claude does TUN virtio header support

.github/workflows/smoke-extra.yml

@@ -30,9 +30,6 @@ jobs:
     - name: add hashicorp source
       run: wget -O- https://apt.releases.hashicorp.com/gpg | gpg --dearmor | sudo tee /usr/share/keyrings/hashicorp-archive-keyring.gpg && echo "deb [signed-by=/usr/share/keyrings/hashicorp-archive-keyring.gpg] https://apt.releases.hashicorp.com $(lsb_release -cs) main" | sudo tee /etc/apt/sources.list.d/hashicorp.list
 
-    - name: workaround AMD-V issue  # https://github.com/cri-o/packaging/pull/306
-      run: sudo rmmod kvm_amd
-
     - name: install vagrant
       run: sudo apt-get update && sudo apt-get install -y vagrant virtualbox
 

.github/workflows/smoke/smoke.sh

@@ -37,18 +37,17 @@ docker run --name host4 --device /dev/net/tun:/dev/net/tun --cap-add NET_ADMIN -
 sleep 1
 
 # grab tcpdump pcaps for debugging
-docker exec lighthouse1 tcpdump -i tun0 -q -w - -U 2>logs/lighthouse1.inside.log >logs/lighthouse1.inside.pcap &
+docker exec lighthouse1 tcpdump -i nebula1 -q -w - -U 2>logs/lighthouse1.inside.log >logs/lighthouse1.inside.pcap &
 docker exec lighthouse1 tcpdump -i eth0 -q -w - -U 2>logs/lighthouse1.outside.log >logs/lighthouse1.outside.pcap &
-docker exec host2 tcpdump -i tun0 -q -w - -U 2>logs/host2.inside.log >logs/host2.inside.pcap &
+docker exec host2 tcpdump -i nebula1 -q -w - -U 2>logs/host2.inside.log >logs/host2.inside.pcap &
 docker exec host2 tcpdump -i eth0 -q -w - -U 2>logs/host2.outside.log >logs/host2.outside.pcap &
-docker exec host3 tcpdump -i tun0 -q -w - -U 2>logs/host3.inside.log >logs/host3.inside.pcap &
+docker exec host3 tcpdump -i nebula1 -q -w - -U 2>logs/host3.inside.log >logs/host3.inside.pcap &
 docker exec host3 tcpdump -i eth0 -q -w - -U 2>logs/host3.outside.log >logs/host3.outside.pcap &
-docker exec host4 tcpdump -i tun0 -q -w - -U 2>logs/host4.inside.log >logs/host4.inside.pcap &
+docker exec host4 tcpdump -i nebula1 -q -w - -U 2>logs/host4.inside.log >logs/host4.inside.pcap &
 docker exec host4 tcpdump -i eth0 -q -w - -U 2>logs/host4.outside.log >logs/host4.outside.pcap &
 
 docker exec host2 ncat -nklv 0.0.0.0 2000 &
 docker exec host3 ncat -nklv 0.0.0.0 2000 &
-docker exec host4 ncat -nkluv 0.0.0.0 4000 &
 docker exec host2 ncat -e '/usr/bin/echo host2' -nkluv 0.0.0.0 3000 &
 docker exec host3 ncat -e '/usr/bin/echo host3' -nkluv 0.0.0.0 3000 &
 
@@ -120,11 +119,11 @@ echo
 echo " *** Testing conntrack"
 echo
 set -x
-
-# host2 speaking to host4 on UDP 4000 should allow it to reply, when firewall rules would normally not permit this
-docker exec host2 sh -c "/usr/bin/echo host2 | ncat -nuv 192.168.100.4 4000"
-docker exec host2 ncat -e '/usr/bin/echo helloagainfromhost2' -nkluv 0.0.0.0 4000 &
-docker exec host4 sh -c "/usr/bin/echo host4 | ncat -nuv 192.168.100.2 4000"
+# host2 can ping host3 now that host3 pinged it first
+docker exec host2 ping -c1 192.168.100.3
+# host4 can ping host2 once conntrack established
+docker exec host2 ping -c1 192.168.100.4
+docker exec host4 ping -c1 192.168.100.2
 
 docker exec host4 sh -c 'kill 1'
 docker exec host3 sh -c 'kill 1'

CHANGELOG.md

@@ -7,19 +7,6 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
 
 ## [Unreleased]
 
-## [1.10.3] - 2026-02-06
-
-### Security
-
-- Fix an issue where blocklist bypass is possible when using curve P256 since the signature can have 2 valid representations.
-  Both fingerprint representations will be tested against the blocklist.
-  Any newly issued P256 based certificates will have their signature clamped to the low-s form.
-  Nebula will assert the low-s signature form when validating certificates in a future version. [GHSA-69x3-g4r3-p962](https://github.com/slackhq/nebula/security/advisories/GHSA-69x3-g4r3-p962)
-
-### Changed
-
-- Improve error reporting if nebula fails to start due to a tun device naming issue. (#1588)
-
 ## [1.10.2] - 2026-01-21
 
 ### Fixed
@@ -788,8 +775,7 @@ created.)
 
 - Initial public release.
 
-[Unreleased]: https://github.com/slackhq/nebula/compare/v1.10.3...HEAD
-[1.10.3]: https://github.com/slackhq/nebula/releases/tag/v1.10.3
+[Unreleased]: https://github.com/slackhq/nebula/compare/v1.10.2...HEAD
 [1.10.2]: https://github.com/slackhq/nebula/releases/tag/v1.10.2
 [1.10.1]: https://github.com/slackhq/nebula/releases/tag/v1.10.1
 [1.10.0]: https://github.com/slackhq/nebula/releases/tag/v1.10.0

CODEOWNERS

@@ -1 +0,0 @@
-#ECCN:Open Source

boring.go

@@ -1,4 +1,5 @@
 //go:build boringcrypto
+// +build boringcrypto
 
 package nebula
 

cert/ca_pool.go

@@ -141,23 +141,10 @@ func (ncp *CAPool) VerifyCertificate(now time.Time, c Certificate) (*CachedCerti
 		return nil, err
 	}
 
-	// Pre nebula v1.10.3 could generate signatures in either high or low s form and validation
-	// of signatures allowed for either. Nebula v1.10.3 and beyond clamps signature generation to low-s form
-	// but validation still allows for either. Since a change in the signature bytes affects the fingerprint, we
-	// need to test both forms until such a time comes that we enforce low-s form on signature validation.
-	fp2, err := CalculateAlternateFingerprint(c)
-	if err != nil {
-		return nil, fmt.Errorf("could not calculate alternate fingerprint to verify: %w", err)
-	}
-	if fp2 != "" && ncp.IsBlocklisted(fp2) {
-		return nil, ErrBlockListed
-	}
-
 	cc := CachedCertificate{
 		Certificate:       c,
 		InvertedGroups:    make(map[string]struct{}),
 		Fingerprint:       fp,
-		fingerprint2:      fp2,
 		signerFingerprint: signer.Fingerprint,
 	}
 
@@ -171,11 +158,6 @@ func (ncp *CAPool) VerifyCertificate(now time.Time, c Certificate) (*CachedCerti
 // VerifyCachedCertificate is the same as VerifyCertificate other than it operates on a pre-verified structure and
 // is a cheaper operation to perform as a result.
 func (ncp *CAPool) VerifyCachedCertificate(now time.Time, c *CachedCertificate) error {
-	// Check any available alternate fingerprint forms for this certificate, re P256 high-s/low-s
-	if c.fingerprint2 != "" && ncp.IsBlocklisted(c.fingerprint2) {
-		return ErrBlockListed
-	}
-
 	_, err := ncp.verify(c.Certificate, now, c.Fingerprint, c.signerFingerprint)
 	return err
 }

cert/ca_pool_test.go

@@ -5,7 +5,6 @@ import (
 	"testing"
 	"time"
 
-	"github.com/slackhq/nebula/cert/p256"
 	"github.com/stretchr/testify/assert"
 	"github.com/stretchr/testify/require"
 )
@@ -171,15 +170,6 @@ func TestCertificateV1_VerifyP256(t *testing.T) {
 	_, err = caPool.VerifyCertificate(time.Now(), c)
 	require.EqualError(t, err, "certificate is in the block list")
 
-	// Create a copy of the cert and swap to the alternate form for the signature
-	nc := c.Copy()
-	b, err := p256.Swap(c.Signature())
-	require.NoError(t, err)
-	require.NoError(t, nc.(*certificateV1).setSignature(b))
-
-	_, err = caPool.VerifyCertificate(time.Now(), nc)
-	require.EqualError(t, err, "certificate is in the block list")
-
 	caPool.ResetCertBlocklist()
 	_, err = caPool.VerifyCertificate(time.Now(), c)
 	require.NoError(t, err)
@@ -197,7 +187,7 @@ func TestCertificateV1_VerifyP256(t *testing.T) {
 	require.NoError(t, err)
 
 	caPool = NewCAPool()
-	b, err = caPool.AddCAFromPEM(caPem)
+	b, err := caPool.AddCAFromPEM(caPem)
 	require.NoError(t, err)
 	assert.Empty(t, b)
 
@@ -206,17 +196,7 @@ func TestCertificateV1_VerifyP256(t *testing.T) {
 	})
 
 	c, _, _, _ = NewTestCert(Version1, Curve_P256, ca, caKey, "test", time.Now(), time.Now().Add(5*time.Minute), nil, nil, []string{"test1"})
-	cc, err := caPool.VerifyCertificate(time.Now(), c)
-	require.NoError(t, err)
-
-	// Reset the blocklist and block the alternate form fingerprint
-	caPool.ResetCertBlocklist()
-	caPool.BlocklistFingerprint(cc.fingerprint2)
-	err = caPool.VerifyCachedCertificate(time.Now(), cc)
-	require.EqualError(t, err, "certificate is in the block list")
-
-	caPool.ResetCertBlocklist()
-	err = caPool.VerifyCachedCertificate(time.Now(), cc)
+	_, err = caPool.VerifyCertificate(time.Now(), c)
 	require.NoError(t, err)
 }
 
@@ -414,15 +394,6 @@ func TestCertificateV2_VerifyP256(t *testing.T) {
 	_, err = caPool.VerifyCertificate(time.Now(), c)
 	require.EqualError(t, err, "certificate is in the block list")
 
-	// Create a copy of the cert and swap to the alternate form for the signature
-	nc := c.Copy()
-	b, err := p256.Swap(c.Signature())
-	require.NoError(t, err)
-	require.NoError(t, nc.(*certificateV2).setSignature(b))
-
-	_, err = caPool.VerifyCertificate(time.Now(), nc)
-	require.EqualError(t, err, "certificate is in the block list")
-
 	caPool.ResetCertBlocklist()
 	_, err = caPool.VerifyCertificate(time.Now(), c)
 	require.NoError(t, err)
@@ -440,7 +411,7 @@ func TestCertificateV2_VerifyP256(t *testing.T) {
 	require.NoError(t, err)
 
 	caPool = NewCAPool()
-	b, err = caPool.AddCAFromPEM(caPem)
+	b, err := caPool.AddCAFromPEM(caPem)
 	require.NoError(t, err)
 	assert.Empty(t, b)
 
@@ -449,17 +420,7 @@ func TestCertificateV2_VerifyP256(t *testing.T) {
 	})
 
 	c, _, _, _ = NewTestCert(Version2, Curve_P256, ca, caKey, "test", time.Now(), time.Now().Add(5*time.Minute), nil, nil, []string{"test1"})
-	cc, err := caPool.VerifyCertificate(time.Now(), c)
-	require.NoError(t, err)
-
-	// Reset the blocklist and block the alternate form fingerprint
-	caPool.ResetCertBlocklist()
-	caPool.BlocklistFingerprint(cc.fingerprint2)
-	err = caPool.VerifyCachedCertificate(time.Now(), cc)
-	require.EqualError(t, err, "certificate is in the block list")
-
-	caPool.ResetCertBlocklist()
-	err = caPool.VerifyCachedCertificate(time.Now(), cc)
+	_, err = caPool.VerifyCertificate(time.Now(), c)
 	require.NoError(t, err)
 }
 

cert/cert.go

@@ -4,8 +4,6 @@ import (
 	"fmt"
 	"net/netip"
 	"time"
-
-	"github.com/slackhq/nebula/cert/p256"
 )
 
 type Version uint8
@@ -112,9 +110,6 @@ type CachedCertificate struct {
 	InvertedGroups    map[string]struct{}
 	Fingerprint       string
 	signerFingerprint string
-
-	// A place to store a 2nd fingerprint if the certificate could have one, such as with P256
-	fingerprint2 string
 }
 
 func (cc *CachedCertificate) String() string {
@@ -157,31 +152,3 @@ func Recombine(v Version, rawCertBytes, publicKey []byte, curve Curve) (Certific
 
 	return c, nil
 }
-
-// CalculateAlternateFingerprint calculates a 2nd fingerprint representation for P256 certificates
-// CAPool blocklist testing through `VerifyCertificate` and `VerifyCachedCertificate` automatically performs this step.
-func CalculateAlternateFingerprint(c Certificate) (string, error) {
-	if c.Curve() != Curve_P256 {
-		return "", nil
-	}
-
-	nc := c.Copy()
-	b, err := p256.Swap(nc.Signature())
-	if err != nil {
-		return "", err
-	}
-
-	switch v := nc.(type) {
-	case *certificateV1:
-		err = v.setSignature(b)
-	case *certificateV2:
-		err = v.setSignature(b)
-	default:
-		return "", ErrUnknownVersion
-	}
-
-	if err != nil {
-		return "", err
-	}
-	return nc.Fingerprint()
-}

cert/p256/p256.go

@@ -1,122 +0,0 @@
-package p256
-
-import (
-	"crypto/elliptic"
-	"errors"
-	"math/big"
-
-	"filippo.io/bigmod"
-
-	"golang.org/x/crypto/cryptobyte"
-	"golang.org/x/crypto/cryptobyte/asn1"
-)
-
-var halfN = new(big.Int).Rsh(elliptic.P256().Params().N, 1)
-var nMod *bigmod.Modulus
-
-func init() {
-	n, err := bigmod.NewModulus(elliptic.P256().Params().N.Bytes())
-	if err != nil {
-		panic(err)
-	}
-	nMod = n
-}
-
-func IsNormalized(sig []byte) (bool, error) {
-	r, s, err := parseSignature(sig)
-	if err != nil {
-		return false, err
-	}
-	return checkLowS(r, s), nil
-}
-
-func checkLowS(_, s []byte) bool {
-	bigS := new(big.Int).SetBytes(s)
-	// Check if S <= (N/2), because we want to include the midpoint in the set of low-s
-	return bigS.Cmp(halfN) <= 0
-}
-
-func swap(r, s []byte) ([]byte, []byte, error) {
-	var err error
-	bigS, err := bigmod.NewNat().SetBytes(s, nMod)
-	if err != nil {
-		return nil, nil, err
-	}
-	sNormalized := nMod.Nat().Sub(bigS, nMod)
-
-	return r, sNormalized.Bytes(nMod), nil
-}
-
-func Normalize(sig []byte) ([]byte, error) {
-	r, s, err := parseSignature(sig)
-	if err != nil {
-		return nil, err
-	}
-
-	if checkLowS(r, s) {
-		return sig, nil
-	}
-
-	newR, newS, err := swap(r, s)
-	if err != nil {
-		return nil, err
-	}
-
-	return encodeSignature(newR, newS)
-}
-
-// Swap will change sig between its current form to the opposite high or low form.
-func Swap(sig []byte) ([]byte, error) {
-	r, s, err := parseSignature(sig)
-	if err != nil {
-		return nil, err
-	}
-
-	newR, newS, err := swap(r, s)
-	if err != nil {
-		return nil, err
-	}
-
-	return encodeSignature(newR, newS)
-}
-
-// parseSignature taken exactly from crypto/ecdsa/ecdsa.go
-func parseSignature(sig []byte) (r, s []byte, err error) {
-	var inner cryptobyte.String
-	input := cryptobyte.String(sig)
-	if !input.ReadASN1(&inner, asn1.SEQUENCE) ||
-		!input.Empty() ||
-		!inner.ReadASN1Integer(&r) ||
-		!inner.ReadASN1Integer(&s) ||
-		!inner.Empty() {
-		return nil, nil, errors.New("invalid ASN.1")
-	}
-	return r, s, nil
-}
-
-func encodeSignature(r, s []byte) ([]byte, error) {
-	var b cryptobyte.Builder
-	b.AddASN1(asn1.SEQUENCE, func(b *cryptobyte.Builder) {
-		addASN1IntBytes(b, r)
-		addASN1IntBytes(b, s)
-	})
-	return b.Bytes()
-}
-
-// addASN1IntBytes encodes in ASN.1 a positive integer represented as
-// a big-endian byte slice with zero or more leading zeroes.
-func addASN1IntBytes(b *cryptobyte.Builder, bytes []byte) {
-	for len(bytes) > 0 && bytes[0] == 0 {
-		bytes = bytes[1:]
-	}
-	if len(bytes) == 0 {
-		b.SetError(errors.New("invalid integer"))
-		return
-	}
-	b.AddASN1(asn1.INTEGER, func(c *cryptobyte.Builder) {
-		if bytes[0]&0x80 != 0 {
-			c.AddUint8(0)
-		}
-		c.AddBytes(bytes)
-	})
-}

cert/p256/p256_test.go

@@ -1,28 +0,0 @@
-package p256
-
-import (
-	"crypto/ecdsa"
-	"crypto/elliptic"
-	"crypto/rand"
-	"testing"
-
-	"github.com/stretchr/testify/require"
-)
-
-func TestFlipping(t *testing.T) {
-	priv, err1 := ecdsa.GenerateKey(elliptic.P256(), rand.Reader)
-	require.NoError(t, err1)
-
-	out, err := ecdsa.SignASN1(rand.Reader, priv, []byte("big chungus"))
-	require.NoError(t, err)
-
-	r, s, err := parseSignature(out)
-	require.NoError(t, err)
-
-	r, s1, err := swap(r, s)
-	require.NoError(t, err)
-	r, s2, err := swap(r, s1)
-	require.NoError(t, err)
-	require.Equal(t, s, s2)
-	require.NotEqual(t, s, s1)
-}

cert/sign.go

@@ -9,8 +9,6 @@ import (
 	"fmt"
 	"net/netip"
 	"time"
-
-	"github.com/slackhq/nebula/cert/p256"
 )
 
 // TBSCertificate represents a certificate intended to be signed.
@@ -128,13 +126,6 @@ func (t *TBSCertificate) SignWith(signer Certificate, curve Curve, sp SignerLamb
 		return nil, err
 	}
 
-	if curve == Curve_P256 {
-		sig, err = p256.Normalize(sig)
-		if err != nil {
-			return nil, err
-		}
-	}
-
 	err = c.setSignature(sig)
 	if err != nil {
 		return nil, err

cert/sign_test.go

@@ -9,7 +9,6 @@ import (
 	"testing"
 	"time"
 
-	"github.com/slackhq/nebula/cert/p256"
 	"github.com/stretchr/testify/assert"
 	"github.com/stretchr/testify/require"
 )
@@ -90,48 +89,3 @@ func TestCertificateV1_SignP256(t *testing.T) {
 	require.NoError(t, err)
 	assert.NotNil(t, uc)
 }
-
-func TestCertificate_SignP256_AlwaysNormalized(t *testing.T) {
-	before := time.Now().Add(time.Second * -60).Round(time.Second)
-	after := time.Now().Add(time.Second * 60).Round(time.Second)
-	pubKey := []byte("01234567890abcedfghij1234567890ab1234567890abcedfghij1234567890ab")
-
-	tbs := TBSCertificate{
-		Version: Version1,
-		Name:    "testing",
-		Networks: []netip.Prefix{
-			mustParsePrefixUnmapped("10.1.1.1/24"),
-			mustParsePrefixUnmapped("10.1.1.2/16"),
-		},
-		UnsafeNetworks: []netip.Prefix{
-			mustParsePrefixUnmapped("9.1.1.2/24"),
-			mustParsePrefixUnmapped("9.1.1.3/16"),
-		},
-		Groups:    []string{"test-group1", "test-group2", "test-group3"},
-		NotBefore: before,
-		NotAfter:  after,
-		PublicKey: pubKey,
-		IsCA:      true,
-		Curve:     Curve_P256,
-	}
-
-	priv, err := ecdsa.GenerateKey(elliptic.P256(), rand.Reader)
-	require.NoError(t, err)
-	pub := elliptic.Marshal(elliptic.P256(), priv.PublicKey.X, priv.PublicKey.Y)
-	rawPriv := priv.D.FillBytes(make([]byte, 32))
-
-	for i := 0; i < 1000; i++ {
-		if i&1 == 1 {
-			tbs.Version = Version1
-		} else {
-			tbs.Version = Version2
-		}
-		c, err := tbs.Sign(nil, Curve_P256, rawPriv)
-		require.NoError(t, err)
-		assert.NotNil(t, c)
-		assert.True(t, c.CheckSignature(pub))
-		normie, err := p256.IsNormalized(c.Signature())
-		require.NoError(t, err)
-		assert.True(t, normie)
-	}
-}

control_tester.go

@@ -1,4 +1,5 @@
 //go:build e2e_testing
+// +build e2e_testing
 
 package nebula
 

dist/wireshark/nebula.lua

@@ -84,24 +84,30 @@ end
 
 function nebula.prefs_changed()
     if default_settings.all_ports == nebula.prefs.all_ports and default_settings.port == nebula.prefs.port then
+        -- Nothing changed, bail
         return
     end
 
-    -- Remove all existing registrations
+    -- Remove our old dissector
     DissectorTable.get("udp.port"):remove_all(nebula)
 
-    if nebula.prefs.all_ports then
-        -- Register on every port for hole punch capture
+    if nebula.prefs.all_ports and default_settings.all_ports ~= nebula.prefs.all_ports then
+        default_settings.all_port = nebula.prefs.all_ports
+
         for i=0, 65535 do
             DissectorTable.get("udp.port"):add(i, nebula)
         end
-    else
-        -- Register on the configured port only
-        DissectorTable.get("udp.port"):add(nebula.prefs.port, nebula)
+
+        -- no need to establish again on specific ports
+        return
     end
 
-    default_settings.all_ports = nebula.prefs.all_ports
-    default_settings.port = nebula.prefs.port
+
+    if default_settings.all_ports ~= nebula.prefs.all_ports then
+        -- Add our new port dissector
+        default_settings.port = nebula.prefs.port
+        DissectorTable.get("udp.port"):add(default_settings.port, nebula)
+    end
 end
 
 DissectorTable.get("udp.port"):add(default_settings.port, nebula)

e2e/tunnels_test.go

@@ -12,8 +12,6 @@ import (
 	"github.com/slackhq/nebula/cert"
 	"github.com/slackhq/nebula/cert_test"
 	"github.com/slackhq/nebula/e2e/router"
-	"github.com/slackhq/nebula/header"
-	"github.com/slackhq/nebula/udp"
 	"github.com/stretchr/testify/assert"
 	"gopkg.in/yaml.v3"
 )
@@ -367,106 +365,3 @@ func TestCrossStackRelaysWork(t *testing.T) {
 	//theirControl.Stop()
 	//relayControl.Stop()
 }
-
-func TestCloseTunnelAuthenticated(t *testing.T) {
-	ca, _, caKey, _ := cert_test.NewTestCaCert(cert.Version1, cert.Curve_CURVE25519, time.Now(), time.Now().Add(10*time.Minute), nil, nil, []string{})
-	myControl, myVpnIpNet, myUdpAddr, _ := newSimpleServer(cert.Version1, ca, caKey, "me", "10.128.0.1/24", m{"tunnels": m{"drop_inactive": true, "inactivity_timeout": "5s"}})
-	theirControl, theirVpnIpNet, theirUdpAddr, _ := newSimpleServer(cert.Version1, ca, caKey, "them", "10.128.0.2/24", m{"tunnels": m{"drop_inactive": true, "inactivity_timeout": "10m"}})
-
-	// Share our underlay information
-	myControl.InjectLightHouseAddr(theirVpnIpNet[0].Addr(), theirUdpAddr)
-	theirControl.InjectLightHouseAddr(myVpnIpNet[0].Addr(), myUdpAddr)
-
-	// Start the servers
-	myControl.Start()
-	theirControl.Start()
-
-	r := router.NewR(t, myControl, theirControl)
-
-	r.Log("Assert the tunnel between me and them works")
-	assertTunnel(t, myVpnIpNet[0].Addr(), theirVpnIpNet[0].Addr(), myControl, theirControl, r)
-
-	r.Log("Close the tunnel")
-	myControl.CloseTunnel(theirVpnIpNet[0].Addr(), false)
-	r.FlushAll()
-
-	waitStart := time.Now()
-	for {
-		myIndexes := len(myControl.GetHostmap().Indexes)
-		theirIndexes := len(theirControl.GetHostmap().Indexes)
-		if myIndexes == 0 && theirIndexes == 0 {
-			break
-		}
-
-		since := time.Since(waitStart)
-		r.Logf("my tunnels: %v; their tunnels: %v; duration: %v", myIndexes, theirIndexes, since)
-		if since > time.Second*6 {
-			t.Fatal("Tunnel should have been declared inactive after 2 seconds and before 6 seconds")
-		}
-
-		time.Sleep(1 * time.Second)
-		//r.FlushAll()
-	}
-
-	r.Logf("Happy path success, tunnels were dropped within %v", time.Since(waitStart))
-
-	myControl.InjectLightHouseAddr(theirVpnIpNet[0].Addr(), theirUdpAddr)
-	theirControl.InjectLightHouseAddr(myVpnIpNet[0].Addr(), myUdpAddr)
-	r.Log("Assert another tunnel between me and them works")
-	assertTunnel(t, myVpnIpNet[0].Addr(), theirVpnIpNet[0].Addr(), myControl, theirControl, r)
-	hi := myControl.GetHostInfoByVpnAddr(theirVpnIpNet[0].Addr(), false)
-	if hi == nil {
-		t.Fatal("There is no hostinfo for this tunnel")
-	}
-	myHi := theirControl.GetHostInfoByVpnAddr(myVpnIpNet[0].Addr(), false)
-	if myHi == nil {
-		t.Fatal("There is no hostinfo for my tunnel")
-	}
-	r.Log("It does")
-
-	buf := make([]byte, 1024)
-	hdr := header.H{
-		Version:        1,
-		Type:           header.CloseTunnel,
-		Subtype:        0,
-		Reserved:       0,
-		RemoteIndex:    hi.RemoteIndex,
-		MessageCounter: 5,
-	}
-	out, err := hdr.Encode(buf)
-	if err != nil {
-		t.Fatal(err)
-	}
-
-	pkt := &udp.Packet{
-		To:   hi.CurrentRemote,
-		From: myHi.CurrentRemote,
-		Data: out,
-	}
-	r.InjectUDPPacket(myControl, theirControl, pkt)
-	r.Log("Injected bogus close tunnel. Let's see!")
-	waitStart = time.Now()
-	for {
-		myIndexes := len(myControl.GetHostmap().Indexes)
-		theirIndexes := len(theirControl.GetHostmap().Indexes)
-		if myIndexes == 0 {
-			t.Fatal("myIndexes should not be 0")
-		}
-		if theirIndexes == 0 {
-			t.Fatal("theirIndexes should not be 0, they should have rejected this bogus packet")
-		}
-
-		since := time.Since(waitStart)
-		r.Logf("my tunnels: %v; their tunnels: %v; duration: %v", myIndexes, theirIndexes, since)
-		if since > time.Second*4 {
-			t.Log("The tunnel would have been gone by now")
-			break
-		}
-
-		time.Sleep(1 * time.Second)
-		r.FlushAll()
-	}
-
-	myControl.Stop()
-	theirControl.Stop()
-}

examples/config.yml

@@ -342,14 +342,6 @@ logging:
   # after receiving the response for lighthouse queries
   #trigger_buffer: 64
 
-  # max_rate limits the number of new inbound handshakes per second. Once the limit is reached,
-  # new handshakes are dropped until the next second. A value of 0 means unlimited (default).
-  # This is useful for preventing DoS attacks that attempt to exhaust CPU with handshake crypto.
-  # Running `openssl speed ecdhp256` on your hardware can be a good rule of thumb for choosing
-  # a max, as each handshake performs similar DH operations. Note that this benchmarks a single
-  # core, so you may wish to scale the value by the number of `routines` configured.
-  #max_rate: 0
-
 # Tunnel manager settings
 #tunnels:
   # drop_inactive controls whether inactive tunnels are maintained or dropped after the inactive_timeout period has
@@ -390,8 +382,8 @@ firewall:
   # Rules are comprised of a protocol, port, and one or more of host, group, or CIDR
   # Logical evaluation is roughly: port AND proto AND (ca_sha OR ca_name) AND (host OR group OR groups OR cidr) AND (local cidr)
   # - port: Takes `0` or `any` as any, a single number `80`, a range `200-901`, or `fragment` to match second and further fragments of fragmented packets (since there is no port available).
+  #   code: same as port but makes more sense when talking about ICMP, TODO: this is not currently implemented in a way that works, use `any`
   #   proto: `any`, `tcp`, `udp`, or `icmp`
-  #          a port specification is ignored if proto is `icmp`
   #   host: `any` or a literal hostname, ie `test-host`
   #   group: `any` or a literal group name, ie `default-group`
   #   groups: Same as group but accepts a list of values. Multiple values are AND'd together and a certificate would have to contain all groups to pass

firewall.go

@@ -230,7 +230,7 @@ func NewFirewallFromConfig(l *logrus.Logger, cs *CertState, c *config.C) (*Firew
 	case "drop":
 		fw.OutSendReject = false
 	default:
-		l.WithField("action", outboundAction).Warn("invalid firewall.outbound_action, defaulting to `drop`")
+		l.WithField("action", inboundAction).Warn("invalid firewall.outbound_action, defaulting to `drop`")
 		fw.OutSendReject = false
 	}
 
@@ -249,6 +249,20 @@ func NewFirewallFromConfig(l *logrus.Logger, cs *CertState, c *config.C) (*Firew
 
 // AddRule properly creates the in memory rule structure for a firewall table.
 func (f *Firewall) AddRule(incoming bool, proto uint8, startPort int32, endPort int32, groups []string, host string, cidr, localCidr, caName string, caSha string) error {
+	// We need this rule string because we generate a hash. Removing this will break firewall reload.
+	ruleString := fmt.Sprintf(
+		"incoming: %v, proto: %v, startPort: %v, endPort: %v, groups: %v, host: %v, ip: %v, localIp: %v, caName: %v, caSha: %s",
+		incoming, proto, startPort, endPort, groups, host, cidr, localCidr, caName, caSha,
+	)
+	f.rules += ruleString + "\n"
+
+	direction := "incoming"
+	if !incoming {
+		direction = "outgoing"
+	}
+	f.l.WithField("firewallRule", m{"direction": direction, "proto": proto, "startPort": startPort, "endPort": endPort, "groups": groups, "host": host, "cidr": cidr, "localCidr": localCidr, "caName": caName, "caSha": caSha}).
+		Info("Firewall rule added")
+
 	var (
 		ft *FirewallTable
 		fp firewallPort
@@ -266,12 +280,6 @@ func (f *Firewall) AddRule(incoming bool, proto uint8, startPort int32, endPort
 	case firewall.ProtoUDP:
 		fp = ft.UDP
 	case firewall.ProtoICMP, firewall.ProtoICMPv6:
-		//ICMP traffic doesn't have ports, so we always coerce to "any", even if a value is provided
-		if startPort != firewall.PortAny {
-			f.l.WithField("startPort", startPort).Warn("ignoring port specification for ICMP firewall rule")
-		}
-		startPort = firewall.PortAny
-		endPort = firewall.PortAny
 		fp = ft.ICMP
 	case firewall.ProtoAny:
 		fp = ft.AnyProto
@@ -279,20 +287,6 @@ func (f *Firewall) AddRule(incoming bool, proto uint8, startPort int32, endPort
 		return fmt.Errorf("unknown protocol %v", proto)
 	}
 
-	// We need this rule string because we generate a hash. Removing this will break firewall reload.
-	ruleString := fmt.Sprintf(
-		"incoming: %v, proto: %v, startPort: %v, endPort: %v, groups: %v, host: %v, ip: %v, localIp: %v, caName: %v, caSha: %s",
-		incoming, proto, startPort, endPort, groups, host, cidr, localCidr, caName, caSha,
-	)
-	f.rules += ruleString + "\n"
-
-	direction := "incoming"
-	if !incoming {
-		direction = "outgoing"
-	}
-	f.l.WithField("firewallRule", m{"direction": direction, "proto": proto, "startPort": startPort, "endPort": endPort, "groups": groups, "host": host, "cidr": cidr, "localCidr": localCidr, "caName": caName, "caSha": caSha}).
-		Info("Firewall rule added")
-
 	return fp.addRule(f, startPort, endPort, groups, host, cidr, localCidr, caName, caSha)
 }
 
@@ -355,31 +349,24 @@ func AddFirewallRulesFromConfig(l *logrus.Logger, inbound bool, c *config.C, fw
 			sPort = r.Port
 		}
 
+		startPort, endPort, err := parsePort(sPort)
+		if err != nil {
+			return fmt.Errorf("%s rule #%v; %s %s", table, i, errPort, err)
+		}
+
 		var proto uint8
-		var startPort, endPort int32
 		switch r.Proto {
 		case "any":
 			proto = firewall.ProtoAny
-			startPort, endPort, err = parsePort(sPort)
 		case "tcp":
 			proto = firewall.ProtoTCP
-			startPort, endPort, err = parsePort(sPort)
 		case "udp":
 			proto = firewall.ProtoUDP
-			startPort, endPort, err = parsePort(sPort)
 		case "icmp":
 			proto = firewall.ProtoICMP
-			startPort = firewall.PortAny
-			endPort = firewall.PortAny
-			if sPort != "" {
-				l.WithField("port", sPort).Warn("ignoring port specification for ICMP firewall rule")
-			}
 		default:
 			return fmt.Errorf("%s rule #%v; proto was not understood; `%s`", table, i, r.Proto)
 		}
-		if err != nil {
-			return fmt.Errorf("%s rule #%v; %s %s", table, i, errPort, err)
-		}
 
 		if r.Cidr != "" && r.Cidr != "any" {
 			_, err = netip.ParsePrefix(r.Cidr)
@@ -480,7 +467,7 @@ func (f *Firewall) metrics(incoming bool) firewallMetrics {
 	}
 }
 
-// Destroy cleans up any known cyclical references so the object can be freed by GC. This should be called if a new
+// Destroy cleans up any known cyclical references so the object can be free'd my GC. This should be called if a new
 // firewall object is created
 func (f *Firewall) Destroy() {
 	//TODO: clean references if/when needed
@@ -673,13 +660,6 @@ func (fp firewallPort) match(p firewall.Packet, incoming bool, c *cert.CachedCer
 		return false
 	}
 
-	// this branch is here to catch traffic from FirewallTable.Any.match and FirewallTable.ICMP.match
-	if p.Protocol == firewall.ProtoICMP || p.Protocol == firewall.ProtoICMPv6 {
-		// port numbers are re-used for connection tracking of ICMP,
-		// but we don't want to actually filter on them.
-		return fp[firewall.PortAny].match(p, c, caPool)
-	}
-
 	var port int32
 
 	if p.Fragment {
@@ -824,8 +804,10 @@ func (fr *FirewallRule) isAny(groups []string, host string, cidr string) bool {
 		return true
 	}
 
-	if slices.Contains(groups, "any") {
-		return true
+	for _, group := range groups {
+		if group == "any" {
+			return true
+		}
 	}
 
 	if host == "any" {
@@ -1036,56 +1018,54 @@ func (r *rule) sanity() error {
 		}
 	}
 
-	if r.Code != "" {
-		return fmt.Errorf("code specified as [%s]. Support for 'code' will be dropped in a future release, as it has never been functional", r.Code)
-	}
-
 	//todo alert on cidr-any
 
 	return nil
 }
 
-func parsePort(s string) (int32, int32, error) {
-	var err error
-	const notAPort int32 = -2
+func parsePort(s string) (startPort, endPort int32, err error) {
 	if s == "any" {
-		return firewall.PortAny, firewall.PortAny, nil
-	}
-	if s == "fragment" {
-		return firewall.PortFragment, firewall.PortFragment, nil
-	}
-	if !strings.Contains(s, `-`) {
+		startPort = firewall.PortAny
+		endPort = firewall.PortAny
+
+	} else if s == "fragment" {
+		startPort = firewall.PortFragment
+		endPort = firewall.PortFragment
+
+	} else if strings.Contains(s, `-`) {
+		sPorts := strings.SplitN(s, `-`, 2)
+		sPorts[0] = strings.Trim(sPorts[0], " ")
+		sPorts[1] = strings.Trim(sPorts[1], " ")
+
+		if len(sPorts) != 2 || sPorts[0] == "" || sPorts[1] == "" {
+			return 0, 0, fmt.Errorf("appears to be a range but could not be parsed; `%s`", s)
+		}
+
+		rStartPort, err := strconv.Atoi(sPorts[0])
+		if err != nil {
+			return 0, 0, fmt.Errorf("beginning range was not a number; `%s`", sPorts[0])
+		}
+
+		rEndPort, err := strconv.Atoi(sPorts[1])
+		if err != nil {
+			return 0, 0, fmt.Errorf("ending range was not a number; `%s`", sPorts[1])
+		}
+
+		startPort = int32(rStartPort)
+		endPort = int32(rEndPort)
+
+		if startPort == firewall.PortAny {
+			endPort = firewall.PortAny
+		}
+
+	} else {
 		rPort, err := strconv.Atoi(s)
 		if err != nil {
-			return notAPort, notAPort, fmt.Errorf("was not a number; `%s`", s)
+			return 0, 0, fmt.Errorf("was not a number; `%s`", s)
 		}
-		return int32(rPort), int32(rPort), nil
+		startPort = int32(rPort)
+		endPort = startPort
 	}
 
-	sPorts := strings.SplitN(s, `-`, 2)
-	for i := range sPorts {
-		sPorts[i] = strings.Trim(sPorts[i], " ")
-	}
-	if len(sPorts) != 2 || sPorts[0] == "" || sPorts[1] == "" {
-		return notAPort, notAPort, fmt.Errorf("appears to be a range but could not be parsed; `%s`", s)
-	}
-
-	rStartPort, err := strconv.Atoi(sPorts[0])
-	if err != nil {
-		return notAPort, notAPort, fmt.Errorf("beginning range was not a number; `%s`", sPorts[0])
-	}
-
-	rEndPort, err := strconv.Atoi(sPorts[1])
-	if err != nil {
-		return notAPort, notAPort, fmt.Errorf("ending range was not a number; `%s`", sPorts[1])
-	}
-
-	startPort := int32(rStartPort)
-	endPort := int32(rEndPort)
-
-	if startPort == firewall.PortAny {
-		endPort = firewall.PortAny
-	}
-
-	return startPort, endPort, nil
+	return
 }

firewall/packet.go

@@ -22,10 +22,7 @@ const (
 type Packet struct {
 	LocalAddr  netip.Addr
 	RemoteAddr netip.Addr
-	// LocalPort is the destination port for incoming traffic, or the source port for outgoing. Zero for ICMP.
-	LocalPort uint16
-	// RemotePort is the source port for incoming traffic, or the destination port for outgoing.
-	// For ICMP, it's the "identifier". This is only used for connection tracking, actual firewall rules will not filter on ICMP identifier
+	LocalPort  uint16
 	RemotePort uint16
 	Protocol   uint8
 	Fragment   bool
@@ -49,8 +46,6 @@ func (fp Packet) MarshalJSON() ([]byte, error) {
 		proto = "tcp"
 	case ProtoICMP:
 		proto = "icmp"
-	case ProtoICMPv6:
-		proto = "icmpv6"
 	case ProtoUDP:
 		proto = "udp"
 	default:

firewall_test.go

@@ -87,10 +87,9 @@ func TestFirewall_AddRule(t *testing.T) {
 
 	fw = NewFirewall(l, time.Second, time.Minute, time.Hour, c)
 	require.NoError(t, fw.AddRule(true, firewall.ProtoICMP, 1, 1, []string{}, "h1", "", "", "", ""))
-	//no matter what port is given for icmp, it should end up as "any"
-	assert.Nil(t, fw.InRules.ICMP[firewall.PortAny].Any.Any)
-	assert.Empty(t, fw.InRules.ICMP[firewall.PortAny].Any.Groups)
-	assert.Contains(t, fw.InRules.ICMP[firewall.PortAny].Any.Hosts, "h1")
+	assert.Nil(t, fw.InRules.ICMP[1].Any.Any)
+	assert.Empty(t, fw.InRules.ICMP[1].Any.Groups)
+	assert.Contains(t, fw.InRules.ICMP[1].Any.Hosts, "h1")
 
 	fw = NewFirewall(l, time.Second, time.Minute, time.Hour, c)
 	require.NoError(t, fw.AddRule(false, firewall.ProtoAny, 1, 1, []string{}, "", ti.String(), "", "", ""))
@@ -735,150 +734,6 @@ func TestFirewall_DropConntrackReload(t *testing.T) {
 	assert.Equal(t, fw.Drop(p, false, &h, cp, nil), ErrNoMatchingRule)
 }
 
-func TestFirewall_ICMPPortBehavior(t *testing.T) {
-	l := test.NewLogger()
-	ob := &bytes.Buffer{}
-	l.SetOutput(ob)
-	myVpnNetworksTable := new(bart.Lite)
-	myVpnNetworksTable.Insert(netip.MustParsePrefix("1.1.1.1/8"))
-
-	network := netip.MustParsePrefix("1.2.3.4/24")
-
-	c := cert.CachedCertificate{
-		Certificate: &dummyCert{
-			name:     "host1",
-			networks: []netip.Prefix{network},
-			groups:   []string{"default-group"},
-			issuer:   "signer-shasum",
-		},
-		InvertedGroups: map[string]struct{}{"default-group": {}},
-	}
-	h := HostInfo{
-		ConnectionState: &ConnectionState{
-			peerCert: &c,
-		},
-		vpnAddrs: []netip.Addr{network.Addr()},
-	}
-	h.buildNetworks(myVpnNetworksTable, c.Certificate)
-
-	cp := cert.NewCAPool()
-
-	templ := firewall.Packet{
-		LocalAddr:  netip.MustParseAddr("1.2.3.4"),
-		RemoteAddr: netip.MustParseAddr("1.2.3.4"),
-		Protocol:   firewall.ProtoICMP,
-		Fragment:   false,
-	}
-
-	t.Run("ICMP allowed", func(t *testing.T) {
-		fw := NewFirewall(l, time.Second, time.Minute, time.Hour, c.Certificate)
-		require.NoError(t, fw.AddRule(true, firewall.ProtoICMP, 0, 0, []string{"any"}, "", "", "", "", ""))
-		t.Run("zero ports", func(t *testing.T) {
-			p := templ.Copy()
-			p.LocalPort = 0
-			p.RemotePort = 0
-			// Drop outbound
-			assert.Equal(t, fw.Drop(*p, false, &h, cp, nil), ErrNoMatchingRule)
-			// Allow inbound
-			resetConntrack(fw)
-			require.NoError(t, fw.Drop(*p, true, &h, cp, nil))
-			//now also allow outbound
-			require.NoError(t, fw.Drop(*p, false, &h, cp, nil))
-		})
-
-		t.Run("nonzero ports", func(t *testing.T) {
-			p := templ.Copy()
-			p.LocalPort = 0xabcd
-			p.RemotePort = 0x1234
-			// Drop outbound
-			assert.Equal(t, fw.Drop(*p, false, &h, cp, nil), ErrNoMatchingRule)
-			// Allow inbound
-			resetConntrack(fw)
-			require.NoError(t, fw.Drop(*p, true, &h, cp, nil))
-			//now also allow outbound
-			require.NoError(t, fw.Drop(*p, false, &h, cp, nil))
-		})
-	})
-
-	t.Run("Any proto, some ports allowed", func(t *testing.T) {
-		fw := NewFirewall(l, time.Second, time.Minute, time.Hour, c.Certificate)
-		require.NoError(t, fw.AddRule(true, firewall.ProtoAny, 80, 444, []string{"any"}, "", "", "", "", ""))
-		t.Run("zero ports, still blocked", func(t *testing.T) {
-			p := templ.Copy()
-			p.LocalPort = 0
-			p.RemotePort = 0
-			// Drop outbound
-			assert.Equal(t, fw.Drop(*p, false, &h, cp, nil), ErrNoMatchingRule)
-			// Allow inbound
-			resetConntrack(fw)
-			assert.Equal(t, fw.Drop(*p, true, &h, cp, nil), ErrNoMatchingRule)
-			//now also allow outbound
-			assert.Equal(t, fw.Drop(*p, false, &h, cp, nil), ErrNoMatchingRule)
-		})
-
-		t.Run("nonzero ports, still blocked", func(t *testing.T) {
-			p := templ.Copy()
-			p.LocalPort = 0xabcd
-			p.RemotePort = 0x1234
-			// Drop outbound
-			assert.Equal(t, fw.Drop(*p, false, &h, cp, nil), ErrNoMatchingRule)
-			// Allow inbound
-			resetConntrack(fw)
-			assert.Equal(t, fw.Drop(*p, true, &h, cp, nil), ErrNoMatchingRule)
-			//now also allow outbound
-			assert.Equal(t, fw.Drop(*p, false, &h, cp, nil), ErrNoMatchingRule)
-		})
-
-		t.Run("nonzero, matching ports, still blocked", func(t *testing.T) {
-			p := templ.Copy()
-			p.LocalPort = 80
-			p.RemotePort = 80
-			// Drop outbound
-			assert.Equal(t, fw.Drop(*p, false, &h, cp, nil), ErrNoMatchingRule)
-			// Allow inbound
-			resetConntrack(fw)
-			assert.Equal(t, fw.Drop(*p, true, &h, cp, nil), ErrNoMatchingRule)
-			//now also allow outbound
-			assert.Equal(t, fw.Drop(*p, false, &h, cp, nil), ErrNoMatchingRule)
-		})
-	})
-	t.Run("Any proto, any port", func(t *testing.T) {
-		fw := NewFirewall(l, time.Second, time.Minute, time.Hour, c.Certificate)
-		require.NoError(t, fw.AddRule(true, firewall.ProtoAny, 0, 0, []string{"any"}, "", "", "", "", ""))
-		t.Run("zero ports, allowed", func(t *testing.T) {
-			resetConntrack(fw)
-			p := templ.Copy()
-			p.LocalPort = 0
-			p.RemotePort = 0
-			// Drop outbound
-			assert.Equal(t, fw.Drop(*p, false, &h, cp, nil), ErrNoMatchingRule)
-			// Allow inbound
-			resetConntrack(fw)
-			require.NoError(t, fw.Drop(*p, true, &h, cp, nil))
-			//now also allow outbound
-			require.NoError(t, fw.Drop(*p, false, &h, cp, nil))
-		})
-
-		t.Run("nonzero ports, allowed", func(t *testing.T) {
-			resetConntrack(fw)
-			p := templ.Copy()
-			p.LocalPort = 0xabcd
-			p.RemotePort = 0x1234
-			// Drop outbound
-			assert.Equal(t, fw.Drop(*p, false, &h, cp, nil), ErrNoMatchingRule)
-			// Allow inbound
-			resetConntrack(fw)
-			require.NoError(t, fw.Drop(*p, true, &h, cp, nil))
-			//now also allow outbound
-			require.NoError(t, fw.Drop(*p, false, &h, cp, nil))
-			//different ID is blocked
-			p.RemotePort++
-			require.Equal(t, fw.Drop(*p, false, &h, cp, nil), ErrNoMatchingRule)
-		})
-	})
-
-}
-
 func TestFirewall_DropIPSpoofing(t *testing.T) {
 	l := test.NewLogger()
 	ob := &bytes.Buffer{}
@@ -1064,11 +919,11 @@ func TestNewFirewallFromConfig(t *testing.T) {
 
 	// Test code/port error
 	conf = config.NewC(l)
-	conf.Settings["firewall"] = map[string]any{"outbound": []any{map[string]any{"code": "a", "host": "testh", "proto": "any"}}}
+	conf.Settings["firewall"] = map[string]any{"outbound": []any{map[string]any{"code": "a", "host": "testh"}}}
 	_, err = NewFirewallFromConfig(l, cs, conf)
 	require.EqualError(t, err, "firewall.outbound rule #0; code was not a number; `a`")
 
-	conf.Settings["firewall"] = map[string]any{"outbound": []any{map[string]any{"port": "a", "host": "testh", "proto": "any"}}}
+	conf.Settings["firewall"] = map[string]any{"outbound": []any{map[string]any{"port": "a", "host": "testh"}}}
 	_, err = NewFirewallFromConfig(l, cs, conf)
 	require.EqualError(t, err, "firewall.outbound rule #0; port was not a number; `a`")
 
@@ -1118,14 +973,7 @@ func TestAddFirewallRulesFromConfig(t *testing.T) {
 	mf = &mockFirewall{}
 	conf.Settings["firewall"] = map[string]any{"outbound": []any{map[string]any{"port": "1", "proto": "icmp", "host": "a"}}}
 	require.NoError(t, AddFirewallRulesFromConfig(l, false, conf, mf))
-	assert.Equal(t, addRuleCall{incoming: false, proto: firewall.ProtoICMP, startPort: firewall.PortAny, endPort: firewall.PortAny, groups: nil, host: "a", ip: "", localIp: ""}, mf.lastCall)
-
-	// Test adding icmp rule no port
-	conf = config.NewC(l)
-	mf = &mockFirewall{}
-	conf.Settings["firewall"] = map[string]any{"outbound": []any{map[string]any{"proto": "icmp", "host": "a"}}}
-	require.NoError(t, AddFirewallRulesFromConfig(l, false, conf, mf))
-	assert.Equal(t, addRuleCall{incoming: false, proto: firewall.ProtoICMP, startPort: firewall.PortAny, endPort: firewall.PortAny, groups: nil, host: "a", ip: "", localIp: ""}, mf.lastCall)
+	assert.Equal(t, addRuleCall{incoming: false, proto: firewall.ProtoICMP, startPort: 1, endPort: 1, groups: nil, host: "a", ip: "", localIp: ""}, mf.lastCall)
 
 	// Test adding any rule
 	conf = config.NewC(l)

go.mod

@@ -4,7 +4,6 @@ go 1.25
 
 require (
 	dario.cat/mergo v1.0.2
-	filippo.io/bigmod v0.1.0
 	github.com/anmitsu/go-shlex v0.0.0-20200514113438-38f4b401e2be
 	github.com/armon/go-radix v1.0.0
 	github.com/cyberdelia/go-metrics-graphite v0.0.0-20161219230853-39f87cc3b432

go.sum

@@ -1,8 +1,6 @@
 cloud.google.com/go v0.34.0/go.mod h1:aQUYkXzVsufM+DwF1aE+0xfcU+56JwCaLick0ClmMTw=
 dario.cat/mergo v1.0.2 h1:85+piFYR1tMbRrLcDwR18y4UKJ3aH1Tbzi24VRW1TK8=
 dario.cat/mergo v1.0.2/go.mod h1:E/hbnu0NxMFBjpMIE34DRGLWqDy0g5FuKDhCb31ngxA=
-filippo.io/bigmod v0.1.0 h1:UNzDk7y9ADKST+axd9skUpBQeW7fG2KrTZyOE4uGQy8=
-filippo.io/bigmod v0.1.0/go.mod h1:OjOXDNlClLblvXdwgFFOQFJEocLhhtai8vGLy0JCZlI=
 github.com/alecthomas/template v0.0.0-20160405071501-a0175ee3bccc/go.mod h1:LOuyumcjzFXgccqObfd/Ljyb9UuFJ6TxHnclSeseNhc=
 github.com/alecthomas/template v0.0.0-20190718012654-fb15b899a751/go.mod h1:LOuyumcjzFXgccqObfd/Ljyb9UuFJ6TxHnclSeseNhc=
 github.com/alecthomas/units v0.0.0-20151022065526-2efee857e7cf/go.mod h1:ybxpYRFXyAe+OPACYpWeL0wqObRcbAqCMya13uyzqw0=

handshake_manager.go

@@ -23,25 +23,22 @@ const (
 	DefaultHandshakeRetries       = 10
 	DefaultHandshakeTriggerBuffer = 64
 	DefaultUseRelays              = true
-	DefaultMaxHandshakeRate       = 0 // 0 means unlimited
 )
 
 var (
 	defaultHandshakeConfig = HandshakeConfig{
-		tryInterval:      DefaultHandshakeTryInterval,
-		retries:          DefaultHandshakeRetries,
-		triggerBuffer:    DefaultHandshakeTriggerBuffer,
-		useRelays:        DefaultUseRelays,
-		maxHandshakeRate: DefaultMaxHandshakeRate,
+		tryInterval:   DefaultHandshakeTryInterval,
+		retries:       DefaultHandshakeRetries,
+		triggerBuffer: DefaultHandshakeTriggerBuffer,
+		useRelays:     DefaultUseRelays,
 	}
 )
 
 type HandshakeConfig struct {
-	tryInterval      time.Duration
-	retries          int64
-	triggerBuffer    int
-	useRelays        bool
-	maxHandshakeRate int
+	tryInterval   time.Duration
+	retries       int64
+	triggerBuffer int
+	useRelays     bool
 
 	messageMetrics *MessageMetrics
 }
@@ -61,15 +58,9 @@ type HandshakeManager struct {
 	messageMetrics         *MessageMetrics
 	metricInitiated        metrics.Counter
 	metricTimedOut         metrics.Counter
-	metricRateLimited      metrics.Counter
 	f                      *Interface
 	l                      *logrus.Logger
 
-	// Rate limiting for new handshakes (token bucket)
-	rateBucket   int // tokens currently available
-	rateMax      int // max tokens (== max handshakes per second), 0 means unlimited
-	rateLastTick time.Time
-
 	// can be used to trigger outbound handshake for the given vpnIp
 	trigger chan netip.Addr
 }
@@ -125,41 +116,10 @@ func NewHandshakeManager(l *logrus.Logger, mainHostMap *HostMap, lightHouse *Lig
 		messageMetrics:         config.messageMetrics,
 		metricInitiated:        metrics.GetOrRegisterCounter("handshake_manager.initiated", nil),
 		metricTimedOut:         metrics.GetOrRegisterCounter("handshake_manager.timed_out", nil),
-		metricRateLimited:      metrics.GetOrRegisterCounter("handshake_manager.rate_limited", nil),
-		rateBucket:             config.maxHandshakeRate,
-		rateMax:                config.maxHandshakeRate,
-		rateLastTick:           time.Now(),
 		l:                      l,
 	}
 }
 
-// handshakeRateAllow checks the token bucket rate limiter and returns true if a
-// new handshake is allowed. Must be called with hm.Lock held.
-func (hm *HandshakeManager) handshakeRateAllow(now time.Time) bool {
-	if hm.rateMax == 0 {
-		return true
-	}
-
-	// Refill tokens based on elapsed time
-	elapsed := now.Sub(hm.rateLastTick)
-	if elapsed >= time.Second {
-		// Add tokens for full seconds elapsed
-		tokens := int(elapsed/time.Second) * hm.rateMax
-		hm.rateBucket += tokens
-		if hm.rateBucket > hm.rateMax {
-			hm.rateBucket = hm.rateMax
-		}
-		hm.rateLastTick = now
-	}
-
-	if hm.rateBucket > 0 {
-		hm.rateBucket--
-		return true
-	}
-
-	return false
-}
-
 func (hm *HandshakeManager) Run(ctx context.Context) {
 	clockSource := time.NewTicker(hm.config.tryInterval)
 	defer clockSource.Stop()
@@ -189,15 +149,6 @@ func (hm *HandshakeManager) HandleIncoming(via ViaSender, packet []byte, h *head
 	case header.HandshakeIXPSK0:
 		switch h.MessageCounter {
 		case 1:
-			// Check rate limit for new incoming handshakes
-			hm.Lock()
-			allowed := hm.handshakeRateAllow(time.Now())
-			hm.Unlock()
-			if !allowed {
-				hm.metricRateLimited.Inc(1)
-				hm.l.WithField("from", via).Debug("Handshake rate limit reached, dropping incoming handshake")
-				return
-			}
 			ixHandshakeStage1(hm.f, via, packet, h)
 
 		case 2:
@@ -639,7 +590,7 @@ func (hm *HandshakeManager) allocateIndex(hh *HandshakeHostInfo) error {
 	hm.Lock()
 	defer hm.Unlock()
 
-	for range 32 {
+	for i := 0; i < 32; i++ {
 		index, err := generateIndex(hm.l)
 		if err != nil {
 			return err

handshake_manager_test.go

@@ -65,68 +65,6 @@ func Test_NewHandshakeManagerVpnIp(t *testing.T) {
 	assert.NotContains(t, blah.vpnIps, ip)
 }
 
-func Test_HandshakeManagerRateLimit(t *testing.T) {
-	l := test.NewLogger()
-	localrange := netip.MustParsePrefix("10.1.1.1/24")
-	preferredRanges := []netip.Prefix{localrange}
-	mainHM := newHostMap(l)
-	mainHM.preferredRanges.Store(&preferredRanges)
-
-	lh := newTestLighthouse()
-
-	config := defaultHandshakeConfig
-	config.maxHandshakeRate = 2
-
-	hm := NewHandshakeManager(l, mainHM, lh, &udp.NoopConn{}, config)
-	hm.f = &Interface{handshakeManager: hm, pki: &PKI{}, l: l}
-
-	now := time.Now()
-
-	// Should allow up to maxHandshakeRate handshakes
-	hm.Lock()
-	assert.True(t, hm.handshakeRateAllow(now), "first handshake should be allowed")
-	assert.True(t, hm.handshakeRateAllow(now), "second handshake should be allowed")
-	assert.False(t, hm.handshakeRateAllow(now), "third handshake should be rate limited")
-	hm.Unlock()
-
-	// After advancing time by 1 second, tokens should refill
-	hm.Lock()
-	assert.True(t, hm.handshakeRateAllow(now.Add(time.Second)), "handshake should be allowed after token refill")
-	hm.Unlock()
-}
-
-func Test_HandshakeManagerRateLimitUnlimited(t *testing.T) {
-	l := test.NewLogger()
-	localrange := netip.MustParsePrefix("10.1.1.1/24")
-	preferredRanges := []netip.Prefix{localrange}
-	mainHM := newHostMap(l)
-	mainHM.preferredRanges.Store(&preferredRanges)
-
-	lh := newTestLighthouse()
-
-	cs := &CertState{
-		initiatingVersion: cert.Version1,
-		privateKey:        []byte{},
-		v1Cert:            &dummyCert{version: cert.Version1},
-		v1HandshakeBytes:  []byte{},
-	}
-
-	// Default config has maxHandshakeRate=0 (unlimited)
-	hm := NewHandshakeManager(l, mainHM, lh, &udp.NoopConn{}, defaultHandshakeConfig)
-	hm.f = &Interface{handshakeManager: hm, pki: &PKI{}, l: l}
-	hm.f.pki.cs.Store(cs)
-
-	// Should allow many handshakes with no limit
-	// Limited to 10 due to test lighthouse query channel buffer
-	for i := 0; i < 10; i++ {
-		ip := netip.MustParseAddr("172.1.1.1").As16()
-		ip[15] = byte(i + 1)
-		addr := netip.AddrFrom16(ip)
-		h := hm.StartHandshake(addr, nil)
-		assert.NotNil(t, h, "handshake %d should be allowed with unlimited rate", i)
-	}
-}
-
 func testCountTimerWheelEntries(tw *LockingTimerWheel[netip.Addr]) (c int) {
 	for _, i := range tw.t.wheel {
 		n := i.Head

hostmap_tester.go

@@ -1,4 +1,5 @@
 //go:build e2e_testing
+// +build e2e_testing
 
 package nebula
 

inside.go

@@ -9,8 +9,75 @@ import (
 	"github.com/slackhq/nebula/iputil"
 	"github.com/slackhq/nebula/noiseutil"
 	"github.com/slackhq/nebula/routing"
+	"github.com/slackhq/nebula/udp"
 )
 
+// consumeInsidePacketBatched is a variant of consumeInsidePacket that queues
+// outgoing packets into pendingPackets instead of sending them immediately.
+// The caller is responsible for flushing pendingPackets with WriteBatch.
+func (f *Interface) consumeInsidePacketBatched(packet []byte, fwPacket *firewall.Packet, nb, out []byte, q int, localCache firewall.ConntrackCache, pendingPackets *[]udp.BatchPacket) {
+	err := newPacket(packet, false, fwPacket)
+	if err != nil {
+		if f.l.Level >= logrus.DebugLevel {
+			f.l.WithField("packet", packet).Debugf("Error while validating outbound packet: %s", err)
+		}
+		return
+	}
+
+	// Ignore local broadcast packets
+	if f.dropLocalBroadcast {
+		if f.myBroadcastAddrsTable.Contains(fwPacket.RemoteAddr) {
+			return
+		}
+	}
+
+	if f.myVpnAddrsTable.Contains(fwPacket.RemoteAddr) {
+		if immediatelyForwardToSelf {
+			_, err := f.readers[q].Write(packet)
+			if err != nil {
+				f.l.WithError(err).Error("Failed to forward to tun")
+			}
+		}
+		return
+	}
+
+	// Ignore multicast packets
+	if f.dropMulticast && fwPacket.RemoteAddr.IsMulticast() {
+		return
+	}
+
+	hostinfo, ready := f.getOrHandshakeConsiderRouting(fwPacket, func(hh *HandshakeHostInfo) {
+		hh.cachePacket(f.l, header.Message, 0, packet, f.sendMessageNow, f.cachedPacketMetrics)
+	})
+
+	if hostinfo == nil {
+		f.rejectInside(packet, out, q)
+		if f.l.Level >= logrus.DebugLevel {
+			f.l.WithField("vpnAddr", fwPacket.RemoteAddr).
+				WithField("fwPacket", fwPacket).
+				Debugln("dropping outbound packet, vpnAddr not in our vpn networks or in unsafe networks")
+		}
+		return
+	}
+
+	if !ready {
+		return
+	}
+
+	dropReason := f.firewall.Drop(*fwPacket, false, hostinfo, f.pki.GetCAPool(), localCache)
+	if dropReason == nil {
+		f.sendNoMetricsBatched(header.Message, 0, hostinfo.ConnectionState, hostinfo, netip.AddrPort{}, packet, nb, out, q, pendingPackets)
+	} else {
+		f.rejectInside(packet, out, q)
+		if f.l.Level >= logrus.DebugLevel {
+			hostinfo.logger(f.l).
+				WithField("fwPacket", fwPacket).
+				WithField("reason", dropReason).
+				Debugln("dropping outbound packet")
+		}
+	}
+}
+
 func (f *Interface) consumeInsidePacket(packet []byte, fwPacket *firewall.Packet, nb, out []byte, q int, localCache firewall.ConntrackCache) {
 	err := newPacket(packet, false, fwPacket)
 	if err != nil {
@@ -69,7 +136,6 @@ func (f *Interface) consumeInsidePacket(packet []byte, fwPacket *firewall.Packet
 	dropReason := f.firewall.Drop(*fwPacket, false, hostinfo, f.pki.GetCAPool(), localCache)
 	if dropReason == nil {
 		f.sendNoMetrics(header.Message, 0, hostinfo.ConnectionState, hostinfo, netip.AddrPort{}, packet, nb, out, q)
-
 	} else {
 		f.rejectInside(packet, out, q)
 		if f.l.Level >= logrus.DebugLevel {
@@ -410,3 +476,75 @@ func (f *Interface) sendNoMetrics(t header.MessageType, st header.MessageSubType
 		}
 	}
 }
+
+// sendNoMetricsBatched is like sendNoMetrics but queues the packet for batched sending
+// instead of sending immediately. The caller must flush pendingPackets with WriteBatch.
+func (f *Interface) sendNoMetricsBatched(t header.MessageType, st header.MessageSubType, ci *ConnectionState, hostinfo *HostInfo, remote netip.AddrPort, p, nb, out []byte, q int, pendingPackets *[]udp.BatchPacket) {
+	if ci.eKey == nil {
+		return
+	}
+	useRelay := !remote.IsValid() && !hostinfo.remote.IsValid()
+	fullOut := out
+
+	if useRelay {
+		if len(out) < header.Len {
+			out = out[:header.Len]
+		}
+		out = out[header.Len:]
+	}
+
+	if noiseutil.EncryptLockNeeded {
+		ci.writeLock.Lock()
+	}
+	c := ci.messageCounter.Add(1)
+
+	out = header.Encode(out, header.Version, t, st, hostinfo.remoteIndexId, c)
+	f.connectionManager.Out(hostinfo)
+
+	if t != header.CloseTunnel && hostinfo.lastRebindCount != f.rebindCount {
+		f.lightHouse.QueryServer(hostinfo.vpnAddrs[0])
+		hostinfo.lastRebindCount = f.rebindCount
+		if f.l.Level >= logrus.DebugLevel {
+			f.l.WithField("vpnAddrs", hostinfo.vpnAddrs).Debug("Lighthouse update triggered for punch due to rebind counter")
+		}
+	}
+
+	var err error
+	out, err = ci.eKey.EncryptDanger(out, out, p, c, nb)
+	if noiseutil.EncryptLockNeeded {
+		ci.writeLock.Unlock()
+	}
+	if err != nil {
+		hostinfo.logger(f.l).WithError(err).
+			WithField("udpAddr", remote).WithField("counter", c).
+			WithField("attemptedCounter", c).
+			Error("Failed to encrypt outgoing packet")
+		return
+	}
+
+	// Queue the packet for batched sending
+	var addr netip.AddrPort
+	if remote.IsValid() {
+		addr = remote
+	} else if hostinfo.remote.IsValid() {
+		addr = hostinfo.remote
+	} else {
+		// Relay path - send immediately, not batched
+		for _, relayIP := range hostinfo.relayState.CopyRelayIps() {
+			relayHostInfo, relay, err := f.hostMap.QueryVpnAddrsRelayFor(hostinfo.vpnAddrs, relayIP)
+			if err != nil {
+				hostinfo.relayState.DeleteRelay(relayIP)
+				hostinfo.logger(f.l).WithField("relay", relayIP).WithError(err).Info("sendNoMetricsBatched failed to find HostInfo")
+				continue
+			}
+			f.SendVia(relayHostInfo, relay, out, nb, fullOut[:header.Len+len(out)], true)
+			break
+		}
+		return
+	}
+
+	// Copy the payload since the buffer will be reused
+	payload := make([]byte, len(out))
+	copy(payload, out)
+	*pendingPackets = append(*pendingPackets, udp.BatchPacket{Payload: payload, Addr: addr})
+}

inside_bsd.go

@@ -1,4 +1,5 @@
 //go:build darwin || dragonfly || freebsd || netbsd || openbsd
+// +build darwin dragonfly freebsd netbsd openbsd
 
 package nebula
 

inside_generic.go

@@ -1,4 +1,5 @@
 //go:build !darwin && !dragonfly && !freebsd && !netbsd && !openbsd
+// +build !darwin,!dragonfly,!freebsd,!netbsd,!openbsd
 
 package nebula
 

interface.go

@@ -48,6 +48,8 @@ type InterfaceConfig struct {
 
 	ConntrackCacheTimeout time.Duration
 	l                     *logrus.Logger
+
+	tunBatchSize int // batch size for TUN read/write batching, 0 to disable
 }
 
 type Interface struct {
@@ -86,8 +88,9 @@ type Interface struct {
 
 	conntrackCacheTimeout time.Duration
 
-	writers []udp.Conn
-	readers []io.ReadWriteCloser
+	writers      []udp.Conn
+	readers      []io.ReadWriteCloser
+	tunBatchSize int // batch size for TUN read/write batching
 
 	metricHandshakes    metrics.Histogram
 	messageMetrics      *MessageMetrics
@@ -187,6 +190,7 @@ func NewInterface(ctx context.Context, c *InterfaceConfig) (*Interface, error) {
 		relayManager:          c.relayManager,
 		connectionManager:     c.connectionManager,
 		conntrackCacheTimeout: c.ConntrackCacheTimeout,
+		tunBatchSize:          c.tunBatchSize,
 
 		metricHandshakes: metrics.GetOrRegisterHistogram("handshakes", nil, metrics.NewExpDecaySample(1028, 0.015)),
 		messageMetrics:   c.MessageMetrics,
@@ -244,6 +248,15 @@ func (f *Interface) activate() {
 		f.readers[i] = reader
 	}
 
+	// Enable batch reading on all readers if batch size > 1
+	if f.tunBatchSize > 1 {
+		for i := 0; i < f.routines; i++ {
+			if err := overlay.EnableBatchReading(f.readers[i]); err != nil {
+				f.l.WithError(err).WithField("routine", i).Warn("Failed to enable batch reading, falling back to single reads")
+			}
+		}
+	}
+
 	if err := f.inside.Activate(); err != nil {
 		f.inside.Close()
 		f.l.Fatal(err)
@@ -287,13 +300,21 @@ func (f *Interface) listenOut(i int) {
 func (f *Interface) listenIn(reader io.ReadWriteCloser, i int) {
 	runtime.LockOSThread()
 
+	conntrackCache := firewall.NewConntrackCacheTicker(f.conntrackCacheTimeout)
+
+	// Check if batch reading is available and enabled
+	batchReader := overlay.AsBatchReader(reader)
+	if batchReader != nil && f.tunBatchSize > 1 {
+		f.listenInBatched(reader, batchReader, i, conntrackCache)
+		return
+	}
+
+	// Fallback to single-packet reading
 	packet := make([]byte, mtu)
 	out := make([]byte, mtu)
 	fwPacket := &firewall.Packet{}
 	nb := make([]byte, 12, 12)
 
-	conntrackCache := firewall.NewConntrackCacheTicker(f.conntrackCacheTimeout)
-
 	for {
 		n, err := reader.Read(packet)
 		if err != nil {
@@ -310,6 +331,54 @@ func (f *Interface) listenIn(reader io.ReadWriteCloser, i int) {
 	}
 }
 
+func (f *Interface) listenInBatched(reader io.ReadWriteCloser, batchReader overlay.BatchReader, i int, conntrackCache *firewall.ConntrackCacheTicker) {
+	batchSize := f.tunBatchSize
+
+	// Pre-allocate buffers for batch reading
+	packets := make([][]byte, batchSize)
+	for j := range packets {
+		packets[j] = make([]byte, mtu)
+	}
+	sizes := make([]int, batchSize)
+
+	// Pre-allocate buffers for packet processing
+	out := make([]byte, mtu)
+	fwPacket := &firewall.Packet{}
+	nb := make([]byte, 12, 12)
+
+	// Pre-allocate buffer for batched UDP writes
+	pendingPackets := make([]udp.BatchPacket, 0, batchSize)
+
+	for {
+		// Read a batch of packets from TUN
+		n, err := batchReader.ReadBatch(packets, sizes)
+		if err != nil {
+			if errors.Is(err, os.ErrClosed) && f.closed.Load() {
+				return
+			}
+
+			f.l.WithError(err).Error("Error while reading outbound packets")
+			os.Exit(2)
+		}
+
+		if n == 0 {
+			continue
+		}
+
+		// Process all packets in the batch
+		cache := conntrackCache.Get(f.l)
+		for j := 0; j < n; j++ {
+			f.consumeInsidePacketBatched(packets[j][:sizes[j]], fwPacket, nb, out, i, cache, &pendingPackets)
+		}
+
+		// Flush all pending UDP writes
+		if len(pendingPackets) > 0 {
+			f.writers[i].WriteBatch(pendingPackets)
+			pendingPackets = pendingPackets[:0]
+		}
+	}
+}
+
 func (f *Interface) RegisterConfigChangeCallbacks(c *config.C) {
 	c.RegisterReloadCallback(f.reloadFirewall)
 	c.RegisterReloadCallback(f.reloadSendRecvError)

lighthouse.go

@@ -713,14 +713,21 @@ func (lh *LightHouse) unlockedShouldAddV6(vpnAddr netip.Addr, to *V6AddrPort) bo
 
 func (lh *LightHouse) IsLighthouseAddr(vpnAddr netip.Addr) bool {
 	l := lh.GetLighthouses()
-	return slices.Contains(l, vpnAddr)
+	for i := range l {
+		if l[i] == vpnAddr {
+			return true
+		}
+	}
+	return false
 }
 
 func (lh *LightHouse) IsAnyLighthouseAddr(vpnAddrs []netip.Addr) bool {
 	l := lh.GetLighthouses()
 	for i := range vpnAddrs {
-		if slices.Contains(l, vpnAddrs[i]) {
-			return true
+		for j := range l {
+			if l[j] == vpnAddrs[i] {
+				return true
+			}
 		}
 	}
 	return false

main.go

@@ -105,7 +105,11 @@ func Main(c *config.C, configTest bool, buildVersion string, logger *logrus.Logg
 		// deprecated and undocumented
 		tunQueues := c.GetInt("tun.routines", 1)
 		udpQueues := c.GetInt("listen.routines", 1)
-		routines = max(tunQueues, udpQueues)
+		if tunQueues > udpQueues {
+			routines = tunQueues
+		} else {
+			routines = udpQueues
+		}
 		if routines != 1 {
 			l.WithField("routines", routines).Warn("Setting tun.routines and listen.routines is deprecated. Use `routines` instead")
 		}
@@ -204,11 +208,10 @@ func Main(c *config.C, configTest bool, buildVersion string, logger *logrus.Logg
 	useRelays := c.GetBool("relay.use_relays", DefaultUseRelays) && !c.GetBool("relay.am_relay", false)
 
 	handshakeConfig := HandshakeConfig{
-		tryInterval:      c.GetDuration("handshakes.try_interval", DefaultHandshakeTryInterval),
-		retries:          int64(c.GetInt("handshakes.retries", DefaultHandshakeRetries)),
-		triggerBuffer:    c.GetInt("handshakes.trigger_buffer", DefaultHandshakeTriggerBuffer),
-		useRelays:        useRelays,
-		maxHandshakeRate: c.GetInt("handshakes.max_rate", DefaultMaxHandshakeRate),
+		tryInterval:   c.GetDuration("handshakes.try_interval", DefaultHandshakeTryInterval),
+		retries:       int64(c.GetInt("handshakes.retries", DefaultHandshakeRetries)),
+		triggerBuffer: c.GetInt("handshakes.trigger_buffer", DefaultHandshakeTriggerBuffer),
+		useRelays:     useRelays,
 
 		messageMetrics: messageMetrics,
 	}
@@ -247,6 +250,7 @@ func Main(c *config.C, configTest bool, buildVersion string, logger *logrus.Logg
 		punchy:                punchy,
 		ConntrackCacheTimeout: conntrackCacheTimeout,
 		l:                     l,
+		tunBatchSize:          c.GetInt("listen.batch", 64),
 	}
 
 	var ifce *Interface

notboring.go

@@ -1,4 +1,5 @@
 //go:build !boringcrypto
+// +build !boringcrypto
 
 package nebula
 

outside.go

@@ -190,13 +190,6 @@ func (f *Interface) readOutsidePackets(via ViaSender, out []byte, packet []byte,
 		if !f.handleEncrypted(ci, via, h) {
 			return
 		}
-		_, err = f.decrypt(hostinfo, h.MessageCounter, out, packet, h, nb)
-		if err != nil {
-			hostinfo.logger(f.l).WithError(err).WithField("from", via).
-				WithField("packet", packet).
-				Error("Failed to decrypt CloseTunnel packet")
-			return
-		}
 
 		hostinfo.logger(f.l).WithField("from", via).
 			Info("Close tunnel received, tearing down.")
@@ -334,29 +327,13 @@ func parseV6(data []byte, incoming bool, fp *firewall.Packet) error {
 		proto := layers.IPProtocol(data[protoAt])
 
 		switch proto {
-		case layers.IPProtocolESP, layers.IPProtocolNoNextHeader:
+		case layers.IPProtocolICMPv6, layers.IPProtocolESP, layers.IPProtocolNoNextHeader:
 			fp.Protocol = uint8(proto)
 			fp.RemotePort = 0
 			fp.LocalPort = 0
 			fp.Fragment = false
 			return nil
 
-		case layers.IPProtocolICMPv6:
-			if dataLen < offset+6 {
-				return ErrIPv6PacketTooShort
-			}
-			fp.Protocol = uint8(proto)
-			fp.LocalPort = 0 //incoming vs outgoing doesn't matter for icmpv6
-			icmptype := data[offset+1]
-			switch icmptype {
-			case layers.ICMPv6TypeEchoRequest, layers.ICMPv6TypeEchoReply:
-				fp.RemotePort = binary.BigEndian.Uint16(data[offset+4 : offset+6]) //identifier
-			default:
-				fp.RemotePort = 0
-			}
-			fp.Fragment = false
-			return nil
-
 		case layers.IPProtocolTCP, layers.IPProtocolUDP:
 			if dataLen < offset+4 {
 				return ErrIPv6PacketTooShort
@@ -446,38 +423,34 @@ func parseV4(data []byte, incoming bool, fp *firewall.Packet) error {
 
 	// Accounting for a variable header length, do we have enough data for our src/dst tuples?
 	minLen := ihl
-	if !fp.Fragment {
-		if fp.Protocol == firewall.ProtoICMP {
-			minLen += minFwPacketLen + 2
-		} else {
-			minLen += minFwPacketLen
-		}
+	if !fp.Fragment && fp.Protocol != firewall.ProtoICMP {
+		minLen += minFwPacketLen
 	}
-
 	if len(data) < minLen {
 		return ErrIPv4InvalidHeaderLength
 	}
 
-	if incoming { // Firewall packets are locally oriented
+	// Firewall packets are locally oriented
+	if incoming {
 		fp.RemoteAddr, _ = netip.AddrFromSlice(data[12:16])
 		fp.LocalAddr, _ = netip.AddrFromSlice(data[16:20])
+		if fp.Fragment || fp.Protocol == firewall.ProtoICMP {
+			fp.RemotePort = 0
+			fp.LocalPort = 0
+		} else {
+			fp.RemotePort = binary.BigEndian.Uint16(data[ihl : ihl+2])
+			fp.LocalPort = binary.BigEndian.Uint16(data[ihl+2 : ihl+4])
+		}
 	} else {
 		fp.LocalAddr, _ = netip.AddrFromSlice(data[12:16])
 		fp.RemoteAddr, _ = netip.AddrFromSlice(data[16:20])
-	}
-
-	if fp.Fragment {
-		fp.RemotePort = 0
-		fp.LocalPort = 0
-	} else if fp.Protocol == firewall.ProtoICMP { //note that orientation doesn't matter on ICMP
-		fp.RemotePort = binary.BigEndian.Uint16(data[ihl+4 : ihl+6]) //identifier
-		fp.LocalPort = 0                                             //code would be uint16(data[ihl+1])
-	} else if incoming {
-		fp.RemotePort = binary.BigEndian.Uint16(data[ihl : ihl+2])  //src port
-		fp.LocalPort = binary.BigEndian.Uint16(data[ihl+2 : ihl+4]) //dst port
-	} else {
-		fp.LocalPort = binary.BigEndian.Uint16(data[ihl : ihl+2])    //src port
-		fp.RemotePort = binary.BigEndian.Uint16(data[ihl+2 : ihl+4]) //dst port
+		if fp.Fragment || fp.Protocol == firewall.ProtoICMP {
+			fp.RemotePort = 0
+			fp.LocalPort = 0
+		} else {
+			fp.LocalPort = binary.BigEndian.Uint16(data[ihl : ihl+2])
+			fp.RemotePort = binary.BigEndian.Uint16(data[ihl+2 : ihl+4])
+		}
 	}
 
 	return nil

outside_test.go

@@ -155,7 +155,6 @@ func Test_newPacket_v6(t *testing.T) {
 	// next layer, missing length byte
 	err = newPacket(buffer.Bytes()[:49], true, p)
 	require.ErrorIs(t, err, ErrIPv6CouldNotFindPayload)
-	err = nil
 
 	// A good ICMP packet
 	ip = layers.IPv6{
@@ -166,26 +165,20 @@ func Test_newPacket_v6(t *testing.T) {
 		DstIP:      net.IPv6linklocalallnodes,
 	}
 
-	icmp := layers.ICMPv6{
-		TypeCode: layers.ICMPv6TypeEchoRequest,
-		Checksum: 0x1234,
-	}
+	icmp := layers.ICMPv6{}
 
 	buffer.Clear()
-	require.NoError(t, gopacket.SerializeLayers(buffer, opt, &ip, &icmp))
-	require.Error(t, newPacket(buffer.Bytes(), true, p))
-
-	buffer.Clear()
-	echo := layers.ICMPv6Echo{
-		Identifier: 0xabcd,
-		SeqNumber:  1234,
+	err = gopacket.SerializeLayers(buffer, opt, &ip, &icmp)
+	if err != nil {
+		panic(err)
 	}
-	require.NoError(t, gopacket.SerializeLayers(buffer, opt, &ip, &icmp, &echo))
-	require.NoError(t, newPacket(buffer.Bytes(), true, p))
+
+	err = newPacket(buffer.Bytes(), true, p)
+	require.NoError(t, err)
 	assert.Equal(t, uint8(layers.IPProtocolICMPv6), p.Protocol)
 	assert.Equal(t, netip.MustParseAddr("ff02::2"), p.RemoteAddr)
 	assert.Equal(t, netip.MustParseAddr("ff02::1"), p.LocalAddr)
-	assert.Equal(t, uint16(0xabcd), p.RemotePort)
+	assert.Equal(t, uint16(0), p.RemotePort)
 	assert.Equal(t, uint16(0), p.LocalPort)
 	assert.False(t, p.Fragment)
 
@@ -581,7 +574,7 @@ func BenchmarkParseV6(b *testing.B) {
 	}
 
 	evilBytes := buffer.Bytes()
-	for range 200 {
+	for i := 0; i < 200; i++ {
 		evilBytes = append(evilBytes, hopHeader...)
 	}
 	evilBytes = append(evilBytes, lastHopHeader...)

overlay/device.go

@@ -16,3 +16,38 @@ type Device interface {
 	SupportsMultiqueue() bool
 	NewMultiQueueReader() (io.ReadWriteCloser, error)
 }
+
+// BatchReader is an optional interface that devices can implement
+// to support reading multiple packets in a single batch operation.
+// This can significantly reduce syscall overhead under high load.
+type BatchReader interface {
+	// ReadBatch reads up to len(packets) packets into the provided buffers.
+	// Each packet is read into packets[i] and its length is stored in sizes[i].
+	// Returns the number of packets read, or an error.
+	// A return of (0, nil) indicates no packets were available (non-blocking).
+	ReadBatch(packets [][]byte, sizes []int) (int, error)
+}
+
+// AsBatchReader returns a BatchReader if the reader supports batch operations,
+// otherwise returns nil.
+func AsBatchReader(r io.ReadWriteCloser) BatchReader {
+	if br, ok := r.(BatchReader); ok {
+		return br
+	}
+	return nil
+}
+
+// BatchEnabler is an optional interface for devices that need explicit
+// enabling of batch read support (e.g., setting non-blocking mode).
+type BatchEnabler interface {
+	EnableBatchReading() error
+}
+
+// EnableBatchReading enables batch reading on the device if supported.
+// Returns nil if the device doesn't support or need explicit enabling.
+func EnableBatchReading(d interface{}) error {
+	if be, ok := d.(BatchEnabler); ok {
+		return be.EnableBatchReading()
+	}
+	return nil
+}

overlay/tun_linux.go

@@ -24,6 +24,11 @@ import (
 	"golang.org/x/sys/unix"
 )
 
+const (
+	// virtioNetHdrLen is the length of virtio_net_hdr (without mergeable buffers)
+	virtioNetHdrLen = 10
+)
+
 type tun struct {
 	io.ReadWriteCloser
 	fd          int
@@ -34,6 +39,13 @@ type tun struct {
 	TXQueueLen  int
 	deviceIndex int
 	ioctlFd     uintptr
+	nonBlocking bool // true if fd is in non-blocking mode
+	vnetHdr     bool // true if IFF_VNET_HDR is enabled on the TUN device
+
+	// readBuf is used when vnetHdr is enabled to read the full packet+header
+	// before stripping the header. This is needed because caller-provided
+	// buffers are sized for MTU but kernel writes MTU+10 with virtio header.
+	readBuf []byte
 
 	Routes                    atomic.Pointer[[]Route]
 	routeTree                 atomic.Pointer[bart.Table[routing.Gateways]]
@@ -53,6 +65,23 @@ func (t *tun) Networks() []netip.Prefix {
 	return t.vpnNetworks
 }
 
+// tunVnetHdrSupported checks if the kernel supports IFF_VNET_HDR on TUN devices
+func tunVnetHdrSupported() bool {
+	fd, err := unix.Open("/dev/net/tun", unix.O_RDONLY, 0)
+	if err != nil {
+		return false
+	}
+	defer unix.Close(fd)
+
+	var features uint32
+	err = ioctl(uintptr(fd), uintptr(unix.TUNGETFEATURES), uintptr(unsafe.Pointer(&features)))
+	if err != nil {
+		return false
+	}
+
+	return features&unix.IFF_VNET_HDR != 0
+}
+
 type ifReq struct {
 	Name  [16]byte
 	Flags uint16
@@ -107,11 +136,18 @@ func newTun(c *config.C, l *logrus.Logger, vpnNetworks []netip.Prefix, multiqueu
 		}
 	}
 
+	// Check if VNET_HDR is supported before trying to use it
+	useVnetHdr := tunVnetHdrSupported()
+
 	var req ifReq
 	req.Flags = uint16(unix.IFF_TUN | unix.IFF_NO_PI)
 	if multiqueue {
 		req.Flags |= unix.IFF_MULTI_QUEUE
 	}
+	if useVnetHdr {
+		req.Flags |= unix.IFF_VNET_HDR
+	}
+
 	nameStr := c.GetString("tun.dev", "")
 	copy(req.Name[:], nameStr)
 	if err = ioctl(uintptr(fd), uintptr(unix.TUNSETIFF), uintptr(unsafe.Pointer(&req))); err != nil {
@@ -122,6 +158,13 @@ func newTun(c *config.C, l *logrus.Logger, vpnNetworks []netip.Prefix, multiqueu
 	}
 	name := strings.Trim(string(req.Name[:]), "\x00")
 
+	// Track if VNET_HDR is in use
+	// Note: We don't call TUNSETOFFLOAD - just handle the headers manually
+	vnetHdrEnabled := useVnetHdr
+	if vnetHdrEnabled {
+		l.Info("TUN VNET_HDR enabled")
+	}
+
 	file := os.NewFile(uintptr(fd), "/dev/net/tun")
 	t, err := newTunGeneric(c, l, file, vpnNetworks)
 	if err != nil {
@@ -129,6 +172,13 @@ func newTun(c *config.C, l *logrus.Logger, vpnNetworks []netip.Prefix, multiqueu
 	}
 
 	t.Device = name
+	t.vnetHdr = vnetHdrEnabled
+
+	// Allocate read buffer for virtio header handling
+	// Buffer needs to be large enough for virtio header + max packet
+	if t.vnetHdr {
+		t.readBuf = make([]byte, t.MaxMTU+virtioNetHdrLen)
+	}
 
 	return t, nil
 }
@@ -239,21 +289,172 @@ func (t *tun) SupportsMultiqueue() bool {
 }
 
 func (t *tun) NewMultiQueueReader() (io.ReadWriteCloser, error) {
-	fd, err := unix.Open("/dev/net/tun", os.O_RDWR, 0)
+	fd, err := unix.Open("/dev/net/tun", os.O_RDWR|unix.O_NONBLOCK, 0)
 	if err != nil {
 		return nil, err
 	}
 
 	var req ifReq
 	req.Flags = uint16(unix.IFF_TUN | unix.IFF_NO_PI | unix.IFF_MULTI_QUEUE)
+	if t.vnetHdr {
+		req.Flags |= unix.IFF_VNET_HDR
+	}
 	copy(req.Name[:], t.Device)
 	if err = ioctl(uintptr(fd), uintptr(unix.TUNSETIFF), uintptr(unsafe.Pointer(&req))); err != nil {
 		return nil, err
 	}
 
-	file := os.NewFile(uintptr(fd), "/dev/net/tun")
+	reader := &tunBatchReader{fd: fd, device: t.Device, vnetHdr: t.vnetHdr}
+	if t.vnetHdr {
+		reader.readBuf = make([]byte, t.MaxMTU+virtioNetHdrLen)
+	}
+	return reader, nil
+}
 
-	return file, nil
+// tunBatchReader implements BatchReader for efficient batch packet reading
+type tunBatchReader struct {
+	fd      int
+	device  string
+	vnetHdr bool
+	readBuf []byte // internal buffer for virtio header handling
+}
+
+func (r *tunBatchReader) Read(b []byte) (int, error) {
+	// Choose buffer: use internal buffer for vnetHdr, caller's buffer otherwise
+	readBuf := b
+	if r.vnetHdr {
+		readBuf = r.readBuf
+	}
+
+	// Use poll to wait for data, then read
+	for {
+		n, err := unix.Read(r.fd, readBuf)
+		if err == nil {
+			if r.vnetHdr && n > virtioNetHdrLen {
+				packetLen := n - virtioNetHdrLen
+				copy(b, readBuf[virtioNetHdrLen:n])
+				return packetLen, nil
+			}
+			if r.vnetHdr {
+				return 0, nil // No packet data
+			}
+			return n, nil
+		}
+		if err == unix.EAGAIN || err == unix.EWOULDBLOCK {
+			// Wait for data
+			pfds := []unix.PollFd{{Fd: int32(r.fd), Events: unix.POLLIN}}
+			_, err = unix.Poll(pfds, -1)
+			if err != nil {
+				if err == unix.EINTR {
+					continue
+				}
+				return 0, err
+			}
+			continue
+		}
+		return n, err
+	}
+}
+
+func (r *tunBatchReader) Write(b []byte) (int, error) {
+	if !r.vnetHdr {
+		return unix.Write(r.fd, b)
+	}
+
+	// Use writev to prepend virtio header without copying the packet data
+	// Header is all zeros = no GSO, no checksum offload
+	var hdr [virtioNetHdrLen]byte
+	bufs := [][]byte{hdr[:], b}
+
+	n, err := unix.Writev(r.fd, bufs)
+	if err != nil {
+		return 0, err
+	}
+	// Return only the packet bytes written (exclude header)
+	if n > virtioNetHdrLen {
+		return n - virtioNetHdrLen, nil
+	}
+	return 0, nil
+}
+
+func (r *tunBatchReader) Close() error {
+	return unix.Close(r.fd)
+}
+
+// ReadBatch reads up to len(packets) packets from the TUN device.
+// It drains all available packets without blocking, using poll() only
+// when no packets have been read yet.
+func (r *tunBatchReader) ReadBatch(packets [][]byte, sizes []int) (int, error) {
+	count := 0
+	maxPackets := len(packets)
+	if len(sizes) < maxPackets {
+		maxPackets = len(sizes)
+	}
+
+	// Choose read buffer based on vnetHdr
+	readBuf := packets[0] // Will be updated in loop for non-vnetHdr
+	if r.vnetHdr {
+		readBuf = r.readBuf
+	}
+
+	for count < maxPackets {
+		if !r.vnetHdr {
+			readBuf = packets[count]
+		}
+
+		n, err := unix.Read(r.fd, readBuf)
+		if err == nil && n > 0 {
+			if r.vnetHdr {
+				if n > virtioNetHdrLen {
+					packetLen := n - virtioNetHdrLen
+					copy(packets[count], readBuf[virtioNetHdrLen:n])
+					sizes[count] = packetLen
+				} else {
+					// Malformed packet (no data after header), skip
+					continue
+				}
+			} else {
+				sizes[count] = n
+			}
+			count++
+			continue
+		}
+
+		if err == unix.EAGAIN || err == unix.EWOULDBLOCK {
+			// No more packets available
+			if count > 0 {
+				// We have some packets, return them
+				return count, nil
+			}
+			// No packets yet, wait for at least one
+			pfds := []unix.PollFd{{Fd: int32(r.fd), Events: unix.POLLIN}}
+			_, err = unix.Poll(pfds, -1)
+			if err != nil {
+				if err == unix.EINTR {
+					continue
+				}
+				return 0, err
+			}
+			continue
+		}
+
+		if err != nil {
+			if count > 0 {
+				// Return what we have
+				return count, nil
+			}
+			return 0, err
+		}
+
+		if n == 0 {
+			if count > 0 {
+				return count, nil
+			}
+			return 0, io.EOF
+		}
+	}
+
+	return count, nil
 }
 
 func (t *tun) RoutesFor(ip netip.Addr) routing.Gateways {
@@ -262,6 +463,27 @@ func (t *tun) RoutesFor(ip netip.Addr) routing.Gateways {
 }
 
 func (t *tun) Write(b []byte) (int, error) {
+	if !t.vnetHdr {
+		return t.writeSimple(b)
+	}
+
+	// Use writev to prepend virtio header without copying the packet data
+	// Header is all zeros = no GSO, no checksum offload
+	var hdr [virtioNetHdrLen]byte
+	bufs := [][]byte{hdr[:], b}
+
+	n, err := unix.Writev(t.fd, bufs)
+	if err != nil {
+		return 0, err
+	}
+	// Return only the packet bytes written (exclude header)
+	if n > virtioNetHdrLen {
+		return n - virtioNetHdrLen, nil
+	}
+	return 0, nil
+}
+
+func (t *tun) writeSimple(b []byte) (int, error) {
 	var nn int
 	maximum := len(b)
 
@@ -284,6 +506,177 @@ func (t *tun) Write(b []byte) (int, error) {
 	}
 }
 
+// EnableBatchReading sets the TUN fd to non-blocking mode to enable batch reading.
+// This should be called before using ReadBatch.
+func (t *tun) EnableBatchReading() error {
+	if t.nonBlocking {
+		return nil
+	}
+	err := unix.SetNonblock(t.fd, true)
+	if err != nil {
+		return err
+	}
+	t.nonBlocking = true
+	return nil
+}
+
+// Read overrides the default Read to handle non-blocking mode and virtio headers
+func (t *tun) Read(b []byte) (int, error) {
+	if !t.vnetHdr {
+		return t.readSimple(b)
+	}
+
+	// With VNET_HDR, read into internal buffer (which has space for header)
+	// then copy packet data to caller's buffer
+	if !t.nonBlocking {
+		n, err := t.ReadWriteCloser.Read(t.readBuf)
+		if err != nil {
+			return 0, err
+		}
+		if n <= virtioNetHdrLen {
+			return 0, nil // No packet data
+		}
+		packetLen := n - virtioNetHdrLen
+		copy(b, t.readBuf[virtioNetHdrLen:n])
+		return packetLen, nil
+	}
+
+	// Non-blocking read with poll
+	for {
+		n, err := unix.Read(t.fd, t.readBuf)
+		if err == nil {
+			if n <= virtioNetHdrLen {
+				return 0, nil // No packet data
+			}
+			packetLen := n - virtioNetHdrLen
+			copy(b, t.readBuf[virtioNetHdrLen:n])
+			return packetLen, nil
+		}
+		if err == unix.EAGAIN || err == unix.EWOULDBLOCK {
+			pfds := []unix.PollFd{{Fd: int32(t.fd), Events: unix.POLLIN}}
+			_, err = unix.Poll(pfds, -1)
+			if err != nil {
+				if err == unix.EINTR {
+					continue
+				}
+				return 0, err
+			}
+			continue
+		}
+		return n, err
+	}
+}
+
+func (t *tun) readSimple(b []byte) (int, error) {
+	if !t.nonBlocking {
+		return t.ReadWriteCloser.Read(b)
+	}
+
+	for {
+		n, err := unix.Read(t.fd, b)
+		if err == nil {
+			return n, nil
+		}
+		if err == unix.EAGAIN || err == unix.EWOULDBLOCK {
+			pfds := []unix.PollFd{{Fd: int32(t.fd), Events: unix.POLLIN}}
+			_, err = unix.Poll(pfds, -1)
+			if err != nil {
+				if err == unix.EINTR {
+					continue
+				}
+				return 0, err
+			}
+			continue
+		}
+		return n, err
+	}
+}
+
+// ReadBatch reads up to len(packets) packets from the TUN device.
+// EnableBatchReading must be called first.
+func (t *tun) ReadBatch(packets [][]byte, sizes []int) (int, error) {
+	if !t.nonBlocking {
+		// Fallback to single read if non-blocking not enabled
+		n, err := t.Read(packets[0])
+		if err != nil {
+			return 0, err
+		}
+		sizes[0] = n
+		return 1, nil
+	}
+
+	count := 0
+	maxPackets := len(packets)
+	if len(sizes) < maxPackets {
+		maxPackets = len(sizes)
+	}
+
+	// Choose read buffer based on vnetHdr
+	// With vnetHdr, we need to read into internal buffer (has space for header)
+	// then copy packet data to caller's buffer
+	readBuf := packets[0] // Will be updated in the loop
+	if t.vnetHdr {
+		readBuf = t.readBuf
+	}
+
+	for count < maxPackets {
+		if !t.vnetHdr {
+			readBuf = packets[count]
+		}
+
+		n, err := unix.Read(t.fd, readBuf)
+		if err == nil && n > 0 {
+			if t.vnetHdr {
+				if n > virtioNetHdrLen {
+					packetLen := n - virtioNetHdrLen
+					copy(packets[count], readBuf[virtioNetHdrLen:n])
+					sizes[count] = packetLen
+				} else {
+					// Malformed packet (no data after header), skip
+					continue
+				}
+			} else {
+				sizes[count] = n
+			}
+			count++
+			continue
+		}
+
+		if err == unix.EAGAIN || err == unix.EWOULDBLOCK {
+			// No more packets available
+			if count > 0 {
+				return count, nil
+			}
+			// No packets yet, wait for at least one
+			pfds := []unix.PollFd{{Fd: int32(t.fd), Events: unix.POLLIN}}
+			_, err = unix.Poll(pfds, -1)
+			if err != nil {
+				if err == unix.EINTR {
+					continue
+				}
+				return 0, err
+			}
+			continue
+		}
+
+		if err != nil {
+			if count > 0 {
+				return count, nil
+			}
+			return 0, err
+		}
+
+		if n == 0 {
+			if count > 0 {
+				return count, nil
+			}
+			return 0, io.EOF
+		}
+	}
+
+	return count, nil
+}
+
 func (t *tun) deviceBytes() (o [16]byte) {
 	for i, c := range t.Device {
 		o[i] = byte(c)

relay_manager.go

@@ -55,7 +55,7 @@ func (rm *relayManager) setAmRelay(v bool) {
 func AddRelay(l *logrus.Logger, relayHostInfo *HostInfo, hm *HostMap, vpnIp netip.Addr, remoteIdx *uint32, relayType int, state int) (uint32, error) {
 	hm.Lock()
 	defer hm.Unlock()
-	for range 32 {
+	for i := 0; i < 32; i++ {
 		index, err := generateIndex(l)
 		if err != nil {
 			return 0, err

remote_list.go

@@ -404,7 +404,12 @@ func (r *RemoteList) Rebuild(preferredRanges []netip.Prefix) {
 
 // unlockedIsBad assumes you have the write lock and checks if the remote matches any entry in the blocked address list
 func (r *RemoteList) unlockedIsBad(remote netip.AddrPort) bool {
-	return slices.Contains(r.badRemotes, remote)
+	for _, v := range r.badRemotes {
+		if v == remote {
+			return true
+		}
+	}
+	return false
 }
 
 // unlockedSetLearnedV4 assumes you have the write lock and sets the current learned address for this owner and marks the

ssh.go

@@ -6,7 +6,6 @@ import (
 	"errors"
 	"flag"
 	"fmt"
-	"maps"
 	"net"
 	"net/netip"
 	"os"
@@ -632,9 +631,6 @@ func sshCreateTunnel(ifce *Interface, fs any, a []string, w sshd.StringWriter) e
 	}
 
 	hostInfo = ifce.handshakeManager.StartHandshake(vpnAddr, nil)
-	if hostInfo == nil {
-		return w.WriteLine("Handshake rate limit reached")
-	}
 	if addr.IsValid() {
 		hostInfo.SetRemote(addr)
 	}
@@ -835,7 +831,9 @@ func sshPrintRelays(ifce *Interface, fs any, a []string, w sshd.StringWriter) er
 
 	relays := map[uint32]*HostInfo{}
 	ifce.hostMap.Lock()
-	maps.Copy(relays, ifce.hostMap.Relays)
+	for k, v := range ifce.hostMap.Relays {
+		relays[k] = v
+	}
 	ifce.hostMap.Unlock()
 
 	type RelayFor struct {

timeout_test.go

@@ -134,7 +134,7 @@ func TestTimerWheel_Purge(t *testing.T) {
 	assert.True(t, tw.lastTick.After(lastTick))
 
 	// Make sure we get all 4 packets back
-	for i := range 4 {
+	for i := 0; i < 4; i++ {
 		p, has := tw.Purge()
 		assert.True(t, has)
 		assert.Equal(t, fps[i], p)
@@ -149,7 +149,7 @@ func TestTimerWheel_Purge(t *testing.T) {
 	// Make sure we cached the free'd items
 	assert.Equal(t, 4, tw.itemsCached)
 	ci := tw.itemCache
-	for range 4 {
+	for i := 0; i < 4; i++ {
 		assert.NotNil(t, ci)
 		ci = ci.Next
 	}

udp/conn.go

@@ -13,13 +13,22 @@ type EncReader func(
 	payload []byte,
 )
 
+// BatchPacket represents a single packet in a batch write operation
+type BatchPacket struct {
+	Payload []byte
+	Addr    netip.AddrPort
+}
+
 type Conn interface {
 	Rebind() error
 	LocalAddr() (netip.AddrPort, error)
 	ListenOut(r EncReader)
 	WriteTo(b []byte, addr netip.AddrPort) error
+	WriteBatch(pkts []BatchPacket) (int, error)
 	ReloadConfig(c *config.C)
 	SupportsMultipleReaders() bool
+	SupportsGSO() bool
+	SupportsGRO() bool
 	Close() error
 }
 
@@ -37,9 +46,18 @@ func (NoopConn) ListenOut(_ EncReader) {
 func (NoopConn) SupportsMultipleReaders() bool {
 	return false
 }
+func (NoopConn) SupportsGSO() bool {
+	return false
+}
+func (NoopConn) SupportsGRO() bool {
+	return false
+}
 func (NoopConn) WriteTo(_ []byte, _ netip.AddrPort) error {
 	return nil
 }
+func (NoopConn) WriteBatch(pkts []BatchPacket) (int, error) {
+	return len(pkts), nil
+}
 func (NoopConn) ReloadConfig(_ *config.C) {
 	return
 }

udp/udp_darwin.go

@@ -188,6 +188,14 @@ func (u *StdConn) SupportsMultipleReaders() bool {
 	return false
 }
 
+func (u *StdConn) SupportsGSO() bool {
+	return false
+}
+
+func (u *StdConn) SupportsGRO() bool {
+	return false
+}
+
 func (u *StdConn) Rebind() error {
 	var err error
 	if u.isV4 {
@@ -202,3 +210,12 @@ func (u *StdConn) Rebind() error {
 
 	return nil
 }
+
+func (u *StdConn) WriteBatch(pkts []BatchPacket) (int, error) {
+	for i := range pkts {
+		if err := u.WriteTo(pkts[i].Payload, pkts[i].Addr); err != nil {
+			return i, err
+		}
+	}
+	return len(pkts), nil
+}

udp/udp_generic.go

@@ -101,3 +101,20 @@ func (u *GenericConn) ListenOut(r EncReader) {
 func (u *GenericConn) SupportsMultipleReaders() bool {
 	return false
 }
+
+func (u *GenericConn) SupportsGSO() bool {
+	return false
+}
+
+func (u *GenericConn) SupportsGRO() bool {
+	return false
+}
+
+func (u *GenericConn) WriteBatch(pkts []BatchPacket) (int, error) {
+	for i := range pkts {
+		if err := u.WriteTo(pkts[i].Payload, pkts[i].Addr); err != nil {
+			return i, err
+		}
+	}
+	return len(pkts), nil
+}

udp/udp_linux.go

@@ -5,6 +5,7 @@ package udp
 
 import (
 	"encoding/binary"
+	"errors"
 	"fmt"
 	"net"
 	"net/netip"
@@ -18,10 +19,12 @@ import (
 )
 
 type StdConn struct {
-	sysFd int
-	isV4  bool
-	l     *logrus.Logger
-	batch int
+	sysFd        int
+	isV4         bool
+	l            *logrus.Logger
+	batch        int
+	gsoSupported bool
+	groSupported bool
 }
 
 func maybeIPV4(ip net.IP) (net.IP, bool) {
@@ -32,6 +35,78 @@ func maybeIPV4(ip net.IP) (net.IP, bool) {
 	return ip, false
 }
 
+// supportsUDPOffload checks if the kernel supports UDP GSO (Generic Segmentation Offload)
+// by attempting to get the UDP_SEGMENT socket option.
+func supportsUDPOffload(fd int) bool {
+	_, err := unix.GetsockoptInt(fd, unix.IPPROTO_UDP, unix.UDP_SEGMENT)
+	return err == nil
+}
+
+// supportsUDPGRO checks if the kernel supports UDP GRO (Generic Receive Offload)
+// and attempts to enable it on the socket.
+func supportsUDPGRO(fd int) bool {
+	// Try to enable UDP_GRO
+	err := unix.SetsockoptInt(fd, unix.IPPROTO_UDP, unix.UDP_GRO, 1)
+	return err == nil
+}
+
+const (
+	// Maximum number of datagrams that can be coalesced with GSO/GRO
+	udpSegmentMaxDatagrams = 64
+
+	// Maximum size of a GRO coalesced packet (64KB is the practical limit)
+	// This is udpSegmentMaxDatagrams * MTU but capped at 65535
+	groMaxPacketSize = 65535
+)
+
+// setGSOSize writes a UDP_SEGMENT control message to the provided buffer
+// with the given segment size. Returns the actual control message length.
+func setGSOSize(control []byte, gsoSize uint16) int {
+	// Build the cmsghdr structure
+	cmsgLen := unix.CmsgLen(2) // 2 bytes for uint16 segment size
+	cmsg := (*unix.Cmsghdr)(unsafe.Pointer(&control[0]))
+	cmsg.Level = unix.IPPROTO_UDP
+	cmsg.Type = unix.UDP_SEGMENT
+	cmsg.SetLen(cmsgLen)
+
+	// Write the segment size after the header (after cmsghdr)
+	binary.NativeEndian.PutUint16(control[unix.SizeofCmsghdr:], gsoSize)
+
+	return unix.CmsgSpace(2) // aligned size
+}
+
+// getGROSize parses a control message buffer to extract the UDP_GRO segment size.
+// Returns 0 if no GRO control message is present (meaning the packet is not coalesced).
+func getGROSize(control []byte, controlLen int) uint16 {
+	if controlLen < unix.SizeofCmsghdr {
+		return 0
+	}
+
+	// Parse control messages
+	for offset := 0; offset < controlLen; {
+		if offset+unix.SizeofCmsghdr > controlLen {
+			break
+		}
+
+		cmsg := (*unix.Cmsghdr)(unsafe.Pointer(&control[offset]))
+		cmsgDataLen := int(cmsg.Len) - unix.SizeofCmsghdr
+		if cmsgDataLen < 0 {
+			break
+		}
+
+		if cmsg.Level == unix.IPPROTO_UDP && cmsg.Type == unix.UDP_GRO {
+			if cmsgDataLen >= 2 {
+				return binary.NativeEndian.Uint16(control[offset+unix.SizeofCmsghdr:])
+			}
+		}
+
+		// Move to next control message (aligned)
+		offset += unix.CmsgSpace(cmsgDataLen)
+	}
+
+	return 0
+}
+
 func NewListener(l *logrus.Logger, ip netip.Addr, port int, multi bool, batch int) (Conn, error) {
 	af := unix.AF_INET6
 	if ip.Is4() {
@@ -69,13 +144,31 @@ func NewListener(l *logrus.Logger, ip netip.Addr, port int, multi bool, batch in
 		return nil, fmt.Errorf("unable to bind to socket: %s", err)
 	}
 
-	return &StdConn{sysFd: fd, isV4: ip.Is4(), l: l, batch: batch}, err
+	gsoSupported := supportsUDPOffload(fd)
+	if gsoSupported {
+		l.Info("UDP GSO offload is supported")
+	}
+
+	groSupported := supportsUDPGRO(fd)
+	if groSupported {
+		l.Info("UDP GRO offload is supported and enabled")
+	}
+
+	return &StdConn{sysFd: fd, isV4: ip.Is4(), l: l, batch: batch, gsoSupported: gsoSupported, groSupported: groSupported}, err
 }
 
 func (u *StdConn) SupportsMultipleReaders() bool {
 	return true
 }
 
+func (u *StdConn) SupportsGSO() bool {
+	return u.gsoSupported
+}
+
+func (u *StdConn) SupportsGRO() bool {
+	return u.groSupported
+}
+
 func (u *StdConn) Rebind() error {
 	return nil
 }
@@ -125,13 +218,27 @@ func (u *StdConn) LocalAddr() (netip.AddrPort, error) {
 func (u *StdConn) ListenOut(r EncReader) {
 	var ip netip.Addr
 
-	msgs, buffers, names := u.PrepareRawMessages(u.batch)
+	msgs, buffers, names, controls := u.PrepareRawMessages(u.batch)
 	read := u.ReadMulti
 	if u.batch == 1 {
 		read = u.ReadSingle
 	}
 
+	// Store the original control buffer size for resetting after each read
+	controlLen := 0
+	if u.groSupported && len(controls) > 0 && len(controls[0]) > 0 {
+		controlLen = len(controls[0])
+	}
+
 	for {
+		// Reset Controllen before each read - the kernel updates this field
+		// after recvmsg to indicate actual received control data length
+		if controlLen > 0 {
+			for i := range msgs {
+				setMsghdrControllen(&msgs[i].Hdr, controlLen)
+			}
+		}
+
 		n, err := read(msgs)
 		if err != nil {
 			u.l.WithError(err).Debug("udp socket is closed, exiting read loop")
@@ -139,13 +246,36 @@ func (u *StdConn) ListenOut(r EncReader) {
 		}
 
 		for i := 0; i < n; i++ {
-			// Its ok to skip the ok check here, the slicing is the only error that can occur and it will panic
+			// Extract source address
 			if u.isV4 {
 				ip, _ = netip.AddrFromSlice(names[i][4:8])
 			} else {
 				ip, _ = netip.AddrFromSlice(names[i][8:24])
 			}
-			r(netip.AddrPortFrom(ip.Unmap(), binary.BigEndian.Uint16(names[i][2:4])), buffers[i][:msgs[i].Len])
+			srcAddr := netip.AddrPortFrom(ip.Unmap(), binary.BigEndian.Uint16(names[i][2:4]))
+
+			// Check for GRO coalesced packet
+			totalLen := int(msgs[i].Len)
+			segmentSize := uint16(0)
+			if controlLen > 0 {
+				segmentSize = getGROSize(controls[i], getMsghdrControllen(&msgs[i].Hdr))
+			}
+
+			if segmentSize > 0 && totalLen > int(segmentSize) {
+				// This is a GRO coalesced packet - split it into individual datagrams
+				for offset := 0; offset < totalLen; {
+					packetLen := int(segmentSize)
+					if offset+packetLen > totalLen {
+						// Last packet may be smaller
+						packetLen = totalLen - offset
+					}
+					r(srcAddr, buffers[i][offset:offset+packetLen])
+					offset += packetLen
+				}
+			} else {
+				// Single packet, no coalescing
+				r(srcAddr, buffers[i][:totalLen])
+			}
 		}
 	}
 }
@@ -313,6 +443,226 @@ func (u *StdConn) Close() error {
 	return syscall.Close(u.sysFd)
 }
 
+func (u *StdConn) WriteBatch(pkts []BatchPacket) (int, error) {
+	if len(pkts) == 0 {
+		return 0, nil
+	}
+
+	// If GSO is supported, try to coalesce packets to the same destination
+	if u.gsoSupported {
+		return u.writeBatchGSO(pkts)
+	}
+
+	return u.writeBatchSendmmsg(pkts)
+}
+
+// writeBatchSendmmsg sends packets using sendmmsg without GSO coalescing
+func (u *StdConn) writeBatchSendmmsg(pkts []BatchPacket) (int, error) {
+	msgs := make([]rawMessage, len(pkts))
+	iovecs := make([]iovec, len(pkts))
+	var names4 []unix.RawSockaddrInet4
+	var names6 []unix.RawSockaddrInet6
+
+	if u.isV4 {
+		names4 = make([]unix.RawSockaddrInet4, len(pkts))
+	} else {
+		names6 = make([]unix.RawSockaddrInet6, len(pkts))
+	}
+
+	for i := range pkts {
+		setIovecBase(&iovecs[i], &pkts[i].Payload[0])
+		setIovecLen(&iovecs[i], len(pkts[i].Payload))
+		msgs[i].Hdr.Iov = &iovecs[i]
+		setMsghdrIovlen(&msgs[i].Hdr, 1)
+
+		if u.isV4 {
+			names4[i].Family = unix.AF_INET
+			names4[i].Addr = pkts[i].Addr.Addr().As4()
+			binary.BigEndian.PutUint16((*[2]byte)(unsafe.Pointer(&names4[i].Port))[:], pkts[i].Addr.Port())
+			msgs[i].Hdr.Name = (*byte)(unsafe.Pointer(&names4[i]))
+			msgs[i].Hdr.Namelen = unix.SizeofSockaddrInet4
+		} else {
+			names6[i].Family = unix.AF_INET6
+			names6[i].Addr = pkts[i].Addr.Addr().As16()
+			binary.BigEndian.PutUint16((*[2]byte)(unsafe.Pointer(&names6[i].Port))[:], pkts[i].Addr.Port())
+			msgs[i].Hdr.Name = (*byte)(unsafe.Pointer(&names6[i]))
+			msgs[i].Hdr.Namelen = unix.SizeofSockaddrInet6
+		}
+	}
+
+	var sent int
+	for sent < len(msgs) {
+		n, _, errno := unix.Syscall6(
+			unix.SYS_SENDMMSG,
+			uintptr(u.sysFd),
+			uintptr(unsafe.Pointer(&msgs[sent])),
+			uintptr(len(msgs)-sent),
+			0,
+			0,
+			0,
+		)
+
+		if errno == unix.EINTR {
+			continue
+		}
+
+		if errno != 0 {
+			return sent, &net.OpError{Op: "sendmmsg", Err: errno}
+		}
+
+		sent += int(n)
+	}
+
+	return sent, nil
+}
+
+// writeBatchGSO sends packets using GSO coalescing when possible.
+// Packets to the same destination with the same size are coalesced into a single
+// GSO message. Mixed destinations or sizes fall back to individual sendmmsg calls.
+func (u *StdConn) writeBatchGSO(pkts []BatchPacket) (int, error) {
+	// Group packets by destination and try to coalesce
+	totalSent := 0
+	i := 0
+
+	for i < len(pkts) {
+		// Find a run of packets to the same destination with compatible sizes
+		startIdx := i
+		dst := pkts[i].Addr
+		segmentSize := len(pkts[i].Payload)
+
+		// Count how many packets we can coalesce (same destination, same size except possibly last)
+		coalescedCount := 1
+		totalSize := segmentSize
+		for i+coalescedCount < len(pkts) && coalescedCount < udpSegmentMaxDatagrams {
+			next := pkts[i+coalescedCount]
+			if next.Addr != dst {
+				break
+			}
+			nextSize := len(next.Payload)
+			// For GSO, all packets except the last must have the same size
+			// The last packet can be smaller (but not larger)
+			if nextSize != segmentSize {
+				// Check if this could be the last packet (smaller is ok)
+				if nextSize < segmentSize && i+coalescedCount == len(pkts)-1 {
+					coalescedCount++
+					totalSize += nextSize
+				}
+				break
+			}
+			coalescedCount++
+			totalSize += nextSize
+		}
+
+		// If we have multiple packets to coalesce, use GSO
+		if coalescedCount > 1 {
+			err := u.sendGSO(pkts[startIdx:startIdx+coalescedCount], dst, segmentSize, totalSize)
+			if err != nil {
+				// If GSO fails (e.g., EIO due to NIC not supporting checksum offload),
+				// disable GSO and fall back to sendmmsg for the rest
+				if isGSOError(err) {
+					u.l.WithError(err).Warn("GSO send failed, disabling GSO for this connection")
+					u.gsoSupported = false
+					// Send remaining packets with sendmmsg
+					remaining, rerr := u.writeBatchSendmmsg(pkts[startIdx:])
+					return totalSent + remaining, rerr
+				}
+				return totalSent, err
+			}
+			totalSent += coalescedCount
+			i += coalescedCount
+		} else {
+			// Single packet, send without GSO overhead
+			err := u.WriteTo(pkts[i].Payload, pkts[i].Addr)
+			if err != nil {
+				return totalSent, err
+			}
+			totalSent++
+			i++
+		}
+	}
+
+	return totalSent, nil
+}
+
+// sendGSO sends coalesced packets using UDP GSO
+func (u *StdConn) sendGSO(pkts []BatchPacket, dst netip.AddrPort, segmentSize, totalSize int) error {
+	// Allocate a buffer large enough for all packet payloads
+	coalescedBuf := make([]byte, totalSize)
+	offset := 0
+	for _, pkt := range pkts {
+		copy(coalescedBuf[offset:], pkt.Payload)
+		offset += len(pkt.Payload)
+	}
+
+	// Prepare control message with GSO segment size
+	control := make([]byte, unix.CmsgSpace(2))
+	controlLen := setGSOSize(control, uint16(segmentSize))
+
+	// Prepare the iovec
+	iov := iovec{}
+	setIovecBase(&iov, &coalescedBuf[0])
+	setIovecLen(&iov, totalSize)
+
+	// Prepare the msghdr
+	var hdr msghdr
+	hdr.Iov = &iov
+	setMsghdrIovlen(&hdr, 1)
+	hdr.Control = &control[0]
+	setMsghdrControllen(&hdr, controlLen)
+
+	// Declare sockaddr at function scope so it remains valid for the syscall
+	// (must not go out of scope before the syscall is made)
+	var rsa4 unix.RawSockaddrInet4
+	var rsa6 unix.RawSockaddrInet6
+
+	// Set destination address
+	if u.isV4 {
+		rsa4.Family = unix.AF_INET
+		rsa4.Addr = dst.Addr().As4()
+		binary.BigEndian.PutUint16((*[2]byte)(unsafe.Pointer(&rsa4.Port))[:], dst.Port())
+		hdr.Name = (*byte)(unsafe.Pointer(&rsa4))
+		hdr.Namelen = unix.SizeofSockaddrInet4
+	} else {
+		rsa6.Family = unix.AF_INET6
+		rsa6.Addr = dst.Addr().As16()
+		binary.BigEndian.PutUint16((*[2]byte)(unsafe.Pointer(&rsa6.Port))[:], dst.Port())
+		hdr.Name = (*byte)(unsafe.Pointer(&rsa6))
+		hdr.Namelen = unix.SizeofSockaddrInet6
+	}
+
+	for {
+		_, _, errno := unix.Syscall6(
+			unix.SYS_SENDMSG,
+			uintptr(u.sysFd),
+			uintptr(unsafe.Pointer(&hdr)),
+			0,
+			0,
+			0,
+			0,
+		)
+
+		if errno == unix.EINTR {
+			continue
+		}
+
+		if errno != 0 {
+			return &net.OpError{Op: "sendmsg", Err: errno}
+		}
+
+		return nil
+	}
+}
+
+// isGSOError returns true if the error indicates GSO is not supported by the NIC
+func isGSOError(err error) bool {
+	var opErr *net.OpError
+	if !errors.As(err, &opErr) {
+		return false
+	}
+	// EIO typically means the NIC doesn't support checksum offload required for GSO
+	return errors.Is(opErr.Err, unix.EIO)
+}
+
 func NewUDPStatsEmitter(udpConns []Conn) func() {
 	// Check if our kernel supports SO_MEMINFO before registering the gauges
 	var udpGauges [][unix.SK_MEMINFO_VARS]metrics.Gauge

udp/udp_linux_32.go

@@ -30,13 +30,26 @@ type rawMessage struct {
 	Len uint32
 }
 
-func (u *StdConn) PrepareRawMessages(n int) ([]rawMessage, [][]byte, [][]byte) {
+func (u *StdConn) PrepareRawMessages(n int) ([]rawMessage, [][]byte, [][]byte, [][]byte) {
 	msgs := make([]rawMessage, n)
 	buffers := make([][]byte, n)
 	names := make([][]byte, n)
+	controls := make([][]byte, n)
+
+	// Use larger buffers if GRO is enabled to hold coalesced packets
+	bufSize := MTU
+	if u.groSupported {
+		bufSize = groMaxPacketSize
+	}
+
+	// Control buffer size for receiving UDP_GRO segment size
+	controlSize := 0
+	if u.groSupported {
+		controlSize = unix.CmsgSpace(2) // space for uint16 segment size
+	}
 
 	for i := range msgs {
-		buffers[i] = make([]byte, MTU)
+		buffers[i] = make([]byte, bufSize)
 		names[i] = make([]byte, unix.SizeofSockaddrInet6)
 
 		vs := []iovec{
@@ -48,7 +61,34 @@ func (u *StdConn) PrepareRawMessages(n int) ([]rawMessage, [][]byte, [][]byte) {
 
 		msgs[i].Hdr.Name = &names[i][0]
 		msgs[i].Hdr.Namelen = uint32(len(names[i]))
+
+		// Set up control message buffer for GRO
+		if controlSize > 0 {
+			controls[i] = make([]byte, controlSize)
+			msgs[i].Hdr.Control = &controls[i][0]
+			msgs[i].Hdr.Controllen = uint32(controlSize)
+		}
 	}
 
-	return msgs, buffers, names
+	return msgs, buffers, names, controls
+}
+
+func setIovecBase(iov *iovec, base *byte) {
+	iov.Base = base
+}
+
+func setIovecLen(iov *iovec, l int) {
+	iov.Len = uint32(l)
+}
+
+func setMsghdrIovlen(hdr *msghdr, l int) {
+	hdr.Iovlen = uint32(l)
+}
+
+func setMsghdrControllen(hdr *msghdr, l int) {
+	hdr.Controllen = uint32(l)
+}
+
+func getMsghdrControllen(hdr *msghdr) int {
+	return int(hdr.Controllen)
 }

udp/udp_linux_64.go

@@ -33,13 +33,26 @@ type rawMessage struct {
 	Pad0 [4]byte
 }
 
-func (u *StdConn) PrepareRawMessages(n int) ([]rawMessage, [][]byte, [][]byte) {
+func (u *StdConn) PrepareRawMessages(n int) ([]rawMessage, [][]byte, [][]byte, [][]byte) {
 	msgs := make([]rawMessage, n)
 	buffers := make([][]byte, n)
 	names := make([][]byte, n)
+	controls := make([][]byte, n)
+
+	// Use larger buffers if GRO is enabled to hold coalesced packets
+	bufSize := MTU
+	if u.groSupported {
+		bufSize = groMaxPacketSize
+	}
+
+	// Control buffer size for receiving UDP_GRO segment size
+	controlSize := 0
+	if u.groSupported {
+		controlSize = unix.CmsgSpace(2) // space for uint16 segment size
+	}
 
 	for i := range msgs {
-		buffers[i] = make([]byte, MTU)
+		buffers[i] = make([]byte, bufSize)
 		names[i] = make([]byte, unix.SizeofSockaddrInet6)
 
 		vs := []iovec{
@@ -51,7 +64,34 @@ func (u *StdConn) PrepareRawMessages(n int) ([]rawMessage, [][]byte, [][]byte) {
 
 		msgs[i].Hdr.Name = &names[i][0]
 		msgs[i].Hdr.Namelen = uint32(len(names[i]))
+
+		// Set up control message buffer for GRO
+		if controlSize > 0 {
+			controls[i] = make([]byte, controlSize)
+			msgs[i].Hdr.Control = &controls[i][0]
+			msgs[i].Hdr.Controllen = uint64(controlSize)
+		}
 	}
 
-	return msgs, buffers, names
+	return msgs, buffers, names, controls
+}
+
+func setIovecBase(iov *iovec, base *byte) {
+	iov.Base = base
+}
+
+func setIovecLen(iov *iovec, l int) {
+	iov.Len = uint64(l)
+}
+
+func setMsghdrIovlen(hdr *msghdr, l int) {
+	hdr.Iovlen = uint64(l)
+}
+
+func setMsghdrControllen(hdr *msghdr, l int) {
+	hdr.Controllen = uint64(l)
+}
+
+func getMsghdrControllen(hdr *msghdr) int {
+	return int(hdr.Controllen)
 }

udp/udp_rio_windows.go

@@ -332,12 +332,29 @@ func (u *RIOConn) SupportsMultipleReaders() bool {
 	return false
 }
 
+func (u *RIOConn) SupportsGSO() bool {
+	return false
+}
+
+func (u *RIOConn) SupportsGRO() bool {
+	return false
+}
+
 func (u *RIOConn) Rebind() error {
 	return nil
 }
 
 func (u *RIOConn) ReloadConfig(*config.C) {}
 
+func (u *RIOConn) WriteBatch(pkts []BatchPacket) (int, error) {
+	for i := range pkts {
+		if err := u.WriteTo(pkts[i].Payload, pkts[i].Addr); err != nil {
+			return i, err
+		}
+	}
+	return len(pkts), nil
+}
+
 func (u *RIOConn) Close() error {
 	if !u.isOpen.CompareAndSwap(true, false) {
 		return nil

udp/udp_tester.go

@@ -131,6 +131,14 @@ func (u *TesterConn) SupportsMultipleReaders() bool {
 	return false
 }
 
+func (u *TesterConn) SupportsGSO() bool {
+	return false
+}
+
+func (u *TesterConn) SupportsGRO() bool {
+	return false
+}
+
 func (u *TesterConn) Rebind() error {
 	return nil
 }
@@ -142,3 +150,12 @@ func (u *TesterConn) Close() error {
 	}
 	return nil
 }
+
+func (u *TesterConn) WriteBatch(pkts []BatchPacket) (int, error) {
+	for i := range pkts {
+		if err := u.WriteTo(pkts[i].Payload, pkts[i].Addr); err != nil {
+			return i, err
+		}
+	}
+	return len(pkts), nil
+}