Compare commits

..
Author SHA1 Message Date
Caleb JasikandClaude Opus 5.5 a33a6356c6 udp/darwin: batch receives with recvmsg_x
ListenOut drains the socket with recvmsg_x, xnu's private batched
recvmsg (SYS_RECVMSG_X, bsd/sys/socket_private.h), up to 64 datagrams
per syscall, and calls flush once per batch instead of once per packet.
Each msghdr_x carries its own sockaddr, so this works on the shared
unconnected socket. The send side stays on sendto: xnu only batches
sendmsg_x through the stack on connected sockets, and on an unconnected
socket like this one it falls back to one sendit per message, with
msg_name documented as unsupported.

recvmsg_x is private, so ListenOut falls back to one
ReadFromUDPAddrPort per datagram, logging once, if the kernel or a
sandbox refuses it (ENOSYS, EPERM, EOPNOTSUPP) or if a batch comes back
in a shape intact msghdr_x entries can't produce: more datagrams than
headers, a length past MTU, or a sender that isn't a matching
AF_INET/AF_INET6 sockaddr. That batch is dropped rather than delivered. IPv6 sources now arrive without their
zone, matching the Linux recvmmsg path; WriteTo already drops it.

macOS raw dnclient to a Windows peer on the same gigabit LAN, iperf3
10 s, median of 3 alternating rounds against 7cfa47d:

  download, 1/4/8 streams  606/600/604 -> 869/873/863 Mbps
  download CPU             ~159% -> ~123%
  upload                   340 -> 323 Mbps
  UDP 500M loss            0.32% -> 0.31%

Download is now close to the 902 Mbps the LAN gives without a tunnel.

TestMsghdrXKernelRoundTrip and FuzzMsghdrXKernelRoundTrip pin msghdrX
against the kernel's struct msghdr_x, which the SDK doesn't ship: they
round-trip bursts through recvmsg_x on loopback and check every field
the kernel writes. recvmsg_x never reports MSG_TRUNC (soreceive_m_list
doesn't set it), so a datagram past MTU arrives cut to MTU with Flags
0, the same as ReadFromUDP. TestListenOutSingleFallback covers the
fallback loop, TestCheckMsghdrX the shape check, and the round trip
asserts the check accepts every batch the kernel returns.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-09-23 16:30:55 -05:00
7 changed files with 526 additions and 87 deletions

No files matched your search

-3
View File
@@ -457,9 +457,6 @@ firewall:
# Rules are comprised of a protocol, port, and one or more of host, group, or CIDR # Rules are comprised of a protocol, port, and one or more of host, group, or CIDR
# Logical evaluation is roughly: port AND proto AND (ca_sha OR ca_name) AND (host OR group OR groups OR cidr) AND (local cidr) # Logical evaluation is roughly: port AND proto AND (ca_sha OR ca_name) AND (host OR group OR groups OR cidr) AND (local cidr)
# - port: Takes `0` or `any` as any, a single number `80`, a range `200-901`, or `fragment` to match second and further fragments of fragmented packets (since there is no port available). # - port: Takes `0` or `any` as any, a single number `80`, a range `200-901`, or `fragment` to match second and further fragments of fragmented packets (since there is no port available).
# For IPv6, Nebula can't tell which protocol a second or further fragment belongs to. Any rule that allows them (port `any` or `fragment`,
# and every icmp rule, since icmp ignores ports) allows them for every protocol, not just the rule's. The first fragment, which carries
# the ports, is always checked against its real protocol and port, so this never opens a port the rules don't allow.
# proto: `any`, `tcp`, `udp`, or `icmp` # proto: `any`, `tcp`, `udp`, or `icmp`
# a port specification is ignored if proto is `icmp` # a port specification is ignored if proto is `icmp`
# host: `any` or a literal hostname, ie `test-host` # host: `any` or a literal hostname, ie `test-host`
+4 -35
View File
@@ -11,8 +11,6 @@ import (
// ErrIPv6CouldNotFindPayload is returned when the ipv6 extension header chain is truncated before a terminal // ErrIPv6CouldNotFindPayload is returned when the ipv6 extension header chain is truncated before a terminal
// upper layer protocol is reached. // upper layer protocol is reached.
var ErrIPv6CouldNotFindPayload = errors.New("could not find payload in ipv6 packet") var ErrIPv6CouldNotFindPayload = errors.New("could not find payload in ipv6 packet")
var ErrIPv6ExtensionHeaderAfterFragment = errors.New("extension header after fragment header in packet")
var ErrIPv6HopByHopHeadersMustBeFirst = errors.New("hop-by-hop header must be first extension header")
const ( const (
// MaxIPv4RejectPacketSize is the largest IPv4 reject packet: // MaxIPv4RejectPacketSize is the largest IPv4 reject packet:
@@ -30,13 +28,6 @@ const (
MaxRejectPacketSize = maxIPv6RejectPacketSize MaxRejectPacketSize = maxIPv6RejectPacketSize
IPv6HeaderHopByHop = 0
IPv6HeaderRouting = 43
IPv6HeaderFragment = 44
IPv6NoNextHeader = 59
IPv6HeaderDestination = 60
IPv6HeaderAuthentication = 51
IPProtocolICMP = 1 IPProtocolICMP = 1
IPProtocolICMPv6 = 58 IPProtocolICMPv6 = 58
IPProtocolTCP = 6 IPProtocolTCP = 6
@@ -359,10 +350,6 @@ func ipv6CreateRejectTCPPacket(packet []byte, out []byte, offset int) []byte {
// Everything else, including Mobility (135), HIP (139), Shim6 (140), experimental 253/254, and real upper layer protocols like SCTP or GRE, is terminal. // Everything else, including Mobility (135), HIP (139), Shim6 (140), experimental 253/254, and real upper layer protocols like SCTP or GRE, is terminal.
// For a non-first fragment the returned protocol is the fragmented protocol and offset points at the fragment header, there is no transport header to locate. // For a non-first fragment the returned protocol is the fragmented protocol and offset points at the fragment header, there is no transport header to locate.
// Returns ErrIPv6CouldNotFindPayload if packet is smaller than an ipv6 header, or the chain is truncated, or if more than 8 extension headers are present. // Returns ErrIPv6CouldNotFindPayload if packet is smaller than an ipv6 header, or the chain is truncated, or if more than 8 extension headers are present.
// Returns ErrIPv6HopByHopHeadersMustBeFirst if a hop-by-hop header appears anywhere but directly after the ipv6 header (RFC 8200 section 4.1).
// Returns ErrIPv6ExtensionHeaderAfterFragment if any walked extension header, including a second fragment header, follows the fragment header of a
// first fragment. The upper layer header must then begin at byte 0 of the fragmentable part, beyond the reach of any non-first fragment,
// whose offset is at least 8, so overlapping fragments cannot rewrite the ports or protocol the firewall read from the first fragment.
func IPv6FindUpperProtocol(packet []byte) (nextHeader uint8, offset int, isFragment bool, anyFragment bool, err error) { func IPv6FindUpperProtocol(packet []byte) (nextHeader uint8, offset int, isFragment bool, anyFragment bool, err error) {
const maxIPv6ExtHeaders = 8 const maxIPv6ExtHeaders = 8
if len(packet) < ipv6.HeaderLen { if len(packet) < ipv6.HeaderLen {
@@ -373,44 +360,26 @@ func IPv6FindUpperProtocol(packet []byte) (nextHeader uint8, offset int, isFragm
for range maxIPv6ExtHeaders { for range maxIPv6ExtHeaders {
switch nextHeader { switch nextHeader {
case IPv6HeaderHopByHop, IPv6HeaderRouting, IPv6HeaderDestination: case 0, 43, 60: // Hop-by-Hop, Routing, Destination
if anyFragment {
return 0, 0, false, false, ErrIPv6ExtensionHeaderAfterFragment
}
if len(packet) < offset+2 { if len(packet) < offset+2 {
return 0, 0, false, false, ErrIPv6CouldNotFindPayload return 0, 0, false, false, ErrIPv6CouldNotFindPayload
} }
if nextHeader == IPv6HeaderHopByHop && offset != ipv6.HeaderLen {
//hop-by-hop must appear first, and only once, if it exists.
return 0, 0, false, false, ErrIPv6HopByHopHeadersMustBeFirst
}
nextHeader = packet[offset] nextHeader = packet[offset]
offset += (int(packet[offset+1]) + 1) << 3 offset += (int(packet[offset+1]) + 1) << 3
case IPv6HeaderFragment: case 44: // Fragment
if anyFragment {
return 0, 0, false, false, ErrIPv6ExtensionHeaderAfterFragment
}
if len(packet) < offset+8 { if len(packet) < offset+8 {
return 0, 0, false, false, ErrIPv6CouldNotFindPayload return 0, 0, false, false, ErrIPv6CouldNotFindPayload
} }
anyFragment = true anyFragment = true
// Non-first fragments carry no transport header, report the fragmented protocol and stop. // Non-first fragments carry no transport header, report the fragmented protocol and stop
// Per RFC 8200 section 4.5 the receiver only uses the offset zero fragment's next header, so the value
// returned here can't be verified.
if packet[offset+2] != 0 || packet[offset+3]&0xf8 != 0 { if packet[offset+2] != 0 || packet[offset+3]&0xf8 != 0 {
return packet[offset], offset, true, anyFragment, nil return packet[offset], offset, true, anyFragment, nil
} }
nextHeader = packet[offset] nextHeader = packet[offset]
offset += 8 offset += 8
case IPv6HeaderAuthentication: // AH case 51: // AH
if anyFragment {
return 0, 0, false, false, ErrIPv6ExtensionHeaderAfterFragment
}
if len(packet) < offset+2 { if len(packet) < offset+2 {
return 0, 0, false, false, ErrIPv6CouldNotFindPayload return 0, 0, false, false, ErrIPv6CouldNotFindPayload
} }
+11 -28
View File
@@ -522,29 +522,21 @@ func Test_IPv6FindUpperProtocol(t *testing.T) {
dst := net.ParseIP("fd00::2") dst := net.ParseIP("fd00::2")
// 8 byte extension/transport stand-ins, first byte is the next header, second is the length field // 8 byte extension/transport stand-ins, first byte is the next header, second is the length field
extToTCP := []byte{6, 0, 0, 0, 0, 0, 0, 0} // len 0 -> 8 bytes, next = TCP extToTCP := []byte{6, 0, 0, 0, 0, 0, 0, 0} // len 0 -> 8 bytes, next = TCP
extToUDP := []byte{17, 0, 0, 0, 0, 0, 0, 0} // len 0 -> 8 bytes, next = UDP extToUDP := []byte{17, 0, 0, 0, 0, 0, 0, 0} // len 0 -> 8 bytes, next = UDP
extToRouting := []byte{43, 0, 0, 0, 0, 0, 0, 0} // len 0 -> 8 bytes, next = Routing extToRouting := []byte{43, 0, 0, 0, 0, 0, 0, 0} // len 0 -> 8 bytes, next = Routing
ahToUDP := []byte{17, 0, 0, 0, 0, 0, 0, 0} // AH len 0 -> (0+2)<<2 = 8 bytes, next = UDP ahToUDP := []byte{17, 0, 0, 0, 0, 0, 0, 0} // AH len 0 -> (0+2)<<2 = 8 bytes, next = UDP
firstFragToUDP := []byte{17, 0, 0, 1, 0, 0, 0, 1} // frag offset 0, M=1, next = UDP firstFragToUDP := []byte{17, 0, 0, 1, 0, 0, 0, 1} // frag offset 0, M=1, next = UDP
nonFirstFrag := []byte{17, 0, 0, 9, 0, 0, 0, 1} // frag offset non-zero, next = UDP nonFirstFrag := []byte{17, 0, 0, 9, 0, 0, 0, 1} // frag offset non-zero, next = UDP
transport := []byte{0, 80, 1, 187, 0, 0, 0, 0} // stand-in bytes, IPv6FindUpperProtocol never reads ports transport := []byte{0, 80, 1, 187, 0, 0, 0, 0} // stand-in bytes, IPv6FindUpperProtocol never reads ports
extToHbH := []byte{0, 0, 0, 0, 0, 0, 0, 0} // len 0 -> 8 bytes, next = Hop-by-Hop extToHbH := []byte{0, 0, 0, 0, 0, 0, 0, 0} // len 0 -> 8 bytes, next = Hop-by-Hop
extToDst := []byte{60, 0, 0, 0, 0, 0, 0, 0} // len 0 -> 8 bytes, next = Destination
extToFrag := []byte{44, 0, 0, 0, 0, 0, 0, 0} // len 0 -> 8 bytes, next = Fragment
firstFragToDst := []byte{60, 0, 0, 1, 0, 0, 0, 1} // frag offset 0, M=1, next = Destination
firstFragToAH := []byte{51, 0, 0, 1, 0, 0, 0, 1} // frag offset 0, M=1, next = AH
firstFragToFrag := []byte{44, 0, 0, 1, 0, 0, 0, 1} // frag offset 0, M=1, next = Fragment
firstFragToESP := []byte{50, 0, 0, 1, 0, 0, 0, 1} // frag offset 0, M=1, next = ESP
atomicFragToDst := []byte{60, 0, 0, 0, 0, 0, 0, 1} // frag offset 0, M=0, next = Destination
nonFirstFragToDst := []byte{60, 0, 0, 9, 0, 0, 0, 1} // frag offset non-zero, next = Destination
// 8 walked headers spend the budget before the 9th slot's terminal is ever classified. This is the // 8 walked headers spend the budget before the 9th slot's terminal is ever classified. This is the
// report 4040546 shape: without failing closed the walk hands back offset 104, and a caller reads ports // report 4040546 shape: without failing closed the walk hands back offset 104, and a caller reads ports
// from the attacker's bytes there. Destination is the header that may legally repeat. // from the attacker's bytes there.
var budgetChain []byte var budgetChain []byte
for range 7 { for range 7 {
budgetChain = append(budgetChain, extToDst...) budgetChain = append(budgetChain, extToHbH...)
} }
budgetChain = append(budgetChain, extToTCP...) budgetChain = append(budgetChain, extToTCP...)
budgetChain = append(budgetChain, transport...) budgetChain = append(budgetChain, transport...)
@@ -567,20 +559,11 @@ func Test_IPv6FindUpperProtocol(t *testing.T) {
{"ah then udp", 51, append(ahToUDP, transport...), 17, ipv6.HeaderLen + 8, false, false, nil}, {"ah then udp", 51, append(ahToUDP, transport...), 17, ipv6.HeaderLen + 8, false, false, nil},
{"first fragment walks to transport", 44, append(firstFragToUDP, transport...), 17, ipv6.HeaderLen + 8, false, true, nil}, {"first fragment walks to transport", 44, append(firstFragToUDP, transport...), 17, ipv6.HeaderLen + 8, false, true, nil},
{"non-first fragment stops", 44, append(nonFirstFrag, transport...), 17, ipv6.HeaderLen, true, true, nil}, {"non-first fragment stops", 44, append(nonFirstFrag, transport...), 17, ipv6.HeaderLen, true, true, nil},
{"non-first fragment reports its claimed protocol", 44, append(nonFirstFragToDst, transport...), 60, ipv6.HeaderLen, true, true, nil},
{"routing then first fragment", 43, append(append(extToFrag, firstFragToUDP...), transport...), 17, ipv6.HeaderLen + 16, false, true, nil},
{"first fragment of a non-transport protocol is terminal", 44, append(firstFragToESP, transport...), 50, ipv6.HeaderLen + 8, false, true, nil},
{"destination after first fragment", 44, append(append(firstFragToDst, extToTCP...), transport...), 0, 0, false, false, ErrIPv6ExtensionHeaderAfterFragment},
{"ah after first fragment", 44, append(append(firstFragToAH, ahToUDP...), transport...), 0, 0, false, false, ErrIPv6ExtensionHeaderAfterFragment},
{"fragment after first fragment", 44, append(append(firstFragToFrag, nonFirstFrag...), transport...), 0, 0, false, false, ErrIPv6ExtensionHeaderAfterFragment},
{"destination after atomic fragment", 44, append(append(atomicFragToDst, extToTCP...), transport...), 0, 0, false, false, ErrIPv6ExtensionHeaderAfterFragment},
{"hop-by-hop after destination", 60, append(append(extToHbH, extToTCP...), transport...), 0, 0, false, false, ErrIPv6HopByHopHeadersMustBeFirst},
{"hop-by-hop twice", 0, append(append(extToHbH, extToTCP...), transport...), 0, 0, false, false, ErrIPv6HopByHopHeadersMustBeFirst},
{"unknown protocol is terminal", 132, transport, 132, ipv6.HeaderLen, false, false, nil}, // SCTP {"unknown protocol is terminal", 132, transport, 132, ipv6.HeaderLen, false, false, nil}, // SCTP
{"truncated extension header", 0, nil, 0, 0, false, false, ErrIPv6CouldNotFindPayload}, {"truncated extension header", 0, nil, 0, 0, false, false, ErrIPv6CouldNotFindPayload},
// Destination Options with a declared length (255+1)*8 = 2048 that runs past the 48 byte buffer, next = SCTP // Destination Options with a declared length (255+1)*8 = 2048 that runs past the 48 byte buffer, next = SCTP
{"extension length past buffer", 0, []byte{132, 255, 0, 0, 0, 0, 0, 0}, 0, 0, false, false, ErrIPv6CouldNotFindPayload}, {"extension length past buffer", 0, []byte{132, 255, 0, 0, 0, 0, 0, 0}, 0, 0, false, false, ErrIPv6CouldNotFindPayload},
{"budget exhausted fails closed", 60, budgetChain, 0, 0, false, false, ErrIPv6CouldNotFindPayload}, {"budget exhausted fails closed", 0, budgetChain, 0, 0, false, false, ErrIPv6CouldNotFindPayload},
} }
for _, tt := range tests { for _, tt := range tests {
-20
View File
@@ -710,26 +710,6 @@ func Test_newPacket_v6ExtHeaderPastBuffer(t *testing.T) {
require.ErrorIs(t, newPacket(pkt, true, p), iputil.ErrIPv6CouldNotFindPayload) require.ErrorIs(t, newPacket(pkt, true, p), iputil.ErrIPv6CouldNotFindPayload)
} }
// Test_newPacket_v6ExtHeaderAfterFragment rejects a first fragment whose transport header sits behind another extension
// header. The ports would then start 8 or more bytes into the fragmentable part, where a non-first fragment, filtered
// only as `port: fragment`, could overlap them on a receiver that splices overlapping fragments.
func Test_newPacket_v6ExtHeaderAfterFragment(t *testing.T) {
p := &firewall.ParsedPacket{}
pkt := make([]byte, 60)
pkt[0] = 0x60 // version 6
pkt[6] = byte(layers.IPProtocolIPv6Fragment) // NextHeader -> Fragment
pkt[7] = 64 // hop limit
pkt[40] = byte(layers.IPProtocolIPv6Destination) // Fragment NextHeader -> Destination Options
pkt[43] = 0x01 // offset 0, M=1: a first fragment
pkt[48] = byte(iputil.IPProtocolTCP) // Destination Options NextHeader -> TCP
pkt[49] = 0 // HdrExtLen 0 -> 8 bytes, TCP begins at 56
binary.BigEndian.PutUint16(pkt[58:60], 443) // TCP dst port, reachable by a fragment at offset 8
require.ErrorIs(t, newPacket(pkt, true, p), iputil.ErrIPv6ExtensionHeaderAfterFragment)
require.ErrorIs(t, newPacket(pkt, false, p), iputil.ErrIPv6ExtensionHeaderAfterFragment)
}
// Test_newPacket_v6ExtHeaderConfusion is a regression test for parseV6 walking any unrecognized // Test_newPacket_v6ExtHeaderConfusion is a regression test for parseV6 walking any unrecognized
// Next Header as if it were an ipv6 extension header. A real upper layer protocol Nebula doesn't // Next Header as if it were an ipv6 extension header. A real upper layer protocol Nebula doesn't
// dissect (SCTP here) is not walkable, so applying the (len+1)*8 formula marched into the SCTP // dissect (SCTP here) is not walkable, so applying the (len+1)*8 formula marched into the SCTP
+124 -1
View File
@@ -180,11 +180,121 @@ func NewUDPStatsEmitter(udpConns []Conn) func() {
return func() {} return func() {}
} }
// recvBatch is how many datagrams one recvmsg_x call may return.
const recvBatch = 64
// msghdrX mirrors xnu's struct msghdr_x (bsd/sys/socket_private.h). recvmsg_x reports each
// datagram's length in Datalen rather than in its return value.
type msghdrX struct {
Name *byte
Namelen uint32
Iov *unix.Iovec
Iovlen int32
Control *byte
Controllen uint32
Flags int32
Datalen uint64
}
// ListenOut drains the socket with recvmsg_x, darwin's private batched recvmsg, so one syscall reads
// up to recvBatch datagrams instead of one. Sends stay on sendto: xnu batches sendmsg_x through
// the stack only on connected sockets, and on this unconnected one it loops sendit per message.
func (u *StdConn) ListenOut(r EncReader, flush func()) error { func (u *StdConn) ListenOut(r EncReader, flush func()) error {
rc, err := u.UDPConn.SyscallConn()
if err != nil {
return err
}
bufs := make([][]byte, recvBatch)
names := make([]unix.RawSockaddrInet6, recvBatch)
iovs := make([]unix.Iovec, recvBatch)
hdrs := make([]msghdrX, recvBatch)
for i := range hdrs {
bufs[i] = make([]byte, MTU)
iovs[i].Base = &bufs[i][0]
iovs[i].SetLen(MTU)
hdrs[i].Iov = &iovs[i]
hdrs[i].Iovlen = 1
hdrs[i].Name = (*byte)(unsafe.Pointer(&names[i]))
}
for {
var n int
var errno syscall.Errno
err := rc.Read(func(fd uintptr) bool {
for i := range hdrs {
hdrs[i].Namelen = unix.SizeofSockaddrInet6
hdrs[i].Flags = 0
hdrs[i].Datalen = 0
}
r0, _, e := unix.Syscall6(unix.SYS_RECVMSG_X, fd, uintptr(unsafe.Pointer(&hdrs[0])), recvBatch, 0, 0, 0)
if e == unix.EAGAIN {
return false
}
n, errno = int(r0), e
return true
})
if err != nil {
if errors.Is(err, net.ErrClosed) {
return err
}
u.l.Error("unexpected udp socket receive error", "error", err)
continue
}
if errno == unix.ENOSYS || errno == unix.EPERM || errno == unix.EOPNOTSUPP {
// recvmsg_x is private, so a kernel or sandbox (such as an iOS extension's) may refuse it.
u.l.Warn("recvmsg_x unavailable, reading one datagram per syscall", "error", errno)
return u.listenOutSingle(r, flush)
}
if errno != 0 {
if errno != unix.EINTR {
u.l.Error("unexpected udp socket receive error", "error", errno)
}
continue
}
if err := checkMsghdrX(hdrs, names, n); err != nil {
// The batch was read through a layout the kernel no longer writes, so none of it is trustworthy.
u.l.Warn("recvmsg_x returned an unexpected header, reading one datagram per syscall", "error", err)
return u.listenOutSingle(r, flush)
}
for i := 0; i < n; i++ {
addr, ok := sockaddrToAddrPort(&names[i])
if !ok {
continue
}
l := int(hdrs[i].Datalen)
r(addr, bufs[i][:l:l])
}
flush()
}
}
// checkMsghdrX rejects a recvmsg_x result that intact msghdr_x entries can't produce, which is how a change
// to xnu's private struct layout would show up.
func checkMsghdrX(hdrs []msghdrX, names []unix.RawSockaddrInet6, n int) error {
if n > len(hdrs) {
return fmt.Errorf("returned %d datagrams for %d headers", n, len(hdrs))
}
for i := range n {
if hdrs[i].Datalen > MTU {
return fmt.Errorf("datagram %d is %d bytes, past the %d byte buffer", i, hdrs[i].Datalen, MTU)
}
switch {
case names[i].Family == unix.AF_INET && hdrs[i].Namelen == unix.SizeofSockaddrInet4:
case names[i].Family == unix.AF_INET6 && hdrs[i].Namelen == unix.SizeofSockaddrInet6:
default:
return fmt.Errorf("datagram %d has address family %d with length %d", i, names[i].Family, hdrs[i].Namelen)
}
}
return nil
}
// listenOutSingle reads one datagram per recvfrom and flushes after each, for when recvmsg_x is refused or misbehaves.
func (u *StdConn) listenOutSingle(r EncReader, flush func()) error {
buffer := make([]byte, MTU) buffer := make([]byte, MTU)
for { for {
// Just read one packet at a time
n, rua, err := u.ReadFromUDPAddrPort(buffer) n, rua, err := u.ReadFromUDPAddrPort(buffer)
if err != nil { if err != nil {
if errors.Is(err, net.ErrClosed) { if errors.Is(err, net.ErrClosed) {
@@ -199,6 +309,19 @@ func (u *StdConn) ListenOut(r EncReader, flush func()) error {
} }
} }
func sockaddrToAddrPort(sa *unix.RawSockaddrInet6) (netip.AddrPort, bool) {
switch sa.Family {
case unix.AF_INET:
sa4 := (*unix.RawSockaddrInet4)(unsafe.Pointer(sa))
port := binary.BigEndian.Uint16((*[2]byte)(unsafe.Pointer(&sa4.Port))[:])
return netip.AddrPortFrom(netip.AddrFrom4(sa4.Addr), port), true
case unix.AF_INET6:
port := binary.BigEndian.Uint16((*[2]byte)(unsafe.Pointer(&sa.Port))[:])
return netip.AddrPortFrom(netip.AddrFrom16(sa.Addr).Unmap(), port), true
}
return netip.AddrPort{}, false
}
func (u *StdConn) SupportsMultipleReaders() bool { func (u *StdConn) SupportsMultipleReaders() bool {
return false return false
} }
+85
View File
@@ -0,0 +1,85 @@
//go:build !e2e_testing
package udp
import (
"log/slog"
"net"
"net/netip"
"sync"
"sync/atomic"
"testing"
)
// BenchmarkListenOut measures the receive path on loopback: senders flood datagrams sized like a full tunnel
// packet, and each op is one datagram delivered to the reader. There are enough senders that the reader, not the
// senders, sets the pace. flushes/pkt is 1 when every receive is its own syscall and falls as receives batch. The
// senders share the machine, so ns/op is only comparable between runs on the same host.
func BenchmarkListenOut(b *testing.B) {
for _, tc := range []struct{ name, listen string }{
{"v4", "127.0.0.1"},
{"v6", "::1"},
} {
b.Run(tc.name, func(b *testing.B) {
c, err := NewListener(slog.New(slog.DiscardHandler), Settings{Listen: netip.AddrPortFrom(netip.MustParseAddr(tc.listen), 0)})
if err != nil {
b.Fatal(err)
}
la, err := c.LocalAddr()
if err != nil {
b.Fatal(err)
}
const size, senders = 1300, 4
txs := make([]net.Conn, senders)
for i := range txs {
if txs[i], err = net.Dial("udp", la.String()); err != nil {
b.Fatal(err)
}
defer txs[i].Close()
}
target := int64(b.N)
var got, flushes atomic.Int64
reached := make(chan struct{})
done := make(chan struct{})
go func() {
_ = c.ListenOut(func(netip.AddrPort, []byte) {
if got.Add(1) == target {
close(reached)
}
}, func() { flushes.Add(1) })
close(done)
}()
// Writes fail with ENOBUFS while the send queue is full; the flood only has to keep the receiver busy.
stop := make(chan struct{})
var sent sync.WaitGroup
for _, tx := range txs {
sent.Go(func() {
payload := make([]byte, size)
for {
select {
case <-stop:
return
default:
_, _ = tx.Write(payload)
}
}
})
}
b.SetBytes(size)
b.ResetTimer()
<-reached
b.StopTimer()
close(stop)
sent.Wait()
if err := c.Close(); err != nil {
b.Fatal(err)
}
<-done
b.ReportMetric(float64(flushes.Load())/float64(got.Load()), "flushes/pkt")
})
}
}
+302
View File
@@ -0,0 +1,302 @@
//go:build !e2e_testing
package udp
import (
"bytes"
"fmt"
"log/slog"
"net"
"net/netip"
"sync"
"syscall"
"testing"
"time"
"unsafe"
"github.com/stretchr/testify/assert"
"github.com/stretchr/testify/require"
"golang.org/x/sys/unix"
)
// A burst larger than recvBatch arrives whole, with each datagram's own bytes and source address, and
// flush runs once per recvmsg_x batch rather than once per datagram.
func TestListenOutBatchesBurst(t *testing.T) {
for _, tc := range []struct{ name, listen string }{
{"v4", "127.0.0.1"},
{"v6", "::1"},
} {
t.Run(tc.name, func(t *testing.T) {
c, err := NewListener(slog.New(slog.DiscardHandler), Settings{Listen: netip.AddrPortFrom(netip.MustParseAddr(tc.listen), 0)})
require.NoError(t, err)
la, err := c.LocalAddr()
require.NoError(t, err)
tx, err := net.Dial("udp", la.String())
require.NoError(t, err)
defer tx.Close()
txAddr := netip.MustParseAddrPort(tx.LocalAddr().String())
const total = recvBatch*3 + 7
var mu sync.Mutex
var got []string
var froms []netip.AddrPort
flushes := 0
// Queued before the reader starts, so recvmsg_x sees full batches.
for i := 0; i < total; i++ {
_, err := tx.Write([]byte(fmt.Sprintf("pkt-%03d", i)))
require.NoError(t, err)
}
done := make(chan struct{})
go func() {
_ = c.ListenOut(func(addr netip.AddrPort, payload []byte) {
mu.Lock()
got = append(got, string(payload))
froms = append(froms, addr)
mu.Unlock()
}, func() {
mu.Lock()
flushes++
mu.Unlock()
})
close(done)
}()
require.Eventually(t, func() bool {
mu.Lock()
defer mu.Unlock()
return len(got) == total
}, 5*time.Second, 10*time.Millisecond)
require.NoError(t, c.Close())
<-done
for i, p := range got {
assert.Equal(t, fmt.Sprintf("pkt-%03d", i), p)
assert.Equal(t, txAddr, froms[i])
}
assert.Equal(t, (total+recvBatch-1)/recvBatch, flushes)
})
}
}
// msghdrX round-trips through xnu's recvmsg_x on a loopback socket, v4 and v6. The kernel reads Name, Namelen,
// Iov and Iovlen from each entry and writes Namelen, Flags and Datalen back, so a field at the wrong offset or a
// wrong stride between entries shows up as a wrong length, sender, or payload.
// TestListenOutSingleFallback pins the path ListenOut takes when the kernel refuses recvmsg_x.
func TestListenOutSingleFallback(t *testing.T) {
c, err := NewListener(slog.New(slog.DiscardHandler), Settings{Listen: netip.MustParseAddrPort("127.0.0.1:0")})
require.NoError(t, err)
la, err := c.LocalAddr()
require.NoError(t, err)
tx, err := net.Dial("udp", la.String())
require.NoError(t, err)
defer tx.Close()
txAddr := netip.MustParseAddrPort(tx.LocalAddr().String())
const total = 5
for i := 0; i < total; i++ {
_, err := tx.Write([]byte(fmt.Sprintf("pkt-%03d", i)))
require.NoError(t, err)
}
var mu sync.Mutex
var got []string
flushes := 0
done := make(chan struct{})
go func() {
_ = c.(*StdConn).listenOutSingle(func(addr netip.AddrPort, payload []byte) {
assert.Equal(t, txAddr, addr)
mu.Lock()
got = append(got, string(payload))
mu.Unlock()
}, func() {
mu.Lock()
flushes++
mu.Unlock()
})
close(done)
}()
require.Eventually(t, func() bool {
mu.Lock()
defer mu.Unlock()
return len(got) == total
}, 5*time.Second, 10*time.Millisecond)
require.NoError(t, c.Close())
<-done
for i, p := range got {
assert.Equal(t, fmt.Sprintf("pkt-%03d", i), p)
}
assert.Equal(t, total, flushes)
}
func TestCheckMsghdrX(t *testing.T) {
valid := func() ([]msghdrX, []unix.RawSockaddrInet6) {
hdrs := make([]msghdrX, 2)
names := make([]unix.RawSockaddrInet6, 2)
hdrs[0].Namelen, hdrs[0].Datalen = unix.SizeofSockaddrInet4, 1
names[0].Family = unix.AF_INET
hdrs[1].Namelen, hdrs[1].Datalen = unix.SizeofSockaddrInet6, MTU
names[1].Family = unix.AF_INET6
return hdrs, names
}
hdrs, names := valid()
require.NoError(t, checkMsghdrX(hdrs, names, 2))
require.NoError(t, checkMsghdrX(hdrs, names, 0))
for _, tc := range []struct {
name string
n int
mutate func([]msghdrX, []unix.RawSockaddrInet6)
}{
{"count past headers", 3, func([]msghdrX, []unix.RawSockaddrInet6) {}},
{"datalen past buffer", 2, func(h []msghdrX, _ []unix.RawSockaddrInet6) { h[1].Datalen = MTU + 1 }},
{"unknown family", 2, func(_ []msghdrX, a []unix.RawSockaddrInet6) { a[0].Family = unix.AF_UNIX }},
{"family and length disagree", 2, func(h []msghdrX, _ []unix.RawSockaddrInet6) { h[0].Namelen = unix.SizeofSockaddrInet6 }},
} {
t.Run(tc.name, func(t *testing.T) {
hdrs, names := valid()
tc.mutate(hdrs, names)
assert.Error(t, checkMsghdrX(hdrs, names, tc.n))
})
}
}
func TestMsghdrXKernelRoundTrip(t *testing.T) {
for _, v6 := range []bool{false, true} {
t.Run(fmt.Sprintf("v6=%v", v6), func(t *testing.T) {
// Loopback delivery goes through the dlil input thread, so the settle gives all three time to
// queue and come back from one call, which is what exercises the stride.
got := recvmsgXRoundTrip(t, v6, []int{1, 300, 1400}, 4, 50*time.Millisecond)
assert.Equal(t, 3, got, "largest batch from one recvmsg_x call")
})
}
}
// Any burst, of any datagram lengths up to the kernel's maxdgram, into any number of headers, comes back in order
// with every entry's fields intact, and headers past the returned count untouched.
func FuzzMsghdrXKernelRoundTrip(f *testing.F) {
f.Add(false, uint8(3), []byte{0, 1, 1, 44, 5, 120})
f.Add(true, uint8(0), []byte{0, 0, 0x23, 0x29}) // one empty datagram, then one at MTU
f.Add(false, uint8(1), []byte{0x23, 0x2a, 0x24, 0x00, 0}) // past MTU: cut to MTU, no MSG_TRUNC
f.Add(true, uint8(recvBatch-1), bytes.Repeat([]byte{0x05, 0xdc}, recvBatch))
f.Fuzz(func(t *testing.T, v6 bool, spare uint8, sizes []byte) {
// Two bytes per datagram, big-endian, folded into [0, maxdgram].
var lens []int
for i := 0; i+1 < len(sizes) && len(lens) < recvBatch; i += 2 {
lens = append(lens, (int(sizes[i])<<8|int(sizes[i+1]))%(maxDgram+1))
}
if len(lens) == 0 {
return
}
recvmsgXRoundTrip(t, v6, lens, 1+int(spare)%recvBatch, time.Millisecond)
})
}
// maxDgram is darwin's default net.inet.udp.maxdgram, the largest datagram a loopback sender may write.
const maxDgram = 9216
// recvmsgXRoundTrip sends one datagram per entry of lens to a fresh loopback socket, drains them with recvmsg_x
// into nh headers, and checks every field the kernel writes. Neighboring datagrams differ in sender, length and
// fill byte, so no field can pass by reading a neighbor's value. It returns the largest batch one call returned.
func recvmsgXRoundTrip(t *testing.T, v6 bool, lens []int, nh int, settle time.Duration) int {
t.Helper()
network, lo := "udp4", netip.MustParseAddr("127.0.0.1")
if v6 {
network, lo = "udp6", netip.IPv6Loopback()
}
rx, err := net.ListenUDP(network, net.UDPAddrFromAddrPort(netip.AddrPortFrom(lo, 0)))
require.NoError(t, err)
defer rx.Close()
txs := make([]*net.UDPConn, 3)
for i := range txs {
txs[i], err = net.DialUDP(network, nil, rx.LocalAddr().(*net.UDPAddr))
require.NoError(t, err)
defer txs[i].Close()
}
senders := make([]netip.AddrPort, len(lens))
for i, l := range lens {
tx := txs[i%len(txs)]
senders[i] = tx.LocalAddr().(*net.UDPAddr).AddrPort()
_, err := tx.Write(bytes.Repeat([]byte{byte(i + 1)}, l))
require.NoError(t, err)
}
time.Sleep(settle)
// Namelen goes in as the v6 size on both families, so the v4 size coming back proves the kernel wrote it.
const sentinel = 0xa5a5a5a5a5a5a5a5
wantNamelen := uint32(unix.SizeofSockaddrInet4)
if v6 {
wantNamelen = unix.SizeofSockaddrInet6
}
bufs := make([][]byte, nh)
names := make([]unix.RawSockaddrInet6, nh)
iovs := make([]unix.Iovec, nh)
hdrs := make([]msghdrX, nh)
for i := range hdrs {
bufs[i] = make([]byte, MTU)
iovs[i].Base = &bufs[i][0]
iovs[i].SetLen(MTU)
}
// A datagram dropped on loopback would otherwise block rc.Read forever.
require.NoError(t, rx.SetReadDeadline(time.Now().Add(5*time.Second)))
rc, err := rx.SyscallConn()
require.NoError(t, err)
largest := 0
for next := 0; next < len(lens); {
for i := range hdrs {
clear(bufs[i])
hdrs[i] = msghdrX{
Name: (*byte)(unsafe.Pointer(&names[i])),
Namelen: unix.SizeofSockaddrInet6,
Iov: &iovs[i],
Iovlen: 1,
Flags: -1,
Datalen: sentinel,
}
}
var n int
var errno syscall.Errno
require.NoError(t, rc.Read(func(fd uintptr) bool {
r0, _, e := unix.Syscall6(unix.SYS_RECVMSG_X, fd, uintptr(unsafe.Pointer(&hdrs[0])), uintptr(nh), 0, 0, 0)
n, errno = int(r0), e
return e != unix.EAGAIN
}), "received %d of %d datagrams", next, len(lens))
require.Zero(t, errno)
require.Positive(t, n)
require.LessOrEqual(t, n, min(nh, len(lens)-next))
largest = max(largest, n)
require.NoError(t, checkMsghdrX(hdrs[:nh], names[:nh], n), "ListenOut would fall back on this batch")
for i := range n {
d := next + i
h := &hdrs[i]
want := min(lens[d], MTU)
require.EqualValues(t, want, h.Datalen, "datagram %d Datalen", d)
require.Equal(t, wantNamelen, h.Namelen, "datagram %d Namelen", d)
from, ok := sockaddrToAddrPort(&names[i])
require.True(t, ok, "datagram %d family %d", d, names[i].Family)
require.Equal(t, senders[d], from, "datagram %d sender", d)
// Flags goes in as -1 and must come back 0. xnu's list receive (soreceive_m_list) never sets
// MSG_TRUNC, so a datagram past MTU arrives silently cut to MTU, as recvfrom through net.UDPConn does.
require.Zero(t, h.Flags, "datagram %d Flags", d)
require.Equal(t, bytes.Repeat([]byte{byte(d + 1)}, want), bufs[i][:want], "datagram %d payload", d)
if want < MTU {
require.Zero(t, bufs[i][want], "datagram %d wrote past Datalen", d)
}
}
for i := n; i < nh; i++ {
require.EqualValues(t, uint64(sentinel), hdrs[i].Datalen, "spare header %d Datalen", i)
require.EqualValues(t, unix.SizeofSockaddrInet6, hdrs[i].Namelen, "spare header %d Namelen", i)
}
next += n
}
return largest
}