Compare commits

..

11 Commits

Author SHA1 Message Date
Jay Wren 7794e93762 Address PR feedback: remove outbound rate limit, improve config docs
Remove rate limiting from StartHandshake (outbound) since DoS
protection only needs to limit inbound handshakes. This also avoids
returning nil from StartHandshake which historically always returned
non-nil. Update config comment to note openssl speed is single-core
and suggest scaling by routines.

Co-Authored-By: Claude <svc-devxp-claude@slack-corp.com>
2026-04-10 14:36:32 -04:00
Jay Wren 3df60ae195 Add handshakes.max_rate to limit new handshakes per second
Nebula is vulnerable to DoS via handshake flooding since each incoming
  handshake performs expensive DH operations. This adds a token bucket
  rate limiter to the handshake manager that caps both inbound and
  outbound new handshakes per second. When the limit is reached, new
  handshakes are silently dropped and counted via the
  handshake_manager.rate_limited metric.

  Configured via handshakes.max_rate (default 0 = unlimited).

  Co-Authored-By: Claude <svc-devxp-claude@slack-corp.com>
2026-03-30 15:45:38 -04:00
Jack Doan 91d1f4675a properly handle closetunnel packets (#1638) 2026-03-25 11:59:37 -05:00
John Maguire 9f1aef53fa Fix dissector logic (#1626)
* Fix typo in Wireshark dissector

* Fix wireshark dissector prefs_changed logic

The previous logic had several issues:
- Changing only the port number (without toggling all_ports) would
  not re-register the dissector on the new port.
- Turning all_ports off would remove all registrations but only
  re-add the specific port inside a branch that also required
  all_ports to have changed, and never updated default_settings.port.

Simplify to: remove all registrations, then register based on current
prefs, then update the cached state.
2026-03-23 11:15:40 -04:00
Jay R. Wren 1aa1a0476f #ECCN:Open Source in CODEOWNERS (#1632)
gofmt / Run gofmt (push) Failing after 3s
smoke-extra / Run extra smoke tests (push) Failing after 3s
smoke / Run multi node smoke test (push) Failing after 2s
Build and test / Build all and test on ubuntu-linux (push) Failing after 3s
Build and test / Build and test on linux with boringcrypto (push) Failing after 2s
Build and test / Build and test on linux with pkcs11 (push) Failing after 3s
Build and test / Build and test on macos-latest (push) Has been cancelled
Build and test / Build and test on windows-latest (push) Has been cancelled
Salesforce is requesting this in all opensource repositories
2026-03-16 17:07:40 -04:00
Jay R. Wren 7760ccefba fix logging copy pasta (#1621)
gofmt / Run gofmt (push) Failing after 3s
smoke-extra / Run extra smoke tests (push) Failing after 3s
smoke / Run multi node smoke test (push) Failing after 2s
Build and test / Build all and test on ubuntu-linux (push) Failing after 3s
Build and test / Build and test on linux with boringcrypto (push) Failing after 3s
Build and test / Build and test on linux with pkcs11 (push) Failing after 2s
Build and test / Build and test on macos-latest (push) Has been cancelled
Build and test / Build and test on windows-latest (push) Has been cancelled
2026-03-06 14:03:32 -05:00
Jack Doan 51308b845b connection-track ICMP traffic (#1602)
gofmt / Run gofmt (push) Failing after 2s
smoke-extra / Run extra smoke tests (push) Failing after 3s
smoke / Run multi node smoke test (push) Failing after 2s
Build and test / Build all and test on ubuntu-linux (push) Failing after 2s
Build and test / Build and test on linux with boringcrypto (push) Failing after 2s
Build and test / Build and test on linux with pkcs11 (push) Failing after 2s
Build and test / Build and test on macos-latest (push) Has been cancelled
Build and test / Build and test on windows-latest (push) Has been cancelled
* connection-track ICMP and ICMPv6 traffic

* icmpv6 only has identifier on echo
2026-02-18 23:19:37 -06:00
Wade Simmons 422fc2ad1e go fix (#1608)
gofmt / Run gofmt (push) Failing after 3s
smoke-extra / Run extra smoke tests (push) Failing after 2s
smoke / Run multi node smoke test (push) Failing after 2s
Build and test / Build all and test on ubuntu-linux (push) Failing after 2s
Build and test / Build and test on linux with boringcrypto (push) Failing after 3s
Build and test / Build and test on linux with pkcs11 (push) Failing after 2s
Build and test / Build and test on macos-latest (push) Has been cancelled
Build and test / Build and test on windows-latest (push) Has been cancelled
2026-02-17 11:42:14 -05:00
Wade Simmons e8bb874e14 smoke-extra: try AMD-V workaround (#1610)
gofmt / Run gofmt (push) Failing after 3s
smoke-extra / Run extra smoke tests (push) Failing after 2s
smoke / Run multi node smoke test (push) Failing after 2s
Build and test / Build all and test on ubuntu-linux (push) Failing after 3s
Build and test / Build and test on linux with boringcrypto (push) Failing after 2s
Build and test / Build and test on linux with pkcs11 (push) Failing after 2s
Build and test / Build and test on macos-latest (push) Has been cancelled
Build and test / Build and test on windows-latest (push) Has been cancelled
* smoke-extra: try AMD-V workaround

- https://github.com/slackhq/nebula/actions/runs/21995850645/job/63555492676?pr=1602
- https://github.com/actions/runner-images/issues/13202
- https://github.com/cri-o/packaging/pull/306/changes
2026-02-13 12:55:19 -06:00
Jack Doan 353ad1f271 firewall: icmp no longer requires a port spec (#1609) 2026-02-13 11:10:40 -06:00
Jack Doan f573e8a266 Merge commit from fork
gofmt / Run gofmt (push) Failing after 3s
smoke-extra / Run extra smoke tests (push) Failing after 2s
smoke / Run multi node smoke test (push) Failing after 3s
Build and test / Build all and test on ubuntu-linux (push) Failing after 2s
Build and test / Build and test on linux with boringcrypto (push) Failing after 3s
Build and test / Build and test on linux with pkcs11 (push) Failing after 2s
Build and test / Build and test on macos-latest (push) Has been cancelled
Build and test / Build and test on windows-latest (push) Has been cancelled
Newly signed P256 based certificates will have their signature clamped to the low-s form.

Update CHANGELOG.md
2026-02-06 14:26:51 -05:00
47 changed files with 1004 additions and 359 deletions
+3
View File
@@ -30,6 +30,9 @@ jobs:
- name: add hashicorp source
run: wget -O- https://apt.releases.hashicorp.com/gpg | gpg --dearmor | sudo tee /usr/share/keyrings/hashicorp-archive-keyring.gpg && echo "deb [signed-by=/usr/share/keyrings/hashicorp-archive-keyring.gpg] https://apt.releases.hashicorp.com $(lsb_release -cs) main" | sudo tee /etc/apt/sources.list.d/hashicorp.list
- name: workaround AMD-V issue # https://github.com/cri-o/packaging/pull/306
run: sudo rmmod kvm_amd
- name: install vagrant
run: sudo apt-get update && sudo apt-get install -y vagrant virtualbox
+10 -9
View File
@@ -37,17 +37,18 @@ docker run --name host4 --device /dev/net/tun:/dev/net/tun --cap-add NET_ADMIN -
sleep 1
# grab tcpdump pcaps for debugging
docker exec lighthouse1 tcpdump -i nebula1 -q -w - -U 2>logs/lighthouse1.inside.log >logs/lighthouse1.inside.pcap &
docker exec lighthouse1 tcpdump -i tun0 -q -w - -U 2>logs/lighthouse1.inside.log >logs/lighthouse1.inside.pcap &
docker exec lighthouse1 tcpdump -i eth0 -q -w - -U 2>logs/lighthouse1.outside.log >logs/lighthouse1.outside.pcap &
docker exec host2 tcpdump -i nebula1 -q -w - -U 2>logs/host2.inside.log >logs/host2.inside.pcap &
docker exec host2 tcpdump -i tun0 -q -w - -U 2>logs/host2.inside.log >logs/host2.inside.pcap &
docker exec host2 tcpdump -i eth0 -q -w - -U 2>logs/host2.outside.log >logs/host2.outside.pcap &
docker exec host3 tcpdump -i nebula1 -q -w - -U 2>logs/host3.inside.log >logs/host3.inside.pcap &
docker exec host3 tcpdump -i tun0 -q -w - -U 2>logs/host3.inside.log >logs/host3.inside.pcap &
docker exec host3 tcpdump -i eth0 -q -w - -U 2>logs/host3.outside.log >logs/host3.outside.pcap &
docker exec host4 tcpdump -i nebula1 -q -w - -U 2>logs/host4.inside.log >logs/host4.inside.pcap &
docker exec host4 tcpdump -i tun0 -q -w - -U 2>logs/host4.inside.log >logs/host4.inside.pcap &
docker exec host4 tcpdump -i eth0 -q -w - -U 2>logs/host4.outside.log >logs/host4.outside.pcap &
docker exec host2 ncat -nklv 0.0.0.0 2000 &
docker exec host3 ncat -nklv 0.0.0.0 2000 &
docker exec host4 ncat -nkluv 0.0.0.0 4000 &
docker exec host2 ncat -e '/usr/bin/echo host2' -nkluv 0.0.0.0 3000 &
docker exec host3 ncat -e '/usr/bin/echo host3' -nkluv 0.0.0.0 3000 &
@@ -119,11 +120,11 @@ echo
echo " *** Testing conntrack"
echo
set -x
# host2 can ping host3 now that host3 pinged it first
docker exec host2 ping -c1 192.168.100.3
# host4 can ping host2 once conntrack established
docker exec host2 ping -c1 192.168.100.4
docker exec host4 ping -c1 192.168.100.2
# host2 speaking to host4 on UDP 4000 should allow it to reply, when firewall rules would normally not permit this
docker exec host2 sh -c "/usr/bin/echo host2 | ncat -nuv 192.168.100.4 4000"
docker exec host2 ncat -e '/usr/bin/echo helloagainfromhost2' -nkluv 0.0.0.0 4000 &
docker exec host4 sh -c "/usr/bin/echo host4 | ncat -nuv 192.168.100.2 4000"
docker exec host4 sh -c 'kill 1'
docker exec host3 sh -c 'kill 1'
+15 -1
View File
@@ -7,6 +7,19 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
## [Unreleased]
## [1.10.3] - 2026-02-06
### Security
- Fix an issue where blocklist bypass is possible when using curve P256 since the signature can have 2 valid representations.
Both fingerprint representations will be tested against the blocklist.
Any newly issued P256 based certificates will have their signature clamped to the low-s form.
Nebula will assert the low-s signature form when validating certificates in a future version. [GHSA-69x3-g4r3-p962](https://github.com/slackhq/nebula/security/advisories/GHSA-69x3-g4r3-p962)
### Changed
- Improve error reporting if nebula fails to start due to a tun device naming issue. (#1588)
## [1.10.2] - 2026-01-21
### Fixed
@@ -775,7 +788,8 @@ created.)
- Initial public release.
[Unreleased]: https://github.com/slackhq/nebula/compare/v1.10.2...HEAD
[Unreleased]: https://github.com/slackhq/nebula/compare/v1.10.3...HEAD
[1.10.3]: https://github.com/slackhq/nebula/releases/tag/v1.10.3
[1.10.2]: https://github.com/slackhq/nebula/releases/tag/v1.10.2
[1.10.1]: https://github.com/slackhq/nebula/releases/tag/v1.10.1
[1.10.0]: https://github.com/slackhq/nebula/releases/tag/v1.10.0
+1
View File
@@ -0,0 +1 @@
#ECCN:Open Source
-1
View File
@@ -1,5 +1,4 @@
//go:build boringcrypto
// +build boringcrypto
package nebula
+18
View File
@@ -141,10 +141,23 @@ func (ncp *CAPool) VerifyCertificate(now time.Time, c Certificate) (*CachedCerti
return nil, err
}
// Pre nebula v1.10.3 could generate signatures in either high or low s form and validation
// of signatures allowed for either. Nebula v1.10.3 and beyond clamps signature generation to low-s form
// but validation still allows for either. Since a change in the signature bytes affects the fingerprint, we
// need to test both forms until such a time comes that we enforce low-s form on signature validation.
fp2, err := CalculateAlternateFingerprint(c)
if err != nil {
return nil, fmt.Errorf("could not calculate alternate fingerprint to verify: %w", err)
}
if fp2 != "" && ncp.IsBlocklisted(fp2) {
return nil, ErrBlockListed
}
cc := CachedCertificate{
Certificate: c,
InvertedGroups: make(map[string]struct{}),
Fingerprint: fp,
fingerprint2: fp2,
signerFingerprint: signer.Fingerprint,
}
@@ -158,6 +171,11 @@ func (ncp *CAPool) VerifyCertificate(now time.Time, c Certificate) (*CachedCerti
// VerifyCachedCertificate is the same as VerifyCertificate other than it operates on a pre-verified structure and
// is a cheaper operation to perform as a result.
func (ncp *CAPool) VerifyCachedCertificate(now time.Time, c *CachedCertificate) error {
// Check any available alternate fingerprint forms for this certificate, re P256 high-s/low-s
if c.fingerprint2 != "" && ncp.IsBlocklisted(c.fingerprint2) {
return ErrBlockListed
}
_, err := ncp.verify(c.Certificate, now, c.Fingerprint, c.signerFingerprint)
return err
}
+43 -4
View File
@@ -5,6 +5,7 @@ import (
"testing"
"time"
"github.com/slackhq/nebula/cert/p256"
"github.com/stretchr/testify/assert"
"github.com/stretchr/testify/require"
)
@@ -170,6 +171,15 @@ func TestCertificateV1_VerifyP256(t *testing.T) {
_, err = caPool.VerifyCertificate(time.Now(), c)
require.EqualError(t, err, "certificate is in the block list")
// Create a copy of the cert and swap to the alternate form for the signature
nc := c.Copy()
b, err := p256.Swap(c.Signature())
require.NoError(t, err)
require.NoError(t, nc.(*certificateV1).setSignature(b))
_, err = caPool.VerifyCertificate(time.Now(), nc)
require.EqualError(t, err, "certificate is in the block list")
caPool.ResetCertBlocklist()
_, err = caPool.VerifyCertificate(time.Now(), c)
require.NoError(t, err)
@@ -187,7 +197,7 @@ func TestCertificateV1_VerifyP256(t *testing.T) {
require.NoError(t, err)
caPool = NewCAPool()
b, err := caPool.AddCAFromPEM(caPem)
b, err = caPool.AddCAFromPEM(caPem)
require.NoError(t, err)
assert.Empty(t, b)
@@ -196,7 +206,17 @@ func TestCertificateV1_VerifyP256(t *testing.T) {
})
c, _, _, _ = NewTestCert(Version1, Curve_P256, ca, caKey, "test", time.Now(), time.Now().Add(5*time.Minute), nil, nil, []string{"test1"})
_, err = caPool.VerifyCertificate(time.Now(), c)
cc, err := caPool.VerifyCertificate(time.Now(), c)
require.NoError(t, err)
// Reset the blocklist and block the alternate form fingerprint
caPool.ResetCertBlocklist()
caPool.BlocklistFingerprint(cc.fingerprint2)
err = caPool.VerifyCachedCertificate(time.Now(), cc)
require.EqualError(t, err, "certificate is in the block list")
caPool.ResetCertBlocklist()
err = caPool.VerifyCachedCertificate(time.Now(), cc)
require.NoError(t, err)
}
@@ -394,6 +414,15 @@ func TestCertificateV2_VerifyP256(t *testing.T) {
_, err = caPool.VerifyCertificate(time.Now(), c)
require.EqualError(t, err, "certificate is in the block list")
// Create a copy of the cert and swap to the alternate form for the signature
nc := c.Copy()
b, err := p256.Swap(c.Signature())
require.NoError(t, err)
require.NoError(t, nc.(*certificateV2).setSignature(b))
_, err = caPool.VerifyCertificate(time.Now(), nc)
require.EqualError(t, err, "certificate is in the block list")
caPool.ResetCertBlocklist()
_, err = caPool.VerifyCertificate(time.Now(), c)
require.NoError(t, err)
@@ -411,7 +440,7 @@ func TestCertificateV2_VerifyP256(t *testing.T) {
require.NoError(t, err)
caPool = NewCAPool()
b, err := caPool.AddCAFromPEM(caPem)
b, err = caPool.AddCAFromPEM(caPem)
require.NoError(t, err)
assert.Empty(t, b)
@@ -420,7 +449,17 @@ func TestCertificateV2_VerifyP256(t *testing.T) {
})
c, _, _, _ = NewTestCert(Version2, Curve_P256, ca, caKey, "test", time.Now(), time.Now().Add(5*time.Minute), nil, nil, []string{"test1"})
_, err = caPool.VerifyCertificate(time.Now(), c)
cc, err := caPool.VerifyCertificate(time.Now(), c)
require.NoError(t, err)
// Reset the blocklist and block the alternate form fingerprint
caPool.ResetCertBlocklist()
caPool.BlocklistFingerprint(cc.fingerprint2)
err = caPool.VerifyCachedCertificate(time.Now(), cc)
require.EqualError(t, err, "certificate is in the block list")
caPool.ResetCertBlocklist()
err = caPool.VerifyCachedCertificate(time.Now(), cc)
require.NoError(t, err)
}
+33
View File
@@ -4,6 +4,8 @@ import (
"fmt"
"net/netip"
"time"
"github.com/slackhq/nebula/cert/p256"
)
type Version uint8
@@ -110,6 +112,9 @@ type CachedCertificate struct {
InvertedGroups map[string]struct{}
Fingerprint string
signerFingerprint string
// A place to store a 2nd fingerprint if the certificate could have one, such as with P256
fingerprint2 string
}
func (cc *CachedCertificate) String() string {
@@ -152,3 +157,31 @@ func Recombine(v Version, rawCertBytes, publicKey []byte, curve Curve) (Certific
return c, nil
}
// CalculateAlternateFingerprint calculates a 2nd fingerprint representation for P256 certificates
// CAPool blocklist testing through `VerifyCertificate` and `VerifyCachedCertificate` automatically performs this step.
func CalculateAlternateFingerprint(c Certificate) (string, error) {
if c.Curve() != Curve_P256 {
return "", nil
}
nc := c.Copy()
b, err := p256.Swap(nc.Signature())
if err != nil {
return "", err
}
switch v := nc.(type) {
case *certificateV1:
err = v.setSignature(b)
case *certificateV2:
err = v.setSignature(b)
default:
return "", ErrUnknownVersion
}
if err != nil {
return "", err
}
return nc.Fingerprint()
}
+122
View File
@@ -0,0 +1,122 @@
package p256
import (
"crypto/elliptic"
"errors"
"math/big"
"filippo.io/bigmod"
"golang.org/x/crypto/cryptobyte"
"golang.org/x/crypto/cryptobyte/asn1"
)
var halfN = new(big.Int).Rsh(elliptic.P256().Params().N, 1)
var nMod *bigmod.Modulus
func init() {
n, err := bigmod.NewModulus(elliptic.P256().Params().N.Bytes())
if err != nil {
panic(err)
}
nMod = n
}
func IsNormalized(sig []byte) (bool, error) {
r, s, err := parseSignature(sig)
if err != nil {
return false, err
}
return checkLowS(r, s), nil
}
func checkLowS(_, s []byte) bool {
bigS := new(big.Int).SetBytes(s)
// Check if S <= (N/2), because we want to include the midpoint in the set of low-s
return bigS.Cmp(halfN) <= 0
}
func swap(r, s []byte) ([]byte, []byte, error) {
var err error
bigS, err := bigmod.NewNat().SetBytes(s, nMod)
if err != nil {
return nil, nil, err
}
sNormalized := nMod.Nat().Sub(bigS, nMod)
return r, sNormalized.Bytes(nMod), nil
}
func Normalize(sig []byte) ([]byte, error) {
r, s, err := parseSignature(sig)
if err != nil {
return nil, err
}
if checkLowS(r, s) {
return sig, nil
}
newR, newS, err := swap(r, s)
if err != nil {
return nil, err
}
return encodeSignature(newR, newS)
}
// Swap will change sig between its current form to the opposite high or low form.
func Swap(sig []byte) ([]byte, error) {
r, s, err := parseSignature(sig)
if err != nil {
return nil, err
}
newR, newS, err := swap(r, s)
if err != nil {
return nil, err
}
return encodeSignature(newR, newS)
}
// parseSignature taken exactly from crypto/ecdsa/ecdsa.go
func parseSignature(sig []byte) (r, s []byte, err error) {
var inner cryptobyte.String
input := cryptobyte.String(sig)
if !input.ReadASN1(&inner, asn1.SEQUENCE) ||
!input.Empty() ||
!inner.ReadASN1Integer(&r) ||
!inner.ReadASN1Integer(&s) ||
!inner.Empty() {
return nil, nil, errors.New("invalid ASN.1")
}
return r, s, nil
}
func encodeSignature(r, s []byte) ([]byte, error) {
var b cryptobyte.Builder
b.AddASN1(asn1.SEQUENCE, func(b *cryptobyte.Builder) {
addASN1IntBytes(b, r)
addASN1IntBytes(b, s)
})
return b.Bytes()
}
// addASN1IntBytes encodes in ASN.1 a positive integer represented as
// a big-endian byte slice with zero or more leading zeroes.
func addASN1IntBytes(b *cryptobyte.Builder, bytes []byte) {
for len(bytes) > 0 && bytes[0] == 0 {
bytes = bytes[1:]
}
if len(bytes) == 0 {
b.SetError(errors.New("invalid integer"))
return
}
b.AddASN1(asn1.INTEGER, func(c *cryptobyte.Builder) {
if bytes[0]&0x80 != 0 {
c.AddUint8(0)
}
c.AddBytes(bytes)
})
}
+28
View File
@@ -0,0 +1,28 @@
package p256
import (
"crypto/ecdsa"
"crypto/elliptic"
"crypto/rand"
"testing"
"github.com/stretchr/testify/require"
)
func TestFlipping(t *testing.T) {
priv, err1 := ecdsa.GenerateKey(elliptic.P256(), rand.Reader)
require.NoError(t, err1)
out, err := ecdsa.SignASN1(rand.Reader, priv, []byte("big chungus"))
require.NoError(t, err)
r, s, err := parseSignature(out)
require.NoError(t, err)
r, s1, err := swap(r, s)
require.NoError(t, err)
r, s2, err := swap(r, s1)
require.NoError(t, err)
require.Equal(t, s, s2)
require.NotEqual(t, s, s1)
}
+9
View File
@@ -9,6 +9,8 @@ import (
"fmt"
"net/netip"
"time"
"github.com/slackhq/nebula/cert/p256"
)
// TBSCertificate represents a certificate intended to be signed.
@@ -126,6 +128,13 @@ func (t *TBSCertificate) SignWith(signer Certificate, curve Curve, sp SignerLamb
return nil, err
}
if curve == Curve_P256 {
sig, err = p256.Normalize(sig)
if err != nil {
return nil, err
}
}
err = c.setSignature(sig)
if err != nil {
return nil, err
+46
View File
@@ -9,6 +9,7 @@ import (
"testing"
"time"
"github.com/slackhq/nebula/cert/p256"
"github.com/stretchr/testify/assert"
"github.com/stretchr/testify/require"
)
@@ -89,3 +90,48 @@ func TestCertificateV1_SignP256(t *testing.T) {
require.NoError(t, err)
assert.NotNil(t, uc)
}
func TestCertificate_SignP256_AlwaysNormalized(t *testing.T) {
before := time.Now().Add(time.Second * -60).Round(time.Second)
after := time.Now().Add(time.Second * 60).Round(time.Second)
pubKey := []byte("01234567890abcedfghij1234567890ab1234567890abcedfghij1234567890ab")
tbs := TBSCertificate{
Version: Version1,
Name: "testing",
Networks: []netip.Prefix{
mustParsePrefixUnmapped("10.1.1.1/24"),
mustParsePrefixUnmapped("10.1.1.2/16"),
},
UnsafeNetworks: []netip.Prefix{
mustParsePrefixUnmapped("9.1.1.2/24"),
mustParsePrefixUnmapped("9.1.1.3/16"),
},
Groups: []string{"test-group1", "test-group2", "test-group3"},
NotBefore: before,
NotAfter: after,
PublicKey: pubKey,
IsCA: true,
Curve: Curve_P256,
}
priv, err := ecdsa.GenerateKey(elliptic.P256(), rand.Reader)
require.NoError(t, err)
pub := elliptic.Marshal(elliptic.P256(), priv.PublicKey.X, priv.PublicKey.Y)
rawPriv := priv.D.FillBytes(make([]byte, 32))
for i := 0; i < 1000; i++ {
if i&1 == 1 {
tbs.Version = Version1
} else {
tbs.Version = Version2
}
c, err := tbs.Sign(nil, Curve_P256, rawPriv)
require.NoError(t, err)
assert.NotNil(t, c)
assert.True(t, c.CheckSignature(pub))
normie, err := p256.IsNormalized(c.Signature())
require.NoError(t, err)
assert.True(t, normie)
}
}
+2 -10
View File
@@ -78,16 +78,8 @@ func main() {
}
if !*configTest {
wait, err := ctrl.Start()
if err != nil {
util.LogWithContextIfNeeded("Error while running", err, l)
os.Exit(1)
}
go ctrl.ShutdownBlock()
wait()
l.Info("Goodbye")
ctrl.Start()
ctrl.ShutdownBlock()
}
os.Exit(0)
+2 -10
View File
@@ -72,17 +72,9 @@ func main() {
}
if !*configTest {
wait, err := ctrl.Start()
if err != nil {
util.LogWithContextIfNeeded("Error while running", err, l)
os.Exit(1)
}
go ctrl.ShutdownBlock()
ctrl.Start()
notifyReady(l)
wait()
l.Info("Goodbye")
ctrl.ShutdownBlock()
}
os.Exit(0)
+6 -50
View File
@@ -2,11 +2,9 @@ package nebula
import (
"context"
"errors"
"net/netip"
"os"
"os/signal"
"sync"
"syscall"
"github.com/sirupsen/logrus"
@@ -15,16 +13,6 @@ import (
"github.com/slackhq/nebula/overlay"
)
type RunState int
const (
Stopped RunState = 0 // The control has yet to be started
Started RunState = 1 // The control has been started
Stopping RunState = 2 // The control is stopping
)
var ErrAlreadyStarted = errors.New("nebula is already started")
// Every interaction here needs to take extra care to copy memory and not return or use arguments "as is" when touching
// core. This means copying IP objects, slices, de-referencing pointers and taking the actual value, etc
@@ -38,9 +26,6 @@ type controlHostLister interface {
}
type Control struct {
stateLock sync.Mutex
state RunState
f *Interface
l *logrus.Logger
ctx context.Context
@@ -64,21 +49,10 @@ type ControlHostInfo struct {
CurrentRelaysThroughMe []netip.Addr `json:"currentRelaysThroughMe"`
}
// Start actually runs nebula, this is a nonblocking call.
// The returned function can be used to wait for nebula to fully stop.
func (c *Control) Start() (func(), error) {
c.stateLock.Lock()
if c.state != Stopped {
c.stateLock.Unlock()
return nil, ErrAlreadyStarted
}
// Start actually runs nebula, this is a nonblocking call. To block use Control.ShutdownBlock()
func (c *Control) Start() {
// Activate the interface
err := c.f.activate()
if err != nil {
c.stateLock.Unlock()
return nil, err
}
c.f.activate()
// Call all the delayed funcs that waited patiently for the interface to be created.
if c.sshStart != nil {
@@ -98,33 +72,15 @@ func (c *Control) Start() (func(), error) {
}
// Start reading packets.
c.state = Started
c.stateLock.Unlock()
return c.f.run()
}
func (c *Control) State() RunState {
c.stateLock.Lock()
defer c.stateLock.Unlock()
return c.state
c.f.run()
}
func (c *Control) Context() context.Context {
return c.ctx
}
// Stop is a non-blocking call that signals nebula to close all tunnels and shut down
// Stop signals nebula to shutdown and close all tunnels, returns after the shutdown is complete
func (c *Control) Stop() {
c.stateLock.Lock()
if c.state != Started {
c.stateLock.Unlock()
// We are stopping or stopped already
return
}
c.state = Stopping
c.stateLock.Unlock()
// Stop the handshakeManager (and other services), to prevent new tunnels from
// being created while we're shutting them all down.
c.cancel()
@@ -133,7 +89,7 @@ func (c *Control) Stop() {
if err := c.f.Close(); err != nil {
c.l.WithError(err).Error("Close interface failed")
}
c.state = Stopped
c.l.Info("Goodbye")
}
// ShutdownBlock will listen for and block on term and interrupt signals, calling Control.Stop() once signalled
-1
View File
@@ -1,5 +1,4 @@
//go:build e2e_testing
// +build e2e_testing
package nebula
+8 -14
View File
@@ -84,30 +84,24 @@ end
function nebula.prefs_changed()
if default_settings.all_ports == nebula.prefs.all_ports and default_settings.port == nebula.prefs.port then
-- Nothing changed, bail
return
end
-- Remove our old dissector
-- Remove all existing registrations
DissectorTable.get("udp.port"):remove_all(nebula)
if nebula.prefs.all_ports and default_settings.all_ports ~= nebula.prefs.all_ports then
default_settings.all_port = nebula.prefs.all_ports
if nebula.prefs.all_ports then
-- Register on every port for hole punch capture
for i=0, 65535 do
DissectorTable.get("udp.port"):add(i, nebula)
end
-- no need to establish again on specific ports
return
else
-- Register on the configured port only
DissectorTable.get("udp.port"):add(nebula.prefs.port, nebula)
end
if default_settings.all_ports ~= nebula.prefs.all_ports then
-- Add our new port dissector
default_settings.port = nebula.prefs.port
DissectorTable.get("udp.port"):add(default_settings.port, nebula)
end
default_settings.all_ports = nebula.prefs.all_ports
default_settings.port = nebula.prefs.port
end
DissectorTable.get("udp.port"):add(default_settings.port, nebula)
+105
View File
@@ -12,6 +12,8 @@ import (
"github.com/slackhq/nebula/cert"
"github.com/slackhq/nebula/cert_test"
"github.com/slackhq/nebula/e2e/router"
"github.com/slackhq/nebula/header"
"github.com/slackhq/nebula/udp"
"github.com/stretchr/testify/assert"
"gopkg.in/yaml.v3"
)
@@ -365,3 +367,106 @@ func TestCrossStackRelaysWork(t *testing.T) {
//theirControl.Stop()
//relayControl.Stop()
}
func TestCloseTunnelAuthenticated(t *testing.T) {
ca, _, caKey, _ := cert_test.NewTestCaCert(cert.Version1, cert.Curve_CURVE25519, time.Now(), time.Now().Add(10*time.Minute), nil, nil, []string{})
myControl, myVpnIpNet, myUdpAddr, _ := newSimpleServer(cert.Version1, ca, caKey, "me", "10.128.0.1/24", m{"tunnels": m{"drop_inactive": true, "inactivity_timeout": "5s"}})
theirControl, theirVpnIpNet, theirUdpAddr, _ := newSimpleServer(cert.Version1, ca, caKey, "them", "10.128.0.2/24", m{"tunnels": m{"drop_inactive": true, "inactivity_timeout": "10m"}})
// Share our underlay information
myControl.InjectLightHouseAddr(theirVpnIpNet[0].Addr(), theirUdpAddr)
theirControl.InjectLightHouseAddr(myVpnIpNet[0].Addr(), myUdpAddr)
// Start the servers
myControl.Start()
theirControl.Start()
r := router.NewR(t, myControl, theirControl)
r.Log("Assert the tunnel between me and them works")
assertTunnel(t, myVpnIpNet[0].Addr(), theirVpnIpNet[0].Addr(), myControl, theirControl, r)
r.Log("Close the tunnel")
myControl.CloseTunnel(theirVpnIpNet[0].Addr(), false)
r.FlushAll()
waitStart := time.Now()
for {
myIndexes := len(myControl.GetHostmap().Indexes)
theirIndexes := len(theirControl.GetHostmap().Indexes)
if myIndexes == 0 && theirIndexes == 0 {
break
}
since := time.Since(waitStart)
r.Logf("my tunnels: %v; their tunnels: %v; duration: %v", myIndexes, theirIndexes, since)
if since > time.Second*6 {
t.Fatal("Tunnel should have been declared inactive after 2 seconds and before 6 seconds")
}
time.Sleep(1 * time.Second)
//r.FlushAll()
}
r.Logf("Happy path success, tunnels were dropped within %v", time.Since(waitStart))
myControl.InjectLightHouseAddr(theirVpnIpNet[0].Addr(), theirUdpAddr)
theirControl.InjectLightHouseAddr(myVpnIpNet[0].Addr(), myUdpAddr)
r.Log("Assert another tunnel between me and them works")
assertTunnel(t, myVpnIpNet[0].Addr(), theirVpnIpNet[0].Addr(), myControl, theirControl, r)
hi := myControl.GetHostInfoByVpnAddr(theirVpnIpNet[0].Addr(), false)
if hi == nil {
t.Fatal("There is no hostinfo for this tunnel")
}
myHi := theirControl.GetHostInfoByVpnAddr(myVpnIpNet[0].Addr(), false)
if myHi == nil {
t.Fatal("There is no hostinfo for my tunnel")
}
r.Log("It does")
buf := make([]byte, 1024)
hdr := header.H{
Version: 1,
Type: header.CloseTunnel,
Subtype: 0,
Reserved: 0,
RemoteIndex: hi.RemoteIndex,
MessageCounter: 5,
}
out, err := hdr.Encode(buf)
if err != nil {
t.Fatal(err)
}
pkt := &udp.Packet{
To: hi.CurrentRemote,
From: myHi.CurrentRemote,
Data: out,
}
r.InjectUDPPacket(myControl, theirControl, pkt)
r.Log("Injected bogus close tunnel. Let's see!")
waitStart = time.Now()
for {
myIndexes := len(myControl.GetHostmap().Indexes)
theirIndexes := len(theirControl.GetHostmap().Indexes)
if myIndexes == 0 {
t.Fatal("myIndexes should not be 0")
}
if theirIndexes == 0 {
t.Fatal("theirIndexes should not be 0, they should have rejected this bogus packet")
}
since := time.Since(waitStart)
r.Logf("my tunnels: %v; their tunnels: %v; duration: %v", myIndexes, theirIndexes, since)
if since > time.Second*4 {
t.Log("The tunnel would have been gone by now")
break
}
time.Sleep(1 * time.Second)
r.FlushAll()
}
myControl.Stop()
theirControl.Stop()
}
+9 -1
View File
@@ -342,6 +342,14 @@ logging:
# after receiving the response for lighthouse queries
#trigger_buffer: 64
# max_rate limits the number of new inbound handshakes per second. Once the limit is reached,
# new handshakes are dropped until the next second. A value of 0 means unlimited (default).
# This is useful for preventing DoS attacks that attempt to exhaust CPU with handshake crypto.
# Running `openssl speed ecdhp256` on your hardware can be a good rule of thumb for choosing
# a max, as each handshake performs similar DH operations. Note that this benchmarks a single
# core, so you may wish to scale the value by the number of `routines` configured.
#max_rate: 0
# Tunnel manager settings
#tunnels:
# drop_inactive controls whether inactive tunnels are maintained or dropped after the inactive_timeout period has
@@ -382,8 +390,8 @@ firewall:
# Rules are comprised of a protocol, port, and one or more of host, group, or CIDR
# Logical evaluation is roughly: port AND proto AND (ca_sha OR ca_name) AND (host OR group OR groups OR cidr) AND (local cidr)
# - port: Takes `0` or `any` as any, a single number `80`, a range `200-901`, or `fragment` to match second and further fragments of fragmented packets (since there is no port available).
# code: same as port but makes more sense when talking about ICMP, TODO: this is not currently implemented in a way that works, use `any`
# proto: `any`, `tcp`, `udp`, or `icmp`
# a port specification is ignored if proto is `icmp`
# host: `any` or a literal hostname, ie `test-host`
# group: `any` or a literal group name, ie `default-group`
# groups: Same as group but accepts a list of values. Multiple values are AND'd together and a certificate would have to contain all groups to pass
+84 -64
View File
@@ -230,7 +230,7 @@ func NewFirewallFromConfig(l *logrus.Logger, cs *CertState, c *config.C) (*Firew
case "drop":
fw.OutSendReject = false
default:
l.WithField("action", inboundAction).Warn("invalid firewall.outbound_action, defaulting to `drop`")
l.WithField("action", outboundAction).Warn("invalid firewall.outbound_action, defaulting to `drop`")
fw.OutSendReject = false
}
@@ -249,20 +249,6 @@ func NewFirewallFromConfig(l *logrus.Logger, cs *CertState, c *config.C) (*Firew
// AddRule properly creates the in memory rule structure for a firewall table.
func (f *Firewall) AddRule(incoming bool, proto uint8, startPort int32, endPort int32, groups []string, host string, cidr, localCidr, caName string, caSha string) error {
// We need this rule string because we generate a hash. Removing this will break firewall reload.
ruleString := fmt.Sprintf(
"incoming: %v, proto: %v, startPort: %v, endPort: %v, groups: %v, host: %v, ip: %v, localIp: %v, caName: %v, caSha: %s",
incoming, proto, startPort, endPort, groups, host, cidr, localCidr, caName, caSha,
)
f.rules += ruleString + "\n"
direction := "incoming"
if !incoming {
direction = "outgoing"
}
f.l.WithField("firewallRule", m{"direction": direction, "proto": proto, "startPort": startPort, "endPort": endPort, "groups": groups, "host": host, "cidr": cidr, "localCidr": localCidr, "caName": caName, "caSha": caSha}).
Info("Firewall rule added")
var (
ft *FirewallTable
fp firewallPort
@@ -280,6 +266,12 @@ func (f *Firewall) AddRule(incoming bool, proto uint8, startPort int32, endPort
case firewall.ProtoUDP:
fp = ft.UDP
case firewall.ProtoICMP, firewall.ProtoICMPv6:
//ICMP traffic doesn't have ports, so we always coerce to "any", even if a value is provided
if startPort != firewall.PortAny {
f.l.WithField("startPort", startPort).Warn("ignoring port specification for ICMP firewall rule")
}
startPort = firewall.PortAny
endPort = firewall.PortAny
fp = ft.ICMP
case firewall.ProtoAny:
fp = ft.AnyProto
@@ -287,6 +279,20 @@ func (f *Firewall) AddRule(incoming bool, proto uint8, startPort int32, endPort
return fmt.Errorf("unknown protocol %v", proto)
}
// We need this rule string because we generate a hash. Removing this will break firewall reload.
ruleString := fmt.Sprintf(
"incoming: %v, proto: %v, startPort: %v, endPort: %v, groups: %v, host: %v, ip: %v, localIp: %v, caName: %v, caSha: %s",
incoming, proto, startPort, endPort, groups, host, cidr, localCidr, caName, caSha,
)
f.rules += ruleString + "\n"
direction := "incoming"
if !incoming {
direction = "outgoing"
}
f.l.WithField("firewallRule", m{"direction": direction, "proto": proto, "startPort": startPort, "endPort": endPort, "groups": groups, "host": host, "cidr": cidr, "localCidr": localCidr, "caName": caName, "caSha": caSha}).
Info("Firewall rule added")
return fp.addRule(f, startPort, endPort, groups, host, cidr, localCidr, caName, caSha)
}
@@ -349,24 +355,31 @@ func AddFirewallRulesFromConfig(l *logrus.Logger, inbound bool, c *config.C, fw
sPort = r.Port
}
startPort, endPort, err := parsePort(sPort)
if err != nil {
return fmt.Errorf("%s rule #%v; %s %s", table, i, errPort, err)
}
var proto uint8
var startPort, endPort int32
switch r.Proto {
case "any":
proto = firewall.ProtoAny
startPort, endPort, err = parsePort(sPort)
case "tcp":
proto = firewall.ProtoTCP
startPort, endPort, err = parsePort(sPort)
case "udp":
proto = firewall.ProtoUDP
startPort, endPort, err = parsePort(sPort)
case "icmp":
proto = firewall.ProtoICMP
startPort = firewall.PortAny
endPort = firewall.PortAny
if sPort != "" {
l.WithField("port", sPort).Warn("ignoring port specification for ICMP firewall rule")
}
default:
return fmt.Errorf("%s rule #%v; proto was not understood; `%s`", table, i, r.Proto)
}
if err != nil {
return fmt.Errorf("%s rule #%v; %s %s", table, i, errPort, err)
}
if r.Cidr != "" && r.Cidr != "any" {
_, err = netip.ParsePrefix(r.Cidr)
@@ -467,7 +480,7 @@ func (f *Firewall) metrics(incoming bool) firewallMetrics {
}
}
// Destroy cleans up any known cyclical references so the object can be free'd my GC. This should be called if a new
// Destroy cleans up any known cyclical references so the object can be freed by GC. This should be called if a new
// firewall object is created
func (f *Firewall) Destroy() {
//TODO: clean references if/when needed
@@ -660,6 +673,13 @@ func (fp firewallPort) match(p firewall.Packet, incoming bool, c *cert.CachedCer
return false
}
// this branch is here to catch traffic from FirewallTable.Any.match and FirewallTable.ICMP.match
if p.Protocol == firewall.ProtoICMP || p.Protocol == firewall.ProtoICMPv6 {
// port numbers are re-used for connection tracking of ICMP,
// but we don't want to actually filter on them.
return fp[firewall.PortAny].match(p, c, caPool)
}
var port int32
if p.Fragment {
@@ -804,10 +824,8 @@ func (fr *FirewallRule) isAny(groups []string, host string, cidr string) bool {
return true
}
for _, group := range groups {
if group == "any" {
return true
}
if slices.Contains(groups, "any") {
return true
}
if host == "any" {
@@ -1018,54 +1036,56 @@ func (r *rule) sanity() error {
}
}
if r.Code != "" {
return fmt.Errorf("code specified as [%s]. Support for 'code' will be dropped in a future release, as it has never been functional", r.Code)
}
//todo alert on cidr-any
return nil
}
func parsePort(s string) (startPort, endPort int32, err error) {
func parsePort(s string) (int32, int32, error) {
var err error
const notAPort int32 = -2
if s == "any" {
startPort = firewall.PortAny
endPort = firewall.PortAny
} else if s == "fragment" {
startPort = firewall.PortFragment
endPort = firewall.PortFragment
} else if strings.Contains(s, `-`) {
sPorts := strings.SplitN(s, `-`, 2)
sPorts[0] = strings.Trim(sPorts[0], " ")
sPorts[1] = strings.Trim(sPorts[1], " ")
if len(sPorts) != 2 || sPorts[0] == "" || sPorts[1] == "" {
return 0, 0, fmt.Errorf("appears to be a range but could not be parsed; `%s`", s)
}
rStartPort, err := strconv.Atoi(sPorts[0])
if err != nil {
return 0, 0, fmt.Errorf("beginning range was not a number; `%s`", sPorts[0])
}
rEndPort, err := strconv.Atoi(sPorts[1])
if err != nil {
return 0, 0, fmt.Errorf("ending range was not a number; `%s`", sPorts[1])
}
startPort = int32(rStartPort)
endPort = int32(rEndPort)
if startPort == firewall.PortAny {
endPort = firewall.PortAny
}
} else {
return firewall.PortAny, firewall.PortAny, nil
}
if s == "fragment" {
return firewall.PortFragment, firewall.PortFragment, nil
}
if !strings.Contains(s, `-`) {
rPort, err := strconv.Atoi(s)
if err != nil {
return 0, 0, fmt.Errorf("was not a number; `%s`", s)
return notAPort, notAPort, fmt.Errorf("was not a number; `%s`", s)
}
startPort = int32(rPort)
endPort = startPort
return int32(rPort), int32(rPort), nil
}
return
sPorts := strings.SplitN(s, `-`, 2)
for i := range sPorts {
sPorts[i] = strings.Trim(sPorts[i], " ")
}
if len(sPorts) != 2 || sPorts[0] == "" || sPorts[1] == "" {
return notAPort, notAPort, fmt.Errorf("appears to be a range but could not be parsed; `%s`", s)
}
rStartPort, err := strconv.Atoi(sPorts[0])
if err != nil {
return notAPort, notAPort, fmt.Errorf("beginning range was not a number; `%s`", sPorts[0])
}
rEndPort, err := strconv.Atoi(sPorts[1])
if err != nil {
return notAPort, notAPort, fmt.Errorf("ending range was not a number; `%s`", sPorts[1])
}
startPort := int32(rStartPort)
endPort := int32(rEndPort)
if startPort == firewall.PortAny {
endPort = firewall.PortAny
}
return startPort, endPort, nil
}
+6 -1
View File
@@ -22,7 +22,10 @@ const (
type Packet struct {
LocalAddr netip.Addr
RemoteAddr netip.Addr
LocalPort uint16
// LocalPort is the destination port for incoming traffic, or the source port for outgoing. Zero for ICMP.
LocalPort uint16
// RemotePort is the source port for incoming traffic, or the destination port for outgoing.
// For ICMP, it's the "identifier". This is only used for connection tracking, actual firewall rules will not filter on ICMP identifier
RemotePort uint16
Protocol uint8
Fragment bool
@@ -46,6 +49,8 @@ func (fp Packet) MarshalJSON() ([]byte, error) {
proto = "tcp"
case ProtoICMP:
proto = "icmp"
case ProtoICMPv6:
proto = "icmpv6"
case ProtoUDP:
proto = "udp"
default:
+158 -6
View File
@@ -87,9 +87,10 @@ func TestFirewall_AddRule(t *testing.T) {
fw = NewFirewall(l, time.Second, time.Minute, time.Hour, c)
require.NoError(t, fw.AddRule(true, firewall.ProtoICMP, 1, 1, []string{}, "h1", "", "", "", ""))
assert.Nil(t, fw.InRules.ICMP[1].Any.Any)
assert.Empty(t, fw.InRules.ICMP[1].Any.Groups)
assert.Contains(t, fw.InRules.ICMP[1].Any.Hosts, "h1")
//no matter what port is given for icmp, it should end up as "any"
assert.Nil(t, fw.InRules.ICMP[firewall.PortAny].Any.Any)
assert.Empty(t, fw.InRules.ICMP[firewall.PortAny].Any.Groups)
assert.Contains(t, fw.InRules.ICMP[firewall.PortAny].Any.Hosts, "h1")
fw = NewFirewall(l, time.Second, time.Minute, time.Hour, c)
require.NoError(t, fw.AddRule(false, firewall.ProtoAny, 1, 1, []string{}, "", ti.String(), "", "", ""))
@@ -734,6 +735,150 @@ func TestFirewall_DropConntrackReload(t *testing.T) {
assert.Equal(t, fw.Drop(p, false, &h, cp, nil), ErrNoMatchingRule)
}
func TestFirewall_ICMPPortBehavior(t *testing.T) {
l := test.NewLogger()
ob := &bytes.Buffer{}
l.SetOutput(ob)
myVpnNetworksTable := new(bart.Lite)
myVpnNetworksTable.Insert(netip.MustParsePrefix("1.1.1.1/8"))
network := netip.MustParsePrefix("1.2.3.4/24")
c := cert.CachedCertificate{
Certificate: &dummyCert{
name: "host1",
networks: []netip.Prefix{network},
groups: []string{"default-group"},
issuer: "signer-shasum",
},
InvertedGroups: map[string]struct{}{"default-group": {}},
}
h := HostInfo{
ConnectionState: &ConnectionState{
peerCert: &c,
},
vpnAddrs: []netip.Addr{network.Addr()},
}
h.buildNetworks(myVpnNetworksTable, c.Certificate)
cp := cert.NewCAPool()
templ := firewall.Packet{
LocalAddr: netip.MustParseAddr("1.2.3.4"),
RemoteAddr: netip.MustParseAddr("1.2.3.4"),
Protocol: firewall.ProtoICMP,
Fragment: false,
}
t.Run("ICMP allowed", func(t *testing.T) {
fw := NewFirewall(l, time.Second, time.Minute, time.Hour, c.Certificate)
require.NoError(t, fw.AddRule(true, firewall.ProtoICMP, 0, 0, []string{"any"}, "", "", "", "", ""))
t.Run("zero ports", func(t *testing.T) {
p := templ.Copy()
p.LocalPort = 0
p.RemotePort = 0
// Drop outbound
assert.Equal(t, fw.Drop(*p, false, &h, cp, nil), ErrNoMatchingRule)
// Allow inbound
resetConntrack(fw)
require.NoError(t, fw.Drop(*p, true, &h, cp, nil))
//now also allow outbound
require.NoError(t, fw.Drop(*p, false, &h, cp, nil))
})
t.Run("nonzero ports", func(t *testing.T) {
p := templ.Copy()
p.LocalPort = 0xabcd
p.RemotePort = 0x1234
// Drop outbound
assert.Equal(t, fw.Drop(*p, false, &h, cp, nil), ErrNoMatchingRule)
// Allow inbound
resetConntrack(fw)
require.NoError(t, fw.Drop(*p, true, &h, cp, nil))
//now also allow outbound
require.NoError(t, fw.Drop(*p, false, &h, cp, nil))
})
})
t.Run("Any proto, some ports allowed", func(t *testing.T) {
fw := NewFirewall(l, time.Second, time.Minute, time.Hour, c.Certificate)
require.NoError(t, fw.AddRule(true, firewall.ProtoAny, 80, 444, []string{"any"}, "", "", "", "", ""))
t.Run("zero ports, still blocked", func(t *testing.T) {
p := templ.Copy()
p.LocalPort = 0
p.RemotePort = 0
// Drop outbound
assert.Equal(t, fw.Drop(*p, false, &h, cp, nil), ErrNoMatchingRule)
// Allow inbound
resetConntrack(fw)
assert.Equal(t, fw.Drop(*p, true, &h, cp, nil), ErrNoMatchingRule)
//now also allow outbound
assert.Equal(t, fw.Drop(*p, false, &h, cp, nil), ErrNoMatchingRule)
})
t.Run("nonzero ports, still blocked", func(t *testing.T) {
p := templ.Copy()
p.LocalPort = 0xabcd
p.RemotePort = 0x1234
// Drop outbound
assert.Equal(t, fw.Drop(*p, false, &h, cp, nil), ErrNoMatchingRule)
// Allow inbound
resetConntrack(fw)
assert.Equal(t, fw.Drop(*p, true, &h, cp, nil), ErrNoMatchingRule)
//now also allow outbound
assert.Equal(t, fw.Drop(*p, false, &h, cp, nil), ErrNoMatchingRule)
})
t.Run("nonzero, matching ports, still blocked", func(t *testing.T) {
p := templ.Copy()
p.LocalPort = 80
p.RemotePort = 80
// Drop outbound
assert.Equal(t, fw.Drop(*p, false, &h, cp, nil), ErrNoMatchingRule)
// Allow inbound
resetConntrack(fw)
assert.Equal(t, fw.Drop(*p, true, &h, cp, nil), ErrNoMatchingRule)
//now also allow outbound
assert.Equal(t, fw.Drop(*p, false, &h, cp, nil), ErrNoMatchingRule)
})
})
t.Run("Any proto, any port", func(t *testing.T) {
fw := NewFirewall(l, time.Second, time.Minute, time.Hour, c.Certificate)
require.NoError(t, fw.AddRule(true, firewall.ProtoAny, 0, 0, []string{"any"}, "", "", "", "", ""))
t.Run("zero ports, allowed", func(t *testing.T) {
resetConntrack(fw)
p := templ.Copy()
p.LocalPort = 0
p.RemotePort = 0
// Drop outbound
assert.Equal(t, fw.Drop(*p, false, &h, cp, nil), ErrNoMatchingRule)
// Allow inbound
resetConntrack(fw)
require.NoError(t, fw.Drop(*p, true, &h, cp, nil))
//now also allow outbound
require.NoError(t, fw.Drop(*p, false, &h, cp, nil))
})
t.Run("nonzero ports, allowed", func(t *testing.T) {
resetConntrack(fw)
p := templ.Copy()
p.LocalPort = 0xabcd
p.RemotePort = 0x1234
// Drop outbound
assert.Equal(t, fw.Drop(*p, false, &h, cp, nil), ErrNoMatchingRule)
// Allow inbound
resetConntrack(fw)
require.NoError(t, fw.Drop(*p, true, &h, cp, nil))
//now also allow outbound
require.NoError(t, fw.Drop(*p, false, &h, cp, nil))
//different ID is blocked
p.RemotePort++
require.Equal(t, fw.Drop(*p, false, &h, cp, nil), ErrNoMatchingRule)
})
})
}
func TestFirewall_DropIPSpoofing(t *testing.T) {
l := test.NewLogger()
ob := &bytes.Buffer{}
@@ -919,11 +1064,11 @@ func TestNewFirewallFromConfig(t *testing.T) {
// Test code/port error
conf = config.NewC(l)
conf.Settings["firewall"] = map[string]any{"outbound": []any{map[string]any{"code": "a", "host": "testh"}}}
conf.Settings["firewall"] = map[string]any{"outbound": []any{map[string]any{"code": "a", "host": "testh", "proto": "any"}}}
_, err = NewFirewallFromConfig(l, cs, conf)
require.EqualError(t, err, "firewall.outbound rule #0; code was not a number; `a`")
conf.Settings["firewall"] = map[string]any{"outbound": []any{map[string]any{"port": "a", "host": "testh"}}}
conf.Settings["firewall"] = map[string]any{"outbound": []any{map[string]any{"port": "a", "host": "testh", "proto": "any"}}}
_, err = NewFirewallFromConfig(l, cs, conf)
require.EqualError(t, err, "firewall.outbound rule #0; port was not a number; `a`")
@@ -973,7 +1118,14 @@ func TestAddFirewallRulesFromConfig(t *testing.T) {
mf = &mockFirewall{}
conf.Settings["firewall"] = map[string]any{"outbound": []any{map[string]any{"port": "1", "proto": "icmp", "host": "a"}}}
require.NoError(t, AddFirewallRulesFromConfig(l, false, conf, mf))
assert.Equal(t, addRuleCall{incoming: false, proto: firewall.ProtoICMP, startPort: 1, endPort: 1, groups: nil, host: "a", ip: "", localIp: ""}, mf.lastCall)
assert.Equal(t, addRuleCall{incoming: false, proto: firewall.ProtoICMP, startPort: firewall.PortAny, endPort: firewall.PortAny, groups: nil, host: "a", ip: "", localIp: ""}, mf.lastCall)
// Test adding icmp rule no port
conf = config.NewC(l)
mf = &mockFirewall{}
conf.Settings["firewall"] = map[string]any{"outbound": []any{map[string]any{"proto": "icmp", "host": "a"}}}
require.NoError(t, AddFirewallRulesFromConfig(l, false, conf, mf))
assert.Equal(t, addRuleCall{incoming: false, proto: firewall.ProtoICMP, startPort: firewall.PortAny, endPort: firewall.PortAny, groups: nil, host: "a", ip: "", localIp: ""}, mf.lastCall)
// Test adding any rule
conf = config.NewC(l)
+1
View File
@@ -4,6 +4,7 @@ go 1.25
require (
dario.cat/mergo v1.0.2
filippo.io/bigmod v0.1.0
github.com/anmitsu/go-shlex v0.0.0-20200514113438-38f4b401e2be
github.com/armon/go-radix v1.0.0
github.com/cyberdelia/go-metrics-graphite v0.0.0-20161219230853-39f87cc3b432
+2
View File
@@ -1,6 +1,8 @@
cloud.google.com/go v0.34.0/go.mod h1:aQUYkXzVsufM+DwF1aE+0xfcU+56JwCaLick0ClmMTw=
dario.cat/mergo v1.0.2 h1:85+piFYR1tMbRrLcDwR18y4UKJ3aH1Tbzi24VRW1TK8=
dario.cat/mergo v1.0.2/go.mod h1:E/hbnu0NxMFBjpMIE34DRGLWqDy0g5FuKDhCb31ngxA=
filippo.io/bigmod v0.1.0 h1:UNzDk7y9ADKST+axd9skUpBQeW7fG2KrTZyOE4uGQy8=
filippo.io/bigmod v0.1.0/go.mod h1:OjOXDNlClLblvXdwgFFOQFJEocLhhtai8vGLy0JCZlI=
github.com/alecthomas/template v0.0.0-20160405071501-a0175ee3bccc/go.mod h1:LOuyumcjzFXgccqObfd/Ljyb9UuFJ6TxHnclSeseNhc=
github.com/alecthomas/template v0.0.0-20190718012654-fb15b899a751/go.mod h1:LOuyumcjzFXgccqObfd/Ljyb9UuFJ6TxHnclSeseNhc=
github.com/alecthomas/units v0.0.0-20151022065526-2efee857e7cf/go.mod h1:ybxpYRFXyAe+OPACYpWeL0wqObRcbAqCMya13uyzqw0=
+58 -9
View File
@@ -23,22 +23,25 @@ const (
DefaultHandshakeRetries = 10
DefaultHandshakeTriggerBuffer = 64
DefaultUseRelays = true
DefaultMaxHandshakeRate = 0 // 0 means unlimited
)
var (
defaultHandshakeConfig = HandshakeConfig{
tryInterval: DefaultHandshakeTryInterval,
retries: DefaultHandshakeRetries,
triggerBuffer: DefaultHandshakeTriggerBuffer,
useRelays: DefaultUseRelays,
tryInterval: DefaultHandshakeTryInterval,
retries: DefaultHandshakeRetries,
triggerBuffer: DefaultHandshakeTriggerBuffer,
useRelays: DefaultUseRelays,
maxHandshakeRate: DefaultMaxHandshakeRate,
}
)
type HandshakeConfig struct {
tryInterval time.Duration
retries int64
triggerBuffer int
useRelays bool
tryInterval time.Duration
retries int64
triggerBuffer int
useRelays bool
maxHandshakeRate int
messageMetrics *MessageMetrics
}
@@ -58,9 +61,15 @@ type HandshakeManager struct {
messageMetrics *MessageMetrics
metricInitiated metrics.Counter
metricTimedOut metrics.Counter
metricRateLimited metrics.Counter
f *Interface
l *logrus.Logger
// Rate limiting for new handshakes (token bucket)
rateBucket int // tokens currently available
rateMax int // max tokens (== max handshakes per second), 0 means unlimited
rateLastTick time.Time
// can be used to trigger outbound handshake for the given vpnIp
trigger chan netip.Addr
}
@@ -116,10 +125,41 @@ func NewHandshakeManager(l *logrus.Logger, mainHostMap *HostMap, lightHouse *Lig
messageMetrics: config.messageMetrics,
metricInitiated: metrics.GetOrRegisterCounter("handshake_manager.initiated", nil),
metricTimedOut: metrics.GetOrRegisterCounter("handshake_manager.timed_out", nil),
metricRateLimited: metrics.GetOrRegisterCounter("handshake_manager.rate_limited", nil),
rateBucket: config.maxHandshakeRate,
rateMax: config.maxHandshakeRate,
rateLastTick: time.Now(),
l: l,
}
}
// handshakeRateAllow checks the token bucket rate limiter and returns true if a
// new handshake is allowed. Must be called with hm.Lock held.
func (hm *HandshakeManager) handshakeRateAllow(now time.Time) bool {
if hm.rateMax == 0 {
return true
}
// Refill tokens based on elapsed time
elapsed := now.Sub(hm.rateLastTick)
if elapsed >= time.Second {
// Add tokens for full seconds elapsed
tokens := int(elapsed/time.Second) * hm.rateMax
hm.rateBucket += tokens
if hm.rateBucket > hm.rateMax {
hm.rateBucket = hm.rateMax
}
hm.rateLastTick = now
}
if hm.rateBucket > 0 {
hm.rateBucket--
return true
}
return false
}
func (hm *HandshakeManager) Run(ctx context.Context) {
clockSource := time.NewTicker(hm.config.tryInterval)
defer clockSource.Stop()
@@ -149,6 +189,15 @@ func (hm *HandshakeManager) HandleIncoming(via ViaSender, packet []byte, h *head
case header.HandshakeIXPSK0:
switch h.MessageCounter {
case 1:
// Check rate limit for new incoming handshakes
hm.Lock()
allowed := hm.handshakeRateAllow(time.Now())
hm.Unlock()
if !allowed {
hm.metricRateLimited.Inc(1)
hm.l.WithField("from", via).Debug("Handshake rate limit reached, dropping incoming handshake")
return
}
ixHandshakeStage1(hm.f, via, packet, h)
case 2:
@@ -590,7 +639,7 @@ func (hm *HandshakeManager) allocateIndex(hh *HandshakeHostInfo) error {
hm.Lock()
defer hm.Unlock()
for i := 0; i < 32; i++ {
for range 32 {
index, err := generateIndex(hm.l)
if err != nil {
return err
+62
View File
@@ -65,6 +65,68 @@ func Test_NewHandshakeManagerVpnIp(t *testing.T) {
assert.NotContains(t, blah.vpnIps, ip)
}
func Test_HandshakeManagerRateLimit(t *testing.T) {
l := test.NewLogger()
localrange := netip.MustParsePrefix("10.1.1.1/24")
preferredRanges := []netip.Prefix{localrange}
mainHM := newHostMap(l)
mainHM.preferredRanges.Store(&preferredRanges)
lh := newTestLighthouse()
config := defaultHandshakeConfig
config.maxHandshakeRate = 2
hm := NewHandshakeManager(l, mainHM, lh, &udp.NoopConn{}, config)
hm.f = &Interface{handshakeManager: hm, pki: &PKI{}, l: l}
now := time.Now()
// Should allow up to maxHandshakeRate handshakes
hm.Lock()
assert.True(t, hm.handshakeRateAllow(now), "first handshake should be allowed")
assert.True(t, hm.handshakeRateAllow(now), "second handshake should be allowed")
assert.False(t, hm.handshakeRateAllow(now), "third handshake should be rate limited")
hm.Unlock()
// After advancing time by 1 second, tokens should refill
hm.Lock()
assert.True(t, hm.handshakeRateAllow(now.Add(time.Second)), "handshake should be allowed after token refill")
hm.Unlock()
}
func Test_HandshakeManagerRateLimitUnlimited(t *testing.T) {
l := test.NewLogger()
localrange := netip.MustParsePrefix("10.1.1.1/24")
preferredRanges := []netip.Prefix{localrange}
mainHM := newHostMap(l)
mainHM.preferredRanges.Store(&preferredRanges)
lh := newTestLighthouse()
cs := &CertState{
initiatingVersion: cert.Version1,
privateKey: []byte{},
v1Cert: &dummyCert{version: cert.Version1},
v1HandshakeBytes: []byte{},
}
// Default config has maxHandshakeRate=0 (unlimited)
hm := NewHandshakeManager(l, mainHM, lh, &udp.NoopConn{}, defaultHandshakeConfig)
hm.f = &Interface{handshakeManager: hm, pki: &PKI{}, l: l}
hm.f.pki.cs.Store(cs)
// Should allow many handshakes with no limit
// Limited to 10 due to test lighthouse query channel buffer
for i := 0; i < 10; i++ {
ip := netip.MustParseAddr("172.1.1.1").As16()
ip[15] = byte(i + 1)
addr := netip.AddrFrom16(ip)
h := hm.StartHandshake(addr, nil)
assert.NotNil(t, h, "handshake %d should be allowed with unlimited rate", i)
}
}
func testCountTimerWheelEntries(tw *LockingTimerWheel[netip.Addr]) (c int) {
for _, i := range tw.t.wheel {
n := i.Head
-1
View File
@@ -1,5 +1,4 @@
//go:build e2e_testing
// +build e2e_testing
package nebula
-1
View File
@@ -1,5 +1,4 @@
//go:build darwin || dragonfly || freebsd || netbsd || openbsd
// +build darwin dragonfly freebsd netbsd openbsd
package nebula
-1
View File
@@ -1,5 +1,4 @@
//go:build !darwin && !dragonfly && !freebsd && !netbsd && !openbsd
// +build !darwin,!dragonfly,!freebsd,!netbsd,!openbsd
package nebula
+17 -33
View File
@@ -6,8 +6,8 @@ import (
"fmt"
"io"
"net/netip"
"os"
"runtime"
"sync"
"sync/atomic"
"time"
@@ -88,7 +88,6 @@ type Interface struct {
writers []udp.Conn
readers []io.ReadWriteCloser
wg sync.WaitGroup
metricHandshakes metrics.Histogram
messageMetrics *MessageMetrics
@@ -211,7 +210,7 @@ func NewInterface(ctx context.Context, c *InterfaceConfig) (*Interface, error) {
// activate creates the interface on the host. After the interface is created, any
// other services that want to bind listeners to its IP may do so successfully. However,
// the interface isn't going to process anything until run() is called.
func (f *Interface) activate() error {
func (f *Interface) activate() {
// actually turn on tun dev
addr, err := f.outside.LocalAddr()
@@ -239,38 +238,33 @@ func (f *Interface) activate() error {
if i > 0 {
reader, err = f.inside.NewMultiQueueReader()
if err != nil {
return err
f.l.Fatal(err)
}
}
f.readers[i] = reader
}
if err = f.inside.Activate(); err != nil {
if err := f.inside.Activate(); err != nil {
f.inside.Close()
return err
f.l.Fatal(err)
}
return nil
}
func (f *Interface) run() (func(), error) {
func (f *Interface) run() {
// Launch n queues to read packets from udp
for i := 0; i < f.routines; i++ {
f.wg.Add(1)
go f.listenOut(i)
}
// Launch n queues to read packets from tun dev
for i := 0; i < f.routines; i++ {
f.wg.Add(1)
go f.listenIn(f.readers[i], i)
}
return f.wg.Wait, nil
}
func (f *Interface) listenOut(i int) {
runtime.LockOSThread()
var li udp.Conn
if i > 0 {
li = f.writers[i]
@@ -285,21 +279,14 @@ func (f *Interface) listenOut(i int) {
fwPacket := &firewall.Packet{}
nb := make([]byte, 12, 12)
err := li.ListenOut(func(fromUdpAddr netip.AddrPort, payload []byte) {
li.ListenOut(func(fromUdpAddr netip.AddrPort, payload []byte) {
f.readOutsidePackets(ViaSender{UdpAddr: fromUdpAddr}, plaintext[:0], payload, h, fwPacket, lhh, nb, i, ctCache.Get(f.l))
})
if err != nil && !f.closed.Load() {
f.l.WithError(err).Error("Error while reading packet inbound packet, closing")
//TODO: Trigger Control to close
}
f.l.Debugf("underlay reader %v is done", i)
f.wg.Done()
}
func (f *Interface) listenIn(reader io.ReadWriteCloser, i int) {
runtime.LockOSThread()
packet := make([]byte, mtu)
out := make([]byte, mtu)
fwPacket := &firewall.Packet{}
@@ -310,18 +297,17 @@ func (f *Interface) listenIn(reader io.ReadWriteCloser, i int) {
for {
n, err := reader.Read(packet)
if err != nil {
if !f.closed.Load() {
f.l.WithError(err).Error("Error while reading outbound packet, closing")
//TODO: Trigger Control to close
if errors.Is(err, os.ErrClosed) && f.closed.Load() {
return
}
break
f.l.WithError(err).Error("Error while reading outbound packet")
// This only seems to happen when something fatal happens to the fd, so exit.
os.Exit(2)
}
f.consumeInsidePacket(packet[:n], fwPacket, nb, out, i, conntrackCache.Get(f.l))
}
f.l.Debugf("overlay reader %v is done", i)
f.wg.Done()
}
func (f *Interface) RegisterConfigChangeCallbacks(c *config.C) {
@@ -498,23 +484,21 @@ func (f *Interface) GetCertState() *CertState {
func (f *Interface) Close() error {
f.closed.Store(true)
// Release the udp readers
for _, u := range f.writers {
err := u.Close()
if err != nil {
f.l.WithError(err).Error("Error while closing udp socket")
}
}
// Release the tun readers
for i, r := range f.readers {
if i == 0 {
continue // f.readers[0] is f.inside, which we want to save for last, since it closes other stuff too
continue // f.readers[0] is f.inside, which we want to save for last
}
if err := r.Close(); err != nil {
f.l.WithError(err).Error("Error while closing tun reader")
}
}
// Release the tun device
return f.inside.Close()
}
+3 -10
View File
@@ -713,21 +713,14 @@ func (lh *LightHouse) unlockedShouldAddV6(vpnAddr netip.Addr, to *V6AddrPort) bo
func (lh *LightHouse) IsLighthouseAddr(vpnAddr netip.Addr) bool {
l := lh.GetLighthouses()
for i := range l {
if l[i] == vpnAddr {
return true
}
}
return false
return slices.Contains(l, vpnAddr)
}
func (lh *LightHouse) IsAnyLighthouseAddr(vpnAddrs []netip.Addr) bool {
l := lh.GetLighthouses()
for i := range vpnAddrs {
for j := range l {
if l[j] == vpnAddrs[i] {
return true
}
if slices.Contains(l, vpnAddrs[i]) {
return true
}
}
return false
+15 -18
View File
@@ -105,11 +105,7 @@ func Main(c *config.C, configTest bool, buildVersion string, logger *logrus.Logg
// deprecated and undocumented
tunQueues := c.GetInt("tun.routines", 1)
udpQueues := c.GetInt("listen.routines", 1)
if tunQueues > udpQueues {
routines = tunQueues
} else {
routines = udpQueues
}
routines = max(tunQueues, udpQueues)
if routines != 1 {
l.WithField("routines", routines).Warn("Setting tun.routines and listen.routines is deprecated. Use `routines` instead")
}
@@ -208,10 +204,11 @@ func Main(c *config.C, configTest bool, buildVersion string, logger *logrus.Logg
useRelays := c.GetBool("relay.use_relays", DefaultUseRelays) && !c.GetBool("relay.am_relay", false)
handshakeConfig := HandshakeConfig{
tryInterval: c.GetDuration("handshakes.try_interval", DefaultHandshakeTryInterval),
retries: int64(c.GetInt("handshakes.retries", DefaultHandshakeRetries)),
triggerBuffer: c.GetInt("handshakes.trigger_buffer", DefaultHandshakeTriggerBuffer),
useRelays: useRelays,
tryInterval: c.GetDuration("handshakes.try_interval", DefaultHandshakeTryInterval),
retries: int64(c.GetInt("handshakes.retries", DefaultHandshakeRetries)),
triggerBuffer: c.GetInt("handshakes.trigger_buffer", DefaultHandshakeTriggerBuffer),
useRelays: useRelays,
maxHandshakeRate: c.GetInt("handshakes.max_rate", DefaultMaxHandshakeRate),
messageMetrics: messageMetrics,
}
@@ -292,15 +289,15 @@ func Main(c *config.C, configTest bool, buildVersion string, logger *logrus.Logg
}
return &Control{
f: ifce,
l: l,
ctx: ctx,
cancel: cancel,
sshStart: sshStart,
statsStart: statsStart,
dnsStart: dnsStart,
lighthouseStart: lightHouse.StartUpdateWorker,
connectionManagerStart: connManager.Start,
ifce,
l,
ctx,
cancel,
sshStart,
statsStart,
dnsStart,
lightHouse.StartUpdateWorker,
connManager.Start,
}, nil
}
-1
View File
@@ -1,5 +1,4 @@
//go:build !boringcrypto
// +build !boringcrypto
package nebula
+46 -19
View File
@@ -190,6 +190,13 @@ func (f *Interface) readOutsidePackets(via ViaSender, out []byte, packet []byte,
if !f.handleEncrypted(ci, via, h) {
return
}
_, err = f.decrypt(hostinfo, h.MessageCounter, out, packet, h, nb)
if err != nil {
hostinfo.logger(f.l).WithError(err).WithField("from", via).
WithField("packet", packet).
Error("Failed to decrypt CloseTunnel packet")
return
}
hostinfo.logger(f.l).WithField("from", via).
Info("Close tunnel received, tearing down.")
@@ -327,13 +334,29 @@ func parseV6(data []byte, incoming bool, fp *firewall.Packet) error {
proto := layers.IPProtocol(data[protoAt])
switch proto {
case layers.IPProtocolICMPv6, layers.IPProtocolESP, layers.IPProtocolNoNextHeader:
case layers.IPProtocolESP, layers.IPProtocolNoNextHeader:
fp.Protocol = uint8(proto)
fp.RemotePort = 0
fp.LocalPort = 0
fp.Fragment = false
return nil
case layers.IPProtocolICMPv6:
if dataLen < offset+6 {
return ErrIPv6PacketTooShort
}
fp.Protocol = uint8(proto)
fp.LocalPort = 0 //incoming vs outgoing doesn't matter for icmpv6
icmptype := data[offset+1]
switch icmptype {
case layers.ICMPv6TypeEchoRequest, layers.ICMPv6TypeEchoReply:
fp.RemotePort = binary.BigEndian.Uint16(data[offset+4 : offset+6]) //identifier
default:
fp.RemotePort = 0
}
fp.Fragment = false
return nil
case layers.IPProtocolTCP, layers.IPProtocolUDP:
if dataLen < offset+4 {
return ErrIPv6PacketTooShort
@@ -423,34 +446,38 @@ func parseV4(data []byte, incoming bool, fp *firewall.Packet) error {
// Accounting for a variable header length, do we have enough data for our src/dst tuples?
minLen := ihl
if !fp.Fragment && fp.Protocol != firewall.ProtoICMP {
minLen += minFwPacketLen
if !fp.Fragment {
if fp.Protocol == firewall.ProtoICMP {
minLen += minFwPacketLen + 2
} else {
minLen += minFwPacketLen
}
}
if len(data) < minLen {
return ErrIPv4InvalidHeaderLength
}
// Firewall packets are locally oriented
if incoming {
if incoming { // Firewall packets are locally oriented
fp.RemoteAddr, _ = netip.AddrFromSlice(data[12:16])
fp.LocalAddr, _ = netip.AddrFromSlice(data[16:20])
if fp.Fragment || fp.Protocol == firewall.ProtoICMP {
fp.RemotePort = 0
fp.LocalPort = 0
} else {
fp.RemotePort = binary.BigEndian.Uint16(data[ihl : ihl+2])
fp.LocalPort = binary.BigEndian.Uint16(data[ihl+2 : ihl+4])
}
} else {
fp.LocalAddr, _ = netip.AddrFromSlice(data[12:16])
fp.RemoteAddr, _ = netip.AddrFromSlice(data[16:20])
if fp.Fragment || fp.Protocol == firewall.ProtoICMP {
fp.RemotePort = 0
fp.LocalPort = 0
} else {
fp.LocalPort = binary.BigEndian.Uint16(data[ihl : ihl+2])
fp.RemotePort = binary.BigEndian.Uint16(data[ihl+2 : ihl+4])
}
}
if fp.Fragment {
fp.RemotePort = 0
fp.LocalPort = 0
} else if fp.Protocol == firewall.ProtoICMP { //note that orientation doesn't matter on ICMP
fp.RemotePort = binary.BigEndian.Uint16(data[ihl+4 : ihl+6]) //identifier
fp.LocalPort = 0 //code would be uint16(data[ihl+1])
} else if incoming {
fp.RemotePort = binary.BigEndian.Uint16(data[ihl : ihl+2]) //src port
fp.LocalPort = binary.BigEndian.Uint16(data[ihl+2 : ihl+4]) //dst port
} else {
fp.LocalPort = binary.BigEndian.Uint16(data[ihl : ihl+2]) //src port
fp.RemotePort = binary.BigEndian.Uint16(data[ihl+2 : ihl+4]) //dst port
}
return nil
+17 -10
View File
@@ -155,6 +155,7 @@ func Test_newPacket_v6(t *testing.T) {
// next layer, missing length byte
err = newPacket(buffer.Bytes()[:49], true, p)
require.ErrorIs(t, err, ErrIPv6CouldNotFindPayload)
err = nil
// A good ICMP packet
ip = layers.IPv6{
@@ -165,20 +166,26 @@ func Test_newPacket_v6(t *testing.T) {
DstIP: net.IPv6linklocalallnodes,
}
icmp := layers.ICMPv6{}
buffer.Clear()
err = gopacket.SerializeLayers(buffer, opt, &ip, &icmp)
if err != nil {
panic(err)
icmp := layers.ICMPv6{
TypeCode: layers.ICMPv6TypeEchoRequest,
Checksum: 0x1234,
}
err = newPacket(buffer.Bytes(), true, p)
require.NoError(t, err)
buffer.Clear()
require.NoError(t, gopacket.SerializeLayers(buffer, opt, &ip, &icmp))
require.Error(t, newPacket(buffer.Bytes(), true, p))
buffer.Clear()
echo := layers.ICMPv6Echo{
Identifier: 0xabcd,
SeqNumber: 1234,
}
require.NoError(t, gopacket.SerializeLayers(buffer, opt, &ip, &icmp, &echo))
require.NoError(t, newPacket(buffer.Bytes(), true, p))
assert.Equal(t, uint8(layers.IPProtocolICMPv6), p.Protocol)
assert.Equal(t, netip.MustParseAddr("ff02::2"), p.RemoteAddr)
assert.Equal(t, netip.MustParseAddr("ff02::1"), p.LocalAddr)
assert.Equal(t, uint16(0), p.RemotePort)
assert.Equal(t, uint16(0xabcd), p.RemotePort)
assert.Equal(t, uint16(0), p.LocalPort)
assert.False(t, p.Fragment)
@@ -574,7 +581,7 @@ func BenchmarkParseV6(b *testing.B) {
}
evilBytes := buffer.Bytes()
for i := 0; i < 200; i++ {
for range 200 {
evilBytes = append(evilBytes, hopHeader...)
}
evilBytes = append(evilBytes, lastHopHeader...)
+26 -29
View File
@@ -72,11 +72,6 @@ type ifreqQLEN struct {
}
func newTunFromFd(c *config.C, l *logrus.Logger, deviceFd int, vpnNetworks []netip.Prefix) (*tun, error) {
err := unix.SetNonblock(deviceFd, true)
if err != nil {
return nil, err
}
file := os.NewFile(uintptr(deviceFd), "/dev/net/tun")
t, err := newTunGeneric(c, l, file, vpnNetworks)
@@ -127,11 +122,6 @@ func newTun(c *config.C, l *logrus.Logger, vpnNetworks []netip.Prefix, multiqueu
}
name := strings.Trim(string(req.Name[:]), "\x00")
err = unix.SetNonblock(fd, true)
if err != nil {
return nil, err
}
file := os.NewFile(uintptr(fd), "/dev/net/tun")
t, err := newTunGeneric(c, l, file, vpnNetworks)
if err != nil {
@@ -155,12 +145,7 @@ func newTunGeneric(c *config.C, l *logrus.Logger, file *os.File, vpnNetworks []n
l: l,
}
err := unix.SetNonblock(t.fd, true)
if err != nil {
return nil, err
}
err = t.reload(c, true)
err := t.reload(c, true)
if err != nil {
return nil, err
}
@@ -266,11 +251,6 @@ func (t *tun) NewMultiQueueReader() (io.ReadWriteCloser, error) {
return nil, err
}
err = unix.SetNonblock(fd, true)
if err != nil {
return nil, err
}
file := os.NewFile(uintptr(fd), "/dev/net/tun")
return file, nil
@@ -281,6 +261,29 @@ func (t *tun) RoutesFor(ip netip.Addr) routing.Gateways {
return r
}
func (t *tun) Write(b []byte) (int, error) {
var nn int
maximum := len(b)
for {
n, err := unix.Write(t.fd, b[nn:maximum])
if n > 0 {
nn += n
}
if nn == len(b) {
return nn, err
}
if err != nil {
return nn, err
}
if n == 0 {
return nn, io.ErrUnexpectedEOF
}
}
}
func (t *tun) deviceBytes() (o [16]byte) {
for i, c := range t.Device {
o[i] = byte(c)
@@ -709,17 +712,11 @@ func (t *tun) Close() error {
}
if t.ReadWriteCloser != nil {
err := t.ReadWriteCloser.Close()
if err != nil {
t.l.WithField("error", err).Error("Failed to close read/write connection")
}
_ = t.ReadWriteCloser.Close()
}
if t.ioctlFd > 0 {
err := os.NewFile(t.ioctlFd, "ioctlFd").Close()
if err != nil {
t.l.WithField("error", err).Error("Failed to close ioctl fd")
}
_ = os.NewFile(t.ioctlFd, "ioctlFd").Close()
t.ioctlFd = 0
}
+1 -1
View File
@@ -55,7 +55,7 @@ func (rm *relayManager) setAmRelay(v bool) {
func AddRelay(l *logrus.Logger, relayHostInfo *HostInfo, hm *HostMap, vpnIp netip.Addr, remoteIdx *uint32, relayType int, state int) (uint32, error) {
hm.Lock()
defer hm.Unlock()
for i := 0; i < 32; i++ {
for range 32 {
index, err := generateIndex(l)
if err != nil {
return 0, err
+1 -6
View File
@@ -404,12 +404,7 @@ func (r *RemoteList) Rebuild(preferredRanges []netip.Prefix) {
// unlockedIsBad assumes you have the write lock and checks if the remote matches any entry in the blocked address list
func (r *RemoteList) unlockedIsBad(remote netip.AddrPort) bool {
for _, v := range r.badRemotes {
if v == remote {
return true
}
}
return false
return slices.Contains(r.badRemotes, remote)
}
// unlockedSetLearnedV4 assumes you have the write lock and sets the current learned address for this owner and marks the
+1 -10
View File
@@ -44,10 +44,7 @@ type Service struct {
}
func New(control *nebula.Control) (*Service, error) {
wait, err := control.Start()
if err != nil {
return nil, err
}
control.Start()
ctx := control.Context()
eg, ctx := errgroup.WithContext(ctx)
@@ -144,12 +141,6 @@ func New(control *nebula.Control) (*Service, error) {
}
})
// Add the nebula wait function to the group
eg.Go(func() error {
wait()
return nil
})
return &s, nil
}
+5 -3
View File
@@ -6,6 +6,7 @@ import (
"errors"
"flag"
"fmt"
"maps"
"net"
"net/netip"
"os"
@@ -631,6 +632,9 @@ func sshCreateTunnel(ifce *Interface, fs any, a []string, w sshd.StringWriter) e
}
hostInfo = ifce.handshakeManager.StartHandshake(vpnAddr, nil)
if hostInfo == nil {
return w.WriteLine("Handshake rate limit reached")
}
if addr.IsValid() {
hostInfo.SetRemote(addr)
}
@@ -831,9 +835,7 @@ func sshPrintRelays(ifce *Interface, fs any, a []string, w sshd.StringWriter) er
relays := map[uint32]*HostInfo{}
ifce.hostMap.Lock()
for k, v := range ifce.hostMap.Relays {
relays[k] = v
}
maps.Copy(relays, ifce.hostMap.Relays)
ifce.hostMap.Unlock()
type RelayFor struct {
+2 -2
View File
@@ -134,7 +134,7 @@ func TestTimerWheel_Purge(t *testing.T) {
assert.True(t, tw.lastTick.After(lastTick))
// Make sure we get all 4 packets back
for i := 0; i < 4; i++ {
for i := range 4 {
p, has := tw.Purge()
assert.True(t, has)
assert.Equal(t, fps[i], p)
@@ -149,7 +149,7 @@ func TestTimerWheel_Purge(t *testing.T) {
// Make sure we cached the free'd items
assert.Equal(t, 4, tw.itemsCached)
ci := tw.itemCache
for i := 0; i < 4; i++ {
for range 4 {
assert.NotNil(t, ci)
ci = ci.Next
}
+3 -3
View File
@@ -16,7 +16,7 @@ type EncReader func(
type Conn interface {
Rebind() error
LocalAddr() (netip.AddrPort, error)
ListenOut(r EncReader) error
ListenOut(r EncReader)
WriteTo(b []byte, addr netip.AddrPort) error
ReloadConfig(c *config.C)
SupportsMultipleReaders() bool
@@ -31,8 +31,8 @@ func (NoopConn) Rebind() error {
func (NoopConn) LocalAddr() (netip.AddrPort, error) {
return netip.AddrPort{}, nil
}
func (NoopConn) ListenOut(_ EncReader) error {
return nil
func (NoopConn) ListenOut(_ EncReader) {
return
}
func (NoopConn) SupportsMultipleReaders() bool {
return false
+3 -2
View File
@@ -165,7 +165,7 @@ func NewUDPStatsEmitter(udpConns []Conn) func() {
return func() {}
}
func (u *StdConn) ListenOut(r EncReader) error {
func (u *StdConn) ListenOut(r EncReader) {
buffer := make([]byte, MTU)
for {
@@ -173,7 +173,8 @@ func (u *StdConn) ListenOut(r EncReader) error {
n, rua, err := u.ReadFromUDPAddrPort(buffer)
if err != nil {
if errors.Is(err, net.ErrClosed) {
return err
u.l.WithError(err).Debug("udp socket is closed, exiting read loop")
return
}
u.l.WithError(err).Error("unexpected udp socket receive error")
+15 -2
View File
@@ -10,9 +10,11 @@ package udp
import (
"context"
"errors"
"fmt"
"net"
"net/netip"
"time"
"github.com/sirupsen/logrus"
"github.com/slackhq/nebula/config"
@@ -71,14 +73,25 @@ type rawMessage struct {
Len uint32
}
func (u *GenericConn) ListenOut(r EncReader) error {
func (u *GenericConn) ListenOut(r EncReader) {
buffer := make([]byte, MTU)
var lastRecvErr time.Time
for {
// Just read one packet at a time
n, rua, err := u.ReadFromUDPAddrPort(buffer)
if err != nil {
return err
if errors.Is(err, net.ErrClosed) {
u.l.WithError(err).Debug("udp socket is closed, exiting read loop")
return
}
// Dampen unexpected message warns to once per minute
if lastRecvErr.IsZero() || time.Since(lastRecvErr) > time.Minute {
lastRecvErr = time.Now()
u.l.WithError(err).Warn("unexpected udp socket receive error")
}
continue
}
r(netip.AddrPortFrom(rua.Addr().Unmap(), rua.Port()), buffer[:n])
+13 -21
View File
@@ -9,7 +9,6 @@ import (
"net"
"net/netip"
"syscall"
"time"
"unsafe"
"github.com/rcrowley/go-metrics"
@@ -18,8 +17,6 @@ import (
"golang.org/x/sys/unix"
)
var readTimeout = unix.NsecToTimeval(int64(3 * time.Second))
type StdConn struct {
sysFd int
isV4 bool
@@ -27,6 +24,14 @@ type StdConn struct {
batch int
}
func maybeIPV4(ip net.IP) (net.IP, bool) {
ip4 := ip.To4()
if ip4 != nil {
return ip4, true
}
return ip, false
}
func NewListener(l *logrus.Logger, ip netip.Addr, port int, multi bool, batch int) (Conn, error) {
af := unix.AF_INET6
if ip.Is4() {
@@ -50,11 +55,6 @@ func NewListener(l *logrus.Logger, ip netip.Addr, port int, multi bool, batch in
}
}
// Set a read timeout
if err = unix.SetsockoptTimeval(fd, unix.SOL_SOCKET, unix.SO_RCVTIMEO, &readTimeout); err != nil {
return nil, fmt.Errorf("unable to set SO_RCVTIMEO: %s", err)
}
var sa unix.Sockaddr
if ip.Is4() {
sa4 := &unix.SockaddrInet4{Port: port}
@@ -122,7 +122,7 @@ func (u *StdConn) LocalAddr() (netip.AddrPort, error) {
}
}
func (u *StdConn) ListenOut(r EncReader) error {
func (u *StdConn) ListenOut(r EncReader) {
var ip netip.Addr
msgs, buffers, names := u.PrepareRawMessages(u.batch)
@@ -134,7 +134,8 @@ func (u *StdConn) ListenOut(r EncReader) error {
for {
n, err := read(msgs)
if err != nil {
return err
u.l.WithError(err).Debug("udp socket is closed, exiting read loop")
return
}
for i := 0; i < n; i++ {
@@ -162,9 +163,6 @@ func (u *StdConn) ReadSingle(msgs []rawMessage) (int, error) {
)
if err != 0 {
if err == unix.EAGAIN || err == unix.EINTR || err == unix.EWOULDBLOCK {
continue
}
return 0, &net.OpError{Op: "recvmsg", Err: err}
}
@@ -184,14 +182,8 @@ func (u *StdConn) ReadMulti(msgs []rawMessage) (int, error) {
0,
0,
)
if err == unix.EAGAIN || err == unix.EINTR || err == unix.EWOULDBLOCK {
if int64(n) > 0 {
//ran out of time, but have some messages to return
return int(n), nil
} else {
continue
}
} else if err != 0 {
if err != 0 {
return 0, &net.OpError{Op: "recvmmsg", Err: err}
}
+3 -2
View File
@@ -140,7 +140,7 @@ func (u *RIOConn) bind(l *logrus.Logger, sa windows.Sockaddr) error {
return nil
}
func (u *RIOConn) ListenOut(r EncReader) error {
func (u *RIOConn) ListenOut(r EncReader) {
buffer := make([]byte, MTU)
var lastRecvErr time.Time
@@ -151,7 +151,8 @@ func (u *RIOConn) ListenOut(r EncReader) error {
if err != nil {
if errors.Is(err, net.ErrClosed) {
return err
u.l.WithError(err).Debug("udp socket is closed, exiting read loop")
return
}
// Dampen unexpected message warns to once per minute
if lastRecvErr.IsZero() || time.Since(lastRecvErr) > time.Minute {
+2 -3
View File
@@ -6,7 +6,6 @@ package udp
import (
"io"
"net/netip"
"os"
"sync/atomic"
"github.com/sirupsen/logrus"
@@ -107,11 +106,11 @@ func (u *TesterConn) WriteTo(b []byte, addr netip.AddrPort) error {
return nil
}
func (u *TesterConn) ListenOut(r EncReader) error {
func (u *TesterConn) ListenOut(r EncReader) {
for {
p, ok := <-u.RxPackets
if !ok {
return os.ErrClosed
return
}
r(p.From, p.Data)
}