats:\n lighthouse_metrics: false\n"))
NewPunchyFromConfig(test.NewLogger(), c, nil)
res := c.ReloadConfigString("stats:\n lighthouse_metrics: true\n")
require.NoError(t, res.Err)
assert.True(t, res.RestartRequired)
}
-91
View File
@@ -1,91 +0,0 @@
package ratelimit
import (
"fmt"
"math"
"sync/atomic"
"time"
)
// Limiter is a token bucket: `burst` calls are allowed at once, then one more per `every`.
// It counts the calls it denies and hands that count to the next allowed call.
//
// The budget belongs to the Limiter instance.
// Every Allow that returns true spends from it, whatever the caller then does.
//
// Time follows Go's monotonic clock.
//
// Create one Limiter for each thing you want to limit,
// sharing one between unrelated events lets the noisy one starve the quiet one.
//
// Check Allow before doing the work being limited, so a denied call stays cheap:
//
// if denied, ok := probeLimiter.Allow(); ok {
// sendProbe()
// probesDenied.Inc(int64(denied))
// }
//
// For log lines use logging.RateLimited, which attaches the denied count to the logger as "suppressed".
type Limiter struct {
every int64
slack int64
tat atomic.Int64
denied atomic.Uint64
}
// maxSpan bounds `burst` * `every` to half of int64, leaving the other half for process uptime so the bucket
// math can't overflow.
const maxSpan = math.MaxInt64 / 2
// New returns a Limiter allowing `burst` calls at once and one more per `every`.
// A `burst` under 1 is 1, and an `every` of 0 or less never limits.
// It returns an error if `burst` * `every` is over about 146 years.
func New(burst int, every time.Duration) (*Limiter, error) {
l := &Limiter{}
if every > 0 {
burst = max(burst, 1)
if int64(burst) > maxSpan/int64(every) {
return nil, fmt.Errorf("ratelimit: burst %d * every %v is too long", burst, every)
}
l.every = int64(every)
l.slack = int64(burst-1) * l.every
}
return l, nil
}
var monoStart = time.Now()
func monoNow() int64 { return int64(time.Since(monoStart)) }
// Allow reports whether this call is allowed.
// If a token is available it spends it and returns the calls denied since the last allowed one, and true.
// Otherwise it returns 0 and false, and counts the denial.
// A nil Limiter allows everything.
func (l *Limiter) Allow() (uint64, bool) {
if l == nil {
return 0, true
}
return l.allow(monoNow())
}
// allow is Allow at a given monotonic time.
func (l *Limiter) allow(now int64) (uint64, bool) {
// Concurrent Allow calls read the clock before racing for the bucket, so one can see a time another already spent
// past and be denied. An unlimited Limiter must never deny, so it skips the bucket.
if l.every == 0 {
return 0, true
}
for {
tat := l.tat.Load()
next := max(tat, now)
if next-now > l.slack {
l.denied.Add(1)
return 0, false
}
if l.tat.CompareAndSwap(tat, next+l.every) {
return l.denied.Swap(0), true
}
}
}
-264
View File
@@ -1,264 +0,0 @@
package ratelimit
import (
"math"
"sync"
"sync/atomic"
"testing"
"time"
)
func mustLimiter(t testing.TB, burst int, every time.Duration) *Limiter {
t.Helper()
l, err := New(burst, every)
if err != nil {
t.Fatal(err)
}
return l
}
func TestLimiterBurstAndRefill(t *testing.T) {
l, now := mustLimiter(t, 3, time.Second), int64(0)
for i := 0; i < 3; i++ {
if n, ok := l.allow(now); !ok || n != 0 {
t.Fatalf("burst line %d: ok=%v denied=%d", i, ok, n)
}
}
for i := 0; i < 5; i++ {
if _, ok := l.allow(now); ok {
t.Fatalf("line %d past the burst logged", i)
}
}
now += int64(time.Second)
if n, ok := l.allow(now); !ok || n != 5 {
t.Fatalf("after one refill: ok=%v denied=%d, want true 5", ok, n)
}
if _, ok := l.allow(now); ok {
t.Fatal("one refill earned more than one line")
}
// A long quiet spell refills to burst, not past it, and the count reported above does not carry over.
now += int64(time.Hour)
for i, want := range []uint64{1, 0, 0} {
if n, ok := l.allow(now); !ok || n != want {
t.Fatalf("refilled line %d: ok=%v denied=%d, want true %d", i, ok, n, want)
}
}
if _, ok := l.allow(now); ok {
t.Fatal("bucket refilled past burst")
}
}
func TestLimiterBounds(t *testing.T) {
for _, every := range []time.Duration{0, -time.Second} {
l := mustLimiter(t, 1, every)
for i := 0; i < 100; i++ {
if _, ok := l.allow(0); !ok {
t.Fatalf("every=%v limited line %d", every, i)
}
}
}
l := mustLimiter(t, 0, time.Second)
if _, ok := l.allow(0); !ok {
t.Fatal("burst 0 should allow one line")
}
if _, ok := l.allow(0); ok {
t.Fatal("burst 0 should allow only one line")
}
}
func TestLimiterOverflow(t *testing.T) {
for _, c := range []struct {
burst int
every time.Duration
}{
{math.MaxInt, time.Second},
{1, math.MaxInt64},
{2, maxSpan/2 + 1},
} {
if _, err := New(c.burst, c.every); err == nil {
t.Fatalf("burst %d every %d should not fit", c.burst, c.every)
}
}
l := mustLimiter(t, 2, maxSpan/2)
for i := 0; i < 2; i++ {
if _, ok := l.allow(0); !ok {
t.Fatalf("the largest span should allow its burst, denied call %d", i)
}
}
if _, ok := l.allow(0); ok {
t.Fatal("the largest span allowed past its burst")
}
}
// Concurrent callers read the clock at slightly different times, which must not limit a Limiter that never limits.
func TestLimiterUnlimitedConcurrent(t *testing.T) {
l := mustLimiter(t, 1, 0)
var denied atomic.Int64
var wg sync.WaitGroup
for i := 0; i < 16; i++ {
wg.Add(1)
go func() {
defer wg.Done()
for j := 0; j < 10000; j++ {
if _, ok := l.Allow(); !ok {
denied.Add(1)
}
}
}()
}
wg.Wait()
if got := denied.Load(); got != 0 {
t.Fatalf("denied %d lines", got)
}
}
func TestLimiterNil(t *testing.T) {
var l *Limiter
for i := 0; i < 10; i++ {
if _, ok := l.Allow(); !ok {
t.Fatal("nil limiter limited")
}
}
}
func TestLimiterConcurrent(t *testing.T) {
l := mustLimiter(t, 10, time.Hour)
var allowed atomic.Int64
var reported atomic.Uint64
var wg sync.WaitGroup
for i := 0; i < 16; i++ {
wg.Add(1)
go func() {
defer wg.Done()
for j := 0; j < 1000; j++ {
if n, ok := l.allow(0); ok {
allowed.Add(1)
reported.Add(n)
}
}
}()
}
wg.Wait()
if got := allowed.Load(); got != 10 {
t.Fatalf("allowed %d lines, want the burst of 10", got)
}
// An allowed call that lands after some denials reports them, so the rest are still pending.
if got := reported.Load() + l.denied.Load(); got != 16*1000-10 {
t.Fatalf("denied %d, want %d", got, 16*1000-10)
}
}
func BenchmarkAllowAllowed(b *testing.B) {
l := mustLimiter(b, 1, time.Nanosecond)
b.ReportAllocs()
for i := 0; i < b.N; i++ {
l.tat.Store(0)
l.Allow()
}
}
func BenchmarkAllowDenied(b *testing.B) {
l := mustLimiter(b, 1, time.Hour)
l.Allow()
b.ReportAllocs()
for i := 0; i < b.N; i++ {
l.Allow()
}
}
func BenchmarkAllowDeniedParallel(b *testing.B) {
l := mustLimiter(b, 1, time.Hour)
l.Allow()
b.ReportAllocs()
b.RunParallel(func(pb *testing.PB) {
for pb.Next() {
l.Allow()
}
})
}
// FuzzLimiter checks the bucket against its exact definition over arbitrary call timings.
// A call is denied if and only if some allowed call a would leave too many calls for the time since a:
// (allowed calls since a, plus this one) * every > burst * every + (now - a).
// Every denied call must also be reported exactly once, by a later allowed call or still pending.
func FuzzLimiter(f *testing.F) {
f.Add(uint8(3), uint16(1000), []byte{0, 0, 0, 0, 16, 0, 0, 200, 1, 1, 1, 15, 17, 0})
f.Add(uint8(1), uint16(1), []byte{0, 16, 15, 16, 0, 255, 0, 0})
f.Fuzz(func(t *testing.T, burst uint8, everyUs uint16, steps []byte) {
if len(steps) > 512 {
steps = steps[:512]
}
b := int64(burst%16) + 1
every := int64(everyUs%1000+1) * int64(time.Microsecond)
l := mustLimiter(t, int(b), time.Duration(every))
var now int64
var allowedAt []int64
var denied, reported uint64
for _, s := range steps {
// Each step advances by a sixteenth of every, so timings land on and around the refill.
now += int64(s) * every / 16
over := false
for i, a := range allowedAt {
if int64(len(allowedAt)-i+1)*every > b*every+now-a {
over = true
break
}
}
n, ok := l.allow(now)
if ok == over {
t.Fatalf("at %d with %d allowed before: ok=%v, the definition says %v", now, len(allowedAt), ok, !over)
}
if !ok {
denied++
continue
}
reported += n
allowedAt = append(allowedAt, now)
}
if got := reported + l.denied.Load(); got != denied {
t.Fatalf("reported %d denied calls, made %d", got, denied)
}
})
}
// Concurrent callers on the real clock must account for every denied call exactly once.
func TestLimiterDeniedConservedConcurrent(t *testing.T) {
l := mustLimiter(t, 4, time.Microsecond)
var denied, reported atomic.Uint64
var wg sync.WaitGroup
for i := 0; i < 16; i++ {
wg.Add(1)
go func() {
defer wg.Done()
for j := 0; j < 20000; j++ {
if n, ok := l.Allow(); ok {
reported.Add(n)
} else {
denied.Add(1)
}
}
}()
}
wg.Wait()
if denied.Load() == 0 {
t.Fatal("nothing was denied, the test proves nothing")
}
if got := reported.Load() + l.denied.Load(); got != denied.Load() {
t.Fatalf("reported %d denied calls, made %d", got, denied.Load())
}
}
+1 -2
View File
@@ -28,11 +28,10 @@ func NewRelayManager(ctx context.Context, l *slog.Logger, hostmap *HostMap, c *c
hostmap: hostmap,
}
rm.reload(c, true)
c.RegisterReloadCallback(func(c *config.C, r *config.Reload) {
c.RegisterReloadCallback(func(c *config.C) {
err := rm.reload(c, false)
if err != nil {
rm.l.Error("Failed to reload relay_manager", "error", err)
r.Failed()
}
})
return rm
+10 -27
View File
@@ -1,8 +1,8 @@
package service
import (
"io"
"net"
"sync"
)
type tcpListener struct {
@@ -10,40 +10,23 @@ type tcpListener struct {
s *Service
addr *net.TCPAddr
accept chan net.Conn
// closed is closed instead of accept so a handler blocked handing off a
// connection can't send on a closed channel.
closed chan struct{}
closeOnce sync.Once
}
func (l *tcpListener) Accept() (net.Conn, error) {
// select picks randomly among ready cases, so without this a handler still
// waiting to hand off could win over closed after Close has returned.
select {
case <-l.closed:
return nil, net.ErrClosed
default:
}
select {
case conn := <-l.accept:
return conn, nil
case <-l.closed:
return nil, net.ErrClosed
conn, ok := <-l.accept
if !ok {
return nil, io.EOF
}
return conn, nil
}
func (l *tcpListener) Close() error {
l.closeOnce.Do(func() {
// Close before leaving the map so a concurrent closeListeners that
// no longer sees this listener knows Accept is already released.
close(l.closed)
l.s.mu.Lock()
defer l.s.mu.Unlock()
delete(l.s.mu.listeners, uint16(l.addr.Port))
close(l.accept)
l.s.mu.Lock()
delete(l.s.mu.listeners, l.port)
l.s.mu.Unlock()
})
return nil
}
+10 -79
View File
@@ -32,18 +32,13 @@ import (
const nicID = 1
type Service struct {
eg *errgroup.Group
control *nebula.Control
ipstack *stack.Stack
// done is closed once the forwarding goroutines have exited and the
// netstack is torn down, at which point err holds the first fatal error.
done chan struct{}
err error
mu struct {
sync.Mutex
closed bool
listeners map[uint16]*tcpListener
}
}
@@ -70,6 +65,7 @@ func New(control *nebula.Control) (_ *Service, reterr error) {
ctx := control.Context()
eg, ctx := errgroup.WithContext(ctx)
s := Service{
eg: eg,
control: control,
}
s.mu.listeners = map[uint16]*tcpListener{}
@@ -78,12 +74,6 @@ func New(control *nebula.Control) (_ *Service, reterr error) {
NetworkProtocols: []stack.NetworkProtocolFactory{ipv4.NewProtocol, ipv6.NewProtocol},
TransportProtocols: []stack.TransportProtocolFactory{tcp.NewProtocol, udp.NewProtocol, icmp.NewProtocol4, icmp.NewProtocol6},
})
// The teardown goroutine only owns the stack once New succeeds
defer func() {
if reterr != nil {
s.ipstack.Destroy()
}
}()
sackEnabledOpt := tcpip.TCPSACKEnabled(true) // TCP SACK is disabled by default
tcpipErr := s.ipstack.SetTransportProtocolOption(tcp.ProtocolNumber, &sackEnabledOpt)
if tcpipErr != nil {
@@ -133,12 +123,6 @@ func New(control *nebula.Control) (_ *Service, reterr error) {
// this will read exactly one packet
n, err := reader.Read(buf)
if err != nil {
// An error after shutdown began is noise from the device pipes
// closing, anything else is fatal and must stop nebula too
if ctx.Err() != nil {
return nil
}
s.control.Stop()
return err
}
packetBuf := stack.NewPacketBuffer(stack.PacketBufferOptions{
@@ -146,8 +130,8 @@ func New(control *nebula.Control) (_ *Service, reterr error) {
})
linkEP.InjectInbound(header.IPv4ProtocolNumber, packetBuf)
if ctx.Err() != nil {
return nil
if err := ctx.Err(); err != nil {
return err
}
}
})
@@ -155,18 +139,13 @@ func New(control *nebula.Control) (_ *Service, reterr error) {
for {
packet := linkEP.ReadContext(ctx)
if packet == nil {
if ctx.Err() != nil {
return nil
if err := ctx.Err(); err != nil {
return err
}
continue
}
bufView := packet.ToView()
if _, err := bufView.WriteTo(writer); err != nil {
// Same shutdown noise handling as the inbound reader
if ctx.Err() != nil {
return nil
}
s.control.Stop()
return err
}
bufView.Release()
@@ -179,22 +158,6 @@ func New(control *nebula.Control) (_ *Service, reterr error) {
return control.Wait()
})
// Tear down here rather than in Close so it also happens when nebula stops
// on its own. The forwarding goroutines must exit before the stack they feed
// is destroyed.
s.done = make(chan struct{})
go func() {
s.err = eg.Wait()
s.closeListeners()
// Destroy aborts the endpoints that exist when it starts, then waits on
// every endpoint, so a Dial registering in between would hold Wait until
// its connect timed out. Without the NIC new dials fail route lookup.
// RemoveNIC also closes linkEP.
_ = s.ipstack.RemoveNIC(nicID)
s.ipstack.Destroy()
close(s.done)
}()
return &s, nil
}
@@ -268,15 +231,11 @@ func (s *Service) Listen(network, address string) (net.Listener, error) {
s: s,
addr: addr,
accept: make(chan net.Conn),
closed: make(chan struct{}),
}
s.mu.Lock()
defer s.mu.Unlock()
if s.mu.closed {
return nil, net.ErrClosed
}
if _, ok := s.mu.listeners[port]; ok {
return nil, fmt.Errorf("already listening on port %d", port)
}
@@ -285,44 +244,22 @@ func (s *Service) Listen(network, address string) (net.Listener, error) {
return l, nil
}
// Wait blocks until the service has fully stopped, either via Close or a fatal
// error, and returns the first fatal error if there was one.
func (s *Service) Wait() error {
<-s.done
return s.err
return s.eg.Wait()
}
// Close closes all listeners and stops nebula. Use Wait to block until
// shutdown has completed.
func (s *Service) Close() error {
s.closeListeners()
s.control.Stop()
return nil
}
// closeListeners unblocks pending Accept calls and rejects new listeners.
func (s *Service) closeListeners() {
// Every caller closes every listener rather than returning early once
// closed is set, so none returns while another is still closing them.
s.mu.Lock()
s.mu.closed = true
listeners := make([]*tcpListener, 0, len(s.mu.listeners))
for _, l := range s.mu.listeners {
listeners = append(listeners, l)
}
s.mu.Unlock()
for _, l := range listeners {
_ = l.Close()
}
}
func (s *Service) tcpHandler(r *tcp.ForwarderRequest) {
endpointID := r.ID()
s.mu.Lock()
defer s.mu.Unlock()
l, ok := s.mu.listeners[endpointID.LocalPort]
s.mu.Unlock()
if !ok {
r.Complete(true)
return
@@ -338,12 +275,6 @@ func (s *Service) tcpHandler(r *tcp.ForwarderRequest) {
r.Complete(false)
ep.SocketOptions().SetKeepAlive(true)
// The handoff blocks until Accept is called, so it must not hold s.mu or a
// listener nobody accepts from stalls every other port.
conn := gonet.NewTCPConn(&wq, ep)
select {
case l.accept <- conn:
case <-l.closed:
_ = conn.Close()
}
l.accept <- conn
}
-298
View File
@@ -188,301 +188,3 @@ func TestService(t *testing.T) {
t.Fatal(err)
}
}
// A listener that is never accepted from must not stall connections to other
// ports, and closing it must not block.
func TestServiceUnacceptedListener(t *testing.T) {
lighthousePort := ephemeralUDPPort(t)
ca, _, caKey, _ := cert_test.NewTestCaCert(cert.Version2, cert.Curve_CURVE25519, time.Now(), time.Now().Add(10*time.Minute), nil, nil, []string{})
a := newSimpleService(ca, caKey, "a", netip.MustParseAddr("10.0.0.1"), m{
"static_host_map": m{},
"lighthouse": m{
"am_lighthouse": true,
},
"listen": m{
"host": "0.0.0.0",
"port": lighthousePort,
},
})
t.Cleanup(func() { _ = a.Close() })
b := newSimpleService(ca, caKey, "b", netip.MustParseAddr("10.0.0.2"), m{
"static_host_map": m{
"10.0.0.1": []string{fmt.Sprintf("127.0.0.1:%d", lighthousePort)},
},
"lighthouse": m{
"hosts": []string{"10.0.0.1"},
"interval": 1,
},
})
t.Cleanup(func() { _ = b.Close() })
idle, err := a.Listen("tcp", ":1234")
if err != nil {
t.Fatal(err)
}
active, err := a.Listen("tcp", ":1235")
if err != nil {
t.Fatal(err)
}
ctx, cancel := context.WithTimeout(context.Background(), 10*time.Second)
defer cancel()
idleConn, err := b.DialContext(ctx, "tcp", "10.0.0.1:1234")
if err != nil {
t.Fatal(err)
}
defer idleConn.Close()
accepted := make(chan error, 1)
go func() {
conn, err := active.Accept()
if err == nil {
err = conn.Close()
}
accepted <- err
}()
ctx, cancel = context.WithTimeout(context.Background(), 5*time.Second)
defer cancel()
activeConn, err := b.DialContext(ctx, "tcp", "10.0.0.1:1235")
if err != nil {
t.Fatalf("dial to accepted port stalled behind idle listener: %v", err)
}
defer activeConn.Close()
select {
case err := <-accepted:
if err != nil {
t.Fatal(err)
}
case <-time.After(5 * time.Second):
t.Fatal("accept stalled behind idle listener")
}
closed := make(chan error, 1)
go func() { closed <- idle.Close() }()
select {
case err := <-closed:
if err != nil {
t.Fatal(err)
}
case <-time.After(5 * time.Second):
t.Fatal("closing idle listener blocked")
}
if _, err := idle.Accept(); !errors.Is(err, net.ErrClosed) {
t.Fatalf("expected net.ErrClosed from closed listener, got %v", err)
}
if err := idle.Close(); err != nil {
t.Fatalf("second close: %v", err)
}
}
// Accept must report net.ErrClosed after Close even while a handler is still
// trying to hand off a connection.
func TestListenerAcceptAfterClose(t *testing.T) {
s := &Service{}
s.mu.listeners = map[uint16]*tcpListener{}
l := &tcpListener{
port: 1234,
s: s,
accept: make(chan net.Conn),
closed: make(chan struct{}),
}
s.mu.listeners[l.port] = l
if err := l.Close(); err != nil {
t.Fatal(err)
}
// Keep a send pending so every Accept has a connection ready alongside closed.
stop := make(chan struct{})
done := make(chan struct{})
go func() {
defer close(done)
for {
server, client := net.Pipe()
_ = client.Close()
select {
case l.accept <- server:
case <-stop:
_ = server.Close()
return
}
}
}()
defer func() {
close(stop)
<-done
}()
for range 100 {
time.Sleep(time.Millisecond)
conn, err := l.Accept()
if conn != nil {
_ = conn.Close()
}
if !errors.Is(err, net.ErrClosed) {
t.Fatalf("Accept after Close: got err %v, want net.ErrClosed", err)
}
}
}
// Close must release blocked Accept calls and let Wait report a clean shutdown.
func TestServiceClose(t *testing.T) {
ca, _, caKey, _ := cert_test.NewTestCaCert(cert.Version2, cert.Curve_CURVE25519, time.Now(), time.Now().Add(10*time.Minute), nil, nil, []string{})
a := newSimpleService(ca, caKey, "a", netip.MustParseAddr("10.0.0.1"), m{
"static_host_map": m{},
"listen": m{
"host": "127.0.0.1",
"port": 0,
},
})
ln, err := a.Listen("tcp", ":1234")
if err != nil {
t.Fatal(err)
}
accepted := make(chan error, 1)
go func() {
_, err := ln.Accept()
accepted <- err
}()
if err := a.Close(); err != nil {
t.Fatal(err)
}
select {
case err := <-accepted:
if !errors.Is(err, net.ErrClosed) {
t.Fatalf("expected net.ErrClosed from Accept, got %v", err)
}
case <-time.After(5 * time.Second):
t.Fatal("Accept still blocked after Close")
}
waited := make(chan error, 1)
go func() { waited <- a.Wait() }()
select {
case err := <-waited:
if err != nil {
t.Fatalf("expected clean shutdown from Wait, got %v", err)
}
case <-time.After(5 * time.Second):
t.Fatal("Wait still blocked after Close")
}
if a.ipstack.HasNIC(nicID) {
t.Fatal("netstack not torn down after Wait")
}
if err := a.Close(); err != nil {
t.Fatalf("second close: %v", err)
}
if _, err := a.Listen("tcp", ":1235"); !errors.Is(err, net.ErrClosed) {
t.Fatalf("expected net.ErrClosed from Listen after Close, got %v", err)
}
}
// If nebula stops without Close being called, the service must still release
// Accept and tear down the netstack.
func TestServiceNebulaStopped(t *testing.T) {
ca, _, caKey, _ := cert_test.NewTestCaCert(cert.Version2, cert.Curve_CURVE25519, time.Now(), time.Now().Add(10*time.Minute), nil, nil, []string{})
a := newSimpleService(ca, caKey, "a", netip.MustParseAddr("10.0.0.1"), m{
"static_host_map": m{},
"listen": m{
"host": "127.0.0.1",
"port": 0,
},
})
ln, err := a.Listen("tcp", ":1234")
if err != nil {
t.Fatal(err)
}
accepted := make(chan error, 1)
go func() {
_, err := ln.Accept()
accepted <- err
}()
a.control.Stop()
waited := make(chan error, 1)
go func() { waited <- a.Wait() }()
select {
case err := <-waited:
if err != nil {
t.Fatalf("expected clean shutdown from Wait, got %v", err)
}
case <-time.After(5 * time.Second):
t.Fatal("Wait still blocked after nebula stopped")
}
select {
case err := <-accepted:
if !errors.Is(err, net.ErrClosed) {
t.Fatalf("expected net.ErrClosed from Accept, got %v", err)
}
case <-time.After(5 * time.Second):
t.Fatal("Accept still blocked after nebula stopped")
}
if a.ipstack.HasNIC(nicID) {
t.Fatal("netstack not torn down after Wait")
}
}
// Dials racing Close must not hold Wait until their connect times out.
func TestServiceDialDuringClose(t *testing.T) {
ca, _, caKey, _ := cert_test.NewTestCaCert(cert.Version2, cert.Curve_CURVE25519, time.Now(), time.Now().Add(10*time.Minute), nil, nil, []string{})
a := newSimpleService(ca, caKey, "a", netip.MustParseAddr("10.0.0.1"), m{
"static_host_map": m{},
"listen": m{
"host": "127.0.0.1",
"port": 0,
},
})
stop := make(chan struct{})
var eg errgroup.Group
for range 8 {
eg.Go(func() error {
for {
select {
case <-stop:
return nil
default:
}
// 10.0.0.2 has no tunnel, so each dial sits in SYN-SENT until aborted
if c, err := a.Dial("tcp", "10.0.0.2:80"); err == nil {
_ = c.Close()
}
}
})
}
time.Sleep(50 * time.Millisecond)
if err := a.Close(); err != nil {
t.Fatal(err)
}
waited := make(chan error, 1)
go func() { waited <- a.Wait() }()
select {
case err := <-waited:
if err != nil {
t.Fatalf("expected clean shutdown from Wait, got %v", err)
}
case <-time.After(5 * time.Second):
t.Fatal("Wait blocked behind a dial that raced Close")
}
close(stop)
dialersDone := make(chan error, 1)
go func() { dialersDone <- eg.Wait() }()
select {
case <-dialersDone:
case <-time.After(5 * time.Second):
t.Fatal("Dial still blocked after Wait")
}
}
+921 -50
View File
File diff suppressed because it is too large. Load diff
-57
View File
@@ -1,57 +0,0 @@
package nebula
import (
"bytes"
"fmt"
"path/filepath"
"strings"
"testing"
"github.com/slackhq/nebula/commands"
"github.com/slackhq/nebula/config"
"github.com/slackhq/nebula/test"
)
// TestSSHCommandSurface is a characterization test for the ssh command surface.
// It pins the registered command set, their descriptions, help text and flag definitions
// so that moving the registry to a transport neutral package is provably a relocation
// rather than a rewrite. Regenerate with `go test . -run TestSSHCommandSurface -update`.
func TestSSHCommandSurface(t *testing.T) {
got := renderCommandSurface(registeredCommands(t).All())
test.Golden(t, filepath.Join("testdata", "ssh_commands.golden"), got)
}
// registeredCommands returns a registry holding every command nebula serves. The
// Interface is never dereferenced: attachCommands only closes over it.
func registeredCommands(t *testing.T) *commands.Registry {
t.Helper()
l := test.NewLogger()
reg := commands.New()
attachCommands(l, config.NewC(l), reg, &Interface{})
return reg
}
func renderCommandSurface(cmds []*commands.Command) string {
lines := make([]string, 0, len(cmds))
for _, cmd := range cmds {
b := &bytes.Buffer{}
fmt.Fprintf(b, "%s\n", cmd.Name)
fmt.Fprintf(b, " short: %s\n", cmd.ShortDescription)
fmt.Fprintf(b, " help: %s\n", cmd.Help)
if cmd.Flags != nil {
fl, _ := cmd.Flags()
if fl != nil {
fb := &bytes.Buffer{}
fl.SetOutput(fb)
fl.PrintDefaults()
fmt.Fprintf(b, " flags:\n%s", fb.String())
}
}
lines = append(lines, b.String())
}
// In the order All gives, so the golden pins display order too.
return strings.Join(lines, "")
}
-94
View File
@@ -1,94 +0,0 @@
package nebula
import (
"errors"
"io"
"os"
"path/filepath"
"testing"
"github.com/slackhq/nebula/commands"
"github.com/slackhq/nebula/config"
"github.com/slackhq/nebula/test"
"github.com/stretchr/testify/assert"
"github.com/stretchr/testify/require"
)
type lineWriter struct {
lines []string
err error
}
func (w *lineWriter) WriteLine(s string) error {
w.lines = append(w.lines, s)
return w.err
}
func (w *lineWriter) Write(s string) error { return w.WriteLine(s) }
func (w *lineWriter) WriteBytes(b []byte) error { return w.WriteLine(string(b)) }
func (w *lineWriter) GetWriter() io.Writer { return io.Discard }
func TestReloadCommandReportsTheResult(t *testing.T) {
dir := t.TempDir()
write := func(body string) {
require.NoError(t, os.WriteFile(filepath.Join(dir, "config.yml"), []byte(body), 0o600))
}
write("a: 1\nb: 1")
l := test.NewLogger()
c := config.NewC(l)
require.NoError(t, c.Load(dir))
fail := false
c.RegisterReloadCallback(func(c *config.C, r *config.Reload) {
r.RestartRequiredIfChanged("b")
if fail {
r.Failed()
}
})
// reload returns what the client was told. A reload that failed is a commands.Failure
// to the surface, exit 1 over ssh, with the result line as its message; one that
// merely needs a restart is not.
reload := func(failed bool) []string {
w := &lineWriter{}
err := reloadCommand(l, c, w)
if failed {
var f *commands.Failure
require.ErrorAs(t, err, &f)
assert.Equal(t, w.lines[len(w.lines)-1], f.Msg)
} else {
require.NoError(t, err)
}
return w.lines
}
write("a: 2\nb: 1")
assert.Equal(t, []string{"Reloading config", "Config reload complete"}, reload(false))
fail = true
write("a: 3\nb: 1")
assert.Equal(t, []string{"Reloading config", "Config reload completed with errors, review the logs"}, reload(true))
fail = false
write("a: 3\nb: 2")
assert.Equal(t, []string{"Reloading config", "Config reload was completed but requires a restart to fully apply, keys [b]"}, reload(false))
write("a: [")
lines := reload(true)
require.Len(t, lines, 2)
assert.Contains(t, lines[1], "Config reload failed, the new config did not load")
assert.Contains(t, lines[1], dir, "names the config that did not load")
}
// A client that went away still gets the reload it asked for
func TestReloadCommandReloadsWhenTheClientIsGone(t *testing.T) {
dir := t.TempDir()
require.NoError(t, os.WriteFile(filepath.Join(dir, "config.yml"), []byte("a: 1"), 0o600))
l := test.NewLogger()
c := config.NewC(l)
require.NoError(t, c.Load(dir))
reloaded := false
c.RegisterReloadCallback(func(*config.C, *config.Reload) { reloaded = true })
gone := errors.New("client is gone")
require.ErrorIs(t, reloadCommand(l, c, &lineWriter{err: gone}), gone)
assert.True(t, reloaded)
}
+161
View File
@@ -0,0 +1,161 @@
package sshd
import (
"errors"
"flag"
"fmt"
"sort"
"strings"
"github.com/armon/go-radix"
)
// CommandFlags is a function called before help or command execution to parse command line flags
// It should return a flag.FlagSet instance and a pointer to the struct that will contain parsed flags
type CommandFlags func() (*flag.FlagSet, any)
// CommandCallback is the function called when your command should execute.
// fs will be a a pointer to the struct provided by Command.Flags callback, if there was one. -h and -help are reserved
// and handled automatically for you.
// a will be any unconsumed arguments, if no Command.Flags was available this will be all the flags passed in.
// w is the writer to use when sending messages back to the client.
// If an error is returned by the callback it is logged locally, the callback should handle messaging errors to the user
// where appropriate
type CommandCallback func(fs any, a []string, w StringWriter) error
type Command struct {
Name string
ShortDescription string
Help string
Flags CommandFlags
Callback CommandCallback
}
func execCommand(c *Command, args []string, w StringWriter) error {
var (
fl *flag.FlagSet
fs any
)
if c.Flags != nil {
fl, fs = c.Flags()
if fl != nil {
// SetOutput() here in case fl.Parse dumps usage.
fl.SetOutput(w.GetWriter())
err := fl.Parse(args)
if err != nil {
// fl.Parse has dumped error information to the user via the w writer.
return err
}
args = fl.Args()
}
}
return c.Callback(fs, args, w)
}
func dumpCommands(c *radix.Tree, w StringWriter) {
err := w.WriteLine("Available commands:")
if err != nil {
return
}
cmds := make([]string, 0)
for _, l := range allCommands(c) {
cmds = append(cmds, fmt.Sprintf("%s - %s", l.Name, l.ShortDescription))
}
sort.Strings(cmds)
_ = w.Write(strings.Join(cmds, "\n") + "\n\n")
}
func lookupCommand(c *radix.Tree, sCmd string) (*Command, error) {
cmd, ok := c.Get(sCmd)
if !ok {
return nil, nil
}
command, ok := cmd.(*Command)
if !ok {
return nil, errors.New("failed to cast command")
}
return command, nil
}
func matchCommand(c *radix.Tree, cmd string) []string {
cmds := make([]string, 0)
c.WalkPrefix(cmd, func(found string, v any) bool {
cmds = append(cmds, found)
return false
})
sort.Strings(cmds)
return cmds
}
func allCommands(c *radix.Tree) []*Command {
cmds := make([]*Command, 0)
c.WalkPrefix("", func(found string, v any) bool {
cmd, ok := v.(*Command)
if ok {
cmds = append(cmds, cmd)
}
return false
})
return cmds
}
func helpCallback(commands *radix.Tree, a []string, w StringWriter) (err error) {
// Just typed help
if len(a) == 0 {
dumpCommands(commands, w)
return nil
}
// We are printing a specific commands help text
cmd, err := lookupCommand(commands, a[0])
if err != nil {
return
}
if cmd != nil {
err = w.WriteLine(fmt.Sprintf("%s - %s", cmd.Name, cmd.ShortDescription))
if err != nil {
return err
}
if cmd.Help != "" {
err = w.WriteLine(fmt.Sprintf(" %s", cmd.Help))
if err != nil {
return err
}
}
if cmd.Flags != nil {
fs, _ := cmd.Flags()
if fs != nil {
fs.SetOutput(w.GetWriter())
fs.PrintDefaults()
}
}
return nil
}
err = w.WriteLine("Command not available " + a[0])
if err != nil {
return err
}
return nil
}
func checkHelpArgs(args []string) bool {
for _, a := range args {
if a == "-h" || a == "-help" {
return true
}
}
return false
}
Loaded 100 of 123 files, more files were not shown because too many files have changed in this diff. Show more