Compare commits

..
Author SHA1 Message Date
Ryan Huber a784af4026 tun: Keep relayed data on the reader transmit path
The sticky gate only drains socket submissions, so moving relay data between reader and staged sender CPUs can reorder packets on independent NIC queues. Keep relayed batches on the reader with separate, shared counter reservations while preserving the direct gate and sender affinity.

Cover gate switches, oversized relay credit, mixed direct placement and stalled shared-tunnel reservations. Add Forgejo build, test, race, crypto, lint and artifact jobs on incus-docker.
2026-10-18 14:59:21 +00:00
Ryan Huber 5cbbba254e tun: Drop the staged timing metrics 2026-10-16 21:25:23 +00:00
Ryan Huber 51591b0cec tun: Hold one transmit mode per routine
With staged transmit, an idle reader encrypted and sent a small read
itself, while larger reads went to the workers and left from the
ordered sender. Each read chose on its own, so under load a routine
alternated between the two paths. Their packets left from different
CPUs, and the receiver's TCP saw them out of order: on 100 GbE, summed
over four hosts, dsack_dups rose from 0-1 on master to about 25k and
reord_seen from 0 to 13k-19k.

Each routine now holds one mode, inline on the reader or fanout to the
workers and the sender. It switches only after tun.staged.gate_hold
(default 64) reads in a row want the other mode, and before going
inline it waits until every batch in flight is on the wire, so a
switch never lets a later packet overtake an earlier one. Going to
fanout nothing is in flight. flow.tx.gate_switches counts the switches.
On the same hosts dsack_dups fell to 20-52 and reord_seen to 0-2,
while throughput matched or beat per-read mixing (many-to-one 34.9
instead of 30.7 Gbit/s).

The affinity test waited only for the previous batch's packets to be
captured before the next read, but the sender returns the slot after
its write, so the reader could still see it in flight and stage the
small read. Switching to inline now drains, which makes the inline
send deterministic there.
2026-10-16 21:24:57 +00:00
Ryan Huber d16a52f921 tun: Add tun.staged.tx and tun.staged.inline_below
tx: false keeps transmit inline and stages only receive. inline_below
sets the idle-reader shortcut threshold, 0 hands every batch to the
workers and the ordered sender or writer.
2026-10-16 21:24:28 +00:00
Ryan Huber 82488caa32 tun: Benchmark the staged transmit pipeline
Run reads of eight 45-segment superpackets through listenIn into a
discarding socket, inline and with four workers, for both ciphers.
2026-10-16 21:24:04 +00:00
Ryan Huber eccaf1ca23 tun: Read the clock once per staged loop iteration
The TX reader timed its slot wait with a second pair of clock reads only to
subtract it again. It now waits for a free slot before it starts the busy
clock, so a read costs one time.Now and one time.Since. The RX listener
likewise ends its busy time when it has to wait for a batch instead of
timing the wait, and pool workers time a run of queued jobs with one pair
of reads. A test checks the read stages still leave backpressure out.
2026-10-16 21:23:34 +00:00
Ryan Huber 130ef730b4 tun: Size staged slots from the workers and listen.batch
The TX and RX slot counts were fixed at eight and six. TX now uses one slot
per worker plus the one being read and the one being sent, at least eight.
RX keeps up to 384 recvmmsg entries in flight in four to six slots, so a
larger listen.batch takes fewer slots and RX memory never exceeds today's.
tun.staged.tx_slots and rx_slots override either, down to two. The defaults
at listen.batch 64 with up to six workers are unchanged: eight TX slots of
about 1.1 MiB and six RX slots of 4 MiB with GRO.
2026-10-16 21:23:10 +00:00
Ryan Huber ffb2835f70 tio: Count superpacket segments on Packet
Move the staged transmit segment count onto tio.Packet, next to
IsSuperpacket and SegmentSuperpacket, which it predicts.
2026-10-16 21:22:49 +00:00
Ryan Huber eb073d6c23 tun: Keep small idle batches on the reader
With staging enabled, a reader whose pipeline is empty handles a batch below
256 TX segments or RX packets itself, without a worker handoff or buffer swap.
The threshold is the measured crossover, not another configuration knob.
Inline work only starts once that reader's ordered work has completed, so
ownership and order hold across switches.

With several readers, transmit still takes shared tunnel credit and the same
reservations as staged batches, releasing it after the synchronous flush; a
sole reader with an empty pipeline has nothing to overtake and uses the
original inline path. Small batches a reader sends itself run on the reader's
CPU, so they can use a different XPS TX ring than its sender.

Metrics: flow.tx.inline and flow.rx.inline count reads handled on the reader
(TX inline also counts oversized reads).

With receive IRQ CPUs kept free of Nebula threads, this improved one TCP
stream over 100 GbE from 16.7 to 21.1 Gbit/s; that measurement does not isolate
the threshold. Tests cover the switch in both directions, ordering behind an
in-flight batch, a paused reader against repeated small sends on another,
RecvError handling on the listener, and send affinity across mode switches.
2026-10-16 21:22:30 +00:00
Ryan Huber e4f659a207 tun: Share replay-window reservation credit across readers
Charge staged reservations to each tunnel instead of dividing a static share
of the window by routines. Several readers sending on one tunnel then share
its credit: the limit is half the peer replay window, assumed from
ReplayWindow, which must be a power of two of at least 8192 (checked at
compile time). The other half allows finite unreserved traffic (inline and
control sends, relay forwarding through SendVia) and network reordering;
unlimited bypass traffic or delay can still exceed it.

An outstanding-count cap alone would let a fast reader repeatedly send and
reacquire credit, overtaking a paused reader without bound. So once readers
overlap, spent credit is only recycled when every reservation has drained. A
sole ordered reader gets each completion refunded, since its later batches
cannot overtake its earlier ones. A reader that fails to acquire ends sole
ownership, so a busy owner cannot keep a larger waiter blocked forever. This
restores progress, not FIFO fairness. All transitions are a single CAS.

Waiting readers flush their own oldest batch before retrying and never hold a
partial acquisition: a failed multi-tunnel (relay) acquisition rolls back.
Credit is released only after the flush or an explicit drop. A read that alone
exceeds a tunnel's credit, such as a tiny-MSS superpacket, is sent segment by
segment, synchronously. Acquisition is per read, so pressure on one tunnel
also delays the other tunnels in the same read.

The combined staged transmit, receive and shared credit measured 15 to 25
Gbit/s over one tunnel with eight TCP streams between two 100 GbE hosts.

Tests model overtaking, ordered reuse, a blocked reader behind a busy owner,
and relay rollback with both window sizes, and run eight competing readers
plus unreserved control traffic on one tunnel, checking every packet is
accepted by the receiver's replay window in wire order.
2026-10-16 21:22:11 +00:00
Ryan Huber db8f9cd2e9 udp: Add ordered staged receive processing
With tun.staged.workers set, each Linux UDP listener classifies a recvmmsg
batch, hands its data packets to that many decrypt workers, and an ordered
writer commits the batch in arrival order: replay window, roaming, firewall,
control packets and tun writes go through the same helpers inline receive
uses. Six batches per routine bound memory and backpressure. Conns that cannot
hand off their buffers stay inline.

The listener's classification is speculative. Before touching replay state the
writer resolves each data packet through its own batch-local hostmap cache,
exactly where inline receive would, so data after a close in the same batch is
still delivered while data after a removal or replacement between batches is
dropped, with the same RecvError reply inline receive sends. Known replays are
marked by a precheck and skip decryption, but keep their place so that reply
stays identical when an earlier RecvError deleted their tunnel.

New API: udp.StdConn.ListenOutHandoff, and the same on TesterConn for e2e,
runs the receive loop while handing each batch's buffers to the caller in
exchange for replacements. It is found through an unexported interface in
nebula, so udp.Conn and its other implementations are unchanged.

Metrics: flow.rx.batches, and flow.stage.{rx_read,rx_decrypt,rx_write}.q<N>.busy_ns.

Tests cover both ciphers, ordering, duplicate and corrupted packets from other
addresses, window jumps, control packets mid-batch, RecvError then replay,
tunnel replacement, firewall parity, fallback, real UDP sockets, partial
batches at close, and a handshake and traffic through e2e that checks pipeline
use on Linux and the inline fallback elsewhere. No isolated receive throughput
claim is made.
2026-10-16 21:21:50 +00:00
Ryan Huber f3f98e1690 tun: Add opt-in staged transmit processing
Set tun.staged.workers to a positive count on Linux, with tun.use_offloads
enabled, to move encryption off each tun reader. The reader filters and
reserves counters for a whole read, hands the batch to that many encrypt
workers, and an ordered sender flushes the batches in read order. Eight slots
per routine bound the batches in flight; a full pipeline blocks the reader.
Zero workers, the default, keeps today's inline path, as do tun queues that
cannot hand off their read buffer and builds whose AES-GCM needs nonce-ordered
encryption (BoringCrypto, FIPS).

IMPORTANT: staged senders need peers with the 8192-entry replay window of
master. Released v1.11.x peers use 1024 and will drop reordered batches. The
window is not negotiated.

Readers keep today's pinning. The sender is only pinned with an explicit
tun.cpu_affinity: sender i uses entry i+1, unless that is its reader's CPU,
so a one-entry list leaves the sender unpinned rather than sharing it: two
busy transmit threads on one CPU serialise (eight TCP streams over 100 GbE
fell from 25.9 to 22.8 Gbit/s). Without a list the sender is not pinned. Placing it by queue index on a
hybrid CPU put it on an efficiency core, and one TCP stream over 100 GbE
reached 18.6-19.6 Gbit/s pinned against 20.2-20.6 unpinned.

New API, each needed across a package boundary:
- tio.Offload.SwapRxBuf hands the buffer of the last Read to the reader and
  reads into the one given. It is a method on the concrete queue, found through
  an unexported interface in nebula, so tio.Queue and its other
  implementations are unchanged.
- batch.SendBatch.Reset drops queued packets without sending, for a sender
  whose sockets are already closed; Flush now uses it.

Metrics, registered only for active pipelines: flow.tx.batches counts reads
handed to the sender, flow.stage.{tx_read,tx_encrypt,tx_send}.q<N>.busy_ns the
elapsed busy time of each stage, to find the limiting one.

Tests cover ordering and counters under backpressure with both ciphers (AES
skipped where nonce order is required), read errors with batches in flight,
shutdown, exhaustion, relays, fallback, firewall parity, and the actual reader
and send thread affinity for every placement, with pinning on and off: the
sender is pinned only to an explicit entry other than its reader's CPU.
2026-10-16 21:21:36 +00:00
Ryan Huber 6146f3e4a6 tun: Prepare batch counter reservation for staged encryption
Build on the inside-packet filtering split with shared preparation and encryption helpers for inline and reserved sends. Reserve each batch’s per-tunnel counter range before encryption, including relay counters, without enabling staged processing yet. Test reserved encryption against a real receiver and check segmentation counts.
2026-10-16 21:21:23 +00:00
Ryan Huber 6826c04103 tun: Separate inside-packet filtering from sending 2026-10-16 21:21:03 +00:00
John Maguire 5bf666dd90 Treat uppercase blocked fingerprints the same as lowercase (#1964)
- Error for invalid on startup 
- Still block the valid blocklist entries when a reload has a bad one
2026-10-16 16:28:37 -04:00
John Maguire 49207da077 Remove the ssh debug profiling commands (#1965)
We plan to move this functionality into the debug socket.
2026-10-16 15:47:56 -04:00
Jack Doan bbc49669b7 fix noisy log line (#1961) 2026-10-16 12:08:55 -05:00
Nate Brown 915495d5f4 Fail the reload on a startup only value that would fail a restart, and stop asking for tun.dev restarts that change nothing (#1953)
smoke-extra / freebsd-amd64 (push) Failing after 25s
smoke-extra / linux-amd64-ipv6disable (push) Failing after 13s
smoke-extra / netbsd-amd64 (push) Failing after 11s
smoke-extra / openbsd-amd64 (push) Failing after 12s
smoke-extra / linux-386 (push) Failing after 14s
smoke / Run multi node smoke test (push) Failing after 1m43s
Build and test / Static checks (push) Successful in 2m25s
Build and test / Test linux (push) Failing after 1m28s
Build and test / Test linux-pkcs11 (push) Failing after 2m5s
Build and test / Test linux-boringcrypto (push) Failing after 2m56s
Build and test / Test linux-fips140 (push) Failing after 3m3s
Build and test / Cross-build linux-arm (push) Successful in 3m14s
Build and test / Cross-build linux-mips (push) Successful in 3m48s
Build and test / Cross-build linux-other (push) Successful in 3m13s
Build and test / Cross-build windows (push) Successful in 1m3s
Build and test / Cross-build freebsd (push) Successful in 1m34s
Build and test / Cross-build netbsd (push) Successful in 1m36s
Build and test / Cross-build openbsd (push) Successful in 1m37s
Build and test / Cross-build mobile (push) Successful in 3m33s
smoke / Run self traffic smoke test on macOS (push) Canceled after 0s
Build and test / Test macos (push) Canceled after 0s
Build and test / Test windows (push) Canceled after 0s
Build and test / CI status (push) Canceled after 0s
smoke-extra / Run windows smoke test (push) Canceled after 0s
2026-10-15 23:34:09 -05:00
Nate Brown a203d044bb Fail the reload when a config entry is skipped with a warning (#1952) 2026-10-15 23:22:47 -05:00
Nate Brown 316bf87780 Don't restart sshd when only sshd.sandbox_dir changes (#1948) 2026-10-15 22:12:12 -05:00
Nate Brown 1a0ac25db0 Report how a config reload went: failures, restarts required, and the keys that need one (#1935) 2026-10-15 15:36:39 -05:00
John Maguire 42597dda7d service: Don't hold listener lock while handing off a connection (#1939) 2026-10-15 15:14:39 -04:00
John Maguire afbdc87ed9 Update gvisor and bump to go1.27 (#1940)
gvisor's arm64 race-build compare-and-swap (pkg/sync/race_arm64.s)
loaded the new value into the register meant for the old one (R1
instead of R2), so it never succeeded. Sleepers could not commit to
parking and spun: under -race on arm64 every idle service netstack
busied about 14 cores, and TestService's static host lookup of
localhost missed its 250ms timeout and stalled for the 30s static_map
cadence. Fixed in gvisor 1b2946c4fa.

Go 1.27.2 is now the minimum because gvisor's go branch requires it.
golangci-lint is bumped to v2.14, the first release that can read
go1.27.2 export data.
2026-10-14 21:30:59 -04:00
95 changed files with 5300 additions and 1033 deletions

No files matched your search

+3 -3
View File
@@ -14,7 +14,7 @@ jobs:
- uses: actions/setup-go@v7
with:
go-version: '1.26'
go-version: '1.27'
check-latest: true
- name: Build
@@ -40,7 +40,7 @@ jobs:
- uses: actions/setup-go@v7
with:
go-version: '1.26'
go-version: '1.27'
check-latest: true
- name: Build
@@ -83,7 +83,7 @@ jobs:
- uses: actions/setup-go@v7
with:
go-version: '1.26'
go-version: '1.27'
check-latest: true
# GitHub holds ARNs, not credentials, and ARNs outlive a rotation
+3 -3
View File
@@ -34,7 +34,7 @@ jobs:
- uses: actions/setup-go@v7
with:
go-version: '1.26'
go-version: '1.27'
check-latest: true
- name: add hashicorp source
@@ -66,7 +66,7 @@ jobs:
- uses: actions/setup-go@v7
with:
go-version: '1.26'
go-version: '1.27'
check-latest: true
- name: add hashicorp source
@@ -92,7 +92,7 @@ jobs:
- uses: actions/setup-go@v7
with:
go-version: '1.26'
go-version: '1.27'
check-latest: true
# WSL2 + Ubuntu so the smoke can run a real linux peer with its own
+2 -2
View File
@@ -22,7 +22,7 @@ jobs:
- uses: actions/setup-go@v7
with:
go-version: '1.26'
go-version: '1.27'
check-latest: true
- name: Smoke Docker
@@ -51,7 +51,7 @@ jobs:
- uses: actions/setup-go@v7
with:
go-version: '1.26'
go-version: '1.27'
check-latest: true
- name: build
+4 -4
View File
@@ -22,7 +22,7 @@ jobs:
- uses: actions/setup-go@v7
with:
go-version: '1.26'
go-version: '1.27'
check-latest: true
- name: Install goimports
@@ -42,7 +42,7 @@ jobs:
- name: golangci-lint
uses: golangci/golangci-lint-action@v9
with:
version: v2.12
version: v2.14
test:
name: Test ${{ matrix.name }}
@@ -87,7 +87,7 @@ jobs:
- uses: actions/setup-go@v7
with:
go-version: '1.26'
go-version: '1.27'
check-latest: true
- name: Build
@@ -132,7 +132,7 @@ jobs:
- uses: actions/setup-go@v7
with:
go-version: '1.26'
go-version: '1.27'
check-latest: true
- name: Build ${{ matrix.name }}
+5
View File
@@ -7,6 +7,11 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
## [Unreleased]
### Removed
- The SSH debug server's `start-cpu-profile`, `stop-cpu-profile`, `save-heap-profile`, `save-mutex-profile`, and
`mutex-profile-fraction` commands, and `sshd.sandbox_dir`, which is now ignored if set.
### Fixed
- `create-tunnel -address <ip:port>` panicked on a nil RemoteList and, over the ssh debug server, took nebula
+2 -1
View File
@@ -85,9 +85,10 @@ func main() {
fmt.Printf("failed to apply logging config: %s", err)
os.Exit(1)
}
c.RegisterReloadCallback(func(c *config.C) {
c.RegisterReloadCallback(func(c *config.C, r *config.Reload) {
if err := logging.ApplyConfig(l, c); err != nil {
l.Error("Failed to reconfigure logger on reload", "error", err)
r.Failed()
}
})
+2 -1
View File
@@ -34,9 +34,10 @@ func (p *program) Start(s service.Service) error {
if err := logging.ApplyConfig(l, c); err != nil {
return fmt.Errorf("failed to apply logging config: %s", err)
}
c.RegisterReloadCallback(func(c *config.C) {
c.RegisterReloadCallback(func(c *config.C, r *config.Reload) {
if err := logging.ApplyConfig(l, c); err != nil {
l.Error("Failed to reconfigure logger on reload", "error", err)
r.Failed()
}
})
+2 -1
View File
@@ -71,9 +71,10 @@ func main() {
fmt.Printf("failed to apply logging config: %s", err)
os.Exit(1)
}
c.RegisterReloadCallback(func(c *config.C) {
c.RegisterReloadCallback(func(c *config.C, r *config.Reload) {
if err := logging.ApplyConfig(l, c); err != nil {
l.Error("Failed to reconfigure logger on reload", "error", err)
r.Failed()
}
})
+31 -22
View File
@@ -26,9 +26,12 @@ type C struct {
files []string
Settings map[string]any
oldSettings map[string]any
callbacks []func(*C)
callbacks []func(*C, *Reload)
l *slog.Logger
reloadLock sync.Mutex
// Set by the first reload that needs a restart and never cleared. Guarded by reloadLock
needsRestart bool
}
func NewC(l *slog.Logger) *C {
@@ -72,8 +75,9 @@ func (c *C) LoadString(raw string) error {
// RegisterReloadCallback stores a function to be called when a config reload is triggered. The functions registered
// here should decide if they need to make a change to the current process before making the change. HasChanged can be
// used to help decide if a change is necessary.
// These functions should return quickly or spawn their own go routine if they will take a while
func (c *C) RegisterReloadCallback(f func(*C)) {
// These functions should return quickly or spawn their own go routine if they will take a while.
// Use r to report anything that failed or needs a restart to apply.
func (c *C) RegisterReloadCallback(f func(c *C, r *Reload)) {
c.callbacks = append(c.callbacks, f)
}
@@ -144,50 +148,55 @@ func (c *C) CatchHUP(ctx context.Context) {
return
case <-ch:
c.l.Info("Caught HUP, reloading config")
c.ReloadConfig()
c.ReloadConfig().Log(c.l)
}
}
}()
}
func (c *C) ReloadConfig() {
// ReloadConfig reloads the config from the path provided to Load and runs every registered callback. A config that
// fails to load is logged here, like any other failure, and the result carries the error for the summary.
func (c *C) ReloadConfig() ReloadResult {
c.reloadLock.Lock()
defer c.reloadLock.Unlock()
c.oldSettings = make(map[string]any)
maps.Copy(c.oldSettings, c.Settings)
err := c.Load(c.path)
if err != nil {
c.l.Error("Error occurred while reloading config",
"config_path", c.path,
"error", err,
)
return
if err := c.Load(c.path); err != nil {
c.l.Error("Error occurred while reloading config", "config_path", c.path, "error", err)
return ReloadResult{Err: err, RestartRequired: c.needsRestart}
}
for _, v := range c.callbacks {
v(c)
}
return c.runCallbacks()
}
func (c *C) ReloadConfigString(raw string) error {
// ReloadConfigString is ReloadConfig for a config held in memory rather than on disk.
func (c *C) ReloadConfigString(raw string) ReloadResult {
c.reloadLock.Lock()
defer c.reloadLock.Unlock()
c.oldSettings = make(map[string]any)
maps.Copy(c.oldSettings, c.Settings)
err := c.LoadString(raw)
if err != nil {
return err
if err := c.LoadString(raw); err != nil {
c.l.Error("Error occurred while reloading config", "error", err)
return ReloadResult{Err: err, RestartRequired: c.needsRestart}
}
return c.runCallbacks()
}
func (c *C) runCallbacks() ReloadResult {
r := &Reload{c: c}
for _, v := range c.callbacks {
v(c)
v(c, r)
}
return nil
if r.restart {
c.needsRestart = true
}
return ReloadResult{Failed: r.failed, RestartRequired: c.needsRestart, RestartKeys: r.keys}
}
// GetString will get the string for k or return the default d if not found or invalid
@@ -391,7 +400,7 @@ func (c *C) parse() error {
var nm map[string]any
err = yaml.Unmarshal(b, &nm)
if err != nil {
return err
return fmt.Errorf("%s: %w", path, err)
}
// We need to use WithAppendSlice so that firewall rules in separate
+2 -2
View File
@@ -19,7 +19,7 @@ func TestConfig_Load(t *testing.T) {
// invalid yaml
c := NewC(l)
os.WriteFile(filepath.Join(dir, "01.yaml"), []byte(" invalid yaml"), 0644)
require.EqualError(t, c.Load(dir), "yaml: unmarshal errors:\n line 1: cannot unmarshal !!str `invalid...` into map[string]interface {}")
require.EqualError(t, c.Load(dir), filepath.Join(dir, "01.yaml")+": yaml: unmarshal errors:\n line 1: cannot unmarshal !!str `invalid...` into map[string]interface {}")
// simple multi config merge
c = NewC(l)
@@ -129,7 +129,7 @@ func TestConfig_ReloadConfig(t *testing.T) {
os.WriteFile(filepath.Join(dir, "01.yaml"), []byte("outer:\n inner: ho"), 0644)
c.RegisterReloadCallback(func(c *C) {
c.RegisterReloadCallback(func(c *C, _ *Reload) {
done <- true
})
+98
View File
@@ -0,0 +1,98 @@
package config
import (
"context"
"fmt"
"log/slog"
"slices"
)
// ReloadResult describes how a reload went. Problems are logged where they happen, Log writes a one line summary.
type ReloadResult struct {
// Err is set when the new config could not be read or parsed, no callbacks ran
Err error
// Failed is true when a callback could not apply part of the new config
Failed bool
// RestartRequired is true once any reload has needed a restart, and stays true until the process restarts
RestartRequired bool
// RestartKeys are the keys this reload changed that only apply on a restart
RestartKeys []string
}
// Summary returns a one line summary of the reload and the level to log it at.
func (r ReloadResult) Summary() (slog.Level, string) {
switch {
case r.Err != nil && r.RestartRequired:
return slog.LevelError, "Config reload failed, the new config did not load and a restart is still required"
case r.Err != nil:
return slog.LevelError, "Config reload failed, the new config did not load"
case r.Failed && r.RestartRequired:
return slog.LevelError, "Config reload completed with errors and requires a restart to fully apply, review the logs"
case r.Failed:
return slog.LevelError, "Config reload completed with errors, review the logs"
case r.RestartRequired:
return slog.LevelWarn, "Config reload was completed but requires a restart to fully apply"
default:
return slog.LevelInfo, "Config reload complete"
}
}
// String is the summary with Err and RestartKeys included, for output other than the log.
func (r ReloadResult) String() string {
_, msg := r.Summary()
if r.Err != nil {
msg = fmt.Sprintf("%s: %v", msg, r.Err)
}
if len(r.RestartKeys) > 0 {
msg = fmt.Sprintf("%s, keys %v", msg, r.RestartKeys)
}
return msg
}
// Log writes Summary to l.
func (r ReloadResult) Log(l *slog.Logger) {
level, msg := r.Summary()
if len(r.RestartKeys) > 0 {
l.Log(context.Background(), level, msg, "keys", r.RestartKeys)
return
}
l.Log(context.Background(), level, msg)
}
// Reload is passed to each reload callback to report how applying the new config went.
type Reload struct {
c *C
failed bool
restart bool
// Changed keys that only apply on a restart, from every callback
keys []string
}
// Failed marks the reload as failed, the caller logs why. Safe to call on a nil Reload, which is what the initial load
// passes.
func (r *Reload) Failed() {
if r != nil {
r.failed = true
}
}
// RestartRequired marks the reload as needing a restart, the caller logs why. Safe to call on a nil Reload.
func (r *Reload) RestartRequired() {
if r != nil {
r.restart = true
}
}
// RestartRequiredIfChanged marks the reload as needing a restart if any of keys changed, and adds them to RestartKeys.
// Use it for keys that are only read at startup. Safe to call on a nil Reload.
func (r *Reload) RestartRequiredIfChanged(keys ...string) {
if r == nil {
return
}
for _, k := range keys {
if r.c.HasChanged(k) && !slices.Contains(r.keys, k) {
r.keys = append(r.keys, k)
r.restart = true
}
}
}
+108
View File
@@ -0,0 +1,108 @@
package config
import (
"errors"
"log/slog"
"testing"
"github.com/slackhq/nebula/test"
"github.com/stretchr/testify/assert"
"github.com/stretchr/testify/require"
)
func TestReloadConfigString(t *testing.T) {
c := NewC(test.NewLogger())
require.NoError(t, c.LoadString("a: 1"))
fail := false
ran := 0
c.RegisterReloadCallback(func(c *C, r *Reload) {
ran++
if fail {
r.Failed()
}
})
assert.Equal(t, ReloadResult{}, c.ReloadConfigString("a: 2"))
fail = true
assert.Equal(t, ReloadResult{Failed: true}, c.ReloadConfigString("a: 3"))
assert.Equal(t, 2, ran)
// A config that fails to load runs no callbacks and returns the error
res := c.ReloadConfigString("a: [")
require.Error(t, res.Err)
assert.False(t, res.Failed)
assert.Equal(t, 2, ran)
assert.Equal(t, 3, c.GetInt("a", 0))
}
func TestReloadRestartRequiredLatches(t *testing.T) {
c := NewC(test.NewLogger())
require.NoError(t, c.LoadString("a: 1\nb: 1"))
c.RegisterReloadCallback(func(c *C, r *Reload) { r.RestartRequiredIfChanged("a", "b") })
// Nothing that needs a restart changed
assert.Equal(t, ReloadResult{}, c.ReloadConfigString("a: 1\nb: 1\nc: 1"))
assert.Equal(t, ReloadResult{RestartRequired: true, RestartKeys: []string{"a"}}, c.ReloadConfigString("a: 2\nb: 1\nc: 1"))
// The restart sticks through a reload with no changes, reverting the key and a config that fails to load. Only the
// reload that changed the key lists it
assert.Equal(t, ReloadResult{RestartRequired: true}, c.ReloadConfigString("a: 2\nb: 1\nc: 1"))
assert.Equal(t, ReloadResult{RestartRequired: true, RestartKeys: []string{"a"}}, c.ReloadConfigString("a: 1\nb: 1\nc: 1"))
res := c.ReloadConfigString("a: [")
require.Error(t, res.Err)
assert.True(t, res.RestartRequired)
}
// A key reported by more than one callback is listed once
func TestReloadRestartKeysDeduped(t *testing.T) {
c := NewC(test.NewLogger())
require.NoError(t, c.LoadString("a: 1\nb: 1"))
c.RegisterReloadCallback(func(c *C, r *Reload) { r.RestartRequiredIfChanged("a") })
c.RegisterReloadCallback(func(c *C, r *Reload) { r.RestartRequiredIfChanged("a", "b") })
assert.Equal(t, []string{"a", "b"}, c.ReloadConfigString("a: 2\nb: 2").RestartKeys)
}
// A callback can require a restart without a key changing, a file the config points at may have
func TestReloadRestartRequiredWithoutAChange(t *testing.T) {
c := NewC(test.NewLogger())
require.NoError(t, c.LoadString("a: 1"))
c.RegisterReloadCallback(func(c *C, r *Reload) { r.RestartRequired() })
assert.Equal(t, ReloadResult{RestartRequired: true}, c.ReloadConfigString("a: 1"))
}
func TestReloadResultSummary(t *testing.T) {
cases := []struct {
res ReloadResult
level slog.Level
msg string
}{
{ReloadResult{}, slog.LevelInfo, "Config reload complete"},
{ReloadResult{RestartRequired: true}, slog.LevelWarn, "Config reload was completed but requires a restart to fully apply"},
{ReloadResult{Failed: true}, slog.LevelError, "Config reload completed with errors, review the logs"},
{ReloadResult{Failed: true, RestartRequired: true}, slog.LevelError, "Config reload completed with errors and requires a restart to fully apply, review the logs"},
{ReloadResult{Err: errors.New("bad yaml")}, slog.LevelError, "Config reload failed, the new config did not load"},
{ReloadResult{Err: errors.New("bad yaml"), RestartRequired: true}, slog.LevelError, "Config reload failed, the new config did not load and a restart is still required"},
}
for _, tc := range cases {
level, msg := tc.res.Summary()
assert.Equal(t, tc.level, level, tc.msg)
assert.Equal(t, tc.msg, msg)
}
res := ReloadResult{RestartRequired: true, RestartKeys: []string{"a", "b"}}
assert.Equal(t, "Config reload was completed but requires a restart to fully apply, keys [a b]", res.String())
// String includes the error
assert.Equal(t, "Config reload failed, the new config did not load: bad yaml", ReloadResult{Err: errors.New("bad yaml")}.String())
}
// The initial load passes a nil Reload
func TestReloadNilIsSafe(t *testing.T) {
var r *Reload
r.Failed()
r.RestartRequired()
r.RestartRequiredIfChanged("a")
}
+2 -1
View File
@@ -57,7 +57,8 @@ func newConnectionManagerFromConfig(l *slog.Logger, c *config.C, hm *HostMap, p
}
cm.reload(c, true)
c.RegisterReloadCallback(func(c *config.C) {
c.RegisterReloadCallback(func(c *config.C, r *config.Reload) {
r.RestartRequiredIfChanged("timers.connection_alive_interval", "timers.pending_deletion_interval")
cm.reload(c, false)
})
+10 -1
View File
@@ -14,6 +14,9 @@ import (
)
const (
// ReplayWindow is the build-time receive window and the assumed peer window
// for TX reservation credit. Use a power of two; peers must match or have a
// larger receive window. The bitmap costs ReplayWindow/8 bytes per tunnel.
ReplayWindow = 8192
// RehandshakeAfterMessages rolls keys inside the AES-GCM data-volume margin (~2^-36 advantage at 64KB frames).
@@ -41,6 +44,7 @@ type ConnectionState struct {
peerCert *cert.CachedCertificate
initiator bool
messageCounter atomic.Uint64
txBudget txBudget
window *Bits
decryptLock sync.Mutex
writeLock sync.Mutex
@@ -104,7 +108,7 @@ func (cs *ConnectionState) Decrypt(l *slog.Logger, messageCounter uint64, packet
return nil, ErrAlreadySeen
}
out, err := cs.dKey.DecryptDanger(packet[header.Len:header.Len], packet[:header.Len], packet[header.Len:], messageCounter, nb)
out, err := cs.decryptPacket(messageCounter, packet, nb)
if err != nil {
return nil, err
}
@@ -118,6 +122,11 @@ func (cs *ConnectionState) Decrypt(l *slog.Logger, messageCounter uint64, packet
return out, nil
}
// decryptPacket authenticates and decrypts packet in place, leaving the replay window to the caller.
func (cs *ConnectionState) decryptPacket(messageCounter uint64, packet, nb []byte) ([]byte, error) {
return cs.dKey.DecryptDanger(packet[header.Len:header.Len], packet[:header.Len], packet[header.Len:], messageCounter, nb)
}
func (cs *ConnectionState) VerifyRelay(l *slog.Logger, messageCounter uint64, packet []byte, nb []byte) error {
cs.decryptLock.Lock()
result := cs.window.Check(l, messageCounter)
+12 -3
View File
@@ -23,11 +23,20 @@ import (
// runTestHandshake runs a complete IX handshake between two freshly-built
// peers and returns the initiator and responder Results. Used to produce
// real cipher states for tests that need to exercise post-handshake glue.
func runTestHandshake(t *testing.T) (initR, respR *handshake.Result) {
func runTestHandshake(t testing.TB) (initR, respR *handshake.Result) {
t.Helper()
return runTestHandshakeWith(t, noise.CipherChaChaPoly)
}
// runTestHandshakeWith is runTestHandshake with the data plane cipher picked by the caller.
func runTestHandshakeWith(t testing.TB, cipher noise.CipherFunc) (initR, respR *handshake.Result) {
t.Helper()
// Valid around now rather than the cert_test default, which is fixed at process start and lapses a minute
// later, inside a long -count run
now := time.Now()
ca, _, caKey, _ := ct.NewTestCaCert(
cert.Version2, cert.Curve_CURVE25519, time.Time{}, time.Time{}, nil, nil, nil,
cert.Version2, cert.Curve_CURVE25519, now.Add(-time.Minute), now.Add(time.Hour), nil, nil, nil,
)
caPool := ct.NewTestCAPool(ca)
@@ -40,7 +49,7 @@ func runTestHandshake(t *testing.T) (initR, respR *handshake.Result) {
require.NoError(t, err)
hsBytes, err := c.MarshalForHandshakes()
require.NoError(t, err)
ncs := noise.NewCipherSuite(noise.DH25519, noise.CipherChaChaPoly, noise.HashSHA256)
ncs := noise.NewCipherSuite(noise.DH25519, cipher, noise.HashSHA256)
cred := handshake.NewCredential(c, hsBytes, priv, ncs)
return func(v cert.Version) *handshake.Credential {
if v == cert.Version2 {
+3 -3
View File
@@ -151,9 +151,9 @@ func (c *fakeConn) WriteTo(_ []byte, _ netip.AddrPort) error { return nil }
func (c *fakeConn) WriteBatch(bufs [][]byte, _ []netip.AddrPort) (int, error) {
return len(bufs), nil
}
func (c *fakeConn) ReloadConfig(_ *config.C) {}
func (c *fakeConn) SupportsMultipleReaders() bool { return true }
func (c *fakeConn) Close() error { c.closed = true; return nil }
func (c *fakeConn) ReloadConfig(_ *config.C, _ *config.Reload) {}
func (c *fakeConn) SupportsMultipleReaders() bool { return true }
func (c *fakeConn) Close() error { c.closed = true; return nil }
type multiqueueDevice struct {
*fakeDevice
-75
View File
@@ -1,75 +0,0 @@
//go:build linux && !android && !e2e_testing
package cpupick
import (
"errors"
"fmt"
"os"
"strconv"
"unsafe"
"golang.org/x/sys/unix"
)
// Avoid removes cpus from the affinity of every thread of the process, for use at startup. New threads inherit
// their parent's mask, so it repeats until a pass finds nothing left to change; a thread that exits meanwhile is
// skipped. Every mask is checked before any is changed. With apply false it only validates, for configuration tests.
// This affects the entire process, including other users of an embedded Nebula. Not wired up yet: tun.avoid_cpus
// only steers Default for now.
func Avoid(cpus []int, apply bool) error {
const capacity = int(unsafe.Sizeof(unix.CPUSet{})) * 8
for _, cpu := range cpus {
if cpu < 0 || cpu >= capacity {
return fmt.Errorf("CPU %d is out of range", cpu)
}
}
if len(cpus) == 0 {
return nil
}
for {
masks, err := avoidingMasks(cpus)
if err != nil || !apply || len(masks) == 0 {
return err
}
for tid, mask := range masks {
if err := unix.SchedSetaffinity(tid, &mask); err != nil && !errors.Is(err, unix.ESRCH) {
return fmt.Errorf("set thread %d affinity: %w", tid, err)
}
}
}
}
// avoidingMasks returns the mask without cpus of every thread whose mask has any of them.
func avoidingMasks(cpus []int) (map[int]unix.CPUSet, error) {
entries, err := os.ReadDir("/proc/self/task")
if err != nil {
return nil, err
}
masks := make(map[int]unix.CPUSet, len(entries))
for _, entry := range entries {
tid, err := strconv.Atoi(entry.Name())
if err != nil {
return nil, err
}
var mask unix.CPUSet
err = unix.SchedGetaffinity(tid, &mask)
if errors.Is(err, unix.ESRCH) {
continue
}
if err != nil {
return nil, fmt.Errorf("read thread %d affinity: %w", tid, err)
}
next := mask
for _, cpu := range cpus {
next.Clear(cpu)
}
if next.Count() == 0 {
return nil, fmt.Errorf("avoid_cpus leaves thread %d with no allowed CPU", tid)
}
if next != mask {
masks[tid] = next
}
}
return masks, nil
}
-98
View File
@@ -1,98 +0,0 @@
//go:build linux && !android && !e2e_testing
package cpupick
import (
"fmt"
"os"
"os/exec"
"runtime"
"strconv"
"sync"
"testing"
"unsafe"
"github.com/slackhq/nebula/util"
"github.com/stretchr/testify/require"
"golang.org/x/sys/unix"
)
// TestAvoid changes the affinity of the whole process, so it runs in a child, leaving the test runner untouched.
func TestAvoid(t *testing.T) {
if os.Getenv("NEBULA_CPUPICK_AVOID_TEST") != "1" {
exe, err := os.Executable()
require.NoError(t, err)
cmd := exec.Command(exe, "-test.run=^TestAvoid$", "-test.v")
cmd.Env = append(os.Environ(), "NEBULA_CPUPICK_AVOID_TEST=1")
out, err := cmd.CombinedOutput()
require.NoError(t, err, "%s", out)
return
}
allowed, err := util.AllowedCPUs()
require.NoError(t, err)
if len(allowed) < 2 {
t.Skip("requires at least two allowed CPUs")
}
cpu := allowed[0]
release := make(chan struct{})
var wg sync.WaitGroup
// lockThreads occupies 8 OS threads until release, so the runtime has to start more
lockThreads := func() {
var ready sync.WaitGroup
for range 8 {
ready.Add(1)
wg.Go(func() {
runtime.LockOSThread()
ready.Done()
<-release
})
}
ready.Wait()
}
lockThreads()
require.NoError(t, Avoid([]int{cpu}, false))
after, err := util.AllowedCPUs()
require.NoError(t, err)
require.Equal(t, allowed, after, "configuration check must not mutate affinity")
require.Error(t, Avoid(allowed, true), "must reject an empty mask before applying")
require.NoError(t, Avoid([]int{cpu, cpu}, true))
requireAvoided(t, cpu, allowed)
// Existing threads stay locked while new ones inherit the restriction
lockThreads()
requireAvoided(t, cpu, allowed)
close(release)
wg.Wait()
}
// requireAvoided checks no thread may run on cpu, and every thread still may on some CPU of allowed only.
func requireAvoided(t *testing.T, cpu int, allowed []int) {
t.Helper()
entries, err := os.ReadDir("/proc/self/task")
require.NoError(t, err)
for _, entry := range entries {
tid, err := strconv.Atoi(entry.Name())
require.NoError(t, err)
var mask unix.CPUSet
err = unix.SchedGetaffinity(tid, &mask)
if err == unix.ESRCH {
continue
}
require.NoError(t, err)
require.False(t, mask.IsSet(cpu), "thread %d", tid)
require.Positive(t, mask.Count())
for id := range len(mask) * 64 {
if mask.IsSet(id) {
require.Contains(t, allowed, id, "must not widen the inherited mask")
}
}
}
}
// TestAvoidRange checks the bounds of unix.CPUSet, whose words are 32 bits wide on 32-bit platforms.
func TestAvoidRange(t *testing.T) {
capacity := int(unsafe.Sizeof(unix.CPUSet{})) * 8
require.NoError(t, Avoid([]int{capacity - 1}, false))
require.EqualError(t, Avoid([]int{capacity}, false), fmt.Sprintf("CPU %d is out of range", capacity))
require.EqualError(t, Avoid([]int{-1}, false), "CPU -1 is out of range")
}
-8
View File
@@ -1,8 +0,0 @@
//go:build !linux || android || e2e_testing
package cpupick
import "errors"
// Avoid is unsupported outside Linux: there is no thread affinity API to restrict.
func Avoid(_ []int, _ bool) error { return errors.ErrUnsupported }
+6 -17
View File
@@ -16,15 +16,10 @@
// across distinct physical cores when the topology permits, CPU 0's physical
// core demoted to last resort, and the order rotated by a stable per-instance
// key so co-located instances spread instead of stacking.
//
// CPUs the operator asked to keep readers off (tun.avoid_cpus, typically the
// underlay NIC's receive IRQ CPUs) are removed from the allowed set before
// any of that, so no rule can bring one back.
package cpupick
import (
"log/slog"
"slices"
"github.com/slackhq/nebula/util"
)
@@ -62,17 +57,12 @@ func flatTopology(cpus []int) topology {
// Default computes the pin order for `routines` tun readers. key is any
// stable per-instance value; the bound UDP port is ideal — distinct across
// co-located instances, stable across restarts so benchmark runs stay
// comparable. avoid lists CPUs never to return, matched literally. Returns
// nil when there is nothing useful to say (no affinity support on this
// platform, lookup failure, avoid covering every allowed CPU); callers keep
// their existing fallback spread.
func Default(routines int, key uint64, avoid []int, l *slog.Logger) []int {
// comparable. Returns nil when there is nothing useful to say (no affinity
// support on this platform, lookup failure); callers keep their existing
// fallback spread.
func Default(routines int, key uint64, l *slog.Logger) []int {
allowed, err := util.AllowedCPUs()
if err != nil {
return nil
}
allowed = slices.DeleteFunc(allowed, func(c int) bool { return slices.Contains(avoid, c) })
if len(allowed) == 0 {
if err != nil || len(allowed) == 0 {
return nil
}
perf, signal := perfCPUs(allowed)
@@ -87,8 +77,7 @@ func Default(routines int, key uint64, avoid []int, l *slog.Logger) []int {
if l != nil {
l.Info("chose default pin CPUs for tun readers",
"cpus", cpus[:min(routines, len(cpus))],
"perfSignal", signal,
"avoided", avoid)
"perfSignal", signal)
}
return cpus
}
-35
View File
@@ -1,35 +0,0 @@
//go:build linux && !android && !e2e_testing
package cpupick
import (
"slices"
"testing"
"github.com/slackhq/nebula/util"
"github.com/stretchr/testify/assert"
"github.com/stretchr/testify/require"
)
func TestDefaultSkipsAvoided(t *testing.T) {
allowed, err := util.AllowedCPUs()
require.NoError(t, err)
if len(allowed) < 2 {
t.Skip("requires at least two allowed CPUs")
}
avoid := allowed[:len(allowed)/2]
for key := range uint64(16) {
got := Default(len(allowed), key, avoid, nil)
require.NotEmpty(t, got)
for _, cpu := range got {
assert.NotContains(t, avoid, cpu, "key %d", key)
assert.Contains(t, allowed, cpu, "key %d", key)
}
}
assert.Nil(t, Default(2, 0, allowed, nil), "avoiding everything leaves nothing to suggest")
// Without avoid every allowed CPU stays in play
got := Default(len(allowed), 0, nil, nil)
slices.Sort(got)
assert.Equal(t, allowed, got)
}
+2 -1
View File
@@ -69,9 +69,10 @@ func newDnsServerFromConfig(ctx context.Context, l *slog.Logger, pki *PKI, hostM
ds.mux = dns.NewServeMux()
ds.mux.HandleFunc(".", ds.handleDnsRequest)
c.RegisterReloadCallback(func(c *config.C) {
c.RegisterReloadCallback(func(c *config.C, r *config.Reload) {
if err := ds.reload(c, false); err != nil {
ds.l.Error("Failed to reload DNS responder from config", "error", err)
r.Failed()
}
})
+1 -1
View File
@@ -1513,7 +1513,7 @@ func TestLighthouseUpdateOnReload(t *testing.T) {
// Reload the config. The lighthouse.hosts change triggers TriggerUpdate,
// which wakes the update worker. It calls SendUpdate, initiating a
// handshake to the new lighthouse and caching the HostUpdateNotification.
require.NoError(t, myConfig.ReloadConfigString(string(newCfg)))
require.NoError(t, myConfig.ReloadConfigString(string(newCfg)).Err)
// Route until the lighthouse receives the HostUpdateNotification.
// This covers: handshake stage 1, stage 2, then the cached update.
+31 -2
View File
@@ -5,9 +5,11 @@ package e2e
import (
"fmt"
"net/netip"
"runtime"
"testing"
"time"
"github.com/rcrowley/go-metrics"
"github.com/slackhq/nebula/cert"
"github.com/slackhq/nebula/cert_test"
"github.com/slackhq/nebula/e2e/router"
@@ -129,7 +131,7 @@ func TestCertUpgrade(t *testing.T) {
}
r.Logf("reload new v2-only config")
err = myC.ReloadConfigString(string(cb))
err = myC.ReloadConfigString(string(cb)).Err
assert.NoError(t, err)
r.Log("yay, spin until their sees it")
waitStart := time.Now()
@@ -222,7 +224,7 @@ func TestCertDowngrade(t *testing.T) {
}
r.Logf("reload new v1-only config")
err = myC.ReloadConfigString(string(cb))
err = myC.ReloadConfigString(string(cb)).Err
assert.NoError(t, err)
r.Log("yay, spin until their sees it")
waitStart := time.Now()
@@ -570,3 +572,30 @@ func TestCloseTunnelAuthenticated(t *testing.T) {
myControl.Stop()
theirControl.Stop()
}
// TestStagedTunnel completes a handshake and traffic both ways with staged receive. The test tun cannot hand off
// batches, so transmit stays inline; every received packet, handshakes included, uses the receive pipeline on Linux.
// Other platforms must do the same over the inline fallback.
func TestStagedTunnel(t *testing.T) {
t.Parallel()
received := metrics.GetOrRegisterCounter("flow.rx.inline", nil)
before := received.Count()
staged := m{"tun": m{"staged": m{"workers": 2}}}
ca, _, caKey, _ := cert_test.NewTestCaCert(cert.Version1, cert.Curve_CURVE25519, time.Now(), time.Now().Add(10*time.Minute), nil, nil, []string{})
myControl, myVpnIpNet, myUdpAddr, _ := newSimpleServer(cert.Version1, ca, caKey, "me", "10.128.0.1/24", staged)
theirControl, theirVpnIpNet, theirUdpAddr, _ := newSimpleServer(cert.Version1, ca, caKey, "them", "10.128.0.2/24", staged)
myControl.InjectLightHouseAddr(theirVpnIpNet[0].Addr(), theirUdpAddr)
theirControl.InjectLightHouseAddr(myVpnIpNet[0].Addr(), myUdpAddr)
myControl.Start()
theirControl.Start()
r := router.NewR(t, myControl, theirControl)
defer r.RenderFlow()
assertTunnel(t, myVpnIpNet[0].Addr(), theirVpnIpNet[0].Addr(), myControl, theirControl, r)
myControl.Stop()
theirControl.Stop()
if runtime.GOOS != "linux" {
assert.Zero(t, received.Count()-before)
return
}
assert.GreaterOrEqual(t, received.Count()-before, int64(2))
}
+56 -24
View File
@@ -8,6 +8,7 @@ pki:
cert: /etc/nebula/host.crt
key: /etc/nebula/host.key
# blocklist is a list of certificate fingerprints that we will refuse to talk to
# Entries are the hex fingerprints shown by `nebula-cert print`, an invalid entry fails startup and reload.
#blocklist:
# - c99d4e650533b92061b09918e838a5a0a6aaee21eed1d12fd937682865936c72
# disconnect_invalid is a toggle to force a client to be disconnected if the certificate is expired or invalid.
@@ -43,7 +44,7 @@ static_host_map:
lighthouse:
# am_lighthouse is used to enable lighthouse functionality for a node. This should ONLY be true on nodes
# you have configured to be lighthouses in your network
# you have configured to be lighthouses in your network. Not reloadable.
am_lighthouse: false
# serve_dns optionally starts a dns listener that responds to various queries and can even be
# delegated to for resolution
@@ -126,8 +127,9 @@ lighthouse:
# Port Nebula will be listening on. The default here is 4242. For a lighthouse node, the port should be defined,
# however using port 0 will dynamically assign a port and is recommended for roaming nodes.
listen:
# To listen on only ipv4, use "0.0.0.0"
# To listen on only ipv4, use "0.0.0.0". Not reloadable.
host: "::"
# Not reloadable.
port: 4242
# Sets the max number of packets to pull from the kernel for each syscall (under systems that support recvmmsg)
# default is 64, does not support reload
@@ -135,7 +137,8 @@ listen:
# superpacket, so the receive scratch is batch * 64KiB per listening socket (~4MiB per routine at the
# default of 64). Lower this to trade peak per-syscall throughput for memory on constrained hosts.
#batch: 64
# Linux only. Configure socket buffers for the udp side (outside), leave unset to use the system defaults. Values will be doubled by the kernel
# Linux only. Reloadable, but removing a value leaves the socket at the old size until Nebula restarts.
# Configure socket buffers for the udp side (outside), leave unset to use the system defaults. Values will be doubled by the kernel
# Default is net.core.rmem_default and net.core.wmem_default (/proc/sys/net/core/rmem_default and /proc/sys/net/core/rmem_default)
# Maximum is limited by memory in the system, SO_RCVBUFFORCE and SO_SNDBUFFORCE is used to avoid having to raise the system wide
# max, net.core.rmem_max and net.core.wmem_max
@@ -179,7 +182,7 @@ listen:
# Currently, this defaults to 1 which means we have 1 tun queue reader and 1
# UDP queue reader. Setting this above one will set IFF_MULTI_QUEUE on the tun
# device and SO_REUSEPORT on the UDP socket to allow multiple queues.
# This option is only supported on Linux.
# This option is only supported on Linux. Not reloadable.
#routines: 1
punchy:
@@ -203,6 +206,7 @@ punchy:
# Cipher allows you to choose between the available ciphers for your network. Options are chachapoly or aes
# IMPORTANT: this value must be identical on ALL NODES/LIGHTHOUSES. We do not/will not support use of different ciphers simultaneously!
# Not reloadable.
#cipher: aes
# Preferred ranges is used to define a hint about the local network ranges, which speeds up discovering the fastest
@@ -229,12 +233,6 @@ punchy:
# Trusted SSH CA public keys. These are the public keys of the CAs that are allowed to sign SSH keys for access.
#trusted_cas:
#- "ssh public key string"
# sandbox_dir restricts file paths for profiling commands (start-cpu-profile, save-heap-profile,
# save-mutex-profile) to the specified directory. Relative paths will be resolved within this directory,
# and absolute paths outside of it will be rejected. Default is $TMP/nebula-debug.
# The directory is NOT automatically created.
# Overriding this to "" is the same as "/" and will allow overwriting any path on the host.
#sandbox_dir: /var/tmp/nebula-debug
# EXPERIMENTAL: relay support for networks that can't establish direct connections.
relay:
@@ -253,27 +251,66 @@ relay:
# Configure the private interface. Note: addr is baked into the nebula certificate
tun:
# When tun is disabled, a lighthouse can be started without a local tun interface (and therefore without root)
# Not reloadable.
disabled: false
# Name of the device. If not set, a default will be chosen by the OS.
# For macOS: if set, must be in the form `utun[0-9]+`.
# For NetBSD: Required to be set, must be in the form `tun[0-9]+`
# For OpenBSD and NetBSD: if set, must be in the form `tun[0-9]+`, otherwise the first free one is used.
# Not reloadable.
dev: nebula1
# Toggles forwarding of local broadcast packets, the address of which depends on the ip/mask encoded in pki.cert
# Not reloadable.
drop_local_broadcast: false
# Toggles forwarding of multicast packets
# Toggles forwarding of multicast packets. Not reloadable.
drop_multicast: false
# Sets the transmit queue length, if you notice lots of transmit drops on the tun it may help to raise this number. Default is 5000
# Not reloadable.
tx_queue: 5000
# Default MTU for every packet, safe setting is (and the default) 1300 for internet based traffic
# Anything above 8937, here or on a route below, is capped to 8937 with a warning
# Reloadable on Linux only. Where the tun is handed to nebula by a host app (iOS, Android, macOS network extensions)
# the host app owns the MTU.
mtu: 1300
# the use_offloads setting controls if Nebula will attempt to enable GSO and GRO for the tun device. Linux only, not reloadable.
#use_offloads: false
# Linux only. staged.workers enables staged packet processing: each routine hands its batches to this many crypto
# workers per direction, then sends or writes them in order. 0, the default, keeps processing inline. Not reloadable.
# Transmit needs use_offloads; BoringCrypto and FIPS builds keep it inline because AES-GCM there needs ordered nonces.
# Receive needs a listener that can hand off its batches, which Linux has.
# IMPORTANT: staged senders require peers with at least the 8192-entry replay window of this release. Released
# v1.11.x peers use 1024 and are incompatible. The window is not negotiated.
# Staged reservations may use half the window, the other half absorbs inline and control traffic, relay forwarding
# and network reordering; unlimited forwarding or delay can still exceed it. Waiting for credit on a busy tunnel
# also delays the other tunnels of the same read, and readers are not guaranteed fairness.
# Small batches, below inline_below TX segments or RX packets (default 256), can skip the workers. On transmit each
# routine holds one mode, inline on the reader or fanout to the workers and the ordered sender, and switches only
# after gate_hold (default 64) reads in a row want the other one. Before going inline it waits for every batch in
# flight to be submitted to the socket; flow.tx.gate_switches counts the switches. This does not drain NIC queues.
# Relay data always stays on the reader, so gate switches and oversized reads cannot move it between NIC queues.
# Direct data retains the adaptive gate and independent sender placement.
# On receive a listener with nothing in flight writes a small batch itself. With multiple routines, inline sends
# still take tunnel reservation credit. 0 hands direct TX and all RX batches to the workers and ordered stages;
# relayed TX and reads too large for a tunnel's whole credit are still sent by the reader.
# tx: false keeps transmit inline and stages only receive.
# tx_slots and rx_slots bound the batches each routine has in flight per direction, minimum 2. A TX slot holds one
# tun read and its ciphertext, about 1.1 MiB; the default is 8, or workers + 2 if more. An RX slot holds one
# recvmmsg batch, listen.batch * 64 KiB with udp_offloads or * 9 KiB without; the default keeps up to 384 receive
# entries in flight in 4 to 6 slots: 6 slots or 24 MiB at the default listen.batch of 64. Lower them to save memory.
#staged:
# workers: 0
# tx: true
# inline_below: 256
# gate_hold: 64
# tx_slots: 8
# rx_slots: 6
# Linux only. pin_threads pins each tun reader/encrypt OS thread to a single CPU. This keeps every goroutine's
# batched sends flowing through one XPS-selected NIC TX ring, so packets within a flow stay ordered on the wire
# instead of being sprayed across multiple TX rings and reordered. Not reloadable. Coerced to false if routines <= 1.
# Staged senders are only pinned with an explicit cpu_affinity, see below; otherwise the scheduler places them.
# Small batches a reader sends itself can use a different TX ring than its sender.
#pin_threads: true
# pin_threads_key helps the CPU-auto-selector shuffle which CPUs are chosen for pinning.
@@ -283,7 +320,9 @@ tun:
# Linux only. cpu_affinity overrides which CPUs the tun reader threads pin to: a list of CPU IDs, one per routine
# (see the top-level `routines` setting). Lists shorter than `routines` are modulo-cycled across the queues; extra
# entries are ignored. IDs must be within the process's allowed CPU set, so this respects taskset / cgroup cpusets;
# entries are ignored. Staged sender i pins to entry i+1, modulo-cycled the same way, unless that is its reader's
# CPU, as with a one-entry list: a sender never shares its reader's CPU and stays unpinned instead.
# IDs must be within the process's allowed CPU set, so this respects taskset / cgroup cpusets;
# a non-integer or not-allowed entry disables the override, leaving the default pin selection described below.
# Only meaningful while pin_threads is true. Not reloadable.
# When unset (or rejected), the default spread prefers performance cores on heterogeneous CPUs (ARM big.LITTLE,
@@ -295,15 +334,6 @@ tun:
# - 2
# - 4
# Linux only. avoid_cpus lists CPU IDs the tun readers are never pinned to, exactly as listed (SMT siblings are not
# added for you). The default pin selection skips them, and a cpu_affinity entry naming one is rejected like any
# other invalid entry. Other threads are not restricted, and the setting does nothing with pin_threads: false. An
# invalid list, or one covering every allowed CPU, is ignored with a warning. Not reloadable. To keep Nebula off the
# underlay NIC's receive IRQ CPUs, find them in /proc/interrupts and /proc/irq/<IRQ>/effective_affinity_list, add
# their SMT siblings from /sys/devices/system/cpu/cpu<N>/topology/thread_siblings_list if you want those kept clear
# too, and revisit the list when IRQ placement changes.
#avoid_cpus: []
# Route based MTU overrides, you have known vpn ip paths that can support larger MTUs you can increase/decrease them here
routes:
#- mtu: 8800
@@ -367,7 +397,7 @@ tun:
#use_system_route_table: false
# Buffer size for reading routes updates. 0 means default system buffer size. (/proc/sys/net/core/rmem_default).
# If using massive routes updates, for example BGP, you may need to increase this value to avoid packet loss.
# SO_RCVBUFFORCE is used to avoid having to raise the system wide max
# SO_RCVBUFFORCE is used to avoid having to raise the system wide max. Not reloadable.
#use_system_route_table_buffer_size: 0
# Configure logging level
@@ -417,14 +447,16 @@ logging:
# Handshakes are sent to all known addresses at each interval with a linear backoff,
# Wait try_interval after the 1st attempt, 2 * try_interval after the 2nd, etc, until the handshake is older than timeout
# A 100ms interval with the default 10 retries will give a handshake 5.5 seconds to resolve before timing out
# Not reloadable.
#try_interval: 100ms
#retries: 20
# query_buffer is the size of the buffer channel for querying lighthouses, drops are recorded in the lighthouse.query.dropped metric.
# Not reloadable.
#query_buffer: 1024
# trigger_buffer is the size of the buffer channel for quickly sending handshakes
# after receiving the response for lighthouse queries
# after receiving the response for lighthouse queries. Not reloadable.
#trigger_buffer: 64
# Tunnel manager settings
+123
View File
@@ -0,0 +1,123 @@
package nebula
import (
"log/slog"
"runtime"
"sync"
"github.com/slackhq/nebula/config"
"github.com/slackhq/nebula/noiseutil"
)
// Staged processing (tun.staged.workers) moves crypto off each tun reader and udp listener onto worker goroutines,
// behind which an ordered stage sends or writes every batch in read order. It reuses the inline packet handlers:
// staging changes ownership and scheduling, not policy. Each routine has its own workers and ordered stages, so order
// is per routine. Full queues block the reader. A read error drains the batches in flight, while shutdown waits for
// the crypto and then drops packets whose destination has closed. A TX slot holds one tun read and its ciphertext,
// about 1.1 MiB; there are eight, or two more than the workers. An RX slot holds one recvmmsg batch, listen.batch
// times 64 KiB with GRO, and the count keeps up to 384 entries in flight in four to six slots: six and 24 MiB at
// listen.batch=64.
// tun.staged.tx_slots and rx_slots override the counts. Small-MSS TX arenas can grow.
// Relay data stays on the tun reader, regardless of the TX gate, so it never switches between reader and sender
// NIC queues. Direct data keeps its adaptive placement; relay and direct batches both share tunnel counter credit.
//
// Metrics are registered only for active pipelines. flow.{tx,rx}.batches counts reads handed to the ordered stage and
// flow.{tx,rx}.inline those the reader handled itself (TX inline also counts oversized reads); their rates show
// whether staging is used. flow.tx.gate_switches counts transmit switches between inline and fanout mode.
// stagedConfig is tun.staged. workers is per routine and direction; zero keeps processing inline.
type stagedConfig struct {
workers int
tx bool
rx bool
// inlineBelow is the TX segment or RX packet count below which a read may skip the worker handoff, 0 never: a TX
// read in inline mode, an RX read with nothing in flight
inlineBelow int
// txSlots and rxSlots are how many batches each routine can have in flight per direction
txSlots, rxSlots int
// gateHold is how many TX reads in a row must want the other mode before a routine switches between inline and
// fanout transmit
gateHold int
}
// stagedGateHold is the default tun.staged.gate_hold
const stagedGateHold = 64
const (
// stagedTxSlots is the default TX slot count, unless the workers need more
stagedTxSlots = 8
// stagedRxEntries is how many recvmmsg entries the RX slots hold in flight by default
stagedRxEntries = 6 * 64
// stagedMinSlots lets the reader fill one batch while another is in flight
stagedMinSlots = 2
// stagedMinRxSlots keeps the default RX pipeline deep enough for large listen.batch values
stagedMinRxSlots = 4
// stagedMaxRxSlots is the measured default, a smaller listen.batch does not take more slots
stagedMaxRxSlots = 6
)
// stagedSlots sizes the TX and RX slots. TX reads are bounded by the tun queue, so one slot per worker plus the one
// being read and the one being sent, and at least the eight measured. RX slots keep stagedRxEntries in flight, four
// to six, so a larger listen.batch means fewer slots and RX memory never exceeds the six measured. A positive override replaces either, down to stagedMinSlots.
func stagedSlots(workers, batch, txOverride, rxOverride int) (tx, rx int) {
tx = max(stagedTxSlots, workers+2)
rx = min(max(stagedMinRxSlots, (stagedRxEntries+batch-1)/max(batch, 1)), stagedMaxRxSlots)
if txOverride > 0 {
tx = max(txOverride, stagedMinSlots)
}
if rxOverride > 0 {
rx = max(rxOverride, stagedMinSlots)
}
return tx, rx
}
// parseStagedConfig enables staging on Linux only; queues and conns that cannot hand off batches also stay inline.
func parseStagedConfig(c *config.C, l *slog.Logger) stagedConfig {
sc := stagedConfig{workers: c.GetInt("tun.staged.workers", 0)}
if sc.workers <= 0 {
return stagedConfig{}
}
if runtime.GOOS != "linux" {
l.Warn("tun.staged is only supported on Linux; packet processing stays inline")
return stagedConfig{}
}
sc.tx, sc.rx = c.GetBool("tun.staged.tx", true), true
// 256 is the measured crossover, 0 hands every batch to the workers
sc.inlineBelow = max(c.GetInt("tun.staged.inline_below", 256), 0)
if sc.tx && noiseutil.EncryptLockNeeded {
l.Warn("tun.staged cannot encrypt in parallel with boringcrypto or fips140; transmit stays inline")
sc.tx = false
}
sc.gateHold = max(c.GetInt("tun.staged.gate_hold", stagedGateHold), 1)
sc.txSlots, sc.rxSlots = stagedSlots(sc.workers, c.GetInt("listen.batch", 64),
c.GetInt("tun.staged.tx_slots", 0), c.GetInt("tun.staged.rx_slots", 0))
l.Info("Staged packet processing enabled", "workers", sc.workers, "tx", sc.tx, "rx", sc.rx,
"inlineBelow", sc.inlineBelow, "gateHold", sc.gateHold,
"txSlots", sc.txSlots, "rxSlots", sc.rxSlots)
return sc
}
// flowJob is one batch of crypto work. It owns its packet buffers until run returns; jobs and queues are reused.
type flowJob interface{ run(nb []byte) }
// flowPool runs one reader's crypto jobs. The reader is the only producer and closes the pool once its ordered stage
// has drained.
type flowPool struct {
jobs chan flowJob
wg sync.WaitGroup
}
func newFlowPool(workers, queueLen int) *flowPool {
p := &flowPool{jobs: make(chan flowJob, queueLen)}
for range workers {
p.wg.Go(func() {
nb := make([]byte, 12)
for job := range p.jobs {
job.run(nb)
}
})
}
return p
}
func (p *flowPool) close() { close(p.jobs); p.wg.Wait() }
+177
View File
@@ -0,0 +1,177 @@
package nebula
import (
"sync/atomic"
"time"
"github.com/slackhq/nebula/overlay/tio"
)
// txBudget is the reservation credit of one tunnel, shared by every staged reader sending on it. The low 24 bits of
// state are outstanding counters, the next 24 spent credit, and the top 16 the sole ordered reader (q+1); owner zero
// means shared. Readers beyond the owner field's range always take the conservative shared path.
//
// A cap on outstanding counters alone is not enough: a fast reader could repeatedly send and reacquire credit,
// overtaking a paused reader by arbitrarily far. So once readers overlap, or another reader is blocked, spent credit
// is only recycled when ALL reservations have drained. A sole reader instead gets each ordered completion refunded,
// its later batches cannot overtake its earlier ones. All transitions are one CAS, without locks.
//
// The credit is half the peer's replay window. The other half is left for uncredited sends and transport reordering:
// inline and control traffic, and relay forwarding through SendVia, which takes counters on the relay tunnel without
// credit. Unlimited bypass traffic or network delay can still exceed it. The window is not negotiated, so
// ci.window.length, from the build-time ReplayWindow, is also the assumed peer window.
type txBudget struct{ state atomic.Uint64 }
const txBudgetMask = uint64(1<<24 - 1)
// Fail compilation for unsupported build-time windows: a power of two, at least 8192, fitting the credit fields (up
// to 16777216).
const (
_ = uint64(txBudgetMask) - ReplayWindow/2
_ = uint64(ReplayWindow) - 8192
_ = uint64(0) - (ReplayWindow & (ReplayWindow - 1))
)
func txBudgetOwner(q int) uint64 {
if q < 0 || q >= 65535 {
return 0
}
return uint64(q + 1)
}
func (b *txBudget) acquire(n, limit, owner uint64) bool {
for {
old := b.state.Load()
pending, spent, who := old&txBudgetMask, (old>>24)&txBudgetMask, old>>48
if n > limit || spent > limit-n {
// A blocked reader ends sole ownership so ordered completions stop refunding credit. Otherwise a busy
// owner could keep a larger waiter blocked forever without ever sharing a reservation.
if who != 0 && who != owner && !b.state.CompareAndSwap(old, old&^(uint64(0xffff)<<48)) {
continue
}
return false
}
if pending == 0 {
who = owner
} else if who != owner {
who = 0
}
next := who<<48 | (spent+n)<<24 | (pending + n)
if b.state.CompareAndSwap(old, next) {
return true
}
}
}
// release runs only after the socket flush or an explicit drop. A rollback returns credit before any message counter
// was allocated, as when a later tunnel of a relay or multi-tunnel batch could not acquire its own.
func (b *txBudget) release(n uint64, rollback bool) {
for {
old := b.state.Load()
pending, spent, owner := old&txBudgetMask, (old>>24)&txBudgetMask, old>>48
pending -= n
if rollback || owner != 0 {
spent -= n
}
next := owner<<48 | spent<<24 | pending
if pending == 0 {
next = 0
}
if b.state.CompareAndSwap(old, next) {
return
}
}
}
func (ci *ConnectionState) txBudgetLimit() uint64 { return ci.window.length / 2 }
func (r *txReserver) oversized() bool {
for _, t := range r.tunnels {
if t.n > t.ci.txBudgetLimit() {
return true
}
}
return false
}
func (r *txReserver) tryBudget() bool {
for i, t := range r.tunnels {
if !t.ci.txBudget.acquire(t.n, t.ci.txBudgetLimit(), r.owner) {
for _, acquired := range r.tunnels[:i] {
acquired.ci.txBudget.release(acquired.n, true)
}
return false
}
}
return true
}
// waitBudget acquires credit for every tunnel of the batch, never holding a partial acquisition while it waits. Each
// reader first flushes its own oldest batch, flushes need no credit; with none, another reader holds all outstanding
// work and can flush it independently. So there is no circular wait, even with relay tunnels acquired in opposite
// orders. The sleep is only for readers with no local work, not the uncontended hot path. Acquisition is
// all-or-nothing within each direct or relay batch, so pressure on one tunnel also delays packets for idle tunnels
// in that batch. Reader fairness is not guaranteed.
func (p *stagedTx) waitBudget(r *txReserver) bool {
if r.tryBudget() {
return true
}
for {
if p.f.closed.Load() {
return false
}
if !p.flushOldest() {
time.Sleep(50 * time.Microsecond)
}
if r.tryBudget() {
return true
}
}
}
func (s *txSlot) releaseBudget() {
for _, t := range s.reservations {
t.ci.txBudget.release(t.n, false)
}
clear(s.reservations)
s.reservations = s.reservations[:0]
}
// sendLarge handles the unusual reads that exceed a whole tunnel's credit, such as tiny-MSS superpackets. It drains
// the pipeline, then segments and sends them synchronously with credit for each segment, never exceeding the cap and
// never filtering or running connection manager side effects twice. This deliberately slow path avoids a lone-batch
// exception to the shared invariant.
func (p *stagedTx) sendLarge(r *txReserver, items []txItem) {
for p.flushOldest() {
}
for _, it := range items {
err := tio.SegmentSuperpacket(it.pkt, func(seg []byte) error {
if p.f.closed.Load() {
return nil
}
part := it
part.pkt, part.segs = tio.Packet{Bytes: seg}, 1
r.tunnels = r.tunnels[:0]
part.counter = r.need(part.hostinfo, part.ci, 1)
if part.relayHI != nil {
part.relayCounter = r.need(part.relayHI, part.relayHI.ConnectionState, 1)
}
if !p.waitBudget(r) {
return nil
}
one := [1]txItem{part}
if reserved := r.reserve(one[:]); len(reserved) != 0 {
p.f.encryptTxItem(&reserved[0], p.nb, p.sb)
p.f.flushSendBatch(p.sb, p.q)
}
for _, t := range r.tunnels {
t.ci.txBudget.release(t.n, false)
}
return nil
})
if err != nil {
it.hostinfo.logger(p.f.l).Error("Failed to segment superpacket for send", "error", err)
}
}
clear(items)
}
+104
View File
@@ -0,0 +1,104 @@
package nebula
import (
"fmt"
"testing"
"github.com/slackhq/nebula/test"
"github.com/stretchr/testify/require"
)
var budgetWindows = []uint64{8192, 65536}
// TestTXBudgetOvertaking: a fast sender must not recycle credit around a stalled older reservation. A pure in-flight
// count passes the cap assertion but fails this replay test.
func TestTXBudgetOvertaking(t *testing.T) {
for _, window := range budgetWindows {
t.Run(fmt.Sprint(window), func(t *testing.T) {
var b txBudget
limit := window / 2
w := NewBits(window)
l := test.NewLogger()
require.True(t, b.acquire(1, limit, 1)) // counter 1 stalls
for counter := uint64(2); counter <= limit; counter++ {
require.True(t, b.acquire(1, limit, 2))
require.True(t, w.Update(l, counter))
b.release(1, false)
}
require.Equal(t, uint64(1), b.state.Load()&txBudgetMask)
require.False(t, b.acquire(1, limit, 2), "spent credit cannot be recycled while the oldest sender stalls")
// The other half of the window allows this many unreserved sends.
for counter := limit + 1; counter <= window; counter++ {
require.True(t, w.Update(l, counter))
}
require.True(t, w.Update(l, 1), "oldest reservation must still fit after using the whole margin")
b.release(1, false)
require.Zero(t, b.state.Load())
require.True(t, b.acquire(limit, limit, 2))
require.False(t, b.acquire(1, limit, 2))
b.release(limit, false)
})
}
}
// TestTXBudgetBlockedReader models eight 512-segment reads of a busy owner and a 568-segment waiter, without socket
// timing. Alone, the owner gets each completion refunded, so it keeps eight batches in flight forever, even across its
// own failed acquisitions. But even when the owner always retries first, its completions must stop refunding credit
// once the waiter is blocked, and let the budget drain. Waiter 0 is the conservative ID of readers beyond the owner
// field's range.
func TestTXBudgetBlockedReader(t *testing.T) {
for _, waiter := range []uint64{1, 0} {
t.Run(fmt.Sprintf("waiter=%d", waiter), func(t *testing.T) {
var b txBudget
const limit, n, want = uint64(4096), uint64(512), uint64(568)
for range 8 {
require.True(t, b.acquire(n, limit, 2))
}
for range 100 {
require.False(t, b.acquire(n, limit, 2))
b.release(n, false) // the sole sender flushes its oldest batch
require.True(t, b.acquire(n, limit, 2))
require.Equal(t, 8*n, b.state.Load()&txBudgetMask)
}
require.False(t, b.acquire(want, limit, waiter))
for range 7 {
b.release(n, false)
require.False(t, b.acquire(n, limit, 2), "blocked reader must stop the owner's credit recycling")
require.False(t, b.acquire(want, limit, waiter))
}
b.release(n, false)
require.Zero(t, b.state.Load())
// Even if the former owner wins the next acquisition, both now fit.
require.True(t, b.acquire(n, limit, 2))
require.True(t, b.acquire(want, limit, waiter))
b.release(n, false)
b.release(want, false)
require.Zero(t, b.state.Load())
})
}
}
// TestTXBudgetRelayRollback: when a later tunnel of a batch cannot acquire, the earlier ones give their credit back,
// spent credit included.
func TestTXBudgetRelayRollback(t *testing.T) {
for _, window := range budgetWindows {
inner := &ConnectionState{window: NewBits(window)}
outer := &ConnectionState{window: NewBits(window)}
limit := inner.txBudgetLimit()
require.True(t, inner.txBudget.acquire(10, limit, 1))
require.True(t, outer.txBudget.acquire(limit, limit, 1))
r := txReserver{owner: 2, tunnels: []txTunnel{{ci: inner, n: 20}, {ci: outer, n: 20}}}
for range 100 {
require.False(t, r.tryBudget())
require.Equal(t, uint64(10), inner.txBudget.state.Load()&txBudgetMask)
require.Equal(t, uint64(10), (inner.txBudget.state.Load()>>24)&txBudgetMask, "rollback must refund spent credit too")
}
outer.txBudget.release(limit, false)
require.True(t, r.tryBudget())
inner.txBudget.release(20, false)
outer.txBudget.release(20, false)
inner.txBudget.release(10, false)
require.Zero(t, inner.txBudget.state.Load())
require.Zero(t, outer.txBudget.state.Load())
}
}
+135
View File
@@ -0,0 +1,135 @@
//go:build linux && !android && !e2e_testing
package nebula
import (
"fmt"
"testing"
"time"
"github.com/flynn/noise"
"github.com/rcrowley/go-metrics"
"github.com/slackhq/nebula/overlay/tio"
"github.com/slackhq/nebula/udp"
"github.com/stretchr/testify/require"
"go.uber.org/goleak"
)
// gated is staging with an inline threshold of 4 segments and the given gate hold.
func gated(hold int) stagedConfig {
sc := adaptive(2)
sc.inlineBelow, sc.gateHold = 4, hold
return sc
}
// gateCounters snapshots the transmit counters a gate test checks.
type gateCounters struct{ inline, batches, switches int64 }
func readGateCounters() gateCounters {
return gateCounters{
inline: metrics.GetOrRegisterCounter("flow.tx.inline", nil).Count(),
batches: metrics.GetOrRegisterCounter("flow.tx.batches", nil).Count(),
switches: metrics.GetOrRegisterCounter("flow.tx.gate_switches", nil).Count(),
}
}
func (c gateCounters) since(c0 gateCounters) gateCounters {
return gateCounters{c.inline - c0.inline, c.batches - c0.batches, c.switches - c0.switches}
}
// gateReads builds reads of small (3 segments, below the threshold) or large (2 superpackets of 9) shape, in order,
// for one flow, and the segments they carry.
func gateReads(large ...bool) ([][]tio.Packet, []decodedSeg) {
var reads [][]tio.Packet
var want []decodedSeg
seq := uint32(0)
for _, l := range large {
per, segs := 1, 3
if l {
per, segs = 2, 9
}
var b []tio.Packet
for range per {
b = append(b, flowTCPSuperpacket(0, seq, segs))
for s := range segs {
want = append(want, decodedSeg{seq: seq, idx: uint16(s)})
}
seq++
}
reads = append(reads, b)
}
return reads, want
}
func repeatBool(v bool, n int) []bool {
out := make([]bool, n)
for i := range out {
out[i] = v
}
return out
}
// TestFlowStagedTXGateSwitch forces the gate from inline to fanout and back, with a slow socket and slow
// workers so the fanout batches are still in flight when the small reads arrive: wire order is read order, counters
// are contiguous, and each switch happens on exactly the gate_hold-th read that wants it.
func TestFlowStagedTXGateSwitch(t *testing.T) {
defer goleak.VerifyNone(t, goleak.IgnoreCurrent())
const hold = 3
for _, routines := range []int{1, 2} {
t.Run(fmt.Sprintf("routines=%d", routines), func(t *testing.T) {
sender, receiver := newFlowTestPair(t, noise.CipherChaChaPoly, gated(hold))
sender.f.routines = routines
sender.f.writers = []udp.Conn{sender.conn, sender.conn}
delayCrypto(sender, func(n uint64) {
if n%7 == 0 {
time.Sleep(time.Millisecond)
}
})
sender.conn.delay = 4 * time.Millisecond
// 4 small inline, 2 large held inline, 6 large fanout from the switch on, 2 small held in fanout, then
// the switch back drains and 3 small go inline
shape := append(repeatBool(false, 4), repeatBool(true, 8)...)
shape = append(shape, repeatBool(false, 5)...)
reads, want := gateReads(shape...)
ci := sender.hostinfo.ConnectionState
start := ci.messageCounter.Load()
c0 := readGateCounters()
p := newStagedTx(sender.f, newFlowBatchQueue(nil), 0)
for i, r := range reads {
p.send(r)
if i == 13 {
require.Positive(t, p.inFlight, "fanout batches must still be in flight when the small reads start")
}
if i == 14 {
require.Zero(t, p.inFlight, "switching to inline drains the pipeline")
}
}
p.close()
require.Equal(t, want, decryptWire(t, receiver, sender.conn.captured()), "wire order must match read order")
require.Equal(t, start+uint64(len(want)), ci.messageCounter.Load(), "every reserved counter is used once")
require.Equal(t, gateCounters{inline: 4 + 2 + 3, batches: 6 + 2, switches: 2}, readGateCounters().since(c0))
require.Zero(t, ci.txBudget.state.Load())
})
}
}
// TestFlowStagedTXGateHold: the gate never switches before gate_hold consecutive reads want the other mode, and
// a read that wants the current mode restarts the count.
func TestFlowStagedTXGateHold(t *testing.T) {
defer goleak.VerifyNone(t, goleak.IgnoreCurrent())
const hold = 5
sender, receiver := newFlowTestPair(t, noise.CipherChaChaPoly, gated(hold))
shape := append(repeatBool(true, hold-1), false)
shape = append(shape, repeatBool(true, hold-1)...)
reads, want := gateReads(append(shape, true)...)
c0 := readGateCounters()
p := newStagedTx(sender.f, newFlowBatchQueue(nil), 0)
for _, r := range reads[:len(reads)-1] {
p.send(r)
}
require.Equal(t, gateCounters{inline: 2*hold - 1}, readGateCounters().since(c0), "no switch before gate_hold")
p.send(reads[len(reads)-1])
require.Equal(t, gateCounters{inline: 2*hold - 1, batches: 1, switches: 1}, readGateCounters().since(c0))
p.close()
require.Equal(t, want, decryptWire(t, receiver, sender.conn.captured()))
}
+371
View File
@@ -0,0 +1,371 @@
package nebula
import (
"encoding/binary"
"net/netip"
"github.com/rcrowley/go-metrics"
"github.com/slackhq/nebula/header"
"github.com/slackhq/nebula/udp"
)
// handoffConn is a udp conn that can hand each received batch over. The callback returns replacement buffers with
// the same count and at least the same lengths.
type handoffConn interface {
ListenOutHandoff(udp.EncReader, func([][]byte) [][]byte) error
}
const rxChunkMin = 16
// rxItem is one received packet. A data packet for an established tunnel has ci set; out and err are written by
// whoever decrypts it.
type rxItem struct {
packet []byte
hostinfo *HostInfo
ci *ConnectionState
counter uint64
via netip.AddrPort
out []byte
err error
}
// rxChunk is a contiguous run of a batch's items for one worker to decrypt.
type rxChunk struct {
items []rxItem
done chan struct{}
}
func (c *rxChunk) run(nb []byte) {
decryptRxItems(c.items, nb)
c.done <- struct{}{}
}
// decryptRxItems decrypts the data packets among items in place. The replay window is left to the ordered stage, as
// are packets without a tunnel and the known replays precheck marked.
func decryptRxItems(items []rxItem, nb []byte) {
for i := range items {
it := &items[i]
if it.ci == nil || it.err != nil {
continue
}
it.out, it.err = it.ci.decryptPacket(it.counter, it.packet, nb)
}
}
// rxBatch is one recvmmsg batch moving through the staged receive pipeline.
type rxBatch struct {
// items is every packet of the batch in arrival order. Data packets are decrypted by a worker; anything else is
// handled whole by the writer, in its place.
items []rxItem
data int
// bufs is the set of recvmmsg buffers the items point into, owned by the batch from handoff until it is reused.
bufs [][]byte
// chunks are the decrypt jobs, nChunks of them in use. With none the writer decrypts the batch itself.
chunks []rxChunk
nChunks int
}
func (b *rxBatch) reset() {
clear(b.items)
b.items = b.items[:0]
b.data = 0
for i := range b.nChunks {
b.chunks[i].items = nil
}
b.nChunks = 0
}
// stagedRx is the staged receive pipeline of one udp listener. deliver and handoff run on the listener goroutine.
type stagedRx struct {
f *Interface
q int
pool *flowPool
// h and hostmapCache are the listener's own. wrxc is the commit context: the writer's, or the listener's while
// nothing is in flight.
h *header.H
hostmapCache map[uint32]*HostInfo
wrxc *rxContext
cur *rxBatch
free []*rxBatch
ordered chan *rxBatch
returned chan *rxBatch
inFlight int
writerDone chan struct{}
metricBatches metrics.Counter
metricInline metrics.Counter
}
func newStagedRx(f *Interface, q int, wrxc *rxContext) *stagedRx {
p := &stagedRx{
f: f,
q: q,
h: &header.H{},
hostmapCache: map[uint32]*HostInfo{},
wrxc: wrxc,
ordered: make(chan *rxBatch, f.staged.rxSlots),
returned: make(chan *rxBatch, f.staged.rxSlots),
writerDone: make(chan struct{}),
metricBatches: metrics.GetOrRegisterCounter("flow.rx.batches", nil),
metricInline: metrics.GetOrRegisterCounter("flow.rx.inline", nil),
}
workers := f.staged.workers
p.pool = newFlowPool(workers, f.staged.rxSlots*2*workers)
for range f.staged.rxSlots {
// Two chunks per worker, so the writer can start committing while the workers are still on the rest
b := &rxBatch{items: make([]rxItem, 0, 256), chunks: make([]rxChunk, 2*workers)}
for i := range b.chunks {
b.chunks[i].done = make(chan struct{}, 1)
}
p.free = append(p.free, b)
}
p.cur = p.free[len(p.free)-1]
p.free = p.free[:len(p.free)-1]
go p.writer()
return p
}
// listen runs the conn's receive loop through the pipeline until it fails, then drains the pipeline. The conn hands
// its buffers over, so a batch moves between stages without a copy.
func (p *stagedRx) listen(li handoffConn) error {
defer p.close()
return li.ListenOutHandoff(p.deliver, p.handoff)
}
// deliver is the listener's per-packet work: classify the packet and add it to the current batch. Nothing here
// decrypts or touches the tun.
func (p *stagedRx) deliver(via netip.AddrPort, packet []byte) {
b := p.cur
it := rxItem{packet: packet, via: via}
p.classify(&it)
if it.ci != nil {
b.data++
}
b.items = append(b.items, it)
}
// classify fills in the tunnel for a plain data packet of an established, non-relayed tunnel, leaving anything else
// for the writer to handle whole. The replay pre-check waits for the end of the batch, see precheck.
func (p *stagedRx) classify(it *rxItem) {
f := p.f
h := p.h
packet := it.packet
if h.Parse(packet) != nil || h.Version != header.Version || h.Type != header.Message || h.Subtype != header.MessageNone {
return
}
if f.myVpnNetworksTable.Contains(it.via.Addr()) {
return
}
hostinfo := f.hostMap.QueryIndexCached(h.RemoteIndex, p.hostmapCache)
if hostinfo == nil || hostinfo.ConnectionState == nil {
return
}
ci := hostinfo.ConnectionState
if len(packet) < header.Len+ci.dKey.Overhead() {
return
}
it.hostinfo, it.ci, it.counter = hostinfo, ci, h.MessageCounter
}
// precheck marks obvious replays before anything decrypts them, like ConnectionState.Decrypt does, taking each
// tunnel's lock once per run of its packets rather than once per packet: the writer takes the same lock for its
// window updates, from another core. The writer checks again when it commits. The window only moves forward in
// between, so a stale check here can only let a replay through to that second check. Marked packets keep their
// place: an earlier RecvError may delete their tunnel, and inline receive then replies with a RecvError rather than
// dropping a replay.
func (p *stagedRx) precheck(b *rxBatch) {
f := p.f
items := b.items
for i := 0; i < len(items); {
ci := items[i].ci
if ci == nil {
i++
continue
}
ci.decryptLock.Lock()
for ; i < len(items) && items[i].ci == ci; i++ {
if ci.window.Check(f.l, items[i].counter) {
continue
}
b.data--
items[i].err = ErrAlreadySeen
}
ci.decryptLock.Unlock()
}
}
// handoff ends a batch: the batch takes bufs, and the conn reads the next batch into the buffers of the next free
// batch.
func (p *stagedRx) handoff(bufs [][]byte) [][]byte {
p.cur.bufs = bufs
p.endBatch()
b := p.cur
if len(b.bufs) != len(bufs) || len(b.bufs[0]) < len(bufs[0]) {
b.bufs = make([][]byte, len(bufs))
for i := range b.bufs {
b.bufs[i] = make([]byte, len(bufs[0]))
}
}
return b.bufs
}
// endBatch hands the batch to the workers and the ordered writer, then takes a free batch.
func (p *stagedRx) endBatch() {
clear(p.hostmapCache)
p.reap()
b := p.cur
p.precheck(b)
n := len(b.items)
if n == 0 {
b.reset()
return
}
if p.inFlight == 0 && n < p.f.staged.inlineBelow {
// The writer is idle with nothing in flight, so the listener may commit with its context and flush the tun
p.metricInline.Inc(1)
p.process(b, p.wrxc)
b.reset()
return
}
parts := min(len(b.chunks), b.data/rxChunkMin)
p.metricBatches.Inc(1)
if parts > 0 {
size := (n + parts - 1) / parts
for off := 0; off < n; off += size {
c := &b.chunks[b.nChunks]
c.items = b.items[off:min(off+size, n)]
b.nChunks++
}
}
// The jobs go out before the batch does: once the writer has it, it may finish and reset it at any moment
for i := range b.nChunks {
p.pool.jobs <- &b.chunks[i]
}
p.inFlight++
p.ordered <- b
if len(p.free) == 0 {
// Every batch is in flight, wait for the writer: the socket buffer absorbs the backlog meanwhile.
p.release(<-p.returned)
}
p.cur = p.free[len(p.free)-1]
p.free = p.free[:len(p.free)-1]
}
// reap takes back every batch the writer has finished with, without waiting.
func (p *stagedRx) reap() {
for {
select {
case b := <-p.returned:
p.release(b)
default:
return
}
}
}
func (p *stagedRx) release(b *rxBatch) {
p.inFlight--
p.free = append(p.free, b)
}
// process is the ordered stage for one batch: decrypt whatever no worker is decrypting, commit every item in arrival
// order, and flush the tun batcher.
func (p *stagedRx) process(b *rxBatch, rxc *rxContext) {
if b.nChunks == 0 {
decryptRxItems(b.items, rxc.nb)
p.commit(b.items, rxc)
} else {
// Commit chunk by chunk, so the commit overlaps the workers still on later chunks
for i := range b.nChunks {
c := &b.chunks[i]
<-c.done
p.commit(c.items, rxc)
}
}
p.f.flushOutside(rxc)
}
// commit runs the ordered stage over items in arrival order. A non-data packet goes through readOutsidePackets in
// its place, a run of data packets on one tunnel through commitRun.
func (p *stagedRx) commit(items []rxItem, rxc *rxContext) {
for i := 0; i < len(items); {
ci := items[i].ci
if ci == nil {
p.f.readOutsidePackets(ViaSender{UdpAddr: items[i].via}, items[i].packet, rxc)
i++
continue
}
j := i + 1
for j < len(items) && items[j].ci == ci {
j++
}
p.commitRun(items[i:j], rxc)
i = j
}
}
// commitRun commits a run of decrypted data packets on one tunnel. The window updates go first, under one lock, then
// the rest; handling a data packet never touches the window, so that is the same as one packet at a time.
func (p *stagedRx) commitRun(run []rxItem, rxc *rxContext) {
f := p.f
ci := run[0].ci
// Classification is speculative: earlier control packets may have removed this tunnel. Resolve it through the
// writer's batch-local cache, exactly where inline processing would, before touching replay state.
index := binary.BigEndian.Uint32(run[0].packet[4:8])
hostinfo := f.hostMap.QueryIndexCached(index, rxc.hostmapCache)
if hostinfo != run[0].hostinfo || hostinfo.ConnectionState != ci {
if hostinfo == nil {
for i := range run {
f.maybeSendRecvError(run[i].via, index)
}
}
return
}
ci.decryptLock.Lock()
for i := range run {
// A packet that failed to decrypt does not touch the window, like ConnectionState.Decrypt
if run[i].err == nil && !ci.window.Update(f.l, run[i].counter) {
run[i].err = ErrAlreadySeen
}
}
ci.decryptLock.Unlock()
for i := range run {
it := &run[i]
if f.finishOutsideDecrypt(it.hostinfo, ViaSender{UdpAddr: it.via}, it.counter, it.err) {
f.handleOutsideMessagePacket(it.hostinfo, it.counter, it.out, rxc)
}
}
}
// writer is the ordered receive stage: window, firewall, coalescer and tun write, one batch at a time in arrival
// order.
func (p *stagedRx) writer() {
defer close(p.writerDone)
for b := range p.ordered {
if p.f.closed.Load() {
// The tun is going away, a write would only log errors. Still wait out the workers on the batch.
for i := range b.nChunks {
<-b.chunks[i].done
}
} else {
p.process(b, p.wrxc)
}
b.reset()
p.returned <- b
}
}
// close commits anything still in flight, in order, and stops the writer and the workers.
func (p *stagedRx) close() {
if len(p.cur.items) > 0 {
p.endBatch()
}
close(p.ordered)
<-p.writerDone
p.pool.close()
}
+237
View File
@@ -0,0 +1,237 @@
//go:build linux && !android && !e2e_testing
package nebula
import (
"fmt"
"net/netip"
"sync/atomic"
"testing"
"time"
"github.com/flynn/noise"
"github.com/rcrowley/go-metrics"
"github.com/slackhq/nebula/header"
"github.com/slackhq/nebula/noiseutil"
"github.com/slackhq/nebula/udp"
"github.com/stretchr/testify/require"
"go.uber.org/goleak"
)
// TestFlowStagedRXOrderAndReplay feeds every packet behind a forgery of it, from another address, and a replay of
// it, then a test packet that jumps the window and the whole stream again, with shuffled workers and a slow tun,
// through small and large batches: the tun sees each segment once, in order, the window marks them all, the forgeries
// neither consume a counter nor roam, and the jump does not get the earlier data packets of its batch rejected.
func TestFlowStagedRXOrderAndReplay(t *testing.T) {
defer goleak.VerifyNone(t, goleak.IgnoreCurrent())
for _, cipher := range []noise.CipherFunc{noiseutil.CipherAESGCM, noise.CipherChaChaPoly} {
for _, batchLen := range []int{8, 1000} {
t.Run(fmt.Sprintf("%s/batch=%d", cipher.CipherName(), batchLen), func(t *testing.T) {
sender, receiver := newFlowTestPair(t, cipher, stagedOn(4))
delayCrypto(receiver, func(n uint64) {
if n%32 == 0 {
time.Sleep(time.Millisecond)
}
})
receiver.tun.delay = 100 * time.Microsecond
batches, want := flowTestBatches(30, 4, 1, 10)
wire := wireFor(t, sender, batches)
var feed [][]byte
for i, p := range wire {
// Corrupt the tag or the payload
bad := append([]byte(nil), p...)
bad[[]int{len(p) - 1, header.Len + 3}[i%2]] ^= 1
feed = append(feed, bad, p, p)
}
// The jump lands in a batch with fresh data before it, at batch=1000
sender.hostinfo.ConnectionState.messageCounter.Add(2 * ReplayWindow)
feed = append(append(feed, sendControl(sender, header.Test, header.TestReply)), wire...)
forged := func(i int) netip.AddrPort {
if i < 3*len(wire) && i%3 == 0 {
return netip.MustParseAddrPort("198.51.100.9:4242")
}
return flowTestUnder
}
rx0 := rxBatches.Count()
conn := &rxConn{wire: feed, batchLen: batchLen, from: forged}
receiver.receive(conn)
require.Positive(t, rxBatches.Count()-rx0)
require.Equal(t, (len(feed)+batchLen-1)/batchLen, conn.swaps, "every batch is handed off")
require.Equal(t, want, receiver.tun.segments(t), "every packet exactly once, in order")
require.Equal(t, flowTestUnder, receiver.hostinfo.GetRemote())
for _, p := range wire {
h := &header.H{}
require.NoError(t, h.Parse(p))
require.False(t, receiver.hostinfo.ConnectionState.window.Check(receiver.f.l, h.MessageCounter), "counter %d must be marked seen", h.MessageCounter)
}
})
}
}
}
// TestFlowStagedRXClose: a CloseTunnel in the middle of a batch is handled in its place, by the writer. The data after
// it in the batch is still delivered from the batch's hostmap cache, as inline receive does.
func TestFlowStagedRXClose(t *testing.T) {
defer goleak.VerifyNone(t, goleak.IgnoreCurrent())
sender, receiver := newFlowTestPair(t, noise.CipherChaChaPoly, stagedOn(2))
batches, want := flowTestBatches(4, 4, 1, 8)
wire := wireFor(t, sender, batches)
half := len(wire) / 2
feed := append(append(append([][]byte{}, wire[:half]...), sendControl(sender, header.CloseTunnel, 0)), wire[half:]...)
receiver.receive(&rxConn{wire: feed, batchLen: len(feed)})
require.Equal(t, want, receiver.tun.segments(t))
require.Nil(t, receiver.f.hostMap.QueryIndex(receiver.hostinfo.localIndexId))
}
// sendControl returns the wire packet of a control message from sender.
func sendControl(sender *flowTestPeer, typ header.MessageType, st header.MessageSubType) []byte {
sender.f.sendNoMetrics(typ, st, sender.hostinfo.ConnectionState, sender.hostinfo, flowTestUnder, nil, make([]byte, 12), make([]byte, mtu), 0)
wire := sender.conn.captured()
sender.conn.pkts, sender.conn.addrs = nil, nil
return wire[len(wire)-1]
}
// receivePaths is inline, staged and, with the threshold, adaptive receive.
func receivePaths() []stagedConfig {
return []stagedConfig{{}, stagedOn(2), adaptive(2)}
}
// TestFlowStagedRXRecvError feeds a RecvError that deletes the tunnel, then a known replay and new data for it, in one
// batch. Every receive path must drop the data through its own view of the hostmap, without touching the replay window,
// and answer each packet with a RecvError, as inline receive does, without decrypting the replay again.
func TestFlowStagedRXRecvError(t *testing.T) {
for _, sc := range receivePaths() {
t.Run(stagedName(sc), func(t *testing.T) {
sender, receiver := newFlowTestPair(t, noise.CipherChaChaPoly, sc)
receiver.f.messageMetrics = newMessageMetrics()
receiver.f.acceptRecvErrorConfig = recvErrorAlways
receiver.f.sendRecvErrorConfig = recvErrorAlways
batches, want := flowTestBatches(1, 1, 1, 33)
wire := wireFor(t, sender, batches)
rxc := newRxContext(receiver.f, 0)
receiver.f.readOutsidePackets(ViaSender{UdpAddr: flowTestUnder}, append([]byte(nil), wire[0]...), rxc)
receiver.f.flushOutside(rxc)
h := &header.H{}
require.NoError(t, h.Parse(wire[0]))
replay := h.MessageCounter
var decrypts atomic.Int64
delayCrypto(receiver, func(n uint64) {
if n == replay {
decrypts.Add(1)
}
})
ctl := header.Encode(make([]byte, header.Len), header.Version, header.RecvError, 0, receiver.hostinfo.remoteIndexId, 0)
conn := &rxConn{wire: append([][]byte{ctl}, wire...), batchLen: len(wire) + 1}
receiver.receive(conn)
require.Nil(t, receiver.f.hostMap.QueryIndex(receiver.hostinfo.localIndexId))
require.Equal(t, want[:1], receiver.tun.segments(t))
require.Zero(t, decrypts.Load(), "known replays must not be decrypted again")
replies := conn.captured()
require.Len(t, replies, len(wire))
for i, reply := range replies {
require.NoError(t, h.Parse(reply))
require.Equal(t, header.RecvError, h.Type)
require.NoError(t, h.Parse(wire[i]))
require.True(t, i == 0 || receiver.hostinfo.ConnectionState.window.Check(nil, h.MessageCounter), "dropped data must not update replay state")
}
})
}
}
// TestFlowStagedRXReplacedTunnel classifies a data packet, then a close and a new handshake replace its tunnel at the
// same index before the writer commits it, as when the listener runs ahead: it must be dropped untouched.
func TestFlowStagedRXReplacedTunnel(t *testing.T) {
sender, receiver := newFlowTestPair(t, noise.CipherChaChaPoly, stagedOn(2))
receiver.f.messageMetrics = newMessageMetrics()
batches, _ := flowTestBatches(1, 1, 1, 1)
wire := wireFor(t, sender, batches)
closePacket := sendControl(sender, header.CloseTunnel, 0)
p := &stagedRx{f: receiver.f, h: &header.H{}, hostmapCache: map[uint32]*HostInfo{}}
item := rxItem{packet: wire[0], via: flowTestUnder}
p.classify(&item)
require.NotNil(t, item.ci)
rxc := newRxContext(receiver.f, 0)
p.process(&rxBatch{items: []rxItem{{packet: closePacket, via: flowTestUnder}}}, rxc)
require.Nil(t, receiver.f.hostMap.QueryIndex(receiver.hostinfo.localIndexId))
_, replacement := newFlowTestPair(t, noise.CipherChaChaPoly, stagedOn(2))
receiver.f.hostMap.Lock()
receiver.f.hostMap.unlockedAddHostInfo(replacement.hostinfo, receiver.f)
receiver.f.hostMap.Unlock()
p.process(&rxBatch{items: []rxItem{item}}, rxc)
require.Empty(t, receiver.tun.writes)
require.True(t, item.ci.window.Check(nil, item.counter))
require.True(t, replacement.hostinfo.ConnectionState.window.Check(nil, item.counter))
}
// TestFlowStagedRXRealSocket exercises buffer handoff through the real Linux UDP receive loop.
func TestFlowStagedRXRealSocket(t *testing.T) {
defer goleak.VerifyNone(t, goleak.IgnoreCurrent())
sender, receiver := newFlowTestPair(t, noise.CipherChaChaPoly, stagedOn(3))
batches, want := flowTestBatches(60, 4, 1, 8)
wire := wireFor(t, sender, batches)
l := receiver.f.l
conn, err := udp.NewListener(l, udp.Settings{Listen: netip.MustParseAddrPort("127.0.0.1:0"), Batch: 16, Offloads: true})
require.NoError(t, err)
addr, err := conn.LocalAddr()
require.NoError(t, err)
out, err := udp.NewListener(l, udp.Settings{Listen: netip.MustParseAddrPort("127.0.0.1:0"), Batch: 16, Offloads: true})
require.NoError(t, err)
defer out.Close()
// The sender's address is the tunnel's remote, so no roaming
from, err := out.LocalAddr()
require.NoError(t, err)
receiver.hostinfo.remote.Store(&from)
done := make(chan struct{})
go func() { receiver.receive(conn); close(done) }()
// Send in bursts small enough for the default socket buffer
for off := 0; off < len(wire); off += 32 {
end := min(off+32, len(wire))
addrs := make([]netip.AddrPort, end-off)
for i := range addrs {
addrs[i] = addr
}
_, err := out.WriteBatch(wire[off:end], addrs)
require.NoError(t, err)
require.Eventually(t, func() bool { return len(receiver.tun.segments(t)) >= end }, 5*time.Second, 100*time.Microsecond)
}
receiver.f.closed.Store(true)
require.NoError(t, conn.Close())
<-done
require.Equal(t, want, receiver.tun.segments(t))
}
// TestFlowStagedRXCloseFlushesPartial: packets the listener holds in a batch it never got to end when the conn fails
// are still committed, in order, on a live interface.
func TestFlowStagedRXCloseFlushesPartial(t *testing.T) {
defer goleak.VerifyNone(t, goleak.IgnoreCurrent())
sender, receiver := newFlowTestPair(t, noise.CipherChaChaPoly, stagedOn(2))
batches, want := flowTestBatches(11, 4, 1, 8)
wire := wireFor(t, sender, batches)
p := newStagedRx(receiver.f, 0, newRxContext(receiver.f, 0))
for i, packet := range wire {
p.deliver(flowTestUnder, packet)
if (i+1)%64 == 0 {
p.endBatch()
}
}
p.close()
require.Equal(t, want, receiver.tun.segments(t))
}
// TestFlowStagedRXInlineBelow: small idle batches stay on the listener, larger batches still use the ordered writer.
func TestFlowStagedRXInlineBelow(t *testing.T) {
defer goleak.VerifyNone(t, goleak.IgnoreCurrent())
sc := adaptive(3)
sc.inlineBelow = 16
sender, receiver := newFlowTestPair(t, noise.CipherChaChaPoly, sc)
batches, want := flowTestBatches(40, 4, 1, 16)
wire := wireFor(t, sender, batches)
inline := metrics.GetOrRegisterCounter("flow.rx.inline", nil)
inline0, rx0 := inline.Count(), rxBatches.Count()
receiver.receive(&rxConn{wire: wire, sizes: []int{8, 8, 8, 128, 128, 8, 8, 128, 4, 128}})
require.Equal(t, want, receiver.tun.segments(t))
require.Positive(t, inline.Count()-inline0)
require.Positive(t, rxBatches.Count()-rx0)
}
+536
View File
@@ -0,0 +1,536 @@
//go:build linux && !android && !e2e_testing
package nebula
import (
"encoding/binary"
"io"
"math"
"net/netip"
"os"
"sync"
"sync/atomic"
"testing"
"time"
"github.com/flynn/noise"
"github.com/gaissmai/bart"
"github.com/rcrowley/go-metrics"
"github.com/slackhq/nebula/cert"
"github.com/slackhq/nebula/config"
"github.com/slackhq/nebula/firewall"
"github.com/slackhq/nebula/header"
"github.com/slackhq/nebula/iputil"
"github.com/slackhq/nebula/noiseutil"
"github.com/slackhq/nebula/overlay/batch"
"github.com/slackhq/nebula/overlay/tio"
"github.com/slackhq/nebula/test"
"github.com/slackhq/nebula/udp"
"github.com/stretchr/testify/require"
"go.uber.org/goleak"
)
// flowTestMSS is the segment payload size of the synthetic TSO superpackets.
const flowTestMSS = 1200
var (
flowTestLocal = netip.MustParseAddr("10.0.0.1")
flowTestRemote = netip.MustParseAddr("10.0.0.2")
flowTestUnder = netip.MustParseAddrPort("192.0.2.2:4242")
)
// flowTCPSuperpacket builds an IPv4/TCP TSO superpacket from local to remote carrying segs segments. Segment i's
// payload starts with the flow id, the superpacket seq and i, so a receiver can check what it got and in which order.
func flowTCPSuperpacket(flow uint16, seq uint32, segs int) tio.Packet {
const hdr = 40
pay := segs * flowTestMSS
b := make([]byte, hdr+pay)
b[0] = 0x45
binary.BigEndian.PutUint16(b[2:4], uint16(min(hdr+pay, 65535)))
b[8] = 64
b[9] = iputil.IPProtocolTCP
copy(b[12:16], flowTestLocal.AsSlice())
copy(b[16:20], flowTestRemote.AsSlice())
binary.BigEndian.PutUint16(b[20:22], 10000+flow)
binary.BigEndian.PutUint16(b[22:24], 80)
binary.BigEndian.PutUint32(b[24:28], seq*uint32(pay))
b[32] = 0x50
b[33] = 0x10 // ACK
binary.BigEndian.PutUint16(b[34:36], 65535)
for i := range segs {
p := b[hdr+i*flowTestMSS:]
binary.BigEndian.PutUint16(p[0:2], flow)
binary.BigEndian.PutUint32(p[2:6], seq)
binary.BigEndian.PutUint16(p[6:8], uint16(i))
}
if segs == 1 {
return tio.Packet{Bytes: b}
}
return tio.Packet{Bytes: b, GSO: tio.GSOInfo{Size: flowTestMSS, HdrLen: hdr, CsumStart: 20, Proto: tio.GSOProtoTCP}}
}
// decodedSeg identifies one segment by the marker flowTCPSuperpacket put in its payload.
type decodedSeg struct {
flow uint16
seq uint32
idx uint16
}
func decodeSeg(p []byte) decodedSeg {
return decodedSeg{flow: binary.BigEndian.Uint16(p[0:2]), seq: binary.BigEndian.Uint32(p[2:6]), idx: binary.BigEndian.Uint16(p[6:8])}
}
// flowTestBatches builds n reads of per superpackets of segs segments, across flows interleaved flows, and the
// segments they carry in order.
func flowTestBatches(n, per, flows, segs int) ([][]tio.Packet, []decodedSeg) {
var batches [][]tio.Packet
var want []decodedSeg
seq := make([]uint32, flows)
for range n {
var b []tio.Packet
for j := range per {
flow := uint16(j % flows)
b = append(b, flowTCPSuperpacket(flow, seq[flow], segs))
for s := range segs {
want = append(want, decodedSeg{flow: flow, seq: seq[flow], idx: uint16(s)})
}
seq[flow]++
}
batches = append(batches, b)
}
return batches, want
}
// flowTestPeer is one end of a tunnel: the interface, the hostinfo for the other end, and its capture points.
type flowTestPeer struct {
f *Interface
hostinfo *HostInfo
conn *flowCaptureConn
tun *flowTunCapture
}
// newFlowTestPair builds two interfaces joined by one real tunnel (keys from an actual handshake). sender sends from
// flowTestLocal to flowTestRemote, receiver is the far side.
func newFlowTestPair(t testing.TB, cipher noise.CipherFunc, sc stagedConfig) (sender, receiver *flowTestPeer) {
t.Helper()
initR, respR := runTestHandshakeWith(t, cipher)
sci, err := newConnectionStateFromResult(initR)
require.NoError(t, err)
rci, err := newConnectionStateFromResult(respR)
require.NoError(t, err)
sender = newFlowTestPeer(t, flowTestLocal, flowTestRemote, sci, 100, 200)
receiver = newFlowTestPeer(t, flowTestRemote, flowTestLocal, rci, 200, 100)
sender.f.staged, receiver.f.staged = sc, sc
return sender, receiver
}
func newFlowTestPeer(t testing.TB, me, them netip.Addr, ci *ConnectionState, localIdx, remoteIdx uint32) *flowTestPeer {
l := test.NewLogger()
hm := newHostMap(l)
hm.preferredRanges.Store(&[]netip.Prefix{})
myNets, myAddrs := &bart.Lite{}, &bart.Lite{}
myNets.Insert(netip.PrefixFrom(me, 24))
myAddrs.Insert(netip.PrefixFrom(me, 32))
myCert := &dummyCert{version: cert.Version1, networks: []netip.Prefix{netip.PrefixFrom(me, 24)}}
theirCert := &dummyCert{version: cert.Version1, networks: []netip.Prefix{netip.PrefixFrom(them, 24)}, name: "peer"}
ci.peerCert = &cert.CachedCertificate{Certificate: theirCert, InvertedGroups: map[string]struct{}{}}
fw := NewFirewall(l, time.Minute, time.Minute, time.Minute, myCert)
require.NoError(t, fw.AddRule(false, firewall.ProtoAny, 0, 0, []string{"any"}, "", "", "", "", ""))
require.NoError(t, fw.AddRule(true, firewall.ProtoAny, 0, 0, []string{"any"}, "", "", "", "", ""))
conn, tun := &flowCaptureConn{}, &flowTunCapture{}
lh := newTestLighthouse()
lh.remoteAllowList.Store(&RemoteAllowList{})
f := &Interface{
hostMap: hm,
outside: conn,
firewall: fw,
lightHouse: lh,
pki: &PKI{},
myVpnNetworksTable: myNets,
myVpnAddrsTable: myAddrs,
routines: 1,
writers: []udp.Conn{conn},
messageMetrics: &MessageMetrics{txExhausted: metrics.NewCounter()},
metricTxDropped: metrics.NilCounter{},
l: l,
}
f.ctx = t.Context()
f.pki.caPool.Store(cert.NewCAPool())
// Never promote or requery, those would put extra test packets on the wire
f.tryPromoteEvery.Store(math.MaxUint32)
f.reQueryEvery.Store(math.MaxUint32)
f.batchers = []*batch.MultiCoalescer{batch.NewMultiCoalescer(tun, l)}
f.connectionManager = &connectionManager{
intf: f,
relayUsed: map[uint32]struct{}{},
relayUsedLock: &sync.RWMutex{},
trafficTimer: NewLockingTimerWheel[uint32](time.Second, time.Minute),
}
f.handshakeManager = NewHandshakeManager(l, hm, lh, conn, defaultHandshakeConfig)
f.handshakeManager.f = f
hostinfo := &HostInfo{
ConnectionState: ci,
vpnAddrs: []netip.Addr{them},
localIndexId: localIdx,
remoteIndexId: remoteIdx,
relayState: RelayState{relayForByAddr: map[netip.Addr]*Relay{}, relayForByIdx: map[uint32]*Relay{}},
}
hostinfo.remote.Store(&flowTestUnder)
hostinfo.buildNetworks(myNets, theirCert)
hm.unlockedAddHostInfo(hostinfo, f)
return &flowTestPeer{f: f, hostinfo: hostinfo, conn: conn, tun: tun}
}
// flowCaptureConn records every packet sent, in order, as copies.
type flowCaptureConn struct {
udp.NoopConn
mu sync.Mutex
pkts [][]byte
addrs []netip.AddrPort
// delay, when set, slows every WriteBatch down so batches pile up in flight
delay time.Duration
}
func (c *flowCaptureConn) WriteBatch(bufs [][]byte, addrs []netip.AddrPort) (int, error) {
time.Sleep(c.delay)
c.mu.Lock()
defer c.mu.Unlock()
for i, b := range bufs {
c.pkts = append(c.pkts, append([]byte(nil), b...))
c.addrs = append(c.addrs, addrs[i])
}
return len(bufs), nil
}
func (c *flowCaptureConn) WriteTo(b []byte, addr netip.AddrPort) error {
_, err := c.WriteBatch([][]byte{b}, []netip.AddrPort{addr})
return err
}
func (c *flowCaptureConn) captured() [][]byte {
c.mu.Lock()
defer c.mu.Unlock()
return append([][]byte(nil), c.pkts...)
}
// flowTunCapture is a tun queue that records every plaintext write.
type flowTunCapture struct {
mu sync.Mutex
writes [][]byte
// delay, when set, slows every write down
delay time.Duration
}
func (c *flowTunCapture) Read() ([]tio.Packet, error) { return nil, io.EOF }
func (c *flowTunCapture) Close() error { return nil }
func (c *flowTunCapture) Write(b []byte) (int, error) {
time.Sleep(c.delay)
c.mu.Lock()
defer c.mu.Unlock()
c.writes = append(c.writes, append([]byte(nil), b...))
return len(b), nil
}
// segments decodes what reached the tun. The coalescer may have merged segments back into superpackets, so this
// walks each payload in MSS steps.
func (c *flowTunCapture) segments(t testing.TB) []decodedSeg {
t.Helper()
c.mu.Lock()
defer c.mu.Unlock()
var out []decodedSeg
for _, w := range c.writes {
pay := w[40:]
require.Zero(t, len(pay)%flowTestMSS, "tun write payload %d bytes", len(pay))
for off := 0; off < len(pay); off += flowTestMSS {
out = append(out, decodeSeg(pay[off:]))
}
}
return out
}
// decryptWire checks every wire packet decrypts on the receiver, in order, with strictly increasing counters, and
// returns what each one carried. It uses its own replay window and copies, so the wire can still be fed to the
// receiver afterwards.
func decryptWire(t testing.TB, receiver *flowTestPeer, wire [][]byte) []decodedSeg {
t.Helper()
peer := receiver.hostinfo.ConnectionState
ci := &ConnectionState{dKey: peer.dKey, window: NewBits(peer.window.length)}
nb := make([]byte, 12)
var last uint64
out := make([]decodedSeg, 0, len(wire))
for i, pkt := range wire {
h := &header.H{}
require.NoError(t, h.Parse(pkt))
require.Equal(t, header.Message, h.Type)
require.Equal(t, receiver.hostinfo.localIndexId, h.RemoteIndex)
require.Greater(t, h.MessageCounter, last, "wire packet %d: counter %d after %d", i, h.MessageCounter, last)
last = h.MessageCounter
plain, err := ci.Decrypt(receiver.f.l, h.MessageCounter, append([]byte(nil), pkt...), nb)
require.NoError(t, err, "wire packet %d", i)
out = append(out, decodeSeg(plain[40:]))
}
return out
}
// flowBatchQueue is a handoffQueue that hands out scripted Read batches, then fails with io.EOF. Every batch is copied
// into the current receive buffer, so a test sees the buffer ownership the Offload queue has.
type flowBatchQueue struct {
batches [][]tio.Packet
rxBuf []byte
out []tio.Packet
closed chan struct{}
// reads counts the batches handed out
reads atomic.Int64
}
func newFlowBatchQueue(batches [][]tio.Packet) *flowBatchQueue {
return &flowBatchQueue{batches: batches, rxBuf: make([]byte, 8*65536), closed: make(chan struct{})}
}
func (q *flowBatchQueue) Read() ([]tio.Packet, error) {
select {
case <-q.closed:
return nil, os.ErrClosed
default:
}
n := int(q.reads.Load())
if n == len(q.batches) {
return nil, io.EOF
}
q.out = q.out[:0]
off := 0
for _, p := range q.batches[n] {
l := copy(q.rxBuf[off:], p.Bytes)
q.out = append(q.out, tio.Packet{Bytes: q.rxBuf[off : off+l : off+l], GSO: p.GSO})
off += l
}
q.reads.Add(1)
return q.out, nil
}
func (q *flowBatchQueue) SwapRxBuf(buf []byte) []byte {
if buf == nil {
buf = make([]byte, len(q.rxBuf))
}
old := q.rxBuf
q.rxBuf = buf
// Scribble over the buffer we are handed, a staged batch that still pointed into it would be corrupted
for i := range buf {
buf[i] = 0xa5
}
return old
}
func (q *flowBatchQueue) Write(b []byte) (int, error) { return len(b), nil }
func (q *flowBatchQueue) Close() error { close(q.closed); return nil }
// delayedCipher changes scheduling through the real cipher interface, only in tests.
type delayedCipher struct {
noiseutil.CipherState
before func(uint64)
}
func (c delayedCipher) EncryptDanger(out, ad, plain []byte, n uint64, nb []byte) ([]byte, error) {
c.before(n)
return c.CipherState.EncryptDanger(out, ad, plain, n, nb)
}
func (c delayedCipher) DecryptDanger(out, ad, ciphertext []byte, n uint64, nb []byte) ([]byte, error) {
c.before(n)
return c.CipherState.DecryptDanger(out, ad, ciphertext, n, nb)
}
func delayCrypto(peer *flowTestPeer, before func(uint64)) {
ci := peer.hostinfo.ConnectionState
ci.eKey = delayedCipher{ci.eKey, before}
ci.dKey = delayedCipher{ci.dKey, before}
}
// stagedOn enables staging with n workers.
func stagedOn(n int) stagedConfig {
return stagedConfig{workers: n, tx: true, rx: true, txSlots: stagedTxSlots, rxSlots: 6}
}
// adaptive is staging with the inline threshold and gate hold parseStagedConfig sets.
func adaptive(n int) stagedConfig {
return stagedConfig{workers: n, tx: true, rx: true, inlineBelow: 256, gateHold: stagedGateHold,
txSlots: stagedTxSlots, rxSlots: 6}
}
func stagedName(sc stagedConfig) string {
switch {
case sc.workers == 0:
return "inline"
case sc.inlineBelow > 0:
return "adaptive"
default:
return "staged"
}
}
// send takes one read through the pipeline, as run does.
func (p *stagedTx) send(pkts []tio.Packet) {
p.handle(pkts, &firewall.ParsedPacket{}, make([]byte, mtu), nil)
}
// drain waits until every batch p has in flight is on the wire.
func (p *stagedTx) drain() {
for p.inFlight > 0 {
p.release(<-p.returned)
}
}
// TestFlowStagedFallback: a tun queue that cannot hand off its buffer, or a conn that cannot hand off its batches,
// keeps that direction on the inline path.
func TestFlowStagedFallback(t *testing.T) {
defer goleak.VerifyNone(t, goleak.IgnoreCurrent())
sender, receiver := newFlowTestPair(t, noise.CipherChaChaPoly, stagedOn(3))
batches, want := flowTestBatches(10, 2, 1, 4)
tx := metrics.GetOrRegisterCounter("flow.tx.batches", nil)
tx0, rx0 := tx.Count(), rxBatches.Count()
sender.f.listenIn(plainQueue{newFlowBatchQueue(batches)}, 0)
wire := sender.conn.captured()
require.Equal(t, want, decryptWire(t, receiver, wire))
require.Equal(t, tx0, tx.Count())
receiver.receive(plainConn{&rxConn{wire: wire, batchLen: 16}})
require.Equal(t, want, receiver.tun.segments(t))
require.Equal(t, rx0, rxBatches.Count())
}
// plainQueue and plainConn hide SwapRxBuf and ListenOutHandoff, so they cannot hand off their batches.
type plainQueue struct{ tio.Queue }
// wireFor produces the wire packets the sender emits for batches, inline.
func wireFor(t testing.TB, sender *flowTestPeer, batches [][]tio.Packet) [][]byte {
t.Helper()
sc := sender.f.staged
sender.f.staged = stagedConfig{}
sender.f.listenIn(newFlowBatchQueue(batches), 0)
sender.f.staged = sc
wire := sender.conn.captured()
sender.conn.pkts, sender.conn.addrs = nil, nil
return wire
}
// rxConn plays wire back to listenOut through the buffer handoff, in batches of batchLen or of the scripted sizes
// (the last one repeating), and captures what is sent back. Every buffer handed back is scribbled over before it is
// read into, so a stage still using one shows corruption. from, when set, picks each packet's source address by its
// index in wire.
type rxConn struct {
flowCaptureConn
wire [][]byte
batchLen int
sizes []int
from func(i int) netip.AddrPort
swaps int
}
func (c *rxConn) ListenOut(r udp.EncReader, flush func()) error {
return c.ListenOutHandoff(r, func(bufs [][]byte) [][]byte {
flush()
return bufs
})
}
func (c *rxConn) ListenOutHandoff(r udp.EncReader, handoff func(bufs [][]byte) [][]byte) error {
n := c.batchLen
for _, size := range c.sizes {
n = max(n, size)
}
bufs := make([][]byte, n)
for i := range bufs {
bufs[i] = make([]byte, udp.MTU)
}
for off, k := 0, 0; off < len(c.wire); k++ {
size := c.batchLen
if len(c.sizes) > 0 {
size = c.sizes[min(k, len(c.sizes)-1)]
}
end := min(off+size, len(c.wire))
for i, p := range c.wire[off:end] {
n := copy(bufs[i], p)
from := flowTestUnder
if c.from != nil {
from = c.from(off + i)
}
r(from, bufs[i][:n:n])
}
next := handoff(bufs)
if len(next) != len(bufs) {
panic("handoff returned the wrong number of buffers")
}
bufs = next
for _, b := range bufs {
for j := range b[:udp.MTU] {
b[j] = 0x5a
}
}
c.swaps++
off = end
}
return os.ErrClosed
}
type plainConn struct{ udp.Conn }
var rxBatches = metrics.GetOrRegisterCounter("flow.rx.batches", nil)
// receive runs the peer's listenOut over conn until conn runs out.
func (p *flowTestPeer) receive(conn udp.Conn) {
p.f.writers = []udp.Conn{conn}
p.f.outside = conn
p.f.listenOut(0)
}
// TestFlowStagedFirewallParity: both paths apply the same outbound and inbound policy. An authenticated inbound
// denial still consumes its replay counter, exactly as inline Decrypt does.
func TestFlowStagedFirewallParity(t *testing.T) {
for _, sc := range []stagedConfig{{}, stagedOn(2)} {
t.Run(stagedName(sc), func(t *testing.T) {
batches, _ := flowTestBatches(4, 3, 1, 8)
sender, _ := newFlowTestPair(t, noise.CipherChaChaPoly, sc)
sender.f.firewall.OutRules = newFirewallTable()
sender.f.listenIn(newFlowBatchQueue(batches), 0)
require.Empty(t, sender.conn.captured())
sender, receiver := newFlowTestPair(t, noise.CipherChaChaPoly, sc)
wire := wireFor(t, sender, batches)
receiver.f.firewall.InRules = newFirewallTable()
receiver.receive(&rxConn{wire: wire, batchLen: 64})
require.Empty(t, receiver.tun.writes)
for _, pkt := range wire {
h := &header.H{}
require.NoError(t, h.Parse(pkt))
require.False(t, receiver.hostinfo.ConnectionState.window.Check(receiver.f.l, h.MessageCounter))
}
})
}
}
// TestFlowStagedCipherFallback runs the parsed configuration with the real AES cipher: transmit falls back to inline
// when the build needs nonce-ordered encryption (BoringCrypto, FIPS), receive decryption stays staged.
func TestFlowStagedCipherFallback(t *testing.T) {
l := test.NewLogger()
c := config.NewC(l)
c.Settings = map[string]any{"tun": map[string]any{"staged": map[string]any{"workers": 2}}}
sender, receiver := newFlowTestPair(t, noiseutil.CipherAESGCM, parseStagedConfig(c, l))
require.Equal(t, !noiseutil.EncryptLockNeeded, sender.f.staged.tx)
require.True(t, sender.f.staged.rx)
batches, want := flowTestBatches(4, 8, 1, 45)
tx := metrics.GetOrRegisterCounter("flow.tx.batches", nil)
tx0, rx0 := tx.Count(), rxBatches.Count()
sender.f.listenIn(newFlowBatchQueue(batches), 0)
if noiseutil.EncryptLockNeeded {
require.Equal(t, tx0, tx.Count())
}
receiver.receive(&rxConn{wire: sender.conn.captured(), batchLen: 512})
require.Greater(t, rxBatches.Count(), rx0)
require.Equal(t, want, receiver.tun.segments(t))
}
+583
View File
@@ -0,0 +1,583 @@
package nebula
import (
"errors"
"net/netip"
"github.com/rcrowley/go-metrics"
"github.com/slackhq/nebula/firewall"
"github.com/slackhq/nebula/header"
"github.com/slackhq/nebula/noiseutil"
"github.com/slackhq/nebula/overlay/batch"
"github.com/slackhq/nebula/overlay/tio"
"github.com/slackhq/nebula/udp"
)
var errFlowSegmentOverrun = errors.New("superpacket has more segments than counters reserved for it")
// txItem is one firewall-approved inside packet (or superpacket) with everything needed to encrypt it. A nonzero
// counter is the first of the segs counters reserved for it on ci, relayCounter the same on the relay tunnel when
// relayHI is set. Zero counters are allocated per segment while encrypting, as inline sends do.
type txItem struct {
pkt tio.Packet
hostinfo *HostInfo
ci *ConnectionState
remote netip.AddrPort
segs uint64
counter uint64
relayHI *HostInfo
relay *Relay
relayCounter uint64
}
// prepareTxItem does the per-packet work sendInsideMessage does before it encrypts, and resolves where the packet goes.
func (f *Interface) prepareTxItem(it *txItem, hostinfo *HostInfo, pkt tio.Packet) bool {
ci := hostinfo.ConnectionState
if ci.eKey == nil {
return false
}
f.recordOutbound(hostinfo)
it.pkt, it.hostinfo, it.ci = pkt, hostinfo, ci
it.remote = hostinfo.GetRemote()
if it.remote.IsValid() {
return true
}
it.relayHI, it.relay = f.findRelay(hostinfo)
if it.relayHI == nil || it.relay == nil {
return false
}
it.remote = it.relayHI.GetRemote()
return true
}
// encryptTxItem segments and encrypts it into sb, for inline and staged sends alike.
func (f *Interface) encryptTxItem(it *txItem, nb []byte, sb *batch.SendBatch) {
reserved := it.counter != 0
c, rc, end := it.counter, it.relayCounter, it.counter+it.segs
err := tio.SegmentSuperpacket(it.pkt, func(seg []byte) error {
if reserved && c >= end {
// More segments than counters reserved for them, never encrypt past the reservation
return errFlowSegmentOverrun
}
if it.relayHI == nil {
// header + plaintext + AEAD tag (16 bytes for both AES-GCM and ChaCha20-Poly1305)
if out := f.encryptTxSegment(it, c, seg, nb, sb.Reserve(header.Len+len(seg)+16)); out != nil {
sb.Commit(out, it.remote)
}
} else {
f.encryptTxSegmentVia(it, c, rc, seg, nb, sb)
}
if reserved {
c++
rc++
}
return nil
})
if err != nil {
it.hostinfo.logger(f.l).Error("Failed to segment superpacket for send", "error", err)
}
}
// encryptTxSegment encrypts one segment into out with counter c, or with the next counter of the tunnel when c is
// zero. It returns nil when encryption failed, which is already logged.
func (f *Interface) encryptTxSegment(it *txItem, c uint64, seg, nb, out []byte) []byte {
if c != 0 {
// Reserved counters are unique, so the encryption needs no lock
return f.encryptMessage(header.Message, 0, it.hostinfo, it.ci, c, seg, nb, out, it.remote)
}
if noiseutil.EncryptLockNeeded {
it.ci.writeLock.Lock()
}
c = it.ci.messageCounter.Add(1)
out = f.encryptMessage(header.Message, 0, it.hostinfo, it.ci, c, seg, nb, out, it.remote)
if noiseutil.EncryptLockNeeded {
it.ci.writeLock.Unlock()
}
return out
}
// encryptTxSegmentVia encrypts one segment for the relayed tunnel, then wraps it for the relay with counter rc, both
// allocated on demand when zero like encryptTxSegment does.
func (f *Interface) encryptTxSegmentVia(it *txItem, c, rc uint64, seg, nb []byte, sb *batch.SendBatch) {
//relay header + header + plaintext + AEAD tag + relay tag
scratch := sb.Reserve(len(seg) + header.MaxOverhead)
out := f.encryptTxSegment(it, c, seg, nb, scratch[header.Len:])
if out == nil {
return
}
toSend, err := f.prepareSendVia(it.relayHI, it.relay, out, nb, scratch, true, rc)
if err != nil {
return
}
remote := it.remote
if rc == 0 {
// Unreserved sends follow the relay's current remote, like sendNoMetrics
remote = it.relayHI.GetRemote()
}
sb.Commit(toSend, remote)
}
// txTunnel accumulates one tunnel's counter needs across a batch so the batch reserves them with one atomic add.
type txTunnel struct {
ci *ConnectionState
hostinfo *HostInfo
n uint64
base uint64
exhausted bool
}
// txReserver turns one tun read into txItems with message counters reserved for them. Only the reader goroutine
// collects and reserves counters.
type txReserver struct {
f *Interface
tunnels []txTunnel
owner uint64
// The staged reader separates relay data before reserving direct work. A nil pointer collects both paths.
inlineRelays *[]txItem
}
// collect runs the filter over pkts and appends the sendable ones to items, tallying each tunnel's counter needs.
func (r *txReserver) collect(items []txItem, pkts []tio.Packet, fwPacket *firewall.ParsedPacket, rejectBuf []byte, q int, localCache firewall.ConntrackCache) []txItem {
f := r.f
r.tunnels = r.tunnels[:0]
for _, pkt := range pkts {
hostinfo := f.filterInsidePacket(pkt, fwPacket, rejectBuf, q, localCache)
if hostinfo == nil {
continue
}
var it txItem
if !f.prepareTxItem(&it, hostinfo, pkt) {
continue
}
it.segs = uint64(pkt.SegmentCount())
if it.relayHI != nil {
// The relay bookkeeping inline sends do per segment in prepareSendVia, once per item
f.connectionManager.OutNoRebind(it.relayHI)
f.connectionManager.RelayUsed(it.relay.LocalIndex)
if r.inlineRelays != nil {
*r.inlineRelays = append(*r.inlineRelays, it)
continue
}
it.relayCounter = r.need(it.relayHI, it.relayHI.ConnectionState, it.segs)
}
it.counter = r.need(it.hostinfo, it.ci, it.segs)
items = append(items, it)
}
return items
}
// need adds n counters to ci's tally for this batch and returns the offset of the first one within it.
func (r *txReserver) need(hostinfo *HostInfo, ci *ConnectionState, n uint64) uint64 {
t := r.tunnel(ci)
if t == nil {
r.tunnels = append(r.tunnels, txTunnel{ci: ci, hostinfo: hostinfo})
t = &r.tunnels[len(r.tunnels)-1]
}
off := t.n
t.n += n
return off
}
// tunnel finds ci's tally, a batch rarely touches more than a couple of tunnels so a scan beats a map.
func (r *txReserver) tunnel(ci *ConnectionState) *txTunnel {
for i := range r.tunnels {
if r.tunnels[i].ci == ci {
return &r.tunnels[i]
}
}
return nil
}
// reserve takes the counters collect tallied and stamps them onto items, dropping the items of any tunnel whose
// counter is exhausted. It returns the items that are left.
func (r *txReserver) reserve(items []txItem) []txItem {
f := r.f
// One atomic add per tunnel reserves the whole batch's counters before any worker sees it, so counter order on a
// tunnel is dispatch order, which is the order the batches are flushed in. Reservation and the sender's order are
// both taken on the reader goroutine, so there is no window for another batch to slip in between.
for i := range r.tunnels {
t := &r.tunnels[i]
end := t.ci.messageCounter.Add(t.n)
t.base = end - t.n + 1
if end >= RejectAfterMessages {
t.ci.messageCounter.Store(RejectAfterMessages)
t.exhausted = true
f.messageMetrics.TxExhausted(int64(t.n))
if t.base <= RejectAfterMessages {
t.hostinfo.logger(f.l).Error("Dropping outbound packets, tunnel message counter is exhausted")
}
}
}
n := 0
for _, it := range items {
t := r.tunnel(it.ci)
if t.exhausted {
continue
}
it.counter += t.base
if it.relayHI != nil {
rt := r.tunnel(it.relayHI.ConnectionState)
if rt.exhausted {
continue
}
it.relayCounter += rt.base
}
items[n] = it
n++
}
clear(items[n:])
return items[:n]
}
// handoffQueue is a tun queue that can give up the buffer its last Read filled. SwapRxBuf(nil) allocates a
// correctly sized replacement; later swaps recycle the buffers handed back.
type handoffQueue interface {
tio.Queue
SwapRxBuf([]byte) []byte
}
// txSlot is one staged batch. The reader fills items, a worker encrypts them into sb and signals done, and the
// ordered sender flushes sb.
type txSlot struct {
f *Interface
items []txItem
// buf owns the queue receive buffer the items point into, swapped out at dispatch
buf []byte
sb *batch.SendBatch
done chan struct{}
// reservations hold shared tunnel credit until the flush, including for dropped counters
reservations []txTunnel
}
func (s *txSlot) run(nb []byte) {
for i := range s.items {
s.f.encryptTxItem(&s.items[i], nb, s.sb)
}
s.done <- struct{}{}
}
// stagedTx is the staged transmit pipeline of one tun reader. Everything but the workers and the sender runs on the
// reader goroutine.
type stagedTx struct {
txReserver
// Relay data always leaves on the reader, including small and oversized reads. Its independent reservation
// scratch keeps mixed reads from changing the direct pipeline's counters, gate or sender placement.
relayReserver txReserver
relaySlot txSlot
q int
cpu int // reader CPU, inline sends stay here
senderCPU int // -1 leaves the sender within its inherited affinity
queue handoffQueue
pool *flowPool
// sb and nb are the reader's own, for the sends it does itself
sb *batch.SendBatch
nb []byte
// free holds the reader's idle slots. A dispatched slot goes to the workers and, in the same order, to the
// sender on ordered; the sender gives it back on returned once it is on the wire.
free []*txSlot
ordered chan *txSlot
returned chan *txSlot
inFlight int
senderDone chan struct{}
// gateInline is the routine's transmit mode, gateStreak how many reads in a row wanted the other one
gateInline bool
gateStreak int
metricGateSwitches metrics.Counter
metricBatches metrics.Counter
metricInline metrics.Counter
}
// newStagedTx needs a queue that hands over whole read batches, the offload (TSO/USO) queue on linux. On any other
// queue a read is one packet, and staging it would cost a handoff per packet.
func newStagedTx(f *Interface, queue handoffQueue, q int) *stagedTx {
p := &stagedTx{
txReserver: txReserver{f: f, tunnels: make([]txTunnel, 0, 4), owner: txBudgetOwner(q)},
q: q,
senderCPU: -1,
queue: queue,
sb: batch.NewSendBatch(f.writers[q], batch.SendBatchCap, batch.SendBatchCap*(udp.MTU+32)),
nb: make([]byte, 12),
ordered: make(chan *txSlot, f.staged.txSlots),
returned: make(chan *txSlot, f.staged.txSlots),
senderDone: make(chan struct{}),
metricBatches: metrics.GetOrRegisterCounter("flow.tx.batches", nil),
metricInline: metrics.GetOrRegisterCounter("flow.tx.inline", nil),
// Starts inline, the pipeline is empty, unless the threshold never allows it
gateInline: f.staged.inlineBelow > 0,
metricGateSwitches: metrics.GetOrRegisterCounter("flow.tx.gate_switches", nil),
}
// Inline relay sends can share a tunnel with older direct work on this routine. They are not the ordered
// sender's sole owner, so they must not recycle credit around a stalled direct reservation.
p.relayReserver = txReserver{f: f, tunnels: make([]txTunnel, 0, 4)}
p.inlineRelays = &p.relaySlot.items
if f.pinThreads {
p.cpu = f.threadCPU(q)
// Only an explicit list pins the sender, and never onto its reader's CPU, where the two would serialise.
// Automatic placement by queue index can put a busy sender on a slow core; unpinned, the scheduler moves it.
if n := len(f.cpuAffinity); n > 0 && f.cpuAffinity[(q+1)%n] != p.cpu {
p.senderCPU = f.cpuAffinity[(q+1)%n]
}
}
p.pool = newFlowPool(f.staged.workers, f.staged.txSlots)
// Ciphertext adds per-segment headers and tags; the arena can grow for small segments.
buf := queue.SwapRxBuf(nil)
bufSize := len(buf)
for i := range f.staged.txSlots {
if i > 0 {
buf = make([]byte, bufSize)
}
p.free = append(p.free, &txSlot{
f: f,
buf: buf,
sb: batch.NewSendBatch(f.writers[q], 4*batch.SendBatchCap, bufSize+bufSize/4),
done: make(chan struct{}, 1),
})
}
go p.sender()
return p
}
// run is listenIn's loop with the staged pipeline: read, then hand each batch on, until the queue fails.
func (p *stagedTx) run(fwPacket *firewall.ParsedPacket, rejectBuf []byte, conntrackCache *firewall.ConntrackCacheTicker) error {
defer p.close()
if p.f.pinThreads {
p.f.pinThreadToCPU(p.q, p.cpu)
}
for {
pkts, err := p.queue.Read()
if err != nil {
return err
}
p.ready()
p.handle(pkts, fwPacket, rejectBuf, conntrackCache.Get())
}
}
// handle takes one tun read through the pipeline. It returns once the batch is queued, or sent when the reader sent
// it itself.
func (p *stagedTx) handle(pkts []tio.Packet, fwPacket *firewall.ParsedPacket, rejectBuf []byte, localCache firewall.ConntrackCache) {
p.ready()
inline := p.gate(p.small(pkts))
if inline && p.f.routines == 1 {
// With only one reader and an empty pipeline, no other staged reservation can be overtaken. Keep this common
// case inexpensive.
p.inlineSoleReader(pkts, fwPacket, rejectBuf, localCache)
return
}
slot := p.free[len(p.free)-1]
p.free = p.free[:len(p.free)-1]
items := p.collect(slot.items[:0], pkts, fwPacket, rejectBuf, p.q, localCache)
if len(p.relaySlot.items) != 0 {
p.sendRelays()
}
if len(items) == 0 {
slot.items = items
p.free = append(p.free, slot)
return
}
if p.oversized() {
p.metricInline.Inc(1)
p.sendLarge(&p.txReserver, items)
slot.items = items[:0]
p.free = append(p.free, slot)
return
}
if !p.waitBudget(&p.txReserver) {
clear(items)
slot.items = items[:0]
p.free = append(p.free, slot)
return
}
slot.reservations = append(slot.reservations[:0], p.tunnels...)
items = p.reserve(items)
slot.items = items
if len(items) == 0 {
slot.releaseBudget()
p.free = append(p.free, slot)
return
}
if inline {
p.inline(slot)
p.free = append(p.free, slot)
return
}
// The packets now live in the slot, and the queue reads into the slot's old buffer
slot.buf = p.queue.SwapRxBuf(slot.buf)
p.inFlight++
p.metricBatches.Inc(1)
// Counters were reserved above on this goroutine and the slot takes its place in the sender's order right here,
// before any other batch can, so the sender puts them on the wire in counter order.
p.ordered <- slot
p.pool.jobs <- slot
}
// sendRelays keeps relay data on one send path for the lifetime of this routine. The gate's software drain only
// waits for socket submission; switching CPUs can still overtake packets on another NIC queue. Direct data retains
// the existing gate and sender placement. Relay credit is still shared with all other users of both tunnels.
func (p *stagedTx) sendRelays() {
r, slot := &p.relayReserver, &p.relaySlot
r.tunnels = r.tunnels[:0]
for i := range slot.items {
it := &slot.items[i]
it.counter = r.need(it.hostinfo, it.ci, it.segs)
it.relayCounter = r.need(it.relayHI, it.relayHI.ConnectionState, it.segs)
}
if r.oversized() {
p.metricInline.Inc(1)
p.sendLarge(r, slot.items)
slot.items = slot.items[:0]
return
}
if !p.waitBudget(r) {
clear(slot.items)
slot.items = slot.items[:0]
return
}
slot.reservations = append(slot.reservations[:0], r.tunnels...)
slot.items = r.reserve(slot.items)
p.inline(slot)
}
// gate reports whether a read goes inline. Each routine holds one
// transmit mode, inline on the reader or fanout to the workers and the sender, until gateHold reads in a row want the
// other one, the last of which goes the new way. Choosing per read let small inline sends leave from the reader's CPU
// between staged ones leaving from the sender's, and the receiver's TCP saw them reordered. Going inline the reader
// first waits until everything in flight has been submitted to the socket and the sender is idle. This does not
// drain independent NIC queues; relay data therefore always uses the reader. Going to fanout nothing is in flight:
// inline sends finish before the reader moves on.
func (p *stagedTx) gate(small bool) bool {
if small == p.gateInline {
p.gateStreak = 0
return small
}
if p.gateStreak++; p.gateStreak < p.f.staged.gateHold {
return p.gateInline
}
p.gateInline, p.gateStreak = small, 0
p.metricGateSwitches.Inc(1)
if !small {
return false
}
for p.flushOldest() {
}
return true
}
// ready takes back every slot the sender has finished with, and waits for one when all of them are in flight.
func (p *stagedTx) ready() {
p.reap()
if len(p.free) == 0 {
p.release(<-p.returned)
}
}
// reap takes back every slot the sender has finished with, without waiting.
func (p *stagedTx) reap() {
for {
select {
case s := <-p.returned:
p.release(s)
default:
return
}
}
}
// flushOldest waits for the oldest batch in flight to reach the wire and takes its slot back. It reports false when
// nothing is in flight.
func (p *stagedTx) flushOldest() bool {
if p.inFlight == 0 {
return false
}
p.release(<-p.returned)
return true
}
func (p *stagedTx) release(s *txSlot) {
p.inFlight--
p.free = append(p.free, s)
}
// sender is the ordered send stage: it puts each batch on the wire once its worker is done, in dispatch order.
func (p *stagedTx) sender() {
defer close(p.senderDone)
if p.senderCPU >= 0 {
p.f.pinThreadToCPU(p.q, p.senderCPU)
}
for s := range p.ordered {
<-s.done
if p.f.closed.Load() {
// The sockets are gone, a flush would only log errors
s.sb.Reset()
} else {
p.f.flushSendBatch(s.sb, p.q)
}
s.releaseBudget()
clear(s.items)
s.items = s.items[:0]
p.returned <- s
}
}
// close sends everything still in flight, in order, and stops the sender and the workers.
func (p *stagedTx) close() {
close(p.ordered)
<-p.senderDone
p.pool.close()
}
// small counts segments against the inline threshold.
func (p *stagedTx) small(pkts []tio.Packet) bool {
below := uint64(p.f.staged.inlineBelow)
if below == 0 {
return false
}
var n uint64
for _, pkt := range pkts {
if n += uint64(pkt.SegmentCount()); n >= below {
return false
}
}
return true
}
// inline encrypts a budgeted batch on the reader, with no worker handoff or buffer swap. The local sender is idle,
// but other readers may hold reservations on these tunnels, so keep our credit until the flush completes.
func (p *stagedTx) inline(slot *txSlot) {
p.metricInline.Inc(1)
for i := range slot.items {
p.f.encryptTxItem(&slot.items[i], p.nb, p.sb)
if p.sb.Len() >= batch.SendBatchCap {
p.f.flushSendBatch(p.sb, p.q)
}
}
p.f.flushSendBatch(p.sb, p.q)
slot.releaseBudget()
clear(slot.items)
slot.items = slot.items[:0]
}
// inlineSoleReader needs no credit: the interface has no other tun reader and this reader has drained every
// reservation before taking the inline path.
func (p *stagedTx) inlineSoleReader(pkts []tio.Packet, fwPacket *firewall.ParsedPacket, rejectBuf []byte, localCache firewall.ConntrackCache) {
p.metricInline.Inc(1)
for _, pkt := range pkts {
p.f.consumeInsidePacket(pkt, fwPacket, p.nb, p.sb, rejectBuf, p.q, localCache)
if p.sb.Len() >= batch.SendBatchCap {
p.f.flushSendBatch(p.sb, p.q)
}
}
p.f.flushSendBatch(p.sb, p.q)
}
+231
View File
@@ -0,0 +1,231 @@
//go:build linux && !android && !e2e_testing
package nebula
import (
"fmt"
"net/netip"
"sync"
"time"
"os"
"os/exec"
"testing"
"github.com/slackhq/nebula/overlay/tio"
"github.com/flynn/noise"
"github.com/slackhq/nebula/header"
"github.com/slackhq/nebula/udp"
"github.com/slackhq/nebula/util"
"github.com/stretchr/testify/require"
)
// queuedWire models two CPU-selected NIC queues with independent completion: the reader's
// queue is congested, while another CPU's queue drains immediately. WriteBatch returning only
// means the kernel accepted the packets; draining staged slots does not drain a NIC queue.
// The sampled affinity makes the schedule deterministic without a real socket or NIC. An
// unpinned sender alternates between allowed CPUs, even if it happened not to in this run.
func (c *affinityConn) queuedWire(readerCPU int) [][]byte {
var slow, fast [][]byte
wire := c.captured()
off := 0
for i, n := range c.sizes {
mask := c.masks[i]
if mask.IsSet(readerCPU) && (mask.Count() == 1 || i%2 == 0) {
slow = append(slow, wire[off:off+n]...)
} else {
fast = append(fast, wire[off:off+n]...)
}
off += n
}
return append(fast, slow...)
}
// TestFlowStagedTXRelayQueuedWire reproduces reorder after successful, ordered socket
// submissions. Mixed reads switch the sticky gate with an empty software pipeline; relayed
// data must stay on the reader throughout, without moving the direct sender. Each routine owns a flow.
func TestFlowStagedTXRelayQueuedWire(t *testing.T) {
if os.Getenv("NEBULA_FLOW_RING_TEST") != "1" {
cmd := exec.Command(os.Args[0], "-test.run=^TestFlowStagedTXRelayQueuedWire$")
cmd.Env = append(os.Environ(), "NEBULA_FLOW_RING_TEST=1")
out, err := cmd.CombinedOutput()
require.NoError(t, err, "%s", out)
return
}
allowed, err := util.AllowedCPUs()
require.NoError(t, err)
if len(allowed) < 2 {
t.Skip("requires two allowed CPUs")
}
for _, mode := range []string{"gate", "always-staged", "oversized"} {
for _, explicit := range []bool{false, true} {
for _, routines := range []int{1, 2} {
for q := range routines {
t.Run(fmt.Sprintf("%s/explicit=%t/routines=%d/q=%d", mode, explicit, routines, q), func(t *testing.T) {
sc := gated(stagedGateHold)
if mode != "gate" {
sc.inlineBelow = 0
}
sender, receiver := newFlowTestPair(t, noise.CipherChaChaPoly, sc)
f := sender.f
f.pinThreads, f.routines = true, routines
if explicit {
f.cpuAffinity = allowed[:2]
}
_, relayHI, relayPeer := addTestRelay(t, sender, ReplayWindow)
conn := &affinityConn{}
f.writers = make([]udp.Conn, routines)
for i := range f.writers {
f.writers[i] = conn
}
shape := append(repeatBool(false, 2), repeatBool(true, stagedGateHold+2)...)
shape = append(shape, repeatBool(false, stagedGateHold+2)...)
if mode != "gate" {
shape = []bool{false, true, false, true}
}
reads, want := gateReads(shape...)
if mode == "oversized" {
// A deliberately tiny outer budget alone forces the oversized fallback.
relayHI.ConnectionState.window = NewBits(16)
}
queue := &affinityQueue{flowBatchQueue: newFlowBatchQueue(reads), conn: conn}
// Each Read waits for all previous socket submissions, making software drain
// irrelevant to the independently queued packets in queuedWire.
f.listenIn(queue, q)
unwrap := func(wire [][]byte) [][]byte {
inner := make([][]byte, 0, len(wire))
for _, pkt := range wire {
inner = append(inner, pkt[header.Len:len(pkt)-relayPeer.dKey.Overhead()])
}
return inner
}
require.Equal(t, want, decryptWire(t, receiver, unwrap(conn.captured())), "socket submission order")
require.Equal(t, want, decryptWire(t, receiver, unwrap(conn.queuedWire(f.threadCPU(q)))), "NIC queue completion order")
})
}
}
}
}
}
// Mixed reads must keep direct sends on the original staged sender, including when relay data is present.
func TestFlowStagedTXMixedPlacement(t *testing.T) {
if os.Getenv("NEBULA_FLOW_MIXED_TEST") != "1" {
cmd := exec.Command(os.Args[0], "-test.run=^TestFlowStagedTXMixedPlacement$")
cmd.Env = append(os.Environ(), "NEBULA_FLOW_MIXED_TEST=1")
out, err := cmd.CombinedOutput()
require.NoError(t, err, "%s", out)
return
}
allowed, err := util.AllowedCPUs()
require.NoError(t, err)
if len(allowed) < 2 {
t.Skip("requires two allowed CPUs")
}
for _, explicit := range []bool{false, true} {
t.Run(fmt.Sprintf("explicit=%t", explicit), func(t *testing.T) {
sender, receiver := newFlowTestPair(t, noise.CipherChaChaPoly, stagedOn(2))
_, _, relayPeer := addTestRelay(t, sender, ReplayWindow)
direct, directReceiver := newFlowTestPair(t, noise.CipherChaChaPoly, stagedOn(2))
directAddr := netip.MustParseAddr("10.0.0.4")
direct.hostinfo.vpnAddrs = []netip.Addr{directAddr}
f := sender.f
f.hostMap.Hosts[directAddr] = direct.hostinfo
f.pinThreads, f.routines = true, 2
sendCPU := -1
if explicit {
f.cpuAffinity = allowed[:2]
sendCPU = allowed[1]
}
conn := &affinityConn{}
f.writers = []udp.Conn{conn, conn}
var reads [][]tio.Packet
var wantRelay, wantDirect []decodedSeg
for seq := range uint32(6) {
r := flowTCPSuperpacket(0, seq, 3)
d := flowTCPSuperpacket(1, seq, 9)
copy(d.Bytes[16:20], directAddr.AsSlice())
reads = append(reads, []tio.Packet{r, d})
for i := range 3 {
wantRelay = append(wantRelay, decodedSeg{seq: seq, idx: uint16(i)})
}
for i := range 9 {
wantDirect = append(wantDirect, decodedSeg{flow: 1, seq: seq, idx: uint16(i)})
}
}
queue := &affinityQueue{flowBatchQueue: newFlowBatchQueue(reads), conn: conn}
f.listenIn(queue, 0)
wire := conn.captured()
var directWire, relayWire [][]byte
off := 0
for i, n := range conn.sizes {
for _, pkt := range wire[off : off+n] {
var h header.H
require.NoError(t, h.Parse(pkt))
cpu := sendCPU
if h.Subtype == header.MessageRelay {
cpu = f.threadCPU(0)
require.NoError(t, relayPeer.VerifyRelay(nil, h.MessageCounter, pkt, make([]byte, 12)))
relayWire = append(relayWire, pkt[header.Len:len(pkt)-relayPeer.dKey.Overhead()])
} else {
directWire = append(directWire, pkt)
}
requireFlowCPU(t, conn.masks[i:i+1], cpu, allowed)
}
off += n
}
require.Equal(t, wantDirect, decryptWire(t, directReceiver, directWire))
require.Equal(t, wantRelay, decryptWire(t, receiver, relayWire))
})
}
}
// A relayed batch shares its outer tunnel with older staged direct data on the SAME routine. Inline completion
// must not refund that direct sender's credit while its oldest reservation is stalled.
func TestFlowStagedTXRelaySharedBudget(t *testing.T) {
sender, _ := newFlowTestPair(t, noise.CipherChaChaPoly, stagedOn(2))
_, via, _ := addTestRelay(t, sender, ReplayWindow)
// Give the relay host the same ordinary peer metadata as a direct tunnel.
direct := newFlowTestPeer(t, flowTestLocal, via.vpnAddrs[0], via.ConnectionState, 300, 400)
via.buildNetworks(sender.f.myVpnNetworksTable, direct.hostinfo.ConnectionState.peerCert.Certificate)
via.remoteIndexId = direct.hostinfo.remoteIndexId
ci := via.ConnectionState
ci.window = NewBits(32)
start := ci.messageCounter.Load()
entered, unblock := make(chan struct{}), make(chan struct{})
var release sync.Once
delayCrypto(direct, func(n uint64) {
if n == start+1 {
close(entered)
<-unblock
}
})
p := newStagedTx(sender.f, newFlowBatchQueue(nil), 0)
defer p.close()
defer release.Do(func() { close(unblock) })
d := flowTCPSuperpacket(1, 0, 9)
copy(d.Bytes[16:20], via.vpnAddrs[0].AsSlice())
p.send([]tio.Packet{d})
select {
case <-entered:
case <-time.After(5 * time.Second):
t.Fatal("direct worker did not start")
}
for seq := range uint32(7) {
p.send([]tio.Packet{flowTCPSuperpacket(0, seq, 1)})
}
require.Equal(t, uint64(16), (ci.txBudget.state.Load()>>24)&txBudgetMask)
done := make(chan struct{})
go func() { defer close(done); p.send([]tio.Packet{flowTCPSuperpacket(0, 7, 1)}) }()
select {
case <-done:
t.Error("relay recycled credit around a stalled direct reservation")
case <-time.After(50 * time.Millisecond):
}
require.Equal(t, start+16, ci.messageCounter.Load())
release.Do(func() { close(unblock) })
<-done
p.drain()
require.Zero(t, ci.txBudget.state.Load())
}
+604
View File
@@ -0,0 +1,604 @@
//go:build linux && !android && !e2e_testing
package nebula
import (
"fmt"
"net/netip"
"os"
"os/exec"
"slices"
"sync"
"testing"
"time"
"github.com/flynn/noise"
"github.com/rcrowley/go-metrics"
"github.com/slackhq/nebula/config"
"github.com/slackhq/nebula/cpupick"
"github.com/slackhq/nebula/firewall"
"github.com/slackhq/nebula/header"
"github.com/slackhq/nebula/noiseutil"
"github.com/slackhq/nebula/overlay/batch"
"github.com/slackhq/nebula/overlay/tio"
"github.com/slackhq/nebula/test"
"github.com/slackhq/nebula/udp"
"github.com/slackhq/nebula/util"
"github.com/stretchr/testify/require"
"go.uber.org/goleak"
"golang.org/x/sys/unix"
)
// TestReservedEncryptionMatchesInline encrypts a batch with counters reserved up front: the receiver accepts every
// segment, in order.
func TestReservedEncryptionMatchesInline(t *testing.T) {
sender, receiver := newFlowTestPair(t, noise.CipherChaChaPoly, stagedConfig{})
packets, want := flowTestBatches(1, 3, 3, 9)
r := txReserver{f: sender.f}
items := r.collect(nil, packets[0], &firewall.ParsedPacket{}, make([]byte, mtu), 0, nil)
require.Equal(t, uint64(len(want)), r.tunnels[0].n)
sb := batch.NewSendBatch(sender.conn, 128, 65536)
for _, it := range r.reserve(items) {
sender.f.encryptTxItem(&it, make([]byte, 12), sb)
}
sender.f.flushSendBatch(sb, 0)
require.Equal(t, want, decryptWire(t, receiver, sender.conn.captured()))
}
// TestSegmentCount checks tio.Packet.SegmentCount predicts exactly the segments tio.SegmentSuperpacket cuts, odd tails included.
func TestSegmentCount(t *testing.T) {
require.Equal(t, 1, tio.Packet{Bytes: make([]byte, 60)}.SegmentCount())
for _, segs := range []int{1, 2, 3, 45} {
for _, tail := range []int{0, 1, flowTestMSS - 1} {
pkt := flowTCPSuperpacket(0, 0, segs)
pkt.Bytes = pkt.Bytes[:len(pkt.Bytes)-tail]
pkt.GSO = tio.GSOInfo{Size: flowTestMSS, HdrLen: 40, CsumStart: 20, Proto: tio.GSOProtoTCP}
want, got := pkt.SegmentCount(), 0
require.NoError(t, tio.SegmentSuperpacket(pkt, func([]byte) error { got++; return nil }))
require.Equal(t, want, got, "segs %d tail %d", segs, tail)
}
}
}
// TestFlowStagedTXOrderAndCounters runs the staged transmit pipeline with shuffled workers and a slow socket, so the
// sender lags and the reader runs into backpressure, then fails the tun read with batches in flight: the wire must
// carry every segment once, in tun read order, under strictly increasing counters that were each reserved exactly
// once, and the read error is still reported.
func TestFlowStagedTXOrderAndCounters(t *testing.T) {
defer goleak.VerifyNone(t, goleak.IgnoreCurrent())
for _, cipher := range []noise.CipherFunc{noiseutil.CipherAESGCM, noise.CipherChaChaPoly} {
t.Run(cipher.CipherName(), func(t *testing.T) {
if cipher.CipherName() == noiseutil.CipherAESGCM.CipherName() && noiseutil.EncryptLockNeeded {
t.Skip("AES-GCM requires encryption in nonce order")
}
sender, receiver := newFlowTestPair(t, cipher, stagedOn(4))
delayCrypto(sender, func(n uint64) {
if n%54 == 0 {
time.Sleep(time.Millisecond)
}
})
// Far slower than the reader, even under the race detector
sender.conn.delay = 8 * time.Millisecond
batches, want := flowTestBatches(60, 6, 3, 9)
start := sender.hostinfo.ConnectionState.messageCounter.Load()
tx := metrics.GetOrRegisterCounter("flow.tx.batches", nil)
tx0 := tx.Count()
sender.f.listenIn(newFlowBatchQueue(batches), 0)
require.Equal(t, int64(len(batches)), tx.Count()-tx0, "every batch uses the ordered sender")
require.Equal(t, want, decryptWire(t, receiver, sender.conn.captured()), "wire order must match tun read order")
require.Equal(t, start+uint64(len(want)), sender.hostinfo.ConnectionState.messageCounter.Load())
require.NotNil(t, sender.f.fatalErr.Load())
})
}
}
// TestFlowStagedTXCloseInFlight closes the interface and tun while batches are in flight, 20 times over.
func TestFlowStagedTXCloseInFlight(t *testing.T) {
defer goleak.VerifyNone(t, goleak.IgnoreCurrent())
for range 20 {
sender, _ := newFlowTestPair(t, noise.CipherChaChaPoly, stagedOn(3))
sender.conn.delay = time.Millisecond
batches, _ := flowTestBatches(400, 4, 2, 8)
q := newFlowBatchQueue(batches)
done := make(chan struct{})
go func() { sender.f.listenIn(q, 0); close(done) }()
require.Eventually(t, func() bool { return q.reads.Load() > 5 }, 5*time.Second, 100*time.Microsecond)
sender.f.closed.Store(true)
require.NoError(t, q.Close())
<-done
}
}
// TestFlowStagedTXExhausted drops every batch of a tunnel whose counter runs out, like inline sends do.
func TestFlowStagedTXExhausted(t *testing.T) {
defer goleak.VerifyNone(t, goleak.IgnoreCurrent())
sender, _ := newFlowTestPair(t, noise.CipherChaChaPoly, stagedOn(2))
ci := sender.hostinfo.ConnectionState
ci.messageCounter.Store(RejectAfterMessages - 3)
sender.f.listenIn(newFlowBatchQueue([][]tio.Packet{{flowTCPSuperpacket(0, 0, 10)}, {flowTCPSuperpacket(0, 1, 2)}}), 0)
require.Empty(t, sender.conn.captured())
require.Equal(t, RejectAfterMessages, ci.messageCounter.Load())
require.Equal(t, int64(12), sender.f.messageMetrics.txExhausted.Count())
require.Zero(t, ci.txBudget.state.Load())
}
// TestFlowStagedTXRelay sends staged batches, and an empty read, through a relay: outer and inner layers both verify,
// in order, and go to the relay.
// With a tiny MSS, the middle superpacket alone exceeds the tunnels' whole credit: it must be split, not admitted as an
// unbounded lone batch, with either replay window.
func TestFlowStagedTXRelay(t *testing.T) {
defer goleak.VerifyNone(t, goleak.IgnoreCurrent())
for _, window := range budgetWindows {
t.Run(fmt.Sprintf("window=%d", window), func(t *testing.T) {
sender, receiver := newFlowTestPair(t, noise.CipherChaChaPoly, stagedOn(2))
sender.hostinfo.ConnectionState.window = NewBits(window)
receiver.hostinfo.ConnectionState.window = NewBits(window)
relayRemote, relayHI, relayPeer := addTestRelay(t, sender, window)
batches, want := flowTestBatches(2, 3, 1, 6)
var payload []byte
large := flowTCPSuperpacket(0, 9, 45)
large.GSO.Size = 1
payload = append([]byte(nil), large.Bytes[40:]...)
batches = [][]tio.Packet{batches[0], {large}, batches[1]}
sender.f.listenIn(newFlowBatchQueue(append(batches, nil)), 0)
wire := sender.conn.captured()
require.Len(t, wire, len(want)+len(payload))
var got []decodedSeg
var tiny []byte
var lastOuter, lastInner uint64
for i, pkt := range wire {
require.Equal(t, relayRemote, sender.conn.addrs[i])
h := &header.H{}
require.NoError(t, h.Parse(pkt))
require.Greater(t, h.MessageCounter, lastOuter)
lastOuter = h.MessageCounter
require.NoError(t, relayPeer.VerifyRelay(nil, h.MessageCounter, pkt, make([]byte, 12)))
pkt = pkt[header.Len : len(pkt)-16]
require.NoError(t, h.Parse(pkt))
require.Greater(t, h.MessageCounter, lastInner)
lastInner = h.MessageCounter
plain, err := receiver.hostinfo.ConnectionState.Decrypt(receiver.f.l, h.MessageCounter, pkt, make([]byte, 12))
require.NoError(t, err)
if len(plain) == 41 {
tiny = append(tiny, plain[40])
} else {
got = append(got, decodeSeg(plain[40:]))
}
}
require.Equal(t, want, got)
require.Equal(t, payload, tiny)
require.Zero(t, sender.hostinfo.ConnectionState.txBudget.state.Load())
require.Zero(t, relayHI.ConnectionState.txBudget.state.Load())
})
}
}
// addTestRelay makes sender reach its peer only through a relay tunnel with replay windows of window. It returns the
// relay's underlay address, its hostinfo and the relay's side of the tunnel.
func addTestRelay(t testing.TB, sender *flowTestPeer, window uint64) (netip.AddrPort, *HostInfo, *ConnectionState) {
relayInit, relayResp := runTestHandshake(t)
relayCI, err := newConnectionStateFromResult(relayInit)
require.NoError(t, err)
relayPeer, err := newConnectionStateFromResult(relayResp)
require.NoError(t, err)
relayCI.window, relayPeer.window = NewBits(window), NewBits(window)
relayAddr := netip.MustParseAddr("10.0.0.3")
relayRemote := netip.MustParseAddrPort("192.0.2.3:4242")
relay := &Relay{Type: TerminalType, State: Established, LocalIndex: 5, RemoteIndex: 6, PeerAddr: flowTestRemote}
relayHI := &HostInfo{
vpnAddrs: []netip.Addr{relayAddr},
ConnectionState: relayCI,
relayState: RelayState{
relayForByAddr: map[netip.Addr]*Relay{flowTestRemote: relay},
relayForByIdx: map[uint32]*Relay{relay.LocalIndex: relay},
},
}
relayHI.remote.Store(&relayRemote)
sender.f.hostMap.Hosts[relayAddr] = relayHI
sender.hostinfo.remote.Store(&netip.AddrPort{})
sender.hostinfo.relayState.relays = []netip.Addr{relayAddr}
return relayRemote, relayHI, relayPeer
}
// affinityQueue makes every read start with an idle pipeline: before each read it waits until conn has sent what was
// read before, recording how many sends that took, then samples the reader's actual thread affinity.
type affinityQueue struct {
*flowBatchQueue
conn *affinityConn
sent int
boundaries []int
masks []unix.CPUSet
}
func (q *affinityQueue) Read() ([]tio.Packet, error) {
if n := q.reads.Load(); n > 0 {
for _, p := range q.batches[n-1] {
q.sent += p.SegmentCount()
}
}
q.boundaries = append(q.boundaries, q.conn.waitFor(q.sent))
q.masks = append(q.masks, threadMask())
return q.flowBatchQueue.Read()
}
// affinityConn captures every send, sampling the sending thread's actual affinity in each WriteBatch.
type affinityConn struct {
flowCaptureConn
masks []unix.CPUSet
sizes []int
}
func (c *affinityConn) WriteBatch(p [][]byte, addrs []netip.AddrPort) (int, error) {
mask := threadMask()
c.mu.Lock()
c.masks = append(c.masks, mask)
c.sizes = append(c.sizes, len(p))
c.mu.Unlock()
return c.flowCaptureConn.WriteBatch(p, addrs)
}
// waitFor waits until n packets were sent and returns how many WriteBatch calls that took.
func (c *affinityConn) waitFor(n int) int {
for len(c.captured()) < n {
time.Sleep(50 * time.Microsecond)
}
c.mu.Lock()
defer c.mu.Unlock()
return len(c.masks)
}
func threadMask() unix.CPUSet {
var mask unix.CPUSet
if err := unix.SchedGetaffinity(0, &mask); err != nil {
panic(err)
}
return mask
}
// requireFlowCPU checks every mask is just cpu, or with cpu -1, the whole allowed set.
func requireFlowCPU(t *testing.T, masks []unix.CPUSet, cpu int, allowed []int) {
t.Helper()
require.NotEmpty(t, masks)
for _, mask := range masks {
if cpu >= 0 {
require.Equal(t, 1, mask.Count())
require.True(t, mask.IsSet(cpu), "expected CPU %d", cpu)
continue
}
require.Equal(t, len(allowed), mask.Count())
for _, c := range allowed {
require.True(t, mask.IsSet(c))
}
}
}
// TestFlowStagedTXAffinity sends large, small and large reads, each from an idle pipeline, and checks the order on the
// wire and where the reader and each send actually ran, for every CPU placement, with one routine and with several. A
// staged sender is only pinned to an explicit entry other than its reader's CPU, and inline sends stay on the reader.
// With the threshold, only the small read goes inline.
// The reader only reads again once its earlier reads are on the wire, so this also checks the sender never waits for
// the reader. Pinning threads changes the process, so the test runs in a child.
func TestFlowStagedTXAffinity(t *testing.T) {
if os.Getenv("NEBULA_FLOW_AFFINITY_TEST") != "1" {
cmd := exec.Command(os.Args[0], "-test.run=^TestFlowStagedTXAffinity$")
cmd.Env = append(os.Environ(), "NEBULA_FLOW_AFFINITY_TEST=1")
out, err := cmd.CombinedOutput()
require.NoError(t, err, "%s", out)
return
}
allowed, err := util.AllowedCPUs()
require.NoError(t, err)
for _, placement := range []string{"fallback", "automatic", "explicit", "explicit-single"} {
for _, pin := range []bool{false, true} {
for _, sc := range sendPaths() {
for _, routines := range []int{1, 2} {
t.Run(fmt.Sprintf("%s/pin=%t/%s/routines=%d", placement, pin, stagedName(sc), routines), func(t *testing.T) {
if pin && len(allowed) < 2 {
t.Skip("requires at least two allowed CPUs")
}
if sc.inlineBelow > 0 {
// Switch on every read that wants the other mode, so the small read goes inline between
// staged ones
sc.gateHold = 1
}
sender, receiver := newFlowTestPair(t, noise.CipherChaChaPoly, sc)
f := sender.f
f.pinThreads, f.routines = pin, routines
switch placement {
case "automatic":
f.defaultCpuAffinity = cpupick.Default(routines, 4242, nil)
case "explicit":
f.cpuAffinity = []int{allowed[len(allowed)-1], allowed[0]}
case "explicit-single":
f.cpuAffinity = allowed[len(allowed)-1:]
}
readerCPU, sendCPU := -1, -1
if pin {
readerCPU = f.threadCPU(0)
sendCPU = readerCPU
if sc.tx {
// Never the reader's CPU, and no automatic choice: unpinned unless an explicit entry fits
sendCPU = -1
if placement == "explicit" {
sendCPU = f.cpuAffinity[1]
}
}
}
smallCPU := sendCPU
if sc.inlineBelow > 0 {
smallCPU = readerCPU
}
conn := &affinityConn{}
f.writers = []udp.Conn{conn}
batches, want := flowTestBatches(3, 8, 1, 45)
batches[1] = batches[1][:1]
want = append(want[:405], want[720:]...)
q := &affinityQueue{flowBatchQueue: newFlowBatchQueue(batches), conn: conn}
inline := metrics.GetOrRegisterCounter("flow.tx.inline", nil)
inline0 := inline.Count()
f.listenIn(q, 0)
require.Equal(t, want, decryptWire(t, receiver, conn.captured()))
if sc.inlineBelow > 0 {
require.Equal(t, int64(1), inline.Count()-inline0)
}
b := q.boundaries
requireFlowCPU(t, q.masks, readerCPU, allowed)
requireFlowCPU(t, conn.masks[:b[1]], sendCPU, allowed)
requireFlowCPU(t, conn.masks[b[1]:b[2]], smallCPU, allowed)
requireFlowCPU(t, conn.masks[b[2]:], sendCPU, allowed)
})
}
}
}
}
}
// sendPaths is inline, staged and, with the threshold, adaptive transmit.
func sendPaths() []stagedConfig {
return []stagedConfig{{}, stagedOn(2), adaptive(2)}
}
// requireAccepted checks the receiver accepts every packet of wire in the order given. With several readers the wire
// order differs from counter order, but every packet must still authenticate and fit within the replay window.
func requireAccepted(t *testing.T, receiver *flowTestPeer, wire [][]byte) {
t.Helper()
for _, pkt := range wire {
h := &header.H{}
require.NoError(t, h.Parse(pkt))
_, err := receiver.hostinfo.ConnectionState.Decrypt(receiver.f.l, h.MessageCounter, pkt, make([]byte, 12))
require.NoError(t, err, "counter %d", h.MessageCounter)
}
}
// slowConn delays every WriteBatch, then writes to the shared capture.
type slowConn struct {
*flowCaptureConn
delay time.Duration
}
func (c slowConn) WriteBatch(bufs [][]byte, addrs []netip.AddrPort) (int, error) {
time.Sleep(c.delay)
return c.flowCaptureConn.WriteBatch(bufs, addrs)
}
// TestFlowTXBudgetManyReaders saturates one tunnel from eight readers, one of them on a slow socket that lets the
// others overtake it, alongside a burst of unreserved control messages: in the order they reach the wire, every packet
// is accepted by the receiver's replay window, so none was sent twice or displaced past the window.
func TestFlowTXBudgetManyReaders(t *testing.T) {
defer goleak.VerifyNone(t, goleak.IgnoreCurrent())
for _, window := range budgetWindows {
t.Run(fmt.Sprintf("window=%d", window), func(t *testing.T) {
sender, receiver := newFlowTestPair(t, noise.CipherChaChaPoly, stagedOn(3))
ci := sender.hostinfo.ConnectionState
ci.window = NewBits(window)
receiver.hostinfo.ConnectionState.window = NewBits(window)
sender.f.routines = 8
sender.f.writers = append([]udp.Conn{slowConn{sender.conn, 4 * time.Millisecond}}, slices.Repeat(sender.f.writers, 8)...)
start := ci.messageCounter.Load()
var wg sync.WaitGroup
for q := range 8 {
wg.Go(func() {
batches, _ := flowTestBatches(28, 8, 2, 45)
p := newStagedTx(sender.f, newFlowBatchQueue(nil), q)
defer p.close()
for _, packets := range batches {
p.send(packets)
}
})
}
// A bounded burst of unreserved control messages uses the documented margin, on writer 8
wg.Go(func() {
for range 128 {
sender.f.sendNoMetrics(header.Test, header.TestRequest, ci, sender.hostinfo, flowTestUnder, []byte("x"), make([]byte, 12), make([]byte, mtu), 8)
time.Sleep(100 * time.Microsecond)
}
})
wg.Wait()
require.Zero(t, ci.txBudget.state.Load())
wire := sender.conn.captured()
require.Len(t, wire, 8*28*360+128)
require.Equal(t, start+uint64(len(wire)), ci.messageCounter.Load())
requireAccepted(t, receiver, wire)
})
}
}
// TestFlowStagedTXInlineOnlyWhenEmpty: a small read behind a staged batch still in flight must not go inline before
// that batch is on the wire, it would overtake it.
func TestFlowStagedTXInlineOnlyWhenEmpty(t *testing.T) {
defer goleak.VerifyNone(t, goleak.IgnoreCurrent())
sc := adaptive(2)
sc.inlineBelow, sc.gateHold = 4, 1
sender, receiver := newFlowTestPair(t, noise.CipherChaChaPoly, sc)
p := newStagedTx(sender.f, newFlowBatchQueue(nil), 0)
block := make(chan struct{})
delayCrypto(sender, func(uint64) { <-block })
batches, want := flowTestBatches(1, 4, 1, 3)
p.send(batches[0][:3]) // switches to fanout, its worker is blocked
require.Equal(t, 1, p.inFlight)
unblock := time.AfterFunc(20*time.Millisecond, func() { close(block) })
defer unblock.Stop()
p.send(batches[0][3:]) // switches to inline, which waits for the staged batch first
require.Zero(t, p.inFlight)
p.close()
require.Equal(t, want, decryptWire(t, receiver, sender.conn.captured()))
}
// TestFlowStagedTXInlineBelowZero: with inline_below 0 an idle reader never sends a batch itself, in either
// direction: every read goes through the workers and the ordered sender or writer.
func TestFlowStagedTXInlineBelowZero(t *testing.T) {
defer goleak.VerifyNone(t, goleak.IgnoreCurrent())
l := test.NewLogger()
c := config.NewC(l)
c.Settings = map[string]any{"tun": map[string]any{"staged": map[string]any{"workers": 2, "inline_below": 0}}}
sc := parseStagedConfig(c, l)
if !sc.tx {
t.Skip("transmit stays inline in this build")
}
sender, receiver := newFlowTestPair(t, noise.CipherChaChaPoly, sc)
batches, want := flowTestBatches(20, 2, 1, 4)
txInline := metrics.GetOrRegisterCounter("flow.tx.inline", nil)
tx := metrics.GetOrRegisterCounter("flow.tx.batches", nil)
rxInline := metrics.GetOrRegisterCounter("flow.rx.inline", nil)
txInline0, tx0, rxInline0, rx0 := txInline.Count(), tx.Count(), rxInline.Count(), rxBatches.Count()
sender.f.listenIn(newFlowBatchQueue(batches), 0)
wire := sender.conn.captured()
require.Equal(t, want, decryptWire(t, receiver, wire))
require.Zero(t, txInline.Count()-txInline0)
require.Equal(t, int64(len(batches)), tx.Count()-tx0)
receiver.receive(&rxConn{wire: wire, sizes: []int{1, 2, 4}})
require.Equal(t, want, receiver.tun.segments(t))
require.Zero(t, rxInline.Count()-rxInline0)
require.Positive(t, rxBatches.Count()-rx0)
}
// TestFlowStagedTXDisabled: with tx false the reader never builds a staged pipeline, even on a queue that could hand
// off its batches. Receive stays staged.
func TestFlowStagedTXDisabled(t *testing.T) {
defer goleak.VerifyNone(t, goleak.IgnoreCurrent())
l := test.NewLogger()
c := config.NewC(l)
c.Settings = map[string]any{"tun": map[string]any{"staged": map[string]any{"workers": 2, "tx": false}}}
sc := parseStagedConfig(c, l)
require.False(t, sc.tx)
require.True(t, sc.rx)
sender, receiver := newFlowTestPair(t, noise.CipherChaChaPoly, sc)
batches, want := flowTestBatches(4, 8, 1, 45)
tx := metrics.GetOrRegisterCounter("flow.tx.batches", nil)
txInline := metrics.GetOrRegisterCounter("flow.tx.inline", nil)
tx0, txInline0, rx0 := tx.Count(), txInline.Count(), rxBatches.Count()
q := &swapCountQueue{flowBatchQueue: newFlowBatchQueue(batches)}
sender.f.listenIn(q, 0)
wire := sender.conn.captured()
require.Equal(t, want, decryptWire(t, receiver, wire))
require.Zero(t, q.swaps, "newStagedTx always takes the queue's buffer, so it never ran")
require.Equal(t, tx0, tx.Count())
require.Equal(t, txInline0, txInline.Count())
receiver.receive(&rxConn{wire: wire, batchLen: 512})
require.Equal(t, want, receiver.tun.segments(t))
require.Greater(t, rxBatches.Count(), rx0)
}
// swapCountQueue counts SwapRxBuf calls.
type swapCountQueue struct {
*flowBatchQueue
swaps int
}
func (q *swapCountQueue) SwapRxBuf(buf []byte) []byte {
q.swaps++
return q.flowBatchQueue.SwapRxBuf(buf)
}
// TestFlowStagedTXAdaptiveBudget: a fast reader's adaptive sends must stop spending credit until another reader's
// earlier reservation reaches the wire.
func TestFlowStagedTXAdaptiveBudget(t *testing.T) {
for _, shape := range []struct {
name string
packets, segments int
}{
{"single", 1, 1}, {"batch", 8, 30},
} {
t.Run(shape.name, func(t *testing.T) {
defer goleak.VerifyNone(t, goleak.IgnoreCurrent())
sc := adaptive(2)
// p0's large read must go to the workers at once, p1 stays inline
sc.gateHold = 1
sender, receiver := newFlowTestPair(t, noise.CipherChaChaPoly, sc)
sender.f.routines = 2
sender.f.writers = []udp.Conn{sender.conn, sender.conn}
ci := sender.hostinfo.ConnectionState
start := ci.messageCounter.Load()
entered, unblock := make(chan struct{}), make(chan struct{})
delayCrypto(sender, func(n uint64) {
if n == start+1 {
close(entered)
<-unblock
}
})
p0 := newStagedTx(sender.f, newFlowBatchQueue(nil), 0)
p1 := newStagedTx(sender.f, newFlowBatchQueue(nil), 1)
defer p0.close()
defer p1.close()
var release sync.Once
defer release.Do(func() { close(unblock) })
large, _ := flowTestBatches(1, 8, 1, 45)
p0.send(large[0])
<-entered
perBatch := shape.packets * shape.segments
small, _ := flowTestBatches(9600/perBatch, shape.packets, 1, shape.segments)
fits := int(ci.txBudgetLimit()-360) / perBatch
for _, packets := range small[:fits] {
p1.send(packets)
}
require.Equal(t, uint64(360+fits*perBatch), (ci.txBudget.state.Load()>>24)&txBudgetMask, "inline sends must spend shared credit")
done := make(chan struct{})
go func() {
defer close(done)
for _, packets := range small[fits:] {
p1.send(packets)
}
}()
select {
case <-done:
t.Error("adaptive reader bypassed outstanding credit")
case <-time.After(50 * time.Millisecond):
}
require.LessOrEqual(t, ci.messageCounter.Load()-start, ci.txBudgetLimit())
release.Do(func() { close(unblock) })
<-done
p0.drain()
p1.drain()
wire := sender.conn.captured()
require.Len(t, wire, 360+40*240)
requireAccepted(t, receiver, wire)
require.Zero(t, ci.txBudget.state.Load())
})
}
}
// BenchmarkFlowStagedTX runs reads of eight 45-segment superpackets through listenIn into a socket that discards
// them, inline and staged.
func BenchmarkFlowStagedTX(b *testing.B) {
for _, cipher := range []noise.CipherFunc{noiseutil.CipherAESGCM, noise.CipherChaChaPoly} {
for _, sc := range []stagedConfig{{}, stagedOn(4)} {
b.Run(cipher.CipherName()+"/"+stagedName(sc), func(b *testing.B) {
if sc.tx && cipher.CipherName() == noiseutil.CipherAESGCM.CipherName() && noiseutil.EncryptLockNeeded {
b.Skip("AES-GCM requires encryption in nonce order")
}
sender, _ := newFlowTestPair(b, cipher, sc)
sender.f.writers = []udp.Conn{udp.NoopConn{}}
batch, _ := flowTestBatches(1, 8, 4, 45)
batches := make([][]tio.Packet, b.N)
for i := range batches {
batches[i] = batch[0]
}
b.SetBytes(int64(8 * 45 * flowTestMSS))
b.ReportAllocs()
b.ResetTimer()
sender.f.listenIn(newFlowBatchQueue(batches), 0)
})
}
}
}
+4 -3
View File
@@ -1,6 +1,6 @@
module github.com/slackhq/nebula
go 1.26.0
go 1.27.2
require (
dario.cat/mergo v1.0.2
@@ -33,7 +33,7 @@ require (
golang.zx2c4.com/wireguard/windows v1.0.1
google.golang.org/protobuf v1.36.12
gopkg.in/yaml.v3 v3.0.1
gvisor.dev/gvisor v0.0.0-20240423190808-9d7a357edefe
gvisor.dev/gvisor v0.0.0-20261014193016-04d31b385980
)
require (
@@ -45,5 +45,6 @@ require (
github.com/prometheus/common v0.70.1 // indirect
github.com/prometheus/procfs v0.21.1 // indirect
github.com/vishvananda/netns v0.0.5 // indirect
golang.org/x/time v0.5.0 // indirect
golang.org/x/exp v0.0.0-20250711185948-6ae5c78190dc // indirect
golang.org/x/time v0.15.0 // indirect
)
+6 -4
View File
@@ -157,6 +157,8 @@ golang.org/x/crypto v0.0.0-20200622213623-75b288015ac9/go.mod h1:LzIPMQfyMNhhGPh
golang.org/x/crypto v0.0.0-20210322153248-0c34fe9e7dc2/go.mod h1:T9bdIzuCu7OtxOm1hfPfRQxPLYneinmdGuTeoZ9dtd4=
golang.org/x/crypto v0.57.0 h1:3ZVCjf8Ggz7zneR/EHRVx68Ctf+2pmIMP2UFhh9cC6M=
golang.org/x/crypto v0.57.0/go.mod h1:Fdz0i5U6CoizGwLda9DttjSk6qlZo25zYNtR+ycvuZA=
golang.org/x/exp v0.0.0-20250711185948-6ae5c78190dc h1:TS73t7x3KarrNd5qAipmspBDS1rkMcgVG/fS1aRb4Rc=
golang.org/x/exp v0.0.0-20250711185948-6ae5c78190dc/go.mod h1:A+z0yzpGtvnG90cToK5n2tu8UJVP2XUATh+r+sfOOOc=
golang.org/x/lint v0.0.0-20200302205851-738671d3881b/go.mod h1:3xt1FjdF8hUf6vQPIChWIBhFzV8gjjsPE/fR3IyQdNY=
golang.org/x/mod v0.1.1-0.20191105210325-c90efee705ee/go.mod h1:QqPTAvyqsEbceGzBzNggFXnrqF1CaUcvgkdR5Ot7KZg=
golang.org/x/mod v0.2.0/go.mod h1:s0Qsj1ACt9ePp/hMypM3fl4fZqREWJwdYDEqhRiZZUA=
@@ -203,8 +205,8 @@ golang.org/x/term v0.46.0/go.mod h1:+K02xbkittuwc0Am4abfA3Fc+XRGXkvBXNO88NCXPoc=
golang.org/x/text v0.3.0/go.mod h1:NqM8EUOU14njkJ3fqMW+pc6Ldnwhi/IjpwHt7yyuwOQ=
golang.org/x/text v0.3.2/go.mod h1:bEr9sfX3Q8Zfm5fL9x+3itogRgK3+ptLWKqgva+5dAk=
golang.org/x/text v0.3.3/go.mod h1:5Zoc/QRtKVWzQhOtBMvqHzDpF6irO9z98xDceosuGiQ=
golang.org/x/time v0.5.0 h1:o7cqy6amK/52YcAKIPlM3a+Fpj35zvRj2TP+e1xFSfk=
golang.org/x/time v0.5.0/go.mod h1:3BpzKBy/shNhVucY/MWOyx10tF3SFh9QdLuxbVysPQM=
golang.org/x/time v0.15.0 h1:bbrp8t3bGUeFOx08pvsMYRTCVSMk89u4tKbNOZbp88U=
golang.org/x/time v0.15.0/go.mod h1:Y4YMaQmXwGQZoFaVFk4YpCt4FLQMYKZe9oeV/f4MSno=
golang.org/x/tools v0.0.0-20180917221912-90fa682c2a6e/go.mod h1:n7NCudcB/nEzxVGmLbDWY5pfWTLqBcC2KZ6jyYvM4mQ=
golang.org/x/tools v0.0.0-20191119224855-298f0cb1881e/go.mod h1:b+2E5dAYhXwXZwtnZ6UAqBI28+e2cm9otk0dWdXHAEo=
golang.org/x/tools v0.0.0-20200130002326-2f3ba24bd6e7/go.mod h1:TB2adYChydJhpapKDTa4BR/hXlZSLoq2Wpct/0txZ28=
@@ -243,5 +245,5 @@ gopkg.in/yaml.v2 v2.3.0/go.mod h1:hI93XBmqTisBFMUTm0b8Fm+jr3Dg1NNxqwp+5A1VGuI=
gopkg.in/yaml.v3 v3.0.0-20200313102051-9f266ea9e77c/go.mod h1:K4uyk7z7BCEPqu6E+C64Yfv1cQ7kz7rIZviUmN+EgEM=
gopkg.in/yaml.v3 v3.0.1 h1:fxVm/GzAzEWqLHuvctI91KS9hhNmmWOoWu0XTYJS7CA=
gopkg.in/yaml.v3 v3.0.1/go.mod h1:K4uyk7z7BCEPqu6E+C64Yfv1cQ7kz7rIZviUmN+EgEM=
gvisor.dev/gvisor v0.0.0-20240423190808-9d7a357edefe h1:fre4i6mv4iBuz5lCMOzHD1rH1ljqHWSICFmZRbbgp3g=
gvisor.dev/gvisor v0.0.0-20240423190808-9d7a357edefe/go.mod h1:sxc3Uvk/vHcd3tj7/DHVBoR5wvWT/MmRq2pj7HRJnwU=
gvisor.dev/gvisor v0.0.0-20261014193016-04d31b385980 h1:ribyrTYQ/QYeUIs8x8bVLYwGyepa7RnHLqJzegT5YYk=
gvisor.dev/gvisor v0.0.0-20261014193016-04d31b385980/go.mod h1:pK/dapF5Bf3KGW7/kd5CI5IC4lYh9FMFY1qETAIGLXk=
+7 -5
View File
@@ -316,9 +316,9 @@ type cachedPacketMetrics struct {
func NewHostMapFromConfig(l *slog.Logger, c *config.C) *HostMap {
hm := newHostMap(l)
hm.reload(c, true)
c.RegisterReloadCallback(func(c *config.C) {
hm.reload(c, false)
hm.reload(c, true, nil)
c.RegisterReloadCallback(func(c *config.C, r *config.Reload) {
hm.reload(c, false, r)
})
l.Info("Main HostMap created", "preferredRanges", hm.GetPreferredRanges())
@@ -337,7 +337,8 @@ func newHostMap(l *slog.Logger) *HostMap {
}
}
func (hm *HostMap) reload(c *config.C, initial bool) {
// r is nil on the initial load
func (hm *HostMap) reload(c *config.C, initial bool, r *config.Reload) {
if initial || c.HasChanged("preferred_ranges") {
var preferredRanges []netip.Prefix
rawPreferredRanges := c.GetStringSlice("preferred_ranges", []string{})
@@ -348,8 +349,9 @@ func (hm *HostMap) reload(c *config.C, initial bool) {
if err != nil {
hm.l.Warn("Failed to parse preferred ranges, ignoring",
"error", err,
"range", rawPreferredRanges,
"range", rawPreferredRange,
)
r.Failed()
continue
}
+13
View File
@@ -447,3 +447,16 @@ func TestHostInfo_markOutOnly(t *testing.T) {
assert.True(t, h.markOut(6), "a relayed send must not consume the epoch edge")
assert.False(t, h.markOut(6))
}
// A preferred range that doesn't parse is skipped and the rest are used, the reload says one was skipped
func TestHostMap_reloadBadPreferredRangeFails(t *testing.T) {
l := test.NewLogger()
c := config.NewC(l)
require.NoError(t, c.LoadString("preferred_ranges: [10.0.0.0/8]\n"))
hm := NewHostMapFromConfig(l, c)
res := c.ReloadConfigString("preferred_ranges: [10.0.0.0/8, nope]\n")
require.NoError(t, res.Err)
assert.True(t, res.Failed)
assert.Equal(t, []netip.Prefix{netip.MustParsePrefix("10.0.0.0/8")}, hm.GetPreferredRanges())
}
+82 -158
View File
@@ -18,12 +18,20 @@ import (
)
func (f *Interface) consumeInsidePacket(pkt tio.Packet, fwPacket *firewall.ParsedPacket, nb []byte, sendBatch *batch.SendBatch, rejectBuf []byte, q int, localCache firewall.ConntrackCache) {
if hostinfo := f.filterInsidePacket(pkt, fwPacket, rejectBuf, q, localCache); hostinfo != nil {
f.sendInsideMessage(hostinfo, pkt, nb, sendBatch)
}
}
// filterInsidePacket parses and filters pkt, handling local traffic, destination lookup, pending handshakes and
// the outbound firewall. It returns the hostinfo to send pkt to, or nil when pkt was dropped, rejected, forwarded
// to self or cached for a pending handshake.
func (f *Interface) filterInsidePacket(pkt tio.Packet, fwPacket *firewall.ParsedPacket, rejectBuf []byte, q int, localCache firewall.ConntrackCache) *HostInfo {
// borrowed: pkt.Bytes is owned by the originating tio.Queue and is
// only valid until the next Read on that queue. Every consumer below
// (parse, self-forward, handshake cache, sendInsideMessage) reads it
// synchronously; do not retain pkt outside this call. If a future
// caller needs to keep the packet, use pkt.Clone() to detach it from
// the borrow.
// only valid until the next Read on that queue. Filtering and sending
// must finish before then. Self-forwarding writes synchronously and the
// handshake cache copies each segment. To retain the packet beyond the
// next Read, use pkt.Clone() to detach it from the borrow.
//
// pkt.Bytes is either one IP datagram (GSO zero) or a TSO/USO
// superpacket. In both cases the L3+L4 headers at the start describe
@@ -38,13 +46,13 @@ func (f *Interface) consumeInsidePacket(pkt tio.Packet, fwPacket *firewall.Parse
"error", err,
)
}
return
return nil
}
// Ignore local broadcast packets
if f.dropLocalBroadcast {
if f.myBroadcastAddrsTable.Contains(fwPacket.RemoteAddr) {
return
return nil
}
}
@@ -71,12 +79,12 @@ func (f *Interface) consumeInsidePacket(pkt tio.Packet, fwPacket *firewall.Parse
}
// Otherwise, drop. On linux, we should never see these packets - Linux
// routes packets from the nebula addr to the nebula addr through the loopback device.
return
return nil
}
// Ignore multicast packets
if f.dropMulticast && fwPacket.RemoteAddr.IsMulticast() {
return
return nil
}
hostinfo, ready := f.getOrHandshakeConsiderRouting(&fwPacket.Packet, func(hh *HandshakeHostInfo) {
@@ -103,50 +111,26 @@ func (f *Interface) consumeInsidePacket(pkt tio.Packet, fwPacket *firewall.Parse
"fwPacket", fwPacket,
)
}
return
return nil
}
if !ready {
return
return nil
}
dropReason := f.firewall.Drop(fwPacket.Packet, false, hostinfo, f.pki.GetCAPool(), localCache)
if dropReason == nil {
f.sendInsideMessage(hostinfo, pkt, nb, sendBatch)
} else {
f.rejectInside(packet, rejectBuf, q)
if f.l.Enabled(context.Background(), slog.LevelDebug) {
hostinfo.logger(f.l).Debug("dropping outbound packet",
"fwPacket", fwPacket,
"reason", dropReason,
)
}
return hostinfo
}
}
func (f *Interface) sendInsideEncrypt(hostinfo *HostInfo, ci *ConnectionState, seg, scratch, nb []byte) []byte {
if noiseutil.EncryptLockNeeded {
ci.writeLock.Lock()
}
c := ci.messageCounter.Add(1)
out := header.Encode(scratch, header.Version, header.Message, 0, hostinfo.remoteIndexId, c)
out, encErr := ci.eKey.EncryptDanger(out, out, seg, c, nb)
if noiseutil.EncryptLockNeeded {
ci.writeLock.Unlock()
}
if encErr != nil {
hostinfo.logger(f.l).Error("Failed to encrypt outgoing packet",
"error", encErr,
"udpAddr", hostinfo.GetRemote(),
"counter", c,
f.rejectInside(packet, rejectBuf, q)
if f.l.Enabled(context.Background(), slog.LevelDebug) {
hostinfo.logger(f.l).Debug("dropping outbound packet",
"fwPacket", fwPacket,
"reason", dropReason,
)
// Skip this segment; the rest of the superpacket can still go out. TCP will retransmit anything we drop here.
return nil
}
return out
return nil
}
// sendInsideMessage encrypts a firewall-approved inside packet (or every
@@ -156,88 +140,46 @@ func (f *Interface) sendInsideEncrypt(hostinfo *HostInfo, ci *ConnectionState, s
// scratch arena: SegmentSuperpacket builds each segment's plaintext in
// segScratch[:segLen] in turn, and we encrypt directly into a fresh SendBatch slot.
func (f *Interface) sendInsideMessage(hostinfo *HostInfo, pkt tio.Packet, nb []byte, sendBatch *batch.SendBatch) {
ci := hostinfo.ConnectionState
if ci.eKey == nil {
return
var it txItem
if f.prepareTxItem(&it, hostinfo, pkt) {
f.encryptTxItem(&it, nb, sendBatch)
}
}
// One traffic-out mark covers every segment of the superpacket; doing it
// per segment in sendInsideEncrypt paid an atomic store up to ~45 extra
// times per TSO packet, inside writeLock under boring crypto.
//
// We rebound since this tunnel last sent, ask the lighthouse to get the far side punching at us again
// recordOutbound marks traffic out on hostinfo, once per packet or superpacket, and when we rebound since this tunnel
// last sent, asks the lighthouse to get the far side punching at us again.
func (f *Interface) recordOutbound(hostinfo *HostInfo) {
if f.connectionManager.Out(hostinfo) {
f.lightHouse.QueryServer(hostinfo.vpnAddrs[0])
if f.l.Enabled(context.Background(), slog.LevelDebug) {
hostinfo.logger(f.l).Debug("Lighthouse update triggered for punch due to rebind epoch",
"vpnAddrs", hostinfo.vpnAddrs,
)
hostinfo.logger(f.l).Debug("Lighthouse update triggered for punch due to rebind epoch", "vpnAddrs", hostinfo.vpnAddrs)
}
}
}
remote := hostinfo.GetRemote()
if !remote.IsValid() { //the relay path
//first, find our relay hostinfo:
var relayHostInfo *HostInfo
var relay *Relay
var err error
for _, relayIP := range hostinfo.relayState.CopyRelayIps() {
relayHostInfo, relay, err = f.hostMap.QueryVpnAddrsRelayFor(hostinfo.vpnAddrs, relayIP)
if err != nil {
hostinfo.relayState.DeleteRelay(relayIP)
hostinfo.logger(f.l).Info("sendNoMetrics failed to find HostInfo",
"relay", relayIP,
"error", err,
)
continue
}
break
// findRelay returns the first relay that can reach hostinfo, forgetting the ones that no longer resolve.
func (f *Interface) findRelay(hostinfo *HostInfo) (*HostInfo, *Relay) {
for _, relayIP := range hostinfo.relayState.CopyRelayIps() {
via, relay, err := f.hostMap.QueryVpnAddrsRelayFor(hostinfo.vpnAddrs, relayIP)
if err == nil {
return via, relay
}
if relayHostInfo == nil || relay == nil {
//failure already logged
return
}
err = tio.SegmentSuperpacket(pkt, func(seg []byte) error {
//relay header + header + plaintext + AEAD tag + relay tag
scratch := sendBatch.Reserve(len(seg) + header.MaxOverhead)
innerPacket := f.sendInsideEncrypt(hostinfo, ci, seg, scratch[header.Len:], nb)
if innerPacket == nil {
return nil
}
//now we need to do a relay-encrypt:
toSend, err := f.prepareSendVia(relayHostInfo, relay, innerPacket, nb, scratch, true)
if err != nil {
//already logged
return nil
}
sendBatch.Commit(toSend, relayHostInfo.GetRemote())
return nil
})
if err != nil {
hostinfo.logger(f.l).Error("Failed to segment superpacket for relay send", "error", err)
}
return
hostinfo.relayState.DeleteRelay(relayIP)
hostinfo.logger(f.l).Info("sendNoMetrics failed to find HostInfo", "relay", relayIP, "error", err)
}
return nil, nil
}
err := tio.SegmentSuperpacket(pkt, func(seg []byte) error {
// header + plaintext + AEAD tag (16 bytes for both AES-GCM and ChaCha20-Poly1305)
scratch := sendBatch.Reserve(header.Len + len(seg) + 16)
out := f.sendInsideEncrypt(hostinfo, ci, seg, scratch, nb)
if out == nil {
return nil
}
sendBatch.Commit(out, remote)
return nil
})
// encryptMessage encodes the header for counter c and encrypts p behind it into out. The caller allocates c and
// holds writeLock when the cipher requires encryption in nonce order.
func (f *Interface) encryptMessage(t header.MessageType, st header.MessageSubType, hostinfo *HostInfo, ci *ConnectionState, c uint64, p, nb, out []byte, remote netip.AddrPort) []byte {
out = header.Encode(out, header.Version, t, st, hostinfo.remoteIndexId, c)
out, err := ci.eKey.EncryptDanger(out, out, p, c, nb)
if err != nil {
hostinfo.logger(f.l).Error("Failed to segment superpacket for send", "error", err)
hostinfo.logger(f.l).Error("Failed to encrypt outgoing packet", "error", err, "udpAddr", remote, "counter", c)
return nil
}
return out
}
func (f *Interface) rejectInside(packet []byte, out []byte, q int) {
@@ -446,27 +388,33 @@ func (f *Interface) prepareSendVia(via *HostInfo,
nb,
out []byte,
nocopy bool,
c uint64,
) ([]byte, error) {
if noiseutil.EncryptLockNeeded {
// A nonzero c was reserved by the caller, who also did the connection manager bookkeeping
reserved := c != 0
locked := !reserved && noiseutil.EncryptLockNeeded
if locked {
// NOTE: for goboring AESGCMTLS we need to lock because of the nonce check
via.ConnectionState.writeLock.Lock()
}
c, ok := via.ConnectionState.NextMessageCounter()
if !ok {
if noiseutil.EncryptLockNeeded {
via.ConnectionState.writeLock.Unlock()
if !reserved {
var ok bool
c, ok = via.ConnectionState.NextMessageCounter()
if !ok {
if locked {
via.ConnectionState.writeLock.Unlock()
}
f.dropExhausted(via, c, "Dropping outbound relay packets, tunnel message counter is exhausted")
return nil, fmt.Errorf("tunnel message counter is exhausted")
}
f.dropExhausted(via, c, "Dropping outbound relay packets, tunnel message counter is exhausted")
return nil, fmt.Errorf("tunnel message counter is exhausted")
f.connectionManager.OutNoRebind(via)
}
out = header.Encode(out, header.Version, header.Message, header.MessageRelay, relay.RemoteIndex, c)
f.connectionManager.OutNoRebind(via)
// Authenticate the header and payload, but do not encrypt for this message type.
// The payload consists of the inner, unencrypted Nebula header, as well as the end-to-end encrypted payload.
if len(out)+len(ad)+via.ConnectionState.eKey.Overhead() > cap(out) {
if noiseutil.EncryptLockNeeded {
if locked {
via.ConnectionState.writeLock.Unlock()
}
via.logger(f.l).Error("SendVia out buffer not large enough for relay",
@@ -490,14 +438,16 @@ func (f *Interface) prepareSendVia(via *HostInfo,
var err error
out, err = via.ConnectionState.eKey.EncryptDanger(out, out, nil, c, nb)
if noiseutil.EncryptLockNeeded {
if locked {
via.ConnectionState.writeLock.Unlock()
}
if err != nil {
via.logger(f.l).Info("Failed to EncryptDanger in sendVia", "error", err)
return nil, err
}
f.connectionManager.RelayUsed(relay.LocalIndex)
if !reserved {
f.connectionManager.RelayUsed(relay.LocalIndex)
}
return out, nil
}
@@ -510,7 +460,7 @@ func (f *Interface) prepareSendVia(via *HostInfo,
// out is a buffer used to store the result of the Encrypt operation
// q indicates which writer to use to send the packet.
func (f *Interface) SendVia(via *HostInfo, relay *Relay, ad, nb, out []byte, nocopy bool, q int) {
toSend, err := f.prepareSendVia(via, relay, ad, nb, out, nocopy)
toSend, err := f.prepareSendVia(via, relay, ad, nb, out, nocopy, 0)
if err != nil {
// already logged by prepareSendVia
return
@@ -564,34 +514,19 @@ func (f *Interface) sendNoMetrics(t header.MessageType, st header.MessageSubType
return
}
//l.WithField("trace", string(debug.Stack())).Error("out Header ", &Header{Version, t, st, 0, hostinfo.remoteIndexId, c}, p)
out = header.Encode(out, header.Version, t, st, hostinfo.remoteIndexId, c)
// A closing tunnel is torn down right after this, so skip the connection manager entirely: no point recording
// traffic or asking the lighthouse for a punch. Otherwise, if we rebound since this tunnel last sent, ask the
// lighthouse to get the far side punching at us again.
if t != header.CloseTunnel && f.connectionManager.Out(hostinfo) {
f.lightHouse.QueryServer(hostinfo.vpnAddrs[0])
if f.l.Enabled(context.Background(), slog.LevelDebug) {
f.l.Debug("Lighthouse update triggered for punch due to rebind epoch",
"vpnAddrs", hostinfo.vpnAddrs,
)
}
// A closing tunnel needs neither traffic tracking nor another punch.
if t != header.CloseTunnel {
f.recordOutbound(hostinfo)
}
var err error
out, err = ci.eKey.EncryptDanger(out, out, p, c, nb)
out = f.encryptMessage(t, st, hostinfo, ci, c, p, nb, out, remote)
if noiseutil.EncryptLockNeeded {
ci.writeLock.Unlock()
}
if err != nil {
hostinfo.logger(f.l).Error("Failed to encrypt outgoing packet",
"error", err,
"udpAddr", remote,
"counter", c,
)
if out == nil {
return
}
var err error
if remote.IsValid() {
err = f.writers[q].WriteTo(out, remote)
if err != nil {
@@ -613,19 +548,8 @@ func (f *Interface) sendNoMetrics(t header.MessageType, st header.MessageSubType
}
}
} else {
// Try to send via a relay
for _, relayIP := range hostinfo.relayState.CopyRelayIps() {
relayHostInfo, relay, err := f.hostMap.QueryVpnAddrsRelayFor(hostinfo.vpnAddrs, relayIP)
if err != nil {
hostinfo.relayState.DeleteRelay(relayIP)
hostinfo.logger(f.l).Info("sendNoMetrics failed to find HostInfo",
"relay", relayIP,
"error", err,
)
continue
}
f.SendVia(relayHostInfo, relay, out, nb, fullOut[:header.Len+len(out)], true, q)
break
if via, relay := f.findRelay(hostinfo); via != nil && relay != nil {
f.SendVia(via, relay, out, nb, fullOut[:header.Len+len(out)], true, q)
}
}
}
+180
View File
@@ -0,0 +1,180 @@
package nebula
import (
"net/netip"
"testing"
"time"
"github.com/gaissmai/bart"
"github.com/slackhq/nebula/cert"
"github.com/slackhq/nebula/firewall"
"github.com/slackhq/nebula/header"
"github.com/slackhq/nebula/overlay/batch"
"github.com/slackhq/nebula/overlay/overlaytest"
"github.com/slackhq/nebula/overlay/tio"
"github.com/slackhq/nebula/udp"
"github.com/stretchr/testify/assert"
"github.com/stretchr/testify/require"
)
func newInsideFilterTestInterface(t *testing.T, allow bool) (*Interface, *HostInfo, *capturingTun) {
t.Helper()
local := netip.MustParseAddr("192.0.2.1")
remote := netip.MustParseAddr("192.0.2.2")
f, tun := newSelfForwardInterface(local)
f.inside = overlaytest.NoopTun{}
f.myVpnNetworksTable = &bart.Lite{}
f.myVpnNetworksTable.Insert(netip.MustParsePrefix("192.0.2.0/24"))
f.myBroadcastAddrsTable.Insert(netip.MustParsePrefix("192.0.2.255/32"))
f.dropLocalBroadcast, f.dropMulticast = true, true
localCert := &dummyCert{version: cert.Version1, networks: []netip.Prefix{netip.PrefixFrom(local, 24)}}
peerCert := &dummyCert{version: cert.Version1, networks: []netip.Prefix{netip.PrefixFrom(remote, 24)}}
f.firewall = NewFirewall(f.l, time.Minute, time.Minute, time.Minute, localCert)
if allow {
require.NoError(t, f.firewall.AddRule(false, firewall.ProtoAny, 0, 0, []string{"any"}, "", "", "", "", ""))
}
f.pki = &PKI{}
f.pki.caPool.Store(cert.NewCAPool())
f.hostMap = newHostMap(f.l)
f.lightHouse = newTestLighthouse()
f.lightHouse.amLighthouse = true // Keep destination lookup from probing other remotes.
f.handshakeManager = NewHandshakeManager(f.l, f.hostMap, f.lightHouse, udp.NoopConn{}, defaultHandshakeConfig)
f.handshakeManager.f = f
f.connectionManager = &connectionManager{intf: f}
h := &HostInfo{
vpnAddrs: []netip.Addr{remote},
ConnectionState: &ConnectionState{
peerCert: &cert.CachedCertificate{Certificate: peerCert},
},
}
f.hostMap.Hosts[remote] = h
return f, h, tun
}
func TestFilterInsidePacket(t *testing.T) {
local := netip.MustParseAddr("192.0.2.1")
remote := netip.MustParseAddr("192.0.2.2")
for _, tt := range []struct {
name string
packet []byte
allow bool
reject bool
ready bool
writes int
}{
{name: "allowed", packet: buildIPv4(local, remote, tcpSyn), allow: true, ready: true},
{name: "malformed", packet: []byte{0x45}, allow: true},
{name: "broadcast", packet: buildIPv4(local, netip.MustParseAddr("192.0.2.255"), udpDatagram), allow: true},
{name: "multicast", packet: buildIPv4(local, netip.MustParseAddr("224.0.0.1"), udpDatagram), allow: true},
{name: "firewall drop", packet: buildIPv4(local, remote, tcpSyn)},
{name: "firewall reject", packet: buildIPv4(local, remote, tcpSyn), reject: true, writes: 1},
{name: "unroutable drop", packet: buildIPv4(local, netip.MustParseAddr("198.51.100.1"), tcpSyn), allow: true},
{name: "unroutable reject", packet: buildIPv4(local, netip.MustParseAddr("198.51.100.1"), tcpSyn), allow: true, reject: true, writes: 1},
} {
t.Run(tt.name, func(t *testing.T) {
f, h, tun := newInsideFilterTestInterface(t, tt.allow)
f.firewall.OutboundSendReject = tt.reject
fp := &firewall.ParsedPacket{}
got := f.filterInsidePacket(tio.Packet{Bytes: tt.packet}, fp, make([]byte, mtu), 0, nil)
if tt.ready {
require.Same(t, h, got)
assert.Equal(t, local, fp.LocalAddr)
assert.Equal(t, remote, fp.RemoteAddr)
} else {
require.Nil(t, got)
}
assert.Zero(t, h.ConnectionState.messageCounter.Load(), "filtering must not allocate encryption counters")
assert.False(t, h.sentSinceCheck(), "filtering must not mark outbound traffic")
require.Len(t, tun.writes, tt.writes)
if tt.writes > 0 {
require.GreaterOrEqual(t, len(tun.writes[0]), 40)
assert.Equal(t, tt.packet[16:20], tun.writes[0][12:16])
assert.Equal(t, tt.packet[12:16], tun.writes[0][16:20])
assert.NotZero(t, tun.writes[0][33]&0x04, "reject must carry a TCP reset")
}
})
}
}
func TestFilterInsidePacketSelf(t *testing.T) {
local := netip.MustParseAddr("192.0.2.1")
f, _, tun := newInsideFilterTestInterface(t, true)
pkt := buildIPv4(local, local, tcpSyn)
require.Nil(t, f.filterInsidePacket(tio.Packet{Bytes: pkt}, &firewall.ParsedPacket{}, nil, 0, nil))
if immediatelyForwardToSelf {
require.Len(t, tun.writes, 1)
assert.Equal(t, pkt, tun.writes[0])
} else {
assert.Empty(t, tun.writes)
}
}
func TestFilterInsidePacketPendingHandshake(t *testing.T) {
f, h, tun := newInsideFilterTestInterface(t, true)
remote := h.vpnAddrs[0]
delete(f.hostMap.Hosts, remote)
hh := &HandshakeHostInfo{hostinfo: h}
f.handshakeManager.vpnIps[remote] = hh
pkt := buildIPv4(netip.MustParseAddr("192.0.2.1"), remote, udpDatagram)
want := append([]byte(nil), pkt...)
require.Nil(t, f.filterInsidePacket(tio.Packet{Bytes: pkt}, &firewall.ParsedPacket{}, nil, 0, nil))
require.Len(t, hh.packetStore, 1)
clear(pkt)
assert.Equal(t, want, hh.packetStore[0].packet, "the handshake cache must own its packet")
assert.Equal(t, header.Message, hh.packetStore[0].messageType)
assert.Empty(t, tun.writes)
assert.Zero(t, h.ConnectionState.messageCounter.Load())
}
type insideFilterConn struct {
udp.NoopConn
packets [][]byte
}
func (c *insideFilterConn) WriteBatch(bufs [][]byte, _ []netip.AddrPort) (int, error) {
for _, b := range bufs {
c.packets = append(c.packets, append([]byte(nil), b...))
}
return len(bufs), nil
}
func TestConsumeInsidePacketFilterAndSend(t *testing.T) {
for _, allow := range []bool{false, true} {
t.Run(map[bool]string{false: "denied", true: "allowed"}[allow], func(t *testing.T) {
f, h, _ := newInsideFilterTestInterface(t, allow)
initR, respR := runTestHandshake(t)
ci, err := newConnectionStateFromResult(initR)
require.NoError(t, err)
rci, err := newConnectionStateFromResult(respR)
require.NoError(t, err)
ci.peerCert = h.ConnectionState.peerCert
h.ConnectionState = ci
h.remoteIndexId = 100
remote := netip.MustParseAddrPort("198.51.100.2:4242")
h.remote.Store(&remote)
conn := &insideFilterConn{}
sb := batch.NewSendBatch(conn, 1, mtu)
pkt := buildIPv4(netip.MustParseAddr("192.0.2.1"), h.vpnAddrs[0], udpDatagram)
before := ci.messageCounter.Load()
f.consumeInsidePacket(tio.Packet{Bytes: pkt}, &firewall.ParsedPacket{}, make([]byte, 12), sb, nil, 0, nil)
_, err = sb.Flush()
require.NoError(t, err)
if !allow {
assert.Empty(t, conn.packets)
assert.Equal(t, before, ci.messageCounter.Load())
assert.False(t, h.sentSinceCheck())
return
}
require.Len(t, conn.packets, 1)
assert.True(t, h.sentSinceCheck())
hdr := &header.H{}
require.NoError(t, hdr.Parse(conn.packets[0]))
assert.Equal(t, header.Message, hdr.Type)
assert.Equal(t, h.remoteIndexId, hdr.RemoteIndex)
assert.Equal(t, before+1, hdr.MessageCounter)
plain, err := rci.Decrypt(f.l, hdr.MessageCounter, conn.packets[0], make([]byte, 12))
require.NoError(t, err)
assert.Equal(t, pkt, plain)
})
}
}
+62 -37
View File
@@ -57,17 +57,19 @@ type InterfaceConfig struct {
// CpuAffinity, when non-empty, names the CPUs each TUN reader goroutine
// should pin to. Queue i pins to CpuAffinity[i % len(CpuAffinity)] —
// shorter lists than `routines` cycle. Empty list keeps the default
// pin-to-(i % NumCPU) behavior. Only consulted when PinThreads is true.
// shorter lists than `routines` cycle. Staged sender i uses entry i+1,
// unless that is its reader's CPU. Empty uses the automatic order. Only
// consulted when PinThreads is true.
CpuAffinity []int
// AvoidCPUs (tun.avoid_cpus) lists CPUs the default pin spread skips when
// CpuAffinity is empty. Only consulted when PinThreads is true.
AvoidCPUs []int
// defaultCpuAffinity is the automatic pin order for readers, kept apart
// from CpuAffinity because staged senders are only pinned to an explicit list.
defaultCpuAffinity []int
// PinThreads controls whether each TUN reader OS thread is pinned to a
// single CPU (via tun.pin_threads, default true). Pinning keeps each
// goroutine's sendmmsg on one XPS-selected NIC TX ring so per-flow
// packets stay ordered on the wire.
PinThreads bool
staged stagedConfig
l *slog.Logger
}
@@ -97,13 +99,13 @@ type Interface struct {
// should pin to. Queue i pins to cpuAffinity[i % len(cpuAffinity)].
// Empty falls back to the default pin-to-(allowed CPU) behavior.
// Only consulted when pinThreads is true.
cpuAffinity []int
// avoidCPUs are removed from that fallback spread, unless they would empty it.
avoidCPUs []int
cpuAffinity []int
defaultCpuAffinity []int
// pinThreads controls whether listenIn pins each TUN reader OS thread to
// a CPU at all (tun.pin_threads, default true). When false, threads are
// left free to migrate as on stock nebula.
pinThreads bool
staged stagedConfig
relayManager *relayManager
tryPromoteEvery atomic.Uint32
@@ -252,8 +254,9 @@ func NewInterface(ctx context.Context, c *InterfaceConfig) (*Interface, error) {
connectionManager: c.connectionManager,
conntrackCacheTimeout: c.ConntrackCacheTimeout,
cpuAffinity: c.CpuAffinity,
avoidCPUs: c.AvoidCPUs,
defaultCpuAffinity: c.defaultCpuAffinity,
pinThreads: c.PinThreads,
staged: c.staged,
udpTxErrLimiter: udpTxErrLimiter,
udpRelayTxErrLimiter: udpRelayTxErrLimiter,
txOversizeLimiter: txOversizeLimiter,
@@ -419,14 +422,18 @@ func (f *Interface) listenOut(i int) {
f.readOutsidePackets(ViaSender{UdpAddr: fromUdpAddr}, payload, rxc)
}
flusher := func() {
if err := f.batchers[i].Flush(); err != nil {
f.l.Error("Failed to flush tun coalescer", "error", err)
}
clear(rxc.hostmapCache)
}
flusher := func() { f.flushOutside(rxc) }
err := li.ListenOut(listener, flusher)
var err error
if hc, ok := li.(handoffConn); ok && f.staged.rx {
// Every stage on its own goroutine, see flow_rx.go. rxc becomes the ordered writer's context.
err = newStagedRx(f, i, rxc).listen(hc)
} else {
if f.staged.rx {
f.l.Info("udp conn cannot hand off receive batches, receive stays inline", "reader", i)
}
err = li.ListenOut(listener, flusher)
}
// An error after teardown began is shutdown noise, the closed flag covers resources
// Close releases itself and the cancelled ctx covers ones torn down by their owners
@@ -439,34 +446,30 @@ func (f *Interface) listenOut(i int) {
f.l.Debug("underlay reader is done", "reader", i)
}
func (f *Interface) pinThisThread(i int) {
var cpu int
// threadCPU is the CPU tun reader i pins to.
func (f *Interface) threadCPU(i int) int {
if n := len(f.cpuAffinity); n > 0 {
// Explicit tun.cpu_affinity list wins; parseCpuAffinity already
// validated the entries against the allowed CPU set and tun.avoid_cpus.
cpu = f.cpuAffinity[i%n]
// validated the entries against the allowed CPU set.
return f.cpuAffinity[i%n]
} else if n := len(f.defaultCpuAffinity); n > 0 {
return f.defaultCpuAffinity[i%n]
} else if allowed, err := util.AllowedCPUs(); err == nil && len(allowed) > 0 {
// Default: spread queues across the CPUs we're actually allowed to
// run on. Under a cpuset/taskset mask these aren't 0..NumCPU-1, so
// i % NumCPU would pick unrunnable IDs and every pin would fail.
// parseAvoidCPUs already dropped an avoid list that covers them all.
allowed = slices.DeleteFunc(allowed, func(c int) bool { return slices.Contains(f.avoidCPUs, c) })
cpu = allowed[i%len(allowed)]
} else {
cpu = i % runtime.NumCPU()
return allowed[i%len(allowed)]
}
return i % runtime.NumCPU()
}
func (f *Interface) pinThreadToCPU(i, cpu int) {
if err := util.PinThreadToCPU(cpu); err != nil {
f.l.Warn("failed to pin tun reader to CPU", "queue", i, "cpu", cpu, "err", err)
f.l.Warn("failed to pin tun processing thread to CPU", "queue", i, "cpu", cpu, "err", err)
}
}
func (f *Interface) listenIn(queue tio.Queue, i int) {
// Pinning this thread (and goroutine) to a single CPU keeps every sendmmsg from this goroutine going through the
// same TX ring on the nic, so the wire sees per-flow order. Skip entirely when tun.pin_threads is false.
if f.pinThreads {
f.pinThisThread(i)
}
rejectBuf := make([]byte, mtu)
arenaSize := batch.SendBatchCap * (udp.MTU + 32)
sb := batch.NewSendBatch(f.writers[i], batch.SendBatchCap, arenaSize)
@@ -475,6 +478,26 @@ func (f *Interface) listenIn(queue tio.Queue, i int) {
conntrackCache := firewall.NewConntrackCacheTicker(f.ctx, f.l, f.conntrackCacheTimeout)
if sq, ok := queue.(handoffQueue); ok && f.staged.tx {
// Every stage on its own goroutine, see flow_tx.go
err := newStagedTx(f, sq, i).run(fwPacket, rejectBuf, conntrackCache)
if !f.closed.Load() && f.ctx.Err() == nil {
f.l.Error("Error while reading outbound packet, closing", "error", err, "reader", i)
f.onFatal(err)
}
f.l.Debug("overlay reader is done", "reader", i)
return
}
if f.staged.tx {
f.l.Info("tun queue cannot hand off read batches, transmit stays inline", "reader", i)
}
// Pinning this thread (and goroutine) to a single CPU keeps every sendmmsg from this goroutine going through the
// same TX ring on the nic, so the wire sees per-flow order. Skip entirely when tun.pin_threads is false.
if f.pinThreads {
f.pinThreadToCPU(i, f.threadCPU(i))
}
for {
pkts, err := queue.Read()
if err != nil {
@@ -517,10 +540,11 @@ func (f *Interface) flushSendBatch(sb *batch.SendBatch, q int) {
func (f *Interface) RegisterConfigChangeCallbacks(c *config.C) {
c.RegisterReloadCallback(f.reloadFirewall)
c.RegisterReloadCallback(f.reloadSendRecvError)
c.RegisterReloadCallback(f.reloadAcceptRecvError)
c.RegisterReloadCallback(f.reloadDisconnectInvalid)
c.RegisterReloadCallback(f.reloadMisc)
for _, reload := range []func(*config.C){
f.reloadSendRecvError, f.reloadAcceptRecvError, f.reloadDisconnectInvalid, f.reloadMisc,
} {
c.RegisterReloadCallback(func(c *config.C, _ *config.Reload) { reload(c) })
}
for _, udpConn := range f.writers {
c.RegisterReloadCallback(udpConn.ReloadConfig)
@@ -537,7 +561,7 @@ func (f *Interface) reloadDisconnectInvalid(c *config.C) {
}
}
func (f *Interface) reloadFirewall(c *config.C) {
func (f *Interface) reloadFirewall(c *config.C, r *config.Reload) {
cs := f.pki.getCertState()
curCert := cs.getCertificate(cert.Version2)
if curCert == nil {
@@ -556,6 +580,7 @@ func (f *Interface) reloadFirewall(c *config.C) {
fw, err := NewFirewallFromConfig(f.l, cs, c)
if err != nil {
f.l.Error("Error while creating firewall during reload", "error", err)
r.Failed()
return
}
+23 -21
View File
@@ -7,7 +7,6 @@ import (
"github.com/slackhq/nebula/cert"
"github.com/slackhq/nebula/config"
"github.com/slackhq/nebula/test"
"github.com/slackhq/nebula/util"
"github.com/stretchr/testify/assert"
"github.com/stretchr/testify/require"
)
@@ -66,10 +65,10 @@ func TestReloadFirewall_CertUnsafeNetworksChanged(t *testing.T) {
pki.cs.Store(&CertState{v2Cert: c2, initiatingVersion: cert.Version2})
// Reload with the same YAML so HasChanged("firewall") reports false.
require.NoError(t, cfg.ReloadConfigString(rawYAML))
require.NoError(t, cfg.ReloadConfigString(rawYAML).Err)
require.False(t, cfg.HasChanged("firewall"))
f.reloadFirewall(cfg)
f.reloadFirewall(cfg, nil)
assert.NotSame(t, fw, f.firewall, "firewall pointer should have been replaced")
assert.Equal(t, newUnsafe, f.firewall.unsafeNetworks)
@@ -114,27 +113,30 @@ func TestReloadFirewall_NoChange(t *testing.T) {
l: l,
}
require.NoError(t, cfg.ReloadConfigString(rawYAML))
f.reloadFirewall(cfg)
require.NoError(t, cfg.ReloadConfigString(rawYAML).Err)
f.reloadFirewall(cfg, nil)
assert.Same(t, fw, f.firewall, "firewall should not have been replaced")
}
// TestPinThisThreadFallbackSkipsAvoided covers the single reader, which never goes through cpupick: its fallback
// spread over the allowed set must still skip tun.avoid_cpus.
func TestPinThisThreadFallbackSkipsAvoided(t *testing.T) {
allowed, err := util.AllowedCPUs()
require.NoError(t, err)
if len(allowed) < 2 {
t.Skip("requires at least two allowed CPUs")
// Rules that don't parse keep the old firewall, and the reload says it could not apply them
func TestReloadFirewall_BadRulesFailTheReload(t *testing.T) {
l := test.NewLogger()
pki := &PKI{}
pki.cs.Store(&CertState{v2Cert: &dummyCert{version: cert.Version2, networks: []netip.Prefix{netip.MustParsePrefix("10.0.0.1/24")}}, initiatingVersion: cert.Version2})
rules := func(proto string) string {
return "firewall:\n outbound:\n - port: any\n proto: any\n host: any\n inbound:\n - port: any\n proto: " + proto + "\n host: any\n"
}
f := &Interface{l: test.NewLogger(), pinThreads: true, avoidCPUs: []int{allowed[0]}}
got := make(chan []int)
go func() {
// The pin leaves this goroutine locked to its thread, so the runtime discards the thread when it returns.
f.pinThisThread(0)
cpus, _ := util.AllowedCPUs()
got <- cpus
}()
assert.Equal(t, []int{allowed[1]}, <-got)
cfg := config.NewC(l)
require.NoError(t, cfg.LoadString(rules("any")))
fw, err := NewFirewallFromConfig(l, pki.getCertState(), cfg)
require.NoError(t, err)
f := &Interface{pki: pki, firewall: fw, l: l}
cfg.RegisterReloadCallback(f.reloadFirewall)
res := cfg.ReloadConfigString(rules("nope"))
require.NoError(t, res.Err)
assert.True(t, res.Failed)
assert.Same(t, fw, f.firewall)
}
+10 -4
View File
@@ -138,18 +138,21 @@ func NewLightHouseFromConfig(ctx context.Context, l *slog.Logger, c *config.C, c
h.metrics = newLighthouseMetrics()
}
err := h.reload(c, true)
err := h.reload(c, true, nil)
if err != nil {
return nil, err
}
c.RegisterReloadCallback(func(c *config.C) {
err := h.reload(c, false)
c.RegisterReloadCallback(func(c *config.C, r *config.Reload) {
r.RestartRequiredIfChanged("lighthouse.am_lighthouse", "listen.port", "handshakes.query_buffer", "stats.lighthouse_metrics")
err := h.reload(c, false, r)
switch v := err.(type) {
case *util.ContextualError:
v.Log(l)
r.Failed()
case error:
l.Error("failed to reload lighthouse", "error", err)
r.Failed()
}
})
@@ -190,7 +193,8 @@ func (lh *LightHouse) GetUpdateInterval() int64 {
return lh.interval.Load()
}
func (lh *LightHouse) reload(c *config.C, initial bool) error {
// r is nil on the initial load
func (lh *LightHouse) reload(c *config.C, initial bool, r *config.Reload) error {
if initial || c.HasChanged("lighthouse.advertise_addrs") {
rawAdvAddrs := c.GetStringSlice("lighthouse.advertise_addrs", []string{})
advAddrs := make([]netip.AddrPort, 0)
@@ -225,6 +229,7 @@ func (lh *LightHouse) reload(c *config.C, initial bool) error {
"addr", rawAddr,
"entry", i+1,
)
r.Failed()
continue
}
@@ -383,6 +388,7 @@ func (lh *LightHouse) reload(c *config.C, initial bool) error {
"relay", v,
"error", err,
)
r.Failed()
} else {
lh.l.Info("Read relay from config", "relay", v)
relaysForMe = append(relaysForMe, configRIP)
+59 -14
View File
@@ -87,15 +87,15 @@ func TestReloadLighthouseInterval(t *testing.T) {
lh.ifce = &mockEncWriter{}
// The first one routine is kicked off by main.go currently, lets make sure that one dies
require.NoError(t, c.ReloadConfigString("lighthouse:\n interval: 5"))
require.NoError(t, c.ReloadConfigString("lighthouse:\n interval: 5").Err)
assert.Equal(t, int64(5), lh.interval.Load())
// Subsequent calls are killed off by the LightHouse.Reload function
require.NoError(t, c.ReloadConfigString("lighthouse:\n interval: 10"))
require.NoError(t, c.ReloadConfigString("lighthouse:\n interval: 10").Err)
assert.Equal(t, int64(10), lh.interval.Load())
// If this completes then nothing is stealing our reload routine
require.NoError(t, c.ReloadConfigString("lighthouse:\n interval: 11"))
require.NoError(t, c.ReloadConfigString("lighthouse:\n interval: 11").Err)
assert.Equal(t, int64(11), lh.interval.Load())
}
@@ -296,7 +296,7 @@ func TestLighthouse_reload(t *testing.T) {
require.NoError(t, err)
c.ReloadConfigString(string(rc))
err = lh.reload(c, false)
err = lh.reload(c, false, nil)
require.NoError(t, err)
}
@@ -334,7 +334,7 @@ func TestLighthouse_reloadStaticHostMap(t *testing.T) {
}
rc, err := yaml.Marshal(nc)
require.NoError(t, err)
require.NoError(t, c.ReloadConfigString(string(rc)))
require.NoError(t, c.ReloadConfigString(string(rc)).Err)
rl := lh.Query(staticHost)
require.NotNil(t, rl)
@@ -350,7 +350,7 @@ func TestLighthouse_reloadStaticHostMap(t *testing.T) {
}
rc, err = yaml.Marshal(nc)
require.NoError(t, err)
require.NoError(t, c.ReloadConfigString(string(rc)))
require.NoError(t, c.ReloadConfigString(string(rc)).Err)
rl = lh.Query(staticHost)
require.NotNil(t, rl)
@@ -358,7 +358,7 @@ func TestLighthouse_reloadStaticHostMap(t *testing.T) {
assert.Equal(t, []netip.AddrPort{netip.MustParseAddrPort("1.1.1.1:4242")}, rl.CopyAddrs([]netip.Prefix{}))
// Reload with the same config. An unchanged entry must not duplicate.
require.NoError(t, c.ReloadConfigString(string(rc)))
require.NoError(t, c.ReloadConfigString(string(rc)).Err)
rl = lh.Query(staticHost)
require.NotNil(t, rl)
@@ -373,7 +373,7 @@ func TestLighthouse_reloadStaticHostMap(t *testing.T) {
}
rc, err = yaml.Marshal(nc)
require.NoError(t, err)
require.NoError(t, c.ReloadConfigString(string(rc)))
require.NoError(t, c.ReloadConfigString(string(rc)).Err)
// Add a second host alongside the first. Both should be present, neither duplicated.
nc = map[string]any{
@@ -384,7 +384,7 @@ func TestLighthouse_reloadStaticHostMap(t *testing.T) {
}
rc, err = yaml.Marshal(nc)
require.NoError(t, err)
require.NoError(t, c.ReloadConfigString(string(rc)))
require.NoError(t, c.ReloadConfigString(string(rc)).Err)
rl = lh.Query(staticHost)
require.NotNil(t, rl)
@@ -406,7 +406,7 @@ func TestLighthouse_reloadStaticHostMap(t *testing.T) {
}
rc, err = yaml.Marshal(nc)
require.NoError(t, err)
require.NoError(t, c.ReloadConfigString(string(rc)))
require.NoError(t, c.ReloadConfigString(string(rc)).Err)
_, isStatic := lh.GetStaticHostList()[staticHost]
assert.False(t, isStatic)
@@ -966,13 +966,13 @@ func TestLighthouse_reloadRelaysTriggersUpdate(t *testing.T) {
require.NoError(t, err)
assert.Empty(t, lh.updateTrigger)
require.NoError(t, c.ReloadConfigString(base+"relay:\n relays: [10.128.0.6]\n"))
require.NoError(t, c.ReloadConfigString(base+"relay:\n relays: [10.128.0.6]\n").Err)
assert.Equal(t, []netip.Addr{netip.MustParseAddr("10.128.0.6")}, lh.GetRelaysForMe())
require.Len(t, lh.updateTrigger, 1)
<-lh.updateTrigger
// The config changed but what we advertise did not, a bad entry is skipped
require.NoError(t, c.ReloadConfigString(base+"relay:\n relays: [10.128.0.6, nope]\n"))
require.NoError(t, c.ReloadConfigString(base+"relay:\n relays: [10.128.0.6, nope]\n").Err)
assert.Equal(t, []netip.Addr{netip.MustParseAddr("10.128.0.6")}, lh.GetRelaysForMe())
assert.Empty(t, lh.updateTrigger)
}
@@ -988,12 +988,57 @@ func TestLighthouse_reloadAmRelayAlone(t *testing.T) {
assert.Equal(t, []netip.Addr{netip.MustParseAddr("10.128.0.5")}, lh.GetRelaysForMe())
// Relays aren't allowed to have relays, flipping am_relay alone must drop them and tell the lighthouses
require.NoError(t, c.ReloadConfigString(base+" am_relay: true\n"))
require.NoError(t, c.ReloadConfigString(base+" am_relay: true\n").Err)
assert.Empty(t, lh.GetRelaysForMe())
require.Len(t, lh.updateTrigger, 1)
<-lh.updateTrigger
require.NoError(t, c.ReloadConfigString(base+" am_relay: false\n"))
require.NoError(t, c.ReloadConfigString(base+" am_relay: false\n").Err)
assert.Equal(t, []netip.Addr{netip.MustParseAddr("10.128.0.5")}, lh.GetRelaysForMe())
require.Len(t, lh.updateTrigger, 1)
}
func TestLighthouse_reloadRestartRequired(t *testing.T) {
l := test.NewLogger()
c := config.NewC(l)
base := "lighthouse:\n am_lighthouse: true\n"
require.NoError(t, c.LoadString(base+"listen:\n port: 4242\n"))
_, err := NewLightHouseFromConfig(t.Context(), l, c, testCertState(netip.MustParsePrefix("10.128.0.1/24")), nil, nil)
require.NoError(t, err)
res := c.ReloadConfigString(base + "listen:\n port: 4242\n")
require.NoError(t, res.Err)
assert.False(t, res.RestartRequired)
res = c.ReloadConfigString(base + "listen:\n port: 4243\n")
require.NoError(t, res.Err)
assert.True(t, res.RestartRequired)
}
// A relay that doesn't parse is skipped and the rest are used, the reload says one was skipped
func TestLighthouse_reloadBadRelayFails(t *testing.T) {
l := test.NewLogger()
c := config.NewC(l)
require.NoError(t, c.LoadString("listen:\n port: 4242\n"))
lh, err := NewLightHouseFromConfig(t.Context(), l, c, testCertState(netip.MustParsePrefix("10.128.0.1/24")), nil, nil)
require.NoError(t, err)
res := c.ReloadConfigString("listen:\n port: 4242\nrelay:\n relays: [10.128.0.2, nope]\n")
require.NoError(t, res.Err)
assert.True(t, res.Failed)
assert.Equal(t, []netip.Addr{netip.MustParseAddr("10.128.0.2")}, lh.GetRelaysForMe())
}
// An advertise_addrs entry inside our own network is skipped and the rest are used, the reload says one was skipped
func TestLighthouse_reloadAdvertiseAddrInNetworkFails(t *testing.T) {
l := test.NewLogger()
c := config.NewC(l)
require.NoError(t, c.LoadString("listen:\n port: 4242\n"))
lh, err := NewLightHouseFromConfig(t.Context(), l, c, testCertState(netip.MustParsePrefix("10.128.0.1/24")), nil, nil)
require.NoError(t, err)
res := c.ReloadConfigString("listen:\n port: 4242\nlighthouse:\n advertise_addrs: [\"1.2.3.4:4242\", \"10.128.0.5:4242\"]\n")
require.NoError(t, res.Err)
assert.True(t, res.Failed)
assert.Equal(t, []netip.AddrPort{netip.MustParseAddrPort("1.2.3.4:4242")}, lh.GetAdvertiseAddrs())
}
+22 -54
View File
@@ -78,7 +78,7 @@ func Main(c *config.C, configTest bool, buildVersion string, l *slog.Logger, dev
wireSSHReload(l, ssh, c)
var sshStart func()
if c.GetBool("sshd.enabled", false) {
sshStart, err = configSSH(l, ssh, c)
sshStart, err = configSSH(l, ssh, c, nil)
if err != nil {
l.Warn("Failed to configure sshd, ssh debugging will not be available", "error", err)
sshStart = nil
@@ -197,7 +197,7 @@ func Main(c *config.C, configTest bool, buildVersion string, l *slog.Logger, dev
if err != nil {
return nil, util.NewContextualError("Failed to open udp listener", m{"queue": i}, err)
}
udpServer.ReloadConfig(c)
udpServer.ReloadConfig(c, nil)
udpConns[i] = udpServer
// If port is dynamic, discover it before the next pass through the for loop
@@ -243,19 +243,13 @@ func Main(c *config.C, configTest bool, buildVersion string, l *slog.Logger, dev
}
pinThreads := c.GetBool("tun.pin_threads", true)
avoidCPUs := parseAvoidCPUs(c, l)
if len(avoidCPUs) > 0 && !pinThreads {
l.Warn("tun.avoid_cpus has no effect with tun.pin_threads disabled")
}
// Keeping every thread of the process off avoidCPUs, not just the pinned readers, is parked for now:
//if err := cpupick.Avoid(avoidCPUs, !configTest); err != nil && !errors.Is(err, errors.ErrUnsupported) {
// return nil, fmt.Errorf("tun.avoid_cpus: %w", err)
//}
cpuAffinity := parseCpuAffinity(c, l, routines, avoidCPUs)
cpuAffinity := parseCpuAffinity(c, l, routines)
var defaultCpuAffinity []int
staged := parseStagedConfig(c, l)
if pinThreads && routines > 1 && len(cpuAffinity) == 0 && !configTest {
// The operator didn't choose pin CPUs, so pick a default set that
// prefers performance cores, skips tun.avoid_cpus and doesn't stack
// co-located instances onto allowed[0].
// prefers performance cores and doesn't stack co-located instances
// onto allowed[0].
// key is used to seed the spreading of routines->cores.
// use PID if you want to ensure many different Nebulas in VMs or containers land on different cores
@@ -278,7 +272,7 @@ func Main(c *config.C, configTest bool, buildVersion string, l *slog.Logger, dev
l.Warn("tun.pin_threads_key is invalid, using PID")
}
cpuAffinity = cpupick.Default(routines, key, avoidCPUs, l)
defaultCpuAffinity = cpupick.Default(routines, key, l)
}
ifConfig := &InterfaceConfig{
@@ -303,8 +297,9 @@ func Main(c *config.C, configTest bool, buildVersion string, l *slog.Logger, dev
punchy: punchy,
ConntrackCacheTimeout: conntrackCacheTimeout,
CpuAffinity: cpuAffinity,
AvoidCPUs: avoidCPUs,
defaultCpuAffinity: defaultCpuAffinity,
PinThreads: pinThreads,
staged: staged,
l: l,
}
@@ -320,6 +315,16 @@ func Main(c *config.C, configTest bool, buildVersion string, l *slog.Logger, dev
lightHouse.ifce = ifce
ifce.RegisterConfigChangeCallbacks(c)
// These are only read at startup
c.RegisterReloadCallback(func(c *config.C, r *config.Reload) {
r.RestartRequiredIfChanged(
"routines", "tun.routines", "listen.routines", "firewall.conntrack.routine_cache_timeout",
"listen.port", "listen.host", "stats.message_metrics",
"handshakes.try_interval", "handshakes.retries", "handshakes.trigger_buffer",
"tun.drop_local_broadcast", "tun.drop_multicast",
)
r.RestartRequiredIfChanged(osStartupOnlyKeys...)
})
ifce.reloadDisconnectInvalid(c)
ifce.reloadSendRecvError(c)
ifce.reloadAcceptRecvError(c)
@@ -372,10 +377,8 @@ func Main(c *config.C, configTest bool, buildVersion string, l *slog.Logger, dev
// mask (util.AllowedCPUs) rather than 0..NumCPU-1: under a cgroup cpuset or
// taskset the runnable IDs are frequently not that contiguous range, and
// pinning to an unrunnable ID always fails. If the allowed set can't be
// determined we fall back to a plain non-negative check. An entry listed in
// avoid (tun.avoid_cpus) contradicts the operator's own config and is treated
// the same as any other invalid entry.
func parseCpuAffinity(c *config.C, l *slog.Logger, routines int, avoid []int) []int {
// determined we fall back to a plain non-negative check.
func parseCpuAffinity(c *config.C, l *slog.Logger, routines int) []int {
raw := c.Get("tun.cpu_affinity")
if raw == nil {
return nil
@@ -418,11 +421,6 @@ func parseCpuAffinity(c *config.C, l *slog.Logger, routines int, avoid []int) []
"index", i, "cpu", cpu, "allowed", allowed)
return nil
}
if slices.Contains(avoid, cpu) {
l.Warn("tun.cpu_affinity entry is listed in tun.avoid_cpus; ignoring affinity",
"index", i, "cpu", cpu)
return nil
}
cpus = append(cpus, cpu)
}
if len(cpus) != routines {
@@ -432,36 +430,6 @@ func parseCpuAffinity(c *config.C, l *slog.Logger, routines int, avoid []int) []
return cpus
}
// parseAvoidCPUs reads tun.avoid_cpus, a list of CPU IDs the tun readers must not be pinned to. IDs outside the
// allowed set are accepted, since one config may serve differently shaped hosts. Like tun.cpu_affinity, an invalid
// list is a warning and is ignored entirely, as is one covering every allowed CPU, which would leave nowhere to pin.
func parseAvoidCPUs(c *config.C, l *slog.Logger) []int {
raw := c.Get("tun.avoid_cpus")
if raw == nil {
return nil
}
values, ok := raw.([]any)
if !ok {
l.Warn("tun.avoid_cpus must be a list of integers; ignoring", "value", raw)
return nil
}
cpus := make([]int, 0, len(values))
for i, value := range values {
cpu, ok := value.(int)
if !ok || cpu < 0 {
l.Warn("tun.avoid_cpus entry not a non-negative integer; ignoring avoid_cpus", "index", i, "value", value)
return nil
}
cpus = append(cpus, cpu)
}
if allowed, err := util.AllowedCPUs(); err == nil && len(allowed) > 0 &&
!slices.ContainsFunc(allowed, func(cpu int) bool { return !slices.Contains(cpus, cpu) }) {
l.Warn("tun.avoid_cpus covers every allowed CPU; ignoring avoid_cpus", "cpus", cpus, "allowed", allowed)
return nil
}
return cpus
}
func moduleVersion() string {
info, ok := debug.ReadBuildInfo()
if !ok {
+6
View File
@@ -0,0 +1,6 @@
//go:build linux && !android && !e2e_testing
package nebula
// osStartupOnlyKeys are startup only keys that only matter on linux: udp batch size, udp offloads and thread pinning
var osStartupOnlyKeys = []string{"listen.batch", "listen.udp_offloads", "tun.pin_threads", "tun.pin_threads_key", "tun.cpu_affinity"}
+6
View File
@@ -0,0 +1,6 @@
//go:build !linux || android || e2e_testing
package nebula
// osStartupOnlyKeys is empty, none of the OS specific startup keys matter here
var osStartupOnlyKeys []string
+74 -36
View File
@@ -5,12 +5,14 @@ import (
"net/netip"
"os"
"path/filepath"
"runtime"
"testing"
"time"
"github.com/slackhq/nebula/cert"
cert_test "github.com/slackhq/nebula/cert_test"
"github.com/slackhq/nebula/config"
"github.com/slackhq/nebula/noiseutil"
"github.com/slackhq/nebula/test"
"github.com/slackhq/nebula/util"
"github.com/stretchr/testify/assert"
@@ -32,7 +34,7 @@ func TestParseCpuAffinity(t *testing.T) {
}
// unset -> nil (listenIn falls back to spreading across the allowed set)
assert.Nil(t, parseCpuAffinity(newConfig(nil), l, 1, nil))
assert.Nil(t, parseCpuAffinity(newConfig(nil), l, 1))
// Pick a CPU we're actually allowed to run on so a valid list survives
// validation regardless of the host's affinity mask.
@@ -43,50 +45,19 @@ func TestParseCpuAffinity(t *testing.T) {
}
// valid list -> parsed through unchanged
assert.Equal(t, []int{validCPU, validCPU}, parseCpuAffinity(newConfig([]any{validCPU, validCPU}), l, 2, nil))
assert.Equal(t, []int{validCPU, validCPU}, parseCpuAffinity(newConfig([]any{validCPU, validCPU}), l, 2))
// a negative entry is out of range on every platform -> disables the override
assert.Nil(t, parseCpuAffinity(newConfig([]any{validCPU, -1}), l, 2, nil))
assert.Nil(t, parseCpuAffinity(newConfig([]any{validCPU, -1}), l, 2))
// a non-integer entry -> disables the override
assert.Nil(t, parseCpuAffinity(newConfig([]any{validCPU, "not-a-cpu"}), l, 2, nil))
assert.Nil(t, parseCpuAffinity(newConfig([]any{validCPU, "not-a-cpu"}), l, 2))
// a CPU id outside the allowed set -> disables the override. Only assertable
// where we can enumerate the allowed set (e.g. linux); 1<<20 is far beyond
// any representable CPU id so it can never be in the mask.
if len(allowed) > 0 {
assert.Nil(t, parseCpuAffinity(newConfig([]any{1 << 20}), l, 1, nil))
}
// an entry also listed in tun.avoid_cpus -> disables the override
assert.Nil(t, parseCpuAffinity(newConfig([]any{validCPU}), l, 1, []int{validCPU}))
}
func TestParseAvoidCPUs(t *testing.T) {
l := test.NewLogger()
for _, tc := range []struct {
value any
want []int
}{
{nil, nil}, {[]any{}, []int{}}, {[]any{1, 1 << 20}, []int{1, 1 << 20}},
{"auto", nil}, {"1,2", nil}, {[]any{-1}, nil}, {[]any{1.5}, nil}, {[]any{1, "2"}, nil},
} {
c := config.NewC(l)
if tc.value != nil {
c.Settings["tun"] = map[string]any{"avoid_cpus": tc.value}
}
assert.Equal(t, tc.want, parseAvoidCPUs(c, l), "%v", tc.value)
}
// avoiding every allowed CPU leaves nowhere to pin; only checkable where the allowed set is known
if allowed, _ := util.AllowedCPUs(); len(allowed) > 0 {
all := make([]any, len(allowed))
for i, cpu := range allowed {
all[i] = cpu
}
c := config.NewC(l)
c.Settings["tun"] = map[string]any{"avoid_cpus": all}
assert.Nil(t, parseAvoidCPUs(c, l))
assert.Nil(t, parseCpuAffinity(newConfig([]any{1 << 20}), l, 1))
}
}
@@ -154,3 +125,70 @@ firewall:
require.NoError(t, err)
require.Nil(t, ctrl, "a config test hands back nothing to stop, so it must stop itself")
}
func TestParseStagedConfig(t *testing.T) {
l := test.NewLogger()
staged := func(workers any) stagedConfig {
c := config.NewC(l)
if workers != nil {
c.Settings["tun"] = map[string]any{"staged": map[string]any{"workers": workers}}
}
return parseStagedConfig(c, l)
}
for _, workers := range []any{nil, -1, 0} {
require.Equal(t, stagedConfig{}, staged(workers))
}
if runtime.GOOS != "linux" {
require.Equal(t, stagedConfig{}, staged(2))
return
}
want := stagedConfig{workers: 2, tx: !noiseutil.EncryptLockNeeded, rx: true, inlineBelow: 256, gateHold: stagedGateHold,
txSlots: 8, rxSlots: 6}
require.Equal(t, want, staged(2))
c := config.NewC(l)
c.Settings["listen"] = map[string]any{"batch": 128}
c.Settings["tun"] = map[string]any{"staged": map[string]any{"workers": 2, "tx_slots": 3, "rx_slots": 1}}
got := parseStagedConfig(c, l)
require.Equal(t, []int{3, 2}, []int{got.txSlots, got.rxSlots}, "overrides apply, down to the minimum")
c = config.NewC(l)
c.Settings["tun"] = map[string]any{"staged": map[string]any{"workers": 2, "tx": false, "inline_below": 0}}
got = parseStagedConfig(c, l)
require.False(t, got.tx, "tx: false keeps transmit inline")
require.True(t, got.rx)
require.Zero(t, got.inlineBelow, "inline_below: 0 hands every batch off")
c = config.NewC(l)
c.Settings["tun"] = map[string]any{"staged": map[string]any{"workers": 2, "inline_below": 32}}
require.Equal(t, 32, parseStagedConfig(c, l).inlineBelow)
c.Settings["tun"] = map[string]any{"staged": map[string]any{"workers": 2, "inline_below": -1}}
require.Zero(t, parseStagedConfig(c, l).inlineBelow, "a negative threshold is 0")
for _, tt := range []struct {
hold any
want int
}{{nil, stagedGateHold}, {8, 8}, {0, 1}, {-3, 1}} {
c = config.NewC(l)
settings := map[string]any{"workers": 2}
if tt.hold != nil {
settings["gate_hold"] = tt.hold
}
c.Settings["tun"] = map[string]any{"staged": settings}
require.Equal(t, tt.want, parseStagedConfig(c, l).gateHold, "gate_hold %v", tt.hold)
}
}
func TestStagedSlots(t *testing.T) {
for _, tt := range []struct{ workers, batch, tx, rx int }{
{workers: 2, batch: 64, tx: 8, rx: 6},
{workers: 12, batch: 64, tx: 14, rx: 6},
{workers: 2, batch: 96, tx: 8, rx: 4},
{workers: 2, batch: 512, tx: 8, rx: 4},
{workers: 2, batch: 32, tx: 8, rx: 6},
{workers: 2, batch: 1, tx: 8, rx: 6},
} {
tx, rx := stagedSlots(tt.workers, tt.batch, 0, 0)
require.Equal(t, []int{tt.tx, tt.rx}, []int{tx, rx}, "workers %d batch %d", tt.workers, tt.batch)
}
}
+28 -10
View File
@@ -130,17 +130,10 @@ func (f *Interface) readOutsidePackets(via ViaSender, packet []byte, rxc *rxCont
}
out, err := hostinfo.ConnectionState.Decrypt(f.l, h.MessageCounter, packet, rxc.nb)
if err != nil {
if f.l.Enabled(context.Background(), slog.LevelDebug) {
hostinfo.logger(f.l).Debug("Failed to decrypt packet", "error", err, "from", via, "header", h)
}
if !f.finishOutsideDecrypt(hostinfo, via, h.MessageCounter, err) {
return
}
// Roam before we respond
f.handleHostRoaming(hostinfo, via)
f.connectionManager.In(hostinfo)
switch h.Type {
case header.Message:
switch h.Subtype {
@@ -473,11 +466,36 @@ func parseV4(data []byte, incoming bool, fp *firewall.ParsedPacket) error {
return nil
}
// finishOutsideDecrypt logs a failed decrypt, or roams and records the traffic for an authenticated packet before it
// is handled. It reports whether the packet authenticated.
func (f *Interface) finishOutsideDecrypt(hostinfo *HostInfo, via ViaSender, counter uint64, err error) bool {
if err != nil {
if f.l.Enabled(context.Background(), slog.LevelDebug) {
hostinfo.logger(f.l).Debug("Failed to decrypt packet", "error", err, "from", via, "counter", counter)
}
return false
}
// Roam before we respond
f.handleHostRoaming(hostinfo, via)
f.connectionManager.In(hostinfo)
return true
}
// flushOutside ends a receive batch: it writes out the tun coalescer and drops the batch's hostmap cache.
func (f *Interface) flushOutside(rxc *rxContext) {
if err := f.batchers[rxc.q].Flush(); err != nil {
f.l.Error("Failed to flush tun coalescer", "error", err)
}
clear(rxc.hostmapCache)
}
func (f *Interface) handleOutsideMessagePacket(hostinfo *HostInfo, messageCounter uint64, out []byte, rxc *rxContext) {
err := newPacket(out, true, rxc.fwPacket)
if err != nil {
hostinfo.logger(f.l).Warn("Error while validating inbound packet", "error", err, "packet", out)
return
if f.l.Enabled(context.Background(), slog.LevelDebug) {
hostinfo.logger(f.l).Debug("Error while validating inbound packet", "error", err, "packet", out)
return
}
}
dropReason := f.firewall.Drop(rxc.fwPacket.Packet, true, hostinfo, f.pki.GetCAPool(), rxc.ctCache.Get())
+9 -4
View File
@@ -43,6 +43,14 @@ func (b *SendBatch) Commit(pkt []byte, dst netip.AddrPort) {
b.dsts = append(b.dsts, dst)
}
// Reset drops every queued packet without sending it.
func (b *SendBatch) Reset() {
clear(b.bufs)
b.bufs = b.bufs[:0]
b.dsts = b.dsts[:0]
b.arena.Reset()
}
// Flush writes every queued packet and reports how many actually went out. A short count means some destinations
// were undeliverable; the batch is drained either way.
func (b *SendBatch) Flush() (int, error) {
@@ -51,9 +59,6 @@ func (b *SendBatch) Flush() (int, error) {
if len(b.bufs) > 0 {
written, err = b.out.WriteBatch(b.bufs, b.dsts)
}
clear(b.bufs)
b.bufs = b.bufs[:0]
b.dsts = b.dsts[:0]
b.arena.Reset()
b.Reset()
return written, err
}
+9
View File
@@ -75,6 +75,15 @@ type GSOInfo struct {
// superpacket that needs segmentation before its bytes can be encrypted and sent on the wire.
func (g GSOInfo) IsSuperpacket() bool { return g.Size > 0 }
// SegmentCount reports how many segments SegmentSuperpacket will cut p into, without touching its bytes.
func (p Packet) SegmentCount() int {
if !p.GSO.IsSuperpacket() {
return 1
}
n := (len(p.Bytes) - int(p.GSO.HdrLen) + int(p.GSO.Size) - 1) / int(p.GSO.Size)
return max(n, 1)
}
// Clone returns a Packet whose Bytes is a freshly allocated copy of p.Bytes,
// safe to retain past the next Read or Close on the originating Queue.
// GSO metadata is copied verbatim.
+15
View File
@@ -219,6 +219,21 @@ func (r *Offload) Read() ([]Packet, error) {
return r.pending, nil
}
// SwapRxBuf installs buf as the receive buffer for the following Reads and returns the one backing the packets
// of the most recent Read, so the caller can keep them past the next Read. A nil buf allocates a replacement of
// the required size. Single-reader only, like Read.
func (r *Offload) SwapRxBuf(buf []byte) []byte {
if buf == nil {
buf = make([]byte, tunRxBufCap)
}
if len(buf) < tunRxBufCap {
panic(fmt.Sprintf("tio: SwapRxBuf buffer is %d bytes, need %d", len(buf), tunRxBufCap))
}
old := r.rxBuf
r.rxBuf = buf
return old
}
// logDroppedRead reports a tun packet dropped for a bad/unsupported virtio
// header. Debug-gated so the happy path never pays for attribute assembly.
func (r *Offload) logDroppedRead(err error) {
+19
View File
@@ -911,6 +911,25 @@ func TestOffloadWriteZeroLength(t *testing.T) {
}
}
// TestOffloadSwapRxBuf: SwapRxBuf hands over the buffer the last Read filled and reads into the one it is given.
func TestOffloadSwapRxBuf(t *testing.T) {
o := &Offload{rxBuf: make([]byte, tunRxBufCap)}
read := o.rxBuf
owned := o.SwapRxBuf(nil)
if &owned[0] != &read[0] || len(o.rxBuf) != tunRxBufCap || &o.rxBuf[0] == &read[0] {
t.Fatal("SwapRxBuf(nil) must hand over the last read buffer and allocate a new one")
}
if back := o.SwapRxBuf(owned); &back[0] == &owned[0] || &o.rxBuf[0] != &owned[0] {
t.Fatal("SwapRxBuf must install the buffer it is given")
}
defer func() {
if recover() == nil {
t.Fatal("SwapRxBuf must reject a short buffer")
}
}()
o.SwapRxBuf(make([]byte, 10))
}
// TestWriteGSOSuperpacketGeometry decodes the vnet header the kernel would see for a multi-segment write:
// the GSO type must match the proto and IP version
// gso_size must be the per-segment size (the kernel rejects a superpacket with gso_size == 0),
+7
View File
@@ -41,9 +41,16 @@ func (e *NameError) Error() string {
type DeviceFactory func(c *config.C, l *slog.Logger, vpnNetworks []netip.Prefix, routines int) (Device, error)
func NewDeviceFromConfig(c *config.C, l *slog.Logger, vpnNetworks []netip.Prefix, routines int) (Device, error) {
c.RegisterReloadCallback(func(c *config.C, r *config.Reload) {
r.RestartRequiredIfChanged("tun.disabled")
})
switch {
case c.GetBool("tun.disabled", false):
tun := newDisabledTun(vpnNetworks, c.GetInt("tun.tx_queue", 5000), c.GetBool("stats.message_metrics", false), l)
c.RegisterReloadCallback(func(c *config.C, r *config.Reload) {
r.RestartRequiredIfChanged("tun.tx_queue", "stats.message_metrics")
})
return tun, nil
default:
+5 -4
View File
@@ -38,16 +38,17 @@ func newTunFromFd(c *config.C, l *slog.Logger, deviceFd int, vpnNetworks []netip
l: l,
}
err := t.reload(c, true)
err := t.reload(c, true, nil)
if err != nil {
_ = file.Close()
return nil, err
}
c.RegisterReloadCallback(func(c *config.C) {
err := t.reload(c, false)
c.RegisterReloadCallback(func(c *config.C, r *config.Reload) {
err := t.reload(c, false, r)
if err != nil {
util.LogWithContextIfNeeded("failed to reload tun device", err, t.l)
r.Failed()
}
})
@@ -67,7 +68,7 @@ func (t *tun) Activate() error {
return nil
}
func (t *tun) reload(c *config.C, initial bool) error {
func (t *tun) reload(c *config.C, initial bool, r *config.Reload) error {
change, routes, err := getAllRoutesFromConfig(t.l, c, t.vpnNetworks, initial)
if err != nil {
return err
+45
View File
@@ -0,0 +1,45 @@
//go:build (openbsd || netbsd) && !e2e_testing
package overlay
import (
"errors"
"fmt"
"log/slog"
"os"
"regexp"
"runtime"
"golang.org/x/sys/unix"
)
var deviceNameRE = regexp.MustCompile(`^tun[0-9]+$`)
// tunDevNeedsRestart is true when tun.dev asks for a particular tun that isn't the running one. Anything else takes the
// first free one, and the one we have will do
func tunDevNeedsRestart(name, running string) bool {
return deviceNameRE.MatchString(name) && name != running
}
// openTun opens /dev/name, or the first /dev/tunN nothing else has open when name is empty or not tunN
func openTun(l *slog.Logger, name string) (int, string, error) {
if name != "" && !deviceNameRE.MatchString(name) {
// The name doesn't mean anything here, so like darwin a bad one isn't worth refusing to start over
l.Warn("interface name must be tun[0-9]+ on "+runtime.GOOS+", ignoring", "name", name)
name = ""
}
if name != "" {
fd, err := unix.Open("/dev/"+name, os.O_RDWR, 0)
return fd, name, err
}
for i := 0; ; i++ {
name = fmt.Sprintf("tun%d", i)
fd, err := unix.Open("/dev/"+name, os.O_RDWR, 0)
if err == nil {
return fd, name, nil
}
if !errors.Is(err, unix.EBUSY) {
return -1, "", fmt.Errorf("no free tun device, %s: %w", name, err)
}
}
}
+80
View File
@@ -0,0 +1,80 @@
//go:build (openbsd || netbsd) && !e2e_testing
package overlay
import (
"net/netip"
"testing"
"github.com/slackhq/nebula/config"
"github.com/slackhq/nebula/test"
"github.com/stretchr/testify/assert"
"github.com/stretchr/testify/require"
)
// A tun.dev that isn't tunN is ignored like darwin does, and the first free tun is used. Only naming a different tun
// asks for a restart
func TestTunReloadDevRestart(t *testing.T) {
newWithDev := func(dev string) (*config.C, *tun, error) {
c := config.NewC(test.NewLogger())
require.NoError(t, c.LoadString("tun:\n dev: "+dev+"\n"))
tn, err := newTun(c, test.NewLogger(), []netip.Prefix{netip.MustParsePrefix("10.1.0.2/24")}, false)
if err == nil {
t.Cleanup(func() { _ = tn.Close() })
}
return c, tn, err
}
if _, _, err := newWithDev(""); err != nil {
t.Skipf("can't create a tun device here: %v", err)
}
c, tn, err := newWithDev("nope")
require.NoError(t, err, "a bad name should fall back to a free tun")
require.Regexp(t, `^tun[0-9]+$`, tn.Device)
for _, dev := range []string{"nope", "", tn.Device, "nope"} {
res := c.ReloadConfigString("tun:\n dev: " + dev + "\n")
require.NoError(t, res.Err)
assert.False(t, res.Failed, dev)
assert.False(t, res.RestartRequired, dev)
}
other := "tun0"
if tn.Device == other {
other = "tun1"
}
res := c.ReloadConfigString("tun:\n dev: " + other + "\n")
require.NoError(t, res.Err)
assert.Equal(t, []string{"tun.dev"}, res.RestartKeys)
}
// An empty tun.dev takes the first tun nothing else has open. Reloading it empty, or naming the one we have, needs
// no restart
func TestTunEmptyDevPicksAFreeOne(t *testing.T) {
newEmpty := func() (*config.C, *tun, error) {
c := config.NewC(test.NewLogger())
require.NoError(t, c.LoadString("tun: {}\n"))
tn, err := newTun(c, test.NewLogger(), []netip.Prefix{netip.MustParsePrefix("10.1.0.2/24")}, false)
if err == nil {
t.Cleanup(func() { _ = tn.Close() })
}
return c, tn, err
}
c, first, err := newEmpty()
if err != nil {
t.Skipf("can't create a tun device here: %v", err)
}
_, second, err := newEmpty()
require.NoError(t, err, "the second tun should skip the one the first has open")
assert.NotEqual(t, first.Device, second.Device)
for _, cfg := range []string{
"tun: {}\npunchy:\n punch: true\n",
"tun:\n dev: " + first.Device + "\n",
"tun: {}\n",
} {
res := c.ReloadConfigString(cfg)
require.NoError(t, res.Err)
assert.False(t, res.Failed)
assert.False(t, res.RestartRequired, cfg)
}
}
+3
View File
@@ -10,6 +10,9 @@ import (
"github.com/slackhq/nebula/wfp"
)
// interfaceBypassKeys are only read when the interface bypass is installed
var interfaceBypassKeys = []string{"tun.windows_bypass_wdf"}
// installInterfaceBypass installs a WFP PERMIT filter scoped to the wintun interface LUID so inbound traffic on the
// nebula adapter bypasses Windows Defender Firewall.
func installInterfaceBypass(l *slog.Logger, luid uint64) closer {
+3
View File
@@ -4,6 +4,9 @@ package overlay
import "log/slog"
// interfaceBypassKeys is empty, windows-386 has no bypass
var interfaceBypassKeys []string
// installInterfaceBypass is a no-op on windows-386 because we don't currently build for it.
func installInterfaceBypass(_ *slog.Logger, _ uint64) closer {
return nil
+51 -24
View File
@@ -80,17 +80,31 @@ type ifreqAlias6 struct {
Lifetime addrLifetime
}
// utunIndex is the utun tun.dev asks for, or -1 for whichever is free. ok is false for a name that isn't utunN, which
// also gets whichever is free
func utunIndex(name string) (index int, ok bool) {
if name == "" || name == "utun" {
return -1, true
}
if _, err := fmt.Sscanf(name, "utun%d", &index); err != nil || index < 0 {
return -1, false
}
return index, true
}
// tunDevNeedsRestart is true when tun.dev asks for a particular utun that isn't the running one. Anything else takes
// whichever is free, and the one we have will do
func tunDevNeedsRestart(name, running string) bool {
index, _ := utunIndex(name)
return index >= 0 && fmt.Sprintf("utun%d", index) != running
}
func newTun(c *config.C, l *slog.Logger, vpnNetworks []netip.Prefix, _ bool) (*tun, error) {
name := c.GetString("tun.dev", "")
ifIndex := -1
if name != "" && name != "utun" {
_, err := fmt.Sscanf(name, "utun%d", &ifIndex)
if err != nil || ifIndex < 0 {
// NOTE: we don't make this error so we don't break existing
// configs that set a name before it was used.
l.Warn("interface name must be utun[0-9]+ on Darwin, ignoring")
ifIndex = -1
}
ifIndex, ok := utunIndex(c.GetString("tun.dev", ""))
if !ok {
// NOTE: we don't make this error so we don't break existing
// configs that set a name before it was used.
l.Warn("interface name must be utun[0-9]+ on Darwin, ignoring")
}
fd, err := unix.Socket(unix.AF_SYSTEM, unix.SOCK_DGRAM, unix.AF_SYS_CONTROL)
@@ -114,7 +128,7 @@ func newTun(c *config.C, l *slog.Logger, vpnNetworks []netip.Prefix, _ bool) (*t
return nil, fmt.Errorf("SYS_CONNECT: %v", err)
}
name, err = unix.GetsockoptString(fd, unix.AF_SYS_CONTROL, _UTUN_OPT_IFNAME)
name, err := unix.GetsockoptString(fd, unix.AF_SYS_CONTROL, _UTUN_OPT_IFNAME)
if err != nil {
return nil, fmt.Errorf("failed to retrieve tun name: %w", err)
}
@@ -132,15 +146,20 @@ func newTun(c *config.C, l *slog.Logger, vpnNetworks []netip.Prefix, _ bool) (*t
l: l,
}
err = t.reload(c, true)
err = t.reload(c, true, nil)
if err != nil {
return nil, err
}
c.RegisterReloadCallback(func(c *config.C) {
err := t.reload(c, false)
c.RegisterReloadCallback(func(c *config.C, r *config.Reload) {
r.RestartRequiredIfChanged("tun.mtu")
if tunDevNeedsRestart(c.GetString("tun.dev", ""), t.Device) {
r.RestartRequiredIfChanged("tun.dev")
}
err := t.reload(c, false, r)
if err != nil {
util.LogWithContextIfNeeded("failed to reload tun device", err, t.l)
r.Failed()
}
})
@@ -174,14 +193,15 @@ func newTunFromFd(c *config.C, l *slog.Logger, deviceFd int, vpnNetworks []netip
l: l,
}
if err := t.reload(c, true); err != nil {
if err := t.reload(c, true, nil); err != nil {
_ = file.Close()
return nil, err
}
c.RegisterReloadCallback(func(c *config.C) {
if err := t.reload(c, false); err != nil {
c.RegisterReloadCallback(func(c *config.C, r *config.Reload) {
if err := t.reload(c, false, r); err != nil {
util.LogWithContextIfNeeded("failed to reload tun device", err, t.l)
r.Failed()
}
})
@@ -268,7 +288,7 @@ func (t *tun) Activate() error {
}
// Unsafe path routes
return t.addRoutes(false)
return t.addRoutes(false, nil)
}
// activate4 assigns our vpn address as a /32 and routes the vpn network to the tun explicitly.
@@ -366,7 +386,7 @@ func (t *tun) activate6(network netip.Prefix) error {
return nil
}
func (t *tun) reload(c *config.C, initial bool) error {
func (t *tun) reload(c *config.C, initial bool, r *config.Reload) error {
change, routes, err := getAllRoutesFromConfig(t.l, c, t.vpnNetworks, initial)
if err != nil {
return err
@@ -387,16 +407,18 @@ func (t *tun) reload(c *config.C, initial bool) error {
if !initial {
// Remove first, if the system removes a wanted route hopefully it will be re-added next
err := t.removeRoutes(findRemovedRoutes(routes, *oldRoutes))
err := t.removeRoutes(findRemovedRoutes(routes, *oldRoutes), r)
if err != nil {
util.LogWithContextIfNeeded("Failed to remove routes", err, t.l)
r.Failed()
}
// Ensure any routes we actually want are installed
err = t.addRoutes(true)
err = t.addRoutes(true, r)
if err != nil {
// Catch any stray logs
util.LogWithContextIfNeeded("Failed to add routes", err, t.l)
r.Failed()
}
}
@@ -489,7 +511,7 @@ func getLinkAddr(name string) (*netroute.LinkAddr, error) {
return nil, nil
}
func (t *tun) addRoutes(logErrors bool) error {
func (t *tun) addRoutes(logErrors bool, rl *config.Reload) error {
// The route tree is still ours, the system routing table is not
if t.hostOwned {
return nil
@@ -524,6 +546,7 @@ func (t *tun) addRoutes(logErrors bool) error {
retErr := util.NewContextualError("Failed to add route", map[string]any{"route": r}, err)
if logErrors {
retErr.Log(t.l)
rl.Failed()
} else {
return retErr
}
@@ -538,7 +561,7 @@ func (t *tun) addRoutes(logErrors bool) error {
return nil
}
func (t *tun) removeRoutes(routes []Route) error {
func (t *tun) removeRoutes(routes []Route, rl *config.Reload) error {
linkAddr := t.linkAddr.Load()
if t.hostOwned || linkAddr == nil {
return nil
@@ -551,8 +574,12 @@ func (t *tun) removeRoutes(routes []Route) error {
}
err := delRoute(r.Cidr, linkAddr)
if err != nil {
if errors.Is(err, unix.ESRCH) {
// Already gone, which is what we wanted
t.l.Info("Route was already removed", "route", r)
} else if err != nil {
t.l.Error("Failed to remove route", "error", err, "route", r)
rl.Failed()
} else {
t.l.Info("Removed route", "route", r)
}
+18 -3
View File
@@ -72,8 +72,8 @@ func TestTunRoutesBeforeActivate(t *testing.T) {
}}
tn.Routes.Store(&routes)
assert.NoError(t, tn.addRoutes(true))
assert.NoError(t, tn.removeRoutes(routes))
assert.NoError(t, tn.addRoutes(true, nil))
assert.NoError(t, tn.removeRoutes(routes, nil))
}
// A tun.routes entry with no via is never installed, so removing it must not delete a route for the same cidr that
@@ -96,8 +96,23 @@ func TestTunReloadLeavesRoutesItNeverInstalled(t *testing.T) {
t.Cleanup(func() { _ = tn.Close() })
require.NoError(t, tn.Activate())
require.NoError(t, c.ReloadConfigString("tun: {}\n"))
res := c.ReloadConfigString("tun: {}\n")
require.NoError(t, res.Err)
assert.False(t, res.Failed, "removing a route we never installed failed the reload")
msgs, err := fetchRoutes()
require.NoError(t, err)
assert.Equal(t, lo0.Index, routeInterfaceIn(msgs, netip.MustParsePrefix(cidr)))
}
// Only naming a different utun asks for a restart. Empty, plain utun and names that aren't utunN take whichever is free
func TestTunDevNeedsRestart(t *testing.T) {
for name, want := range map[string]bool{
"": false,
"utun": false,
"nope": false,
"utun7": false,
"utun3": true,
} {
assert.Equal(t, want, tunDevNeedsRestart(name, "utun7"), name)
}
}
+19 -10
View File
@@ -385,16 +385,18 @@ func newTun(c *config.C, l *slog.Logger, vpnNetworks []netip.Prefix, _ bool) (*t
},
}
err = t.reload(c, true)
err = t.reload(c, true, nil)
if err != nil {
return nil, err
}
closeOnErr = false
c.RegisterReloadCallback(func(c *config.C) {
err := t.reload(c, false)
c.RegisterReloadCallback(func(c *config.C, r *config.Reload) {
r.RestartRequiredIfChanged("tun.dev", "tun.mtu")
err := t.reload(c, false, r)
if err != nil {
util.LogWithContextIfNeeded("failed to reload tun device", err, t.l)
r.Failed()
}
})
@@ -493,7 +495,7 @@ func (t *tun) Activate() error {
}
}
return t.addRoutes(false)
return t.addRoutes(false, nil)
}
func (t *tun) setMTU() error {
@@ -509,7 +511,7 @@ func (t *tun) setMTU() error {
return err
}
func (t *tun) reload(c *config.C, initial bool) error {
func (t *tun) reload(c *config.C, initial bool, r *config.Reload) error {
change, routes, err := getAllRoutesFromConfig(t.l, c, t.vpnNetworks, initial)
if err != nil {
return err
@@ -530,16 +532,18 @@ func (t *tun) reload(c *config.C, initial bool) error {
if !initial {
// Remove first, if the system removes a wanted route hopefully it will be re-added next
err := t.removeRoutes(findRemovedRoutes(routes, *oldRoutes))
err := t.removeRoutes(findRemovedRoutes(routes, *oldRoutes), r)
if err != nil {
util.LogWithContextIfNeeded("Failed to remove routes", err, t.l)
r.Failed()
}
// Ensure any routes we actually want are installed
err = t.addRoutes(true)
err = t.addRoutes(true, r)
if err != nil {
// Catch any stray logs
util.LogWithContextIfNeeded("Failed to add routes", err, t.l)
r.Failed()
}
}
@@ -563,7 +567,7 @@ func (t *tun) Queues(int) ([]tio.Queue, error) {
return []tio.Queue{tio.NewSingleQueue(t, defaultBatchBufSize)}, nil
}
func (t *tun) addRoutes(logErrors bool) error {
func (t *tun) addRoutes(logErrors bool, rl *config.Reload) error {
routes := *t.Routes.Load()
for _, r := range routes {
if len(r.Via) == 0 || !r.Install {
@@ -576,6 +580,7 @@ func (t *tun) addRoutes(logErrors bool) error {
retErr := util.NewContextualError("Failed to add route", map[string]any{"route": r}, err)
if logErrors {
retErr.Log(t.l)
rl.Failed()
} else {
return retErr
}
@@ -587,7 +592,7 @@ func (t *tun) addRoutes(logErrors bool) error {
return nil
}
func (t *tun) removeRoutes(routes []Route) error {
func (t *tun) removeRoutes(routes []Route, rl *config.Reload) error {
for _, r := range routes {
if len(r.Via) == 0 || !r.Install {
// addRoutes never installs these
@@ -595,8 +600,12 @@ func (t *tun) removeRoutes(routes []Route) error {
}
err := delRoute(r.Cidr, t.linkAddr)
if err != nil {
if errors.Is(err, unix.ESRCH) {
// Already gone, which is what we wanted
t.l.Info("Route was already removed", "route", r)
} else if err != nil {
t.l.Error("Failed to remove route", "error", err, "route", r)
rl.Failed()
} else {
t.l.Info("Removed route", "route", r)
}
+5 -4
View File
@@ -47,16 +47,17 @@ func newTunFromFd(c *config.C, l *slog.Logger, deviceFd int, vpnNetworks []netip
l: l,
}
err := t.reload(c, true)
err := t.reload(c, true, nil)
if err != nil {
_ = file.Close()
return nil, err
}
c.RegisterReloadCallback(func(c *config.C) {
err := t.reload(c, false)
c.RegisterReloadCallback(func(c *config.C, r *config.Reload) {
err := t.reload(c, false, r)
if err != nil {
util.LogWithContextIfNeeded("failed to reload tun device", err, t.l)
r.Failed()
}
})
@@ -67,7 +68,7 @@ func (t *tun) Activate() error {
return nil
}
func (t *tun) reload(c *config.C, initial bool) error {
func (t *tun) reload(c *config.C, initial bool, r *config.Reload) error {
change, routes, err := getAllRoutesFromConfig(t.l, c, t.vpnNetworks, initial)
if err != nil {
return err
+28 -14
View File
@@ -185,6 +185,10 @@ func newTun(c *config.C, l *slog.Logger, vpnNetworks []netip.Prefix, multiqueue
}
t.Device = name
// Only read when we create the device, an fd handed to us already has its name and offloads
c.RegisterReloadCallback(func(c *config.C, r *config.Reload) {
r.RestartRequiredIfChanged("tun.dev", "tun.use_offloads")
})
return t, nil
}
@@ -228,22 +232,24 @@ func newTunGeneric(c *config.C, l *slog.Logger, fd int, vnetHdr bool, offloadFla
l: l,
}
if err = t.reload(c, true); err != nil {
if err = t.reload(c, true, nil); err != nil {
_ = t.Close()
return nil, err
}
c.RegisterReloadCallback(func(c *config.C) {
err := t.reload(c, false)
c.RegisterReloadCallback(func(c *config.C, r *config.Reload) {
r.RestartRequiredIfChanged("tun.tx_queue", "tun.use_system_route_table", "tun.use_system_route_table_buffer_size")
err := t.reload(c, false, r)
if err != nil {
util.LogWithContextIfNeeded("failed to reload tun device", err, t.l)
r.Failed()
}
})
return t, nil
}
func (t *tun) reload(c *config.C, initial bool) error {
func (t *tun) reload(c *config.C, initial bool, r *config.Reload) error {
routeChange, routes, err := getAllRoutesFromConfig(t.l, c, t.vpnNetworks, initial)
if err != nil {
return err
@@ -297,7 +303,7 @@ func (t *tun) reload(c *config.C, initial bool) error {
if !initial {
if oldMaxMTU != newMaxMTU {
t.setMTU()
t.setMTU(r)
t.l.Info("Set max MTU", "mtu", t.MaxMTU, "oldMTU", oldMaxMTU)
}
@@ -305,7 +311,8 @@ func (t *tun) reload(c *config.C, initial bool) error {
for i := range t.vpnNetworks {
err := t.setDefaultRoute(t.vpnNetworks[i])
if err != nil {
t.l.Warn(err.Error())
t.l.Error(err.Error())
r.Failed()
} else {
t.l.Info("Set default MTU", "mtu", t.DefaultMTU, "oldMTU", oldDefaultMTU)
}
@@ -313,13 +320,14 @@ func (t *tun) reload(c *config.C, initial bool) error {
}
// Remove first, if the system removes a wanted route hopefully it will be re-added next
t.removeRoutes(findRemovedRoutes(routes, *oldRoutes))
t.removeRoutes(findRemovedRoutes(routes, *oldRoutes), r)
// Ensure any routes we actually want are installed
err = t.addRoutes(true)
err = t.addRoutes(true, r)
if err != nil {
// This should never be called since addRoutes should log its own errors in a reload condition
util.LogWithContextIfNeeded("Failed to refresh routes", err, t.l)
r.Failed()
}
}
@@ -474,7 +482,7 @@ func (t *tun) Activate() error {
t.deviceIndex = link.Attrs().Index
// Setup our default MTU
t.setMTU()
t.setMTU(nil)
// Set the transmit queue length
ifrq := ifreqQLEN{Name: devName, Value: int32(t.TXQueueLen)}
@@ -506,7 +514,7 @@ func (t *tun) Activate() error {
}
// Set the routes
if err = t.addRoutes(false); err != nil {
if err = t.addRoutes(false, nil); err != nil {
return err
}
@@ -519,12 +527,13 @@ func (t *tun) Activate() error {
return nil
}
func (t *tun) setMTU() {
func (t *tun) setMTU(r *config.Reload) {
// Set the MTU on the device
ifm := ifreqMTU{Name: t.deviceBytes(), MTU: int32(t.MaxMTU)}
if err := ioctl(t.ioctlFd, unix.SIOCSIFMTU, uintptr(unsafe.Pointer(&ifm))); err != nil {
// This is currently a non fatal condition because the route table must have the MTU set appropriately as well
t.l.Error("Failed to set tun mtu", "error", err)
r.Failed()
}
}
@@ -577,7 +586,7 @@ func (t *tun) setDefaultRoute(cidr netip.Prefix) error {
return nil
}
func (t *tun) addRoutes(logErrors bool) error {
func (t *tun) addRoutes(logErrors bool, rl *config.Reload) error {
// Path routes
routes := *t.Routes.Load()
for _, r := range routes {
@@ -607,6 +616,7 @@ func (t *tun) addRoutes(logErrors bool) error {
retErr := util.NewContextualError("Failed to add route", map[string]any{"route": r}, err)
if logErrors {
retErr.Log(t.l)
rl.Failed()
} else {
return retErr
}
@@ -618,7 +628,7 @@ func (t *tun) addRoutes(logErrors bool) error {
return nil
}
func (t *tun) removeRoutes(routes []Route) {
func (t *tun) removeRoutes(routes []Route, rl *config.Reload) {
for _, r := range routes {
if !r.Install {
continue
@@ -642,8 +652,12 @@ func (t *tun) removeRoutes(routes []Route) {
}
err := netlink.RouteDel(&nr)
if err != nil {
if errors.Is(err, unix.ESRCH) {
// Already gone, which is what we wanted
t.l.Info("Route was already removed", "route", r)
} else if err != nil {
t.l.Error("Failed to remove route", "error", err, "route", r)
rl.Failed()
} else {
t.l.Info("Removed route", "route", r)
}
+23 -24
View File
@@ -8,7 +8,6 @@ import (
"log/slog"
"net/netip"
"os"
"regexp"
"sync/atomic"
"syscall"
"unsafe"
@@ -67,24 +66,12 @@ type tun struct {
fd int
}
var deviceNameRE = regexp.MustCompile(`^tun[0-9]+$`)
func newTunFromFd(_ *config.C, _ *slog.Logger, _ int, _ []netip.Prefix) (*tun, error) {
return nil, fmt.Errorf("newTunFromFd not supported in NetBSD")
}
func newTun(c *config.C, l *slog.Logger, vpnNetworks []netip.Prefix, _ bool) (*tun, error) {
// Try to open tun device
var err error
deviceName := c.GetString("tun.dev", "")
if deviceName == "" {
return nil, fmt.Errorf("a device name in the format of /dev/tunN must be specified")
}
if !deviceNameRE.MatchString(deviceName) {
return nil, fmt.Errorf("a device name in the format of /dev/tunN must be specified")
}
fd, err := unix.Open("/dev/"+deviceName, os.O_RDWR, 0)
fd, deviceName, err := openTun(l, c.GetString("tun.dev", ""))
if err != nil {
return nil, err
}
@@ -103,15 +90,20 @@ func newTun(c *config.C, l *slog.Logger, vpnNetworks []netip.Prefix, _ bool) (*t
l: l,
}
err = t.reload(c, true)
err = t.reload(c, true, nil)
if err != nil {
return nil, err
}
c.RegisterReloadCallback(func(c *config.C) {
err := t.reload(c, false)
c.RegisterReloadCallback(func(c *config.C, r *config.Reload) {
r.RestartRequiredIfChanged("tun.mtu")
if tunDevNeedsRestart(c.GetString("tun.dev", ""), t.Device) {
r.RestartRequiredIfChanged("tun.dev")
}
err := t.reload(c, false, r)
if err != nil {
util.LogWithContextIfNeeded("failed to reload tun device", err, t.l)
r.Failed()
}
})
@@ -324,7 +316,7 @@ func (t *tun) Activate() error {
}
}
return t.addRoutes(false)
return t.addRoutes(false, nil)
}
func (t *tun) doIoctlByName(ctl uintptr, value uint32) error {
@@ -339,7 +331,7 @@ func (t *tun) doIoctlByName(ctl uintptr, value uint32) error {
return err
}
func (t *tun) reload(c *config.C, initial bool) error {
func (t *tun) reload(c *config.C, initial bool, r *config.Reload) error {
change, routes, err := getAllRoutesFromConfig(t.l, c, t.vpnNetworks, initial)
if err != nil {
return err
@@ -360,16 +352,18 @@ func (t *tun) reload(c *config.C, initial bool) error {
if !initial {
// Remove first, if the system removes a wanted route hopefully it will be re-added next
err := t.removeRoutes(findRemovedRoutes(routes, *oldRoutes))
err := t.removeRoutes(findRemovedRoutes(routes, *oldRoutes), r)
if err != nil {
util.LogWithContextIfNeeded("Failed to remove routes", err, t.l)
r.Failed()
}
// Ensure any routes we actually want are installed
err = t.addRoutes(true)
err = t.addRoutes(true, r)
if err != nil {
// Catch any stray logs
util.LogWithContextIfNeeded("Failed to add routes", err, t.l)
r.Failed()
}
}
@@ -393,7 +387,7 @@ func (t *tun) Queues(int) ([]tio.Queue, error) {
return []tio.Queue{tio.NewSingleQueue(t, defaultBatchBufSize)}, nil
}
func (t *tun) addRoutes(logErrors bool) error {
func (t *tun) addRoutes(logErrors bool, rl *config.Reload) error {
routes := *t.Routes.Load()
for _, r := range routes {
@@ -407,6 +401,7 @@ func (t *tun) addRoutes(logErrors bool) error {
retErr := util.NewContextualError("Failed to add route", map[string]any{"route": r}, err)
if logErrors {
retErr.Log(t.l)
rl.Failed()
} else {
return retErr
}
@@ -418,7 +413,7 @@ func (t *tun) addRoutes(logErrors bool) error {
return nil
}
func (t *tun) removeRoutes(routes []Route) error {
func (t *tun) removeRoutes(routes []Route, rl *config.Reload) error {
for _, r := range routes {
if len(r.Via) == 0 || !r.Install {
// addRoutes never installs these
@@ -426,8 +421,12 @@ func (t *tun) removeRoutes(routes []Route) error {
}
err := delRoute(r.Cidr, t.vpnNetworks)
if err != nil {
if errors.Is(err, unix.ESRCH) {
// Already gone, which is what we wanted
t.l.Info("Route was already removed", "route", r)
} else if err != nil {
t.l.Error("Failed to remove route", "error", err, "route", r)
rl.Failed()
} else {
t.l.Info("Removed route", "route", r)
}
+23 -24
View File
@@ -8,7 +8,6 @@ import (
"log/slog"
"net/netip"
"os"
"regexp"
"sync/atomic"
"syscall"
"unsafe"
@@ -58,24 +57,12 @@ type tun struct {
fd int
}
var deviceNameRE = regexp.MustCompile(`^tun[0-9]+$`)
func newTunFromFd(_ *config.C, _ *slog.Logger, _ int, _ []netip.Prefix) (*tun, error) {
return nil, fmt.Errorf("newTunFromFd not supported in openbsd")
}
func newTun(c *config.C, l *slog.Logger, vpnNetworks []netip.Prefix, _ bool) (*tun, error) {
// Try to open tun device
var err error
deviceName := c.GetString("tun.dev", "")
if deviceName == "" {
return nil, fmt.Errorf("a device name in the format of /dev/tunN must be specified")
}
if !deviceNameRE.MatchString(deviceName) {
return nil, fmt.Errorf("a device name in the format of /dev/tunN must be specified")
}
fd, err := unix.Open("/dev/"+deviceName, os.O_RDWR, 0)
fd, deviceName, err := openTun(l, c.GetString("tun.dev", ""))
if err != nil {
return nil, err
}
@@ -94,15 +81,20 @@ func newTun(c *config.C, l *slog.Logger, vpnNetworks []netip.Prefix, _ bool) (*t
l: l,
}
err = t.reload(c, true)
err = t.reload(c, true, nil)
if err != nil {
return nil, err
}
c.RegisterReloadCallback(func(c *config.C) {
err := t.reload(c, false)
c.RegisterReloadCallback(func(c *config.C, r *config.Reload) {
r.RestartRequiredIfChanged("tun.mtu")
if tunDevNeedsRestart(c.GetString("tun.dev", ""), t.Device) {
r.RestartRequiredIfChanged("tun.dev")
}
err := t.reload(c, false, r)
if err != nil {
util.LogWithContextIfNeeded("failed to reload tun device", err, t.l)
r.Failed()
}
})
@@ -303,7 +295,7 @@ func (t *tun) Activate() error {
}
}
return t.addRoutes(false)
return t.addRoutes(false, nil)
}
func (t *tun) doIoctlByName(ctl uintptr, value uint32) error {
@@ -318,7 +310,7 @@ func (t *tun) doIoctlByName(ctl uintptr, value uint32) error {
return err
}
func (t *tun) reload(c *config.C, initial bool) error {
func (t *tun) reload(c *config.C, initial bool, r *config.Reload) error {
change, routes, err := getAllRoutesFromConfig(t.l, c, t.vpnNetworks, initial)
if err != nil {
return err
@@ -339,16 +331,18 @@ func (t *tun) reload(c *config.C, initial bool) error {
if !initial {
// Remove first, if the system removes a wanted route hopefully it will be re-added next
err := t.removeRoutes(findRemovedRoutes(routes, *oldRoutes))
err := t.removeRoutes(findRemovedRoutes(routes, *oldRoutes), r)
if err != nil {
util.LogWithContextIfNeeded("Failed to remove routes", err, t.l)
r.Failed()
}
// Ensure any routes we actually want are installed
err = t.addRoutes(true)
err = t.addRoutes(true, r)
if err != nil {
// Catch any stray logs
util.LogWithContextIfNeeded("Failed to add routes", err, t.l)
r.Failed()
}
}
@@ -372,7 +366,7 @@ func (t *tun) Queues(int) ([]tio.Queue, error) {
return []tio.Queue{tio.NewSingleQueue(t, defaultBatchBufSize)}, nil
}
func (t *tun) addRoutes(logErrors bool) error {
func (t *tun) addRoutes(logErrors bool, rl *config.Reload) error {
routes := *t.Routes.Load()
for _, r := range routes {
@@ -386,6 +380,7 @@ func (t *tun) addRoutes(logErrors bool) error {
retErr := util.NewContextualError("Failed to add route", map[string]any{"route": r}, err)
if logErrors {
retErr.Log(t.l)
rl.Failed()
} else {
return retErr
}
@@ -397,7 +392,7 @@ func (t *tun) addRoutes(logErrors bool) error {
return nil
}
func (t *tun) removeRoutes(routes []Route) error {
func (t *tun) removeRoutes(routes []Route, rl *config.Reload) error {
for _, r := range routes {
if len(r.Via) == 0 || !r.Install {
// addRoutes never installs these
@@ -405,8 +400,12 @@ func (t *tun) removeRoutes(routes []Route) error {
}
err := delRoute(r.Cidr, t.vpnNetworks)
if err != nil {
if errors.Is(err, unix.ESRCH) {
// Already gone, which is what we wanted
t.l.Info("Route was already removed", "route", r)
} else if err != nil {
t.l.Error("Failed to remove route", "error", err, "route", r)
rl.Failed()
} else {
t.l.Info("Removed route", "route", r)
}
+55 -4
View File
@@ -4,6 +4,7 @@ package overlay
import (
"net/netip"
"os"
"testing"
"github.com/slackhq/nebula/config"
@@ -25,10 +26,10 @@ func TestReloadMTUOnlyKeepsRoutes(t *testing.T) {
ioctlFd: ^uintptr(0),
routesFromSystem: map[netip.Prefix]routing.Gateways{},
}
require.NoError(t, tn.reload(c, true))
require.NoError(t, tn.reload(c, true, nil))
require.NoError(t, c.ReloadConfigString("tun:\n mtu: 1400\n"+routes))
_ = tn.reload(c, false)
require.NoError(t, c.ReloadConfigString("tun:\n mtu: 1400\n"+routes).Err)
_ = tn.reload(c, false, nil)
got := *tn.Routes.Load()
require.Len(t, got, 1)
@@ -50,7 +51,57 @@ func TestReloadMaxMTUIsTheLargestRoute(t *testing.T) {
ioctlFd: ^uintptr(0),
routesFromSystem: map[netip.Prefix]routing.Gateways{},
}
require.NoError(t, tn.reload(c, true))
require.NoError(t, tn.reload(c, true, nil))
assert.Equal(t, 1500, tn.MaxMTU)
assert.Equal(t, 1300, tn.DefaultMTU)
}
// There is no device behind this tun, so adding a route always fails. Removing one is refused without root, as root the
// kernel answers that the route isn't there, which is what we wanted
func TestReloadRouteFailures(t *testing.T) {
route := "tun:\n mtu: 1300\n unsafe_routes:\n - route: 192.168.100.0/24\n via: 10.1.0.1\n"
cases := []struct {
name string
from, to string
wantFails bool
}{
{"added", "tun:\n mtu: 1300\n", route, true},
{"removed", route, "tun:\n mtu: 1300\n", os.Geteuid() != 0},
{"unchanged", route, route + "punchy:\n punch: true\n", false},
}
for _, tc := range cases {
t.Run(tc.name, func(t *testing.T) {
c := config.NewC(test.NewLogger())
require.NoError(t, c.LoadString(tc.from))
tn := &tun{
l: test.NewLogger(),
vpnNetworks: []netip.Prefix{netip.MustParsePrefix("10.1.0.2/24")},
ioctlFd: ^uintptr(0),
routesFromSystem: map[netip.Prefix]routing.Gateways{},
}
require.NoError(t, tn.reload(c, true, nil))
c.RegisterReloadCallback(func(c *config.C, r *config.Reload) {
require.NoError(t, tn.reload(c, false, r))
})
res := c.ReloadConfigString(tc.to)
require.NoError(t, res.Err)
assert.Equal(t, tc.wantFails, res.Failed)
})
}
}
// Keys only read when the device is created need a restart to apply
func TestTunReloadRestartKeys(t *testing.T) {
c := config.NewC(test.NewLogger())
require.NoError(t, c.LoadString("tun:\n dev: nebrk0\n"))
tn, err := NewDeviceFromConfig(c, test.NewLogger(), []netip.Prefix{netip.MustParsePrefix("10.1.0.2/24")}, 1)
if err != nil {
t.Skipf("can't create a tun device here: %v", err)
}
t.Cleanup(func() { _ = tn.Close() })
res := c.ReloadConfigString("tun:\n disabled: true\n dev: nebrk1\n tx_queue: 100\n")
require.NoError(t, res.Err)
assert.ElementsMatch(t, []string{"tun.disabled", "tun.dev", "tun.tx_queue"}, res.RestartKeys)
}
+24
View File
@@ -0,0 +1,24 @@
package overlay
import (
"net/netip"
"testing"
"github.com/slackhq/nebula/config"
"github.com/slackhq/nebula/test"
"github.com/stretchr/testify/assert"
"github.com/stretchr/testify/require"
)
// tun.disabled and the disabled tun's settings are only read when the device is made
func TestDisabledTunRestartKeys(t *testing.T) {
c := config.NewC(test.NewLogger())
require.NoError(t, c.LoadString("tun:\n disabled: true\n"))
d, err := NewDeviceFromConfig(c, test.NewLogger(), []netip.Prefix{netip.MustParsePrefix("10.1.0.2/24")}, 1)
require.NoError(t, err)
t.Cleanup(func() { _ = d.Close() })
res := c.ReloadConfigString("tun:\n disabled: false\n tx_queue: 100\n")
require.NoError(t, res.Err)
assert.ElementsMatch(t, []string{"tun.disabled", "tun.tx_queue"}, res.RestartKeys)
}
+28 -10
View File
@@ -84,7 +84,7 @@ func newTun(c *config.C, l *slog.Logger, vpnNetworks []netip.Prefix, _ bool) (*w
l: l,
}
err = t.reload(c, true)
err = t.reload(c, true, nil)
if err != nil {
return nil, err
}
@@ -108,17 +108,28 @@ func newTun(c *config.C, l *slog.Logger, vpnNetworks []netip.Prefix, _ bool) (*w
// Disable registration before Activate assigns addresses and triggers it.
disableDNSRegistration(l, *guid)
c.RegisterReloadCallback(func(c *config.C) {
err := t.reload(c, false)
c.RegisterReloadCallback(func(c *config.C, r *config.Reload) {
r.RestartRequiredIfChanged("tun.dev", "tun.mtu")
// Compare with the running category, not the last config. A restart with one we can't parse would fail, so say
// that now rather than ask for one, and going back to the running one after a bad reload needs no restart
if cat, setCat, err := parseNetworkCategory(c.GetString("tun.network_category", "private")); err != nil {
t.l.Error("Invalid tun.network_category, a restart with it would fail", "error", err)
r.Failed()
} else if cat != t.networkCategory || setCat != t.setCategory {
r.RestartRequiredIfChanged("tun.network_category")
}
r.RestartRequiredIfChanged(interfaceBypassKeys...)
err := t.reload(c, false, r)
if err != nil {
util.LogWithContextIfNeeded("failed to reload tun device", err, t.l)
r.Failed()
}
})
return t, nil
}
func (t *winTun) reload(c *config.C, initial bool) error {
func (t *winTun) reload(c *config.C, initial bool, r *config.Reload) error {
change, routes, err := getAllRoutesFromConfig(t.l, c, t.vpnNetworks, initial)
if err != nil {
return err
@@ -139,16 +150,18 @@ func (t *winTun) reload(c *config.C, initial bool) error {
if !initial {
// Remove first, if the system removes a wanted route hopefully it will be re-added next
err := t.removeRoutes(findRemovedSystemRoutes(routes, *oldRoutes))
err := t.removeRoutes(findRemovedSystemRoutes(routes, *oldRoutes), r)
if err != nil {
util.LogWithContextIfNeeded("Failed to remove routes", err, t.l)
r.Failed()
}
// Ensure any routes we actually want are installed
err = t.addRoutes(true)
err = t.addRoutes(true, r)
if err != nil {
// Catch any stray logs
util.LogWithContextIfNeeded("Failed to add routes", err, t.l)
r.Failed()
}
}
@@ -163,7 +176,7 @@ func (t *winTun) Activate() error {
return fmt.Errorf("failed to set address: %w", err)
}
err = t.addRoutes(false)
err = t.addRoutes(false, nil)
if err != nil {
return err
}
@@ -182,7 +195,7 @@ func (t *winTun) Activate() error {
return nil
}
func (t *winTun) addRoutes(logErrors bool) error {
func (t *winTun) addRoutes(logErrors bool, rl *config.Reload) error {
luid := winipcfg.LUID(t.tun.LUID())
routes := *t.Routes.Load()
foundDefault4 := false
@@ -213,6 +226,7 @@ func (t *winTun) addRoutes(logErrors bool) error {
retErr := util.NewContextualError("Failed to add route", map[string]any{"route": r}, err)
if logErrors {
retErr.Log(t.l)
rl.Failed()
continue
} else {
return retErr
@@ -274,7 +288,7 @@ func (t *winTun) setMTU(luid winipcfg.LUID, foundDefault4, carriesV6 bool) error
return nil
}
func (t *winTun) removeRoutes(routes []Route) error {
func (t *winTun) removeRoutes(routes []Route, rl *config.Reload) error {
luid := winipcfg.LUID(t.tun.LUID())
for _, r := range routes {
@@ -284,8 +298,12 @@ func (t *winTun) removeRoutes(routes []Route) error {
// See comment on luid.AddRoute
err := luid.DeleteRoute(r.Cidr, unspecifiedNextHop(r.Cidr))
if err != nil {
if errors.Is(err, windows.ERROR_NOT_FOUND) {
// Already gone, which is what we wanted
t.l.Info("Route was already removed", "route", r)
} else if err != nil {
t.l.Error("Failed to remove route", "error", err, "route", r)
rl.Failed()
} else {
t.l.Info("Removed route", "route", r)
}
+46 -5
View File
@@ -53,6 +53,14 @@ func (rt *routeTest) metric(t *testing.T, cidr string) uint32 {
return row.Metric
}
// reload applies cfg and expects nothing in it to fail
func (rt *routeTest) reload(t *testing.T, cfg string) {
t.Helper()
res := rt.c.ReloadConfigString(cfg)
require.NoError(t, res.Err)
assert.False(t, res.Failed, "the reload reported a failure")
}
func unsafeRoutes(routes ...string) string {
var b strings.Builder
b.WriteString("tun:\n dev: nebroutetest\n unsafe_routes:\n")
@@ -77,7 +85,7 @@ func TestWinTun_ReloadKeepsInstalledRoutes(t *testing.T) {
rt := newRouteTest(t, unsafeRoutes(a))
require.NoError(t, rt.tun.Activate())
require.NoError(t, rt.c.ReloadConfigString(unsafeRoutes(a, b)))
rt.reload(t, unsafeRoutes(a, b))
assert.NotContains(t, rt.log.String(), "Failed to add route")
rt.metric(t, a)
rt.metric(t, b)
@@ -92,7 +100,7 @@ func TestWinTun_ReloadMetricChangeApplies(t *testing.T) {
require.NoError(t, rt.tun.Activate())
require.Equal(t, uint32(100), rt.metric(t, a))
require.NoError(t, rt.c.ReloadConfigString(unsafeRoutes(a+"@200")))
rt.reload(t, unsafeRoutes(a+"@200"))
assert.NotContains(t, rt.log.String(), "Failed to add route")
assert.NotContains(t, rt.log.String(), "Removed route")
assert.Equal(t, uint32(200), rt.metric(t, a))
@@ -120,7 +128,7 @@ func TestWinTun_DuplicateCidrInstallsTheLastEntry(t *testing.T) {
require.NoError(t, rt.tun.Activate())
assert.Equal(t, uint32(200), rt.metric(t, a))
require.NoError(t, rt.c.ReloadConfigString(unsafeRoutes(a+"@100", a+"@200", b)))
rt.reload(t, unsafeRoutes(a+"@100", a+"@200", b))
assert.Equal(t, uint32(200), rt.metric(t, a))
assert.NotContains(t, rt.log.String(), "Updated route metric")
assert.NotContains(t, rt.log.String(), "Failed to add route")
@@ -134,7 +142,7 @@ func TestWinTun_DroppingAnUninstalledDuplicateKeepsTheRoute(t *testing.T) {
rt := newRouteTest(t, unsafeRoutes(a+"@100", a+"@200"))
require.NoError(t, rt.tun.Activate())
require.NoError(t, rt.c.ReloadConfigString(unsafeRoutes(a+"@200")))
rt.reload(t, unsafeRoutes(a+"@200"))
assert.NotContains(t, rt.log.String(), "Removed route")
assert.Equal(t, uint32(200), rt.metric(t, a))
})
@@ -155,12 +163,45 @@ func TestWinTun_ReloadMatchesAFreshStart(t *testing.T) {
rt := newRouteTest(t, unsafeRoutes(a+"@100"))
require.NoError(t, rt.tun.Activate())
require.NoError(t, rt.c.ReloadConfigString(routes))
rt.reload(t, routes)
_, err = rt.luid.Route(cidr, unspecifiedNextHop(cidr))
assert.Error(t, err, "the reload left it installed")
})
}
// Removing a route that is already gone is what we wanted, not a failure
func TestWinTun_ReloadRouteAlreadyGone(t *testing.T) {
forFamilies(t, func(t *testing.T, a, b string) {
rt := newRouteTest(t, unsafeRoutes(a, b))
require.NoError(t, rt.tun.Activate())
p := netip.MustParsePrefix(b)
require.NoError(t, rt.luid.DeleteRoute(p, unspecifiedNextHop(p)))
rt.reload(t, unsafeRoutes(a))
})
}
// A network category we can't parse would fail the restart, so it fails the reload instead of asking for one
func TestWinTun_ReloadInvalidNetworkCategoryFails(t *testing.T) {
rt := newRouteTest(t, unsafeRoutes())
for range 2 {
res := rt.c.ReloadConfigString(unsafeRoutes() + " network_category: nope\n")
require.NoError(t, res.Err)
assert.True(t, res.Failed, "a bad category that didn't change since the last reload is still bad")
assert.False(t, res.RestartRequired)
}
// Fixing it back to the running category needs nothing
res := rt.c.ReloadConfigString(unsafeRoutes() + " network_category: private\n")
require.NoError(t, res.Err)
assert.False(t, res.Failed)
assert.False(t, res.RestartRequired)
res = rt.c.ReloadConfigString(unsafeRoutes() + " network_category: public\n")
require.NoError(t, res.Err)
assert.Equal(t, []string{"tun.network_category"}, res.RestartKeys)
}
// forFamilies runs f with two unsafe_routes CIDRs of each address family, the tun's own network stays IPv4
func forFamilies(t *testing.T, f func(t *testing.T, a, b string)) {
t.Run("ipv4", func(t *testing.T) { f(t, "10.251.1.0/24", "10.251.2.0/24") })
+70 -18
View File
@@ -2,7 +2,9 @@ package nebula
import (
"crypto/fips140"
"crypto/sha256"
"encoding/binary"
"encoding/hex"
"encoding/json"
"errors"
"fmt"
@@ -50,15 +52,30 @@ type CertState struct {
myVpnBroadcastAddrsTable *bart.Lite
}
// errCertNeedsRestart marks a new cert that is refused on reload because only a restart can apply it
var errCertNeedsRestart = errors.New("a restart is required to use the new cert")
func NewPKIFromConfig(l *slog.Logger, c *config.C) (*PKI, error) {
pki := &PKI{l: l}
err := pki.reload(c, true)
err := pki.reload(c, true, nil)
if err != nil {
return nil, err
}
c.RegisterReloadCallback(func(c *config.C) {
rErr := pki.reload(c, false)
c.RegisterReloadCallback(func(c *config.C, r *config.Reload) {
// Compare with the running cipher, not the last config. A restart with one we can't run would fail, so say that
// now rather than ask for one, and going back to the running one after a bad reload needs no restart
if cipher := c.GetString("cipher", "aes"); !validCipher(cipher) {
l.Error("Unknown cipher, a restart with it would fail", "cipher", cipher)
r.Failed()
} else if cipher == "chachapoly" && fipsOnly() {
// newCipherSuite refuses it at startup
l.Error("ChaChaPoly is not allowed in FIPS 140-only mode, a restart with it would fail", "cipher", cipher)
r.Failed()
} else if cipher != pki.getCertState().cipher {
r.RestartRequiredIfChanged("cipher")
}
rErr := pki.reload(c, false, r)
if rErr != nil {
util.LogWithContextIfNeeded("Failed to reload PKI from config", rErr, l)
}
@@ -75,13 +92,29 @@ func (p *PKI) getCertState() *CertState {
return p.cs.Load()
}
func (p *PKI) reload(c *config.C, initial bool) error {
// r is nil on the initial load
func (p *PKI) reload(c *config.C, initial bool, r *config.Reload) error {
before := p.cs.Load()
err := p.reloadCerts(c, initial)
if err != nil {
if initial {
return err
}
err.Log(p.l)
if errors.Is(err, errCertNeedsRestart) {
r.RestartRequired()
} else {
r.Failed()
}
} else if !initial {
// A cert for a version we weren't running is accepted without comparing its networks to ours. The tun and the
// lighthouse keep the networks they started with
after := p.cs.Load()
if !slices.Equal(before.myVpnNetworks, after.myVpnNetworks) {
p.l.Warn("The new cert changes our networks, a restart is required to use them",
"old_networks", before.myVpnNetworks, "new_networks", after.myVpnNetworks)
r.RestartRequired()
}
}
err = p.reloadCAPool(c)
@@ -90,21 +123,27 @@ func (p *PKI) reload(c *config.C, initial bool) error {
return err
}
err.Log(p.l)
r.Failed()
}
return nil
}
// fipsOnly is fips140.Enforced, a variable so a test can run the FIPS 140-only reload check without GODEBUG
var fipsOnly = fips140.Enforced
// validCipher is true for the ciphers nebula can run. Each post-handshake CipherState in noiseutil hardcodes its own
// nonce endianness, so there's nothing to set up for either.
func validCipher(cipher string) bool {
return cipher == "aes" || cipher == "chachapoly"
}
func (p *PKI) reloadCerts(c *config.C, initial bool) *util.ContextualError {
var cipher string
var currentState *CertState
if initial {
cipher = c.GetString("cipher", "aes")
switch cipher {
case "aes", "chachapoly":
// Each post-handshake CipherState in noiseutil hardcodes its own
// nonce endianness now, so there's nothing to set up here.
default:
if !validCipher(cipher) {
return util.NewContextualError(
"unknown cipher",
m{"cipher": cipher},
@@ -132,7 +171,7 @@ func (p *PKI) reloadCerts(c *config.C, initial bool) *util.ContextualError {
return util.NewContextualError(
"Networks in new cert was different from old",
m{"new_networks": newState.v1Cert.Networks(), "old_networks": currentState.v1Cert.Networks(), "cert_version": cert.Version1},
nil,
errCertNeedsRestart,
)
}
@@ -140,7 +179,7 @@ func (p *PKI) reloadCerts(c *config.C, initial bool) *util.ContextualError {
return util.NewContextualError(
"Curve in new v1 cert was different from old",
m{"new_curve": newState.v1Cert.Curve(), "old_curve": currentState.v1Cert.Curve(), "cert_version": cert.Version1},
nil,
errCertNeedsRestart,
)
}
}
@@ -155,7 +194,7 @@ func (p *PKI) reloadCerts(c *config.C, initial bool) *util.ContextualError {
return util.NewContextualError(
"Networks in new cert was different from old",
m{"new_networks": newState.v2Cert.Networks(), "old_networks": currentState.v2Cert.Networks(), "cert_version": cert.Version2},
nil,
errCertNeedsRestart,
)
}
@@ -163,7 +202,7 @@ func (p *PKI) reloadCerts(c *config.C, initial bool) *util.ContextualError {
return util.NewContextualError(
"Curve in new cert was different from old",
m{"new_curve": newState.v2Cert.Curve(), "old_curve": currentState.v2Cert.Curve(), "cert_version": cert.Version2},
nil,
errCertNeedsRestart,
)
}
}
@@ -178,7 +217,7 @@ func (p *PKI) reloadCerts(c *config.C, initial bool) *util.ContextualError {
return util.NewContextualError(
"Removing a V2 cert is not permitted unless it has identical networks to the new V1 cert",
m{"new_v1_networks": newState.v1Cert.Networks(), "old_v2_networks": currentState.v2Cert.Networks()},
nil,
errCertNeedsRestart,
)
}
}
@@ -196,12 +235,14 @@ func (p *PKI) reloadCerts(c *config.C, initial bool) *util.ContextualError {
func (p *PKI) reloadCAPool(c *config.C) *util.ContextualError {
caPool, err := loadCAPoolFromConfig(p.l, c)
if caPool != nil {
p.caPool.Store(caPool)
p.l.Debug("Trusted CA fingerprints", "fingerprints", caPool.GetFingerprints())
}
if err != nil {
return util.NewContextualError("Failed to load ca from config", nil, err)
}
p.caPool.Store(caPool)
p.l.Debug("Trusted CA fingerprints", "fingerprints", caPool.GetFingerprints())
return nil
}
@@ -576,11 +617,22 @@ func loadCAPoolFromConfig(l *slog.Logger, c *config.C) (*cert.CAPool, error) {
bl := c.GetStringSlice("pki.blocklist", []string{})
if len(bl) > 0 {
for _, fp := range bl {
var bad []string
for i, raw := range bl {
// Fingerprints are compared as lowercase hex strings, a malformed entry would silently block nothing
fp := strings.ToLower(strings.TrimSpace(raw))
if b, err := hex.DecodeString(fp); err != nil || len(b) != sha256.Size {
bad = append(bad, fmt.Sprintf("entry %d %q", i+1, raw))
continue
}
caPool.BlocklistFingerprint(fp)
}
l.Info("Blocklisted certificates", "fingerprintCount", len(bl))
l.Info("Blocklisted certificates", "fingerprintCount", len(bl)-len(bad))
if len(bad) > 0 {
// The valid entries are still returned so a failed reload blocks them, startup refuses the error
return caPool, fmt.Errorf("pki.blocklist entries are not hex certificate fingerprints: %s", strings.Join(bad, ", "))
}
}
return caPool, nil
+168
View File
@@ -1,10 +1,17 @@
package nebula
import (
"crypto/fips140"
"fmt"
"net/netip"
"strings"
"testing"
"time"
"github.com/slackhq/nebula/cert"
"github.com/slackhq/nebula/cert_test"
"github.com/slackhq/nebula/config"
"github.com/slackhq/nebula/test"
"github.com/stretchr/testify/assert"
"github.com/stretchr/testify/require"
)
@@ -92,3 +99,164 @@ func TestNewCipherSuiteUnsupportedCurve(t *testing.T) {
assert.True(t, strings.HasPrefix(err.Error(), "unsupported curve:"), "got: %v", err)
assert.Nil(t, cs)
}
func TestPKIReloadRestartRequired(t *testing.T) {
ca, _, caKey, caPEM := cert_test.NewTestCaCert(cert.Version2, cert.Curve_CURVE25519, time.Time{}, time.Time{}, nil, nil, nil)
pkiConfig := func(cipher, network string) string {
_, _, keyPEM, certPEM := cert_test.NewTestCert(cert.Version2, cert.Curve_CURVE25519, ca, caKey, "host", time.Time{}, time.Time{}, []netip.Prefix{netip.MustParsePrefix(network)}, nil, nil)
return fmt.Sprintf("cipher: %s\npki:\n ca: %q\n cert: %q\n key: %q\n", cipher, caPEM, certPEM, keyPEM)
}
c := config.NewC(test.NewLogger())
require.NoError(t, c.LoadString(pkiConfig("aes", "10.1.0.2/24")))
p, err := NewPKIFromConfig(test.NewLogger(), c)
require.NoError(t, err)
// A cert that changes our networks is refused and needs a restart, it is not a failure
res := c.ReloadConfigString(pkiConfig("aes", "10.1.0.3/24"))
require.NoError(t, res.Err)
assert.True(t, res.RestartRequired)
assert.False(t, res.Failed)
assert.Equal(t, []netip.Prefix{netip.MustParsePrefix("10.1.0.2/24")}, p.getCertState().myVpnNetworks)
// The cipher only applies at startup
c2 := config.NewC(test.NewLogger())
require.NoError(t, c2.LoadString(pkiConfig("aes", "10.1.0.2/24")))
p, err = NewPKIFromConfig(test.NewLogger(), c2)
require.NoError(t, err)
res = c2.ReloadConfigString(pkiConfig("chachapoly", "10.1.0.2/24"))
require.NoError(t, res.Err)
assert.True(t, res.RestartRequired)
assert.Equal(t, "aes", p.getCertState().cipher)
// A cipher we can't run would fail the restart, so it fails the reload instead of asking for one
c4 := config.NewC(test.NewLogger())
require.NoError(t, c4.LoadString(pkiConfig("aes", "10.1.0.2/24")))
_, err = NewPKIFromConfig(test.NewLogger(), c4)
require.NoError(t, err)
for range 2 {
res = c4.ReloadConfigString(pkiConfig("nope", "10.1.0.2/24"))
require.NoError(t, res.Err)
assert.True(t, res.Failed, "a bad cipher that didn't change since the last reload is still bad")
assert.False(t, res.RestartRequired)
}
// Fixing it back to the running cipher needs nothing
res = c4.ReloadConfigString(pkiConfig("aes", "10.1.0.2/24"))
require.NoError(t, res.Err)
assert.False(t, res.Failed)
assert.False(t, res.RestartRequired)
// A cert that keeps our networks applies without a restart
c3 := config.NewC(test.NewLogger())
require.NoError(t, c3.LoadString(pkiConfig("aes", "10.1.0.2/24")))
_, err = NewPKIFromConfig(test.NewLogger(), c3)
require.NoError(t, err)
res = c3.ReloadConfigString(pkiConfig("aes", "10.1.0.2/24"))
require.NoError(t, res.Err)
assert.False(t, res.RestartRequired)
// A cert that can't be read is a failure, and a restart wouldn't help
res = c3.ReloadConfigString(strings.Replace(pkiConfig("aes", "10.1.0.2/24"), "cert: \"", "cert: \"garbage", 1))
require.NoError(t, res.Err)
assert.True(t, res.Failed)
assert.False(t, res.RestartRequired)
}
// A cert for a version we weren't running is accepted without comparing networks, so switching to one with different
// networks needs a restart. One with the same networks doesn't
func TestPKIReloadNewVersionWithOtherNetworks(t *testing.T) {
ca1, _, ca1Key, ca1PEM := cert_test.NewTestCaCert(cert.Version1, cert.Curve_CURVE25519, time.Time{}, time.Time{}, nil, nil, nil)
ca2, _, ca2Key, ca2PEM := cert_test.NewTestCaCert(cert.Version2, cert.Curve_CURVE25519, time.Time{}, time.Time{}, nil, nil, nil)
caPEM := string(ca1PEM) + string(ca2PEM)
pkiConfig := func(v cert.Version, network string) string {
ca, caKey := ca1, ca1Key
if v == cert.Version2 {
ca, caKey = ca2, ca2Key
}
_, _, keyPEM, certPEM := cert_test.NewTestCert(v, cert.Curve_CURVE25519, ca, caKey, "host", time.Time{}, time.Time{}, []netip.Prefix{netip.MustParsePrefix(network)}, nil, nil)
return fmt.Sprintf("pki:\n ca: %q\n cert: %q\n key: %q\n", caPEM, certPEM, keyPEM)
}
for _, tc := range []struct {
network string
restart bool
}{
{"10.9.0.7/24", true},
{"10.1.0.2/24", false},
} {
c := config.NewC(test.NewLogger())
require.NoError(t, c.LoadString(pkiConfig(cert.Version1, "10.1.0.2/24")))
p, err := NewPKIFromConfig(test.NewLogger(), c)
require.NoError(t, err)
res := c.ReloadConfigString(pkiConfig(cert.Version2, tc.network))
require.NoError(t, res.Err)
assert.False(t, res.Failed, tc.network)
assert.Equal(t, tc.restart, res.RestartRequired, tc.network)
assert.Equal(t, []netip.Prefix{netip.MustParsePrefix(tc.network)}, p.getCertState().myVpnNetworks, "accepted either way, as before")
}
}
// FIPS 140-only mode refuses chachapoly at startup, so reloading to it fails rather than asks for a restart
func TestPKIReloadChachapolyInFIPSOnlyFails(t *testing.T) {
fipsOnly = func() bool { return true }
t.Cleanup(func() { fipsOnly = fips140.Enforced })
ca, _, caKey, caPEM := cert_test.NewTestCaCert(cert.Version2, cert.Curve_P256, time.Time{}, time.Time{}, nil, nil, nil)
_, _, keyPEM, certPEM := cert_test.NewTestCert(cert.Version2, cert.Curve_P256, ca, caKey, "host", time.Time{}, time.Time{}, []netip.Prefix{netip.MustParsePrefix("10.1.0.2/24")}, nil, nil)
pkiConfig := func(cipher string) string {
return fmt.Sprintf("cipher: %s\npki:\n ca: %q\n cert: %q\n key: %q\n", cipher, caPEM, certPEM, keyPEM)
}
c := config.NewC(test.NewLogger())
require.NoError(t, c.LoadString(pkiConfig("aes")))
_, err := NewPKIFromConfig(test.NewLogger(), c)
require.NoError(t, err)
res := c.ReloadConfigString(pkiConfig("chachapoly"))
require.NoError(t, res.Err)
assert.True(t, res.Failed)
assert.False(t, res.RestartRequired)
}
func TestLoadCAPoolBlocklist(t *testing.T) {
ca, _, caKey, caPEM := cert_test.NewTestCaCert(cert.Version2, cert.Curve_CURVE25519, time.Time{}, time.Time{}, nil, nil, nil)
crt, _, _, _ := cert_test.NewTestCert(cert.Version2, cert.Curve_CURVE25519, ca, caKey, "host", time.Time{}, time.Time{}, []netip.Prefix{netip.MustParsePrefix("10.1.0.2/24")}, nil, nil)
fp, err := crt.Fingerprint()
require.NoError(t, err)
load := func(entry string) (*cert.CAPool, error) {
c := config.NewC(test.NewLogger())
require.NoError(t, c.LoadString(fmt.Sprintf("pki:\n ca: %q\n blocklist:\n - %q\n", caPEM, entry)))
return loadCAPoolFromConfig(test.NewLogger(), c)
}
for _, entry := range []string{fp, strings.ToUpper(fp), " " + fp + "\t"} {
pool, err := load(entry)
require.NoError(t, err, entry)
assert.True(t, pool.IsBlocklisted(fp), entry)
}
for _, entry := range []string{fp[1:], fp + "00", "sha256:" + fp, "zz" + fp[2:], ""} {
_, err := load(entry)
require.Error(t, err, entry)
}
// A bad entry on reload fails it, the valid entries are still blocked
_, _, keyPEM, certPEM := cert_test.NewTestCert(cert.Version2, cert.Curve_CURVE25519, ca, caKey, "me", time.Time{}, time.Time{}, []netip.Prefix{netip.MustParsePrefix("10.1.0.1/24")}, nil, nil)
pkiConfig := func(entry string) string {
return fmt.Sprintf("pki:\n ca: %q\n cert: %q\n key: %q\n blocklist:\n - %q\n", caPEM, certPEM, keyPEM, entry)
}
c := config.NewC(test.NewLogger())
require.NoError(t, c.LoadString(pkiConfig(fp)))
p, err := NewPKIFromConfig(test.NewLogger(), c)
require.NoError(t, err)
other, _, _, _ := cert_test.NewTestCert(cert.Version2, cert.Curve_CURVE25519, ca, caKey, "other", time.Time{}, time.Time{}, []netip.Prefix{netip.MustParsePrefix("10.1.0.3/24")}, nil, nil)
otherFp, err := other.Fingerprint()
require.NoError(t, err)
res := c.ReloadConfigString(pkiConfig(fp) + fmt.Sprintf(" - %q\n - %q\n", otherFp, fp[1:]))
assert.True(t, res.Failed)
assert.True(t, p.GetCAPool().IsBlocklisted(fp))
assert.True(t, p.GetCAPool().IsBlocklisted(otherFp))
}
+2 -1
View File
@@ -67,7 +67,8 @@ func NewPunchyFromConfig(l *slog.Logger, c *config.C, punchConn udp.Conn) *Punch
}
p.reload(c, true)
c.RegisterReloadCallback(func(c *config.C) {
c.RegisterReloadCallback(func(c *config.C, r *config.Reload) {
r.RestartRequiredIfChanged("stats.lighthouse_metrics")
p.reload(c, false)
})
+16 -6
View File
@@ -76,7 +76,7 @@ punchy:
punch: true
delay: 10m
respond: true
`))
`).Err)
p.reload(c, false)
assert.True(t, p.punch.Load())
assert.Equal(t, newDelay, time.Duration(p.delay.Load()))
@@ -170,7 +170,7 @@ func TestPunchy_LogFormat_ReloadPunch(t *testing.T) {
NewPunchyFromConfig(l, c, nil)
hook.entries = nil
require.NoError(t, c.ReloadConfigString(`punchy: {punch: true}`))
require.NoError(t, c.ReloadConfigString(`punchy: {punch: true}`).Err)
entry := findEntry(t, hook.entries, "punchy.punch changed")
assert.Equal(t, slog.LevelInfo, entry.Level)
@@ -184,7 +184,7 @@ func TestPunchy_LogFormat_ReloadRespond(t *testing.T) {
NewPunchyFromConfig(l, c, nil)
hook.entries = nil
require.NoError(t, c.ReloadConfigString(`punchy: {respond: true}`))
require.NoError(t, c.ReloadConfigString(`punchy: {respond: true}`).Err)
entry := findEntry(t, hook.entries, "punchy.respond changed")
assert.Equal(t, slog.LevelInfo, entry.Level)
@@ -198,7 +198,7 @@ func TestPunchy_LogFormat_ReloadDelay(t *testing.T) {
NewPunchyFromConfig(l, c, nil)
hook.entries = nil
require.NoError(t, c.ReloadConfigString(`punchy: {delay: 10s}`))
require.NoError(t, c.ReloadConfigString(`punchy: {delay: 10s}`).Err)
entry := findEntry(t, hook.entries, "punchy.delay changed")
assert.Equal(t, slog.LevelInfo, entry.Level)
@@ -212,7 +212,7 @@ func TestPunchy_LogFormat_ReloadTargetAllRemotes(t *testing.T) {
NewPunchyFromConfig(l, c, nil)
hook.entries = nil
require.NoError(t, c.ReloadConfigString(`punchy: {target_all_remotes: true}`))
require.NoError(t, c.ReloadConfigString(`punchy: {target_all_remotes: true}`).Err)
entry := findEntry(t, hook.entries, "punchy.target_all_remotes changed")
assert.Equal(t, slog.LevelInfo, entry.Level)
@@ -226,9 +226,19 @@ func TestPunchy_LogFormat_ReloadRespondDelay(t *testing.T) {
NewPunchyFromConfig(l, c, nil)
hook.entries = nil
require.NoError(t, c.ReloadConfigString(`punchy: {respond_delay: 15s}`))
require.NoError(t, c.ReloadConfigString(`punchy: {respond_delay: 15s}`).Err)
entry := findEntry(t, hook.entries, "punchy.respond_delay changed")
assert.Equal(t, slog.LevelInfo, entry.Level)
assert.Equal(t, map[string]any{"respond_delay": 15 * time.Second}, entry.Attrs)
}
func TestPunchyReloadRestartRequired(t *testing.T) {
c := config.NewC(test.NewLogger())
require.NoError(t, c.LoadString("stats:\n lighthouse_metrics: false\n"))
NewPunchyFromConfig(test.NewLogger(), c, nil)
res := c.ReloadConfigString("stats:\n lighthouse_metrics: true\n")
require.NoError(t, res.Err)
assert.True(t, res.RestartRequired)
}
+2 -1
View File
@@ -28,10 +28,11 @@ func NewRelayManager(ctx context.Context, l *slog.Logger, hostmap *HostMap, c *c
hostmap: hostmap,
}
rm.reload(c, true)
c.RegisterReloadCallback(func(c *config.C) {
c.RegisterReloadCallback(func(c *config.C, r *config.Reload) {
err := rm.reload(c, false)
if err != nil {
rm.l.Error("Failed to reload relay_manager", "error", err)
r.Failed()
}
})
return rm
+25 -10
View File
@@ -1,8 +1,8 @@
package service
import (
"io"
"net"
"sync"
)
type tcpListener struct {
@@ -10,23 +10,38 @@ type tcpListener struct {
s *Service
addr *net.TCPAddr
accept chan net.Conn
// closed is closed instead of accept so a handler blocked handing off a
// connection can't send on a closed channel.
closed chan struct{}
closeOnce sync.Once
}
func (l *tcpListener) Accept() (net.Conn, error) {
conn, ok := <-l.accept
if !ok {
return nil, io.EOF
// select picks randomly among ready cases, so without this a handler still
// waiting to hand off could win over closed after Close has returned.
select {
case <-l.closed:
return nil, net.ErrClosed
default:
}
select {
case conn := <-l.accept:
return conn, nil
case <-l.closed:
return nil, net.ErrClosed
}
return conn, nil
}
func (l *tcpListener) Close() error {
l.s.mu.Lock()
defer l.s.mu.Unlock()
delete(l.s.mu.listeners, uint16(l.addr.Port))
close(l.accept)
l.closeOnce.Do(func() {
l.s.mu.Lock()
delete(l.s.mu.listeners, l.port)
l.s.mu.Unlock()
close(l.closed)
})
return nil
}
+9 -3
View File
@@ -231,6 +231,7 @@ func (s *Service) Listen(network, address string) (net.Listener, error) {
s: s,
addr: addr,
accept: make(chan net.Conn),
closed: make(chan struct{}),
}
s.mu.Lock()
@@ -257,9 +258,8 @@ func (s *Service) tcpHandler(r *tcp.ForwarderRequest) {
endpointID := r.ID()
s.mu.Lock()
defer s.mu.Unlock()
l, ok := s.mu.listeners[endpointID.LocalPort]
s.mu.Unlock()
if !ok {
r.Complete(true)
return
@@ -275,6 +275,12 @@ func (s *Service) tcpHandler(r *tcp.ForwarderRequest) {
r.Complete(false)
ep.SocketOptions().SetKeepAlive(true)
// The handoff blocks until Accept is called, so it must not hold s.mu or a
// listener nobody accepts from stalls every other port.
conn := gonet.NewTCPConn(&wq, ep)
l.accept <- conn
select {
case l.accept <- conn:
case <-l.closed:
_ = conn.Close()
}
}
+139
View File
@@ -188,3 +188,142 @@ func TestService(t *testing.T) {
t.Fatal(err)
}
}
// A listener that is never accepted from must not stall connections to other
// ports, and closing it must not block.
func TestServiceUnacceptedListener(t *testing.T) {
lighthousePort := ephemeralUDPPort(t)
ca, _, caKey, _ := cert_test.NewTestCaCert(cert.Version2, cert.Curve_CURVE25519, time.Now(), time.Now().Add(10*time.Minute), nil, nil, []string{})
a := newSimpleService(ca, caKey, "a", netip.MustParseAddr("10.0.0.1"), m{
"static_host_map": m{},
"lighthouse": m{
"am_lighthouse": true,
},
"listen": m{
"host": "0.0.0.0",
"port": lighthousePort,
},
})
t.Cleanup(func() { _ = a.Close() })
b := newSimpleService(ca, caKey, "b", netip.MustParseAddr("10.0.0.2"), m{
"static_host_map": m{
"10.0.0.1": []string{fmt.Sprintf("127.0.0.1:%d", lighthousePort)},
},
"lighthouse": m{
"hosts": []string{"10.0.0.1"},
"interval": 1,
},
})
t.Cleanup(func() { _ = b.Close() })
idle, err := a.Listen("tcp", ":1234")
if err != nil {
t.Fatal(err)
}
active, err := a.Listen("tcp", ":1235")
if err != nil {
t.Fatal(err)
}
ctx, cancel := context.WithTimeout(context.Background(), 10*time.Second)
defer cancel()
idleConn, err := b.DialContext(ctx, "tcp", "10.0.0.1:1234")
if err != nil {
t.Fatal(err)
}
defer idleConn.Close()
accepted := make(chan error, 1)
go func() {
conn, err := active.Accept()
if err == nil {
err = conn.Close()
}
accepted <- err
}()
ctx, cancel = context.WithTimeout(context.Background(), 5*time.Second)
defer cancel()
activeConn, err := b.DialContext(ctx, "tcp", "10.0.0.1:1235")
if err != nil {
t.Fatalf("dial to accepted port stalled behind idle listener: %v", err)
}
defer activeConn.Close()
select {
case err := <-accepted:
if err != nil {
t.Fatal(err)
}
case <-time.After(5 * time.Second):
t.Fatal("accept stalled behind idle listener")
}
closed := make(chan error, 1)
go func() { closed <- idle.Close() }()
select {
case err := <-closed:
if err != nil {
t.Fatal(err)
}
case <-time.After(5 * time.Second):
t.Fatal("closing idle listener blocked")
}
if _, err := idle.Accept(); !errors.Is(err, net.ErrClosed) {
t.Fatalf("expected net.ErrClosed from closed listener, got %v", err)
}
if err := idle.Close(); err != nil {
t.Fatalf("second close: %v", err)
}
}
// Accept must report net.ErrClosed after Close even while a handler is still
// trying to hand off a connection.
func TestListenerAcceptAfterClose(t *testing.T) {
s := &Service{}
s.mu.listeners = map[uint16]*tcpListener{}
l := &tcpListener{
port: 1234,
s: s,
accept: make(chan net.Conn),
closed: make(chan struct{}),
}
s.mu.listeners[l.port] = l
if err := l.Close(); err != nil {
t.Fatal(err)
}
// Keep a send pending so every Accept has a connection ready alongside closed.
stop := make(chan struct{})
done := make(chan struct{})
go func() {
defer close(done)
for {
server, client := net.Pipe()
_ = client.Close()
select {
case l.accept <- server:
case <-stop:
_ = server.Close()
return
}
}
}()
defer func() {
close(stop)
<-done
}()
for range 100 {
time.Sleep(time.Millisecond)
conn, err := l.Accept()
if conn != nil {
_ = conn.Close()
}
if !errors.Is(err, net.ErrClosed) {
t.Fatalf("Accept after Close: got err %v, want net.ErrClosed", err)
}
}
}
+28 -180
View File
@@ -11,11 +11,8 @@ import (
"net"
"net/netip"
"os"
"path/filepath"
"runtime"
"runtime/pprof"
"slices"
"sort"
"strconv"
"strings"
"github.com/slackhq/nebula/config"
@@ -58,12 +55,12 @@ type sshDeviceInfoFlags struct {
}
func wireSSHReload(l *slog.Logger, ssh *sshd.SSHServer, c *config.C) {
c.RegisterReloadCallback(func(c *config.C) {
c.RegisterReloadCallback(func(c *config.C, r *config.Reload) {
if c.GetBool("sshd.enabled", false) {
// Restarting the server drops every open session, the one that asked for this reload included. Only restart
// when it isn't running or its config changed. The host key file can change under the same config, new
// handshakes use the new key without a restart
if ssh.Running() && !c.HasChanged("sshd") {
if ssh.Running() && !slices.ContainsFunc(sshdServerKeys, c.HasChanged) {
key, err := loadSSHHostKey(c)
if err == nil {
err = ssh.SetHostKey(key)
@@ -71,13 +68,15 @@ func wireSSHReload(l *slog.Logger, ssh *sshd.SSHServer, c *config.C) {
if err != nil {
l.Error("Failed to reconfigure the sshd", "error", err)
ssh.Stop()
r.Failed()
}
return
}
sshRun, err := configSSH(l, ssh, c)
sshRun, err := configSSH(l, ssh, c, r)
if err != nil {
l.Error("Failed to reconfigure the sshd", "error", err)
ssh.Stop()
r.Failed()
}
if sshRun != nil {
go sshRun()
@@ -88,6 +87,9 @@ func wireSSHReload(l *slog.Logger, ssh *sshd.SSHServer, c *config.C) {
})
}
// sshdServerKeys are what configSSH reads
var sshdServerKeys = []string{"sshd.enabled", "sshd.listen", "sshd.host_key", "sshd.trusted_cas", "sshd.authorized_users"}
// loadSSHHostKey returns sshd.host_key, read from its file when it names one.
func loadSSHHostKey(c *config.C) ([]byte, error) {
hostKeyPathOrKey := c.GetString("sshd.host_key", "")
@@ -108,7 +110,8 @@ func loadSSHHostKey(c *config.C) ([]byte, error) {
// updates the passed-in SSHServer. On success, it returns a function
// that callers may invoke to run the configured ssh server. On
// failure, it returns nil, error.
func configSSH(l *slog.Logger, ssh *sshd.SSHServer, c *config.C) (func(), error) {
// r is nil at startup, entries that are skipped with a warning fail it on a reload
func configSSH(l *slog.Logger, ssh *sshd.SSHServer, c *config.C, r *config.Reload) (func(), error) {
listen := c.GetString("sshd.listen", "")
if listen == "" {
return nil, fmt.Errorf("sshd.listen must be provided")
@@ -141,6 +144,7 @@ func configSSH(l *slog.Logger, ssh *sshd.SSHServer, c *config.C) (func(), error)
err := ssh.AddTrustedCA(caAuthorizedKey)
if err != nil {
l.Warn("SSH CA had an error, ignoring", "error", err, "sshCA", caAuthorizedKey)
r.Failed()
continue
}
}
@@ -152,12 +156,14 @@ func configSSH(l *slog.Logger, ssh *sshd.SSHServer, c *config.C) (func(), error)
kDef, ok := rk.(map[string]any)
if !ok {
l.Warn("Authorized user had an error, ignoring", "sshKeyConfig", rk)
r.Failed()
continue
}
user, ok := kDef["user"].(string)
if !ok {
l.Warn("Authorized user is missing the user field", "sshKeyConfig", rk)
r.Failed()
continue
}
@@ -171,6 +177,7 @@ func configSSH(l *slog.Logger, ssh *sshd.SSHServer, c *config.C) (func(), error)
"sshKeyConfig", rk,
"sshKey", v,
)
r.Failed()
continue
}
@@ -182,6 +189,7 @@ func configSSH(l *slog.Logger, ssh *sshd.SSHServer, c *config.C) (func(), error)
"sshKeyConfig", rk,
"sshKey", subK,
)
r.Failed()
continue
}
@@ -191,12 +199,14 @@ func configSSH(l *slog.Logger, ssh *sshd.SSHServer, c *config.C) (func(), error)
"error", err,
"sshKeyConfig", sk,
)
r.Failed()
continue
}
}
default:
l.Warn("Authorized user is missing the keys field or was not understood", "sshKeyConfig", rk)
r.Failed()
}
}
} else {
@@ -219,12 +229,6 @@ func configSSH(l *slog.Logger, ssh *sshd.SSHServer, c *config.C) (func(), error)
}
func attachCommands(l *slog.Logger, c *config.C, ssh *sshd.SSHServer, f *Interface) {
// sandboxDir defaults to a dir in temp. The intention is that end user will
// create this dir as needed. Overriding this config value to "" allows
// writing to anywhere in the system.
defaultDir := filepath.Join(os.TempDir(), "nebula-debug")
sandboxDir := c.GetString("sshd.sandbox_dir", defaultDir)
ssh.RegisterCommand(&sshd.Command{
Name: "list-hostmap",
ShortDescription: "List all known previously connected hosts",
@@ -276,46 +280,7 @@ func attachCommands(l *slog.Logger, c *config.C, ssh *sshd.SSHServer, f *Interfa
Name: "reload",
ShortDescription: "Reloads configuration from disk, same as sending HUP to the process",
Callback: func(fs any, a []string, w sshd.StringWriter) error {
return sshReload(c, w)
},
})
ssh.RegisterCommand(&sshd.Command{
Name: "start-cpu-profile",
ShortDescription: "Starts a cpu profile and write output to the provided file, ex: `cpu-profile.pb.gz`",
Callback: func(fs any, a []string, w sshd.StringWriter) error {
return sshStartCpuProfile(sandboxDir, fs, a, w)
},
})
ssh.RegisterCommand(&sshd.Command{
Name: "stop-cpu-profile",
ShortDescription: "Stops a cpu profile and writes output to the previously provided file",
Callback: func(fs any, a []string, w sshd.StringWriter) error {
pprof.StopCPUProfile()
return w.WriteLine("If a CPU profile was running it is now stopped")
},
})
ssh.RegisterCommand(&sshd.Command{
Name: "save-heap-profile",
ShortDescription: "Saves a heap profile to the provided path, ex: `heap-profile.pb.gz`",
Callback: func(fs any, a []string, w sshd.StringWriter) error {
return sshGetHeapProfile(sandboxDir, fs, a, w)
},
})
ssh.RegisterCommand(&sshd.Command{
Name: "mutex-profile-fraction",
ShortDescription: "Gets or sets runtime.SetMutexProfileFraction",
Callback: sshMutexProfileFraction,
})
ssh.RegisterCommand(&sshd.Command{
Name: "save-mutex-profile",
ShortDescription: "Saves a mutex profile to the provided path, ex: `mutex-profile.pb.gz`",
Callback: func(fs any, a []string, w sshd.StringWriter) error {
return sshGetMutexProfile(sandboxDir, fs, a, w)
return sshReload(l, c, w)
},
})
@@ -549,58 +514,6 @@ func sshListLighthouseMap(lightHouse *LightHouse, a any, w sshd.StringWriter) er
return nil
}
// sshSanitizeFilePath validates that the given file path is within the sandbox directory.
// If sandboxDir is empty, the path is returned as-is for backwards compatibility.
func sshSanitizeFilePath(sandboxDir, filePath string) (string, error) {
if sandboxDir == "" {
return filePath, nil
}
// Clean and resolve the path relative to the sandbox directory
if !filepath.IsAbs(filePath) {
filePath = filepath.Join(sandboxDir, filePath)
}
cleaned := filepath.Clean(filePath)
// Ensure the resolved path is within the sandbox directory
cleanedSandbox := filepath.Clean(sandboxDir)
if cleaned == cleanedSandbox {
return "", fmt.Errorf("path %q resolves to the sandbox directory itself %q", filePath, sandboxDir)
}
if !strings.HasPrefix(cleaned, cleanedSandbox+string(filepath.Separator)) {
return "", fmt.Errorf("path %q is outside the sandbox directory %q", filePath, sandboxDir)
}
return cleaned, nil
}
func sshStartCpuProfile(sandboxDir string, fs any, a []string, w sshd.StringWriter) error {
if len(a) == 0 {
err := w.WriteLine("No path to write profile provided")
return err
}
filePath, err := sshSanitizeFilePath(sandboxDir, a[0])
if err != nil {
return w.WriteLine(err.Error())
}
file, err := os.Create(filePath)
if err != nil {
err = w.WriteLine(fmt.Sprintf("Unable to create profile file: %s", err))
return err
}
err = pprof.StartCPUProfile(file)
if err != nil {
err = w.WriteLine(fmt.Sprintf("Unable to start cpu profile: %s", err))
return err
}
err = w.WriteLine(fmt.Sprintf("Started cpu profile, issue stop-cpu-profile to write the output to %s", a))
return err
}
func sshVersion(ifce *Interface, fs any, a []string, w sshd.StringWriter) error {
return w.WriteLine(fmt.Sprintf("%s", ifce.version))
}
@@ -753,76 +666,6 @@ func sshChangeRemote(ifce *Interface, fs any, a []string, w sshd.StringWriter) e
return w.WriteLine("Changed")
}
func sshGetHeapProfile(sandboxDir string, fs any, a []string, w sshd.StringWriter) error {
if len(a) == 0 {
return w.WriteLine("No path to write profile provided")
}
filePath, err := sshSanitizeFilePath(sandboxDir, a[0])
if err != nil {
return w.WriteLine(err.Error())
}
file, err := os.Create(filePath)
if err != nil {
err = w.WriteLine(fmt.Sprintf("Unable to create profile file: %s", err))
return err
}
err = pprof.WriteHeapProfile(file)
if err != nil {
err = w.WriteLine(fmt.Sprintf("Unable to write profile: %s", err))
return err
}
err = w.WriteLine(fmt.Sprintf("Mem profile created at %s", a))
return err
}
func sshMutexProfileFraction(fs any, a []string, w sshd.StringWriter) error {
if len(a) == 0 {
rate := runtime.SetMutexProfileFraction(-1)
return w.WriteLine(fmt.Sprintf("Current value: %d", rate))
}
newRate, err := strconv.Atoi(a[0])
if err != nil {
return w.WriteLine(fmt.Sprintf("Invalid argument: %s", a[0]))
}
oldRate := runtime.SetMutexProfileFraction(newRate)
return w.WriteLine(fmt.Sprintf("New value: %d. Old value: %d", newRate, oldRate))
}
func sshGetMutexProfile(sandboxDir string, fs any, a []string, w sshd.StringWriter) error {
if len(a) == 0 {
return w.WriteLine("No path to write profile provided")
}
filePath, err := sshSanitizeFilePath(sandboxDir, a[0])
if err != nil {
return w.WriteLine(err.Error())
}
file, err := os.Create(filePath)
if err != nil {
return w.WriteLine(fmt.Sprintf("Unable to create profile file: %s", err))
}
defer file.Close()
mutexProfile := pprof.Lookup("mutex")
if mutexProfile == nil {
return w.WriteLine("Unable to get pprof.Lookup(\"mutex\")")
}
err = mutexProfile.WriteTo(file, 0)
if err != nil {
return w.WriteLine(fmt.Sprintf("Unable to write profile: %s", err))
}
return w.WriteLine(fmt.Sprintf("Mutex profile created at %s", a))
}
func sshLogLevel(l *slog.Logger, fs any, a []string, w sshd.StringWriter) error {
ctrl, ok := l.Handler().(interface {
GetLevel() slog.Level
@@ -1075,8 +918,13 @@ func sshDeviceInfo(ifce *Interface, fs any, w sshd.StringWriter) error {
}
}
func sshReload(c *config.C, w sshd.StringWriter) error {
err := w.WriteLine("Reloading config")
c.ReloadConfig()
return err
// sshReload reloads the config and writes the result to the client. It reloads even if the client has gone away
func sshReload(l *slog.Logger, c *config.C, w sshd.StringWriter) error {
writeErr := w.WriteLine("Reloading config")
res := c.ReloadConfig()
res.Log(l)
if err := w.WriteLine(res.String()); writeErr == nil {
writeErr = err
}
return writeErr
}
+83
View File
@@ -0,0 +1,83 @@
package nebula
import (
"errors"
"io"
"os"
"path/filepath"
"testing"
"github.com/slackhq/nebula/config"
"github.com/slackhq/nebula/test"
"github.com/stretchr/testify/assert"
"github.com/stretchr/testify/require"
)
type lineWriter struct {
lines []string
err error
}
func (w *lineWriter) WriteLine(s string) error {
w.lines = append(w.lines, s)
return w.err
}
func (w *lineWriter) Write(s string) error { return w.WriteLine(s) }
func (w *lineWriter) WriteBytes(b []byte) error { return w.WriteLine(string(b)) }
func (w *lineWriter) GetWriter() io.Writer { return io.Discard }
func TestSSHReloadReportsTheResult(t *testing.T) {
dir := t.TempDir()
write := func(body string) {
require.NoError(t, os.WriteFile(filepath.Join(dir, "config.yml"), []byte(body), 0o600))
}
write("a: 1\nb: 1")
l := test.NewLogger()
c := config.NewC(l)
require.NoError(t, c.Load(dir))
fail := false
c.RegisterReloadCallback(func(c *config.C, r *config.Reload) {
r.RestartRequiredIfChanged("b")
if fail {
r.Failed()
}
})
reload := func() []string {
w := &lineWriter{}
require.NoError(t, sshReload(l, c, w))
return w.lines
}
write("a: 2\nb: 1")
assert.Equal(t, []string{"Reloading config", "Config reload complete"}, reload())
fail = true
write("a: 3\nb: 1")
assert.Equal(t, []string{"Reloading config", "Config reload completed with errors, review the logs"}, reload())
fail = false
write("a: 3\nb: 2")
assert.Equal(t, []string{"Reloading config", "Config reload was completed but requires a restart to fully apply, keys [b]"}, reload())
write("a: [")
lines := reload()
require.Len(t, lines, 2)
assert.Contains(t, lines[1], "Config reload failed, the new config did not load")
assert.Contains(t, lines[1], dir, "names the config that did not load")
}
// A client that went away still gets the reload it asked for
func TestSSHReloadReloadsWhenTheClientIsGone(t *testing.T) {
dir := t.TempDir()
require.NoError(t, os.WriteFile(filepath.Join(dir, "config.yml"), []byte("a: 1"), 0o600))
l := test.NewLogger()
c := config.NewC(l)
require.NoError(t, c.Load(dir))
reloaded := false
c.RegisterReloadCallback(func(*config.C, *config.Reload) { reloaded = true })
gone := errors.New("client is gone")
require.ErrorIs(t, sshReload(l, c, &lineWriter{err: gone}), gone)
assert.True(t, reloaded)
}
+60 -16
View File
@@ -26,13 +26,15 @@ type sshdReloadHarness struct {
server *sshd.SSHServer
keyFile string
signer ssh.Signer
listen string
users []string
extra string
}
func newSSHDReloadHarness(t *testing.T) *sshdReloadHarness {
t.Helper()
l := test.NewLogger()
h := &sshdReloadHarness{keyFile: filepath.Join(t.TempDir(), "host_key")}
h := &sshdReloadHarness{keyFile: filepath.Join(t.TempDir(), "host_key"), listen: "127.0.0.1:0", users: []string{"test"}}
h.writeHostKey(t, newEd25519Key(t))
_, userKey, err := ed25519.GenerateKey(rand.Reader)
@@ -45,7 +47,7 @@ func newSSHDReloadHarness(t *testing.T) *sshdReloadHarness {
h.server, err = sshd.NewSSHServer(t.Context(), l)
require.NoError(t, err)
wireSSHReload(l, h.server, h.c)
run, err := configSSH(l, h.server, h.c)
run, err := configSSH(l, h.server, h.c, nil)
require.NoError(t, err)
go run()
t.Cleanup(h.server.Stop)
@@ -71,8 +73,12 @@ func (h *sshdReloadHarness) writeHostKey(t *testing.T, key crypto.Signer) ssh.Pu
}
func (h *sshdReloadHarness) config() string {
return fmt.Sprintf("sshd:\n enabled: true\n listen: 127.0.0.1:0\n host_key: %s\n authorized_users:\n - user: test\n keys: [%q]\n%s",
h.keyFile, string(ssh.MarshalAuthorizedKey(h.signer.PublicKey())), h.extra)
users := ""
for _, u := range h.users {
users += fmt.Sprintf(" - user: %s\n keys: [%q]\n", u, string(ssh.MarshalAuthorizedKey(h.signer.PublicKey())))
}
return fmt.Sprintf("sshd:\n enabled: true\n listen: %s\n host_key: %s\n authorized_users:\n%s%s",
h.listen, h.keyFile, users, h.extra)
}
// dial connects to wherever the server listens now, a restart on :0 moves it. hostKeyAlgorithms limits which host keys
@@ -130,19 +136,33 @@ func TestSSHDReload_UnchangedKeepsSessions(t *testing.T) {
h := newSSHDReloadHarness(t)
client, _ := h.connect(t)
require.NoError(t, h.c.ReloadConfigString(h.config()+"punchy:\n punch: true\n"))
require.NoError(t, h.c.ReloadConfigString(h.config()+"punchy:\n punch: true\n").Err)
assert.False(t, dropped(client, 500*time.Millisecond), "an unchanged sshd was restarted")
}
// Every key the server reads restarts it when it changes
func TestSSHDReload_ChangedConfigRestarts(t *testing.T) {
h := newSSHDReloadHarness(t)
client, _ := h.connect(t)
cases := map[string]func(t *testing.T, h *sshdReloadHarness){
"listen": func(t *testing.T, h *sshdReloadHarness) { h.listen = "localhost:0" },
"authorized_users": func(t *testing.T, h *sshdReloadHarness) { h.users = append(h.users, "other") },
"trusted_cas": func(t *testing.T, h *sshdReloadHarness) { h.extra = " trusted_cas: []\n" },
"host_key": func(t *testing.T, h *sshdReloadHarness) {
h.keyFile = filepath.Join(t.TempDir(), "other_host_key")
h.writeHostKey(t, newEd25519Key(t))
},
}
for name, change := range cases {
t.Run(name, func(t *testing.T) {
h := newSSHDReloadHarness(t)
client, _ := h.connect(t)
h.extra = " trusted_cas: []\n"
require.NoError(t, h.c.ReloadConfigString(h.config()))
assert.True(t, dropped(client, 5*time.Second), "a changed sshd config was not applied")
require.Eventually(t, h.server.Running, 5*time.Second, 10*time.Millisecond)
h.connect(t)
change(t, h)
require.NoError(t, h.c.ReloadConfigString(h.config()).Err)
assert.True(t, dropped(client, 5*time.Second), "a changed sshd config was not applied")
require.Eventually(t, h.server.Running, 5*time.Second, 10*time.Millisecond)
h.connect(t)
})
}
}
// The config can stay the same while the host key file it names changes. New connections get the new key, open
@@ -152,7 +172,7 @@ func TestSSHDReload_ChangedHostKeyFile(t *testing.T) {
client, _ := h.connect(t)
want := h.writeHostKey(t, newEd25519Key(t))
require.NoError(t, h.c.ReloadConfigString(h.config()))
require.NoError(t, h.c.ReloadConfigString(h.config()).Err)
_, got := h.connect(t)
assert.Equal(t, want.Marshal(), got.Marshal(), "a new host key was not applied")
assert.False(t, dropped(client, 500*time.Millisecond), "a new host key restarted sshd")
@@ -166,7 +186,7 @@ func TestSSHDReload_HostKeyAlgorithmChange(t *testing.T) {
rsaKey, err := rsa.GenerateKey(rand.Reader, 2048)
require.NoError(t, err)
want := h.writeHostKey(t, rsaKey)
require.NoError(t, h.c.ReloadConfigString(h.config()))
require.NoError(t, h.c.ReloadConfigString(h.config()).Err)
_, got := h.connect(t)
assert.Equal(t, want.Marshal(), got.Marshal())
@@ -180,7 +200,7 @@ func TestSSHDReload_NotRunningRestarts(t *testing.T) {
h.server.Stop()
require.Eventually(t, func() bool { return !h.server.Running() }, 5*time.Second, 10*time.Millisecond)
require.NoError(t, h.c.ReloadConfigString(h.config()))
require.NoError(t, h.c.ReloadConfigString(h.config()).Err)
require.Eventually(t, h.server.Running, 5*time.Second, 10*time.Millisecond)
h.connect(t)
}
@@ -191,6 +211,30 @@ func TestSSHDReload_BadHostKeyFileStops(t *testing.T) {
h.connect(t)
require.NoError(t, os.WriteFile(h.keyFile, []byte("not a key"), 0o600))
require.NoError(t, h.c.ReloadConfigString(h.config()))
assert.True(t, h.c.ReloadConfigString(h.config()).Failed)
require.Eventually(t, func() bool { return !h.server.Running() }, 5*time.Second, 10*time.Millisecond)
}
// A trusted CA or authorized user that is skipped with a warning fails the reload, the valid ones are still used
func TestSSHDReload_SkippedEntriesFail(t *testing.T) {
cases := map[string]string{
"bad trusted ca": " trusted_cas: [nope]\n",
"user entry not a map": " - nope\n",
"user missing": " - keys: [nope]\n",
"bad key": " - user: other\n keys: nope\n",
"key in a list not a string": " - user: other\n keys: [5]\n",
"bad key in a list": " - user: other\n keys: [nope]\n",
"keys missing": " - user: other\n",
}
for name, extra := range cases {
t.Run(name, func(t *testing.T) {
h := newSSHDReloadHarness(t)
h.extra = extra
res := h.c.ReloadConfigString(h.config())
require.NoError(t, res.Err)
assert.True(t, res.Failed)
require.Eventually(t, h.server.Running, 5*time.Second, 10*time.Millisecond)
h.connect(t)
})
}
}
+2 -1
View File
@@ -99,9 +99,10 @@ func newStatsServerFromConfig(ctx context.Context, l *slog.Logger, c *config.C,
emitStats: emitStats,
}
c.RegisterReloadCallback(func(c *config.C) {
c.RegisterReloadCallback(func(c *config.C, r *config.Reload) {
if err := s.reload(c, false); err != nil {
s.l.Error("Failed to reload stats from config", "error", err)
r.Failed()
}
})
+3 -2
View File
@@ -43,7 +43,8 @@ type Conn interface {
// its own packet, so a short count means some peers were undeliverable, not that the batch failed.
// Not safe for concurrent use on the same Conn.
WriteBatch(bufs [][]byte, addrs []netip.AddrPort) (int, error)
ReloadConfig(c *config.C)
// ReloadConfig applies the listen settings that can change, r is nil at startup
ReloadConfig(c *config.C, r *config.Reload)
SupportsMultipleReaders() bool
Close() error
}
@@ -68,7 +69,7 @@ func (NoopConn) WriteTo(_ []byte, _ netip.AddrPort) error {
func (NoopConn) WriteBatch(bufs [][]byte, _ []netip.AddrPort) (int, error) {
return len(bufs), nil
}
func (NoopConn) ReloadConfig(_ *config.C) {
func (NoopConn) ReloadConfig(_ *config.C, _ *config.Reload) {
return
}
func (NoopConn) Close() error {
+6
View File
@@ -24,6 +24,12 @@ type NetworkChangeMonitor struct {
// NewNetworkChangeMonitor builds a monitor for local network changes. The returned monitor is always usable: Start
// is safe to call unconditionally, it no-ops when disabled or on a platform that does not need it.
func NewNetworkChangeMonitor(ctx context.Context, l *slog.Logger, c *config.C) *NetworkChangeMonitor {
if watchesNetworkChanges {
c.RegisterReloadCallback(func(c *config.C, r *config.Reload) {
r.RestartRequiredIfChanged("listen.rebind_on_network_change")
})
}
return &NetworkChangeMonitor{
l: l,
ctx: ctx,
+3
View File
@@ -13,6 +13,9 @@ import (
"golang.org/x/sys/unix"
)
// watchesNetworkChanges is true where Start does anything
const watchesNetworkChanges = true
const (
// netChangeSettleWindow is how long we keep swallowing routing messages after the first interesting one. A
// single network change is never a single message, it is a burst: the link drops, addresses go away, new ones
+3
View File
@@ -7,6 +7,9 @@ import (
"log/slog"
)
// watchesNetworkChanges is true where Start does anything
const watchesNetworkChanges = false
// watchNetworkChanges is a no-op outside of darwin.
//
// Darwin is the platform that scopes a udp socket to the interface it came up on, so it is the platform whose socket
+16
View File
@@ -37,3 +37,19 @@ func TestNetworkChangeMonitorNilRebindIsANoOp(t *testing.T) {
m := newMonitor(t, context.Background(), "listen:\n rebind_on_network_change: true\n")
m.Start(nil)
}
// The monitor only reads listen.rebind_on_network_change when it is made
func TestNetworkChangeMonitorRestartKey(t *testing.T) {
l := test.NewLogger()
c := config.NewC(l)
require.NoError(t, c.LoadString("listen:\n rebind_on_network_change: true\n"))
NewNetworkChangeMonitor(context.Background(), l, c)
res := c.ReloadConfigString("listen:\n rebind_on_network_change: false\n")
require.NoError(t, res.Err)
if watchesNetworkChanges {
assert.Equal(t, []string{"listen.rebind_on_network_change"}, res.RestartKeys)
} else {
assert.Empty(t, res.RestartKeys, "the setting does nothing here")
}
}
+4 -2
View File
@@ -26,7 +26,9 @@ type bypassConn struct {
session *wfp.Session
}
func (b *bypassConn) ReloadConfig(c *config.C) {
func (b *bypassConn) ReloadConfig(c *config.C, r *config.Reload) {
// Only read on the first call, at startup
r.RestartRequiredIfChanged("listen.windows_bypass_wdf")
b.installOnce.Do(func() {
if !c.GetBool("listen.windows_bypass_wdf", true) {
return
@@ -45,7 +47,7 @@ func (b *bypassConn) ReloadConfig(c *config.C) {
"port", addr.Port())
b.session = s
})
b.Conn.ReloadConfig(c)
b.Conn.ReloadConfig(c, r)
}
func (b *bypassConn) Close() error {
+1 -1
View File
@@ -171,7 +171,7 @@ func (u *StdConn) LocalAddr() (netip.AddrPort, error) {
}
}
func (u *StdConn) ReloadConfig(c *config.C) {
func (u *StdConn) ReloadConfig(c *config.C, r *config.Reload) {
// TODO
}
+1 -1
View File
@@ -73,7 +73,7 @@ func (u *GenericConn) LocalAddr() (netip.AddrPort, error) {
}
}
func (u *GenericConn) ReloadConfig(c *config.C) {
func (u *GenericConn) ReloadConfig(c *config.C, r *config.Reload) {
}
+31 -2
View File
@@ -246,6 +246,18 @@ func getFrom(names [][]byte, i int, isV4 bool) netip.AddrPort {
}
func (u *StdConn) ListenOut(r EncReader, flush func()) error {
return u.listenOut(r, flush, nil)
}
// ListenOutHandoff is ListenOut for a reader that keeps the packets: after each batch, handoff takes the batch's
// buffers and returns replacements, of the same count and at least the same size, to receive the next one into.
func (u *StdConn) ListenOutHandoff(r EncReader, handoff func(bufs [][]byte) [][]byte) error {
return u.listenOut(r, nil, handoff)
}
// listenOut is the receive loop. After each batch it calls flush, or with handoff set, hands the batch's buffers
// over and points the recvmmsg iovecs at the ones it gets back.
func (u *StdConn) listenOut(r EncReader, flush func(), handoff func(bufs [][]byte) [][]byte) error {
bufSize := MTU
cmsgSpace := 0
if u.groSupported {
@@ -283,7 +295,21 @@ func (u *StdConn) ListenOut(r EncReader, flush func()) error {
deliverSegments(r, from, payload, segSize)
}
flush()
if handoff == nil {
flush()
continue
}
next := handoff(buffers)
if len(next) != len(buffers) {
panic(fmt.Sprintf("udp: handoff returned %d buffers, need %d", len(next), len(buffers)))
}
for i := range next {
if len(next[i]) < bufSize {
panic(fmt.Sprintf("udp: handoff buffer is %d bytes, need %d", len(next[i]), bufSize))
}
msgs[i].Hdr.Iov.Base = &next[i][0]
}
buffers = next
}
}
@@ -392,7 +418,7 @@ func writeSockaddr(buf []byte, addr netip.AddrPort, isV4 bool) (int, error) {
return unix.SizeofSockaddrInet6, nil
}
func (u *StdConn) ReloadConfig(c *config.C) {
func (u *StdConn) ReloadConfig(c *config.C, r *config.Reload) {
b := c.GetInt("listen.read_buffer", 0)
if b > 0 {
if err := u.SetRecvBuffer(b); err == nil {
@@ -403,6 +429,7 @@ func (u *StdConn) ReloadConfig(c *config.C) {
}
} else {
u.l.Error("Failed to set listen.read_buffer", "error", err)
r.Failed()
}
}
@@ -416,6 +443,7 @@ func (u *StdConn) ReloadConfig(c *config.C) {
}
} else {
u.l.Error("Failed to set listen.write_buffer", "error", err)
r.Failed()
}
}
@@ -430,6 +458,7 @@ func (u *StdConn) ReloadConfig(c *config.C) {
}
} else {
u.l.Error("Failed to set listen.so_mark", "error", err)
r.Failed()
}
}
}
+31
View File
@@ -0,0 +1,31 @@
//go:build linux && !android && !e2e_testing
package udp
import (
"net/netip"
"os"
"testing"
"github.com/slackhq/nebula/config"
"github.com/stretchr/testify/assert"
"github.com/stretchr/testify/require"
)
// A setting the kernel refuses fails the reload
func TestReloadConfig_RefusedSettingFailsTheReload(t *testing.T) {
if os.Geteuid() == 0 {
t.Skip("root may set listen.so_mark, run as an unprivileged user")
}
conn, err := NewListener(testLogger(), Settings{Listen: netip.MustParseAddrPort("127.0.0.1:0"), Batch: 1})
require.NoError(t, err)
t.Cleanup(func() { _ = conn.Close() })
c := config.NewC(testLogger())
require.NoError(t, c.LoadString("listen:\n port: 0\n"))
c.RegisterReloadCallback(conn.ReloadConfig)
res := c.ReloadConfigString("listen:\n port: 0\n so_mark: 42\n")
require.NoError(t, res.Err)
assert.True(t, res.Failed)
}
+1 -1
View File
@@ -351,7 +351,7 @@ func (u *RIOConn) Rebind() error {
return nil
}
func (u *RIOConn) ReloadConfig(*config.C) {}
func (u *RIOConn) ReloadConfig(*config.C, *config.Reload) {}
func (u *RIOConn) Close() error {
if !u.isOpen.CompareAndSwap(true, false) {
+13 -4
View File
@@ -183,21 +183,30 @@ func (u *TesterConn) WriteBatch(bufs [][]byte, addrs []netip.AddrPort) (int, err
}
func (u *TesterConn) ListenOut(r EncReader, flush func()) error {
// The batcher borrows plaintext decrypted in place inside p.Data
// until Flush, so the packet must stay alive across flush()
return u.listenOut(r, func(p *Packet) { flush() })
}
// ListenOutHandoff hands each packet's buffer over, the replacement goes back to the pool.
func (u *TesterConn) ListenOutHandoff(r EncReader, handoff func(bufs [][]byte) [][]byte) error {
return u.listenOut(r, func(p *Packet) { p.Data = handoff([][]byte{p.Data})[0] })
}
func (u *TesterConn) listenOut(r EncReader, finish func(*Packet)) error {
for {
select {
case <-u.done:
return os.ErrClosed
case p := <-u.RxPackets:
r(p.From, p.Data[:len(p.Data):len(p.Data)])
// The batcher borrows plaintext decrypted in place inside p.Data
// until Flush, so the packet must stay alive across flush()
flush()
finish(p)
p.Release()
}
}
}
func (u *TesterConn) ReloadConfig(*config.C) {}
func (u *TesterConn) ReloadConfig(*config.C, *config.Reload) {}
func NewUDPStatsEmitter(_ []Conn) func() {
// No UDP stats for non-linux