Upadte some notes.

code/hostapd.conf

@@ -0,0 +1,13 @@
+interface=wlp0s20f0u1
+driver=nl80211
+ssid=t3u
+hw_mode=g
+channel=1
+macaddr_acl=0
+auth_algs=1
+ignore_broadcast_ssid=0
+wpa=3
+wpa_passphrase=11help22help33
+wpa_key_mgmt=WPA-PSK
+wpa_pairwise=TKIP
+rsn_pairwise=CCMP

code/make_ap.sh

@@ -1,7 +1,22 @@
 #! /bin/env bash
-nmcli con add type wifi ifname wlp44s0 mode ap con-name WIFI_AP_TEST ssid MY_AP_TEST && 
+
+TYPE="wifi"
+IFNAME="wlp0s20f0u1"
+CONNAME="T3UminiConn"
+SSID="T3Umini"
+BAND="bg"
+CHAN=1
+KMGMT="wpa-psk"
+PSK=11223344
+
+nmcli con add type wifi ifname wlp0s20f0u1 mode ap con-name WIFI_AP_TEST ssid MY_AP_TEST && 
 nmcli con modify WIFI_AP_TEST 802-11-wireless.band bg && 
 nmcli con modify WIFI_AP_TEST 802-11-wireless.channel 1 &&   
 nmcli con modify WIFI_AP_TEST 802-11-wireless-security.key-mgmt wpa-psk &&   
+nmcli con modify WIFI_AP_TEST 802-11-wireless-security.pairwise ccmp &&
 nmcli con modify WIFI_AP_TEST 802-11-wireless-security.psk 11223344 &&   
 nmcli con modify WIFI_AP_TEST ipv4.method shared &&   nmcli con up WIFI_AP_TEST
+
+' nmcli con modify WIFI_AP_TEST 802-11-wireless-security.proto rsn &&
+nmcli con modify WIFI_AP_TEST 802-11-wireless-security.group ccmp && NOT USED FOR APPLE`
+

notes/journal/Fri, 15. March 2024.md

@@ -0,0 +1,12 @@
+Plan: Setup wifi adapter to capture Amazon echodot.
+Flow for setting up Access Point:
+1. Setup Access Point
+2. Configure Routing/Bridge or similar so IoT device can access internet.
+
+Tried [linux-wifi-hotspot](https://github.com/lakinduakash/linux-wifi-hotspot) repo. Running it makes AP visible to iPhone, but issue is IP Address. Need to configure dhcp server or manually assign address. 
+
+Problem: Wifi Adapter In monitor mode sees nothing.
+Neither Adapter has driver for modern macos
+Archer T3U is using rtw_8822bu driver from kernel, this supports mac
+
+Decide to go down hostapd route.

notes/journal/Mon, 11. March 2024.md

@@ -1,19 +1,11 @@
-# Mon, 11. March 2024
-[[11032024]] 
 ### Completed:
 - All Devices unpacked except [[xiaomi tv stick]].
 - [[ledvance led strip]] wont enter pairing mode. 
 - [[echodot]] is setup and works.
 - [[mi 360 home security camera]] needs microsd card.
-
 ## Plan for this week:
 - Get microsd card
 - MAINLY: Get AP working or find other way to capture traffic. 
 ## Misc.:
 Much time lost resetting router. [[ledvance led strip]] will only connect to 2.5GHz networks.
-If laptop is connected to internet via ethernet, then I can make a AP, but iPhone wont connect to it. But IoT devices connect
-
-# Tue, 12. March
-- Bought two USB Wifi Adapters:
-	- tp-link AC1300 Archer T3U (Mini Wireless MU-MIMO USB Adapter)
-	- tp-link AC1300 Archer T3U Plus (High Gain Wireless Dual Band USB Adapter)
+If laptop is connected to internet via ethernet, then I can make a AP, but iPhone wont connect to it. But IoT devices connect

notes/journal/Tue, 12. March.md

@@ -0,0 +1,4 @@
+
+- Bought two USB Wifi Adapters (Completes [[TODO1]]):
+	- tp-link AC1300 Archer T3U (Mini Wireless MU-MIMO USB Adapter). 
+	- tp-link AC1300 Archer T3U Plus (High Gain Wireless Dual Band USB Adapter)

notes/todo.md

@@ -1,4 +0,0 @@
-1. Need microsd card for Mi 360 home camera
-2. Cannot get Ledvance LED strip into discovery mode s.t. connection could be established
-3. Have not managed to setup AP/Hotspot: Amazon echodot needs iOS app but iPhone will not connect to AP on fedora Laptop
-4. ~~Ask Valentyna/Nima for other approach to capture traffic~~ Preliminary Fix: USB Plugable Wifi Adapters.

notes/todos/todo.md

@@ -0,0 +1,4 @@
+- [ ] [[TODO1]] Need microsd card for Mi 360 home camera
+- [ ] Cannot get Ledvance LED strip into discovery mode s.t. connection could be established
+- [ ] Have not managed to setup AP/Hotspot: Amazon echodot needs iOS app but iPhone will not connect to AP on fedora Laptop
+- [x] ~~Ask Valentyna/Nima for other approach to capture traffic~~ Preliminary Fix: USB Plugable Wifi Adapters.

notes/wiki/AP configuration.md

@@ -0,0 +1,6 @@
+# Using NetworkManager
+See [here](https://variwiki.com/index.php?title=Wifi_NetworkManager#Configuring_WiFi_Access_Point_with_NetworkManager). Can use the command line tool [[nmcli]].
+
+# Using [[hostapd]]
+Must first make sure that the interface is not managed by nmcli, see [[nmcli]].
+

notes/wiki/Tools.md

@@ -1,5 +1,9 @@
-# WiFi 
-## Wifi Adapter not found anymore
+# Wifi Tools
+- [[aircrack-ng]]can easily enable monitor mode
+- [[nmcli]] NetworkManager cli
+- [[hostapd]]
+- [[iw]] 
+# Wifi Adapter not found anymore
 - __Issue__: After using `airmon-ng` to put my wifi adapter into monitor mode and then supposedly back into normal mode: network manager couldn't find wifi adapter anymore.
 - `sudo nmcli dev` showed that `wlp44s0` interface was "unmanaged".
 - __Fix__: `sudo nmcli set wlp44s0 managed yes` 

notes/wiki/iw.md

@@ -0,0 +1,10 @@
+***TLDR***: show / manipulate wirless devices and their configs.
+
+# Commands used:
+- `iw list` shows extensive info about all wirless devices. 
+- To check if any devices is AP ready:
+```bash
+iw list | grep -i ap -A 5 -B 5
+```
+
+

notes/wiki/monitoring.md

@@ -0,0 +1,19 @@
+***TLDR:*** How to monitor/sniff wifi network traffic of IoT Devices. Two strategies:
+Use a wifi adapter to setup an #AP and have the devices connect to via that or use wifi card in monitor mode.
+
+# Funnel traffic via AP
+**Issues**: iPhone has problems connecting to the provided APs. But need iPhone to configure network  connection of devices.
+# Monitor Mode
+--- 
+## HowTo 
+Insert wifi adapter and make sure it shows up as a interface with e.g. `nmcli dev`.
+### Manually activate:
+1. Find out which interfaces already exist with names like`mon_N_`: `ifconfig -a`. 
+2. `iw dev _interface_ interface add _mon_num_ type monitor` 
+3. `ifconfig _mon_num up` 
+### Using [[aircrack-ng]] :
+Activate monitor mode on interface `wlp0s20f0u1`:
+```bash
+sudo airmon-ng start wlp0s20f0u1
+```
+Output:

notes/wiki/nmcli.md

@@ -0,0 +1,20 @@
+***TLDR:*** Command line utility of NetworkManager
+Benefit: Automates setting up WiFi, DHCP server and NAT config, according to [here](https://variwiki.com/index.php?title=Wifi_NetworkManager#Configuring_WiFi_Access_Point_with_NetworkManager) . 
+
+# Commands
+```bash
+nmcli dev #list network devices
+```
+```bash
+nmcli con down <name> # disable AP config
+```
+```bash
+nmcli con delete <name> # permanently delete AP configuration
+```
+```bash
+sudo systemctl restart NetworkManager # for config changes to take effect
+```
+```bash
+sudo nmcli device set <interface-name> managed no # make sure itnerface is not managed by NetworkManager. Can use d instead of device.
+```
+